scw unit specific
DESCRIPTION
SCW UNIT SPECIFIC. 101 admin/command control. 101 ADMINISTRATION/COMMAND AND CONTROL FUNDAMENTALS References: [a] NWP 4-04.1, U.S. Navy, Seabee Operations in the MAGTF [b] NAVEDTRA 14235, Seabee Combat Handbook, Vol. 2 [c] 1NCD TACMEMO 4-01.01-07 - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/1.jpg)
![Page 2: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/2.jpg)
101 admin/command control101 ADMINISTRATION/COMMAND AND
CONTROL FUNDAMENTALSReferences:[a] NWP 4-04.1, U.S. Navy, Seabee Operations in the
MAGTF[b] NAVEDTRA 14235, Seabee Combat Handbook, Vol.
2[c] 1NCD TACMEMO 4-01.01-07[d] NAVEDTRA 14234, Seabee Combat Handbook, Vol.
1[e] Blue Jackets’ Manual, 23rd Edition[f] http://www.navy.mil/navydata[g] NAVFAC P-315, Naval Construction Force Manual
![Page 3: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/3.jpg)
101101.1 Discuss the function and organization
of the following companies within the battalion: [ref g, ch. 8)
![Page 4: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/4.jpg)
101a. Alfa [p. 6-9] Responsible for the operation and maintenance of
the automotive, construction and materials-handling equipment assigned to the battalion.
b. Bravo [p. 10-12]Responsible for water, sanitary sewer, and power
distribution systems, fuel systems, and communications projects.
Bravo company serves as a mini public works department providing for maintenance and operation of the unit’s camp.
![Page 5: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/5.jpg)
101
![Page 6: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/6.jpg)
101c. Charlie/Delta [p. 12-14] Act as the NMCB's general construction company.Responsible for prime contracts and an occasional
subcontract; normally equal in strength and capabilities; they function as prime contractors for vertical construction.
d. Headquarters [p. 5-6] Is the administrative and military organization for all
enlisted personnel assigned to the NMCB's executive and special staffs.
The Headquarters Company provides support to the line
companies in construction and disaster recovery operations.
![Page 7: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/7.jpg)
101
![Page 8: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/8.jpg)
101101.2 Describe the mission of Convoy
Security Element (CSE). [ref. c]A specially trained mobile unit to act as
security escort for convoys and utilized to assist with camp security.
A specially trained mobile unit to act as
security escort for convoys and utilized to assist with camp security.
![Page 9: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/9.jpg)
101
![Page 10: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/10.jpg)
101.3 State the purpose of and describe the
following:a. Combat Operation Center (COC) [ref. b, pp.
1-6 thru 1-16] The COC is used to maintain command
and control of battalion in tactical environment. Manned by watch standers at CBR, Operations,
and Fire Support Coordinator board, plus communicators and watch officer.
![Page 11: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/11.jpg)
101
![Page 12: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/12.jpg)
101b. Alternate Combat Operation Center
(ACOC) [ref. b, p. 1-8] Alternate COC--requires same information
and set-up as COC; assumes control of battalion if COC is destroyed
c. Company Command Post (CP) [ref. a, ch. 5] Localized version of the COC at Company
level.
![Page 13: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/13.jpg)
101d. Air Detachment (AIRDET) [ref. a, pp. 2-10,
2-11] Can accomplish all missions of a battalion,
but on a smaller scaleNMCB Rapid Response Force89 personnel, 35-45 pieces of CESE, but
usually task organizedReady to fly in 48 hours from receipt of a
warning order
![Page 14: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/14.jpg)
101101.4 Identify and explain the purpose of the
following ratings in a Naval Mobile Construction Battalion (NMCB): [ref. e, pp. 23 thru 35]
![Page 15: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/15.jpg)
101SKStorekeeper, works in the supply department.
Operates and monitors MLORPReligious person. Armed escort for the Chaplain.BMBosunmate. Skilled in all tasks pertaining to deck
equipment on a ship.SHShips serviceman. Handles the ships store and
laundryCSCulinary Specialist. Sets up and operates field
kitchens
![Page 16: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/16.jpg)
101Legalman.MRMachinery repairmanMAMaster at Arms. Acts as a police force within
the battalion.NCNaval Career Counselor
![Page 17: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/17.jpg)
101YNYeoman. Works in the admin office.PNPersonnel man.Works in adminHT Hull technician, skilled in welding.HM Corpsman, first aid specialist
![Page 18: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/18.jpg)
101PCPostal clerkETElectronics technicianGM Gunners mate. Maintains weapons and
operates armory. IT Intelligence tech, specialist in computers
and communications.
![Page 19: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/19.jpg)
102 supply/logistics102 SUPPLY/LOGISTICS
FUNDAMENTALSReferences:[a] ABFC View
![Page 20: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/20.jpg)
102102.1 State the purpose of the NMCB Table of
Allowance (TOA) as it relates to thefollowing: [ref. a] a. P25SMARTThe NMCB TOA is listed as the P25 and is broken
down into three sub-TOAs to assist in quick deployment
Air Det (A/D): P25A or TA-41Air Echelon (A/E): P25C or TA-31Sea Echelon (S/E): P25D or TA-22
![Page 21: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/21.jpg)
102
![Page 22: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/22.jpg)
102b. P32 TOA for construction capability augment for
the Naval Expeditionary force.
![Page 23: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/23.jpg)
103 coms and security 103 COMMUNICATIONS/COMMUNICATIONS SECURITY MATERIAL SYSTEM FUNDAMENTALS References: [a] NAVEDTRA 14234, Seabee Combat Handbook, Vol. 1 [b] TM-11-5820-890-10-8, SINCGARS Ground Combat Net Radio, ICOM [c] Construction Battle Skills Guide, P-1160, Book 1, All Hands [d] Motorola 68P81044C05-A, XTS 5000 Operator’s Guide [e] NAVEDTRA 14235, Seabee Combat Handbook, Vol. 2 [f] Harris Guide 10515-0103-4100 (Rev. A), AN/PRC-150(V)(C), Man Pack Radio (Operator’s Manual) [g] TM 11-5805-749-12, Switchboard, Telephone, SB-3614A(V)/TT Operator’s Manual [h] TM 11-5805-650-12, Telephone Set, T-838/PT Operator’s and Organizational Maintenance Manual [i] COMFIRSTNCDINST 2000.2 COMMUNICATIONS INFORMATION SYSTEMS
POLICY AND PROCEDURES [j] Harris Guide 10515-0109-4100 (Rev. J), AN/PRC-117(V)(C), Man Pack Radio (Operator’s Manual) [k] ref MCWD 3-40.3 Communications and Information Systems
![Page 24: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/24.jpg)
103
![Page 25: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/25.jpg)
103103.1 Explain the frequency spectrum,
configurations, operator maintenance, and antenna
systems/ranges for the following:
![Page 26: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/26.jpg)
103a. AN/PRC-119A-E [ref. c, p. 358]VHF SINCGARS Radio30 to 87.975 MHz freq2320 channels/freq.'s Sends and receives secure voice and digital data6 Comsec channels/ 6 Frequency hopping channels8 Single Channels (SC) for plain textTransmits 200 meters to 10 Kilometers or moreBatteries last 4 (BB690) to 30 (BA5590) hrs depending
on type & use
![Page 27: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/27.jpg)
103Antenna Systems:3ft Tape- up to 5 miles10ft whip- up to 10 milesOE-254- up to 36 miles
![Page 28: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/28.jpg)
103b. AN/PRC-150 [ref. f, pp. 1-1 thru 1-8] HF- usably range up to 1000 miles. Puts out up to 20 watts Deployed in backpack configuration.. Uses as wireless messaging terminal (WMT)Uses Microsoft Outlook to send e-mail5 units in TOA
![Page 29: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/29.jpg)
103c. AN/PRC-117VHF SINGARS 30 MHZ to 2 GHZ 10 watts VHF and 20 watts UHF Manpack or vehicle mount Range 10-25 Km (clear line of sight)
![Page 30: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/30.jpg)
103d. AN/VRC-90A [ref. b, p. 2-19] Vehicular SINGARS systemSingle RT1523 with power ampRange 40-59 Kilometer depending on antenna
system.Antenna Systems: 3900 OE-254
![Page 31: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/31.jpg)
103e. VHF handheld SABER 1 fascinator [ref. d,
p. 1]Handheld secure radioVHF radio with 2.5 - 6 wattsNeed radio interface box to fillVHF - 138 to 174 MHz Range - 1 to 3 miles
![Page 32: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/32.jpg)
103Operator MaintenanceClean and corrosion freeEnsure all knobs and switches function
correctlyCheck antenna for cracks and splitsEnsure battery charger contacts are not
broken
![Page 33: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/33.jpg)
103 Hand held secure VHF radio replacing
SABER. 1-6 watts output 48 channels Range 1-3 miles Programmable from 136-174 MHz Surveillance modef. XTS-5000 portable radio [ref. d]) Over the air rekeying (OTAR) capability
![Page 34: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/34.jpg)
103103.2 Discuss the general characteristics,
operator maintenance and employment of thefollowing wire communication assets:
![Page 35: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/35.jpg)
103a. SB-3614A [ref. g]Switchboard.12 slots for TA-312’sProgrammable SBCan assign priority circuitsAllows operator to make unassisted phone callsUp to 30 circuits.DSN capabilities.
![Page 36: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/36.jpg)
103b. TA-312/PT [ref. c, p. 354] Two wire tactical phone.Operates on 2 D cell batteriesRange 14 miles wet and 22 miles dryTalk up to 4 miles in earpiece with dead
batteryPress to talk handsetHand crank to call distant stations.
![Page 37: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/37.jpg)
103c. TA-838/PT [ref. h] Analog field phoneReplaced by TA-312
![Page 38: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/38.jpg)
103d. AN/GRA-39 ref. a, pp. 11-12, 11-13] Provides capability to remotely operate
radios from up to 2 miles awayPowered by 12 D cell batteriesRemote unit located in COC/CPLocal unit located at antenna farm
![Page 39: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/39.jpg)
103e. TA-1Hand held Comm deviceUses WD-1 wireTalks 4-7 milesSqueeze signal generatorPress to talk buttonLight weight and easy to storeNormally configured in gun loop
![Page 40: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/40.jpg)
103Operator MaintenanceRemove dirt and moisture from housing, handset,
cord, or connector. Inspect painted surfaces for bare spots, rust or corrosion.
Inspect surfaces for cuts or cracks. Inspect handset cord for breaks, cuts or
deterioration. Inspect for inoperative binding posts, broken
connector, or hand set connection.
![Page 41: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/41.jpg)
103f. SB-22 12 line switchboardOperator uses headsetHand ringing generatorCan interconnect calls29 line packs when stackedUses 4 D cell batteries when used with operator
packAudio/visual call indication
![Page 42: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/42.jpg)
103103.4 Discuss the tactical employment and
purpose of NMCB communication systems.[ref. i, pp. 5-1 thru 5-5/ e, pp. 1-10 thru 1-14]
![Page 43: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/43.jpg)
103Tactical Employment Loops:Rifleman-Fireteam Leader-SQD Leader-PLT
LeaderCompany CP-COC-Regiment/ MAGTAF Purpose: Strong coordination between
rifleman up to MAGTAF and beyond can ensure a victorious outcome for any combat mission assigned to a Seabee organization.
![Page 44: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/44.jpg)
103.5 Discuss the procedure for Loading
COMSEC Material into the following RT-1523E,
RT-1694, RT- 1796 [ref. b, pp. 5-29 thru 5-32]
![Page 45: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/45.jpg)
103There are five tasks categorized as primary
for the SINCGARS radio operator, manpack or vehicular and one preparation task for the ASIP
These tasks enable the operator to meet all normal
radio. communications requirements when the unit is in an operational situation
![Page 46: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/46.jpg)
103PRIMARY TASK 1:Required for use of single channel
communications, participation inCold Start net opening, use of CUE and ERF
method of late net entry,and single channel frequency updates.Load COMSEC, FH Data, and Sync Time
into RT Using ICOM Fill
![Page 47: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/47.jpg)
103PRIMARY TASK 2:Required for secure, frequency hopping
communications,participation in Hot Start net opening,
COMSEC/FH data updates, andwithout sync time, participation in Cold Start
net opening.Perform Hot Start Net Opening
![Page 48: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/48.jpg)
103PRIMARY TASK 3:Required when the net has been down, for any reason
and for anyperiod of time, and is now to become operational at a
prescribed time.Operators load their RTs with all required COMSEC
keys, FH data, andsync time. At the prescribed time, they call the NCS
and enter the net.The Hot Start procedure may also be used when an
individual operatorhas been out of the net for any reason and wishes to
re-enter withoutresort to the CUE and ERF method of late net entry.
![Page 49: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/49.jpg)
103PRIMARY TASK 4:Perform Passive Late Net EntryRequired when an operator's radio sync time
becomes greater than plus or minus 4 seconds, but not more than one minute, different from net sync time. The Passive Late Net Entry process enables an operator
to re-enter the net without requiring action on the part of the NCS or other net operators.
![Page 50: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/50.jpg)
103PRIMARY TASK 5:Obtain SOI information from ANCDSOI information electronically stored in the
ANCD replaces the paper SOI extract. The ANCD SOI program is used when Information on nets, suffixes, pyro/smoke, sign/countersign is needed. It may be used to view quick reference (QREF) related items in group, time period, set, find, and memo. It may also be used to obtain the net ID of a net that is not a part of the loadset being used.
![Page 51: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/51.jpg)
1035.4c. Select RT Preparation Settings from MENU
(Preparation TASK 1)DESCRIPTIONThis task is required to set the ASIP radio to proper
settings for othertasks. MENU selections are Volume, Channel, Power, Mode
andCOMSEC. These settings will need to change as
operationallynecessary. The backlight function is also covered. CMSC settingBacklight lights (4 settings Low to High, then OFF)
![Page 52: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/52.jpg)
103(1) Place RT on SQ Set Backlight (2) Press FREQ/Backlight(3) Press CHG until desired setting Default Settings are: VOL (5), CHAN (1),
PWR (LO), MODE (FH), COMSEC (CT}SEC
![Page 53: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/53.jpg)
103KYK-13Common Fill Device (CFD)Electronic transfer/fill deviceHolds up to six Crypto segmentsLoads auxiliary COMSEC gear
![Page 54: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/54.jpg)
103.6 Discuss the following communication and
information systems planning factors:[ref k]
![Page 55: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/55.jpg)
103a. Mission Communication equipment necessary will
depend on what kind of mission assigned to the unit.
Ranges, distance and terrain should be taken into consideration.
![Page 56: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/56.jpg)
103b. Available resources TOA availability c. EnvironmentalTerrain and weather will affect the ability to
operate communication Equipment.
![Page 57: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/57.jpg)
103Field radios are for line-of-sight
communications. Any obstruction between the transmitting station and the receiving station may disrupt or block communications.
Factors such as valleys, densely wooded areas,
towers, low lying areas, and sources of electrical interference are common obstructions that have an adverse effect on radio communications.
![Page 58: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/58.jpg)
104 weapons104 WEAPONS FUNDAMENTALSReferences:[a] NAVEDTRA 14234, Seabee Combat
Handbook, Vol. 1[b] Smart P25 ABFC View[c] 31st SRG Trainee Guide 956.1
![Page 59: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/59.jpg)
104
![Page 60: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/60.jpg)
104 weaponsThe following items apply to the 84mm M136 (AT-4): 104.1 Describe the 84mm M136 (AT-4). [ref. a, pp.
14-20]LightweightSelf contained anti-armor weaponFree flight fin stabilized cartridge packed in an
expendable launcherOne pieceRight shoulder fired onlyMan-portable
![Page 61: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/61.jpg)
104 .2 Describe the different firing positions. [ref. a, pp. 14-30 thru 14-
32] Standing Used when firing on moving or stationary targets from
behind a protective barrier such as a wall or barricade. Most unstable and exposed position.
Kneeling Used for firing on moving or stationary targets. Maximum use of support is essential for stability
Sitting Used for firing on stationary targets. More suitable than
kneeling position. Prone The least stable position. Affords the most protection. The danger area extends for 60m with a 90 degree angle behind the
weapon The weapon must not have any obstructions closer than 5 m to the
rear of the weapon.
![Page 62: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/62.jpg)
104
![Page 63: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/63.jpg)
104.3 State the following capabilities/nomenclature: [ref.
a] a. Length [p. 14-21] 40
inches b. Weight [p. 14-21] 14.8 lbs Fully loaded c. Maximum range 2100 metersd. Maximum effective range 300 meterse. Muzzle velocity 950 fps
![Page 64: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/64.jpg)
104f. ControlsTransport Safety Pin. Blocks the movement
of the firing pin and prevents it from striking the cartridge percussion cap.
Cocking Lever: When the cocking lever is in the SAGE position, there is no contact between the firing rod and the trigger.
Forward Safety. Prevents the firing rod from
striking the firing pin.
![Page 65: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/65.jpg)
104f. Ammunition [p. 14-22] Tactical cartridge, 18 inches long, High explosive, anti-tank (HEAT)
![Page 66: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/66.jpg)
104g. Misfire procedures [pp. 14-26, 14-27] Causes - A complete failure to fire caused by
a faulty firing mechanism or faulty element in the propellant charge.
![Page 67: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/67.jpg)
104Action: Shout “misfire”Maintain sight pictureRelease safety catch–Re-cock the weapon–Check back blast area and attempt to fire Repeat if necessary If still fails, release safety catch and return cocking lever to
the safe position. Reinsert the transport safety pin, lay weapon on ground
and notify chain of command
![Page 68: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/68.jpg)
104i. Safety [pp.14-32, 14-33] Take care in selecting positions for firing.
Avoid areas that could cause you to fire through a screen of brush or trees.
Impact with a twig or branch may deflect the rocket or cause it to detonate.
You must try to obtain concealment, but not at the risk of safety.
![Page 69: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/69.jpg)
104To prevent the rocket from striking the foreground and
causing serious injury to personnel, maintain the launcher in the firing position until the rocket has left the launcher.
Avoid the blast of flame and ejected residue to the rear of the launcher.
Remove flammable material , such as dry vegetation, from the backblast area.
Keep personnel and ammunition clear of the rear danger area unless adequate shelter protection is provided.
Sand or loose dirt in the backblast area can also reveal your position to the enemy.
Do not fire rockets at temperatures below -40 F or above 140 F.
Never fire a damaged weapon.
![Page 70: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/70.jpg)
104.4 Describe the characteristics of 40mm
machine gun. [ref. c]Air-cooledBelt-fedBlow back operatedAutomatic weaponFires from open bolt positionCrew served
![Page 71: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/71.jpg)
104.5 Discuss loading/unloading procedures. [ref. c]
Keep the weapon down range Make sure the bolt is forward. If not take the
weapon off safe and ease the charging handles forward.
Open the cover Insert the first round through the feed throat
![Page 72: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/72.jpg)
104Place the first round into the feeder. Female
link first. Push the round across the first pawl Move the slide assembly to the leftClose the cover
![Page 73: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/73.jpg)
104Unlock and grasp the charging handles and charge
weapon.UNLOADINGPlace weapon on safe Open cover Remove remaining rounds and inspect chamber Once clear, close coverPlace weapon on fire and use charging handles to
“ride” bolt forward or press trigger sending the bolt forward.
![Page 74: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/74.jpg)
104104.6 State the following
capabilities/nomenclature: a. Proper employment [ref. c] Can be vehicle mounted ground mounted on
tripod Used for indirect fire
![Page 75: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/75.jpg)
104c. Arming range [ref. c] M383 HE
Round 18 to 36 meterM918 TP Round 18 to 30 meters d. Maximum effective range (area target)
1500 mMaximum range 2212m
![Page 76: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/76.jpg)
104e. Maximum effective range (point target)
[ref. c] f. Rate of fire [ref. c] 325 to 375
rds/min g. Safety [ref. c] Thumb switch
with “Safe” and “Fire” positions
![Page 77: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/77.jpg)
104h. Ammunition types [ref. c]
M383 HE - High explosive, designed to inflict personnel casualties. Arming distance of 18 to 36m. 15m casualty radius.
M430 HEDP -High explosive, dual purpose
M385E4/M385A1 - Training Practice with propellant. Max range 2200m
M918 TP - Target round with a flash signature. Max range
2200m M922 Dummy - Inert
![Page 78: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/78.jpg)
105 embark 105 EMBARKATION FUNDAMENTALS References: [a] COMSECONDNCB/COMTHIRDNCBINST 3122.1, Embarkation
Manual [b] COMSECONDNCB/COMTHIRDNCBINST 4627.1, Naval
Construction Force Maritime Prepositioning Force Operations Instruction [c] ABFC View Program,
https://ncf.navy.mil/abfcview/abfcviewabout.cfm [d] MCRP 4-11.3F, Convoy Operations Handbook [e] MCRP 4-11.3H, Convoy Tactical Operations [f] AMC Pamphlet 36-101, Vol. I, AMC Affiliation Program
Equipment Preparation Course [g] JP4-01.3 Joint Tactics, Techniques and Procedures for
Movement Control
![Page 79: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/79.jpg)
105105.1 Explain the operations of the battalion
Mount Out Control Center (MOCC). [ref. a,pp. 3-1] The Mount Out Control Center controls,
coordinates, and monitors the movement of all personnel, supplies, and equipment to the embarkation staging area
![Page 80: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/80.jpg)
105.2 Discuss who is responsible for the
operation of the battalion MOCC. [ref. a, p. 3-1]
The XO is responsible of the operations in MOCC
MOCC controls, coordinates, and monitors the movement of all personnel, supplies and equipment to an embarkation staging area.
![Page 81: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/81.jpg)
105 (.3 State the purpose and the function of
Unit Movement Control Center (UMMC). [ref; g]
Movement control consists of:(a) the planning, routing, scheduling, and
controlling of common-user assets; and (b) maintenance of in-transit visibility (ITV) to assist commanders and staffs in force tracking.
![Page 82: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/82.jpg)
105.4 Describe the duties and responsibilities of
the following key Embark personnel. [ref a. pp. 2-3 thru 2-4]
![Page 83: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/83.jpg)
105a .Embarkation Officer Know location of supplies, vehicles and
equipment assigned to Battalion.Maintain MOCC files.Train personnel and staff.Maintain turnover file.Coordinate with S-3 for all requirements
concerning Battalion movement.Validate preliminary load plan (PLP) for
deployment.Ensure all detachments are assigned qualified
personnel for movement
![Page 84: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/84.jpg)
105b. Embarkation ChiefAdvise and assist Embark Officer with all
requirements listed above.Maintain close liaison with Regiment and
Brigade staff on all embark issues. c. Embarkation LPOAssignment and efficient use of all Battalion
assets for all deployments.Assist Embark Chief will all duties listed
above.
![Page 85: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/85.jpg)
105.5 Explain the procedures to calculate the
center of balance for Civil Engineer SupportEquipment (CESE). [ref. f, pp. 4-6 thru 4-24] The formula is: (W1xD1) + (W2 x D2) divided
by GVW
![Page 86: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/86.jpg)
105105.6 Explain the four types of shoring used during
embarkation operations. [ref. f, ch. 6] a. Sleeper [pp. 6-6, 6-7] Cross bracing and dunnageb. Rolling [p. 6-1] Chocks and dunnage.c. Parking [pp. 6-3 thru 6-6] For tracked vehicles, wood planking laid down to
lock the tracks in place.d. Approaching [p. 6-8] Ramps and dunnage
![Page 87: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/87.jpg)
105.7 Describe movement formations and
techniques of a convoy. [ref e, pp. 3-3 thru 3-
![Page 88: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/88.jpg)
105
![Page 89: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/89.jpg)
105The following are techniques that can be used based on the
situation, roadconditions, and the judgment of the CC.a. File Formation (Figure III-3).(1) Best used with inexperienced or foreign drivers.(2) Advantages:(a) Simplicity.(b) Usable at night but interval will have to be compressed.(c) Minimizes IED blast effects (when driving on centerline
of road).(3) Disadvantages:(a) Weak left flank security.(b) Reduced field of view.(c) Reduced headlight coverage at night
![Page 90: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/90.jpg)
105b. Staggered Formation (figures III-4 and III-
5).(1) Used only on multilane roads.(2) Advantages:(a) Allows for all around security.(b) Greater flexibility.(c) Permits ease of maneuver during contact.(d) Limits third party vehicle interference.(e) Greater headlight coverage at night.
![Page 91: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/91.jpg)
105(3) Disadvantages:(a) Requires more command and control and driver
experience.(b) More vulnerable to IED blast effects
c. Offset Formation (Figure III-6).(1) Used to block third party traffic and assists in changing
lanes.(2) Advantages:(a) Combines flexibility of stagger with the ease of file
Formation.(b) Allows CC to control third party traffic.(3) Disadvantages:(a) Vulnerable to IED blast effects.(b) Difficult to command and control.
![Page 92: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/92.jpg)
105.8 Identify and explain the elements of a
convoy organization. [ref. e, pp 1-9 thru 1-16]Three Divisions March ColumnComposed of entire convoyConvoy Commander in charge Serial ColumnLimited to 20 vehicles Unit ColumnLimited to 10 vehicles or less
![Page 93: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/93.jpg)
105Convoy Commander–initiates, issues and enforces march orders
supervises movementSerial Commander In charge of 20 vehicles,
Supervises serial, Answers to Convoy Commander
Advance Officer Precedes the column, Recons
the route and selects alternate routes, Notifies proper authorities and Post traffic control personnel
![Page 94: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/94.jpg)
105Trail Officer Post warning flags, prevent interference,
enforce convoy discipline, collects traffic control personnel Unit Commander Responsible for 10 units of CESE Maintenance Officer Rides at rear of convoy,
Responsible for CESE maintenance Vehicle Commander–Usually a Petty Officer in charge of all vehicles
carrying troops
![Page 95: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/95.jpg)
105Other Convoy PositionsPace Setter Usually a Petty Officer stationed in
lead vehicle.Guides Personnel posted at critical intersections
when on non-tactical convoys •Escorts Military Police or other personnel for a
non-tactical movement During tactical movements, the escorts may be
armed guards, armed aircraft, infantry, armored units, or other units as required to
protect or accompany the convoy
![Page 96: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/96.jpg)
105.10 Describe vehicle convoy logistics and
security requirements. [ref. e, pp.1-15 thru 2-4]
![Page 97: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/97.jpg)
105Control capabilities will be reduced at night. At the same
time, the convoy’s vulnerability to ambush or harassing fire will be increased. Compromise between the need for both security and control. Increasing the size of security forces for night movement creates a greater noise and control problem. Decreasing the security forces permits better control and noise discipline. Carefully consider the requirements for security and control. Regardless of the choice, most vehicles, including escorts, will be road-bound. If an attack is encountered, the best reaction, as in daytime operations, is dependent upon the type of attack. Dispersion and extended intervals offer the best protection from air and artillery attacks. Rapidly clearing or evading the killing zone, along with a high volume of return fire, is the best protection from ambush. Night immediate-action drills should be rehearsed and all convoy members should receive refresher training in night security and night defensive techniques.
![Page 98: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/98.jpg)
106 contingency ops 106 CONTINGENCY OPERATIONS FUNDAMENTALS References: [a] COMSECONDNCB/COMTHIRDNCBINST 3300.1, Rapid Runway Repair [b] ABFC View Program, https://ncf.navy.mil/abfcview/abfcviewabout.cfm [c] UT Basic Vol 2, p 2-1 [d] CE Basic p 3-21 [e] FM 5-277, Bailey Bridge [f] TM-08676A-23/2, Medium Girder Bridge, Marine Corps [g] AFMAN 10-219, Vol. 4, Rapid Runway Repair Operations [h] NAVEDTRA 14081, Equipment Operator, Basic [i] UFC 3-270-07 Unified Facilities Criteria O&M Airfield Damage Repair [j] CIN-710-1023, Airfield Damage Repair Crew Training Guide [k] Mabey Johnson User Manual [l] Training Guide for Command Post Bunker S-710-1017 [m] Training Guide for Observation Tower S-710-1016 [n] Training Guide Heavy Construction 1 A-710-0044
![Page 99: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/99.jpg)
106106.1 Describe the duties and responsibilities
of the following Rapid Runway Repair(RRR) / Airfield Damage Repair (ADR) teams
and state what type of equipment isnecessary to perform their mission under
Battle Damage Repair (BDR)/RRR. [ref. a, ch. III]
![Page 100: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/100.jpg)
106
![Page 101: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/101.jpg)
106a. MOS [Annex C]After an air base attack, the base commander’s immediate
problem is to launch and recover mission aircraft as soon as possible.
The base engineer must recommend the best airfield surfaces to repair; i.e., those that require the least repair time but still provide adequate launch and recovery surfaces for mission aircraft. The launch and recovery surface selected for repair is
called the minimum operating strip or MOS. The MOS is the area from which aircraft take off and land. When a MOS is combined with access taxiways from aircraft staging areas such as shelters and parking aprons, the entire area becomes the
minimum airfield operating surface (MAOS). The length of the MOS will depend on the take-off or landing distance of the mission aircraft, whichever is greater.
![Page 102: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/102.jpg)
106b. DAT [Annex B] Bomb damage assessment activities are categorized into
two distinct areas: airfield damage repair assessment and facility and utility damage assessment. In this manual, only airfield damage repair assessment is addressed. Airfield damage repair assessment includes evaluation of damage involving runway surfaces, taxiway surfaces, and other facilities that directly support aircraft operations. Since major recovery tasks cannot be started until damage assessment and MOS selection are completed, speed and accuracy during damage assessment are essential. The damage assessment teams (DATs) determine and report the location, types, and numbers of unexploded ordnance, and the location, types, and quantity of airfield pavement damage to the survival recovery center (SRC).
![Page 103: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/103.jpg)
106c. Crater/Spall [Annexes E, F]DEFINITION OF SPALL. A spall is damage that
does not penetrate throughthe pavement surface to the underlying layers.
Spalls may be up to 1.6 m (5 ft) diameter.REPAIR CONCEPT. Repair of a spall requires
few procedures: squaring ofthe edges, cleaning out and removing debris,
apply bonding agent if required, placingthe fill material, finish the surface to provide a
smooth structural bearing surface foraircraft traffic
![Page 104: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/104.jpg)
106Purpose. This section provides guidance on
repair of spalls. Althoughspalls are relatively small, they can be numerous.
Thus, planning for spall repairshould receive close attention.
Concerns:Manufacturer’s instructions. Insure that the
manufacturer’s instructions, or rules of common practice, are strictly followed.
Bonding. The spall area must be prepared thoroughly. Sides should be vertical, loose material removed, and the repair surface clean or coated with a bonding agent if applicable. Bad bonding will result in the patch coming loose.
![Page 105: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/105.jpg)
106MATERIALSConventional Cement/Grout. A conventional
cement grout mixture similar tothat indicated for Stone and Grout crater repair
may be used in spall repair with peagravel substituted for 76-mm (3-in.) stone as the
aggregate. A rapid setting cement(proprietary) must be used to obtain a
compressive strength of 10.3 MPa (1500 psi) in4 hr. Consult the technical representatives for
information on rapid setting cements.
![Page 106: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/106.jpg)
106Cold Mix Products. Tests conducted on a
variety of cold mix patching products have met with limited success. Conventional cold mix asphalt is suitable for
small repairs up to 0.61 m (2 ft) in diameter and 1.83 mm (6 in.) deep. Proprietary patching products can be used for both small and large spall repair; however, both types of materials tend to rut easily
![Page 107: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/107.jpg)
106Proprietary Products. Numerous
commercial-off-the-shelf (COTS) materials are available. Some of these materials, particularly some rapid setting
cements, have been tested and approved for DoD use while others have not. Before any material can be used on DoD airfields, it must be certified for use. Contact your service technical representative for the appropriate material and installation procedures for your particular application
![Page 108: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/108.jpg)
106
![Page 109: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/109.jpg)
106State how many members are to be trained
at a battalion level to satisfy the requirements of RRR.
46 personnel E-6 and below RRR level I trained 20 personnel E-5 and above RRR Level II
trained 6 personnel E-6 and below cretemobile trained
(FOD cover crew leaders)
![Page 110: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/110.jpg)
106106.3 Describe the duties and responsibilities
of a damage assessment team and state what type of equipment is necessary to perform their mission under
Battle Damage Repair (BDR)/RRR.
![Page 111: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/111.jpg)
106The damage assessment team is responsible for the
recording, marking and reporting of all conditions on the taxiway, parking apron, fueling station, and any other collateral damage encountered.
All damage and types of hazards are reported and plotted.
Damage assessment kitMarking tapeNon-metallic tape measuresEOR formsMaps (scale 1” = 100’)
![Page 112: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/112.jpg)
106a. Airfielded Fiberglass Matting (FFM) [ref. g,
p. 5.8.2] [ref. I, p 2-15] Folded fiberglass mat (FFM)/fiberglass
reinforced plastic (FRP) foreign object damage (FOD) covers are suitable only for fighter aircraft and C-130 operations. These FOD covers are not approved for C-17, C-5 Galaxy, C-141 Starlifter, KC-10 Extender, and KC-135 Stratotanker operations.
![Page 113: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/113.jpg)
106b. AM-2 aluminum matting [ref. g, p. 5.8.1]
[ref. i. p 2-18] AM-2 mat is suitable as a runway surface
only for fighter aircraft and C-130 operations, and then only if accomplished as a flush repair and installed and
certified in accordance with Naval Air Systems Command Instruction
![Page 114: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/114.jpg)
106c. Crushed stone repair [ref. a, Annex E, ch.
3] Crushed stone repairs without FOD covers
are approved for C-17, C-5, C-141, KC-10, and KC-135 operations.
![Page 115: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/115.jpg)
106d. Cretemobile [ref. h, pp. 14-3, 14-4] Utilized as a mobile concrete mixing plant
![Page 116: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/116.jpg)
106e. Pavement [ref. j, p 2-1-25] This type of repair may be used in lieu of or
as a replacement for both the crushed stone and sand-grid repairs when additional resources are available. Uniform compaction of backfill material is critical.
![Page 117: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/117.jpg)
106.3 Explain the fundamentals of a typical
battalion tent camp layout.[ref. b, High-res camp layout and DWG
6028038]
![Page 118: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/118.jpg)
106 Tactical Sufficient space for command dispersion Concealment from ground and air observation Protection from bombing and strafing attacks Protection from mechanized attack
Sanitary Water supply Drainage Shade Access Site not occupied by other units in last two months
![Page 119: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/119.jpg)
106.4 Explain the purpose of maintaining
operator logs for generators and boilers [ref. c]
[ref. d] Daily operating logs are kept on
some Equipment. The main purpose for using operating logs is to continuously record data on equipment performance.
![Page 120: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/120.jpg)
106 106.5 Discuss the following transportable bridges: a. Bailey [ref. e, p. 1-5] Through-type metal truss bridge with heavy timber decking,
roadway carried between two main girders. Highly mobile and versatile bridge, can span a variety of gaps Transported in 5-ton dump & 40 ton trailer Quickly assembled by manpower, 30-40 personnel 12’-6” wide, can span up to 210’ Configurations: –Single / Single bridge, 100’ –Double / Single bridge 140’ –Double / Double bridge 180’ Launched and de-launched via roller system Additional bays are added to counter balance during launching
and de-launching
![Page 121: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/121.jpg)
106Components:Truss panel - form girder, 5’ x 10’ panelTransom - main support, 10” x 20’ flange beam Stringer - 10’ steel beamsChess - 2” x 8” x 14’ wood deckingRollers - launching & de-launchingBearing & base platesRampsVarious pins, clamps, braces, tie plates, bolts,
jacks, and carrying bars and tongs
![Page 122: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/122.jpg)
106. Medium girder [ref. f, pp. 1-8 thru 1-13]MGB is a two girder deck bridgeLaunched and de-launched via roller system
and 5 ton dump.Three types of MGB’sSingle story MGBDouble story MGBLinked reinforced MGB
![Page 123: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/123.jpg)
106Transported to site via 5 ton dump & 40 ton trailer Crew size 24 to 32 personnel•Bridge is formed with 2 main girders from a number of panels pinned together.Roadway is formed by hanging deck units between
girders and connecting ramps at each end13’-2” wide bridgeUsed for light vehicle loads
![Page 124: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/124.jpg)
106 c. Mabey Johnson [ref. k] The bridge is widely used throughout Iraq by US Army Engineers and US
Marine Seabee Engineers in fixed and floating configurations. Capable of taking continuous traffic Extra wide single lane width 4.2m Clear spans up to 61m Multi-span bridges can be built over fixed and floating supports Built on a green field sites by sitting on grillages and using ramps Transported into theatre in conventional 6m and 12m ISO containers and o
n 6m DROPS/PLS flatracks>>
Can be built using in-service construction equipment e.g. field cranes and tracked/wheeled excavators
Easily returned to stock after use Rugged with long fatigue life The modular design of the equipment means it can be constructed in a
large number of different configurations, to match various sized gaps throughout the support area.
![Page 125: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/125.jpg)
107 cese fundamentals107 CIVIL ENGINEER SUPPORT EQUIPMENT
(CESE) FUNDAMENTALSReferences:[a] NAVFAC P-300, Management of Civil Engineering
Support Equipment[b] COMFIRSTNCDINST 11200.2, Equipment
Management (RedBook)[c] NAVFAC P-307, Management of Weight Handling
Equipment[d] NAVSEA 4790.8B Maintenance and Material
Management (3M)107.1 State the purpose of the Battalion Equipment
Evaluation Program (BEEP).[ref b. ch 4 pg 1]
![Page 126: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/126.jpg)
107
![Page 127: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/127.jpg)
107.2 Discuss the purpose of the following
publications and instructions: a. P-300 [ref. a, p. iii] The purpose of this publication is to assist
management at all levels in properly discharging their responsibilities in the efficient management of the transportation program
![Page 128: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/128.jpg)
107b. COMFIRSTNCDINST 11200.2 [ref. b,
Signature Page] The purpose of this publication is to establish
policy, assign actions and give guidance for the Naval Construction Force Equipment Management program.
![Page 129: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/129.jpg)
107c. P-307 [ref. c, p. 2] To maintain the level of safety and reliability built into
each unit of applicable equipment by the original equipment manufacturer
To ensure optimum service lifeTo provide uniform standards for licensing of WHE
operators; To ensure the safe lifting and controlling capability of
WHE and promote safe operating practices through the inspection, test, certification, qualification, and operation requirements prescribed herein.
![Page 130: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/130.jpg)
107d NAVSEA 4790.8B Maintenance and
Material Management (3M) Standard for scheduled maintenance and
parts ordering.Used for ships maintenance and material
maintenance.
![Page 131: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/131.jpg)
1073 Describe the term deadline and its effects on
availability. [ref b. ch 3 pg 10] Deadline means a vehicle is out of service and
cannot be utilized.Applies to all equipment that cannot be
returned to service to perform all intended functions; has been determined by the maintenance supervisor, or higher authority,that repair parts are required, and that the parts are not obtainable within 3 working days.
![Page 132: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/132.jpg)
107.4 Describe the purpose of equipment lay up
(3M). [ref. d. ch1 p. 73]Lay-up maintenance actions prepare the
equipment for periods of prolonged idleness, and are usually performed only once at the beginning of the inactive period
![Page 133: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/133.jpg)
107a. IEM IEM maintenance requirement cards are
assigned SYSCOM MRC control numbers in the same manner as PMS MRCs. The SYSCOM MRC control number, periodicity indicator, skill level, and manhours information, normally located adjacent to a maintenance requirement on the MIP, will not be repeated when an operational MRC is used for IEM.
![Page 134: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/134.jpg)
107b. Status I and Status II Status I. Equipment that will remain on board andwill be inactive for thirty days or longer and is not
scheduledfor corrective maintenance or overhaul. Status II. Equipment that is inactive for thirty
daysor longer and is directly subject to corrective
maintenance, overhaul, or removal for safe storage/replacement
![Page 135: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/135.jpg)
107.5 Describe the responsibilities of the following:
[ref. b]a. Equipment yard supervisor [ch. 2, pp. 35, 36]The Equipment Yard Supervisor, the "Yard
Boss", manages the equipment yard and the CESE parked in it; establishes and enforces traffic control through the yard, such as stop signs, speed limits, and one-way traffic flow; maintains and establishes parking areas and ensures that all operator maintenance procedures are performed correctly to reduce equipment breakdowns.
![Page 136: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/136.jpg)
107b. Collateral equipment custodian [ch. 2, p.
53] To control collateral equipment, the
custodian shall do the following:a. Inventory. Maintain an accurate up-to-date
location listof the unit's Collateral equipment using the
CB 60 Form.
![Page 137: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/137.jpg)
107 (1) The CB 60 Form is the main inventory card and
shallbe kept up-to-date at each issue, return to stock, and
uponreceipt of new equipment.(2) Complete a CB 60 Form for each line item ofequipment, annotating NSN and description. The card
file is by EC-USN sequence.(3) Initiate NAVSUP Form 1250-1/-2 per instructionsparagraph 3303 subparagraph d for all losses or
damage that require reordering, and enter requisition number on a CB 60 Form.
![Page 138: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/138.jpg)
107c. Dispatcher [ch. 2, pp. 34, 35]The Dispatcher's primary duty is to manage
the unit's equipment resources efficiently within the general policies and directives of the U.S. Navy and according to local policies, as directed by the unit Equipment Officer.
![Page 139: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/139.jpg)
107d. Maintenance Supervisor [ ref. b. ch1 p.4
and ch3 pg 1] The ALFA Company Maintenance Supervisor
is normally a Construction Mechanic Senior Chief (CMCS). The A4 is tasked with ensuring proper maintenance and repair of all automotive, construction and material handling equipment assigned to the NMCB/Unit.
![Page 140: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/140.jpg)
107e. Det Repair parts Petty Officer [ ref b. ch 3
pg 3 ] Maintains inventory and issues repair parts.
![Page 141: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/141.jpg)
107107.6 State the purposes of a Monthly
CESE/MHE report. [ref. b. ch1 pg 20]The report is sent by the close ofbusiness on the FIFTH DAY of the
FOLLOWING month, via message.CESE/MHE, which cannot be used to meet
operational orcontingency commitments due to the
following reasons, should bereported:
![Page 142: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/142.jpg)
1071) Deadline Applies to all equipment that cannot bereturned to service to perform all intended functions; has beendetermined by the maintenance supervisor, or higher
authority,that repair parts are required, and that the parts are notobtainable within 3 working days.(2) Non-availability All equipment deadlined, awaitingshop entry, disposition, or any reason that does not allowequipment to be dispatched prior to close of business.
Nonavailability is figured on a 24-hour, 7-day week basis.c. CESE/MHE which has been placed in active/inactive
storagewill be reported separately in item 7.
![Page 143: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/143.jpg)
107.7 Name 3 pieces of CESE specific to a
NMCB [ref. ABFC View]TRK AMBULANCE HMMWVTRK MAINTENANCE HMMWV
TRUCK DUMPTRK TANK FUEL SERV MTVRTRLR TANK 400 GAL WATER MIXER CONCRETE 11 CU FT
![Page 144: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/144.jpg)
108 construction ops108 CONSTRUCTION OPERATIONS
FUNDAMENTALSReferences:[a] Crew Leader Handbook[b] NAVFAC P-405, Planners and Estimators
Handbook[c] NAVFAC P-445, Construction Quality
Management Program
![Page 145: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/145.jpg)
108
![Page 146: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/146.jpg)
108108.1 Explain the use of the following:a. Seabee Construction Management (CBCM)
program [ref. a, pp. 3-5] Construction management in the Seabees is
based on the CPM. A major advantage to using the CPM method is training. CPM gives the new project supervisor exposure to the fundamentals of project management.
![Page 147: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/147.jpg)
108b. Crew Leader Handbook [ref a] Utilized for project planning, manpower
projections.
![Page 148: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/148.jpg)
108c. NAVFAC P-405 [ref. b]The Seabee Planner's and Estimator's
Handbook is a technical GUIDE for planningand estimating construction projects
undertaken by the Naval Construction Force (NCF).
The handbook provides information on estimating construction work elements and material
quantities, including equipment and manpower requirements.
![Page 149: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/149.jpg)
108.2 Discuss project scope. [ref. a, pp. 4-2, 15-
17, 15-18] An overall view of what the project consists
of accomplishing.
![Page 150: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/150.jpg)
108.3 Discuss the following: [ref b] a. Direct labor [pp. 1-2] Direct labor includes all labor expended
directly on assigned construction tasks, either in the field or in the shop, which contributes directly to the completion of the end product.
Direct labor must be reported separately for each assigned construction task.
![Page 151: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/151.jpg)
108b. Indirect Labor [pp. 1-2]Indirect labor is labor required to support
construction operations, but does not produce an end product itself.
![Page 152: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/152.jpg)
108c. Overhead Labor [pp. 1-2]. Overhead labor is not considered to be
productive labor because it does not contribute directly or indirectly to the end product. It includes all labor that must be performed, regardless of the assigned mission.
![Page 153: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/153.jpg)
108
.4 Discuss the following: [ref.a] a. Delay Factor (DF)[pp. 2-8] Weather, manpower experience, equipment
failure, supply shortages. Anything that can affect the time frame of the project
![Page 154: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/154.jpg)
108b. Production Efficiency Factor (PEF) [pp. 2-8] Direct Labor Efficiency factor is used to determine how
much construction type production a battalion main body or detachment is achieving. It is easily determined from the Situation Report (SITREP). The overall battalion goal is 30 percent while main body averages are 20 percent.
The formula is the fraction (written as percent) of actual direct labor divided by the total strength of the battalion. It is used where actual direct labor is the total labor charged to the project tasking, and
is accounted for by the timekeepers at each job site. The total strength includes every enlisted person in the battalion, both Occupational Field 13 (OF-13) and non OF-13.
![Page 155: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/155.jpg)
108 c. Manday Capability Equation (MC) [pp. 2-10] Manpower estimates consist of a list of the number of direct labor man-
days required to complete the various activities of a specific projectA man-day
is a unit of work performed by one man in 8 hours. Man-Day Capability: MC =DL x AF x WD x ME MC = Man-Day Capability, Man-Day Availability or Tasked Man- Days DL = Planned Direct Labor AF = Availability Factor WD = Available Workdays, Total Deployment Days less Sundays, holidays, turnover, training and off Saturdays. (Obtained from the deployment calender.) ME = Man-Day Equivalent, Planned work hours per day divided by 8 hours (one man-day). Example: a 9-hour workday can be Shown as 9/8 or 1.125 .
![Page 156: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/156.jpg)
108.5 Discuss the following scheduling reports [ref. a] a. Level I [pp. 1-1]A Level I schedule lists all of the projects assigned
and contains a broad schedule for each project. The schedule also includes a planned rate of accomplishment for the entire deployment
. After the operations officer has balanced the estimated workload against the battalion’s manpower skills and equipment the Level I is submitted through the chain of command up to the Commanding Officer.
The level I is updated by the Operations Officer .
![Page 157: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/157.jpg)
108b. Level II [pp. 1-1, 3-1]Used by company CDRs, OpsProject specificBy master activityBi-weekly bar chartQuick view of project progressPlanned progress verses actual progress curveSitrep input to S3 biweeklySitrep input to brigade monthly
![Page 158: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/158.jpg)
108c. Level III [pp.1-1, 1-2, 3-5, 3-6] The following information is found on a Level
III barchart.Construction ActivitiesStart, finish and duration of each
construction activityCritical activitiesFree Float
![Page 159: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/159.jpg)
108
108.6 Discuss the Construction Project SITREP [ref a., pp. G-6]
A message SITREP must be submitted monthly by the battalion within 3 workdays after the last day of each month. The report includes all tasked projects listed in increasing numerical sequence.
![Page 160: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/160.jpg)
108All SITREPs include a project status summary
by location. This summary provides project WIP,
remaining project man-days, and completion date percentage data. The status summary also contains a brief description of the work accomplished during the reporting period for each project
![Page 161: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/161.jpg)
108.7 Discuss the importance of generating and
maintaining complete and accurate Construction Activity Summary Sheets (CASS). [ref. a, p. 2-12]
A typical Naval Mobile Construction Battalion (NMCB) project might contain between 15 and 50 construction activities. Construction activity numbers are usually four digits. The first two digits identify the master activity and the second two digits show a specific construction activity within a master activity
![Page 162: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/162.jpg)
108Once the master activities have been broken
into construction activities, you will need to use a CAS sheet (figs. 2-9 and 2-10) for each activity. In addition to the activity description and scheduled dates, all the required resources are shown on the front. Safety andQC requirements are on the back. The space at the bottom of the back page should be used for man-dayand duration calculations
![Page 163: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/163.jpg)
108.9 Discuss Request for Information (RFI).
[ref. a, pp. 12-4, 15-9, 15-72] A request for a clarification of the project
scope or if unforeseen circumstances are encountered.
![Page 164: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/164.jpg)
108.10 Discuss a project scope change. [ref. a,
pp. 12-3, 12-4]A change in the project due to unforeseen
circumstances. May be an increase or decrease of scope.
![Page 165: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/165.jpg)
108.11 Describe the purpose of the Naval
Construction Force (NCF) Quality Control Program (QCP). [ref. c, p. 1-1]
The purpose of the Quality Control Plan:Provide customer satisfaction with a product that
fulfills the requirement for which it was intendedProvide quality construction requiring no reworkProvide craftsperson accountability for quality
construction, and economical use of material within the Naval Construction Force.
![Page 166: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/166.jpg)
108.12 State the purposes of the project safety
plans contained in the project package.[ref. c, p. 2-40] The safety plan lists the hazards and
corrective action to be taken from the back of the CAS sheets.
The crew leader must ensure that the crew is properly trained and aware of all safety conditions present.
![Page 167: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/167.jpg)
108.13 Describe the 3-phases of control for the
Construction Quality Management Program(CQMP) [ref. c, pp. 2-10 thru 2-13] The main purpose of the quality control program (see
2ndNCB/3rdNCBINST 4355.1C) is to prevent discrepancies where the quality of the workmanship and the materials fail to match the requirements in the plans and specifications. The responsibility for quality construction rests with the crew leader and the chain of command. The quality control division of the operations department as described in chapter 2 is responsible for conducting tests and inspections to ensure compliance with the plans and specifications. The crew leader must plan quality into the project. Quality planning avoids discrepancies found by the quality control (QC ) inspectors while performing their inspections
![Page 168: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/168.jpg)
201 warfare mission201 WARFARE MISSION AREAReferences:[a] OPNAVINST 3501.115D, Projected Operational
Environment (POE) and RequireOperational Capabilities (ROC) for the Naval
Construction Force Series[b] NTTP 4-04.1, Seabee Operations in the MAGTF[c] NAVFAC P-1049, Naval Construction Force
Mobilization Manual[d] OPNAVINST 5450.46K, Naval Construction Force
Policy Statement[e] NWP 4-04 Naval Civil Engineer Operations
![Page 169: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/169.jpg)
201201.1.1 State and discuss the NMCB mission.
[ref. b, p. 2-6]
![Page 170: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/170.jpg)
201
![Page 171: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/171.jpg)
201The mission of the NMCB is to provide
responsive military construction support to Navy, Marine Corps, and other forces in military operations; to construct and maintain base facilities; to repair battle-damaged
facilities, and to conduct limited defensive operations as required by the circumstances of the deployment situation. It can also accomplish disaster control and recovery efforts when required.
![Page 172: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/172.jpg)
201.2 Define the term MOB. [ref. c, pp. 7-1, 7-2]A quality or capability of military forces that
permits them to move from place to place while retaining the ability to fulfill their primary mission
![Page 173: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/173.jpg)
201
![Page 174: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/174.jpg)
201.3 Discuss the role of the NMCB in a MOB
mission. [ref. a, encl. 7] The NMCB can function as an integralunit of the NCR, or operate independently. The
NMCB can provide specialized, task-organized detachments up to one-half its organizational size to address specific support requirements. Nearly 85 percent of each NMCB can deploy as an air echelon via strategic airlift (approximately 60 C-141, 44 C-17)
![Page 175: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/175.jpg)
201.4 Discuss the role of an NMCB in support of
amphibious operations. [ref. e, p 2-6] Not all component Seabee organizations may
be employed during amphibious operations. Normally employed under OPCON of the CATF, PHIBCBs and UCTs conduct construction
missions that assist with the ship-to-shore movement of personnel, equipment, and supplies.
![Page 176: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/176.jpg)
201The NMCB can rapidly upgrade beach egress
and road networks to staging and marshaling areas and other inland destinations, and construct expedient survivability structures(e.g., earthen berms) for Class III bulk liquids (AAFS) and Class V (A/W) storage.
![Page 177: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/177.jpg)
201.5 Discuss battalion command and control
within the Marine Air/Ground Task Force(MAGTF). [ref. b, p 2-7] Seabee units employed under OPCON of the
MPF MAGTF commander (e.g., an NMCB) will be tasked in accordance with MAGTF construction priorities. However, those Seabee units employed in direct support of the NSE or other Navy component commande r(e.g., a PHIBCB) during MPF operations are not subject to MAGTF priorities.
![Page 178: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/178.jpg)
201.6 Discuss battalion command and control during joint
operations in peacetime and wartime [ref. d, pp. 6-8] A verbal or graphic statement, in broad outline, of a
commander’s assumptions or intent in regard to an operation or series of operations. The concept of operations frequently is embodied in campaign plans and operation plans; in the latter case, particularly when the plans cover a series of connected operations to be carried out simultaneously or in succession. The concept is designed to give an overall picture f the operation. It is included primarily for additional clarity of purpose.
![Page 179: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/179.jpg)
201.7 Describe tactical construction. [ref. a, encl.
7] Manpower for security should be figured into
the project if necessary. Consideration should be given to direct labor wearing armor and Kevlar in man days efficiency factor
![Page 180: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/180.jpg)
201201.1.8 Describe the Seabees role in advanced
base and camp construction. [ref. c, p. 12-2]NMCB’s construct base facilities in support of
the Navy, Marine Corps, and other armed services engaged in military operations.
NMCBs are rapidly deployable, self-sustaining units with the exception of Class IV construction materials that are provided by supported commander, and are capable of performing vertical, horizontal and specialized construction.
![Page 181: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/181.jpg)
201.9 Discuss battalion operations during a
peacetime deployment. [ref. c, p. 12-3] When forward deployed during peacetime,
the active NMCBs perform project construction (primarily for skills training and readiness) in support of Fleet CINCs under the coordination and project management of the NCBs.
![Page 182: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/182.jpg)
201
![Page 183: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/183.jpg)
20111 Discuss battalion administrative and
operational control in homeport. [ref. d, pp. 7, 8]NCRs are under the OPCON/ADCON of their
NCBs and exercise OPCON/ADCON over subordinate NCF units. In support of forward deployed units in the European theater, CINCUSNAVEUR exercises OPCON over the deployed NMCB in Europe via SECOND NCB and TWENTY-SECOND NCR, both of which remain in CONUS for peacetime operations and coordination of NCF units in that theater
![Page 184: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/184.jpg)
20112 Discuss NMCB administrative control when
forward deployed. [ref. d, p. 8] Forward deployment requirements for NMCBs are
specified in reference (i). Rotation of NMCBs shall be planned by both NCBs and the Fleet CINCs, and approved by the CNO (N44). When not deployed , NMCBs are under the ADCON/OPCON of the NCBs reporting via their NCRs. When forward deployed, NMCBs shall be under the OPCON of the AOR theater CINC via the Navy service component commander serving that CINC and OPCON NCR Forward deployed NMCBs remain under the ADCON of the NCBs reporting via the NCRs. NMCBs may be assigned OPCON to a Marine Expeditionary Force (MEF) or a Marine Air Ground Task Force (MAGTF)
![Page 185: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/185.jpg)
201.13 Discuss NMCB operational control within
the MAGTF and a Naval ConstructionRegiment (NCR) [ref b, p. 2-7] [ref. e, p 2-7] Transferable command authority that may be
exercised by commanders at any echelon at or below the level of combatant command. Operational control is inherent in combatant Command (command authority).
![Page 186: SCW UNIT SPECIFIC](https://reader038.vdocument.in/reader038/viewer/2022102419/56812e46550346895d93d893/html5/thumbnails/186.jpg)
201Operational control includes authoritative
direction over all aspects of military operations and joint training necessary to accomplish missions assigned to the command. Operational control should be exercised through the commanders of subordinate organizations.