seltec / valeo — compressorsbasic seltec/valeo compressor specifications acceptable mounting...

CO

MP

RE

SS

OR

S

© 2017 MEI Corporation 311

Identification Tag (cannot be used for ordering purposes)

TAP99445699

Seltec Body Number (not complete assy.)

Serial Number

Lubricant Amount - 150 cm3

Month Produced: 1-6 January thru June 7-12 July thru DecemberDecade Code:

8 Represents first half of 2000’sDesignates Year of Manufacture:5 Represents 2005

Lubricant Type

Type and Model

HSTM

08

BASIC SELTEC/VALEO COMPRESSOR SPECIFICATIONS Acceptable Mounting Angles

NOTES:(1) If retrofitting system to R134a, follow Seltec’s Retrofit Procedures for changing oil types. Seltec R12 compressors are factory equipped

with mineral oil. R134a compressors are factory equipped with PAG oil (#8207). (2) Amounts shown are standard factory recommendations only. For systems with unusually long hose lengths, or with more than 56 oz. of

refrigerant charge, consult manual. Also, whenever a component in the system has been flushed or replaced, or a leak is suspected, the oil level in the compressor should be checked.

(3) TM16 HD compressors can handle up to approximately 40,000 BTU evaporator output.(4) TM31 is designed for bus and transit applications.

See page 310 for Compressor Oil Type Chart

To convert c.c. to ounces multiply c.c. by 0.03385

See page 314 for compressor model Interchange Chart.

Part Number Label

Refrigerant Type

Seltec compressors are assembled units which use only a few basic body styles. During the manufacturing process, the clutch and manifold (if required) is attached to the compressor body, and an identification label is then added. This label identifies the compressor assembly. It is important to understand that all other label numbers on the compressor are not relevant to the final assembled product.

(identifies specifications only)

(Required to Identify Assembly))(identifies mfg. part number of complete assembly)

SELTEC / VALEO — COMPRESSORS

TM8HD R134a 5.2 (82) PAG46 5.0 (150 cc) CW or CCWTM13HD R134a 8.0 (131) PAG46 5.0 (150 cc) CW or CCWTM15HD R12/R134a 9.0 (147) PAG46 5.0 (147cc) CW or CCWTM16HD (3) R134a 9.7 (163) PAG46 5.5 (163 cc) CW or CCWTM21HX R134a 13.1 (215) PAG46 6.9 (203 cc) CW or CCWTM31HD (4) R134a 15.6 (255) PAG46 16.9 (500 cc) CW

Displacement Oil Oil Charge (2)Model Refrigerant cu. in. (c.c.) Type Amt (Fl. Oz.) Rotation

THERE ARE FIVE (5) TYPES OF NUMBERS THAT CAN BE FOUND ON THE LABELOne of these is required to identify the compressor assembly.488-xxxxx (older models) example: 488-45011435-xxxxx (newer models) example: 435-55011100-xxxxx (newer models) example: 100-55011103xxxxx (newer models-Valeo brand) example: 10355011252xxxx (ICE brand) example: 2521152

Part Number Label

2521152

10055011SAME AS

488-45011

435-55011SAME AS

103-55011SAME AS

NOTE:The ID tag located on rear head, is not the mfg. part number.

(EXAMPLE SHOWN)

The tag I.D.’s the body style only, not the assembly.

NOTE

Must have a number label to I.D. the compressorassembly.

NOTE

© 2017 MEI Corporation

CO

MP

RE

SS

OR

S

312

COMPRESSORS — SELTEC / VALEO

There are Different Ways to Choose the Correct Seltec Replacement Compressor:Application - refer to the application section looking up application by Make, Year and Model and select the compressor needed. If it is not listed in the application section then follow the guidelines below.Part Number Description: 1. Locate the Part Number Tag on the compressor body. The tag lists an eight digit number. The first three digits begin with 435- or 488-, the next five digits is the Seltec “Part Number” needed. 2. Refer to the chart on page 314. The chart is listed in ascending order by the Seltec part numbers along with our corresponding number and the compressors characteristics or specifications. 3. Verify the compressor using the visual photo section. Part numbers are listed in ascending order.

Selecting The Correct Seltec Compressor

Universal Style - A universal style Seltec compressor is available that can be used to replace most R12 and R134a Seltecand Sanden type models. They are available in 5 different clutch styles, in both 12 volt and 24 volt (see page 328).

SELTEC/VALEO EAR MOUNT DIMENSIONS (TM16)

Monolithic Style Head(fittings cast into head)

2 groove

Vertical Manifold Style(bolt-on fittings)

multi-groove


2 groove


1 groove, Over Hang

9-3/4” 9-5/8”9-7/8”8-7/8”

SELTEC/VALEO DIRECT MOUNT BODY DIFFERENTIATION(TM15 has different mounting dimensions than Sanden models)

(TM 16 and TM 21 has the same mounting dimensions as Sanden models)

TM15 - Body Only(500630-7431)

3-17/32” (90mm)

3-1/16”(78mm)

TM16 - STD Body (Z0006406A)

3-5/8”(92mm)

3-7/16” (87mm)

TM 21 - Body(Z0006433A)

3-5/8”(92mm)

3-7/16” (87mm)

DIESEL KIKI STYLE / ZEXEL - DKS15CH Head Identification (compressor shown on pages 323, 324.)

STYLE 1

#10 Suction: 0.576 I.D. #8 Discharge: 0.445 I.D.2 pm rear view, bolt hole

#10 Suction: 0.625 I.D. #8Discharge: 0.432 I.D.10 pm rear view, bolt hole

#10 Suction: 0.715 I.D. #8 Discharge: 0.595 I.D.10 pm rear view, bolt hole

#10 Suction #8 Discharge rear view, w/o bolt hole

STYLE 2 STYLE 3 STYLE 4

Tear Drop

#10 #10 #10 #10

#8 #8 #8 #8

Tear Drop

CO

MP

RE

SS

OR

S


STYLE A

STYLE D

STYLE F

STYLE C

STYLE I

UNIVERSAL Horizontal GM Pad Head uses Bolt-on Manifolds

STYLE G


TECHTIP

BOLT-ON Manifolds Identification - for Pad Mount Horizontal Style “G” Heads

• O’ring between manifold and compressor: Part #0117.

• Manifold Bolt: use torque wrench 17-24 ft. lbs.

5590 ..............Forged Steel5590A ...........AluminumVertical 3/4” x 7/8”w/R12 Charging PortsSingle Bolt Application

STYLE E

5593 ..............Forged Steel5593A ...........AluminumVertical 1”-14 Tube-Ow/o Charging PortsSingle Bolt Application

5597 ..............Forged Steel5597A ...........AluminumInverted Vertical 3/4” x 7/8” Male w/o Charging PortsSingle Bolt Application-Bus

5591 ..............Forged SteelHorizontal 3/4” x 7/8” Single Bolt Application

5594 ..............Forged Steel5594A ...........AluminumHorizontal 1”-14 Tube-Ow/o Charging PortsSingle Bolt Application

5592 ..............Forged SteelVertical 3/4” x 7/8”w/o Charging PortsSingle Bolt Application

#10#8

Manifold Not Reversible

#10 #8

#10#8

5208 Universal Manifold#10 x #12 Male Insert O’ring FittingsFits: Sanden, Seltec Compressors.

#10#12

5206 Universal Swivel Manifold#8 x #10 Male Insert O’ring FittingsFits: Sanden, Seltec, A6 Compressors.

#8#10

5591A ...........AluminumHorizontal O’ring (3/4” x 7/8”)Single Bolt Application

5592A ...........AluminumVertical O’ring (3/4” x 7/8”) w/o Charging PortsSingle Bolt Application

#10 #10#8 #8

#10 #8


CO

MP

RE

SS

OR

S

314

488-23011 5811 — 5590 DK-15CH C.I. VERT 3/4x7/8 EAR 132 2 12V BULLET488-23015 5812* — 5590 DK-15CH C.I. VERT 3/4x7/8 EAR 132 2 24V BULLET488-23019 — — 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 119 6 12V BULLET488-23021 5822 — — DK-15CH ALUM. VERT 3/4x7/8 EAR 132 2 12V BULLET488-23035 5823* — — DK-15CH ALUM. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-23052 — — 5591 DK-15CH C.I. HORIZ 3/4x7/8 EAR 123 7 12V BULLET488-23056 — — — DK-15CH ALUM. VERT 3/4x7/8 EAR 132 2 24V BULLET488-23063 5863 — 5590 DK-15CH C.I. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-23065 5823 — 5590 DK-15CH C.I. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-23069 5878* — 5590 DK-15CH C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-23073 — — 5593 DK-15CH C.I. VERT 1”-14 EAR 119 8 12V BULLET488-23078 5878 — 5590 DK-15CH C.I. VERT SPECIAL EAR 132 2 12V DIODE488-23079 5878 — — DK-15CH C.I. VERT FLARE EAR 132 2 24V BULLET488-25002 5794* 5077 — TM-15HD ALUM. VERT 3/4x7/8 EAR 132 2 24V —488-25003 5794* 5076 — TM-15HD C.I. VERT FLARE EAR 132 2 12V BULLET488-25006 5878 — — TM-15HD ALUM. VERT 3/4x7/8 EAR 132 2 12V DIODE488-25011 5811 5076 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 12V BULLET488-25015 5812* 5077 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 24V BULLET488-25017 5794* 5077 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 132 2 24V BULLET488-25018 5865A 5054 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 125 2 12V BULLET488-25021 5822 5076 — TM-15HD ALUM. VERT 3/4x7/8 EAR 132 2 12V BULLET488-25022 5822 5076 — TM-15HD ALUM. VERT FLARE EAR 132 2 12V BULLET488-25023 54455* — 5593 TM-15HD C.I. VERT 1”-14 EAR 132 2 12V BULLET488-25032 5806* — 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 123 6 24V BULLET488-25033 5863* 5056 — TM-15HD ALUM. VERT 3/4x7/8 EAR 125 1 OH 12V —488-25035 5823* 5054 — TM-15HD ALUM. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-25043 5865 5050 — TM-15HD ALUM. VERT 3/4x7/8 EAR 125 2 12V BULLET488-25056 — 5077 — TM-15HD ALUM. VERT 3/4x7/8 EAR 132 2 24V BULLET488-25063 5863 5056 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-25065 5823 5054 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET

2521136 5934 — — TM08HD ALUM. VERT — EAR 135 6 12V 1 WIRE2521210 5897 — — TM31 — HORIZ 1 1/16”x7/8” DIR 152 2 24V 1 WIRE2521211 5898 5035 — TM31 — HORIZ 1 1/16”x7/8” DIR 152 2 12V 1 WIRE2521212 5900 — — TM31 — HORIZ 1 1/16”x7/8” DIR 152 2 24V 1 WIRE2521213 5899 5079 — TM31 — HORIZ 1 1/16”x7/8” DIR 152 8 12V 1 WIRE2521214 5901 — — TM31 — HORIZ 1 1/16”x7/8” DIR 152 8 24V 1 WIRE2521257 5933 — — TM08HD ALUM. VERT — ALT 123 6 12V 1 WIRE2521261 5932 — — TM08HD ALUM. VERT — ALT 123 4 12V 1 WIRE— 5931 — — TM08HD ALUM. VERT — ALT 135 2 12V 2 WIRE276-9875 51616 — — TM08HD — — PAD EAR 135 2 12V (CAT)


SELTEC PART # PART # PART # COMPR FITTING PULLEY COILNUMBER COMP. CLUTCH MANIFOLD MODEL HEAD POS SIZE MOUNT DIA mm GRV VOLT WIRE

Listed in ascended order by ICE number / Seltec number.

For a complete ICE and SELTEC / VALEO Interchangerefer to Interchange Section in back of catalog.

ICE PART # PART # PART # COMPR FITTING PULLEY COILNUMBER COMP. CLUTCH MANIFOLD MODEL HEAD POS SIZE MOUNT DIA mm GRV VOLT WIRE

Listed in ascended order by Seltec number.

NOTE: ( — ) DESIGNATES CALL FOR AVAILABILITY ( * ) DESIGNATES NOT EXACT MATCH

CO

MP

RE

SS

OR

S


488-25069 5878 — 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-25071 5878 — 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 12V BULLET488-25077 5878 — 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-25078 5878 — 5590 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-25080 5822* 5076 — TM-15HD ALUM. VERT 3/4x7/8 EAR 132 2 12V BULLET488-25086 5822 5076 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 119 6 12V BULLET488-25122 5805* 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 8 12V BULLET488-25126 5805* 5051 5594 TM-15HD C.I. HORIZ 1”-14 EAR 123 8 12V BULLET488-25200 5805* 5051 — TM-15HD C.I. HORIZ PAD EAR 125 2 12V BULLET488-42015 — — — TM-08HD ALUM. VERT 3/4x7/8 EAR 135 2 24 BULLET488-42017 5931 — — TM-08HD ALUM. VERT 3/4x7/8 ALT 135 2 12 DIODE488-42021 5934 — — TM-08HD ALUM. VERT 3/4x7/8 EAR 135 2 12V BULLET488-42080 5932 — — TM-08HD ALUM. VERT 3/4x7/8 ALT 123 4 12 BULLET488-42081 5933 — — TM-08HD ALUM. VERT 3/4x7/8 ALT 123 6 12 BULLET488-43011 5711 5076 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 132 2 12V BULLET488-43019 5784* 5051 — DK-15CH ALUM. VERT 3/4x7/8 EAR 123 6 12V BULLET488-43021 5722 5076 — DK-15CH ALUM. VERT 3/4x7/8 EAR 132 2 12V BULLET488-43030 5760 5076 5591 DK-15CH C.I. HORIZ 3/4x7/8 EAR 132 2 12V BULLET488-43052 5783* 5051 5591 DK-15CH C.I. HORIZ 3/4x7/8 EAR 123 7 12V BULLET488-43061 5724* — 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 159 1 VG 24V BULLET488-43063 5763 5056 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-43065 5723 5054 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-43068 5783* 5051 5591 DK-15CH C.I. HORIZ 3/4x7/8 EAR 123 6 12V BULLET488-43069 5778* — 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-43073 5804* — 5592 DK-15CH C.I. VERT 3/4x7/8 EAR 159 1 VG 24V BULLET488-43078 5778* — 5592 DK-15CH — VERT 3/4x7/8 EAR 132 2 12V DIODE488-43094 5728 5054 5593 DK-15CH C.I. VERT 1”-14 EAR 159 1 VG 12V BULLET488-43095 5729 5051 5594 DK-15CH C.I. HORIZ 1”-14 EAR 123 7 12V BULLET488-45011 5711 5076 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 135 2 12V BULLET488-45013 — 5076 — TM-15 ALUM. VERT TOP PAD EAR 132 2 12V BULLET488-45015 5756 5077 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 135 2 24V BULLET488-45016 5756* 5077 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 24V BULLET488-45017 5794* 5077 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 132 2 24V BULLET488-45018 5711 5076 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 125 2 12V BULLET488-45019 5757 5051 — TM-15HD ALUM. VERT 3/4x7/8 EAR 123 6 12V BULLET488-45021 5722 5076 — TM-15HD ALUM. VERT 3/4x7/8 EAR 135 2 12V BULLET488-45023 5733 5076 5593 TM-15HD C.I. VERT 1”-14 EAR 132 2 12V BULLET488-45025 — 5077 — TM-15 ALUM. VERT TOP PAD EAR 132 2 24V BULLET488-45030 5760 5076 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 135 2 12V BULLET488-45033 5763* 5056 — TM-15HD ALUM. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-45035 5723* 5054 — TM-15HD ALUM. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-45036 5760* 5076 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 125 2 12V BULLET488-45043 5732 5050 — TM-15HD ALUM. VERT 3/4x7/8 EAR 125 2 12V BULLET488-45051 5784 5051 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 123 7 12V BULLET488-45052 5783* 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 7 12V BULLET488-45056 5756 5077 — TM-15HD ALUM. VERT 3/4x7/8 EAR 132 2 24V BULLET488-45057 5724 — — TM-15HD ALUM. VERT 3/4x7/8 EAR 159 1 VG 24V BULLET488-45061 5734 — 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 159 1 VG 24V BULLET488-45063 5763 5056 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-45065 5723 5054 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-45068 5755 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 6 12V BULLET488-45073 5750 — 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 159 1 VG 24V BULLET

Listed in ascended order by Seltec number (continued).





CO

MP

RE

SS

OR

S

316

488-45075 5789 5050 5594 TM-15HD C.I. HORIZ 1”-14 EAR 125 2 12V BULLET488-45077 5778 — 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-45081 5765 5054 5591 TM-15HD C.I. HORIZ 3/4x7/8 DIR 158 1 VG 24V BULLET488-45082 5766 5051 5592 TM-15HD C.I. VERT 3/4x7/8 DIR 123 8 12V BULLET488-45084 5767 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 DIR 123 8 12V BULLET488-45088 5768 5053 5592 TM-15HD C.I. VERT 3/4x7/8 DIR 122 PV6 12V BULLET488-45090 5777 5055 5592 TM-15HD C.I. VERT 3/4x7/8 DIR 132 2 24V BULLET488-45092 5769 5055 5592 TM-15HD C.I. VERT 3/4x7/8 DIR 132 2 12V BULLET488-45094 5728 5054 5593 TM-15HD C.I. VERT 1”-14 EAR 159 1 VG 12V BULLET488-45097 5787 5051 5594 TM-15HD C.I. HORIZ 1”-14 EAR 123 6 12V BULLET488-45118 5805* 5051 — TM-15HD ALUM. VERT 3/4x7/8 EAR 123 8 12V BULLET488-45120 5783* 5051 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 123 8 12V BULLET488-45121 5784 5051 — TM-15HD ALUM. VERT 3/4x7/8 EAR 123 8 12V BULLET488-45122 5783 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 8 12V BULLET488-45123 5806 — 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 8 24V BULLET488-45125 5806* — 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 123 8 12V BULLET488-45126 5779F* 5051 5594 TM-15HD C.I. HORIZ 1”-14 EAR 123 8 12V BULLET488-45128 5783 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 8 12V WTHRPK488-45131 5806 — — TM-15HD ALUM. VERT 3/4x7/8 EAR 123 8 24V BULLET488-45141 5805 — — TM-15HD ALUM. VERT 3/4x7/8 EAR 123 8 12V BULLET488-45210 5780 5076 — TM-15HD ALUM. HORIZ PAD EAR 132 2 12V BULLET488-45212 5781 5077 — TM-15HD ALUM. HORIZ PAD EAR 132 2 24V BULLET488-45222 5751 5050 — TM-15HD ALUM. HORIZ PAD EAR 125 2 12V BULLET488-45226 5753 5054 — TM-15HD ALUM. HORIZ PAD EAR 159 1 VG 12V BULLET488-45228 5804 — — TM-15HD ALUM. HORIZ PAD EAR 159 1 VG 24V BULLET488-45234 5779 5051 — TM-15HD ALUM. HORIZ PAD EAR 123 8 12V BULLET488-45236 5806 — — TM-15HD ALUM. HORIZ PAD EAR 123 8 24V BULLET488-45238 5809* — — TM-15HD ALUM. HORIZ PAD EAR 132 2 12V 2 WIRE488-45319 5784 — 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 123 6 12V BULLET488-45321 — 5055 5592 TM-15HD ALUM. VERT 3/4x7/8 EAR 135 2 12V BULLET488-45347 5757* 5051 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 123 6 12V BULLET488-45356 5756* 5077 5592 TM-15HD C.I. VERT 3/4x7/8 EAR 132 2 24V BULLET488-45368 5783* 5051 5591 TM-15HD C.I. HORIZ 3/4x7/8 EAR 123 6 12V BULLET488-46011 5791 5076 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 135 2 12V BULLET488-46015 5796 5077 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 135 2 24V BULLET488-46017 5794* 5077 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 135 2 24V BULLET488-46018 5808 5050 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 125 2 12V BULLET488-46019 5784 5051 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 123 6 12V BULLET488-46021 5798 5076 — TM-16HD ALUM. VERT 3/4x7/8 EAR 135 2 12V BULLET488-46023 5792* 5076 5593 TM-16HD C.I. VERT 1”-14 EAR 135 2 12V BULLET488-46024 5805E 5051 5593 TM-16HD C.I. VERT 1”-14 EAR 123 7 12V BULLET488-46026 5805E 5051 5593 TM-16HD C.I. VERT 1”-14 EAR 123 6 12V BULLET488-46028 5792* 5076 5594 TM-16HD C.I. HORIZ 1”-14 EAR 132 2 12V BULLET488-46029 5794* 5077 5594 TM-16HD C.I. HORIZ 1”-14 EAR 132 2 24V BULLET488-46030 5790 5076 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 135 2 12V BULLET488-46032 5802* — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 119 6 24V BULLET488-46033 5793* 5056 — TM-16HD ALUM. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-46035 5795* 5054 — TM-16HD ALUM. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-46036 5808* 5050 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 125 2 12V BULLET488-46038 — — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 132 SHD 8 12V BULLET488-46041 51607 — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 152 SHD 2 12V BULLET488-46043 5415 5050 — TM-16HD ALUM. VERT 3/4x7/8 EAR 125 2 12V —

COMPRESSORS — SELTEC / VALEOListed in ascended order by Seltec number (continued).



CO

MP

RE

SS

OR

S


488-46047 5805D* 5051 — TM-16HD ALUM. VERT 3/4x7/8 EAR 123 6 12V BULLET488-46048 51614 — 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 152 SHD 2 24V BULLET488-46050 51609 — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 158 SHD 1 VG 12V BULLET488-46055 — — — — — VERT 3/4x7/8 EAR 159 1 VG 24V —488-46056 5796* 5077 — TM-16HD ALUM. VERT 3/4x7/8 EAR 132 2 24V BULLET488-46057 51608 — — TM-16 D VERT — EAR — 1 VG 24V BULLET488-46061 5804* — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 159 1 VG 24V BULLET488-46063 5793 5056 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 125 1 OH 12V BULLET488-46065 5795 5054 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 159 1 VG 12V BULLET488-46068 5801* 5051 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 119 6 12V —488-46069 5797* — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 132 2 12V DIODE488-46073 5804* — 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 159 1 VG 24V BULLET488-46075 5808* 5050 5594 TM-16HD C.I. HORIZ 1”-14 EAR 125 2 12V BULLET488-46077 5797 — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 135 2 12V DIODE488-46081 5807* 5056 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 125 1 OH 12V BULLET488-46094 5799 5054 5593 TM-16HD C.I. VERT 1”-14 EAR 159 1 VG 12V BULLET488-46097 5801* 5051 5594 TM-16HD C.I. HORIZ 1”-14 EAR 123 6 12V BULLET488-46100 5414 — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 152 SHD 2 24V BULLET488-46120 5805D 5051 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 123 8 12V BULLET488-46121 5800 5051 — TM-16HD ALUM. VERT 3/4x7/8 EAR 125 8 12V BULLET488-46122 5805C 5051 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 123 8 12V BULLET488-46123 5806* — 5591 TM-16HD C.I. HORIZ 3/4x7/8 EAR 123 8 24V BULLET488-46124 5805E 5051 5593 TM-16HD C.I. VERT 1”-14 EAR 123 8 12V BULLET488-46125 5806* — 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 123 8 24V BULLET488-46126 5805F 5051 5594 TM-16HD C.I. HORIZ 1”-14 EAR 123 8 12V BULLET488-46204 5810 — 5592 TM-16HD ALUM. HORIZ PAD EAR 152 SHD 2 12V BULLET488-46210 5792 5076 — TM-16HD ALUM. HORIZ PAD EAR 132 2 12V BULLET488-46212 5794 5077 — TM-16HD ALUM. HORIZ PAD EAR 135 2 24V BULLET488-46218 5801 5051 — TM-16HD ALUM. HORIZ PAD EAR 123 6 12V BULLET488-46220 5802 — — TM-16HD ALUM. HORIZ PAD EAR 123 6 24V BULLET488-46222 5808 5050 — TM-16HD ALUM. HORIZ PAD EAR 125 2 12V BULLET488-46225 — — — TM-16HD ALUM. HORIZ PAD EAR 132 SHD 8 24V —488-46226 5803 5054 — TM-16HD ALUM. HORIZ PAD EAR 159 1 VG 12V BULLET488-46228 5804 — — TM-16HD ALUM. HORIZ PAD EAR 159 1 VG 24V BULLET488-46230 5807 5056 — TM-16HD ALUM. HORIZ PAD EAR 125 1 OH 12V BULLET488-46234 5805 5051 — TM-16HD ALUM. HORIZ PAD EAR 123 8 12V BULLET488-46236 5806 — — TM-16HD ALUM. HORIZ PAD EAR 123 8 24V BULLET488-46238 5809 5076 — TM-16HD ALUM. HORIZ PAD EAR 125 2 12V 2 WIRE488-46240 5809* — — TM-16HD ALUM. HORIZ PAD EAR 132 2 12V 2 WIRE488-46241 — — — TM-16HD ALUM. HORIZ PAD EAR 125 2 24V —488-46244 — — — TM-16HD ALUM. HORIZ PAD EAR 123 8 12V —488-46321 5813 5055 — TM-16HD ALUM. VERT 3/4x7/8 EAR 135 2 12V BULLET488-46356 5796* 5077 5592 TM-16HD C.I. VERT 3/4x7/8 EAR 132 2 24V BULLET488-46500 5896 5078 — TM-31 — O’RING 1 1/16” x 7/8” DIR 152 2 12V 1 WIRE488-46510 5897 — — TM-31 — O’RING 1 1/16” x 7/8” DIR 152 2 24V 1 WIRE488-46520 5898 5035 — TM-31 — O’RING 1 1/16” x 7/8” DIR 152 2 12V 1 WIRE488-46530 5900 — — TM-31 — O’RING 1 1/16” x 7/8” DIR 152 2 24V 1 WIRE488-46540 5899 5079 — TM-31 — O’RING 1 1/16” x 7/8” DIR 152 8 12V 1 WIRE488-46550 5901 — — TM-31 — O’RING 1 1/16” x 7/8” DIR 152 8 24V 1 WIRE488-46560 5910 — — TM-31 — — — DIR 152 10 12V —488-46570 5904 — — TM-31 — — — DIR 152 10 24V BULLET488-46590 51604 — — TM-31 — — — DIR 152 12 24V —






CO

MP

RE

SS

OR

S

318

CO

MP

RE

SS

OR

S

The overall length of a Seltec compressor may be a critical factor in certain applications. Seltec clutches are supplied in both 3-eye and leaf spring styles. The 3-eye clutch protrudes farther out than the leaf spring type. Although the 3-eye design gives quieter operation during cycling, certain applications (bus) use the leaf spring clutch do to space limitations. These applications may also require the use of a one piece aluminum head compressor instead of the pad & manifold combination. Check before substituting a longer length compressor assembly.

When replacing an R12 compressor with and R134a type you will need to do the following:Since ALL R134a compressors do not contain service (schrader) ports needed to hook up manifold gauge hoses for servicing and charging, the additional purchase of R134a service ports are required. (The ports required are compressor specific, relating to the style of head where the A/C hoses are attached). Once the head style is determined, the ports simply are attached to the compressor fittings.

TECHTIP




488-47240 5877 — — TM-21HX ALUM. HORIZ GM PAD DIR 145 2 12V 2 WIRE488-47242 5879, G — — TM-21HX ALUM. HORIZ GM PAD DIR 145 2 24V 2 WIRE488-47244 5880, G — — TM-21HX ALUM. HORIZ GM PAD DIR 141 8 12V 2 WIRE488-47246 5881 — — TM-21HX ALUM. HORIZ GM PAD DIR 141 8 24V 2 WIRE103-47250 5935 TM-21HX G HORIZ PAD DIR 152 1 AG 12V 2W DUE103-56282 5923A 5051 — TM-16 G HORIZ PAD DIR 120 8 12V 1 WIRE103-56396 — — — TM-16 D VERT — DIR 119 6 12V BULLET103-56400 51605 — — TM-16 G HORIZ PAD DIR 119 10 12V BULLET103-56401 51611 — — TM-16 Inverted VERT O/R DIR 119 10 12V BULLET488-56403 5923 — — TM-16 G HORIZ PAD DIR 120 8 12V 1 WIRE103-56409 5792T 5051 — TM-16 G HORIZ PAD DIR 135 8 12V BULLET103-56410 51606 — — TM-16 G HORIZ PAD DIR 158.7 1 VG 12V BULLET103-56454 5794T — — TM-16 G HORIZ PAD DIR 135 8 24V BULLET103-56458 51610 — — TM-16 D VERT — DIR 123 8 12V BULLET103-57394 51612 — — TM-21 G HORIZ PAD DIR 125 8 24V 2WMPxxx-67256 51615 — — TM-21HX RH PAD VERT RH PAD DIR 137 PV6 12V 435-67260 5880B (1) — TM-21HX G HORIZ PAD DIR 125 8 12V 2 WIRE103-67262 5881B (1) — TM-21HX G HORIZ PAD DIR 125 8 24V 2 WIRE103-67269 5927 — — TM-21 G HORIZ PAD DIR 141 10 12V 2WMP103-67272 5928 — — TM-21 G HORIZ PAD DIR 141 10 24V 2WMP103-67275 51613 — — TM-21 D VERT — DIR 127 8 12V 2WMP

506011-4703 51422 — — DKV14C — TOP PAD DIR 115 1 24V 506011-6800 51401 — — DKS15CH — TOP PAD DIR 135 1(5/8”) 24V 1 WIRE506011-7441 5851 — — DKS15CH TOP PAD @ 1:00 (single bolt) DIR 138 1-B 24V KOMATSU506011-7980 51402 — — DKS15CH — TOP PAD DIR 135 1(5/8”) 24V 1 WIRE506011-8241 51424 — — DKS15CH — TOP PAD EAR 5.3” 1 12V

506011-9910 51402 — — DKS15CH — TOP PAD DIR 135 1(5/8”) 24V 1 WIRE— 5924 — — TM-31 — — — — — 12 12V —— 51604 — — TM-31 — — — DIR — 12 24V —46215889 51414 — — DKS15CH — — H PAD DIR 139 1(5/8”) 24V —

897161173-1 51424 — — DKS15CH — TOP PAD EAR 5.3” 1 12V898037147-1 51425 — — DKS15D — TOP PAD DIR 5.26” 1 12V42W0711280 51426 — — DKS15CH — PAD DIR 5.3” 1 12V8708581 51427 — — DKS15CH — PAD DIR 4.92” 2 24V11006431

CO

MP

RE

SS

OR

S


5711 ...........Valeo 5711Q .......QUE Mfg. R134aModel Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 D xxx-45011

5722 R134aModel Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 B xxx-45021

5415 R134aModel Mount ClutchTM16 Ear 2gr 4.9”Volt Head OE#12 D xxx-46043

5414 R134aModel Mount ClutchTM16SHD Ear 2gr 5.9”Volt Head OE#24 D xxx-46100

5723 R134aModel Mount ClutchTM15 Ear 1-vg 6 1/4”Volt Head OE#12 D xxx-45065

5728 R134aModel Mount ClutchTM15 Ear 1-vg 6 1/4”Volt Head OE#12 E xxx-45094

5724 R134aModel Mount ClutchTM15 Ear 1-vg 6 1/4”Volt Head OE#24 B xxx-45057


Listed in ascending order by part number. For Manifold Identification see page 313.

THERE ARE FIVE (5) TYPES OF NUMBERS THAT CAN BE FOUND ON THE LABELOne of these is Required to Identify the Compressor Assembly488-xxxxx (older models) example: 488-45011435-xxxxx (newer models) example: 435-55011100-xxxxx (newer models) example: 100-55011103xxxxx (newer models-Valeo brand) example: 10355011252xxxx (ICE brand) example: 2521152

Part Number Label

2521152

10055011SAME AS

488-45011

435-55011SAME AS

103-55011SAME AS

Part Number Label

GrooveWidth

Diameter

A-BDistance

Must have a number label to I.D. the compressorassembly.

NOTE

May be supplied with aluminum manifold.





CO

MP

RE

SS

OR

S

320


5760 ...........Valeo 5760Q .......QUE Mfg. R134aModel Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 C xxx-45030

5763 R134aModel Mount ClutchTM15 Ear 1gr 4.9”Volt Head OE#12 D xxx-45063

5768 R134aModel Mount ClutchTM15 Direct 6gr 5”Volt Head OE#12 D xxx-45088

5765 R134aModel Mount ClutchTM15 Direct 1gr 6 1/4”Volt Head OE#24 C xxx-45081


5732 R134aModel Mount ClutchTM15 Ear 2gr 5”Volt Head OE#12 B xxx-45043

5733 R134aModel Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 E xxx-45023

5753 Universal R134aModel Mount ClutchTM15 Ear 1gr 6 1/4”Volt Head OE#12 G xxx-45226

5751 Universal R134aModel Mount ClutchTM15 Ear 2gr 5”Volt Head OE#12 G xxx-45222

5750 R134aModel Mount ClutchTM15 Ear 1gr 6 1/4”Volt Head OE#24 C xxx-45073

5734 R134aModel Mount ClutchTM15 Ear 1gr 6 1/4”Volt Head OE#24 D xxx-45061

5755 R134aModel Mount ClutchTM15 Ear 6gr 5”Volt Head OE#12 C xxx-45068


3-17/32”(90mm)

3-1/16” (78mm)

5757 R134aModel Mount ClutchTM15 Ear 6gr 5”Volt Head OE#12 D xxx-45019

5766 R134aModel Mount ClutchTM15 Direct 8gr 5”Volt Head OE#12 D xxx-45082

5767 R134aModel Mount ClutchTM15 Direct 8gr 5”Volt Head OE#12 C xxx-45084

GrooveWidth

Diameter

A-BDistance





3-1/16” (78mm)

3-17/32”(90mm)


CO

MP

RE

SS

OR

S


3-5/8”(92mm)

3-7/16” (87mm)

5769 R134aModel Mount ClutchTM15 Direct 2gr 5 1/4”Volt Head OE#12 D xxx-45092

5777 R134aModel Mount ClutchTM15 Direct 2gr 5 1/4”Volt Head OE#24 D xxx-45090

5778 w/Diode R134aModel Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 D xxx-45069





5783 R134aModel Mount ClutchTM15 Ear 8gr 5”Volt Head OE#12 C xxx-45122



5787 R134aModel Mount ClutchTM15 Ear 6gr 5”Volt Head OE#12 F xxx-45097

5791 ...........Valeo 5791Q .......QUE Mfg. R134aModel Mount ClutchTM16 Ear 2gr 5 1/4”Volt Head OE#12 D xxx-46011

5789 R134aModel Mount ClutchTM15 Ear 2gr 5”Volt Head OE#12 F xxx-45075

5790 R134aModel Mount ClutchTM16 Ear 2gr 5 1/4”Volt Head OE#12 C xxx-46030


5792T Universal R134aModel Mount ClutchTM16 Direct 2gr 5.3”Volt Head OE#12 G xxx-56409

5793 R134aModel Mount ClutchTM16 Ear 1-OH 4.9”Volt Head OE#12 D xxx-46063









CO

MP

RE

SS

OR

S

322

5805W Universal R134aModel Mount ClutchTM16 Ear 8gr 4.8”Volt Head OE#12 G xxx-46244

w/o diode

5805E R134aModel Mount ClutchTM16 Ear 8gr 123mmVolt Head OE#12 E xxx-46124

3-5/8”(92mm)

3-7/16” (87mm)


5804 Universal R134aModel Mount ClutchTM16 Ear 1-vg 6 1/4”Volt Head OE#24 G xxx-46228

5805 .........Valeo5805Q .......QUE Mfg. R134aModel Mount ClutchTM16 Ear 8gr 4.8”Volt Head OE#12 G xxx-46234

5803 Universal R134aModel Mount ClutchTM16 Ear 1-vg 6 1/4”Volt Head OE#12 G xxx-46226


5799 R134aModel Mount ClutchTM16 Ear 1-vg 6 1/4”Volt Head OE#12 E xxx-46094

5795 R134aModel Mount ClutchTM16 Ear 1-vg 6 1/4”Volt Head OE#12 D xxx-46065




5798 R134aModel Mount ClutchTM16 Ear 2gr 5 1/4”Volt Head OE#12 B xxx-46021


5797 R134aModel Mount ClutchTM16 Ear 2gr 5 1/4”Volt Head OE#12 D xxx-46077,78

5794T Universal R134aModel Mount ClutchTM16 Direct 2gr 5.3”Volt Head OE#24 G 103-56454

5805D R134aModel Mount ClutchTM16 Ear 8gr 4.8”Volt Head OE#12 D xxx-46120

5805C ......... Valeo 5805QC ..... QUE Mfg. R134aModel Mount ClutchTM16 Ear 8gr 4.8”Volt Head OE#12 C xxx-46122








CO

MP

RE

SS

OR

S


5825 R12Model Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#24 A xxx-25015


5807 Universal R134aModel Mount ClutchTM16 Ear 1-OH 4.9”Volt Head OE#12 G xxx-46230




5810 R134aModel Mount ClutchTM16SHD Ear 2gr 6”Volt Head OE#12 G xxx-46204

5811 R12Model Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 A xxx-25011

5813 R134aModel Mount ClutchTM16 Ear 2gr 5.3”Volt Head OE#12 B xxx-46321

5823 R12Model Mount ClutchTM15 Ear 1-vg 6 1/4”Volt Head OE#12 A xxx-25065

5822 R12Model Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head OE#12 B xxx-25021


w/o diode

5851 R134aModel Mount ClutchDKS15CH Direct 1 gr 138mmVolt Head Komatsu24 Pad(1:00) 506011-7441

5806HD Universal R134aModel Mount ClutchTM16 Ear 8gr 5.1”Volt Head OE#24 G xxx-46225

3-1/4” 5/8” Belt

STYLE 1(see p. 312) 2-1/4”

5 oz. PAG100

5863 R12Model Mount ClutchTM15 Ear 1-OH 4.9”Volt Head OE#12 A xxx-25063




5878 R12Model Mount ClutchTM15 Ear 2gr 5 1/4”Volt Head ICE#12 A xxx-25078

5923 R134aModel Mount ClutchTM 16 Direct 8gr 4.7”Volt Head OE#12 G xxx-56403

5923A ......Valeo5923AQ ...QUE Mfg. R134aModel Mount ClutchTM16 Direct 8gr 4.7”Volt Head OE#12 G xxx-56282

3-5/8”(92mm)

3-7/16” (87mm)

3-5/8”(92mm)

3-7/16” (87mm)



CO

MP

RE

SS

OR

S

324

51608 R134aModel Mount ClutchTM16 Ear 1vg 159mmVolt Head OE#24 D xxx-46057

51609 R134aModel Mount ClutchTM16SHD Ear 1-vg 159mmVolt Head OE#12 D xxx-46050

51610 R134aModel Mount ClutchTM16 Direct 8gr 123mmVolt Head OE#12 D xxx-56458

3-5/8”(92mm)

3-7/16” (87mm)

COMPRESSORS — SELTEC / VALEO / ZEXELListed in ascending order by part number. For Manifold Identification see page 313.

3-1/4” 3-1/4”

3-1/4” 3-1/4” 2-1/4” 2-1/4”

3-1/4”

2.08”

51401 R134aModel Mount ClutchDKS15CH Direct 1 gr 135mmVolt Head OE#24 Top Pad 506011-6800

51402 R134aModel Mount ClutchDKS15CH Direct 1 gr 135mmVolt Head OE#24 Pad 506011-9910; -7980

51424 ISUZU NPR R134aModel Mount ClutchDKS15CH Ear 1 gr 5.3”Volt Head OE#12 Pad 8-97161-173-1 ZEXEL 506011-8241

51425 ISUZU W550 SeriesModel Mount ClutchDKS15D Direct 1 gr 5.26”Volt Head OE#12 Pad 8-98037-147-1

51426 Volvo R134aModel Mount ClutchDKS15CH Direct 1 gr 5.3”Volt Head OE#12 42W-07-11280

51427 Volvo R134aModel Mount ClutchDKS15CH Direct 2 gr 4.92”Volt Head OE#24 PAD 11006431 ZEXEL 8708581

51605 R134aModel Mount ClutchTM16 Direct 10gr 119mmVolt Head OE#12 G xxx-56400

3-5/8”(92mm)

3-7/16” (87mm) 51606

Model Mount ClutchTM16 Direct 1 vg 158.7mmVolt Head OE#12 G xxx-56410

3-5/8”(92mm)

3-7/16” (87mm)

51607 R134aModel Mount ClutchTM16SHD Ear 2gr 152mmVolt Head Seltec#12 D xxx-46041

5/8” belt 5/8” belt

STYLE 3(see p. 312)

5oz. PAG100

STYLE 2(see p. 312)

51414 R134aModel Mount ClutchDKS15CH Direct 1gr 139mmVolt Head O.E.M.#24 Top Pad 46215889

5/8” belt

J.Deere

5oz. PAG100

STYLE 4(see p. 312)

51422 PAG 100 Model Mount ClutchDKV14C Direct 1gr 115mmVolt O.E.M.#24v ZEXEL 506011-4703




1/2” belt

51417 ISUZU NPR R134aModel Mount ClutchDKS15D Ear 1gr 140mmVolt O.E.M.#12 (splined shaft)

3.5 ozPAG10051205

Model Mount ClutchDKS20DT Direct 4gr, 4.3” dia.Volt O.E.M.#12 BL3Z-19703A CL34-19D629AA

Ford Trucks

ZEXEL

ZEXEL

ZEXEL

ZEXEL ZEXEL

CO

MP

RE

SS

OR

S


5934 R134aModel Mount ClutchTM08 Ear 2gr 135mmVolt ICE# OE#12 2521136 xxx-42021

5932 R134aModel Mount ClutchTM08 Altrntr 4gr 123mmVolt ICE# OE#12 2521261 xxx-42080

Alternator mount 3 hole 5933 R134a

Model Mount ClutchTM08 Altrntr 6gr 123mmVolt Head OE#12 Special xxx-42081

Alternator mount 3 hole

Alternator mount 3 hole5931 R134a

Model Mount ClutchTM08 Altrntr 2gr 135mmVolt Head OE#12 Top xxx-42017


TM 08

69mm89mm

reversed fitting

51614 R134aModel Mount ClutchTM16SHD Ear 2gr 152mmVolt Head OE#24 G xxx-46048

51617 R134aModel Oil ClutchTM55HD PAG100 8gr 196mmVolt Head OE#12 Z0015658A

51611 R134aModel Mount ClutchTM16 Direct 10gr 119mmVolt Head OE#12 Inverted O/R xxx-56401

3-5/8”(92mm)

3-7/16” (87mm)




51616 R134aModel Mount ClutchTM08HD Ear 2gr 135mmVolt Head CAT#12 PAD 276-9875

1/2” Belt Width


CO

MP

RE

SS

OR

S

326

3-5/8”(92mm)

3-7/16” (87mm)

3-5/8”(92mm)

3-7/16” (87mm)

5879 R134aModel Mount ClutchTM21HX Direct 2gr 145mmVolt Head OE#24 G xxx-47242

5879G R134aModel Mount ClutchTM21HX Direct 2gr 145mmVolt Head OE#24 G xxx-47242


5877G R134aModel Mount ClutchTM21HX Direct 2gr 145mmVolt Head OE#12 G xxx-47240

5880 gold clutch 51mm gauge lineModel Mount ClutchTM21HX Direct 8gr 141mmVolt Head OE#12 G xxx-47244

5880G 51mm gauge lineModel Mount ClutchTM21HX Direct 8gr 141mmVolt Head OE#12 G xxx-47244

5880B black clutch

5880BD w/diode 49mm gauge lineModel Mount ClutchTM21HX Direct 8gr 125mmVolt Head OE#12 G xxx-67260

5880BG black clutch 49mm gauge lineModel Mount ClutchTM21HX Direct 8gr 125mmVolt Head OE#12 G xxx-67260

TM21 / TM21HX

5881 51mm gauge lineModel Mount ClutchTM21HX Direct 8gr 141mmVolt Head OE#24 G xxx-47246

5881B black clutch 49mm gauge lineModel Mount ClutchTM21HX Direct 8gr 125mmVolt Head OE#24 G xxx-67262

5881G black clutch 49mm gauge lineModel Mount ClutchTM21HX Direct 8gr 125mmVolt Head OE#24 G xxx-67262

5927 2 wire w/diode R134aModel Mount ClutchTM21 Direct 10gr 141mmVolt Head OE#12 G xxx-67269

5927G 2 wire w/diode R134aModel Mount ClutchTM21 Direct 10gr 141mmVolt Head OE#12 G xxx-67269

5928 2 wire w/diode R134aModel Mount ClutchTM21 Direct 10gr 141mmVolt Head OE#24 G xxx-67272

3-5/8”(92mm)

3-7/16” (87mm)

3-5/8”(92mm)

3-7/16” (87mm)

3-5/8”(92mm)

3-7/16” (87mm)

3-5/8”(92mm)

3-7/16” (87mm)

3-5/8”(92mm)

3-7/16” (87mm)


51612 w/diode R134aModel Mount ClutchTM21 Direct 8gr 125mmVolt Head OE#24 G xxx-57394

3-5/8”(92mm)

3-7/16” (87mm)



(Aftermarket)

(Aftermarket) (Aftermarket)

(Aftermarket)

(Aftermarket)

(Aftermarket)

2 wire DEUTZ

CO

MP

RE

SS

OR

S


SELTEC TM31HD DISCH .....10 ......16MM ..... 5438STD. FLOW PORTS SUCT .....12 ......13MM ..... 5439

Lo Side

Hi Side

58965896V GENUINE VALEO R134aModel Mount ClutchTM31 Direct 2gr 6”Volt ICE# OE#2 2521209 xxx-46500




5900 5900V GENUINE VALEO R134aModel Mount ClutchTM31 Direct 2gr 6”Volt ICE# OE#24 2521212 xxx-46530

5899 5899V GENUINE VALEO R134aModel Mount ClutchTM31 Direct 8gr 6”Volt ICE# OE#12 2521213 xxx-46540

5904 R134aModel Mount ClutchTM31 Direct 10gr 6”Volt OE#24 xxx-46570


SELTEC TM31 Only

COMPRESSOR TYPE COMP. HOSE PORT PART FTG. FTG. SIZE NO.


(uses #0115 o’ring)



13mm port16mm port50031TM31/VC31 Sight Glass (Set of 2)

1/2” Belt Width

1/2” Belt Width

5/8” Belt Width 5/8”

Belt Width

TM21 / TM21HX (continued) TM31 / VC31

51613 R134aModel Mount ClutchTM21 Direct 8gr 127mmVolt Head OE#12 D xxx-67275

3-5/8”(92mm)

3-7/16” (87mm) 51615 R134a

Model Mount ClutchTM21HX Direct 6gr 137mmVolt Head OE#12 RH Pad xxx-67256

Pressure Relief Valve

3/8”-24

5685PRV - Universal (R12 & R134a) Denso 10PA17C, Seltec, GM HT6Bleeds off excessive refrigerant pressure in excess of 400 p.s.i.



CO

MP

RE

SS

OR

S

328

COMPRESSORS — SELTEC (Universal Style)

IMPORTANT: Universal Style is equipped with Style G type rear pad head - MANIFOLD REQUIRED.

1 GROOVE - EAR MOUNT

Diameter Volt Model Part#

125 mm / 4.9” 12v TM-16 5807 1

158 mm / 6.25” 12v TM-15 5753 2

158 mm / 6.25” 12v TM-16 5803 2

158 mm / 6.25” 24v TM-16 5804



127 mm / 5.0” 12v TM-15 5751

127 mm / 5.0” 12v TM-16 5808

127 mm / 5.0” 12v TM-16 5809 3

132 mm / 5.25” 12v TM-15 5780

132 mm / 5.25” 12v TM-16 5792

132 mm / 5.25” 24v TM-15 5781

132 mm / 5.25” 24v TM-16 5794



127 mm / 5.0” 12v TM-15 5782

127 mm / 5.0” 12v TM-16 5801

127 mm / 5.0” 24v TM-16 5802



127 mm / 5.0” 12v TM-15 5779

127 mm / 5.0” 12v TM-16 5805

123 mm / 4.8” 12v TM-16 5805W 3

127 mm / 5.0” 24v TM-16 5806

132 mm / 5.1” 24v TM-16 5806HD

NOTE: 1 - Over Hang Clutch 2 - Variable Groove 3 - Supplied with 2 wire Metripak Connector

Leaf-Spring Type Clutch

STYLE G UNIVERSAL Horizontal GM Pad Head

2 GROOVE - DIRECT MOUNT


135mm / 5.25” 12v TM-16 5792T

135mm / 5.25” 24v TM-16 5794T

8 GROOVE - DIRECT MOUNT


123mm / 4.8” 12v TM-16 5923A

123mm / 4.8” 24v TM-16 5806T


Diameter Volt Model Part No.

123mm/4.8” 12v TM-16 51601

123mm/4.8” 24v TM-16 51602

Compressor with Clutch

Plus Manifold

Compressor Assembly=+

MANIFOLD - REQUIRED (choose correct style for above compressors; see next page)

CO

MP

RE

SS

OR

S


(Universal Style) SELTEC — COMPRESSORS

UNIVERSAL Horizontal GM Pad Head uses Bolt-on Manifolds

STYLE G

TECHTIP

BOLT-ON Manifolds Identification - for Pad Mount Horizontal Style “G” Heads

• O’ring between manifold and compressor: Part #0117.

• Manifold Bolt: use torque wrench 17-24 ft. lbs.

5208 Universal Manifold#10 x #12 Male Insert O’ring FittingsFits: Sanden, Seltec Compressors.

#10#12

5206 Universal Swivel Manifold#8 x #10 Male Insert O’ring FittingsFits: Sanden, Seltec, A6 Compressors.

#8#10

STYLE A

STYLE D

STYLE F

STYLE C

STYLE I

5590 ..............Forged Steel5590A ...........AluminumVertical 3/4” x 7/8”w/R12 Charging PortsSingle Bolt Application

STYLE E

5593 ..............Forged Steel5593A ...........AluminumVertical 1”-14 Tube-Ow/o Charging PortsSingle Bolt Application

5597 ..............Forged Steel5597A ...........AluminumInverted Vertical 3/4” x 7/8” Male w/o Charging PortsSingle Bolt Application-Bus

5591 ..............Forged SteelHorizontal 3/4” x 7/8” Single Bolt Application

5594 ..............Forged Steel5594A ...........AluminumHorizontal 1”-14 Tube-Ow/o Charging PortsSingle Bolt Application

5592 ..............Forged SteelVertical 3/4” x 7/8”w/o Charging PortsSingle Bolt Application

#10#8

Manifold Not Reversible

#10 #8

#10#8

5591A ...........AluminumHorizontal O’ring (3/4” x 7/8”)Single Bolt Application

5592A ...........AluminumVertical O’ring (3/4” x 7/8”) w/o Charging PortsSingle Bolt Application

#10 #10#8 #8

#10

seltec / valeo — compressorsbasic seltec/valeo compressor specifications acceptable mounting...

Documents