section 10a-1 10a cutouts and cutout-arrester...
TRANSCRIPT
10A-1
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006Printed in USA
Section
10A
CUTOUTS (Standard, Linkbreak & Loadbreak)
andCUTOUT-ARRESTER COMBINATIONS
CAUTION: Theequipmentcoveredinthiscatalogsectionshouldbeinstalled,used,andservicedonlybycompetentper-sonnelfamiliarwithandfollowinggoodworkandsafetypractices.Thisequipmentisforusebysuchpersonnelandisnotintendedasasubstituteforadequatetrainingandexperienceinsafeproceduresforthistypeofequipment.
Thiscataloginformationandanyrelatedinstructionsheetsdonotcoveralldetailsorsituationsinequipmentusenordotheyprovideforeverypossiblecontingencytobeencounteredinrelationtoinstallation,operationormaintenance.Shouldadditionalinformationanddetailsbedesired,orifspecificsituationsarisethatarenotcoveredadequatelyfortheuser'spurposethespecificsshouldbereferredtoHubbellPowerSystem,Inc.
Warranty - MaterialHubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workmanship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer's exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory, at the Company's option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY'S PRODUCTS OR ANY SALE OR USE THEREOF. The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company's warranty shall run only to the first Buyer of a product from the Company, from the Company's distributor, or from an original equipment manufacturer reselling the Company's product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplication or misuse of said product.
Warranty - ApplicationHubbell Power Systems, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge.
Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by Hubbell Power Systems, Inc., its liability will be limited to the re-performance of any such analysis or study.
©Copyright 2006 Hubbell • 210 North Allen Street • Centralia, MO 65240NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.
10A-�
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
U.S. Patent 4,546,341; 6,392,526 and other Patents Pending
Type C Cutouts
LOADBREAK cutout with Arc-Chute interrupter, pages 11-13
STANDARD cutout, pages 3-7
LINKBREAK cutout, pages 8-10
CUTOUT-ARRESTERCombinations,page 14
Application
Theprimarypurposeofanycutoutistoprovideprotectiontothelinesofyoursystemandthevariousapparatusonthoselinessuchastransformersandcapacitorbanks.ChanceTypeCcutoutsprovidereliableprotectionfromlow-leveloverloadsthatjustmeltthefuselink,intermediatefaults,andveryhighfaults,throughmaximuminterruptcapacity.
Inaddition,TypeCcutoutscanalsobeusedasasectionalizingdevice.Withtheuseofaportableloadbreaktool,TypeCcutoutscanfunctionmuchlikeanoverheaddisconnectswitch.A300ampdisconnectbladeisalsoavailableforthispurpose.
Ratings/Specifications
STANDARDTypeCcutoutshavemaximumdesignvoltagerat-ingstosimplifytheconfusingratingsofcutouts.Thereareno restrictionsonapplicationtogroundedwye,ungroundedwye,ordeltasystemshavingmaximumoperatingvoltages(line-to-line)equaltoorlessthanthecutoutmaximumdesignvoltagerating.(SeetheLINKBREAKandLOADBREAKcutoutsfortheirspecifications.) Interruptiontestshavebeenperformedatfullsystemline-to-linevoltage.Ineachvoltageclass,therearecontinuouscurrentratingsof100amps,200ampsand300amps.Seethetableonpage6forotherspecifications.
10A-�
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
Insulators
TheinsulatorsusedonTypeCcutoutsareasky-glazegray.Themetal tometal leakagedistanceon the15kVcutoutinsulatoris8.7inches(220mm),12.6inches(320mm)onthe27kV[125kVLIW(BIL)],17.3inches(440mm)onthe27kV[150kVLIW(BIL)],26inches(660mm)onthe36kV[170kVLIW(BIL)],and28.4inches(720mm)onthe36kV[170kVLIW(BIL)].
Fuseholders
Thesolidcaponthesingleventfuseholderisacopperalloy,silver-platedtoprovideefficientcurrenttransfer.Anintegralringisprovidedinthetoptubecastingforopeningandclos-ingthefuseholderwithconventionaldisconnecttoolsfromtheground,fromabuckettruckorfromthepole.
Thetoggle type trunnion casting isaselectivesilver-plated bronze for efficient current transfer to the lowerhingecontacts.Acamshapedprojectiononeachsideofthetrunnion casting provides high pressure parallel currentpathstothelowercontacts.Theseprojections,orpivotpins,are cast full round for smoothrotationaloperation in thehinge. The link ejector assists in arc interruption duringlowfaultcurrentorexcessiveoverloadconditions.Agrooveinthecenterofthelinkejectorallowsthefuselink’spigtailtogodirectlyfromthefusetubetotheattachmentnut.Acurvedejectorminimizesbendingstressesinthepigtailtopreventbrokenstrands.Astainlesssteeltorsionspringonthelinkejectorhelpstorapidlyejectthelinkfromtheboreof the fuseholder during interruption. The 200 amp linkejectorhasawidergrooveareaandincreasedspringforcetoaccommodatethelargerlinks.
Thelink ejector ispinnedtothetrunnioncastingwithastainlesssteelpintoprovideresistancetocorrosiveelementsandprovidesmoothpivotalaction.Aninterlockingfeaturebetweenthelinkejectorandtubecastingpreventsexcessivetensiononthefuselinkduringclosure,therebypreventinglinkbreakage.
Thelink ejectoremploysahammereffecttoenhancetoggleactionofthetrunnionduringlowfaultandoverloadinter-ruptions,hencedropoutactionisenhanced.Thelinkejectorprovides sufficient surface area to facilitate re-fusing bylinemenwearinggloves.
Quality ConstructionEfficient Current Transfer
TheChanceTypeCcutouthasanallcoppercurrentpath.Allcontactsaresilver-plated.Terminalsaretin-platedbronzeforusewithcopperoraluminumconductors.
Loadbreak Hooks
GalvanizedsteelhooksarestandardonallTypeCcutouts,exceptthearcchuteversion,forusewithaportableloadbreaktool.Thesesturdyhooksaremountedonthetopsupportandservetoguidethefuseholderintothelatchsocketwhenclos-ingatanoff-centerangle.
Top Contact
Thetopcontactisattachedtothegalvanized-steelhoodbyastainlessrivettoprovideasmoothself-aligningactionduringclosingeveninseverelycorrosiveenvironments.Thetopcon-tactprovidesasocket-typecavityforlatchingthefuseholderandpreventsanypossible“over-travel”ofthefuseholder.Thetopcontactismadeofahighlyconductivecopperstripwithsilver-platedembossmentstoresistcorrosion.Thecontactsareheldunderconstantpressuredesignedtomaintainfirmcontactwiththefuseholdercontactsurfaceuntilfaultinter-ruptionisaccomplished.
Hinge
ThehingeontheTypeCcutoutemployslargepivotareasforthefuseholder’strunnionandiscastofacopperalloychosenforitsstrengthandcorrosionresistance.Thehingecontactsarehighlyconductivecopperalloystampingsandareplatedtoassurelowresistancecurrenttransferfromthetrunnioncasting.Theparallelcurrentpathsarebackedupbyhighstrengthcantileverspringsandarerivetedtothehingecast-ings.Fuseholdercanbedroppedintoplaceandeasilyliftedupandout.Notrickymaneuvering.
Type C STANDARD Cutout
Chance Type C fuseholders are also mutually interchangeable with the S & C Electric Company’s Type XS cutout.
100 AmpSingle Vent
200 AmpSingle Vent
300 AmpDisconnect
10A-�
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
Type C STANDARD Cutout
kVLIW(BIL)
110
125
150
170
STANDARD Type C Cutout withNEMA Type B Bracket Dimensions
A16"
406mm163/8"
416mm163/8"
416mm171/4"
438mm
B51/2"
137mm71/8"
181mm71/8"
181mm81/2"
216mm
C103/4"
273mm121/2"
318mm121/2"
318mm15"
381mm
D31/2"
89mm31/8"
79mm31/8"
79mm13/4"
44mm
E211/2"
559mm263/4"
679mm263/4"
679mm321/2"
826mm
PRODUCT FEATURESInterchangeabilityChance was the first to design a cutout that could inter-change fuseholders and mounting assemblies with thoseofanothermanufacture.StandardTypeCfuseholdersandmountingassembliesaremutuallyinterchangeablewiththeS&CElectricCompany’sTypeXScutout(withinthesamevoltageclass).
FusetubeThe1/2-inchinsidediameteroftheTypeCcutout’s100amperefusetube increases internal pressure giving superior andreliable expulsion action. During frequently encounteredintermediatefaultrangesthisdiameteralsopermitshigherTRV(transientrecoveryvoltage)valuestobetolerated.Thissmall bore design eliminates any concern related to highimpedancephase-to-phase faults onungroundedwyeanddeltasystems.
The inside liner is constructedof a syntheticarc-quench-ingmaterial.Thetubeismadeoffiberglasswhichpermitsthesmallerboreandprovidesahigherburststrength.Itisprotectedfromtheweatherandenvironmentbyaspecialultra-violetresistantcoating.
Also,theChancefusetubeoperateswithfuselinksfromallmajorsuppliers.
BracketsCcutoutscomepackedonepercartonincludingaNEMAHeavyDuty“B”bracketwithcaptive11/2"boltforcrossarmmounting.
TypeXbrackets,alsoforcrossarmmounting,provides25/8"additionalclearancebetweenthecrossarmandthecutout.
“D” brackets are used to mount cutouts and/or arrestersdirectlytothepole.Threebracketsmaybeusedforthree-phaseapplication.TypeDbracketsprovideaclean,quickmountingwithoutcrossarmorspecialpolebands.
Alltheabovebracketsaregalvanizedsteelforlonglastingservice.Cutoutscanbeorderedwithoutanybrackets.
Higher Interrupt CapacitiesByusingacopperarcshorteningrodinsidethetopofthefusetube, higher interrupt ratings are obtainable.An arcshorteningrodisattachedtothecapofsomefusetubesandlowers the fuse link within the fusetube. This permits amuchshorterarc,resultinginlessarcenergy,andhigherinterruptingcapacities.
For200Atubes,itallowsforfullvoltagerating.
Itisnecessarytousefuselinkswithremovablebuttonheadswhenarcshorteningrodsareemployed.
170 kV LIW (BIL)A170kVBILTypeCcutout isavailable foruse inareaswherethe28.4-inchminimumleakagedistancetogroundisrequired.Seeorderingdata,page6.
Extra Corrosion Protection [150 & 170 kV LIW (BIL) only]TypeCcutoutsareavailablewithcomponentsofstainlesssteel inserts, hood and bolts, and copper alloy loadbreakhookstooffergreatercorrosionresistanceforenvironmentalareaswherecorrosioncanbecomeamajorfactor.Toorderastainlesssteel/copperalloycutoutaddthesuffix“S”totheendofthecatalognumberwiththeratingspecificationsde-sired.Inadditon,anoptionalspringassistmaybeprovidedtofurtherenhancethetoggleanddropoutactioninhighlycorrosiveapplications.
TerminalsTin-platedbronzeparallelgroovetypeterminalsarestandardon Type C cutouts. They can accommodate aluminum orcopperconductorsizesrangingfromNo.6(13.3mm2)solidcopperthrough4/0(160.6mm2)ACSRor250(167.5mm2)kcmilstrandedcopper.Theparallelgroovedesignisperfectforhandlingtwodifferentsizesofconductorasisthecasewhenarrestersarebeingused.Eyeboltsarealsoavailable.Seeorderingdata,page10A-6.
10A-�
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
STAINLESS-STEELSPRING ENSURESPROPER TOGGLE ACTIONOF FUSELINK EJECTOR(CAST-BRONZE ON ALL 200AND LINKBREAK FUSEHOLDERS;STAINLESS-STEEL ON ALL 100A)
Compare Chance® quality and technical expertise
SILVER-TO-SILVERCONTACTS
CAST BRONZE HINGEFOR CORROSION RESISTANCE
COPPERCURRENT PATH
FUSEHOLDER TOGGLE LATCHLIMITS TENSION OF FUSELINK
SILVER-TO-SILVERCONTACTSWITH STAINLESS STEELBACKUP SPRINGS
CAST BRONZELOWER TUBECASTING
CAST BRONZE TOP TUBE CASTINGAND PULL RING
HIGH-STRENGTH FIBERGLASS FUSETUBECOATED WITH ULTRA-VIOLET INHIBITOR
GALVANIZED STEEL HOOKSFOR LOADBREAK TOOL
STAINLESS STEELBACKUP SPRINGTO MAINTAINCONTACT PRESSURE
BIRD-PROOFED ONE-PIECESOLID-PORCELAININSULATOR
TIN-PLATED BRONZE TERMINALSFOR USE WITH COPPEROR ALUMINUM CONDUCTOR
GALVANIZED-STEEL CHANNEL
COPPER ARC-SHORTENING ROD (ON SOME RATINGS)
TWO-PLACE LOCKINGTO PREVENT SIDEMOVEMENT OF HOOD,CONTACTS OR HOOKS
HOT STICK HOLE IN TRUNNION CASTING
COPPER CURRENT PATH
Type C STANDARD CutoutAll Type C Cutouts meet or exceed ANSI/NEMA specifications.Manufacturing and/or use under U. S. Patent No. 4,546,341 and 6,392,526.
LARGE NUT TO FASTEN FUSELINK WITHOUT BREAK-ING STRANDS
MECHANICAL ASSIST:
FUSEHOLDER IS AVAIL-ABLE WITH A TORSIONAL SPRING ON TRUNNION TO AID DROP OUT OPERATION IN CORROSIVE ENVIRON-MENTS.
SyNTHETICFUSE TUBELINER
10A-�
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
*BaseCatalog No.
C710112C710114C710143C710133
320mm320mm320mm320mm
*AdjusttotalweightwhenselectingOptionsbelow.**Momentaryrating—Solidblade‡Mustuseremovablebuttonheadfuselinks.
†Forapplicationonsingle-phasetoneutralorthree-phasesolidly-groundedwye-connectedcircuitswhererecoveryvoltagedoesnotexceedthemaximum-designvoltageofthedevice.
Type C STANDARD Cutout
Maximum DesignVoltage15kV15kV15kV15kV
NominalSystem Voltage
Thru14.4kVThru14.4kVThru14.4kVThru14.4kV
220mm220mm220mm220mm
ArcShortening
RodNoYes‡
Yes‡
N/A
ContinuousCurrent(Amps)
100100200300
8.7"8.7"8.7"8.7"
Leakage to GroundMetal to Metal
InterruptCapacity
(Asym Amps)10,00016,00012,000
12,000**
27 kV - 125 kV LIW (BIL) — RUS Listed27kV27kV27kV27kV
NoYes‡
Yes‡
N/A
100100200300
8,00012,00010,000
12,000**
Thru24.9kVThru24.9kVThru24.9kVThru24.9kV
C710211C710213C710242C710233
12.6"12.6"12.6"12.6"
27 kV - 150 kV LIW (BIL) — RUS ListedNoRestrictionsthru24.9kV;
†26.4thru34.5kVNoRestrictionsthru24.9kV;
†26.4thru34.5kVNoRestrictionsthru24.9kV;
†26.4thru34.5kVNoRestrictionsthru24.9kV;
†26.4thru34.5kV
440mm
440mm
440mm
440mm
660mm
660mm
660mm
26"
26"
26"
36kV
27kV
36kV
Yes‡
Yes‡
N/A
100
200
300
11,200
12,000
12,000**
36 kV - 170 kV LIW (BIL) — RUS ListedC710613
C710643
C710633
720mm
720mm
720mm
28.4"
28.4"
28.4"
36kV
27kV
36kV
Yes‡
Yes‡
N/A
100
200
300
11,200
12,000
12,000**
36 kV - 170 kV LIW (BIL) — RUS ListedC710713
C710743
C710733
Thru34.5kVNoRestrictionsthru24.9kV;
†26.4thru34.5kVThru34.5kV
Specifications and Ordering InformationAll Type C Cutouts meet or exceed ANSI/NEMA specifications.
15 kV - 110 kV LIW (BIL) — RUS Listed
Thru34.5kVNoRestrictionsthru24.9kV;
†26.4thru34.5kVThru34.5kV
No
Yes‡
Yes‡
N/A
C710311
C710313
C710342
C710333
27kV
27kV
27kV
27kV
100
100
200
300
8,000
12,000
10,000
12,000**
17.3"
17.3"
17.3"
17.3"
22.63/10.26
22.83/10.36
23.43/10.63
23.03/10.45
*Weight(lb./kg.)
14.23/6.4514.43/6.5515.03/6.8214.53/6.59
ReplacementFusetube
CapP7001535PE7001767PE7002146PP7001535P
17.73/8.0417.03/7.7217.73/8.0417.23/7.82
E7001743P
E7002117P
P7001535P
E7001743P
E7002117P
P7001535P
25.43/11.54
25.83/11.72
25.43/11.54
30.73/13.94
31.13/14.12
30.73/13.94
NOTE:26"fuselinksarerecommended.
NOTE:26"fuselinksarerecommended.
P7001535PE7001768PE7002479PP7001535P
P7001535P
E7001768P
E7002479P
P7001535P
NEMAHeavyDuty“B”bracketforcrossarm(11/2"bolt)Extendedtypebracketforcros-sarm(Horizontalsectionis25/8"longerthanTypeBbracket)D-shapebracket(pole)Nobracket(mustbeusedwithMinOption3)Nobracket(cannotusewithMinOption3)
*Option Suffix 1Terminal Variations
*Option Suffix 2Bracket Variations
*Option Suffix 3Mechanical Assist Fuseholder
*Weight(lb./kg.)
0.33/0.150.16/0.070.31/0.14
Suffix1PEL
Description
Parallel-grooveclampsSmalleyeboltsLargeeyebolts
Suffix3
Blank
M
Description
Nooption(maynotbeusedwithZinOption2)MechanicalAssistFuseholder(maynotbeusedwithBlankinOption2)
*Weight(lb./kg.)
2.84/1.29
3.75/1.70
7.67/3.48–––
–––
Suffix2
B
X
DZ
Blank
Description
Must specify one selection for Option 1.
See page 10A-15 for Accessories.
*Option suffixesbelow
1 23 1 23 1 23 1 23
1 23 1 23 1 23 1 23
1 23
1 23
1 23
1 23
1 23
1 23 1 23
1 23
1 23 1 23
10A-�
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
Universal Cutout ToolIdealforStandardandLinkbreak100ampfuseholders(ABB,ChanceS&C)toeasilyliftout,place,*openandclose.Inverted,securemethodalsofitsChanceElectronicSectionalizers.Cat.No.PSC4033484 (Wt. 4 oz.) SeeToolsCatalogSection2100.*When opening a cutout, follow all work rules and OSHA regulations. Not for use with Loadbreak cutouts.
Type C STANDARD CutoutFuseholders and Mounting Assemblies
Ordering Information
15 kV - 110 kV LIW (BIL)
5.85kg.12.9lb.
Weight Weight
36 kV - 170 kV LIW (BIL)T710613TT710643TT710633T
2.8lb.3.2lb.2.8lb.
1.27kg.1.45kg.1.27kg.
10.61kg.23.4lb.T7106MM
36 kV - 170 kV LIW (BIL)T710713TT710743TT710733T
2.8lb.3.2lb.2.8lb.
1.27kg.1.45kg.1.27kg.
13.02kg.28.7lb.T7107MM
27 kV - 150 kV LIW (BIL)
7.08kg.15.6lb.
9.66kg.21.3lb.
27 kV - 125 kV LIW (BIL)
300ABlade
100A 200AFuseholders
36 kV - 26" leakageT7106MMPB
36 kV - 28.4" leakageT7107MMPB
300ABlade
100A 200AFuseholders
300ABlade
200AFuseholders
100A
27 kV - 17.3" leakageT7103MMPB
27 kV - 12.6" leakageT7102MMPB
15 kV8.7" leakage
Catalog No.T7101MM
MountingAssembly only
▼
NOTE:26"fuselinksarerecommended.
NOTE:26"fuselinksarerecommended.
C710613C710643C710633
C710713C710743C710733
C710311C710313C710342C710333
T710311TT710313TT710342TT710333T
2.1lb.2.3lb.2.7lb.2.5lb.
0.95kg.1.14kg.1.22kg.1.13kg.
T7103MM
C710211C710213C710242C710233
T710211TT710213TT710242TT710233T
2.1lb.2.3lb.2.7lb.2.5lb.
0.95kg.1.14kg.1.22kg.1.13kg.
T7102MM
1.8lb.2.0lb.2.6lb.2.1lb.
*CutoutBase Catalog
NumberC710112C710114C710143C710133
0.82kg.0.91kg.1.18kg.0.95kg.
MountingAssembly only*Catalog No.
T7101MM
Fuseholder or Blade onlyCatalog No.T710112TT710114TT710143TT710133T
10A-�
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
Type C 100-AmpLINKBREAK Cutout
22/36.4 kV - 150 kV LIW (BIL)22/36.4 kV - 170 kV LIW (BIL)
15 kv - 110 kV LIW (BIL)15/27 kV - 125 kV LIW (BIL)
interchangeablewithanyothermanufacturer’scutout.
Allstandardnon-loadbreakfuseholdersandthelinkbreakfuseholdersareinterchangeableandfitintoboththenon-load-breakandTypeCLINKBREAKcutoutmountingassembliesproducedafterJanuary1985.MountingassembliesaresameasTypeCSTANDARDcutouts,shownonpage10A-7.
Ratings / SpecificationsThe 15 kV Type C LINKBREAK cutout has a maximumdesignvoltageratingof15kV.Therearenovoltagerestric-tionsonapplicationtogroundedwye,ungroundedwye,ordeltasystemshavingmaximumoperatingvoltages(linetoline)equaltoorlessthanthecutoutmaximumdesignvolt-agerating.
The15/27and22/36.4kVTypeCLINKBREAKcutoutshavemaximumdesignslantvoltageratings.Thesecutoutsaretobeusedonsystemswhichhavephase-to-groundvoltagesnogreaterthanthevaluelistedtotheleftoftheslant(/)andwhichhavephase-to-phasevoltagesnogreaterthanthevaluelistedtotherightoftheslant.
The Type C LINKBREAK cutout is to be used with onlyChance,McGraw-EdisonandKearneyfuselinks.S&CElec-tricfuselinksandotherfuselinkswhichrequiremorethan1inchelongationbeforebreakingmustnotbeusedwiththeTypeCLINKBREAKcutout.
Asharpdownwardpullontheleverwithahookstickbreaksthefuselink.
15 kV - 110 kV LIW (BIL) unit
ApplicationTheChanceTypeC100ampLINKBREAKcutoutprovidesshortcircuitprotectiontoutilitylineswiththeaddedfeatureofmechanicallinkbreakcapabilityinaloadbreakingfunction.Linkbreakcutoutsprovidereliableprotectionfromoverloadsthatjustmeltthefuselinkthroughthemaximuminterruptcapacity of the fuseholderandalsoprovide inductiveandcapacitive loadbreakcapability.For loadbreakratingsseechart,nextpage.
TheunitwillalsoaccepttheTypeC200ampnon-loadbreakfuseholder or a 300 amp disconnect blade. Each LINK-BREAK cutout includes standard loadbreak hooks to usewithportableloadbreaktools.Thismethodisparticularlyusefulforswitchingofthe200ampfuseholderand300ampdisconnectblade.
Design / Product FeaturesConstructionandproductdetailsshownonpage10A-3applytotheLINKBREAKcutoutexceptthatthelink-ejectoronthelinkbreakfuseholderisacopper-alloycastinginsteadofastainless-steelstamping.
Theunitutilizesastainless-steellinkbreaklevertomechani-callybreakfuselinkelementstherebyobtainingloadinter-ruptionwithinthefuseholder.Thelongleverispositioneddirectlyin-linewiththecutout,ratherthanononesideorin back of the cutout for convenient pull-down operation.TheTypeCLINKBREAKfuseholderisnotdesignedtobe 15/27 kV - 125 kV LIW (BIL) unit
10A-�
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
Type C 100-AmpLINKBREAK Cutout
LINKBREAK Cutout with NEMA Type B Bracket
F165/8"422mm16"406mm16"406mm
141/2"368mm
A16"406mm
163/8"416mm
163/8"416mm
171/4"438mm
B53/8"137mm71/8"181mm71/8"181mm81/2"216mm
C103/4"273mm
121/2"318mm
121/2"318mm15"381mm
D31/2"89
mm31/8"79
mm31/8"79
mm13/4"416mm
E22"559mm
263/4"679mm
263/4"679mm
321/2"826mm
LIW (BIL)kV
110
125
150
170
CapacitiveAmperes
100100100100 50 50 50
*Specificationsandorderinginformationonnextpage.†Limitedtogrounded-wyesystemswithgrounded-wyeloads.
InductiveAmperes
100100100100100100100
kV,Nominal
System Voltage14.414.424.924.934.534.534.5
*Base CutoutCatalogNumberC720112C720114C720211†
C720213†
C720311†
C720313†
C720613†
Loadbreak Ratings
Dimensions
22/36.4 kV - 150 kV LIW (BIL) unit 22/36.4 kV - 170 kV LIW (BIL) unit
10A-10
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
C720211
C720213
26.13/11.85
‡Mustuseremovablebuttonheadfuselinks. *AdjusttotalweightwhenselectingOptionsbelow.
†Forapplicationonsingle-phasetoneutralcircuitswithphase-to-groundvoltagesnotexceedingthevaluetotheleftoftheslant;andforapplicationonthree-phasesolidly-grounded-wyesystemswithsolidly-groundedloadswithline-to-linevolt-agesnotexceedingthevaluetotherightoftheslant.
Maximum DesignVoltage15kV15kV
NominalSystem Voltage
Thru14.4kVThru14.4kV
220mm220mm
*Weight(lb./kg.)
ArcShortening
RodNoYes‡
ContinuousCurrent(Amps)
100100
8.7"8.7"
Leakage to GroundMetal to Metal
InterruptCapacity
(Asym Amps)10,00016,000
14.53/6.5914.73/6.68
Specifications and Ordering InformationAll Type C Cutouts meet or exceed ANSI/NEMA specifications.
15 kV - 110 kV LIW (BIL) — RUS Listed
22/36.4kV
22/36.4kV
22/36.4 kV - 150 kV LIW (BIL) — RUS ListedC720311
C720313
NoRestrictionsthru20.8kV;
†22.8thru34.5kV
660mm26.0"22/36.4kV Yes‡11,200
22/36.4 kV -170 kV LIW (BIL) — RUS Listed
C720613NoRestrictionsthru20.8kV;
†22.8thru34.5kV
15/27kV
15/27kV
No
Yes‡
8,000
12,000
100
100
15/27 kV - 125 kV LIW (BIL) — RUS ListedNoRestrictionsthru14.9kV;
†20.8thru24.9kV
12.6"
12.6"
320mm
320mm
lb.2.52.72.72.92.72.9
3.5
kg.1.131.221.221.321.221.32
1.59
WeightFuseholderCatalog No.T720112TT720114TT720211TT720213TT720311TT720313T
T720613T
CutoutCatalog Number
C720112PBC720114PBC720211PBC720213PBC720311PBC720313PB
C720613PB
kV& BIL15kV
110kVBIL15/27kV
125kVBIL22/36.4kV150kVBIL22/36.4kV170kVBIL
*Mounting assemblies are same as TypeCSTANDARD cutouts,shownonpage10A-7.
Type C 100-AmpLINKBREAK Cutout
110 kV BIL 170 kV BIL125 & 150 kV BIL
*Fuseholders (100 Amp only)
ReplacementFusetube
CapP7001469PE7001784P
P7001469P
E7001785P
17.23/7.82
17.43/7.91
No
Yes‡
8,000
12,000
100
100
17.3"
17.3"
440mm
440mm
P7001469P
E7001785P
23.03/10.45
23.23/10.54
100 PE7001787P
NOTE:26"fuselinksarerecommended.
*BaseCatalog No.
C720112C720114
NEMAHeavyDuty“B”bracketforcrossarm(11/2"bolt)Extendedtypebracketforcros-sarm(Horizontalsectionis25/8"longerthanTypeBbracket)D-shapebracket(pole)Nobracket(mustbeusedwithMinOption3)Nobracket(cannotusewithMinOption3)
*Option Suffix 1Terminal Variations
*Option Suffix 2Bracket Variations
*Option Suffix 3Mechanical Assist Fuseholder
*Weight(lb./kg.)
0.33/0.150.16/0.070.31/0.14
Suffix1PEL
Description
Parallel-grooveclampsSmalleyeboltsLargeeyebolts
Suffix3
Blank
M
Description
Nooption(maynotbeusedwithZinOption2)MechanicalAssistFuseholder(maynotbeusedwithBlankinOption2)
*Weight(lb./kg.)
2.84/1.29
3.75/1.70
7.67/3.48–––
–––
Suffix2
B
X
DZ
Blank
Description
Must specify one selection for Option 1.
See page 10A-15 for Accessories.
*Option suffixesbelow
1 23 1 23
1 23
1 23
1 23
1 23
1 23
10A-11
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
B
67/8"175mm
85/8"219mm
85/8"219mm
C
103/4"273mm
121/2"318mm
121/2"318mm
A
251/4"642mm
281/4"719mm
281/4"719mm
D
31/2"89mm
31/8"79mm
31/8"79mm
E
255/8"651mm
307/8"784mm
307/8"784mm
kV LIW (BIL)
110
125
150
Dimensions
Application
TheTypeCLoadbreakCutoutisavailableforapplicationon15,25and35kVdistributionsystems.Theadditionofthearc chuteexpands theflexibility of theChanceprotectivedevicesfamilybyprovidingloadbreakcapabilityforcutoutsanddisconnectsolidbladeunits.Theloadbreakcutoutpro-videsshortcircuitprotectiontoutilitylineswiththeaddedfeatureofaloadbreakingfunction.
The loadbreak cutout is applicable for transformer andcapacitorbankswitchingorlinesectionalizing.Loadbreakcutoutsprovideprotectionfromoverloadsthatjustmeltthefuselink through the maximum interrupt capacity of thefuseholder.Theyalsoprovideloadbreakcapabilitythrough300amperes.
Design
AlldesignfeaturesandmostcomponentsoftheloadbreakunitareidenticaltothoseincorporatedintheTypeCstan-dardcutout.TheloadbreakportionoftheTypeCLoadbreakcutoutisaheavyduty,reliableloadinterrupterthatprovidesapositivevisibleloadbreak.AcommonloadbreakmountingassemblywillaccepttheChanceTypeC100ampand200amploadbreakfuseholdersora300amploadbreakdiscon-nectblade.
Ratings/Specifications
The15kVTypeCloadbreakcutouthasamaximumdesignvoltageratingof15kV.Therearenovoltagerestrictionsonapplicatontogroundedwye,ungroundedwye,ordeltasys-temshavingmaximumoperatingvoltages(linetoline)equaltoorlessthanthecutoutmaximumdesignvoltagerating.
The15/27and20/34.5kVTypeC loadbreakcutoutshavemaximumdesignslantvoltageratings.Thesecutoutsaretobeusedonsystemswhichhavephase-to-groundvoltagesnogreaterthanthevaluelistedtotheleftoftheslant(/)andwhichhavephase-to-phasevoltagesnogreaterthanthevaluelistedtotherightoftheslant.
Fuseholders and mounting assemblies from other manu-facturers' loadbreakcutoutsarenot interchangeablewithChance loadbreak cutouts. Likewise, Chance fuseholdersandmountingsarenot interchangeablewithothermanu-facturers'loadbreakcutouts.
Operation
Theself-containedloadbreakdeviceenablesthelinemantointerruptloadcurrentbymeansofasimplehookstickopera-tion.Tobreakthecurrent,thelinemaninsertsahookstickintotheoperatingringandrapidlyopensthedevice.Uponopening, a spring-loaded stainless steel blade mechanismsnapsoutthroughagrayarcchuteandelongates,coolsandextinguishestheconfinedarc.Theloadbreakingoperationisindependentoftheoperatingspeedofthelineman.Thefuseremainsundamaged.Nospecialorportabletoolsarerequiredtooperatetheunit.Intheopenposition,thefuse-holderorbladehangsinanapproximateverticalpositionforthevisible-break.
Type CLOADBREAK Cutoutwith Arc Chute type interrupter• 15 kv • 15/27 kV • 20/34.5 kV
10A-1�
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
20/34.5kV
20/34.5kV
ReplacementFusetube
CapP7001535PE7001767PE7002146PP7001535P
*BaseCatalog No.
C730112C730114C730143C730133
Type CLOADBREAK Cutout
with Arc Chute Interrrupers
15 kV - 110 kV LIW (BIL) — RUS Listed
NominalSystemVoltage
Thru14.4kVThru14.4kVThru14.4kVThru14.4kV
InterruptCapacity(AsymAmps)10,00016,00012,000
12,000**
19.33/8.7719.53/8.8620.13/9.1319.63/8.90
Continuous& Loadbreak
Current(Amps)
100100200300
*Weight(lb./kg.)
ArcShort-eningRodNoYes‡
Yes‡
N/A
Numberof
Operations20020020050
Leakageto Ground,
Metal to Metal8.7"8.7"8.7"8.7"
220mm220mm220mm220mm
MaximumDesignVoltage15kV15kV15kV15kV
15/27 kV -125 kV LIW (BIL) — RUS Listed
NoRestrictionsthru14.4kV;
†20.8thru24.9kV
8,00012,00010,000
12,000**
100100200300
NoYes‡
Yes‡
N/A
20020020050
15/27kV15/27kV15/27kV15/27kV
C730211C730213C730242C730233
12.6"12.6"12.6"12.6"
320mm320mm320mm320mm
20/34.5 kV -150 kV LIW (BIL) — RUS ListedNoRestrictionsthru14.4kV;
†20.8thru34.5kV
8,000
12,000
100
100No
Yes‡
100
100C730311
C730313
17.3"
17.3"
440mm
440mm
**Momentaryrating—Solidblade ‡Mustuseremovablebuttonheadfuselinks.*AdjusttotalweightwhenselectingOptionsbelow.
†Forapplicationonsingle-phasetoneutralcircuitswithphase-to-groundvoltagesnotexceedingthevaluetotheleftoftheslant;andforapplicationonthree-phasesolidly-grounded-wyesystemswithsolidly-groundedloadswithline-to-linevoltagesnotexceedingthevaluetotherightoftheslant.
20/34.5 kV,150 kV LIW (BIL)
▼
15 kV, 110 kV LIW (BIL)▼
15/27 kV,125 kV LIW (BIL)
▼
Specifications and Ordering InformationAll Type C Cutouts meet or exceed ANSI/NEMA specifications.
21.93/9.9522.13/10.0422.83/10.3622.33/10.13
P7001535PE7001768PE7002479PP7001535P
27.73/12.58
27.93/12.67
P7001535P
E7001768P
*Option Suffix 1Terminal Variations
Suffix1PEL
Parallel-grooveclampsSmalleyeboltsLargeeyebolts
Must specify one selection for Option 1.
*Option Suffix 2Bracket Variations
*Option Suffix 3Mechanical Assist Fuseholder
*Weight(lb./kg.)
0.33/0.150.16/0.070.31/0.14
Description Suffix3
Blank
M
Description
Nooption(maynotbeusedwithZinOption2)MechanicalAssistFuseholder(maynotbeusedwithBlankinOption2)
*Weight(lb./kg.)2.84/1.29
3.75/1.70
7.67/3.48–––
–––
Suffix2B
X
DZ
Blank
Description
NEMAHeavyDuty“B”bracketforcrossarm(11/2"bolt)Extendedtypebracketforcros-sarm(Horizontalsectionis25/8"longerthanTypeBbracket)D-shapebracket(pole)Nobracket(mustbeusedwithMinOption3)Nobracket(cannotusewithMinOption3)
See page 10A-15 for Accessories.
*Optionsuffixesbelow
1 23 1 23 1 23 1 23
1 23 1 23 1 23 1 23
1 2 3
1 2 3
10A-1�
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
3.3lb.3.5lb.4.1lb.3.6lb.
CutoutCatalogNumberC730112C730114C730143C730133
1.5kg.1.6kg.1.9kg.1.6kg.
15 kV - 110 kV LIW (BIL)Mounting As-sembly only*Catalog No.
T7301MM
Fuseholder or Blade onlyCatalog No.T730112TT730114TT730143TT730133T
8.4kg.18.6lb.
Weight Weight
20/34.5 kV - 150 kV LIW (BIL)C730311C730313
T730311TT730313T
3.6lb.3.8lb.
1.6kg.1.7kg. 12.1kg.26.6lb.T7303MM
3.6lb.3.8lb.4.4lb.4.0lb.
9.4kg.20.8lb.T7302MM
1.6kg.1.7kg.2.0kg.1.8kg.
T730211TT730213TT730242TT730233T
15/27 kV - 125 kV LIW (BIL)C730211C730213C730242C730233
20/34.5 kV — T7303MMPB
15 kV — T7301MMPB
200A100A 300A
300ABladeFuseholders
100A 200A
Type CLOADBREAK CutoutFuseholders and Mounting Assemblies
Replacement Arc Chute Interrupter:CatalogNo.T7300080(1.2lb./0.54kg.)
15/27 kV — T7302MMPB
10A-1�
JUNE 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI
kVLIW(BIL)110125150170
E22"(559mm)
263/4"(679mm)263/4"(679mm)321/2"(826mm)
G233/4"(603mm)251/2"(648mm)251/2"(648mm)28"(711mm)
Type CCUTOUT-ARRESTER COMBINATIONS
15 kV cutout with direct-connected Ohio Brass large-block, MOV, polymer 9 kV lightning arrester
Advantages of combinationChancecutout-arrestercombinationscostlessthanthetotalcostofseparatelypurchasedcomponents.Thecombinationunitsinstallfaster,moreeconomicallyandtakeuplessspaceinstorage, transitandservice.Eachcombinedunit takesupaminimumofspaceonthecrossarmandhasafavorableweightdistributionforminimaloff-centerloading.Thefield-provenqualityofbothcutoutandarresterassureconsistent
Over-the-Arm Type only
Cutout-ArresterDimensions
13"(330mm)
highperformanceforthecombinations.
TheseunitsincludeChancecutoutsfittedwithonlyOhioBrass®MOVarresters,supersedingprevioussilicon-carbideunits.Foreasyconversiontothenewarresterdesignationsystem,refertotheCutoutCross-ReferenceGuide,Bulletin10-0203.
Ordering InformationTospecifyaCutout-ArresterCombination:
1.Selectatwo-letterdesignationfortheappropriatearresterfromtheshadedsectionoftheTableatleft.
2.Substitutethetwolettersforthe“0”intheBaseCatalogNo.fortheappropriateCutoutlistedonpage6,10or12.
Direct
Direct
Direct
SmallBlockNormalDuty
5kA
LargeBlockHeavyDuty
10kA
RiserPole
Oh
ioB
rass
9
DL
EL
FL
10
DM
EM
FM
18
DN
EN
FN
27
DP
EP
FP
125&150
150110
Polymer
MetalOxideVarister(MOV)OperatingDesign
Housing
kV LIW (BIL)for Cutout
kV RatingMC
OV
Du
ty C
ycle
kV R
atin
g
Arr
este
r M
anu
fact
ure
r
Arr
este
rC
on
nec
tio
nM
eth
od
10A-1�
HUBBELL / CHANCE – CENTRALIA, MISSOURI JUNE 2006
Universal Cutout Tool
Ideal forStandard andLinkbreak100amp fuseholders (ABB,Chance,S&C)toeasilyliftout,place,*openandclose.Inverted,securemethodalsofitsChanceElectronicSectionalizers.
Cat.No.PSC4033484 (Wt. 4 oz.) SeeToolsCatalogSection2100.*When opening a cutout, follow all work rules and OSHA regulations. Not for use with Loadbreak cutouts.
Accessories
Catalog No.T7001325T7001326T7001327
Terminal ConnectorsMin. Order Qty.
101010
DescriptionParallel-GrooveClamp,tin-platedbronzeforNo.6solidthru4/0ACSRor250kcmilstrandedSmallEyeboltforNo.8solidthru2/0strandedLargeEyeboltforNo.6solidthru4/0ACSRor250kcmilstranded
C2060283C2060280C2060299C2060632
Mounting Brackets————
NEMAHeavyDuty“B”Bracketwith11/2"captiveboltforcrossarmmountingExtendedCrossarmBracket(Horizontalsectionis25/8"longerthanNEMA“B”bracket)“D”PoleMountingBracketCutout/ArresterBracketcompletewithcarriageboltsandbackstrap
Mounting Bracket Dimensions
Wt. (lb./kg.)0.33/0.150.16/0.070.40/0.14
2.84/1.293.75/1.707.67/3.484.00/1.81
Web: http://www.hubbellpowersystems.comE-mail: [email protected]
®®® ®™
MEXICO
HUBBELL DE MEXICO, S.A. DE. CVAv. Coyoacan No. 1051Col. Del Valle03100 Mexico, D.F.Phone: 52-55-9151-9999Fax: 52-55-9151-9988e-mail: [email protected]
CANADA
HUBBELL CANADA LP870 Brock Road SouthPickering, Ontario L1W 1Z8Phone: 905-839-1138Fax: 905-831-6353e-mail: [email protected]
UNITED STATES
HUBBELL POWER SYSTEMS, INC.210 N. Allen Centralia, Mo 65240-1395Phone: 573-682-5521Fax: 573-682-8714e-mail: [email protected]