see list of goods eligible for the bndes' support

Classification: Unrestricted Document

Management Unit: AEX

LIST OF FINANCEABLE PRODUCTS Applicable to financing lines for exports BNDES -exim

GROUP I

MCN DESCRIPTION

3815.12.10 Supported catalysts, ceramic or metallic honeycomb to convert exhaust gas from vehicles

4010.3 Transmission belts

4011.20 New tires for buses and trucks

4011.30 New tires for airplanes

4011.6 * New tires for agricultural and forestry machinery, dump trucks and construction vehicles, except 4011.69.90 (see GROUP II)

4011.9 * New tires for tractors, other agricultural and forestry machinery, dump trucks and other construction vehicles, except 4011.99.90 (see GROUP II)

6813.81.10 Brake pads

6813.89.10 Friction disc for clutches

6909.12.20 Needle guides for printer heads

6909.19.20 Other needle guides for printer heads

7007.11.00 Safety-tempered glass in sizes and formats suitable for application in cars, aircraft, boats or other vehicles

7007.21.00 Safety glass (glass bonding) in sizes and formats for application in cars, aircraft, boats or other vehicles

7009.10.00 Rear-view mirrors for vehicles

7304.1 Piping used for oil or gas pipelines

7304.2 Casing for wells, for production or supply, and drill lines, used to drill for oil or gas


7305.20.00 Casing and piping for wells, used to drill for oil or gas


7306.2 Casing and piping for wells, for production or supply used to drill for oil or gas

7307 Pipe fittings (for example, couplings, elbows, sleeves/joiners), made of iron or steel.

7308.10.00 Bridges and bridge parts

7308.20.00 Towers and gateways

7309.00 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), cast iron, iron or steel, with a capacity exceeding 300 liters, not fitted with mechanical or thermal equipment even if lined or heat-insulated

7310.10.10

Liquid-nitrogen-cooled Isothermal containers used for semen, blood, biological tissues and other similar products, with a capacity exceeding 50 L



GROUP I MCN DESCRIPTION

7310.29.20

Liquid-nitrogen-cooled Isothermal containers used for semen, blood, biological tissues and other similar products, with a capacity lower than 50 L

7311.00.00 Containers for compressed or liquefied gas, made of iron or steel

7322.90.10 Liquid-fuelled air heaters with a capacity greater than or equal to 1.500 kcal/h but less than or equal to 10,400 kcal/h, used in motor vehicles

7325.91.00 Cast iron balls and similar articles for mills

7326.11.00 Iron or steel balls and similar articles for mills

7326.90.10 Elliptical cylinder cover made of steel or nickel in accordance with ASME SA 353, used to manufacture containers for compressed or liquefied gas

8207.30.00 Tools for pressing, stamping or punching

8301.20.00 Locks used in motor vehicles

8302.30.00 Other detailing, steel finishings and similar articles for motor vehicles

8307.10 Flexible tubing made of regular metal, with or without iron or steel accessories

8402

Steam boilers (steam generators), excluding central heating boilers designed to produce hot water and low-pressure steam; called "Superheated water" boilers

8403 * Central heating boilers other than those listed under 8402, except 8403.10.10 (see GROUP II)

8404

Boiler accessories listed under 84.02 or 84.03 (for example: economizers, super-heaters, piping cleaners or gas recovery); condensers for steam engines

8405

Air gas (lean gas) or water gas generators, with or without scrubbers; acetylene generators and similar gas generators, driven by water, with or without purifiers

8406 Steam turbines

8407 Piston reciprocating or rotary engines, with spark ignition (explosion engines)

8408 Piston engines, with compression ignition (diesel or semi-diesel engines)

8409 Parts exclusively or specifically earmarked for engines listed under 8407 or 8408

8410 Hydraulic turbines and wheels, and their respective regulators

8411 Turbojet engines, propellers and other gas turbines

8412 Other engines and motors

8413 Pumps for liquids, even with a measuring device; liquid holding bays

8414 *

Air or vacuum Pumps, air compressors or other gas compressors and fans; overhead exhausts (*exhausts) for extraction or recycling with a built-in fan, even if they have filter, except 8414.20.00, 8414.30.11, 8414.30.91, 8414.51, 8414.60.00 and 8414.90.20 (See GROUP II)

8415.10.90 Machines and air-conditioning used on walls or in windows, forming one singular body or the "split-system" (system with separate elements) except those with capacity less than or equal to 30,000 BTUs and "Split- systems" (system with separated elements)




8415.20.90

Air-conditioning machines and devices used for the comfort of passengers in motor vehicles, except those with capacity lower than or equal to 30,000 BTUs

8415.81.90

Air conditioning machines and devices with a cooling device and valve inversion for the heat cycle (reversible heat pumps), except with capacity lower than or equal to 30,000 BTUs

8415.82.90 Air-conditioning machines and devices with a cooling device, except with capacity lower than or equal to 30,000 BTUs

8415.83.00

Air-conditioning machines and devices, except those used on walls or in windows, those used for the comfort of passengers in vehicles with no cooling device

8415.90.90 Other parts of air-conditioning machines and devices

8416

Burners to feed furnaces with liquid fuels, pulverized solid or gas fuels; automatic furnaces, including pre-heaters, mechanical grates, mechanical ash unloaders and similar devices

8417 Industrial or laboratory furnaces and ovens, including non-electric incinerators

8418.50

Freezers and refrigerators, display fridges, counters and similar mobile items, to produce cold except refrigerator-freezer combinations, with separate external doors, domestic refrigerators, chest freezers, with capacity not exceeding 800 liter, upright freezers with capacity not exceeding 900 liters

8418.61.00 Heat pumps, except for machinery and air-conditioning units listed under 84.15

8418.69.10 Non-domestic machines for making ice cream

8418.69.20 Milk coolers

8418.69.91 Water chillers, and those that absorb lithium bromide

8418.69.99

Other materials, machinery and devices to produce cold; heat pumps, except compression groups whose condensers are one heat exchanger, non-domestic machines for making ice cream, milk coolers, water, juice or carbonated beverage dispensers, water coolers and those that absorb lithium bromide

8418.99.00 Parts of refrigerators or freezers and other materials, machinery to produce cold; heat pumps, excluding machines and air-conditioning units listed under 84.15, except cabinets or furniture designed to receive equipment to produce cold

8419.20.00 Medical, surgical or laboratory sterilizers

8419.3 Dryers

8419.40 Distilling or rectifying devices

8419.50 Heat exchangers

8419.60.00 Machinery and devices to liquefy air or other gases

8419.8 Appliances and devices, except non-electric water heaters, instantaneous heating or heat storage, medical, surgical or laboratory sterilizers, dryers, distilling or rectifying devices, heat exchangers, devices to liquefy air or other gases




8419.90.20 Parts of distillation or rectification columns

8419.90.3 Parts of plate heat exchangers

8419.90.40 Parts of devices or appliances listed under 8419.81 or 8419.89

8419.90.90

Parts of equipment and devices to treat materials in processes involving a change of temperature, except those for household use; non-electric water heaters, instantaneous heating or heat storage, except parts of water heaters listed under 8419.11 or 8419.19, parts of distillation or rectification columns, heat exchangers, plates and appliances or devices listed under 8419.81 or 8419.89

8420 Calendering or other rolling machines, except those for metals or glass, and their respective cylinders

8421 * Centrifuges, including centrifugal dryers; apparatus for filtering or purifying liquids or gases, except for 8421.12.10 and 8421.91.10 (see GROUP II)

8422 *

Dishwashers; machinery and devices for cleaning or drying bottles or other containers; machinery and devices for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery and devices for capping bottles, jars, tubes and similar containers; other machinery and devices for packing or wrapping goods (including machinery and devices for packaging heat-shrink wrapping); machinery and devices for aerating beverages, except for 8422.11.00 and 8422.90.10 (see GROUP II)

8423 * Weighing apparatus and instruments, including scales and balances to verify machined parts (manufactured *) excluding balances that are sensitive to weights no higher than 5cg; weights for all scales, except for 8423.10.00, 8423.90.10 and 8423.90.21 (see GROUP II)

8424 *

Mechanical and manual devices for projecting, dispersing or spraying liquids or powders; fire extinguishers, charged or not; spray guns and similar devices; machinery and devices for sand blasting, steam jet machines and similar jet-like devices, except for 8424.10.00, 8424.81.11, 8424.89.10 and 8424.90.10 (see GROUP II)

8425 * Pulley tackle and hoists; winches and capstans; jacks, except for 8425.42.00 and 8425.49.10 (see GROUP II)

8426 Derricks; cranes; gantries or unloading gantries, bridge cranes, straddle carriers and crane cars

8427 Forklifts; other vehicles for cargo handling and the like, equipped with lifting devices

8428 Other machinery and devices for lifting, handling, loading or unloading

8429

Bulldozers, angle dozers, graders, scrapers, mechanical diggers, excavators, shovel loaders, tamping machines and road rollers, self-propelled

8430

Other machinery and devices for leveling, tamping, compacting, extracting or boring, for earth, minerals or ores; piling and start-stakes; snowplows

8431 * Parts suitable for use solely or principally with machinery and devices listed under 8425 to 8430, except for 8431.10.10 (see GROUP II)



GROUP I

MCN DESCRIPTION

8432 Machinery and devices for agricultural, horticultural or forestry use, preparation or tilling or cultivation; rolls for lawns, or sports fields

8433 *

Machinery and devices for harvesting or threshing machinery, including straw or fodder balers; lawnmowers and harvesters; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, except for those listed under 8433.90.10 and 8433.1 (see GROUP II)

8434 Milking machines, and machinery and devices for the dairy industry

8435 Presses, crushers and similar machinery used to manufacture wine, cider, fruit juices or similar beverages

8436

Other machinery and devices for agricultural, horticultural, forestry, raising poultry or bee- keeping, including germinators fitted with mechanical or thermal features, as well as incubators and brooders for poultry

8437

Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables; machinery and devices for milling or treating cereals or dried leguminous vegetables, except for those used on farms

8438 Machinery and devices not specified or included elsewhere in this chapter, for the preparation or manufacture of food or drink, except for machinery and devices for extracting or preparing oils or fixed vegetable fats or oils or animal fats

8439 Machinery and devices for making pulp from fibrous cellulosic material or for making or finishing paper or paperboard

8440 Machinery and devices for book-binding, including book-sewing machines

8441 Other machinery and devices for producing paper or paperboard pulp, including all kinds of cutting machines

8442

Machinery, devices and material (except for machine tools listed under 8456 to 8465), to forge or compose typefaces or for preparing or making plates, cylinders or other printing components; printing type, blocks, plates, cylinders or other printing components; lithographic stones, plates, cylinders, prepared for printing

8443

Machinery and devices for printing using printing type, blocks, plates, cylinders and other printing components listed under 8442; inkjet printers, except for those listed under 84.71; auxiliary machines for printing

8444 Machinery and devices for extruding, drawing, texturing or cutting man-made textile materials

8445

Machines for preparing textile fibers; machinery for spinning, folding or twisting textile and other machinery and devices for producing yarn; winding or reeling textile articles and machines for preparing textile yarns for use in the machines listed under 8446 or 8447

8446 Weaving machines



GROUP I

MCN DESCRIPTION

8447 *

Knitting machines, stitch-bonding machines ("couture knitting"), machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net; machines for tufting, except for 8447.20.10 (see GROUP II)

8448 * Auxiliary machinery and devices for machines listed under 8444, 8445, 8446 or 8447; parts and accessories suitable for use solely or principally with the machines listed herein or under 8444, 8445, 8446 or 8447, except for 8448.59.21 (see GROUP II)

8449 Machinery and devices for producing or finishing felt or nonwovens in certain pieces or shapes; blocks for making hats (millinery blocks)

8450 * Washing machines, with drying features, except for 8450.1 and 8450.90.90 (see GROUP II)

8451 *

Machinery and devices (except for machines listed under 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or saturating textile yarns, fabrics or pieces made from textiles and machines for applying the base fabric or other support used to produce floor coverings, such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics, except for 8451.21.00, 8451.30.91 and 8451.90.10 (see GROUP II)

8452 *

Sewing machines, except for book-sewing listed under 84.40; furniture, bases and covers specially designed for sewing machines; needles for sewing machines, except for 8452.10.00, 8452.90.20 and 8452.90.8 (see GROUP II)

8453

Machinery and devices for preparing, tanning or treating hides, pelts or leather or for making or repairing footwear or other articles made of leather or pelt, except for sewing machines

8454 Converters, crucibles or casting ladles, ingot molds and casting (molding) for metallurgy or casting machines

8455 Metal-rolling mills and respective cylinders

8456

Machine tools that remove any material, using a laser or other light or photon, ultrasonic, electro-discharge, electrochemical processes, electron beam, ionic-beam or plasma jet

8457 Machining centers, single and multi-station transfer machines for working metal

8458 Lathes for metal

8459

Machine tools for drilling, milling, threading or tapping internal and external metals by removing metal, except for lathes (including turning centers) listed under 8458

8460 Machine tools for deburring, sharpening, grinding, lapping, polishing or finishing metal or cermets ("cermets") using grinding stones, abrasives or polishing products, except for machines for cutting or finishing gears listed under 84.61

8461 Machine tools for planing, shaping, slotting machine tools, broaching, grinding or gear finishing, sawing, cutting-off and other machine tools by removing metal or cermets, not specified or included in other listings



GROUP I

MCN DESCRIPTION

8462 Machine tools for forging, hammers, pestles and forging hammers, for working metal; machine tools for bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above

8463 Other machine tools for working metal or cermets, without removing material

8464 Machine tools for working stone, ceramics, concrete, fiber cement or similar mineral materials or for working with cold glass

8465 Machine tools for working wood, cork, bone, hardened rubber, hard plastics or similar hard materials

8466

Parts and accessories suitable for use solely or principally with the machines listed under 8456 to 8465, including braces and tool holders, dies for automatic opening, dividing devices and other special attachments for machine tools; tool holders for hand tools of all kinds

8467 Pneumatic, hydraulic or motorized (electric or nonelectric) tools for manual use

8468 Machinery and devices for soldering, even cutting, except for those listed under 8515; gas- operated machinery and devices for surface tempering

8469.00.10 Word-processing machines

8470 *

Calculators and pocket-sized devices for recording, reproducing and displaying information, with calculating functions; accounting machines, postage-franking, ticket-issuing and similar machines, with inbuilt calculating features; cash registers, except for 8470.10.00, 8470.30.00 and 8470.2 (see GROUP II)

8471 Automatic data processing machines and respective units; magnetic or optical readers, machines for codifying data, and machines for processing such data, not specified or included in other listings

8472 *

Other office machinery and devices [e.g. hectographic or stencil duplicators, addressing machines, automatic banknote dispensers, machines for selecting, counting or packing paper money, mechanical pencil sharpeners, perforators or staplers, except for 8472.90.40 (see GROUP II)

8473 *

Parts and accessories (except for cases, covers and similar items) suitable for use solely or principally with machinery and devices listed under 8469 to 8472, except for 8473.10.90, 8473.21.00 and 8473.29.20 (see GROUP II)

8474

Machinery and devices for sorting, screening, separating, washing, crushing, grinding, mixing or kneading soil, stone, minerals or other solid mineral (including powder or paste) substances; machines for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plaster or other mineral products in powder or paste form; machines to make sand molds for casting

8475

Machines for assembling electric bulbs, tubes or valves, electrical or electronic, or flash light bulbs flash, encased in glass; machines for producing or hot working glass or glassware



GROUP I

MCN DESCRIPTION 8476 Vending machines, including money-changing machines

8477

Machinery and devices for working with rubber or plastics or for producing goods from these materials, not specified or included in listings in this chapter

8478 Machinery and devices for preparing or transforming tobacco, not specified or included in listings in this chapter

8479 Machinery and mechanical devices with specific features, not specified or included in listings in this chapter

8480

Boxes for metal foundry; bottom plates for molds; templates for molds; molds for metal (except for ingot molds), metal carbides, glass, mineral materials, rubber or plastics

8481 *

Taps, faucets (including pressure-reducing and thermostatic taps) and similar devices for pipes, boilers, tanks, sinks or similar items, except for 8481.80.1, 8481.80.31, 8481.80.91 and 8481.90.10 (see GROUP II)

8482.10.90 Other ball bearings

8482.20.90 Other tapered roller bearings

8482.50.90 Other cylindrical roller bearings

8483

Transmission trees (shafts) [including trees eccentrics (cams) and crankshaft (crankshaft)] and cranks; bearings, and bronze; gears and gearing; ball or roller screws; reducers, multipliers, gear boxes and other speed changers, including torque converters (binary); flywheels and pulleys, including pulley blocks; clutches and shaft couplings including universal joints

8484

Gaskets; sets or assortments of different compositions together, in pouches, envelopes or similar packaging; gaskets, mechanical seals

8486 Machinery and devices used solely or principally to produce spheres (boules) or wafers, semiconductor devices, integrated electronic circuits or devices for flat panel displays; machinery and devices specified in Note 9 C) of this Chapter; parts and accessories.

8487 Parts of machinery or devices, not specified or included in listings in this chapter, not containing electrical connectors, electrically separated parts, coils, contacts or other elements with electrical characteristics.

8501 * Motors and generators, electric, excluding generating sets, except for 8501.10.19, 8501.10.2, 8501.10.30, 8501.31 and 8501.40.1 (see GROUP II)

8502 Electrical generating sets and rotary converters

8503 * Parts suitable for use solely or principally with machines listed under 8501 or 8502, except for 8503.00.10 (see GROUP II)

8504.2 Liquid dielectric transformers

8504.31.91 Horizontal output transformer ("fly back"), with the voltage output higher than 18kV and horizontal scanning frequency higher than or equal to 32KHz



GROUP I

MCN DESCRIPTION

8504.33.00 Transformers with power higher than 16KVA but no higher than 500KVA

8504.34.00 Transformers with power higher than 500KVA

8504.40.21 Crystal tension rectifiers (semiconductors)

8504.40.30 DC converters

8504.40.40 Equipment for an uninterruptible power supply (UPS or "no break")

8504.40.50 Electronic frequency converters for variable speed electric motors

8504.40.90

Static converters, except for battery chargers, rectifiers, converters of continuous current, uninterruptible power supply equipment supply (UPS or "no break"), electronic frequency converters for motorcycle variable speed

8504.90.30 Parts of transformers listed under 8504.21, 8504.22, 8504.23, 8504.33 or 8504.34

8504.90.40 Parts of static converters, except for battery chargers and rectifiers

8505.20 Couplings, clutches, speed variables and brakes, electromagnetic

8505.90.80 Drill chucks and similar items, magnetic or electromagnetic devices, for fastening

8505.90.90 Parts of electromagnets; drill chucks and similar items, magnetic or electromagnetic devices, for fastening

8507.10 Electric accumulators, including separators, either rectangular or square, made of lead, used for starting piston engines

8507.20 Other lead-acid accumulators

8507.30.19 Other nickel-cadmium accumulators weighing less than or equal to 2,500 kg, except those with a capacity lower than or equal to 15Ah

8508.19.00 Other vacuum cleaners with built-in electric motors

8508.60.00 Other vacuum cleaners

8510.20.00 Electric hair clippers or shears

8510.90.90 Parts of electric hair clippers or shears and shaving devices, with an electric motor, except for shaving and clipping devices

8511

Appliances and electrical ignition devices or spark or compression ignition (e.g. magnets, magneto-dynamos, ignition coils, spark plugs or heating, starter motors); generators (dynamos and alternators, for example) and cut-outs used in those engines

8512 *

Electrical lighting or signage (except for items listed under 8539), windscreen wipers, defrosters and electric demisters, used for cycles or motor vehicles, except for 8512.10.00 (see GROUP II)

8514

Industrial or laboratory electric furnaces, including those functioning by induction or dielectric loss; other industrial or laboratory equipment for the heat treatment of materials through by induction or dielectric loss

8515 Machinery and devices for soldering (even cutting) electric (including those electrically or gas heated), by laser or other light or photon, ultrasonic, electron beam, magnetic pulse or jet plasma; electric machinery and devices for hot spraying of metals or cermets



GROUP I

MCN DESCRIPTION

8517 *

Portable handset and wireless telecommunication apparatus for carrier-current or digital systems; videophones, except for 8517.11.00, 8517.18.10, 8517.18.9, 8517.62.99 and 8517.70.29 (see GROUP II)

8519.81.20 Sound recorders for aircraft cabins

8521.10.10 Recorder players, with no tuner

8521.10.90 Other video recording or playback devices for magnetic tapes wider than or equal to 19.05 mm (¾ ")

8521.90.10 Recorder players and image and sound editors on disk via magnetic, optical or optomagnético

8523.29.11 Magnetic media used in hard disk drives

8525 *

Receivers or a sound recording or reproducing devices; television cameras; photographic/video cameras, and other video cameras; digital photographic cameras, except for 8525.80.19 and 8525.80.29 (see GROUP II)

8526 * Radiowave and radar devices, radio navigational devices and remote control radio devices, except for 8526.92.00 (see GROUP II)

8527.21.00

Receivers for radio broadcasting, with external sources, used in motor vehicles

8527.29.00 Other receivers for radio broadcasting

8528.41.10 Monochrome monitors (screens) with cathode ray tubes used for data processing

8528.41.20 Polychromatic monitors (screens) with cathode ray tubes used for data processing

8528.49.21 Monitors (screens) with under scanning features as well as horizontal and vertical time delay (H/V delay or pulse cross) features

8528.51.10 Monochrome monitors (screens) for data processing

8528.51.20 Polychromatic monitors for data processing

8528.61.00 Projectors solely or mainly used in an automatic data processing system listed under 8471

8528.69.10 Projectors with DMD (Digital Micromirror Device) technology

8528.71.11

Receivers without modulated output radio frequency (RF) on channels 3 or 4, with balanced audio outputs with 600 Ohms impedance, suitable for mounting on racks and with video output with BNC connector

8529 * Parts suitable for use solely or mainly with devices listed under 8525 to 8528, except for 8529.10 and 8529.90.90 (see GROUP II)

8530 Electrical signaling (excluding messaging) devices, security, command and control equipment for railways or similar, on land or water, to parking facilities or areas, port installations or airfields (other than those listed under 86.08)

8531.20.00 Indicator panels with liquid crystal devices (ICD) or light emitting diodes (LED)




8532.21.11 Other fixed capacitors with a tantalum surface suitable for mounting (SMD - "surface mounted device"), with an insulation voltage lower than or equal to 125V

8532.21.19 Other fixed capacitors with a tantalum surface suitable for mounting (SMD - "surface mounted device"), except those with an insulation voltage lower than or equal to 125V

8532.23.10 Other fixed single-layer ceramic dielectric capacitors suitable for surface mounting (SMD - "surface mounted device")

8532.24.10 Other fixed multilayer ceramic dielectric capacitors suitable for surface mounting (SMD - "surface mounted device")

8532.25.10 Other fixed paper or plastic dielectric capacitors suitable for surface mounting (SMD - "surface mounted device")

8532.29.10 Other fixed capacitors suitable for surface mounting (SMD - "surface mounted device"), except for those that are tantalum, aluminum electrolytic, ceramic dielectric, single layer, ceramic dielectric, multilayer dielectric or paper or plastics

8532.30.10 Variable or adjustable capacitors suitable for surface mounting (SMD - "surface mounted device")

8533.21.20 Fixed resistors, except those made of carbon, multi or single layer, suitable for surface mounting (SMD - "surface mounted device")

8534.00 Printed circuit boards

8535

Apparatus for switching, protection, shunt connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors voltage (surge suppressors), plugs and other connectors, junction boxes), for a voltage exceeding 1000 V

8536.50 Other switches, toggles and levers

8536.90.40 Connectors for PCB

8537.10.1 Computerized numerical control (CNC)

8537.10.20 Programmable controllers

8537.10.30 Controllers for power demand

8537.20.10 Gas-insulated substations (GIS - Gas-Insulated Switchgear or HIS - Highly Integrated Switchgear), for voltage higher than 52 kV

8538.90.10 Printed and mounted circuit boards with electrical or electronic components

8540.20.20 X-ray converter and intensifier tubes

8540.40.00

Monochrome graphic data display tubes; color (polychrome) graphic data display tubes, with a phosphor screen with center-to-center spacing smaller than 0.4 mm

8541

Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, including photovoltaic cells assembled in modules or on to panels; light-emitting diodes; mounted piezoelectric crystals

8542 Integrated electronic circuit boards and microassemblies

8543 *

Electrical machinery and devices, with individual functions, not specified or included elsewhere in this chapter, except for 8543.70.20 and 8543.90.10 (see GROUP II)




8544.30.00 Cables for sparkplugs and other cables used in any vehicle

8544.60.00 Other electric conductors for voltage higher than 1,000 V

8544.70 Optical fiber cables

86 Vehicles and equipment for railways or similar, and their respective parts; mechanical (including electromechanical) traffic signaling devices for communication

8701 Tractors (except for car-tractors listed under 8709)

8702 Motor vehicles to transport 10 people or more, including the driver.

8704 Motor vehicles to transport goods

8705 *

Motor vehicles for special uses (e.g. ambulances, crane cars, fire fighting vehicles, concrete- mixer trucks, sweepers, vehicles to spread (spreaders) and mobile workshops, mobile radiological units), except for those mainly designed to transport people or goods, except for 8705.90.90 (see group III)

8706 * Chassis fitted with engines for the motor vehicles listed under 8701 to 8705, except for 8706.00.90 (see group III)

8707 Bodies for motor vehicles listed under 8701 to 8705, including cabs

8708 Parts and accessories for motor vehicles listed under 8701 to 8705

8709

Motor vehicles with no lifting device used in factories, warehouses, dock areas or airports for freight transport over short distances; tractors used on railway station platforms; and their respective parts

8716 Trailers and semi-trailers, trailers for other vehicles, other non-mechanically propelled; parts

8802 Other aircraft (for example, helicopters, airplanes); spacecraft (including satellites) and spacecraft launch vehicles and suborbital vehicles

8803 Parts of vehicles and devices listed under 8801 or 8802

8805

Apparatus and devices for launching aircraft; apparatus and devices for landing aircraft on aircraft carriers and similar apparatus and devices; land-based flight training devices; and their respective parts

8901 Ocean liners, cruise ships, ferry boats, cargo ships, barges and similar vessels to transport people or goods

8902.00 Fishing boats; factory ships and other vessels for processing or preserving fishing products

8904.00.00 Tugs and pusher craft

8905

Boat lighthouses, suction dredger, backhoe dredgers, floating cranes and other vessels in which navigability is secondary to the main function; docks or floating docks; floating or submersible platforms for drilling or exploring

8906 * Other vessels, including warships and lifeboats, except for row boats and 8906.10.00 (see group III)

8907 Other floating structures (for example, barges, rafts, tanks, cofferdams, mooring buoys, buoys and beacons and similar)



GROUP I MCN DESCRIPTION 9001.10 Optical fibers, optical fiber bundles and cables

9002.11.20 Lens approximation ("zoom") for television cameras for 20 X or more

9005.80.00 Telescopes, including astronomy optical telescopes, and respective mountings; other astronomy instruments and respective mountings, except for radio-astronomy

9005.90.90 Parts and accessories (including mountings) for other instruments

9006.10 Photographic cameras used to prepare printing plates or cylinders

9006.30.00

Specially designed photographic equipment for underwater or aerial photography, for medical examination of internal organs, for forensic laboratories or legal investigation

9007 Movie cameras and projectors, even with recording devices or embedded sound reproduction features

9010 * Apparatus and equipment used in photographic or cinematographic laboratories, not specified or included elsewhere in this chapter; negatoscopes; projection screens, except for 9010.50.90, 9010.60.00 and 9010.90.90 (see GROUP II)

9011 Optical microscopes, including those for photomicrography, cinemicrography or microprojection

9012 Microscopes (except optical); diffraction

9013 *

Liquid crystal devices that are not part of items more specifically listed elsewhere; "Lasers" except laser diodes; other optical apparatus and instruments, not specified or included elsewhere in this chapter, except for 9013.80.90 (see GROUP II) and 9013.10.10 and 9013.90.00 (see group III)

9014 Compasses, including needles for compasses, other navigational instruments and devices

9015

Instruments and devices used in geodesy, surveying, leveling, photogrammetry, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments, except for compasses; rangefinders

9016.00 Scales sensitive to weights equal to or less than 5CG with or without counterweights

9017.10.10 Tables and automatic drafting machines

9017.90.10 Parts and accessories for tables or automatic drafting machines

9018 *

Instruments and devices used in medical, surgical, dental or veterinary sciences, including scintigraphic devices, and other electro-medical apparatus and sight-testing apparatus, except for 9018.3, 9018.49.1, 9018.49.20, 9018.49.99 (in part), 9018.90 .2, 9018.90.92, 9018.90.95 and 9018.90.99 (see GROUP II)

9018.49.99 Dentist chairs fitted with dental devices. Other products with this MCN code are eligible in group II

9019

Mechano-therapy devices; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, respiratory resuscitation and other respiratory therapy devices

9022

X-ray equipment and devices that use alpha, beta or gamma rays, not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy equipment, x-ray tubes and other generator devices



GROUP I

MCN DESCRIPTION

9024

Machinery and devices for testing the hardness, compression, elasticity or other mechanical properties of materials (e.g., metals, wood, textiles, paper, plastics)

9026.10.11 Electronic transmitter meters, operating through the principle of electromagnetic induction

9027

Instruments and devices for physical or chemical analysis [e.g. polarimeters, refractometers, spectrometers, gas or smoke (fumes*) meters]; instruments and apparatus for measuring or checking viscosity, porosity, the dilation or superficial tension or similar, or heat, sound or light-voltage meters; microtomes

9028.10.1 Electronic compressed natural gas meters

9028.30.11 Digital single-phase electricity meters

9028.30.21 Digital dual-phase electricity meters

9028.30.31 Digital tri-phase electricity meters

9029.10.10 Revolution (lap) counters, production counters or office time clocks

9030

Oscilloscopes, spectrum analyzers and other instruments and apparatus for measuring or checking electrical currents; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic rays or other ionizing radiation

9031 Measuring or checking instruments devices and machinery, not specified or included elsewhere in this chapter; profile projectors

9032 * Automatic regulating or controlling instruments and apparatus, except for 9032.81.00 (see GROUP II)

9402 Medical, surgical, dental or veterinary furniture (for example, operating tables, examination tables, hospital beds with mechanical fittings, dentist chairs); barber chairs and similar, with positioning and lifting features; and their respective parts

9405.10.10 Escialíticas bulbs (lights without shade, used in medical, surgical, dental work)

9406 Prefabricated buildings

Note.: For codes marked with asterisks (*) in the "MCN" column of this list, there are exceptions for support in some listed items. These

exceptions are explained in bold in the corresponding "Description" column.

Complete descriptions and classifications of goods in Mercosur Common Nomenclature - MCN can be checked on the Ministry of Industry and Trade webpage (www.mdic.gov.br). The table for the Common External Tariff was used as reference. It was duly updated up to CAMEX Resolution Nº. 90 of

10.29.2013.



SUBGROUP I – A MCN DESCRIPTION

8402*

Steam boilers (steam generators), except for central heating boilers designed to produce hot water and low pressure steam; boilers known as ”superheated water”, except for 8402.90.00

8403 * Central heating boilers, except for 8403.10.10 and 8403.90.00

8404*

Auxiliary plant for use with boilers of positions 8402 or 8403 (for example: economizers, superheater, pipe cleaners or recovery of gas); condensers for steam engines, except for 8404.90.10 and 8404.90.90 8406 * Steam turbines, except for 8406.90

8410 * Hydraulic turbines, water wheels, and regulators, except for 8410.90.00

8411.8 Gas turbines

8419.31.00 Dryers for agricultural products

8419.81.90

Other instruments and devices for the treatment of materials by a process involving temperature change; non-electric water heaters , heating instantaneous or accumulation

8421.11 Creamers

8422*

Dishwashers; machinery and instruments for cleaning or drying bottles or other containers; machinery and instruments for filling, closing , sealing or labeling bottles , boxes, cans, bags or other containers; machinery and instruments for capsuling bottles, jars , tubes and similar containers; other machinery and instruments for packing or wrapping goods (including machinery and instruments for packing with pellicle retractable term); machinery and instruments for aerating beverages, except for 8422.11.00, 8422.90.10, 8422.90.90

8424.81.19 Non-manual mechanical apparatus for projecting, dispersing or spraying fungicides, insecticides and other products to combat pests

8424.81.2 Sprinklers and irrigation systems 8424.81.90 Other instruments for agriculture or horticulture

8432 *

Machinery and devices for agricultural, horticultural or forestry use, preparation or tillage or cultivation; rollers for lawns or sports fields, except for 8432.90.00

8433.20 Mowers, including cutter bars for tractor mounting

8433.30.00 Machinery and devices to harvest and chaff hay (chaffer machines)

8433.40.00 Straw or fodder baling machines, including hay trolleys-balers

8433.5 Machinery and devices for harvesting; machinery and devices for threshing

8433.60 Machines for cleaning, sorting or grading eggs, fruit or other agricultural products

8434 * Milking machines and machinery and devices for the dairy industry, except for 8434.90.00

8435 * Presses, crushers and similar machinery and devices used to produce wine, cider, fruit juices or similar beverages, except for 8435.90.00



SUBGROUP I – A

MCN DESCRIPTION

8436 *

Machinery and devices for agricultural, horticultural, forestry, raising poultry or bee- keeping, including germinators fitted with mechanical or thermal apparatus and incubators and brooders for raising poultry, except for 8436.9

8437 *

Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables; machinery and devices for milling or treating cereals or dried leguminous vegetables, except for those used on farms, except for 8437.90.00

8438* Machinery and devices not specified or included elsewhere in this chapter, for industrial preparation or production of food or drink, except for 8438.90.00 ,

8456 Machine tools that remove any material, using laser or other light or photon, with ultrasonic, electro-discharge, electrochemical processes, electron beam, ionic-beam or plasma jets

8457 Machining centers, single station machines, and multi-station transfer machines for working metal

8458 Lathes for metal

8459

Machine tools for drilling, milling, threading or tapping metal internally and externally by removing metal, except for lathes (including lathing centers) listed under 8458

8460 Machine tools for deburring, sharpening, grinding, lapping, polishing or otherwise finishing metal or cermets using grinding stones, abrasives or polishing products, except for machinery for cutting or gear finishing listed under 84.61

8461 Machine tools for planing, shaping, slotting machine tools, broaching, grinding or gear finishing, sawing, cutting-off and other machine tools that remove metal or cermets, not specified or included in other listings

8462 Machine tools for forging, hammers, pestles and forging hammers for working metal; machine tools for bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above

8463 Other machine tools for working metal or cermets, that do not remove material

8464 Machine tools for working stone, ceramics, concrete, cement or similar mineral materials or for cold working glass

8465 Machine tools for working wood, cork, bone, hardened rubber, hardened plastics or similarly hardened materials

8467* Pneumatic tools , hydraulic or with motor (electric or non-electric) incorporated, manual use, except 8467.9

8468* Machinery and devices for soldering, even cutting, except those of heading 85.15; machinery and gas appliances, for surface tempering, except for 8468.90 8478*

Machinery and instruments for preparing or making up tobacco , not specified or included elsewhere positions in this chapter, except for 8478.90.00

8479.20.00 Machinery and instruments for the extraction or preparation of oils or fats vegetable fixed or oils or fats animals

8479.30.00 Presses to manufacture particle board, made of wood or other wood-like materials and other machinery and devices for treating wood or cork



SUBGROUP I – A

MCN DESCRIPTION 8480 Casting boxes; fund boards for molds; models for molds; molds for metals

(except ingot molds), metal carbides, glass, mineral materials, plastics or rubber

8486.20.00

Machinery and instruments for the manufacture of semiconductor devices or electronics circuits integrated

8486.30.00

Machinery and instruments for the manufacture of flat panel display devices

8501.32.20

Generators power exceeding 750 W, but not exceeding 75 kW

8501.33.20

Generators power exceeding 75 kW, but not exceeding 375 kW

8501.34.20

Generators power exceeding 375 kW

8501.6 Generators alternating current(alternators) 8502 Electric generator sets and rotary converters

8504.2 Liquid dielectric transformers

8504.31.91 Horizontal output transformers with output higher than 18kV and a horizontal frequency scan higher than or equal to 32KHz

8504.33.00 Transformers that exceed 16KVA but not 500KVA

8504.34.00 Transformers that exceed 500KVA

8504.40 DC converters, except for 8504.40.10, 8504.40.22, 8504.40.29 e 8504.40.60 8515* Machinery and instruments for soldering (even cutting) electrical ( including heated gas

electrically), laser or other light or photon beam processes, the ultrasound, electron beams, magnetic pulse or plasma jet; electrical machinery and instruments for hot spraying of metals or cermets, except for 8515.90.00 86* Vehicles and material for railways, tramways , and parts thereof; mechanical appliances (including electromechanical) signaling equipment of all kinds, except for 8607 and 8609

8701.10.00 Agricultural tractors 8701.90.90 Other tractors (excluding cars - tractors of position 8709)

8716.10.00 Trailers and semi-trailers for housing or camping, of the type trailer

8716.3 Other trailers and semi-trailers for transport of goods



GROUP II MCN DESCRIPTION

02 * Edible meats and offal, except for 0208.30.00, 0208.40.00, 0208.50.00, 0208.60.00, 0208.90.00 and 0210.9

03 * Fish and crustaceans, mollusks and other aquatic invertebrates, except for 0301

04 Milk and dairy products; bird eggs; natural honey; edible products originating from animals, not elsewhere specified or included in other chapters

0511 * Products originating from animals, not elsewhere specified or included, except for 0511.91.90, 0511.99.10 and 0511.99.9

06 Live plants and other flora and fauna products

07 Edible vegetables, plant roots and root vegetables

08 Fruits; citrus fruit peels and melons

09 * Coffee, tea, maté and spices, except for 0901.1

1302.19 Vegetable juices and extracts

1507.90.1 Refined soybean oil

1509 Olive oil

1512.19.11 Refined sunflower oil

1512.29.10 Refined cottonseed oil

1514.19.10 Refined oils from turnips (rutabaga) or rapeseed (colza) with low amounts of erucic acid

1514.99.10 Other refined oils from turnips or rapeseed with low amounts of erucic acid

1515.29.10 Refined corn oil

1515.90.22 Refined tung oil

1517 Margarine; edible mixtures or preparations made from animal fats or vegetable oils

1521 Vegetable waxes

16 Preparations using meats, fish or crustaceans, mollusks or other aquatic invertebrates

1702.90.00 Other sugars, including inverted sugar, and other sugars and syrups containing 50% fructose, in the dry state when weighed

1704 Products for pastry cooking, except for cocoa (including white chocolate)

18 * Cocoa and cocoa preparations, except for 1801 and 1802

19 Preparations using cereals, flour, starch or milk; pastry cooking products

20 * Preparations using vegetables, fruits, nuts or other parts of plants, except for 2001 and 2009.1

21 * Assorted food preparations, except for 2102

22 * Beverages, alcoholic liquids and vinegar, except for 2207.10.10, 2207.10.90, 2207.20.11 and 2207.20.19



GROUP II

MCN DESCRIPTION 2309 Preparations used in pet food

2402.10.00 Cigars and cigarillos containing tobacco (tobacco)

2514.00.00 Slate, trimmed or merely cut by saw or other means into blocks or tiles both square or rectangular shapes

2515.12 and 2515.20.00

Marble, travertine, granite and other Belgian calcareous stone for monuments or construction, cut by saw or other means into blocks or tiles, both square or rectangular shapes

2516.12.00 Granite merely cut by saw or other means into blocks or tiles both square or rectangular shapes

2519.90 Fused magnesia, dead-burned magnesia, magnesium oxide others

2520.20.10 Ground gypsum, fit for dental use

2710.12.30 Mineral-based turpentine (white spirit)

2815 to 2825 Inorganic chemical products; organic or inorganic compounds of precious metals, radioactive elements, rare soil metals or isotopes

2827 Chlorides, oxides and hydroxides; bromides and bromide oxides; iodides and iodide oxides 2829 Chlorates and perchlorates; bromate and perbromatos; iodates and periodates

2915.70.20 Stearic acid

2917.32.00 Dioctyl ortoftalato

2922.41.90 Other esters and lysine salts

2922.42.20 Sodium salts from glutamic acid (MSG)

2923.20.00 Lecithins and other phosphoaminolipids

2931.90.32 Glyphosate and salt from monoisopropylamine

2931.90.37 Phosphonomethyliminodiacetic acid; trimethylphosphonic acid

2934.99.22 Zidovudine (AZT) 2934.99.27 Stavudine

2934.99.93 Lamivudine

2936 and 2937 Pro-vitamins, vitamins and hormones

2938 Heterosídios, natural or reproduced by synthesis, and their salts, ethers, esters and other derivatives

2941 Antibiotics

30 Pharmaceuticals

32 Tanning or dyeing extracts; tannin and its derivatives; pigments and other coloring materials; paints and varnishes; mastics; inks

33 Essential oils and resinoids; prepared perfumery or toiletries and cosmetic preparations

34 Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, maintenance and cleaning, candles and similar items, modeling pastes, dental waxes for dentists, and gypsum-based dental composition

35 Albuminoidal substances; products based on starches or modified starches; glues; enzymes

37 Photographic or cinematographic products



GROUP II

MCN DESCRIPTION

3801 to 3824 * Miscellaneous chemical industry products, except for 3801, 3802, 3803.00.00, 3815.12.10 and 3804 (see group I)

39 Plastics and plastic items

4001 Natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums, in primary forms or in panels, sheets or strips

4002

Synthetic rubber and artificial rubber derived from oils, in primary forms or in panels, sheets or strips; a mix of items listed under 40.01 with products in this listing, in primary forms or in panels, sheets or strips

4003 Reclaimed rubber in primary forms or in panels, sheets or strips

4005 Unvulcanized compound rubber, in primary forms or in panels, sheets or strip

4006 Other forms (for example, rods, tubes and shapes) and items (for example, discs and rings/washers), made of unvulcanized rubber

4007 Wires and cords made of vulcanized rubber

4008 Panels, sheets, strips, rods and shapes made of vulcanised rubber

4009 Tubes of vulcanized but unhardened rubber, with or without respective fittings (for example, joints, elbows, flanges, sleeves)

4010 * Conveyor belts or belting, made of vulcanized rubber, except for 4010.3 (see GROUP I)

4011 * New pneumatic tires, made of rubber, except for 4011.20, 4011.30, 4011.61.00 to 4011.69.10, 4011.92.10 to 4011.99.10 (see GROUP I) 4013 Tube tubes made of rubber

4014 Toiletries or pharmaceutical items (including teats/pacifiers), made of vulcanised rubber, with or without parts made of hardened rubber

4015 Apparel and clothing accessories (including gloves, mittens and similar goods), made of vulcanised rubber, for all purposes

4016 Other items made of vulcanized rubber

4104.4 Dry hairless hides and pelts ("crust") from bovines (including buffalo) or horse and horse- like animals, cut into splits or not, but not prepared in any other way

4105.30 Dry hides and pelts ("crust") from sheep without wool, cut into splits or not, but not prepared in any other way

4106.22 Dry hairless hides and pelts ("crust") from goats, cut into splits or not, but not prepared in any other way

4106.32 Dry hairless hides and skins ("crust") from swine, cut into splits or not, but not prepared in any other way

4107

Leather prepared after tanning or crusting and parchment-dressed hairless hides and skins of bovine (including buffalo) or horse or horse-like animals, cut into splits or not

4112 Leather prepared after tanning or crusting and leather and parchment-dressed sheared hides and skins of sheep, cut into splits or not

4113.10 Leather prepared after tanning or crusting and parchment-dressed hairless hides and skins of goats or kid goats, cut into splits or not



GROUP II

MCN DESCRIPTION

4113.20 Leather prepared after tanning or crusting and parchment-dressed hairless hides and skins of swine, cut into splits or not

4114 Napped hides and skins (including combination suede); leather and patent laminated leather; metallised leather

4115.10.00 Reconstituted leather with a basis of leather or leather fiber, in panels, sheets or strips, rolled or not

42 Leather items; saddlery and harness; travel items, handbags and similar items; items using intestine

44 * Wood, vegetal charcoal and wood items, except for 4401 to 4406, 4407.2, 4407.9, 4408.3, 4409.2 and 4408.90

45 Cork and items made of cork

46 Items made of straw and basket weaving

48 Paper and paperboard; Items made of pulp, paper or paperboard

49 Books, newspapers, pictures and other products from the printing industry; text manuscripts, typescripts and plans

50 * Silk, except for 5001 to 5003

51 * Wool and fine or coarse animal hair; horsehair yarn and woven fabric, except for 5101 to 5105

52 * Cotton, except for 5201 to 5203

53 * Other vegetable textile fibers; paper yarn and yarn-woven paper, except for 5301 to 5305 54 Man-made filaments

55 * Synthetic or artificial staple fibers, except for 5505

56 Folders ("ouates"), felt and nonwovens; special yarns; twine, cordage, ropes and cables

57 Rugs and other floor coverings made of textile materials

58 Special fabrics; tufted fabrics; lace; tapestries; trimmings/stitching; embroidery

59 Impregnated, coated, covered or laminated fabrics; items for technical uses of textiles

60 Knitted fabrics

61 Knitted or crocheted apparel and accessories

62 Apparel and accessories, not knitted or crocheted

63 * Other manufactured textile items; assortments; items made of textile materials, footwear, hats and headwear; remnants, except for 6309.00

64 Footwear, gaiters and similar items, and respective parts

65 Hats and headwear and respective parts

66 Umbrellas, parasols, sun-umbrellas, walking sticks, seat-sticks, whips, and respective parts

67 * Prepared feathers and down, and items made of them; artificial flowers; items made of human hair, except for 6701

6801 to 6815 * Items made of stone, plaster, cement, asbestos, mica or similar materials, except for 6802.91, 6802.92, 6802.93.10, 6802.99, 6813.81.10 and 6813.89.10

69 * Ceramic products, except for 6909.12.20 and 6909.19.20 (see GROUP I)

7002 to 7020 * Glass and glassware, except for 7007.11.00, 7007.21.00 and 7009.10.00 (see GROUP I)



GROUP II

MCN DESCRIPTION

71 *

Natural or cultured pearls, precious or semi-precious stones and similar stones, precious metals, leaf-coated metals or those dipped in precious metals, and products with precious metals, except for 7101 to 7112

72 * Cast iron and steel, except for 7201 to 7207 and 7224

73 *

Works made of cast iron or steel, except for 7304.1, 7304.2, 7305.1, 7305.20.00, 7306.1, 7306.2, 7307, 7308.10.00, 7308.20.00, 7309.00, 7310.10.10, 7310.29.20, 7311.00.00, 7322.90. 10, 7325.91.00, 7326.11.00 and 7326.90.10 (see GROUP I)

74 * Copper and copper products, except for 7401 to 7406

75 * Nickel and nickel products, except for 7501 to 7504

76 * Aluminum and aluminum products, except for 7601 to 7603

78 * Lead and lead products, except for 7801, 7802 and 7804.20.00

79 * Zinc and zinc products, except for 7901 to 7903

80 * Tin and tin products, except for 8001, 8002 and 8007.00.20

8101.96 Tungsten (wolfram) wire

8102.96 Molybdenum wire

8105.90.10 Cobalt plates, sheets, strips, wire, rods, inserts and platelets

8111.00.20 Manganese in sheets, strips, wire, rods, inserts and platelets

8113.00.10 Cermets in sheets, strips, wire, rods, inserts and platelets

82 * Tools, cutlery and cookware, and respective parts, base metal, except for 8207.30.00 (see GROUP I)

83 * Miscellaneous products made of base metals, except for 8301.20.00, 8302.30.00 and 8307.10 (see GROUP I)

8403.10.10 Central heating boilers with a capacity less than or equal to 200,000kcal / hour

8414.20.00 Hand or foot air pumps,

8414.30.11 Hermetic compressors with a capacity less than 4,700 frigorias / hour

8414.30.91

Compressors used in refrigerating equipment, except for hermetic compressors; with a capacity less than or equal to 16,000 frigorias / hour

8414.51 Table fans, pedestal fans, fans with mounts for walls, ceilings or windows with electric motors with an output not exceeding 125W

8414.60.00 Kitchen exhausts, with a maximum horizontal measurements not exceeding 120 cm

8414.90.20 Parts for fans or exhausts

8415 *

Air-conditioning machinery and devices containing a motorized fan and features for changing temperatures and humidity, including those machines and devices in which the humidity cannot be separately regulated, except for 8415.10.90, 8415.20.90, 8415.81.90,8415.82 .90, 8415.83.00 and 8415.90.90 (see GROUP I)

8418 *

Refrigerators, freezers and other materials, machinery to produce cold, with electrical or other equipment; heat pumps, excluding air-conditioning machinery and devices listed under 84.15, except for 8418.50, 8418.61.00, 8418.69.10, 8418.69.20, 8418.69.91, 8418.69.99 and 8418.99.00 (see GROUP I)



GROUP II

MCN DESCRIPTION

8419 *

Apparatus and devices, even electrically heated (except for furnaces, ovens and other equipment listed under 8514), to treat materials through operations requiring changes of temperature, such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming , drying, evaporating, vaporizing, condensing or cooling, except for domestic use; non-electric water heaters, instant heating or storage, except for 8419.20.00,8419.3, 8419.40, 8419.50, 8419.60.00, 8419.8, 8419.90.20, 8419.90.3, 8419.90.40 and 8419.90.90 (see GROUP I)

8421.12.10 Clothes dryers with a capacity in dry weight, lower than or equal to 6kg

8421.91.10 Parts of clothes dryers listed under 8421.12.10

8422.11.00 Household dishwashing machines

8422.90.10 Parts of household dishwashing machines

8423.10.00 Personal scales (for weighing body weight), including baby scales; household scales

8423.90.10 Weights

8423.90.21 Parts for appliances and devices listed under 8423.10

8424.10.00 Fire extinguishers, charged (loaded) or not

8424.81.11 Manual devices for agriculture or horticulture, for projecting, dispersing or spraying fungicides, insecticides and other products to combat pests

8424.89.10 Spraying devices with spray nozzles, aerosol valves, gaskets (gasket canopy) and dip tubes, mounted on a metal body (canopy), used for mounting in the neck of containers to project liquids, powders or foams

8424.90.10 Parts of devices listed under 8424.10 or 8424.81.11

8425.42.00 Hydraulic jacks, except for fixed vehicle lifts for garages

8425.49.10 Manual jacks

8431.10.10 Parts suitable for machinery and devices listed under 84.25 in 8425.19.10 or listed under 8425.39, 8425.42 or 8425.49

8433.1 Lawnmowers

8433.90.10 Parts for lawnmowers 8447.20.10 Hand looms

8448.59.21 Parts and accessories for hand flat-knitting machines

8450.1 Machines with a capacity not exceeding 10 kg in dry clothes

8450.90.90 Parts for washing machines, with or without drying devices except for machines listed under 8450.20

8451.21.00 Driers with a capacity not exceeding 10kg in dry clothes

8451.30.91 Ironing presses weighing less than or equal to 14kg

8451.90.10 Parts for machines listed under 8451.21 8452.10.00 Domestic sewing machines 8452.90.20 Furniture, bases and covers for sewing machines and respective parts 8452.90.81 Shuttle (loop-taker), bobbin cases and spool holders for sewing machines




8452.90.89 Other parts of domestic sewing machines

8469 * Typewriters, except for printers listed under 84.43; word-processing machines, except for 8469.00.10 (see GROUP I)

8470.10.00

Electronic calculators that can work without an external electric power source and pocket devices that include calculators, with recording, reproducing and displaying features

8470.2

Electronic calculators, except for those that can work without an external electric power source and pocket devices that include calculators, with recording, reproducing and displaying features

8470.30.00

Calculators, except for those that work without an external electric power source and pocket devices that include calculators, with recording, reproducing and displaying features

8472.90.40 Machines for sharpening pencils, hole punches, staplers and staple removers

8473.10.90 Parts and accessories for machines listed under 8469, except for those for processing texts

8473.21.00 Parts and accessories for machines listed under 84.70 for electronic calculators listed under 8470.10, 8470.21 or 8470.29

8473.29.20 Parts and accessories for machines listed under 8470.30 or 8470.40

8481.80.1

Devices used in bathrooms or kitchens, except for pressure reducing valves, valves for oil- hydraulic or pneumatic transmissions, valves (water mains), safety or relief valves

8481.80.31

Devices used in gas appliances with a working pressure less than or equal to 50 mbar, especially those that include thermoelectric safety features, used for household appliances, except for pressure reducing valves, valves for oil hydraulic or pneumatic transmissions, valves (gas mains), safety valves or relief

8481.80.91 Aerosol valves

8481.90.10 Parts or aerosol valve or features listed under 8481.80.1

8482 * Roller or needle ball bearings, except for 8482.10.90, 8482.20.90 and 8482.50.90 (see GROUP I)

8501.10.19 Motors with an output not exceeding 37.5w DC, except for those with a step lower than or equal to 1.8 °

8501.10.2 Motors with an output not exceeding 37.5W AC

8501.10.30 Motors with an output not exceeding 37.5W universal

8501.31

Direct current motors; DC generators with an output not exceeding 750W except for motors not exceeding 37.5W and universal motors with an output exceeding 37.5W

8501.40.1

AC motors, single-phase power less than or equal to 15kW except for motors with an output not exceeding 37.5W, universal motors with an output exceeding 37.5W, other direct current motors; DC generators

8503.00.10

Parts suitable for use solely or principally with the machines listed under 8501 or 8502 for motors or generators listed under 8501.10, 8501.20, 8501.31, 8501.32 or item 8501.40.1



GROUP II

MCN DESCRIPTION

8504 *

Electrical transformers, static converters (for example rectifiers), self-induction and reactance coils, except for 8504.2, 8504.31.91,8504.33.00, 8504.34.00, 8504.40.21, 8504.40.30, 8504.40.40, 8504.40.50, 8504.40.90, 8504.90.30 and 8504.90.40 (see GROUP I)

8505 *

Electromagnets; permanent magnets and products intended to become permanent magnets after magnetization; signs, clamps and similar items, magnetic or electromagnetic devices, for fastening; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads, except for 8505.20, 8505.90.80 and 8505.90.90 (see GROUP I)

8506 Electrical cell batteries and electrical primary batteries

8507 * Electric accumulators, including respective separators, whether square or rectangular shape, except 8507.10, 8507.20 and 8507.30.19 (see GROUP I)

8508 * Vacuum, except for 8508.19.00 and 8508.60.00 (see GROUP I)

8509 Household electromechanical devices with electric motors

8510 *

Appliances or devices for shaving, cutting hair or trimming appliances, hair removal devices with electric motors, except for 8510.20.00 and 8510.90.90 (see GROUP I)

8512.10.00 Lighting or visual signaling equipment used on bicycles

8513

Portable electric lanterns that run on their own source of energy (for example, batteries, accumulators, magnets), except for lighting equipment listed under 8512

8516

Electric water heaters, including immersion heaters; electrical apparatus for heating interiors, soil or similar uses; electric appliances for hair care (for example, hairdryers, hair curlers, curling iron heaters) and hand dryers; electric irons; other electric appliances for household use; heating filaments

8517.11.00 Wireless telephone handsets as part of landline telephone appliances

8517.18.10 Intercoms

8517.18.91 Telephone receivers not compatible with other devices

8517.18.99 Other telephone handsets

8517.62.99 Other transmitter handsets

8517.70.29 Other antennas

8518 Microphones and their respective mic stands; loudspeakers, mounted or not in boxes; headphones (earphones), with or without microphones, and sets consisting of a microphone and one or more loudspeakers; electric audio-frequency amplifiers; electric sound amplifier

8519 *

Turntables, electrophones, cassette players and other sound reproducing apparatus, with no sound recording devices, except for 8519.81.20 (see GROUP I)

8521 *

Audiovisual recording or reproducing apparatus, with or without an audiovisual receiver, except for 8521.10.10, 8521.10.90 and 8521.90.10 (see GROUP I)



GROUP II

MCN DESCRIPTION

8522 Parts and accessories suitable for use solely or principally with the apparatus listed under 8519 to 8521

8523 * Prepared for sound recording or similar recordings, except for products listed in Chapter 37, except for 8523.29.11 (see GROUP I)

8525.80.19 Other television cameras

8525.80.29 Other photographic cameras

8526.92.00 Remote control radio apparatus

8527 *

Receiver apparatus for radio-telephony, radio-telegraphy or radio-broadcasting, singular or all inclusive, in the same housing, with recording or sound reproducing apparatus or with a clock, except for 8527.2 (see GROUP I)

8528 *

Television receivers, with or without radio-broadcast receivers or a recording or reproducing sound or images; video monitors and projectors, except for 8528.41.10, 8528.41.20, 8528.49.21, 8528.51.10, 8528.51.20, 8528.61.00, 8528.69.10 and 8528.71.11 (see GROUP I)

8529.10.1 Antennas, except for cell phones

8529.10.90

Antennas and antenna reflectors of all kinds; parts suitable to use together with these items, except for antennas for cell phones and antennas specifically for wireless mobile phones except for telescopic parts

8529.90.90

Parts suitable for use solely or principally with the apparatus listed under 8525 to 8528, except for antennas and antenna reflectors of all kinds; parts suitable to use together with these items, parts of apparatus listed under 8525.10 and 8525.20, apparatus listed under 85.27 or 85.28, for apparatus listed under 8526.10 and apparatus listed under 8526.91

8531 * Electric sound or visual signaling apparatus (for example, doorbells, sirens, indicator panels, burglar alarm devices or fire alarms), except for those listed under 8512 or 8530, except for 8531.20.00 (see GROUP I)

8532 *

Fixed, variable or adjustable electrical capacitors, except for 8532.21.11, 8532.21.19, 8532.23.10, 8532.24.10, 8532.25.10, 8532.29.10 and 8532.30.10 (see GROUP I)

8533 * Electrical resistors (including rheostats and potentiometers), except for heating, except for 8533.21.20 (see GROUP I)

8536 *

Apparatus for switching, protection, shunt connections or in electrical circuits (e.g., switches, relays, circuit breakers, surge suppressors, plugs (male-and-female etc.), mounts for bulbs, joiners, for voltage not exceeding 1,000 VOLTS, except for 8536.50 and 8536.90.40 (see GROUP I)

8537 *

Boards, panels, control boxes, desks, cabinets and other bases with two or more apparatus listed under 8535 or 8536, for electric control or distributing electricity, including those incorporating instruments or apparatus listed in Chapter 90, and numerical control apparatus except for switching apparatus listed under 85.17, except 8537.10.1, 8537.10.20, 8537.10.30 and 8537.20.10 (see GROUP I)

8538 * Parts suitable for use solely or principally with the apparatus listed under 8535, 8536 or 8537, except for 8538.90.10 (see GROUP I)



GROUP II

MCN DESCRIPTION

8539 Standard electric or discharge bulbs and tubes, including items referred to as "headlights and spotlights, in sealed units" and ultraviolet or infrared bulbs and tubes; arc lamps

8540 *

Electronic, hot cathode, cold cathode or Fotoca whole bulbs, tubes and valves (e.g. bulbs, tubes and valves, vacuum or vapor or gas, grinding mercury vapor light bulbs, cathode ray tubes, pipes and valves for television cameras), except for those listed under 8539, except for 8540.20.20 and 8540.40.00 (see GROUP I)

8543.70.20 Devices for electrocuting insects

8543.90.10 Parts of machinery or devices listed under 8543.81 and 8543.89

8544 *

Wire, cables (including coaxial cables) and other conductive, insulated for electrical use (including enameled or anodized), fitted or not with connectors; optical fiber cables, made of individually sheathed fibers, with or without electric conductors or fitted with connecting pieces, except for 8544.30.00, 8544.60.00 and 8544.70 (see GROUP I)

8545 Carbon electrodes, carbon brushes, bulb carbons, battery carbons and other items made of graphite or other carbons, with or without metal, for electrical purposes

8546 Insulators made of any material for electrical purposes

8547

Insulating fittings made solely of insulating material, or with simple metallic parts for mounting (threaded sockets, for example) incorporated during molding, for machines, appliances and electrical installations, except for insulators listed under 8546; conduit tubing and connection parts, made of standard metal lined with insulating material

8712.00 Not motorized bicycles and other cycles (including tricycles)

8713 Wheelchairs and other vehicles for disabled people, whether or not motorized or otherwise mechanically propelled

8714 Parts and accessories for vehicles listed under 8711 to 8713

8715.00.00 Strollers and similar vehicles to transport children, and respective parts

8801 Hot-air balloons and dirigibles; gliders, hang gliders and other aircraft not designed to be motor powered

8804.00.00 Parachutes (including dirigible parachutes and paragliders) and rotary parachutes ("rotochutes"); respective parts and accessories

8903 Yachts and other vessels for leisure or sports; row boats and canoes

8908.00.00 Vessels and other floating structures for demolition

9001 *

Optical fibers and optical fiber bundles; optical fiber cables, except for those listed under 85.44; polarizing material in sheet or plate form; lenses (including contact lenses), prisms, mirrors and other optical elements, made of any material, unassembled, except for those made of glass not optically worked, except for 9001.10 (see GROUP I)



GROUP II

MCN DESCRIPTION

9002 *

Lenses, prisms, mirrors and other optical elements, made of any material, assembled, for instruments or devices, except for those made of glass not optically worked, except for 9002.11.20 (see GROUP I)

9003 Frames for glasses and similar items, and respective parts

9004 Glasses for corrective, protective or other purposes, and similar items

9005 *

Binoculars, telescopes, including astronomy, optical telescopes, and respective mountings; other astronomy instruments and respective mountings, except for radio-astronomy, except for 9005.80.00 and 9005.90.90 (see GROUP I)

9006 *

Photography cameras; apparatus and devices, including flash bulbs and tubes for photography, except for discharge bulbs and tubes listed under 8539, except for 9006.10 and 9006.30.00 (see GROUP I)

9008 Fixed projection apparatus; photography devices for enlargement or reduction

9010.50.90

Apparatus and material for photographic or cinematographic laboratories; negatoscopes, except for apparatus and material for automatically developing photographic film, motion picture film or photographic paper in rolls or to automatically copy film developed onto photographic paper, devices to project or place circuit patterns on sensitized semiconductor materials or photographic processors for electronic imaging, with or without a digital output

9010.60.00 Screens for projection

9010.90.90 Parts and accessories for apparatus or material for laboratories, except for those listed under 9010.10 or item 9010.50.10

9013.80.90

Devices, apparatus and instruments, except for telescopic sights for weapons; periscopes; telescopes for machines, apparatus or instruments, lasers except for laser diodes or liquid crystal devices (LCD)

9017 *

Instruments for drawing, outlining or calculating (for example, drafting machines, pantographs, protractors, drawing cases, slide rules, disc calculation); manual instruments for measuring distances (e.g. meters, micrometers and calibers), not specified or included elsewhere in this chapter, except for 9017.10.10 and 9017.90.10 (see GROUP I)

9018.3 Syringes, needles, catheters, cannulae and similar instruments

9018.49.1 Drill bits

9018.49.20 Files, filing tools

9018.49.99

Dental drilling devices, with singular or multiple functions, on a singular base with other dental equipment, except for drill bits, files, devices for oral treatment, which run on kinetic particle projection or computerized apparatus to design and construct ceramic pieces for dental restoration. Dentist chairs fitted with dental appliances are supported in Group I.

9018.90.2 Scalpels

9018.90.92 Apparatus for measuring blood pressure

9018.90.95 Staples and paper clips, and respective applicators and removers




9018.90.99

Other instruments and apparatus, except those for blood transfusion or intravenous infusion, scalpels, and litotomos litotritores, artificial kidneys, diathermy apparatus, incubators for babies, apparatus for measuring blood pressure, apparatus for intra-urethral microwave therapy (TUMT), apparatus specifically for treating prostatic disease, computerized devices, endoscopes or staples and paper clips and their respective applicators and removers

9020.00 Other breathing apparatus and gas masks, except for protective masks devoid of replaceable mechanical parts or filters

9021

Orthopedic items and apparatus, including braces and medical-surgical slings and crutches; splints, drips and other devices and items for fractures; items and prosthetic devices; devices to facilitate hearing for the deaf and other devices to compensate disabilities or illnesses, which are intended to be carried by hand or on people’s bodies or implanted in the human body

9023.00.00 Instruments, apparatus and models, designed for demonstration purposes (for example, in education or exhibitions), unsuitable for other uses

9025

Hydrometers, pyrometers, liquid-based scales and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, that recording or not, singular or multifunctional

9026 *

Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases [e.g. flow meters, level gauges, manometers, heat meters], except for instruments and apparatus listed under 90.14, 90.15, 90.28 or 90.32, except for 9026.10.11 (see GROUP I)

9028 *

Gas, liquid or electricity meters, including calibrating meters, except for 9028.10.1, 9028.30.11, 9028.30.21 and 9028.30.31 (see GROUP I)

9029 * Other counters/meters (e.g.: revolution counters, production counters, taximeters, distance meters, pedometers); speed indicators and tachometers, except for those listed under 90.14 or 90.15; light meters (strobes), except for 9029.10.10 (see GROUP I)

9032.81.00 Other automatic, hydraulic or pneumatic instruments and apparatus for regulation and control

9033.00.00

Parts and accessories not specified or included elsewhere in this chapter, for machines, appliances, instruments or items in chapter 90

91 Watchmaking items

92 Musical instruments; respective parts and accessories

9401 Seats (except for those listed under 9402), convertible or not into beds, and respective parts

9403

Other furniture and respective parts, except for seats (except for those listed under 9402), convertible or not into beds, and respective parts and medical, surgical, dental or veterinary furniture (for example, operating tables, examination tables, hospital beds with mechanical features for use in clinics, dentist chairs); barbers’ chairs and similar chairs, with lifting features; respective parts



GROUP II

MCN DESCRIPTION

9404

Elastic bed supports; mattresses, duvets/comforters, cushions, ottomans/settees, pillows and similar items, fitted with springs or stuffed internally with any material, including alveolar rubber or plastic, covered or not

9405 *

Lighting devices (including projectors) and respective parts, not specified or included elsewhere; announcements, posters or signboards and illuminated name plates and similar items, with a permanently fixed light source, and respective parts not elsewhere specified or included elsewhere, except for 9405.10.10 (see GROUP I)

95 Toys, games, items for fun or sports; respective parts and accessories

96 Assorted items

97 Works of art, collectors' pieces and antiques




10.29.2013.



GROUP III MCN DESCRIPTION

36 Explosives and gun powder; pyrotechnic items; matches; pyrophoric alloys; flammable materials

8401 Nuclear reactors; non-irradiated fuel elements (cartridges) for nuclear reactors; machinery and devices for isotopic separation

8703

Passenger vehicles and other motor vehicles principally designed to transport people (except for those listed under 8702), including station wagons and racing cars

8705.90.90

Special purpose motor vehicles, except for those principally designed to transport people or goods, trucks, cranes, towers ("derrick") cars, for exploring and drilling, fire fighting vehicles, concrete-mixer trucks and those to determine physical characteristic parameters (profiling) of petroleum wells

8706.00.90 Other chassis with engines for the motor vehicles listed under 8701 to 8705

8710.00.00 Vehicles and other armored combat vehicles, armed or not, and respective parts

8711 Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without sidecars; sidecars

8906.10.00 Warships

9013.10.10 Telescopic sights for weapons

9013.90.00 Parts and accessories for liquid crystal devices not more specifically listed elsewhere; lasers except for laser diodes; except for optical devices and instruments, not specified or included elsewhere in this chapter

93 Arms and ammunition; parts and accessories




10.29.2013



SERVICES NBS DESCRIPTION

1.0101 Construction services for residential buildings

1.0102 Construction services for non-residential buildings

1.0103

Construction services for highways (except for elevated highways), streets, roads, railways, airstrips/tarmacs in airports and airport infrastructure

1.0104.00.00 Construction services for bridges, elevated highways and tunnels

1.0105 Construction services for ports and infrastructure

1.0106 Construction services for dams, aqueducts, irrigation and other water systems, piping, containment and water storage systems

1.0107 Construction services for pipelines and long-distance communication lines, and high-voltage transmission lines

1.0108 Construction services for local pipelines and low and medium voltage transmission lines, communication services and other related construction

1.0109 Construction services for power generation plants and substations

1.0110 Construction services for mines and respective industrial plants, except for power generation plants and substations

1.0111.00.00 Construction services for recreation facilities and outdoor sports amenities

1.0117.00.00 Assembly and erection services for prefabricated constructions

1.1103 Licensing for copyright and related rights

1.1104 Temporary assignment of copyright and related rights

1.1105 Licensing for rights to industrial property

1.1107.00.00 Licensing for rights to integrated circuit topographies (layouts)

1.1110 Contracts of technology transfer

1.12 Research and development services

1.1402 Architectural, urban planning and landscaping services

1.1403 Engineering services

1.1404.1 Geological and geophysical surveying services, as well as other prospecting services

1.1404.2 Topographic and cartographic services

1.15 Information technology services

1.1902 Support services for mining

1.2001 Maintenance and repair services for metal products, machinery and equipment

1.2501 Support services for audiovisual production and related services

1.2701 Assignment of copyright and related rights

1.2702 Assignment of rights to industrial property

1.2704.00.00 Assignment of rights to integrated circuit topographies (layouts)

Note: Complete descriptions and classifications in Brazilian Nomenclature of Services, Intangibles and Other Operations that Produce Variations in the Capital - NBS can be checked on the Ministry of Development Industry and Trade in webpage (http://www.desenvolvimento.gov.br/sitio/interna/interna.php?area=4&menu=3412)

see list of goods eligible for the bndes' support

Documents