sem - vi: mech / auto · sem - vi: mech / auto there won’tbe any other batch apart from these for...

Sem - VI: Mech / Auto

There won’t be any other Batch apart from these for Sem - VI

Subject Batch Type By Starts At Fees Note

Machine Design - I(G)

Record marks of 95/100 was scored by our

student: Siddharth Bhat – D J Sanghvi

VCR Batch

Vacation cum Regular Batch

Irfan sir 20th Dec’17 Dadar

Batch code: E 8000*

Vacation Period: 55% of the syllabus will be completed.

Regular Period: 45% of the syllabus will be completed.

Detailed schedule is given on Pg - 3

Mech. Vibration(G)

Record marks of 96/100 was scored by our

student: Omkar Nerurkar - K J Somaiya

6 hrs/week : Total = 102 hrs

Syllabus completes before VIVA starts.

Regular 1st Batch

Irfan sir 11th Jan’18

(Every Thursday)

6:30pm to 9:45pm

Dadar Batch code: B

8500*

Extra Lectures for both the Batches will be on every Sunday

Slot - A: 4:15pm to 7pm

or

Slot - B: 7pm to 9:45pm

Student needs to specify the preferred slot for extra lecture at the time of admission

Regular 2nd Batch

Irfan sir 13th Jan’18

(Every Saturday)

8:45am to 12noon

Dadar Batch code: F

F.E.A

Record marks of 92/100 was scored by our student: Shivchandra Walke - Thakur College

Vacation Sanjay sir 20th Dec’17

Details on Pg - 4

Dadar Batch code: G

8500*

Special session on Ansys Software (WorkBench & APDL) will be taken to help students in their Practical Exam

Regular Sanjay sir

10th Jan’18 (Every Wednesday)

6:30pm to 10pm

Dadar Batch code: H

14th Jan’18 (Every Sunday)

8am to 11:30pm

Borivali Batch code: K

12th Jan’18 (Every Friday)

6:30pm to 10pm

Thane Batch code: L

Mechatronics

Record marks of 90/100 was scored by our student: Anirudh Iyer - DBIT

Public Holiday Batch

Sanjay sir 26th Jan’18 (Republic Day)

Dadar Batch code: M 5500* Detailed schedule is given on Pg - 5

T.F.P.E(G)

Outstanding marks of 93/100 was scored by our student: Ankita Sheoran - VECT: May’17 Crash

Crash Batch Irfan sir April 2018

(11 lec x 4hrs)

Dadar Batch code: N 6000*

Tentative Lecture Plan is given on Pg - 6

Final Timetable will be uploaded in Mar’18

* The fees given above, apply to the student joining that single subject only. Students joining more than one subject will be getting the benefit of discounted fees. Details given on Pg - 2.

The superscript (G) written on the subjects represent that, these are the Core Foundation subjects for GATE, IES Exams, Placement Interviews etc. Many of the Higher Semester Subjects require concepts of MD-1, Mech. Vibration and TFPE.

Note: Colleges start from 8th Jan’18. Exams would start from 8th May’18. It is always better for a student to join certain subjects in Vacation, certain in Regular, certain on Public Holidays and certain in Crash

so as to distribute the pressure, make proper utilisation of time and smartly prepare for the most heavy semester of Mechanical Engineering. All varieties of Concepts, Derivations & Numericals would be taken in the class. Full set of Revised & Updated Notes for May’18 Exam would be provided. There won’t be any change in the timetable.

The timetable has been designed, so that none of the batches of a particular semester would ever clash with each other. The Batches have been designed not only to help the student clear the paper but also to top his/her respective college and excel in all the competitive examinations like GATE, IES, UPSC, Engineering

Olympiads etc along with confidently facing Technical Interviews at the time of placement.

Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w).

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | Whatsapp: 9820341855

Discounted Fees:

Sem - VI: Mech / Auto

Combo Subject Combo Discounted Fees

1 MD - I + Mech. Vibration 7200 + 7500

2 MD - I + Mech. Vibration + F.E.A 7200 + 7500 + 7200

3 Mech. Vibration + F.E.A 7500 + 7500

4 Mech. Vibration + F.E.A + T.F.P.E 7500 + 7200 + 5500

5 MD - I + Mech. Vibration + T.F.P.E 7000 + 7500 + 5200

6 Mech. Vibration + FEA + Mechatronics + T.F.P.E 7500 + 7200 + 5000 + 5500

7 MD - I + Mech. Vibration + FEA + Mechatronics + T.F.P.E 7000 + 7500 + 7000 + 4800 + 5000

Note:

There is no compulsion of joining all the subjects of any particular Combo together. Admission for the remaining subjects can be taken at a later stage as well (provided seats are available), if you don’t want to take it now.

As and when the student joins the remaining subjects of any particular combo, he/she would be getting the entire benefit of the discounted fees then.

Admission Details

Admission started for all the batches of the new semester and it will be conducted only at Dadar (address given below). Call on

9820341855 to fix up an appointment. Admission can be taken from the comfort of your home by doing online payment. Fees can be paid by Cash / Debit card / Credit Card / Online Fund Transfer / UPI or by Cheque in favour of “COURSENX EDUTECH

PRIVATE LIMITED”. Students will be asked to show their College I-card in the second lecture for Verification purpose. If you cannot come for the admission for any reason, then you can pay the fees either by transferring funds or depositing cash as per the

following details;

Name: COURSENX EDUTECH PRIVATE LIMITED Current Account no: 124805000652

ICICI Bank, S. V. Road Branch, Santacruz (w), Mumbai.

RTGS / NEFT / IFSC code: ICIC0001248

Note:

Fees can also be paid via (Paytm on Mobile no: 9820341855) or (BHIM App on Mobile no: 9920704691) Once you have made the payment, please send the Pic of the Receipt / Acknowledgement of fund transfer either on

Whatsapp (9820341855) or mail it to us at [email protected] along with the following details;

Full Name of the student: College: Mobile no: Email id: Address: Subjects you want to join and its Batch codes (given in the timetable copy):

We would keep your I-cards aside. You can collect it from the staff when you come for the 1st lecture, by submitting the printout of the Receipt /Acknowledgement of Fund transfer / Deposit or showing the Pic / Sms of the same on your Mobile phone.

Admission can be taken on the 1st lecture also (provided seats are available). But the fees will be accepted only in cash.

Office Address: Room - 112, 1st floor, Pearl Centre, Tulsi Pipe Road, Senapati Bapat Marg, Above Sadguru’s office, Dadar (w) Once out of Rly. station, take immediate left (5 mins of walking distance)

Pg - 2 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Machine Design - I Sem - VI: Mech & Auto

Perfectly Crafted Schedule of VCR (Vacation cum Regular) Batch only at Dadar for May’18 Exam

Completing 100% Syllabus during Vacation period makes it difficult for the student to recall the latter part of the syllabus during their 2nd UT and End Sem Exam, hence we have designed an Effective VCR Batch

Lec Date Day Syllabus Covered Time During

1 20th Dec’17 Wed Development of Machine Design Concepts: Material concepts, Stress

analysis, FOS & Failure theories. Design of all types of Cotter Joint (Static Approach)

Socket & Spigot type. Gib & Cotter type. Sleeve & Cotter type.

Design of Knuckle Joint (Static Approach).

5:3

0p

m -

9:3

0p

m

Vacati

on

Peri

od

55

% s

yll

ab

us

cov

ere

d

2 21st Dec’17 Thurs

3* 22nd Dec’17 Fri

4 23rd Dec’17 Sat Design of “Adjustable Screwed Joint / Turn-Buckle”

(Static Approach)

5 24th Dec’17 Sun Coupling Design (Static Approach)

Flanged Coupling (Protective & Un-protective type) Flexible Coupling (Bush Pin type) Muff Coupling. Split Muff Coupling - Clamp coupling.

6 25th Dec’17 Mon

7 29th Dec’17 Fri Design of “Bolted & Riveted Joints” (Static Approach)

Concept Development. All types of Design Questions covered. 8 30th Dec’17 Sat

9# 1st Jan’18 Mon Design of “Welded Joints” (Static Approach)

Concept Development. All types of Design Questions covered.

10 2nd Jan’18 Tue Design of “Power Screws”

Concept Development. Screw Press Design. C - clamp Design.

Design of Screw Jack - Bottle type Design of Screw Jack - Toggle type

11 3rd Jan’18 Wed

12 23rd Jan’18 Tue Design of “Thick Cylinders” & “Curved Beams”

7:1

5p

m -

9:3

0p

m

Regu

lar

Peri

od

45

% s

yll

ab

us

cov

ere

d

13 30th Jan’18 Tue Design of components subjected to “Fluctuating Loads” (Fatigue Approach)

Concept Development: Variable Stresses, Fatigues failure, Endurance limit, Soderberg line, Goodman line & Gerber line.

All types of Design Questions covered.

14 6th Feb’18 Tue

15 13th Feb’18 5:30pm to 9:30pm

Mahashivratri

16 20th Feb’18 Tue Design of “Closed Coiled Helical Springs”

Concept Development & Wahl’s line Analysis. Using “Static Approach”. Using “Soderberg Equation”

17 27th Feb’18 Tue

18 6th Mar’18 Tue

19 13th Mar’18 Tue Design of “Semi - Elliptical Springs”

20 3rd Apr’18 Tue Design of “Power Transmitting Shafts” (With elements like Flat & V - Belt Pulleys, Spur & Helical Gear)

Using “ASME code”. Using “Soderberg Equation”

21 10th Apr’18 Tue

22 17th Apr’18 Last Lecture

Tue

* Timing will be from 9am to 1pm. #

Timing will be from 5pm to 9:30pm 24 x 7 Doubt Solving

Note: Please bring “PSG Design Data Handbook - Latest Version” in the 1st lecture (available at all leading Book stalls).There won’t be any other batch apart from this (i.e. there

won’t be any Regular or Crash Batch for MD - 1). College re-opens on 8th Jan’18, Term ends on 21st Apr’18 and Exam starts on 8th May’18.

The lecture content of VCR Batch has been thoughtfully designed by Irfan sir, so that the lectures does not become heavy for the student (as none of the lectures will be

of more than 4 to 4.5 hrs) and at the same time the subject gets comfortably prepared, giving sufficient time for Revision and Doubt solving. No need to come for any uncertain / unplanned lectures before or during UT or during Term End or VIVA period. So no wastage of your precious time.

All varieties of Concepts and Design based questions would be taken in the class. Full set (Theory Notes + Diagram set + SP set + Concept booklet + Q. Set) of Revised & Updated notes for May’18 Exam would be provided. There won’t be any change in the timetable. The timetable has been designed so that, none of the Sem - VI batches would ever clash with each other. No other class completes the huge syllabus of MD-1 on time. Many of them don’t even have a proper plan for it. It is recommended that, you do a bit of research before you join any class. This batch has a track record of maximum number of students scoring 20/20 in both their UT’s and helping them score exceptionally well in their End Sem Exam and builds a strong base for MD-2 (Sem - VII) and DMS (Sem - VIII).

Record Marks scored by our students in MDI: Siddharth Sanjay Bhat (95/100, D J Sanghvi - May’16) │ Abdul Moiz (93/100, M.H.S.S - May’17) │ Adnan Tinwala (92/100, M.H.S.S - May’16) │ Amin B Sayyed (90/100, Bharat College - May’16) │ Arshad Shaikh (90/100, M.H.S.S - May’15).

Last year, 25% of our students scored more than 18/20 in their UT. More than 40% of the students scored Grade - 10/10. All our students cleared the paper. On an average, 3 out of top 5 students of every college were from our batch.

Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w).

Once out of Rly. Station (west side); take immediate right, 5 mins walking distance. Pg - 3

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Note:

• For practical Examination, Special session on ANSYS software (Workbench & APDL) will be Conducted.

• 100% syllabus will be covered in Vacation.

• Full set of Updated Notes (For May 2018 Exam) will be provided.

• All typical questions from the Revised Papers (up to Dec 2017) would be solved in the class.

LECTURE Date Time TOPICS COVERED

1 20/12/17 1:30 pm to 5 pm

✓ Introduction to FEA ✓ Non Weak Form

Numericals on -

• Galerkin Method

• Petrov-Galerkin Method

• Subdomain Method

• Least Square Method

• Collocation Method ✓ Comparison with Exact Method

2 21/12/17 1:30 pm to 5 pm ✓ Non Weak Form ----- Continued ✓ Trigonometric Function

3 22/12/17 1:30 pm to 5 pm ✓ Weak Form

• R-R Method Mapped over Entire Domain

• Two Parameter / One Parameter Solution

4 23/12/17 1:30 pm to 5 pm ✓ Weak Form

• R-R Method Mapped over Finite (General) Element

• Derivation of EME for various Field of applications

5 24/12/17 1:30 pm to 5 pm ✓ Weak Form ----- Continued

6 25/12/17 1:30 pm to 5 pm ✓ Direct Application of EME

Analysis of 1. Stepped Bar 2. Tapered Bar

7 26/12/17 1:30 pm to 5 pm ✓ Direct Application of EME

Analysis of 3. Spring Cart systems 4. Fluid Flow Network

8 27/12/17 1:30 pm to 5 pm

✓ Direct Application of EME Analysis of 5. Stepped Bar subjected to Torsion

6. Stepped Bar subjected to Thermal Effect 7. Heat Transfer by Conduction 8. Heat Transfer by Conduction & Convection

9 28/12/17 1:30 pm to 5 pm ✓ Truss Analysis • Concept & Numerical

10 29/12/17 1:30 pm to 5 pm ✓ Beam Analysis • Concept & Numerical

11 30/11/17 1:30 pm to 5 pm

✓ Shape Functions for 1D Element Derivations of Shape Function for Linear, Quadratic & Cubic elements by-

• Conventional Method • Serendipity Method • Lagrange’s Polynomial Method

12 01/01/18 1:30 pm to 5 pm

✓ 2D Finite Element Analysis Derivations of Shape Functions for

• 3 Noded Triangular Element • 4 Noded Rectangular Element

13 02/01/18 1:30 pm to 5 pm


• 4 Noded Quadrilateral Element • 8 Noded Quadrilateral Element • 6 Noded Triangular Element (NCS & Area Co-ordinates)

14 03/01/18 1:30 pm to 5 pm


• 9 Noded Quadrilateral Element ✓ Numerical on Stress Stain Analysis ✓ Concept of Jacobian Matrix

15 04/01/18 1:30 pm to 5 pm ✓ Vibration Analysis Numerical on 1. Consistent Mass Matrix

2. Lumped Mass Matrix

16 05/01/18 1:30 pm to 5 pm ✓ Variational Form of D.E. – Numericals ✓ Potential Energy Approach for Spring Elements – Numericals

FEA VACATION BATCH SCHEDULE

Pg no - 4

SEM VI (MECH):

MECHATRONICS SCHEDULE:

DATE DAY TIME TOPICS

26/01/18 (Republic Day)

FRI 8 am to 1 pm

Pneumatic Systems

• Concept development

• Pneumatic Circuit design for Industrial Automation

13/02/18 (Mahashivratri)

TUE 9 am to 1 pm

Electrical Actuating Systems

• Principle of operation of DC motor

• Modelling of DC motor

• Heat dissipation in DC motor

• Principle of Stepper Motor

19/02/18 (Shivaji Jayanti)

MON 9 am to 1 pm

Electrical Actuating Systems

• Three Phase AC Induction Motor

• Speed control strategies of AC induction motors

• Voice Coil Actuator

• Impedance matching for a part of electromechanical system

29/03/118 (Mahavir Jayanti)

THU 8 am to 1 pm

Electropneumatic Systems


• Electropneumatic Circuit design for Industrial Automation

30/03/18 (Good Friday)

FRI 8 am to 1 pm

Hydraulic Systems

• Regenerative Circuit

• Feed and Traverse Circuit

• Counterbalance Circuit

• Sequencing Circuit

• Meter IN, Meter OUT, Bleed OFF circuit

Electrohydraulic Systems


• Electrohydraulic Circuit design for Industrial Automation

14/04/18 (Ambedkar Jayanti)

SAT 9 am to 1 pm

System Interfacing and Data Acquisition

• Data Acquisition Systems (DAQs)

• Supervisory Control and Data Acquisition (SCADA) *

• Universal Asynchronous Receiver and Transmitter (UART) *

• Data Loggers

01/05/18 (Maharashtra Day)

TUE 8 am to 1 pm

Programmable Logic Controller (PLC)

• Concept development of Ladder Logic Diagram

• PLC for Industrial Process Control

Note: • All Lectures are scheduled on Public Holidays at Dadar West.

• Students should carry Pencil, Color gel pens.

• Simulation of Industrial Automation Circuit Design will be taught through advanced software.

• For Admission Contact: 9820341855.

Sanjay Sir

Deepak Sir

CRASH COURSE (Public Holiday Batch)

Record Marks Anirudh Iyer 90/100

(DBIT)

Pg no - 5

T.F.P.E: Crash batch Designed to give a Boost in your Sem - VI Results

Lec. No. Duration Portion covered

1 4 to 4.5 hrs

Steam Generator: Concepts & Formula Development. Numericals (All typical Exam Questions). Imp. Theory Questions.

2 4 to 4.5 hrs

Steam Nozzle: Theory + Derivation. Concepts & Formula Development. Numericals (All typical Exam Questions).

3 4 to 4.5 hrs

Steam Turbine: Impulse type - De Laval Turbine. Concepts & Formula Development. Theory + Derivation. Numericals (All typical Exam Questions).

4 4 to 4.5 hrs

Compounding of Steam Turbine: Concepts of Velocity & Pressure compounding. Numericals (All typical Exam Questions).

Steam Turbine: Reaction type - Parson’s Turbine. Theory + Derivation. Concepts & Formula Development.

5 4 to 4.5 hrs

Parson’s Turbine: Numericals (All typical Exam Questions).

Gas Turbine: (Closed cycle) Theory + Derivation. Concepts & Formula Development. Numericals.

6 4 to 4.5 hrs

Simple Open cycle Gas Turbine: Concepts + Numericals.

Gas Turbine: (Modified cycle - with Intercooler, Reheater and Regenerator) Concepts & Formula Development. Numericals (All typical Exam Questions).

7 4 to 4.5 hrs

Gas Turbine: Modified cycle - Numericals continued...

Jet Propulsion Engines: Turbojet + Turboprop + Ramjet + Rocket engines Concepts & Formula Development. Numericals on Thrust + Thrust Power + TSFC + Propulsive efficiency +

Propulsive Power etc

8 4 to 4.5 hrs

Impact of Jets: on Flat and Curved plates.

Pelton Wheel (Water Turbine): Theory + Derivation. Concepts & Formula Development. Numericals (All typical Exam Questions).

9 4 to 4.5 hrs

Reaction Turbine: Francis Type. Theory + Derivation. Concepts & Formula Development. Numericals (All typical Exam Questions).

10 4 to 4.5 hrs Thoma’s Cavitation Parameter: Concepts & Numericals. Similarity Relations: Concepts & Numericals. Model Testing: Concepts & Numericals.

11 4 to 4.5 hrs Reaction Turbine: Kaplan Type

Analysis & Numericals

Note: Please bring Steam Table (by R. S. Khurmi), 4 different colour gel pens & highlighters in the 1st lecture. T.F.P.E. paper usually would be 85% to 90% (Numerical + Derivation

based) & 10% to 15% (Theory based). It is the next subject in the series of Thermal and Fluid sciences (after Thermodynamics, Fluid Mechanics, Heat Transfer & I. C. Engine). Concepts developed here would be used to understand Mechanical Utility systems (also known as T.F.P.E-2) in Sem - VII and Refrigeration & Air-Conditioning in Sem - VIII.

Full set of Simplified, Refined and Updated Notes (for May’18 Exam) would be provided during the lectures along with the Solved Problem set. Highest Quality Study material has been prepared by referring to more than 15 Standard Books on the subject and selecting all Typical Numericals from the last 44 University papers, up to the recent paper of Nov’17.

All the concepts required from Thermodynamics and Fluid Mechanics would be revised first and then the new concepts of T.F.P.E. would be explained, so that understanding the subject becomes easy and automatic. There would be 15 mins of Personal Doubt Solving Session at the end of every lecture. Optimum utilisation of Audio/Visual would be made throughout the Crash Course to enhance the level of understanding. All the concepts related to Velocity triangles will be explained in detail. Around 50 marks syllabus of TFPE and 60% syllabus of MUS (Sem - VII) are based on it.

Crash Course has been efficiently designed by Irfan sir so that any type of student can attempt at least 95% of the paper with ease. It has been designed not only to help

the student clear the paper but also to top his/her respective college and excel in all the competitive examinations like GATE, IES, UPSC, Engineering Olympiads etc along

with confidently facing Technical Interviews at the time of placement. Over the years, 90% of the times, University Toppers had been from Irfan sir’s T.F.P.E. Batch.

Outstanding Marks scored by our last year’s Crash Batch student: Ankita Sheoran - 93/100 (VECT - May’17 Exam).

Pg - 6

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

www.irfansir.com | +91 9820341855 | Playstore - Irfan sir: Mech | WhatsApp: 9820341855

sem - vi: mech / auto · sem - vi: mech / auto there won’tbe any other batch apart from these for...

Documents