screw conveyor design speed calculator
TRANSCRIPT
Bulk Handling Global
Bulk solids and powder flow properties testing, silo and hopper design, discharge and conveyortechnology
www.bulksolidsflow.com/
Solutions for storage and flow of solids . . . . It's all about flow
Screw conveyor speed calculation (For horizontal conveyors)
18/05/2013
Inputs
Select product
Average particle size 5mm and under
Product flowability Slugish
Abrasiveness Extremely abrasive
Usual minimum bulk density 1760 kg/m3
Usual maximum bulk density 2080 kg/m3
Suggested conveyor fill level 15 % of spiral
volume
Required Tonnage Rate (TPH) 10.0 TPH
Spiral outside diameter (mm) 800 mm
Centertube diameter (mm) 152.4 mm
Spiral pitch (mm) 609.6 mm
Spiral thickness (mm) 9.61 mm
Note - Type in respective value inside of coloured cell, then click outside cell to enter.
Results
Volumetric capacity 5.68 m3/hr at minimum bulk density
4.81 m3/hr at maximum bulk density
Spiral speed 2.3 rpm to suit minimum bulk density
Spiral peripheral speed 0.10 m/s
Sand Dry Bank Damp
Bulk Handling Global - Online SCREW CONVEYOR design speed calculator http://www.bulksolidsflow.com/free_programs/screw_conveyor_design/s...
1 de 1 18/05/2013 01:28 p.m.