september 27th portfolio

E M M A L E E S H A L L E N B E R G E RPORTFOLIOdesign

9094 N M a i N S t a p t 46 • B e r r i e N S p r i N g S M i 49103 • 423 .290 .4696 • e M M a l e e @ a N d r e w S . e d u

C O N T E N T SIDENTITY, LOGOS, & STUFF 5

PACKAGING FROM THE INTERNSHIP 39

PHOTOSHOP WORK 45

PART ONEIDENTITY, LOGOS, & STUFF

7BRAND DESIGNClIENt: DECADENCE BAkERy

BuSINESS CARD, lABEl, CupCAkE pACkAGING, & BRoChuRE

8

Janelle BennettOwner/Baker

269.240.37292445 Kruger DrNiles, MI [email protected]

WILL GET PHOTO PRINTED BROCHURE AND BUSINESS CARDS

9

WILL GET PHOTO OF BOX

10 BRAND DESIGNClIENt: DECADENCE BAkERy

BRoChuRE

BROCHURE DESIGN NOT FINALIZED YET

13CoRpoRAtE IDENtItyClIENt: kINDlE (MuSIC BAND)

RIGht pAGE: ButtoNS, StICkERS, t-ShIRtS, & BuSINESS CARD

14

buttons

stickers

I will praise you, O LORD,among the nations; I will singof you among the peoples.

Psalm 108:3

business card

PO Box 325Berrien Springs, MI 49103

269 277 [email protected]

find us on Itunes

www.facebook.com/KindlePraisewww.cdbaby.com/Kindlemusicwww.myspace.com/Kindl3

Kalicia MorrisonKemily MorrisonLevi Longoria

WILL GET PHOTOS OF THIS STUFF

15

I will praise you, O LORD,among the nations; I will singof you among the peoples.

Psalm 108:3

17CoRpoRAtE IDENtItyClIENt: BERRIEN SpRINGS CoMMuNIty lIBRARy

18 CoRpoRAtE IDENtIty ABovE: GEM RESouRCES INtERNAtIoNAl

RIGht pAGE: FIRSt CoNGREGAtIoNAl ChuRCh

19

Their future is in your handsh dfuture is in

donatetoday

21

Pastor

cellwork

emailaddress

815 631 3570815 625 5112

[email protected] Second AvenueSterling, IL 61081

WILL GET PHOTO PRINTED LETTERHEAD, ENVELOPE AND BUSINESS CARDS

22 BRAND DESIGN ClIENt: ClASS pRojECt

23

Made in Emmalee’s mind.

WILL GET PHOTOSHOP THIS DESIGN ONTO A REAL T-SHIRT

25

wake up your bagel

27IDENtItyClIENt: youNG pRoFESSIoNAlS CouNCIl

thIS loGo wAS ChooSEN IN AN oNlINE CoMpEtItIoN BEtwEEN MANy othER DESIGNERS.

IDENtItyClIENt: MEtAl EStABlIShMENt

thIS loGo wAS ChooSEN IN AN oNlINE CoMpEtItIoN BEtwEEN MANy othER DESIGNERS.

28 CoRpoRAtE IDENtItyClIENt: vARIouS ClIENtS

29CoRpoRAtE IDENtItyClIENt: vARIouS ClIENtS

RiverWalkSELF STORAGE

30

DESIGNTHINKING

A Quick Introduction

Adapted by Karen Tilstra, PhDJuly 2012

WILL GET PHOTO PRINTED BOOKLETS

BooklEt DESIGNClIENt: thE jouRNAl oF ApplIED ChRIStIAN lEADERShIp

31

WILL GET PHOTO PRINTED BROCHURES

APPLIED CHRISTIANLEADERSHIP



The Journal is a semi-annual,

refereed periodical of the Christian

Leadership Center of Andrews University

designed to encourage an ongoing conversation between academicians

and practitioners in the field of applied leadership theory.

Because vital scholarly discussion is a necessary component in

the transformation of a leader, the Journal maintains a research-

based approach to a dynamic understanding of leadership. This

dynamic transformation of a leader provides the basis for the

transformation of the organization.




designed to encourage an ongoing conversation between academicians

and practitioners in the field of applied leadership theory.









designed to encourage an ongoing conversation between academi-

cians and practitioners in the field of applied leadership theory.






SUBMISSION AREAS• Leadership feature articles• Research-based articles• Devotional articles• Book reviews



SUBMISSION FORMAT• Must be completed in APA style• Microsoft Word format, emailed to [email protected]• See our website for submission guidelines: www.andrews.edu/services/jacl



SUBSCRIPTIONS • To subscribe, see our website: www.andrews.edu/services/jacl/subscribe_now• Subscriptions are: $35 for one year (two issues) and $65 for two years (four issues)



For answers to questions regarding subscriptions or submission of papers, please contact [email protected]



I am a leader by default, only because nature does not allow a vacuum.” Desmond Tutu



APPLIEDCHRISTIANLEADERSHIP

SUBSCRIPTION RATES (Please check one)

Individual $35Student/Retired $25 Institutional $45

2-Year Rate $65

Make checks payable to: JACLEmail: [email protected]: www.andrews.edu/services/jacl

Address:JACLAndrews UniversityBerrien Springs, MI 49104-1596

APPLIEDCHRISTIANLEADERSHIP

SUBSCRIPTION RATES (Please check one)

Individual $35Student/Retired $25 Institutional $45

2-Year Rate $65

Name OrganizationName Organization

Address City StateAddress City State

Zip Code CountryZip Code Country

Phone Number Email AddressPhone Number Email Address

Number of Subscriptions Date Number of Subscriptions Date

Make checks payable to: JACLEmail: [email protected]: www.andrews.edu/services/jacl

Address:JACLAndrews UniversityBerrien Springs, MI 49104-1596

BooklEt DESIGNClIENt: thE jouRNAl oF ApplIED ChRIStIAN lEADERShIp

PART TWOPACKAGING FROM THE INTERNSHIP

34

NEEDS PHOTOS OF ACTUAL BOX AND IN-STRUCTIONS.

pACkAGE DESIGNClIENt: RouND2 INtERNShIp

I plACED thE ARtwoRk AND touChED up thE IMAGES.

35

TORPEDO BAY/NECK ASSEMBLY4

PORT and STARBOARD WING ASSEMBLY5

FINAL ASSEMBLY5

ENGINEERING SECTION ASSEMBLY2

BRIDGE ASSEMBLY3

MAIN BODY1

ASSEMBLY INSTRUCTIONS

POL897/12

1

100 2001Opaque plastic part (1-27)

Chrome plastic part (128-133)

Step number (1-5)

Clear plastic part (234)

Pictured build-up and bird decals designed by E. James Small. For excellence in model building, visit his web site at: smallartworks.ca™ & © 2012 CBS Studios Inc. STAR TREK and related marks are trademarks of CBS Studios Inc. All rights reserved. POLAR LIGHTS is a registered trademark of Round 2, LLC. ©2012 Round 2, LLC. All rights reserved. Round 2 and design are trademarks of Round 2, LLC. © 2012 Round 2, LLC, South Bend, IN 46628 USA. Product and designed in the USA. Made in China. All rights reserved.

®

GENERAL ASSEMBLY: This highly-detailed kit features precision-tooled parts for ease of assembly. Care and patience must be exercised to achieve optimal results. The kit has been designed to assemble via snap assembly.

GLUE ASSEMBLY: If a modeler chooses to glue their model, it is recommended that the instructions be examined carefully before applying cement. You will find this very helpful, as it will allow you to gain a clear understanding of how the parts fit together in order to best plan painting and final assembly. If doing a test fit,

scraping the attachment pins with a knife blade may be beneficial to separate parts before re-assembling with glue, as attachment pins have been designed for tight friction fit.

SUB-ASSEMBLIES: Note that this kit is intended to be built in sub-assemblies. This makes building the kit far more manageable. It is very important to note that it can be extremely advantageous to apply paint and decals to sub-assemblies before completing final assembly.

ROMULAN™ BATTLECRUISER1:1000 SCALE • PLASTIC ASSEMBLY SNAP -TOGETHER MODEL KIT

128

6

7

234

9

15

17

13218

14 19

20

133

25

26

129

21

130

24

22

23

41

3

2

23

131

27

130

16

8

128

5

13

10

12a12

11a

11

Place part #3 into part #2, then snap parts #1 and #2 together TRAPPING part #3. Snap part #4 onto neck assembly.

Attach to main body after bridge assembly is placed on top.

Attach completed assemblies together as shown.

Insert base assembly into bottom of completed ship.

Snap both parts #128 (2) into part #6, then snap parts #5 and #6 together TRAPPING both parts #128 (2). Place part #234 into part #9. Snap part #8 and part #9 together TRAPPING part #234. Press assembly #8, 9, 234 into part #6. Press part #7 into place on part #6. This completes the bridge assembly.

Bridge assembly snaps onto torpedo bay/neck assembly.

Assemble parts #14, #15, and #16 together as shown, then press assembly into place on main body. Assemble parts #132, #17 and #18, then assemble parts #133, #19 and #20 together. Press the left and right assemblies onto the #14, 15, 16 assembly on main body.

PORT WING / NACELLEPress part #130 into part #25. Slide part #131 into part #26, then snap parts #25 to #26 TRAPPING part #130. Snap part #23 under assembly, then snap part #27 onto end of assembly. After completing both port and starboard wing assemblies, attach to main body.

STARBOARD WING / NACELLEPress part #130 into part #22. Slide part #129 into part #21, then snap parts #21 to #22 TRAPPING part #130. Snap part #23 under assembly, then snap part #24 onto end of assembly. After completing both port and starboard wing assemblies, attach to main body.

Snap part #10 and part #13 together. DECIDE NOW ON MAKING A KLINGON OR ROMULAN SHIP.

For Klingon D7 Battlecruiser, snap Parts #11 and #12 into place on assembly #10, 13 (main body).

For Romulan Vessel, snap Parts #11a (or #11 if creating Klingon Version) and #12a into place on assembly #10, 13 (main body).

DECAL PLACEMENT + PAINTING SUGGESTIONS

KLINGON OPTIONAL DECAL PLACEMENT + PAINTING SUGGESTIONS

It is not necessary to paint this model kit to complete it. If the desired effect is to add a more realistic and detailed look, here are some suggestions for adding a few touches of paint. Spray chrome parts with a clear flat coat to give them a satin finish if desired.

Decals are supplied in this kit to provide options for the builder. Apply all or only some of them as desired.

A1

C1

C1

C1

50% Anthracite Gray MetTestor's #271150% German Silver MetTestor's #1768

A1

Anthracite Gray MetTestor's #2711B1

German Silver MetTestor's #1768C1

Light Ghost GrayTestor's #1728

50% Light Ghost GrayTestor's #172850% Flat WhiteTestor's #1768

80% Light Ghost GrayTestor's #172820% Napoleanic VioletTestor's #2013

Flat WhiteTestor's #1768

A

A

A B

BB

B

C

C

C

DAll raised structures

Beacon

A B C D

A1

B1

B1

18A optional

Part shown removed for clarity

11

1

2

3

4

5

1415

9

8107

6

13 - 11 on other side


16 - 17 on other side19 on each side

19 on each side of each nacelle

23 - 23 on opposite pylon1919 on each side


18

21

18A optional21 21

11 19 13

12

21 20

1821

22

21

21

• Markings 11 - 13 and 16 - 23 common to any Klingon D7.

13

12

INStRuCtIoN lAyoutClIENt: RouND2 INtERNShIp

I DESIGNED thE lAyout FRoM thESE INStRuCtIoNS AS wEll AS SEvERAl oF thE IMAGES.

36

NEEDS PHOTOS OF ACTUAL BOX AND IN-STRUCTIONS.

37

Reliant

Refit

Ktinga

BRIDGE ASSEMBLY3

MAIN BODY1

ASSEMBLY INSTRUCTIONS

1



Step number (1-5)


Pictured build-up and bird decals designed by E. James Small. For excellence in model building, visit his web site at: smallartworks.ca™ & © 2012 CBS Studios Inc. STAR TREK and related marks are trademarks of CBS Studios Inc. All rights reserved. AMT is a registered trademark of Round 2, LLC. ©2012 Round 2, LLC. All rights reserved. Round 2 and design are trademarks of Round 2, LLC. © 2012 Round 2, LLC, South Bend, IN 46628 USA. Product and designed in the USA. Made in China. All rights reserved.

®

highly detailed plastic assembly model kit


GLUE ASSEMBLY: If a modeler chooses to glue their model, it is recommended that the instructions be examined carefully before applying cement. You will find this very helpful, as it will allow you to gain a clear understanding of how the parts fit together in order to best plan painting and final assembly. If doing a test fit,

scraping the attachment pins with a knife blade may be beneficial to separate parts before re-assembling with glue, as attachment pins have been designed for tight friction fit.


KLINGON OPTION DECAL PLACEMENT + PAINT SUGGESTIONS

ENGINEERING SECTION ASSEMBLY2

5

987

10

1

2

11

4 3

11

3

45

7

1

6

2

98

2

4

3

6

8

7

51

9

11

10

U.S

.S. EN

TERPRIS

E N

CC-1

70

1-B

KTINGA

RELAINT

A1A5

A14

A16A19

A18

A15

A12

A22

A13A24 A25A41 A42

A28

A32

A34

A45

A33

A29

A31 A30A38

A23

A27

A26

A17A37

A35 A40

A36A43

A44

A39

A45

A10 A11

A20

A21

A3

A2

A8 A9

A4

A6A7

HINT: To seal decals, and for a more finished look, apply a clear dullcoat spray after paint and decals are completely dry.

HINT: Larger decals such as A1, A2, A40 & A41 can be cut apart with a sharp hobby knife to ease application.

AJ

A

I

C

F

A

If you desire to paint your model, Enterprise Refit is a base color of Pearl White H

REFIT

Special thanks to E. James Small for developing the aztec decals included in this kit. For excellence in model building, visit his web site at smallartworks.caAMT and design are registered trademarks of Learning Curve Brands, Inc. used under license to Round 2, LLC. © 2010 Learning Curve Brands, Inc. All rights reserved. TM, ® & © 2010 CBS Studios Inc. STAR TREK and related marks are trademarks of CBS Studios Inc. All rights reserved. © 2010 Paramount Pictures Corp. All rights reserved. © 2010 Round 2, LLC South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved.

Pictured build-up and decals designed by E. James Small. For excellence in model building, visit his web site at: smallartworks.ca

™ & © 2012 CBS Studios Inc. STAR TREK and related marks are trademarks of CBS Studios Inc. All rights reserved. POLAR LIGHTS is a registered trademark of Round 2, LLC. ©2012 Round 2, LLC. All rights reserved. Round 2 and design are trademarks of Round 2, LLC. © 2012 Round 2, LLC, South Bend, IN 46628 USA. Product and designed in the USA. Made in China. All rights reserved.

2

ROMULAN™ BATTLECRUISER1:1000 SCALE • PLASTIC ASSEMBLY SNAP -TOGETHER MODEL KIT

KEY TO NUMBERING KEY TO PAINT COLOR

000

000

000

First Layer Decal Application

Second Layer Decal Application

Opposite Side Decal Application

Paint Color (optional)A

Light Gray

Medium Gray

Black

White

Red

D

E

C

B

A Copper

Yellow

Pearl White

Light Blue

Medium Blue

I

J

H

G

F

®

ASSEMBLY INSTRUCTIONSU.S.S. ENTERPRISE STARSHIP SET

TM

AMT660

round2models.com

KEY TO NUMBERING

000

000

000

First Layer Decal Application

Second Layer Decal Application

Opposite Side Decal Application

Paint Color (optional)A

KEY TO PAINT COLOR

Light Gray

Medium Gray

Black

White

Red

D

E

C

B

A Copper

Yellow

Pearl White

Light Blue

Medium Blue

I

J

H

G

F


GLUE ASSEMBLY: If a modeler chooses to glue their model, it is recommended that the instructions be examined carefully before applying cement. You will find this very helpful, as it will allow you to gain a clear understanding of how the parts fit together in order to best plan painting and final assembly. If doing a test fit, scraping the attachment pins with a knife blade may be beneficial to separate parts before re-assembling with glue.


DECALS & PAINT: This kit includes extensive water slide decals. Note that the large areas of aztec paneling decals are applied first, allowed to dry, and a second set of smaller decals (primarily marking decals) are placed on top. These decals are compatible with setting solution which can be applied to conform around surface details. Paint is not required to produce satisfactory results. However, some modelers prefer to add additional painted detail to their kits. See the diagrams on this sheet for instructions regarding decal placement and optional paint specs. For best results apply dull coat for final finish.For more model building tips and techniques, visit the Workbench section of our website at round2models.com/workbench

1



Step number (1-5)


AMT762

STAR TREK: THE MOTION PICTURE SET1:1000 SCALE • PLASTIC ASSEMBLY SNAP -TOGETHER MODEL KIT

®

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

INStRuCtIoN lAyoutClIENt: RouND2 INtERNShIp

I DESIGNED thE lAyout FoR thESE INStRuCtIoNS AND DREw All thE IMAGES FoR thE INSIDE pAGES.

39lANDING pAGE DESIGNClIENt: RouND2 INtERNShIp

I DESIGNED thE lANDING pAGES uSING IMAGES pRovIDED.

PART THREEPHOTOSHOP WORK

42

“VOSTOK” BEFORE AND AFTER(THESE ARE NOT FINISHED)

43

“TITAN” BEFORE AND AFTER(THESE ARE NOT FINISHED)

44 pRoDuCt DESIGNClIENt: RouND2 INtERNShIp

I CREAtED thIS IMAGE IN photoShop FoR A CAptAIN ACtIoN pACkAGE.

45pRoDuCt DESIGNClIENt: RouND2 INtERNShIp

I DESIGNED thIS toy FR A pRESENtAItIoN to thE DIStRIButERS.

E M M A L E E S H A L L E N B E R G E R9094 N M a i N S t a p t 46 • B e r r i e N S p r i N g S M i 49103 • 423 .290 .4696 • e M M a l e e @ a N d r e w S . e d u

september 27th portfolio

Documents

e e s h

b e r r i e n s p r

e d uc o n t e n t sidentity

i n s t

n d r e w s

photo printed letterhead

dynamic transformation

business cards9will