section 1 profiles & end caps - faberinc.com · 1.5" series basic profiles specialty...
TRANSCRIPT
Catalog 1825/US IPS Structural System SolutionsProfiles
13 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
1.5" x 1.5" Standard 181.5" x 1.5" Heavy 18
1.5" x 1.5" Closed Face 19
1.5" x 1.5" Quarter Round 201.5" x 1.5" x 45° 20
1.5" x 0.75" 20
1.5" x 3" Standard 211.5" x 3" Heavy 21
1.5" x 3" Closed Face 22
3" x 3" Standard 233" x 3" Heavy 23
1.5" x 6" 24
1" x 1" 16
1" x 2" 161" x 3" 17
2" x 2" 17
Contents
Section 1Profiles & End Caps
1" Series Basic Profiles
1.5" Series Basic Profiles
Specialty Profiles
32x18 Door Profile 25
Rack Angle Profile 26Blank Rack Angle Profile 26Clip Nuts 26
Clamp Bar Profile 27
Panel & Mesh Gaskets 28
Profile Covers Safety Cover 28 Anti-Skid Cover 28
T-Slot Covers/Panel Holders 29
Pro
files
& E
nd
Cap
s
Profile End Caps
End Caps 30
Catalog 1825/US IPS Structural System SolutionsProfiles
14 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Basic Profiles
Overview
12-1010 12-1020 12-1030 12-2020
10-1515 11-1515 10-1593 10-1594
10-154510-1592 10-1591 10-1543 10-1575
10-1530 11-1530 10-3093
10-3094 10-3092
10-3030 11-303010-1560
Catalog 1825/US IPS Structural System SolutionsProfiles
15 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
Specialty Profiles
Overview
12-10512-032
12-114 12-101
12-109
12-106
Also Available in Panel Section
12-018 12-011 12-009 Sliding Door Guides Roller Door Guides
Also Available in Slide Blocks Section
Slide Bar Profiles Slide Strips
Catalog 1825/US IPS Structural System SolutionsProfiles
16 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
1" Series
Ø 0.202
0.255"
0.593"
0.095"
0.319"
1.00"
1.00"
1.00"
2.00"1.00"
Servicing ForUniversal
Servicing ForStandard Fastener
(End)
Servicing ForStandard Fastener
(Side)
Ø 0.563" X
0.430" DEEP
0.5" FROM END
TAP 1/4-20 X
Ø 0.219"DRILL THRU0.5" FROM END
Fastener
0.625" DEEP
ApplicationiSeries profiles are designed for safety guards, enclosures, shelves, and other lightto medium duty applications. T-Slots on four sides allows for effortless mounting ofaccessories directly onto the structure without additional machining.
The T-slot is smaller than the 1.5" Series requiring different hardware. With profile12-1020, higher rigidity can be attained by orienting the extrusion on its ‘y’ axis.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishSpecification)
1" T-SLOT DETAIL
12-1010
12-1020
Ordering InformationDescription Unit Part #1" X 1" Profile Cut off max. 240 in 12-1010
1" X 2" Profile Cut off max. 240 in 12-1020
* Saw Cut Needed for Cut to length 19-001
Quick Reference for Mating ComponentsFasteners Structural Accessories
1" Standard Fastener 25-022 Levelers pg 871" Universal Fastener 25-023 Casters pg 94
End Caps Plates pg 491" X 1" (for 12-1010) 18-1010 Gussets pg 471" X 2" (for 12-1020) 18-1020
lx Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
12-1010 0.046 0.046 0.439 0.516
12-1020 0.085 0.310 0.785 0.923
Basic Profiles
Catalog 1825/US IPS Structural System SolutionsProfiles
17 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
ApplicationThese iSeries profiles are ideal for support and post applications. With their higherrigidity, structures can be built with higher stability.
Profile 12-1030 is designed with a high inertial strength in the ‘y’ axis. This allowshigher structural integrity with a smaller profile to create more stable and rigidstructures. T-Slots on four sides allows for effortless mounting of accessories directlyonto the structure without additional machining.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishspecification)
Ordering InformationDescription Unit Part #1" X 3" Profile Cut off max. 240 in 12-1030
2" X 2" Profile Cut off max. 240 in 12-2020
* Saw Cut Needed for Cut to length 19-001
Quick Reference for Mating ComponentsFasteners Structural Accessories
1" Standard Fastener 25-022 Floor Brackets pg 921" Universal Fastener 25-023 Casters pg 94
End Caps Plates pg 491" X 3" (for 12-1030) 18-1030 Gussets pg 472" X 2" (for 12-2020) 18-2020
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
12-1030 0.124 0.967 1.131 1.330
12-2020 0.555 0.555 1.218 1.432
1.00"
3.00"
1.00"
1.00"
1" Series
2.00" 1.00"
2.00"
1.00"
12-1030
12-2020
Basic Profiles
Catalog 1825/US IPS Structural System SolutionsProfiles
18 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Application10-1515 and 11-1515 are ideal general purpose extrusions for guards, enclosures,work stations, tool carts and smaller machine frames. T-slots on four sides allows foreffortless mounting of accessories directly onto the structure without additionalmachining.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishspecification)
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-1515 0.207 0.207 0.969 1.140
11-1515 0.271 0.271 1.201 1.412
Basic Profiles
Servicing forUniversaUniversal Fastener
Servicing ForStandard Fastener
(End)
Servicing ForStandard Fastener
(Side)
Ø 0.281DRILL THRU0.75" FROM END
TAP 5/16-18 X
Ø 0.813" X0.625" DEEP0.813" FROM END
0.75" DEEP
1.5" Series
1.50"
1.50"
1.14"
1.14"
1.50"
1.50"
11-1515
10-1515
Ø .2656"
Ø .201"
.482"
.787"
.177".320"
.320"
.787"
.177"
.482"
Ø .2656"
1.5" STANDARDT-SLOT DETAIL
1.5" HEAVYT-SLOT DETAIL
Ordering InformationDescription Unit Part #1.5" x 1.5" Standard Profile Cut off max. 240 in 10-1515
1.5" x 1.5" Heavy Profile Cut off max. 240 in 11-1515
* Saw cut needed for Cut to Length 19-001
Quick Reference for Mating ComponentsFasteners T-Nuts
1.5" Standard Fastener 25-003 1/4-20 Roll-In 25-0011.5" Single Fastener 25-014 5/16-18 Roll-In 25-0021.5" Universal Fastener 25-004 5/16-18 Double Roll-In 25-041
End Caps 1/4-20 Economy 20-0831.5" x 1.5" 18-1515 5/16-18 Economy 20-082
Catalog 1825/US IPS Structural System SolutionsProfiles
19 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
ApplicationThese profiles are designed with various closed faces. They are particularlyuseful when a smooth appearance is desired. The smooth surfaces are ideal forclean room, packaging, medical and pharmaceutical applications. The option ofdifferent T-slotted faces is ideal for fastening the profiles while retaining a smoothexterior to create the most aesthetic appearance.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishspecification)
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-1591 0.205 0.205 0.961 1.130
10-1592 0.207 0.207 0.963 1.132
10-1593 0.205 0.205 0.966 1.136
10-1594 0.208 0.208 0.963 1.132
Basic Profiles
1.5" Series
You must use 25-022 (Flat Standard Fastener),25-014 (Single Ended Standard Fastener) or25-004 (Universal Fastener) when attaching tothe end of the closed slot profiles (as shownabove).
1.50"
1.50"
1.14"
1.14"
0.078"
1.50"
1.50"
0.078"
1.14"
1.14"
1.50"
1.50" 1.14"
0.078"
1.14"
1.50"
1.50"
1.14"
0.078"
1.14"
10-1594
10-1593
10-1592
10-1591
Ordering InformationDescription Unit Part #
1.5" x 1.5" Mono Slot Profile Cut off max. 240 in 10-1591
1.5" x 1.5" Bi-Slot Corner Profile Cut off max. 240 in 10-1592
1.5" x 1.5" Tri-Slot Profile Cut off max. 240 in 10-1593
1.5" x 1.5" Bi-Slot Midframe Profile Cut off max. 240 in 10-1594
* Saw cut needed for Cut to Length 19-001
Quick Reference for Mating ComponentsFasteners Structural Accessories
1.5" Flat Standard Fastener 25-022 Panels pg 741.5" Single Fastener 25-014 Hinges pg 651.5" Universal Fastener 25-004 Catches pg 59
End Caps Gussets pg 471.5" x 1.5" 18-1515
Catalog 1825/US IPS Structural System SolutionsProfiles
20 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
1.5" Series
1.5" Quarter Round[10-1543]
5/16-18 X 3/4 BHCS[25-112-5]
1.5" Radius[22-154]
1.5" Corner Connector[22-153]
1.5" Bi-Slot Corner[10-1592]
1.5" x 1.5" x 45°[10-1545]
1.5" X 45° End Cap[18-1545]
Use 1.5" Universal Fasteners [25-004] on the insideof this joint to create a smooth exterior.
Minimum Tap Depth 0.75"
.75"
1.00"
.25"
.59"
1.17"1.50"
Ø .201"
10-1575
1.50"
1.50"
R1.5"
10-1543
1.50"
1.50"
.31"
1.50"
10-1545
ApplicationThese profiles are designed with curved, angular and smooth surfaces whileretaining T-slotted surfaces for connecting. They are particularly useful for roundingor smoothing off corners of structures where ergonomics apply. The smoothsurfaces are ideal for clean room, medical and pharmaceutical applications.
Profile 10-1545 can also be used for gusset applications or where 45° angles arerequired. Profile 10-1575 is also ideal for creating handles and for mountingaccessories.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishSpecification)
Ordering InformationDescription Unit Part #1.5" X 0.75" Profile Cut off max. 240 in 10-1575
1.5" Quarter Round Profile Cut off max. 240 in 10-1543
1.5" X 1.5" x 45° Profile Cut off max. 240 in 10-1545
* Saw Cut Needed for Cut to length 19-001
Quick Reference for Mating ComponentsFasteners End Caps
1.5" Standard Fastener 25-003 1.5" x 0.75" (for 10-1575) 18-15751.5" Single End Standard 25-014 1.5" Quarter (for 10-1543) 18-15431.5" Universal Fastener 25-004 1.5" x 45° (for 10-1545) 18-1545
Corner Connector 1.5" Radius1.5" Corner Connector 22-153 (for Corner Connector) 22-154
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-1575 0.037 0.142 0.678 0.797
10-1543 0.122 0.122 0.839 0.987
10-1545 0.099 0.189 0.814 0.957
Basic Profiles
Catalog 1825/US IPS Structural System SolutionsProfiles
21 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
1.5" Series
1.50"
1.50"3.00"
10-1530
1.50"
3.00" 1.50"
11-1530
ApplicationProfiles 10-1530 and 11-1530 are ideal general purpose extrusions for guards,enclosures, work stations, tool carts and machine frames. They are designed with ahigh inertial strength in the 'y' axis. This allows higher structural integrity to createmore stable and rigid structures. T-slots on four sides allow for effortless mounting ofaccessories directly onto the structure without additional machining. These profilesare ideal for transporting compressed air.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishSpecification)
Ordering InformationDescription Unit Part #1.5" X 3" Standard Profile Cut off max. 240 in 10-1530
1.5" X 3" Heavy Profile Cut off max. 240 in 11-1530
* Saw Cut Needed for Cut to length 19-001
Quick Reference for Mating ComponentsFasteners T-Nuts
1.5" Standard Fastener 25-003 1/4-20 Roll-In 25-0011.5" Universal Fastener 25-004 5/16-18 Roll-In 25-002
End Caps 5/16-18 Double Roll-In 25-0411.5" X 3" 18-1530 1/4-20 Economy 20-083
5/16-18 Economy 20-082
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-1530 0.367 1.493 1.606 1.889
11-1530 0.505 1.889 2.128 2.503
Basic Profiles
Pneumatic fittingsshown threaded intopressure plates.
Catalog 1825/US IPS Structural System SolutionsProfiles
22 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Depending on the orientation of thestandard fastener you will need touse the appropriate standardfastener.
Any StandardFastener
Must Use FlatStandard Fastener[25-022]
3.00" 1.50"
1.50"
0.078"
1.50"
3.00" 1.50"
0.078"
1.50"
3.00" 1.50"
0.078"
10-3094
10-3093
10-3092 ApplicationThese profiles are designed with the high strength of 1.5" by 3" profiles with theaddition of closed surfaces to create a smooth aesthetic appearance. They are idealfor applications such as work stations, machine frames and rigid enclosures. Thesmooth surfaces make them ideal for clean room, packaging, medical andpharmaceutical applications. These profiles can also be used for transportingcompressed air.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishSpecification)
Ordering InformationDescription Unit Part #1.5" X 3" Tri-Slot Profile Cut off max. 240 in 10-3092
1.5" X 3" Quad Slot Profile Cut off max. 240 in 10-3093
1.5" X 3" Bi-Slot Midframe Profile Cut off max. 240 in 10-3094
* Saw Cut Needed for Cut to length 19-001
Quick Reference for Mating ComponentsFasteners T-Nuts
1.5" Standard Fastener 25-003 1/4-20 Roll-In 25-0011.5" Single End Fastener 25-014 5/16-18 Roll-In 25-0021.5" Universal Fastener 25-004 5/16-18 Double Roll-In 25-041
End Caps 1/4-20 Economy 20-0831.5" X 3" 18-1530 5/16-18 Economy 20-082
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-3092 0.361 1.456 1.563 1.838
10-3093 0.353 1.394 1.531 1.800
10-3094 0.375 1.478 1.594 1.875
Basic Profiles
1.5" Series
Catalog 1825/US IPS Structural System SolutionsProfiles
23 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
Inquire aboutCustom Tops
3.00"
3.00"
1.50"
1.50"
3.00"
3.00"
1.50"
1.50"
10-3030
11-3030
1.5" Series
ApplicationThese profiles are designed for medium to heavy duty structures and are ideal forstructural support and post applications. These profiles have high structural integrityto create extra stable and rigid structures. T-slots on four sides allow for effortlessmounting of accessories directly onto the structure without additional machining.These profiles are ideal for transporting compressed air.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishspecification)
Ordering InformationDescription Unit Part #3" X 3" Standard Profile Cut off max. 240 in 10-3030
3" X 3" Heavy Profile Cut off max. 240 in 11-3030
* Saw Cut Needed for Cut to length 19-002
Quick Reference for Mating ComponentsFasteners Structural Accessories
1.5" Standard Fastener 25-003 Levelers pg 871.5" Universal Fastener 25-004 Casters pg 96
End Caps Plates pg 493" X 3" 18-3030 Gussets pg 47
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-3030 2.732 2.732 2.697 3.172
11-3030 3.500 3.500 3.449 4.056
Basic Profiles
Catalog 1825/US IPS Structural System SolutionsProfiles
24 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Application10-1560 is designed for heavy duty structures and is an ideal profile for structuralsupport and post applications. 10-1560 is designed with a high inertial strength in the'y' axis. This allows for very high structural integrity to create extra stable and rigidstructures. T-slots on four sides allow for effortless mounting of accessories directlyonto the structure without additional machining. This profile is ideal for transportingcompressed air. Because of its multiple T-slots, it is also an ideal profile for a fixturetable.
Technical DataAluminum, Clear Anodized (See Technical Data page for full material and finishspecification.)
Ix Iy Section WeightPart # [in4] [in4] [in2] [lb/ft]
10-1560 0.685 10.206 2.880 3.387
Basic Profiles
1.5" Series
6.00"
1.50"
1.50"
1.50"
1.50"
Ordering InformationDescription Unit Part #1.5" X 6" Profile Cut off max. 240 in 10-1560
* Saw Cut Needed for Cut to length 19-003
Quick Reference for Mating ComponentsFasteners T-Nuts
1.5" Standard Fastener 25-003 1/4-20 Roll-In 25-0011.5" Universal Fastener 25-004 5/16-18 Roll-in 25-002
End Caps 5/16-18 Double Roll-In 25-0411.5" X 3" 18-1530 1/4-20 Economy 20-083(Use 2 per end) 5/16-18 Economy 20-082
10-1560
Catalog 1825/US IPS Structural System SolutionsProfiles
25 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
Specialty Profiles
Door Profile
Guide InsertSet (page 86)[21-073]
Roller InsertSet (page 86)[21-075]
32x18 End Cap[18-807]
1/4" PanelingUsing 12-106 Gasket
Panel Gasket 10[12-108] 1/4" Panel
32 x 18Door Profile[12-032](Small T-slotFacing out)
32x18 Fastener[25-132]
Tap #10-32as needed
32 x 18Door Profile[12-032](Large T-Slotfacing in)
Frame for holding panels with small T-slotfacing out. (No milling required)
1/4" Panel
32 x 18Door Profile[12-032](Small T-Slotfacing in)
32x18 Fastener[25-132]
Panel Gasket 8[12-106]
Frame for holding panels with large T-slotfacing out. (You must mill slot for fastener)
Mill Slot
Ø 0.281"
0.63"
0.437"
0.50"
Mill Detail
0.71"
1.26"
0.315"
0.48"
0.48"
0.394"Ø 0.165"
12-032
0.59" 0.55"0.38"
#10-32 x 3/4"
0.30"0.12"TYP
0.43"
25-132
1.26"
0.71"
18-807
0.39"
0.42"
0.24"
12-108
ApplicationLight duty smooth face extrusion that issuitable for guarding, sliding doors andenclosures.
This profile requires the special fasteners andend caps that are shown on this page.
Standard 1.5" T-nuts work in the small T-slot.
Technical DataAluminum, Clear AnodizedWeight 0.45 lb/ft
Fastening Set: St., GalvanizedWeight 0.02 lb
End Cap: Glass Filled Nylon, BlackWeight 0.007 lb
Gasket: Molded vinyl, grey
Ordering InformationDescription Unit Part #32 x 18 Door Profile Cut off max. 236 in 12-032
* Saw Cut Needed for Cut to length 19-001
Fastening Set 32 x 18 Each 25-132
32 x 18 End Cap Each 18-807
Panel Gasket 10 Each 12-108
Catalog 1825/US IPS Structural System SolutionsProfiles
26 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Specialty Profiles
Rack Angle
TYPICAL PANEL7.0"
19.0"
1.5"
19.17"
18.34"
1.03"2.54"
1.87"0.36"
0.10"
0.23"
0.71"
1.08"
0.54"
0.19"
0.47" 1.97" TYP
118" MAX
0.125" 0.625"
0.625" 0.375"
0.375"
1/4-20
1.75"(1U)
118" MAX
0.47" 1.97" TYP 1/4-20
#10-321/4-2025-075
25-076
12-110
12-109
ApplicationUsed for attaching standard 19" rackmount equipment/panels to 1.5" Profiles.Clip nuts snap into square holes in12-109 rack angle. Blank rack angle12-110 can be machined to mount anyaccessories.
Blank rack angle can also be used tosupport horizontal panels, especially asdrop in panels (like ceiling panels).
Technical DataRack AngleAluminum, Clear AnodizedComplete with 1/4-20 flat point setscrew.
Weight:12-109 0.679 lb/ft12-110 0.683 lb/ft
Ordering InformationDescription Unit Part #19" Rack Angle Cut off max. 118" 12-109
Rack Angle, Blank Cut off max. 118" 12-110
* Saw Cut necessary for cut to length 19-001
1.5
ApplicationSquare nut with clip attachment for 19"Rack Angle. Nut snaps into square holesfor attaching panels and accessories.
Technical DataSt., Zinc Plated
Weight 5g
Ordering InformationDescription Unit Weight Part #Clip Nut #10-32 Each 0.01 lb 25-075
Clip Nut 1/4-20 Each 0.01 lb 25-076
1.5Clip Nuts
Catalog 1825/US IPS Structural System SolutionsProfiles
27 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
Specialty Profiles
Clamp Bar Profile
0.79"
0.59"0.79"
0.20"
1.18"
5/16-18BHCS
Cut to Lengthand Serviceas required.
ApplicationFor attachment of 1.5" Series profiles tobase plates and other parts. Must beused in pairs to accomplish properclamping of the profile.
Ordering InformationDescription Unit Part #Clamp Bar Profile Cut off max. 78" (6.5') 12-105
* Saw cut necessary for cut to length 19-001
12-105
1.5 Technical DataAluminium, Clear AnodizedWeight: 0.83 lb/ft
Catalog 1825/US IPS Structural System SolutionsProfiles
28 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Specialty Profiles
Panel & MeshGaskets
12-106 12-107
0.315"
Add 0.315" Per side ofpanel for T-Slot insertedpanel using the 12-106.
Add 0.400" Per side ofpanel for T-Slot insertedmesh using the 12-107.
0.400"
0.26"
0.51"
0.43"
0.26"
0.08"
12-106
12-107
Safety Cover
1.33"
Anti-Skid Cover
1.26"
0.18"
0.31"0.47"
0.16"
12-113
12-114
ApplicationPanel gasket is used to hold 1/4" panelsin 1.5" profiles. The mesh gasket holdsup to 12 Gage wire mesh in 1.5" profiles.Both gaskets provide a tight fit andprevent any rattling.
Technical DataMolded Vinyl, Grey
Ordering InformationDescription Unit Weight Part #
Panel Gasket Cut off max. 100' 0.29 lb/ft 12-106100' Roll 12-106R
Mesh Gasket Cut off max. 100' 0.29 lb/ft 12-107100' Roll 12-107R
1.5
ApplicationThese bright covers snap into 1.5"profile and provide high visibility inguarding applications. This cover alsoprevents dirt and debris from collectingin the T-slot.
Technical DataRigid PVC, Yellow
Ordering InformationDescription Unit Weight Part #
Safety Cover Strip Cut off max. 9.8' 0.067 lb/ft 12-113
1.5
ApplicationCover for 1.5" profiles is used for non-slip surfaces such as ladders and stopsfor sliding doors. Oil and water resistant.
Technical DataRubber, Black
Hardness 80 Shore
Ordering InformationDescription Unit Weight Part #Anti-Skid Cover Cut off max. 65' 0.11 lb/ft 12-114
1.5
Catalog 1825/US IPS Structural System SolutionsProfiles
29 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
Pro
files
& E
nd
Cap
s
Cover Strip/Panel Holders
1" Series1.5" Series
A1/8"
3/16" - 1/4"
B1/4"5/16"
• T-slot covering can be cuteasily with tin snips.
• Wires and cables can beconcealed in T-slot with useof T-slot cover.
• 12-101 & 12-090 Can beinserted upside down and usedas a gasket for T-slot insertedpanels.
AB
0.33"
0.43"
0.20"
0.39"
0.22"
0.36"
0.20"
0.28"
0.30"
0.10"
0.29"
0.09"
12-095
12-090
12-111B
12-102
12-101
1.5" Series
1" Series
ApplicationT-slot cover is primarily used to coverthe T-slots in the extrusion to preventdust and other debris from building up.The T-slot covers used in conjunctionwith the extrusion T-slots provide a greatwiring duct to conceal cables.
Select T-slot covers can be inverted andused as a panel gasket to secure panelsin the extrusion T-slot.
Technical DataCover/Gasket: Polypropylene,semi-clear, black or yellow
PVC Cover: black or blue
Aluminum Cover: Clear or blackanodized
Ordering InformationDescription Unit Weight Color Part #Cover/Gasket Strip 1.5" Each @ 78.75" 0.088 lb/ft Clear 12-101
Black 12-101BYellow 12-101Y
Aluminum Cover Strip 1.5" Each @ 78.75" 0.11 lb/ft Clear 12-102Black 12-102B
PVC Cover Strip 1.5" Each @78.75" 0.097 lb/ft Black 12-111BBlue 12-111BL
Cover/Gasket Strip 1" Each @78.75" 0.073 lb/ft Clear 12-090Black 12-090BYellow 12-090Y
Aluminum Cover Strip 1" Each @ 78.75" 0.077 lb/ft Clear 12-095Black 12-095B
Full length packages are available. Please consult your local sales representative fordetails and pricing.
.1 5 1
Specialty Profiles
Catalog 1825/US IPS Structural System SolutionsProfiles
30 Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA
End Caps
End Caps
0.19"
0.50"
0.13"
0.42"
1.5" Series 1" Series
B
A
B
A
R1.50"
B
A
45°
A
B
B
A
.1 5 1ApplicationCaps are used to cover the exposedends of profiles after assembly. Thecaps provide both protection frompotentially sharp edges, and also anaesthetically pleasing appearance.
Assembly HintPress end cap into end hole(s), thenlightly tap with rubber or plastic mallet tosecure.
Technical DataGlass-filled nylon, black
Ordering InformationSize (A x B) Unit Weight Part #
1.5" Series
1.5" x 0.75" Each 0.14 oz 18-1575
1.5" x 1.5" Each 0.25 oz 18-1515
1.5" x 1.5" Quarter Round Each 0.21 oz 18-1543
1.5" x 1.5" x 45° Each 0.21 oz 18-1545
1.5" x 3" Each 0.5 oz 18-1530
3" x 3" Each 1 oz 18-3030
1" Series
1" x 1" Each 0.12 oz 18-1010
1" x 2" Each 0.25 oz 18-1020
1" x 3" Each 0.37 oz 18-1030
2" x 2" Each 0.49 oz 18-2020
Access Hole Plugs
9/32" Plastic Each 0.04 oz 18-710
9/32" Nickel Plated Steel Each 0.18 oz 18-713
18-101018-1515
18-1543
18-1545
18-102018-103018-1530
18-202018-3030