THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND

MECHATRONIC PRODUCTSim-group.com.au

SEPTEMBER 2017

newsTECHNICALBULLETIN

MITSUBISHI LANCER ABS WARNING LIGHT

Mitsubishi Lancer CJ / CF - 2007 onwardWe have heard an increasing number of Mitsubishi Lancer CJ owners complaining about the ABS warning light illuminating in the central display of their Instrument Cluster. This is one of the common faults presenting when the ABS fails.

Pictured is the ATE MK61 ABS control unit fitted to many late model vehicles from 2007 onwards including the Mitsubishi Lancer CJ series.

Visit www.injectronics.com.au for more information or to book in a repair and to locate your nearest reseller.

Common faults include:

• No communication with scan tool to ABS module• ABS traction light on instrument cluster• Fault codes related to pump voltage fault• C1073 faulty motor drive circuit• C2116 abnormality in power supply voltage in pump motor• Steering wheel cannot be turned, even with key inserted into EIS.

Solution: In some cases it can be as simple as replacing a worn or faulty wheel speed sensor but large majorities are being diagnosed with a faulty ABS control unit. After carrying out all the basic checks including scanning the vehicles system for diagnostic trouble codes, many dealerships are suggesting a complete replacement ABS unit is required. Unfortunately once these vehicles are outside of the warranty period a replacement unit can exceed $2000.Injectronics can offer a cost effective and time saving alternative. Injectronics can remanufacture the customers own MK61 ABS. This also guarantees no programming is required once the unit is refitted to the vehicle, also saving you time and money.

Removal:1. ABS module must be left attached to hydraulic block and motor.2. Before removing the unit from the vehicle, check and record all fault codes.

Supply these and any other diagnostic information when sending unit to Injectronics.

3. Before removing pipes, clean all dust / grit off ABS module and pipes.4. When pipes have been removed, seal all holes in ABS hydraulic block to

ensure no dirt ingress.5. Pack unit very well to avoid damage during transportation.

Injectronics can provide a test and repair service of the customers own Mercedes Benz 7Gtronic (722.9 - 7 Speed) Automatic Transmission Mechatronic Conductor Plate. This unit is fitted to R171 SLK Class, W204 C Class, C209 CLK Class, W211 E Class, C216 CL Class, and W221 S Class vehicles. Common faults include:

• Transmission flaring or slipping between gear changes

• Transmission holding in gear

• Loss of all drive

Our repair service is not only cost effective but saves the customer time, as the vehicle does not need to be taken to a dealership to have a replacement unit programmed.Visit our website Injectronics.com.au for a detailed list of faults. When sending your unit to Injectronics for repair, please ensure all fault codes are recorded and sent with the unit.

Mercedes-Benz 7Gtronic Mechatronic Conductor Plate Repair - TCM7GREP

NOWAVAILABLE

Nissan Navara D40 / Pathfinder R51

EV126GENEGR Valve

TB344COThrottle Body

Volvo S60 / S80 / V70 Holden Astra AH / Cruze JH MK60P

ABSAST60PREPABS Module

Holden Captiva CG / Cruze JG

VS200GENVacuum Solenoid Valve

23119700COEngine Cooling Fan Control Module

Mitsubishi Lancer / Outlander

Mazda RX8 FE 1.3L

GE478Goss Fuel Pump Module

GE475Goss Electric Fuel Pump

Nissan Pathfinder / Terrano R50

Subaru Forester / Outback 2.0L

SC530 Cam Sensor

*Repair service

*Repair service

THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND MECHATRONIC PRODUCTS

news

BMW E46 3 series

BCME46REP General Module

Mercedes Benz W201 / W124 / W126 / W140

CRUSMB1REPCruise Control Module

BMW E46 3 series

DASE46REPDash Instrument Cluster

EBRAKE1REPElectronic Park Brake Module

Renault Scenic J84

BMW E39 5 series / E38 7 series

BMWLCM1REPLight Control Module

BMW E39 5 series

CLIE39REPClimate Control Module

Mercedes Benz W140 / 202 / 208 / 210

CLIW140REPClimate Control Module

Mazda 3 BK / Ford Focus MK60P

ABSMAZ60PREPABS Module

Suzuki Swift FZ MK70

ABSSWIFREP ABS Module

Subaru Impreza WRX EJ20

ECMEJ20REPElectronic Control Module

Ford Transit VM FOMOCO

ECMFOMREPElectronic Control Module

Toyota Tarago 2AZ 2.4L

ECMTARREPElectronic Control Module

Holden Barina Spark MJ

ECMSPAREPElectronic Control Module

ESM03REPElectronic Selector Module

Mercedes W202 / W208 / W210 / W163 / W902

Mitsubishi Outlander ZF 2.4L

ECMOUTREPElectronic Control Module

Mitsubishi Triton MK 3.0L V6

ECMTRIREPElectronic Control Module

Jeep Grand Cherokee WG

ESM02REPElectronic Selector Module

Toyota Rav 4 2.0L

ECMRAVMREPElectronic Control Module

Toyota Landcruiser 1HDFTE ECM

ECM1HDREPElectronic Control Module

Toyota Hilux 2TRFE

ECM2TRREPElectronic Control Module

ECMCELREPElectronic Control Module

Mitsubishi Lancer CE Ford Transit VF / VG

SC401GENCrank Sensor

Ford Ranger / Mazda BT50 / Landrover Defender

SC564GENCrank Sensor

Mitsubishi Pajero / Triton Diesel

TB287GENThrottle Body

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

*Repair service

THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND

MECHATRONIC PRODUCTSim-group.com.au

SEPTEMBER 2017

newsTECHNICALBULLETIN

MITSUBISHI LANCER ABS WARNING LIGHT

Mitsubishi Lancer CJ / CF - 2007 onwardWe have heard an increasing number of Mitsubishi Lancer CJ owners complaining about the ABS warning light illuminating in the central display of their Instrument Cluster. This is one of the common faults presenting when the ABS fails.

Pictured is the ATE MK61 ABS control unit fitted to many late model vehicles from 2007 onwards including the Mitsubishi Lancer CJ series.

Visit www.injectronics.com.au for more information or to book in a repair and to locate your nearest reseller.

Common faults include:

• No communication with scan tool to ABS module• ABS traction light on instrument cluster• Fault codes related to pump voltage fault• C1073 faulty motor drive circuit• C2116 abnormality in power supply voltage in pump motor• Steering wheel cannot be turned, even with key inserted into EIS.

Solution: In some cases it can be as simple as replacing a worn or faulty wheel speed sensor but large majorities are being diagnosed with a faulty ABS control unit. After carrying out all the basic checks including scanning the vehicles system for diagnostic trouble codes, many dealerships are suggesting a complete replacement ABS unit is required. Unfortunately once these vehicles are outside of the warranty period a replacement unit can exceed $2000.Injectronics can offer a cost effective and time saving alternative. Injectronics can remanufacture the customers own MK61 ABS. This also guarantees no programming is required once the unit is refitted to the vehicle, also saving you time and money.

Removal:1. ABS module must be left attached to hydraulic block and motor.2. Before removing the unit from the vehicle, check and record all fault codes.

Supply these and any other diagnostic information when sending unit to Injectronics.

3. Before removing pipes, clean all dust / grit off ABS module and pipes.4. When pipes have been removed, seal all holes in ABS hydraulic block to

ensure no dirt ingress.5. Pack unit very well to avoid damage during transportation.

Injectronics can provide a test and repair service of the customers own Mercedes Benz 7Gtronic (722.9 - 7 Speed) Automatic Transmission Mechatronic Conductor Plate. This unit is fitted to R171 SLK Class, W204 C Class, C209 CLK Class, W211 E Class, C216 CL Class, and W221 S Class vehicles. Common faults include:

• Transmission flaring or slipping between gear changes

• Transmission holding in gear

• Loss of all drive

Our repair service is not only cost effective but saves the customer time, as the vehicle does not need to be taken to a dealership to have a replacement unit programmed.Visit our website Injectronics.com.au for a detailed list of faults. When sending your unit to Injectronics for repair, please ensure all fault codes are recorded and sent with the unit.

Mercedes-Benz 7Gtronic Mechatronic Conductor Plate Repair - TCM7GREP

NOWAVAILABLE

Nissan Navara D40 / Pathfinder R51

EV126GENEGR Valve

TB344COThrottle Body

Volvo S60 / S80 / V70 Holden Astra AH / Cruze JH MK60P

ABSAST60PREPABS Module

Holden Captiva CG / Cruze JG

VS200GENVacuum Solenoid Valve

23119700COEngine Cooling Fan Control Module

Mitsubishi Lancer / Outlander

Mazda RX8 FE 1.3L

GE478Goss Fuel Pump Module

GE475Goss Electric Fuel Pump

Nissan Pathfinder / Terrano R50

Subaru Forester / Outback 2.0L

SC530 Cam Sensor

*Repair service

*Repair service