selective fit die sets and guiding - quest ready technology

SELECTIVE FIT TM

Die Sets and GuidingFull Service and Full Range

Protected by U.S. and International Patents

THE INNOVATOR OF OUR INDUSTRY®

Die Set, Pin & Bushing Overview

2

Die Sets - We offer a complete service

• “Next Day Die Set” - stock rectangular. “Order today,we’ll ship tomorrow.”

• Special Die Sets, both plainand ball bearing, and 3 PlateDie Sets.

• Aluminum Die Sets

• Blanchard Ground Plates,Special Machining, andParallels.

Index

3

4

5

6

7

8

9

10

11

18

28

32

DIE SETS

Standard, Two PostPlain Bearing Die Sets........

Custom, Two PostAll Steel Die Sets ...............

Custom, Four PostAll Steel Die Sets................

Custom, Two PostBall Bearing Die Sets .........

Custom, Four PostBall Bearing Die Sets ...........

Ground Plate Specs ...........

Aluminum Die Sets ............

INCH Plain BearingComponents....................

INCH Ball BearingComponents ...................

METRIC Plain BearingComponents ...................

METRIC Ball BearingComponents ...................

Guide Pins and Bushings -We offer the full range, inch & metric

• Our Plain Bearing line offers you three types of guide pins(straight, demountable and double diameter) and two kinds ofbushings (demountable steel and our unique, patented SinteredBronze Bushing.) All of these components are color-coded forSelective FitTM and are fully interchangeable with one another.

• Our Ball Bearing line employs the same three guide pins plustwo styles of ball bushings (straight sleeve and demountable).Unlike our competitors, our design is interchangeable with allmajor ball bearing brands on the market. Finally, you have atyour disposal a “one size fits all” ball bearing line.

• We manufacture and stock the world’s largest inventory ofDanly style metric guiding. Why? Because in North Americawe are READY Technology, outside North America we areDanly International*, and we manufacture and sell Danly diesets and guiding through our ten plants and offices in Europeand in the Far East. Now we’re making our extensive line ofmetric components available to our U.S. customers.

*Make no mistake: Neither Ready Technology or Danly International or any of theDanly companies outside North America is affiliated in any way with Danly Die Set orConnell Limited Partnership

In-stockTwo Post Die Sets

4

Standard, Two Post Plain Bearing Die Sets

• Standard, in-stock die sets aremanufactured with our precision guidepins and standard shoulder bushings.

• Bushing clamp position is for left-to-right feed.

• Please specify pin length (L), quantityneeded and catalog number with yourorder. Unless otherwise specified,standard shoulder length bushings willbe supplied.

Order ExampleQty Catalog No. Pin Length

1 2S1006-11 L = 6

In-stock, 2 Post Plain Bearing Die Sets

side view

top view

5

CustomTwo Post Die Sets

Custom, Two Post All Steel Die Sets

Back Post - Type 2B

Diagonal Post - Type 2D

Center Post - Type 2C

Can be made with posts on other diagonal, if specified.Center of die space is in the center of the die plates.

Two Post Die SetsDimensions furnished when customer specifies only A and B dimensions. B dimension does not affect table.

1. Type 2B, 2D, or 2C. Note: O & P should bedifferent diameters on Type 2D & 2C die sets.

2. Dimensions A, B, J, K, and L.

3. Type bushings - sintered bronze bushingssupplied unless otherwise specified.

When ordering custom, all steel die sets, specify:

4. Diameter of threaded shank, if wanted. Seepage 9 for Threaded Shank Selection Chart.

5. How shipment should be made.

6. Custom die sets may not be returned for credit.

7. Quantity needed.

Center of die space is in the center of the die plates.

Custom Four PostDie Sets

6

Custom, Four Post All Steel Die Sets

Four Post - Type 4P

1. This table shows accepted designdimensions. Any or all of these dimensions,however, can be changed to conform tocustomer’s specifications of A, B, O, P, J, K,L, F or W, etc.

2. All die sets are always made so that thepunch holder can not be reversed on dieholder. Type 4Ps are made with samediameter posts, but the right front post isoffset 1/8” toward outside edge of die set.

3. Any of these sets are available both with orwithout shank. Unless otherwise specified,

shank is always located in middle of both Aand B dimensions. For safety reasons, wesupply only threaded shanks. See page 9for Threaded Shank Selection Chart.

4. Die sets of design other than shown in cata-log can be furnished in steel or aluminum.

5. Custom die sets may not be returned forcredit.

6. Sintered Bronze Bushings supplied unlessotherwise specified.

Four Post Die Sets

Right front pin offset 1/8”.

When ordering custom, all steel die sets, specify:

Let Us Quote Your Special Applications• Aluminum die sets.• Three and four platen die sets.• Plate work, ground or unground.• Stress relieved plates.• Die sets can be made with heel blocks.• Per print CNC machining, holes, keyways, cutouts and burnouts.

Dimensions furnished when customer specifies only A andB dimensions.

These dimensions apply to both two post andfour post sets.

7

Two Post BallBearing Die Sets

Custom, Two Post Ball Bearing Die Sets

Back Post - Type 2BB

Diagonal Post - Type 2BD

Center Post - Type 2BC

1. Type 2BB, 2BD, or 2BC.

2. Dimensions A, B, J, and K.

3. Ball bearing die sets will be furnished withstraight steel sleeve bushings or demountableball bearing bushings.

Two Post Die Sets Dimensions furnished when customer specifies only A and B dimensions.

4. Dimension “T” is minimum shut height.

5. Post diameter “O” & “P”. (O and P shouldbe different for 2BD and 2BC.)

6. Custom die sets may not be returned forcredit.

7. Quantity needed.

When ordering custom ball bearing die sets, specify:



8

Four Post BallBearing Die Sets

Four Post - Type 4BB

Custom, Four Post Ball Bearing Die Sets

Four Post Die SetsDimensions furnished when customer specifies only A and B dimensions.

These dimensions apply to both two post and four post sets.

Refer to pages 26 and 27 for the correct selection ofoperating condition and components. Please note thaton long stroke applications, the pin and cage can bedisengaged only if the press is operated at less than150 spm and in a vertical position with accurate ramgib alignment.

Ball Bearing Component Selection

Right front pin offset 1/4” to outside.

Maximum Pin Length= Minimum Shut Height - 3/4”

Maximum Straight Sleeve Length= Minimum Shut Height - Punch Holder Thickness - 1/4”

9

• AISI 1020 Mild Steel Plate - 21 sizes in stock, from 1/2” to 4”.• Blanchard Grinding Available - call for details.• Also available in aluminum - not stocked, specify grade.• Send us your prints - Our email is: [email protected]

Pertinent Die Set StandardsFlatness Plates .0005 per lineal footParallelism Plates .001 per lineal footThickness Plates +1/16 stock setsThickness Plates + 1/16 -1/8 special setsShank Diameter + .000 -.002Guide Pins Squareness .001 in 6 inchesGuide Pins Parallelism .001 in 6 inchesGuide Bushings Squareness .001 in 6 inchesGuide Bushings Parallelism .001 in 6 inchesParallelism Assembled Die Set .0015 per lineal foot

Blanchard Ground Stripper Plates• Burned edges• Thickness +1/16 / - 0• AISI 1020 steel available from stock

Ground Plate Specifications

Threaded Shank SelectionLengthThread

CCatalogNumber

DiameterO

LengthB

1”

2”

2”

2”

PS-01 3/413/4”

11/2”

23/4”

23/4”

23/4”

21/2”

3”

19/16”

PS-1PS-2PS-3PS-4PS-5PS-6PS-7PS-8PS-9PS-11PS-12PS-13PS-14PS-15PS-16PS-17PS-18PS-19

PS-21PS-22PS-23PS-24PS-25PS-26PS-27PS-28



11 1/41 3/81 1/21 5/8*

1 3/42*

2 1/42 1/2*

11 1/41 3/81 1/21 5/8*

1 3/42*

2 1/42 1/2*

1 1/41 3/81 1/21 5/8*

1 3/42*

2 1/42 1/2*

1 1/41 3/81 1/21 5/8*

1 3/42*

2 1/42 1/2*

1 1/41 3/81 1/21 5/8*

1 3/42*

2 1/42 1/2*

* stock lengths* stock lengths

O

****PS-O 5/8 -11 only

10

AluminumDie Sets

Aluminum Die Sets, Plates,Ram and Mold Plates

• One-third the weight of steel

• Faster and easier setup

• Less wear and tear on the machine (clutch, brake, ram, ...)

• Easy machinability means 20-35% increased feed rates

• Uses existing conventional cuttings tools

• Draws heat away from tooling, then dissipates heat quickly

• Rust free, least susceptible to elements

• Impervious to typical (water soluble) die lubes

• Non-magnetic - good environment for in-die sensing

• Stress relieved in the process - a stable materialbefore/after machining

• Easily recyclable

Note: It is recommended to finish heavy (point pressures) machining beforegrinding for best results. We do not recommend using steel and aluminumplates in a die set combination.

* (btu/ft/hr/ft 2/°F)** average coefficient (x 10-6/in./°F)*** (x 106 lbs./in.2)

Advantages of Aluminum:

Four Post - Type 4P

Back Post - Type 2B

Center Post - Type 2C

InchIndex

11

INCH Plain BearingComponents

Precision Guide Pins...........

Demountable Pins...............

Demountable SinteredBronze Bushings.................

Demountable SteelBushings.............................

Double Diameter Pins..........

INCH Ball BearingComponents


Ball Bearing Cages.............

Straight Sleeve Bushings.....

Demountable Bushings........


Selecting the ProperOperating Conditions..........

Selecting the CorrectComponents.......................• Guide Pins• Sleeve Bushings• Cages

Selection Chart...................

In the following 17 pages, you will see a number of innovativeideas designed to increase the performance of your stampingtools, reduce your inventory costs, simplify die assembly andmaintenance, and maximize available die space.

Here are some of the highlights:

READY Plain andBall Bearing Components

• Each Ready pin serves a dual function - it can operate as aplain bearing pin or a ball bearing guide pillar. This saves youthe cost of a dual inventory.

• Ready’s Selective FitTM system matches each pin to the correctbushing to achieve the proper fit. Each part is color-coded(white, blue, or yellow), so as long as the color spot on the pinmatches that of the bushing, the running clearance in eachpin/bushing pair in your tool will be identical.

Since the clearance grows in proportion with the pin diameter,Selective FitTM automatically gives you the proper running fit foryour application.

• You now have a choice of clamping methods with our demount-able pins. You can secure the flange with traditional toe clampsand screws, or you can hold the pin in place with a stopwasher mounted in the underside of the die shoe. By eliminat-ing the toe clamps you gain extra die space.

• Another innovation which saves space is Ready’s patentedRing System. In effect you can now use our ball bearing sleevebushing like a demountable bushing. Since the sleeve bushingand Ring System clamps have a smaller footprint than a tradi-tional demountable bushing you save on die space. Pleaserefer to page 19 for details.

14

14

15

15

16

20

20

21

21

22

24

25

26

Plain BearingComponents

Our Demountable Pins are designed for use in either plainbearing or ball bearing applications. Like our precision press fitpins, they are case hardened to 60 - 64 Rc, then core temperedfor toughness.

They can be assembled to the same die set plate hundreds oftimes without distorting the hole center distances or damagingthe holes themselves. So they not only simplify die building andmaintenance, but they ensure maximum accuracy as well.

Ready demountable pins can be held in place either with toeclamps and screws, or with a retainer plug. This second optionincreases the die space available.

Demountable Steel Bushings (-645)Our Steel Bushings are manufactured to the same high level of precision as ourSintered Bronze Bushings. If operated at moderate speeds and side loads withgood lubrication, they are an economic substitute for sintered bronze bushings.These two types of bushings are fully interchangeable.

Demountable Pins (-835)

Double Diameter Pins (-55)

Demountable Sintered Bronze Bushings(-235, -245, -285)

READY Plain Bearing Components

Precision Guide Pins (-825)Our Precision Guide Pins are designed to be used with eitherplain bearing or ball bearing bushings.

Vacuum degassed, ball bearing quality steel is induction hard-ened to 60 - 64 Rc, then core tempered for toughness. Thisproduces an optimum combination of wear resistance for longoperating life and shock resistance for safety.

Our Sintered Bronze Bushings set a new standard of performance for stampingdie guide bushings. A layer of bronze is sintered to the inside diameter of asteel bushing, creating a mechanical bond at the bronze/steel interface strongerthan that of traditional plated bushings. Please refer to the following page fordetails.

Our double diameter pins are also designed for use with ballbearing as well as plain bearing bushings. They are casehardened to 60-64 Rc for wear resistance, then core temperedfor toughness. A tapped hole is provided at the end of the pin forthe ball cage assembly.

The press fit diameter is interchangeable with familiar brands ofplain bearing and ball bearing pins, so Ready double diameterpins may be used for die maintenance as well as for new tooling.

3 types of pins, 2 types of bushings

12

Bronze plating is not a simpleprocess. If the bushing is dirty orthere are contaminants in the platingsolution, the bronze will not adhereproperly and will peel away from thesurface. The fourth batch of bush-ings, for example, will be less likelyto be defect-free than the first batchplaced in a tank with fresh platingsolution.

The second problem with plating isthat the thickness of the bronze layerdepends on the plating time. A thickbronze layer is simply too costly toproduce, and on large diameterbushings in particular, problems arisewhen the thin plating wears awayand the underlying steel comes incontact with the guide pin.

READY’s Sintered Bronze Bushingssolve both problems. Using a patent-ed manufacturing process, a layer ofbronze is sintered to the inside diam-eter of the steel bushing, creating astrong, reliable mechanical bond.The thickness of the bronze layer isnot limited by time or cost con-

straints, so it is thicker than platedbronze, and it increases proportion-ally with the bushing diameter.

You can test the bond strengthsyourself. Cut through the diameter ofa plated bushing and you stand agood chance to see peeling. Do thesame with our sintered bushing andyou will see that the bronze-steelbond is unaffected. If you need toshorten the inserted diameter to fitour bushing into a thin stripper plate,you can do so without harming it.

There is a third advantage to oursintered bushings. Because sinteredbronze is porous, it holds the lubrica-tion oil in place and helps tomaintain an unbroken lubricationlayer, which improves wear resis-tance. The bronze pores act assmall oil reservoirs, so our SinteredBronze Bushings are more forgivingif maintenance has been overlooked.However, for best results, we recom-mend regular, periodic lubricationwith a high viscosity oil.

13

Compare theBronze Thickness

This view reveals the greater bronzethickness and the porosity of ourSintered Bronze Bushing.

Actual magnified views of bushingcross sections.

Take A Closer Look ...

Compare The Thickness ...

This view reveals the fusion bondingof the thick sintered bronze layer to thesteel substrate.

steel substrate

Sintered BronzeThickness- up to 22 timesthicker than platedbronze

plated bronze thickness

sintered bronze

sintered bronze

Note porosity:this traps andretains oil forlonger life. steel substrate

100x magnification

1000x magnification

fusedbond

• Thicker Bronze: The sintered bronze in our bushings issubstantially thicker than the plating technology it replaces.

• Porous Surface: Holds the lubrication oil where you need itmost, to resist wear. Sintered bronze is porous bronze, up to40% porosity.

• Stronger Bond: Our patented process forms a unique fusionbond so the bronze and substrate become one. See the 1000xmagnification in the adjacent panel.

• Wear Resistance: The combination of increased thickness,porosity and stronger bonding means our bushing is your bestchoice for high speed and eccentric loading. The longest lifepossible under extreme conditions.

Our patented Sintered BronzeBushings offer many advantagesover plated bronze bushings.

14

Precision Guide Pinsand Demountable PinsIN

CH Plain Bearing Components

Demountable Pin Selection Guide (-835)

For Demountable Pin Tap Sizes, see page 17.

Precision Pin Selection Guide (-825)

15

Demountable SinteredBronze and Steel Bushings

Plain Bearing Components INC

H

Demountable Sintered Bronze Bushings (-235, -245, -285)

Demountable Steel Bushings (-645)

Short Shoulder Bushings

Standard Shoulder Bushings


Extra Long Shoulder Bushings

Note: The Demountable Clamp Data is located on page 17.

16

• Ideal for retro-fits to improve productivity anddecrease costly maintenance.

• Proven quality and dependability in dies foryears.

• Readily available.

• Oversize press fit end for die shoe and nominalsize end for bushing.

• Interchangeable with familiar brands.

Double Diameter Pin Selection Guide (-55)

Double DiameterDimensions

Double Diameter Pin Dimensions

PinDiameter

3/4”1”

1 1/4”1 1/2”1 3/4”

2”2 1/2”

3”

0.7521.0021.25251.50251.75252.00252.5033.003

1 1/8”1 1/2”1 3/4”

2”2 1/4”2 1/2”3 1/2”

4”

00+0

-.0005

Length ofPress Fit

B

Double Diameter Pins

DoubleDiameter PinsIN

CH Plain Bearing Components

17

Demountable Pin Clamp Data

Demountable Pin andBushing Clamp Data


H

Demountable Bushing Clamp Data

Four clampsequally spaced for

1 3/4” - 3”diameter pins.

Three clamps equallyspaced for 1” - 1 1/2”diameter pins.

Ready’s Ball BearingGuide Pins Are TrulyInterchangeable

18

Ball Bearing CagesOperating Conditions

For optimum performance guidepins should be mounted in thepunch holder. This allows the ballcage to reposition itself, if preloadis relieved on each press stroke.Complete assemblies (guide pin,ball cage and bushing) should beordered to insure proper fit.

Recommended LubricationWe recommend lubricating theball bushing assembly once each8 hour shift. Use a refined mineraloil with a viscosity of 290/340SSU at 100° F, combining “EP”additives and rust inhibitors, suchas Mobil Compound AA or MobilGear 626.

Installation Instructionsfor Sleeve Bushings UsingBushing Mount1. Degrease bushing OD and

die shoe bore with alcohol,acetone or other volatile solventand wipe dry.

2. Apply Bushing Mount sparinglyto both surfaces.

3. Wring bushing into die shoe.

4. Allow 4-hour cure at 72°F.To accelerate cure, heat withheat-lamp. Do not disturbbushing until cure is complete.

5. Honing is not required afterinstallation.

Precision Guide Pins (-825) Demountable Pins (-835), and DoubleDiameter Pins (-55)

Demountable Ball Bearing Bushings (-855)and Straight Sleeve Bushings (-865)

Ball Bearing Cages (-8225)

You can use any of our guide pins inball bearing applications becauseeach of the 3 styles is designed fordual purpose in both friction solidguiding and ball bearing guiding.

Vacuum degassed, ball bearing quali-ty steel is induction hardened to 60-64 Rc, then core tempered for tough-ness. This produces an optimum com-bination of wear resistance for long

Our Ball Cages use AFBMA Grade10 precision ball bearings, accurateto within .0001”. These ball bearinghave been chosen for their high hard-ness and excellent resistance to wearand deformation. They are retainedsecurely in place by a hardened alu-minum alloy cage, heat treated fortoughness and wear resistance.

Each ball bearing is held in placewith 360° staking. This is a saferdesign than two or four point staking.

We offer two types of ball bearingbushings. Our Demountable BallBearing Bushings are flange mountedand held in place with toe clamps andscrews. They are interchangeable withfamiliar brands of demountable ballbushings.

Our Straight Sleeve bushings offersomething quite new. All sleeve bush-ings 1 1/2” in diameter and largerincorporate our patented Ring Systemclamping groove, which provides sev-eral benefits. Please refer to the follow-ing page for details.

If you prefer, however, you can secureour sleeve bushings in the traditional

operating life and shock resistance forsafety.

The guide pin retains the ball cage bymeans of a washer assembly. Thecage is free to rotate 360°, so scoringand tracking on the guide pin surfaceare eliminated or reduced.

Our guide pins are interchangeablewith all the major brands.

Failure tests show that a 360° stakedball requires a substantially higherforce to become dislodged.

Ready Ball Cages are free to rotatewithin the ball bushing assembly, sowear on the guide pin and bushing isreduced. The ball bearings arearranged in a double spiral pattern,so that each ball bearing travels alongits own unique path. Tracking isreduced and operating life isenhanced.

manner with Bushing Mount. Up toeleven tons of force are required todislodge the bushing once the BushingMount has properly cured. Pleasefollow the assembly procedure out-lined in the side panel on this page.Bushing Mount compound is availableupon request.

Our ball bearing bushings are inter-changeable with most major brands;for brands with a smaller register fitthan ours, we have left the OD of ourstraight sleeve bushing soft, enablingyou to turn down the OD to match.See your READY representative fordetails.

19

The RingSystem

The Ring System - Our Straight Sleeve BushingHas Just Become Demountable

Our patented Ring Systemconsists of a slightly curvedclamp which fits into a 4°angled groove. As the clampingscrew is tightened the clampwedges against the slot, holdingthe bushing securely in place.

This design produces realbenefits. Since the Ring Systemmakes the sleeve bushing easyto assemble and disassemble,die building and maintenanceare simplified. Ring Systembushings are less costly toproduce than demountablebushings, so you save on pur-chase cost.

In addition, Ring Systembushings give you more diespace. You can see in the tablebelow that the Ring Systemsleeve bushing takes up lessspace than a demountable ballbearing bushing of traditionaldesign.

Clamp Data

20

WasherAssemblies soldseparately forball bearingapplications.

Precision Guide Pins,Ball Bearing CagesIN

CH Ball Bearing Components

Ball Bearing Cage Selection Guide (-8225)

Washer Assemblies

Precision Pin Selection Guide (-825)

21

Straight Sleeve andDemountable Bushings

Ball Bearing Components INC

H

Straight Sleeve Bushing Selection Guide (-865)

Demountable Bushing Selection Guide (-855)

Bore Sizes for Ball BearingBushing and Pin Assembly

22

Demountable Pins andBall Bearing CagesIN


Demountable Pin Selection Guide (-835)


Ball Bearing Cage Selection Guide (-8225)

Washer Assemblies

23

Straight Sleeve andDemountable Bushings

Ball Bearing Components INC

H

Straight Sleeve Bushing Selection Guide (-865)

Demountable Bushing Selection Guide (-855)

Bore Sizes for Ball BearingBushing and Pin Assembly

24

Type I

Continuous Preload

Type IIa

Preload Partially Relieved

Type IIb

Preload Relieved

Type III

Disengaged

Type I is recommended forhigh speed, high productiondies. Throughout the pressstroke, all ball bearingsremain in preloaded contactwith the guide pin andbushing.

Please note that a Type Idesign may be run on ashorter stroke press, but not ona press whose stroke is longerthan originally chosen.

Type IIb is recommended ifcreeping is a problem. Assoon as the last ball leavespreload on the up stroke, thecage repositions itself. Thisfeature can eliminate anagging maintenance chore.

Type III permits an unlimitedstroke. Also, if shorterbushings and cages can beused, Type III is economical.

However, a pinch point is created when the componentsdisengage, so Type III shouldnot be selected if it compromises safety.

At top stroke, some ballbearings have left preload.On the down stroke theyreengage the guide pin andbushing, producing a smallupward force which helpscounteract the natural tendency of the ball cage tocreep downward.

OperatingConditionsIN


Selecting the ProperOperating Conditions

25

Selecting theCorrect Components

Guide Pin Length Selection

Guide Pins1. Calculate L using one of the following formulas:

L = T - (U + Z) for assembly with sleeve bushings

L = T - (U + Z) - J + E for demountable bushings

2. For straight pins, select a length equal to L. If L is not a standardlength, choose a longer pin and cut to L, or choose a shorter lengthand recess the pin in the punch holder to L, making sure that theminimum press fit length is at least equal to the pin diameter.

3. For demountable pins, select a length so that K + F is as close aspossible to L without exceeding it.

Bushings1. If the tool’s working stroke is short and there are no off-center loads,

select the shortest bushing which will produce the desired operatingcondition. Turn to the selection chart on pages 26 and 27, find thestroke, and read down that column until it intersects the operatingcondition you have selected. The bushing you need is listed on thatline.

2. When rigidity and resistance to side load are required, use theselection chart to choose the longest bushing consistent with thedesired operating condition.

CAUTION: Make sure the top of the bushing does not strike thepunch holder or the demountable pin clamp screw, either when thedie is new or die life is depleted. If it does, select the next shorterbushing.

Cages1. The page 26-27 selection chart automatically gives you the correct

cage. It is listed on the same line as the bushing you have selected.

2. Different combinations of cages and bushings are possible, but thenthe selection chart does not apply. You will need to make a layout ofthe cage travel from the start of preload to bottom stroke. This figuregives you the position of the guide pin, bushing, and cage at thestart of preload. From that point on, the cage travels half thedistance of the guide pin.

ComponentSelection


H

26

Type IContinuous Preload

Type IIa


Type IIb

Preload Relieved

Type III

Disengaged

Caution: Be sure bushing does not strike punch holder or demountable pin clamping screw atminimum shut height. If this condition exists, use a shorter bushing and corresponding ball cage.

Bushing and Ball CageOperating Condition Selection Chart

SelectionChartIN


MetricIndex

28

30

30

31

31

32

32

33

33

33

34

36

37

38

39

METRIC Plain BearingComponents



Demountable SinteredBronze Bushings.................

Demountable SteelBushings.............................

METRIC Ball BearingComponents


Ball Bearing Cages.............

Stripper Plate Cages ..........

Straight Sleeve Bushings.....

Demountable Bushings........


Selecting Components ........

Type I Selection Chart .........

Selecting Type IIComponents .......................

Type II Selection Chart.........

The following 11 pages represent our extensive line of metric guidecomponents, which have been used by European toolmakers and stampingplants for over 30 years.

Our design is elegantly simple. All of our guide pillars, press fit anddemountable, fit an R6 bored hole. All our bushings, ball bearing andplain bearing, straight anddemountable, fit an H6 boredhole:

As with our line of inchcomponents, each Readymetric pillar can be used eitheras a plain bearing or ballbearing pin. Every pin andbushing is color coded forSelective FitTM, providingyou with the correct runningclearance for your application.

READY Metric Plain Bearingand Ball Bearing Components

Metric Clamp Data

Four clamps equallyspaced for 1 3/4” - 3”diameter pins.

Three clamps equally spacedfor 19 mm through 40 mm

diameter pins.

Metric Hole Boring Chart

Metric ClampData

29

Ball Bearing Stripper Plate Bushings

Metric Clamp Data (cont.)

Low Profile Bushings

Extra Long, Long and Short Shoulder Bushings Clamp Numbers:6-90-1, 6-93-1, 6-95-1

Clamp Numbers:6-96-1, 6-97-1

METR

IC

30

Precision Guide Pinsand Demountable Pins

Precision Pin Selection Guide

MET

RIC Plain Bearing Components

Demountable Pin Selection Guide

31

Demountable SteelBushings and SinteredBronze Bushings

Short Shoulder Bushings


Extra Long Shoulder Bushings

Low Profile Bushings

Please Note: The Demountable Clamp Data is located on page 29.

Demountable Pin Selection Guide Continued

Demountable SinteredBronze and Steel Bushings

Plain Bearing ComponentsM

ETRIC

32

Precision Pins and Ball Bearing CagesM

ETR

IC Ball Bearing Components

Precision Pin Selection Guide Ball Bearing Cage Selection Guide


Washer Assemblies

Type I

Type II

33

Bushings andStripper Plate Cages

Ball Bearing ComponentsM

ETRIC

Stripper Plate Bushing and Cage Selection Guide

Straight Sleeve Bushing Selection Guide

Demountable Bushing Selection Guide

34

Demountable Pins, and CagesM

ETR


Demountable Pin Selection Guide Ball Bearing CageSelection Guide

Type I

Type II


Washer Assemblies

35

Bushings andStripper Plate Cages

Ball Bearing ComponentsM

ETRIC

Stripper Plate Bushing and Cage Selection Guide

Straight Sleeve Bushing Selection Guide

Demountable Bushing Selection Guide

36

Selecting Components

Guide Pin Length Selection Bushings1. If the tool’s working stroke is short and there are no off-center loads,

choose the shortest bushing. Find the stroke in the selection chartand read down that column until it intersects the color bar. Thebushing you need is listed on that line.

2. If rigidity and resistance to side load are required, choose thelongest bushing. Check that the top of the bushing will not hit theunderside of the punch holder (or clamping screw in the case ofdemountable pins) at minimum shut height.

CAUTION: Make sure the top of the bushing does not strike the punchholder or the demountable pin clamp screw, either when the die isnew or die life is depleted. If it does, select the next shorter bushing.

Cages1. For Type I cages, choose the length whose color code in the adjacent

selection chart matches that of the bushing you have selected.

2. For Type II cages, the selection chart on page 39 automatically givesyou the correct cage. It is listed on the same line as the bushing youhave selected.

ComponentSelection

Ball Bearing Components

Guide Pins1. Calculate L using one of the following formulas:

L = T - (U + Z) for assembly with sleeve bushings

L = T - (U + Z) - J + E for demountable bushings

2. For straight pins, select a length equal to L. If L is not a standardlength, choose a longer pin and cut to L, or choose a shorter lengthand recess the pin in the punch holder to L, making sure that theminimum press fit length is at least equal to the pin diameter.

3. For demountable pins, select a length so that K + F is as close aspossible to L without exceeding it.

MET

RIC

37

Type I Cages

38Caution: Be sure bushing does not strike punch holder (or in the case of demountable pins, the clamps retaining the pins)at minimum shut height. If this condition exists, use a shorter bushing and corresponding ball cage.

Type II ComponentSelection ChartM

ETR


Selecting Type II Components

Type IContinuous Preload

Type IIa


Type IIb

Preload Relieved

Type III

Disengaged

39

Type II Cages

STANDARD DIE SUPPLYSubsidiary of READY TECHNOLOGY, INC.

630 Kiser St. • Dayton, OH 45404 (800) 367-3437 • (937) 228-8181 • FAX: (937) 228-2928

www.readytechnology.com© 2006 READY Technology, Inc.

CATALOG # 0206

The Innovator of Our IndustrySM

H

Our factories and offices:

U.S.A. • U.K. • France • Belgium • Germany • Sweden • Netherlands • Singapore

selective fit die sets and guiding - quest ready technology

Documents