Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 1

Multi PC-Control functionality

Maximum four PC’s in one network can be used with all Application Software Modules running on all Control PC’s.

Maximum ten PC’s in one network can be used with maximum two Application Software Modules on each Control PC active.

Maximum ten PC’s in one network can be used with maximum two Application Software Modules on each Control PC active.

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 2

PC’s with Ethernet Link

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 3

PC’s with Ethernet Links

Server PC Client PC-1 Client PC-9

50 Ω 50 Ω

Server PC Client PC-1 Client PC-9UTP

HUB

UTP UTP

Server PC Client PC-1UTP UTP

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 4

Installed Application Software Modules in a Multi PC Control system

local area networklocal area network

Client PCServer PC

S 1M 2 M 2S 1 Off 1M 4

M 1M 1 M 4Off 1

Off 2M 5

S 4M 3 M 2S 2

M 2S 4 Off 2M 5

S 4M 3

M 2S 3

M 1M 1

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 5

Installed Application Software Modules in a Multi PC Control system

Master applications are only available if installed

M 1 = Master with full functionality on all PC’s where this application is installed.

M 2 = Master with full functionality on one PC only.

M 3 = Master with full functionality for Parliamentary or Multi -Voting on one PC only.

M 4 = Master with full functionality on one PC only and no slaves possible.

M 5 = Master with full functionality on Server PC only and no slaves possible.

Slave applications are only available if installed and if the Master application is running

S 1 = Slave with limit functionality.

S 2 = Slave for monitoring only. Extra Printout and file saving.

S 3 = Slave for monitoring only. Extra Printout facility.

S 4 = Slave for monitoring only.

Off 1 = No slave function possible.

Off 2 = No slave function possible.This application can only set as Master on the Server PC.

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 6

DBPATH in a Multi PC Control systemServer PC Client PC

local area networklocal area network

DBDPATH=\\SERVER\C-DCN\DCN\DBS\

MPCPath=\\SERVER\C-DCN\DCN\

SYSPATH=C:\DCN\

MPCPath=C:\DCN\

DBDPATH=C:\DCN\DBS\

GUI

LocalDBDPath=C:\DCN\DBS\

SYSPATH=C:\DCN\

GUI

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 7

DBPATH in a Multi PC Control systemServer PC Client PC

local area networklocal area network

DBDPATH=\\SERVER\C-DCN\DCN\DBS\

MPCPath=\\SERVER\C-DCN\DCN\

SYSPATH=C:\DCN\

MPCPath=C:\DCN\

DBDPATH=C:\DCN\DBS\

LocalDBDPath=C:\DCN\DBS\

SYSPATH=C:\DCN\

DataData

Security Systems BU Communication Systems

DCN MPCC SD MPCF09.12.2004 DCNDCN ST/SEU-CO 8

Multi PC-Control functionality

End of section

Robert Bosch GmbH

All rights are reserved. Reproduction or passing on to

third parties in whole or in parts is prohibited without the

written consent of the copyright owner.