PreOwnedMachinery ListSEPTEMBER2016Presentedby:

CorrugatedBoxEquipmentLLC.

1

FALL 16

www.corrugatedboxequipment.com

BOX

2

CURIONI 2000 NT

Model 2000 NTYear: 2001Size: 860 x 2000Prefeeder FOSSALUZZALead Edger Feeder3 ColorsRotary Die Cut SectionFolder + Gluer + Vacuum TrasportBundle Tyer LegamaticStacking and Palletizing Lina PARASpeed: Up to 15000 sphLine Operate Only Two WorkersLocation: EuropeUnder Power

$400,000 EUROS

AIR COMPRESSORS 4

BALERS 4

BAND SAW 5

BOXMAKER 5

SHREDDER 5

BUNDLE TYER 5

CONVEYORS 6

CORRUGATORS 7

BOILER 8

CUT OFF 8

DRY END 8

DOUBLE BACKER 8

ROLL STANDS 8

SINGLE FACERS 8

SLITTER SCORERS 9

SPLICER 9

DIE CUTTER AUTOPLATEN 9

DIE CUTTER ROTARY 10

DIE CUTTER ROLLER 11

DIE CUTTER PLATEN 12

ECCENTRIC SLOTTER 12

FORKLIFTS 12

FOLDER GLUER 14

FOLDER GLUER SPECIALTY 15

FLEXO PRINTER SLOTTER 15

FLEXO PRINTER LETTERPRESS 16

FLEXO FOLDER GLUER 16

GLUER 19

TESTING EQUIPMENT 19

LAMINATORS 20

LOAD FORMERS 20

MISCELLANEOUS 20

OFFSET PRINTERS 21

PARTITION ASSEMBLERS 21

PARTITION SLOTTERS 21

PREFEEDER 21

ROTARY SLOTTER 21

SAMPLE TABLE 22

SHREDDERS 22

STACKERS 22

SLITTER SCORER 23

STITCHERS 23

STRECTH WRAPPERS 23

WAXERS 23

3

AIR COMPRESSORS

75 HP INGERSOLL ROTARY SCREW AIRCOMPRESSOR, Model SS-XP75,575/3Phase/60 Hz. Under PowerAC-001 $8,500 USD

40 HP Quincy Rotary Screw AirCompressor, Model QST, 150 CFM, 125 PSI,8,031 Hours, 230/460 Volt, 3 Phase, 60 Hz,200 Gallon Tank, S/N 39423.AC-002 $4,800 USD

50 HP ATLAS COPCO AIR COMPRESSOR,Model GX37, 460/3Phase 60 Hz. UnderPowerAC-003 $8,500 USD

50 HP ATLAS COPCO AIR COMPRESSOR,Model GA37, Under Power.AC-004 $6,000 USD

50 HP ATLAS COPCO AIR COMPRESSOR,Model GA 507, 460/3Phase 60 Hz. UnderPowerAC-005 $5,000 USD

30 HP INGERSOLL ROTARY SCREW AIRCOMPRESSOR, Model UP6-30-125,200/3Phase 60 Hz. Under PowerAC-007 $12,800 USD

25 HP Sullair Rotary Screw Air Compressor,Model 10-25, 100 CFM.AC-008 $5,000 USD

25 HP Sullair Air Compressor, Model 10B-25, 125 CFM, Sullair Dryer #SRD300 Included.AC-009 $7,000 USD

BALERS

BALEMASTER Auto Tie Baler, Model 1850,Year: 1995, 150 HP, 12” Cylinder, 75” x 44”Feed Opening. Infeed Conveyor. GoodCondition.B-001 Make an Offer

72” LAKE AMERICAN ECONOMYHORIZONTAL BALER, Model 72-36-30,Closed Door Baler, Manual Tie, S/N W0729,20 HP, Bale Size 30” 36” x 72”, ALLEGHENYShredder, 30” Wide x 10’ Long HorizontalFeed Conveyor, Exit Conveyor fromShredder to Baler.B-002 $31,900 USD

72” Compac Horizontal Baler, Auto Tie ,Not Under Power, **VIDEO AVAILABLE**B-003-C $15,000 USD

Selco Harris Vertical Baler, Model V5-HD,S/N 08882897, Very Good Condition.B-004-A $4,250 USD

72” Marathon Down Stroke Vertical Baler,10HP , 7” RAM, 240 Volts, 3 Phase.B-005-A $4,500 USD

72" Balemaster Horizontal Baler, ManualTie, Heavy Duty 9" RAM Cylinder, 36"BloApco Shredder, Incline Conveyor,Under Power.B-006 $28,000 USD

Marathon Vertica Baler, Model V-6030-HD,S/N 2302135, 10HP, 460V, 3PH Bale Weight1,000 Libras, Excellent Conditions.B-007-A $6,000 USD

Horizontal Baler, BloApco Shredder,Conveyor , Allegheny Shredder, Not UnderPower.B-008 $26,500 USD

60” Load King Vertical Baler, 480 Volt, 3Phase, Very Good Condition.B-010-A $5,000 USD

NEW LISTEDVertical Baler, 480 Volt, 3 Phase, VeryGood Condition, Under Power. **VIDEOAVAILABLE**B-011-D $5,000 USD

4

BAND SAW

60” JIG SAW Labor Sabor DJ 60. (2) TwoAvailableBS-001 $7,000 USD

36” X 20” TANNEWITZ Band Saw, Model G-1E, Gear Adjusted Ground Guide Post,Worm & Gear Tilting Table, AutomaticBrake, Foot Pedal Control.BS-002-K $13,000 USD

BOXMAKER

55” Rite Size Boxmaker, Model BM-55, Fullwidth flexo printer, Under PowerBM-001 $15,000 USD

55” Rite Size Boxmaker, Model 55-375-640,Under PowerBM-002 $12,000 USD

55” Rite Size Boxmaker, Model BMC-55-375, Loading Table, Computerized, 1987,460/ 3Phase/60. Under PowerBM-003 $35,000 USD

Gopher SRE Maxi Boxmaker with FlexoPrint Unit FPU and Roller Conveyor, ExellentCondition. Under Power.BM-004 Ask for Price

55" Rite Size Boxmaker, Model BMC-55,Stamp Printer, Under PowerBM-005 Make an Offer

55" Rite Size Boxmaker, Model BMC55-1000, Certificate Stamp Print, 230 Volts, 30Amps, 3 Phase, 60 Hz, S/N # 729, 1983, NotUnder Power.BM-006 Make an Offer

55” Rite Size Boxmkaer, Model Compu-Size, Computarized touchscreen controls,Flexo Spot Printer, Not Under Power.BM-007 Make an Offer

55" Rite Size Boxmaker, Model BMC-55-375,Loading Table, Computerized, PrintsBMC's, Not Under Power.BM-008 Make an Offer

82" AUTOBOX Automatic Boxmaker, Model1070 Series 7, PLC Controlled, Not UnderPower.BM-009 Make an Offer

84” Compu Size Boxmaker, Under Power.BM-010 $195,000 USD

126” Ez-Box Machine Boxmaker, Model970C-126, 1 Color, Flexo Anilox Printer 970-126, Conveyor & Hooper, Under Power.BM-011 $215,000 USD

SHREDDER

Hammermill Shredder, 25HP, 48” InFeed,36” Out, Whole System Included.SH-001-I $17,500 USD

BUNDLE TYER

Transpak Corrugated Strapper, Model: TP-701-CC-L3, Siemens PLC control systemCE Certified, Arch size: 1650 mm (65") widex 500 mm (19 5/8) high Voltage: ______volts, 3 phase, 60 Hz, Strap size: 6mm,Speed: 26 bundles per minute single strap-15 for double strap. Light tree alarm withlow strap sensor, Footprint: 726mm (29") x2182mm (86”)BT-001 $32,000 USD

5

STRAPACK Bundle Tyer, Model RQ-8AP/3. Under Power.BT-002 Make an Offer

Signode Spirit Bundle Tyer, .75 HP, ThreePhase. Not Under Power. (1) Available.BT-003 Make an Offer

EAM MOSCA 60" throat Bundle Tyer, 1999,model RO-TRC.BT-004 Make an Offer

EAM MOSCA ROMP -2 Bundle Tyer, ArchSize 1250 mm x 1000 mm (51" x 39"), 12 mmStrapping, Roller Table.BT-005 $7,000 USD

EAM MOSCA TR3-C, Arch Size 900 mm x 550mm (36" x 21.5"), 8-9 mm Strapping,Manual Available, Excellent Conditions.BT-006 $14,500 USD

MOSCA TYER, Under Power.BT-007 $10,000 USD

MOSCA TYER, Model RO-TRS-4/1,Not UnderPower.BT-008 $11,000 USD

EAM MOSCA TYER, Model ROMP-2, ArchSize 39.5” x 31.5”, 8-9 mm Strapping, UnderPower, (3) Available.BT-009 $7,000 USD

WILTON Bundle Tyers, Model SS5MX, PedalOperation, Volt: 110, Not Under Power. (2)AvailableBT-010-C $4,500 USD EACH

24” x 60” Signode Bundle Tyer, Model SureTyer, 230 Volts, 3 Phase, S/N B 4251,Year:2001, Under Power. **VIDEOAVAILABLE**BT-011-C $3,000 USD

EAM MOSCA TYER, Model Fusion, Size 800 x600, New Condition.BT-012-A $9,000 USD

CONVEYORS

(1) One Lot Conveyor, consist:70” Roller, 94” Roller, 58” Roller, Not UnderPower.C-001-C $11,000 USD

72” x 20’ Gravity Roller Conveyor, NotUnder Power.C-002-C $10,000 USD

60” x 35’ Gravity Roller Conveyor, NotUnder Power.C-004-C $13,500 USD

60” x 45’ Conveyor, Not Under Power.C-005-C $20,000 USD

6

CORRUGATED COMPONENTS

CORRUGATOR

65" Yantai Star Fingerless Corrugator. B +C flute Single Wall, Including 3 autosplicers, NC Cut-off, NC Slitter scorer andsingle automatic downstacker. Maxmechanical speed 200 m/min. RHDPG.Year 2005. Immediately Available. Verygood condition. Spare,new E,F,B & C fluterolls + spare glue rolls and doctor rolls atextra price.CC-CC 001-H Ask for Price

SPECIAL LISTING110” Agnati Corrugator, RHDPG, PBM MillRoll Stand (x5), GVR SC High Speed Splicer(x5), Master Multiple Flute Single Facer(x2), PRQR Quadruple Preheater (x1), PDTConveyor Bridge (x1), SP Inclined BeltConveyor (x2), Coralligner BVW 0320 /Tensionmaster PFW 03232 (x1), Vary BondGlue Unit (x1), GPA 3+2 Double Facer (x1),HRS90 High Speed Rotary Shear (x1),Powerset Slitter Scorer (x1), TI 2 Lead inTables (x1), TREL 90 D HP HighPerformance (x1), RDA Downstacker (x1),QC2 Quality Control (x1), ProductivityControl (x1), Interface Host Computer (x1),Interface Modem PC Level (x1), Display 4Levels (x1).CC-CC 001-J Ask for Price

98” SIMON BHS FOSBER CORRUGATOR,LHDPC, Speed 200 m/minute, Single FacerFlute A, Flute B and flute E, Torres Splicers,Fosber Dry End, Stacker, Accessories,Complete Line. Excellent Conditions.CC-CC 002-G Ask for Price

87" Corrugator, S&S HKE SinglefacerFingerless Flute C, S&S HKE SinglefacerFingerless Flute B, Langston HD SinglefacerFingerless Flute E, Koopers Double GlueUnit, GEO Martin Rollstands, Torres Splicers,S&S HCL Preheaters, LangstonPreconditioner, Langston Double Backer,S&S Rotary Shear, S&S Triplex, S&S Cut Off,Marquip Downstacker. Under Power.CC-CC 003-D Ask for Price

87" Corrugator S&S / Langston / Marquip; 5 Martin Rollstands2 Marquip Splicers2 Butler Splicers1 Serco Splicers2 S&S Preheaters, Model HCL (1964)1 Triple Preheater S&S1 Langston Preconditioner1 S&S Preconditioner1 Single Facer Langston, Flute C, CRC Fingerless Conversion (2004)1 Single Facer Langston Flute B1 Crittenden Bridge2 Preheaters S&S, Modelo HCL 87" (1964)1 Glue Station S&S (1965)1 Double Facer S&S Model HE1 Rotary Shear Marquip Model Black Belt1 Slitter Scorer Marquip 1 Marquip Double Cut Off Model 31 Double DownStacker Marquip CC-CC 004-C $210,000 USD

78” JATSU Corrugator2) Two 78” Langston Single Facer Model101 Flute B and Flute C(1) One 55” Cavalle Single Facer FluteDouble Glue Station Dpack ( NEW)JATSU Cut OffJatsu Slitter Scorer(4) Preheaters (90cm) and (3) Preheaters(60cm)LHPGLeon Boiler, 50 HP, LPGlue KitchenUnder PowerCC-CC 005-D Ask for Price 7

BOILER

Cleaver Brooks Boiler, Model 700, 60HP, 250 PSI, 2003. Reconditioned.BO-CC 001 Ask for Price

Parker Boiler Co. Boiler, Model DAS3072, 150 HP, 6,300 Libras/Hr/Steam, Under Power.B0-CC-02 Ask for Price

CUT OFF

98” Marquip Cut Off, Model I, Not UnderPower.CUT-CC-001-C Make an Offer

98” Marquip Cut Off, Not Under PowerCUT-CC-002-C Make an Offer

98” Marquip Double Cut Off, Year: 1990,LHDPG, Model III, Air Cooled, UpgradedTail Tracker, Upgraded Knife Out Feed.**VIDEO AVAILABLE**CUT-CC-003-I Ask for Price

78” Agnati Model TREl Cut Off, Single,Year: 2012. Under Power. ** AvailableJanuary 2017**CUT-CC-004-H $55,00.00 USD

DRY END

110” Dry End. RHDPC, Speed 130 mpm, BFlute, BC Flute, C Flute, E Flute, E Flute, BHSRotary Shear KQ-M, Marquip Slitter ScorerR&S, Cut Off Knife QS (Triple), BHS StackerMarquip Tear Tape, Pre Print Control,Marquip Dry End.DE-CC 001 Make an Offer

98” MHI Dry End. RHDPG, Rotary Shear MHIYear: 1983, Slitter Scorer MHI Model 57-GYear: 1993, Cut Off Knive Model 58C Year:1983, Stacker Model 59 Year:1983, MHIsigma 2000 Corrugator Control Included.Available December 2016.DE-CC 002 Make an Offer

DOUBLE BACKER

98" Koopers Double Backer, LHDPC, (16)Hot Plates, Upgraded Electrical Panel, BeltTension system Upgrade, Under Power. **Video Available**DB-CC 001 Make an Offer

ROLLS STANDS

87” Martin Roll Stands, Model LH-87, UnderPower, (10) Available.ROL-CC 001 $35,000 USD

90” Martin Rollstands, 84” Diameter, 4” &12” Chucks, Witchita Brakes, Under Power.ROL-CC 002 $10,000 USD

98" Marquip Duplex Shaftless Rolllstandswith air expanding chucks and air brakes.(3) Available. Year 1993. Not UnderPower. Marquip splicers also availableseparately if required.ROL-CC-003 $60,000 USD

SINGLE FACER

85” TCY Single Facer, Flute B & C,Cartridge, Fingerless, RHDPC, **AvailableJune 2016**SF-CC 001 Make an Offer

78” Langston Single Facer, Model XD, Flute B, RHDPC.SF-CC 002 $14,000 USD

103” Langston Single Facer, Flute E, Model XD, Fingerless, LHDPC.SF-CC 003 $22,000 USD 8

SLITTER SCORER

70" ISOWA HSS 4 Slitter Scorer, Year: 1999,LHDPG, Max. Speed 250m/min. AvailableMay 2016SS-CC 001 Ask for Price

98" MEDESA Slitter Scorer CLM-350-CL, Year:2000, RHDPC, Speed 350 m/min, Max BoardThickness: 15mm, Max Board Weight: 2000g/m2, Minimum Distance Between Scores:150 mm, Minimum Distance BetweenKnives: 150 mm, 39 Kw. Available March2016.SS-CC 002 $120,000 USD

SPLICERS

87” Marquip Splicers, (2) Two Available,Model 1M, Under Power.SP-CC 001 $15,000 USD

87” Marquip Splicers, (2) Two Available,Under Power.SP-CC 002 Make an Offer

98” TORRES Splicers, (2) Two Available,Year: 1997 and 2002, Not Under Power.SP-CC 003 Make an Offer

STACKER

NEW LISTED87” Marquip Double Down Stacker, ModelII, S/N 39523-000, Year: 1997, LHDPC, SpareParts, Not Under Power.ST-CC-001 Make an Offer

DIE CUTTER AUTO PLATEN

BOBST 1260 Autoplaten Die Cutter, 1968,Under Power.ADC-001 $60,000 USD

BOBST 160, Max. Size 1600 x 110 mm, Min.Size 600 x 520 mm, Speed 6750 sph,Automatic Feeder with vacuum system, 4bottom flexo printing units with vaccumtransport sections, Under Power.ADC-002 Ask for Price

UEDA Autoplaten Die Cutter, Model U-1400,1990, Max Sheet 950 x 1350 mm, Min Sheet300 x 530 mm, Max Speed 45 sheets/min,Table Lifter, No Stripper, Not Under Power.ADC-003 Make an Offer

BOBST SPO 1600 Autoplaten Die Cutter,1981, Max. Sheet 1600 mm x 1100 mm, Max.Speed 6000 Sheets/Hour, Suction PlateFeeder, Upgraded to Claw Safety System,Inverter Drive fitted 2007.ADC-004 $200,000 USD

47” x 62” Marumatsu Autoplaten DieCutter, 1998, S/N ME-7192, Model SMII-1612V, Super Max II. Under Power.ADC-005 Make an Offer

47” x 62” Marumatsu Autoplaten DieCutter, Model 1612, Super Max II, DualStripping, Refurbished in 2013, Year:1990,Under Power.ADC-006 Make an Offer

47” x 71” ETERNA N1600XR, Year: 2005,Speed 5500 s/hr , Width 650-1620 mm,Length 420-120 mm, Supported board: F, E,B, C, A, AB Flute.ADC-007 Ask for Price

BRAUSSE 1050 SE, Year: 2006, Speed 7500 s/hr, Width: 400-1050 mm, Length: 370-750 mm, Size 1050 x 750 mm, Supported Board: Cardboard.ADC-008 Ask for Price

BOBST SPO 160 S Autoplaten Die Cutter,1996, Max. Size 1600 x 1100 mm, Speed5500 sph, Excellent Condition, Under Power.ADC-009 Ask for Pric 9

ASAHI Autoplaten Die Cutter, Model AP-1020-N, Year: 2005, Quick Set Up forfrequent order change, Compact Space,Max. Sheet Size 740 mm x 1020 mm, Min.Sheet Size 340 x 440 mm, Speed 6000 sph,Max. Operational Pressure 250 Tons,Excellent Condition. Not Under Power.Video Available.ADC-010 Ask for Price

BOBST 102E Autoplaten Die Cutter, Year: 1981, Under Power. Video Available.ADC-011 Make an Offer

BOBST SP 102 E Autoplaten Die Cutter, Year:1981, Continuous Delivery Rack, Pre- Load,Continuous Feed, (1) Chase, (1) Plate, (1)Side Guide, (1) Set of Upper & LowerStripping Frames.ADC-012 $100,000 USD

BOBST SP 102 CE Autoplaten Die Cutter,Year: 1983, (2) Chases, (1) 4 mm Plate 91) 5mm Plate, (4) Universal BOBST StripperFrames for Top and Bottom, (1) Quick LockUpper Stripper Frame, (1) Meurer UpperFrame, Inline Stripping & Lead EdgeRemoval, Front Trim Removal Device, UnderPowerADC-013 $95,000 USD

47” x 63” Cobra Autoplaten Die Cutter,Model A120-1625, Unisoft Suction Feeder,Dual Action Stripping, CenterlineCompatible, Automatic Bundle DeliverySystem, S/N 2334, Year: 2004, Under Power,Available June 2016.ADC-014 $110,000 USD

40” x 55” Marumatsu Autoplaten DieCutter, Model 1410, Auto Feed, S/N 65460,Under Power.ADC-015-C $40,000 USD

40” x 55” Marumatsu Autoplaten DieCutter, Model 1410, Year: 1990, Max. Sheet:1400 mm x 1020 mm, Min Sheet 550 mm x300 mm, Knife Height: 23.6 mm, Max Speed50 spm, Flute: E,B,A,AB. Under Power.**VIDEO AVAILABLE**ADC-016-B Ask for Price

NEW LISTEDBOBST SPO 2000, Autoplaten Die Cutter,Year:2008, Max. Size 2030 mm x 1270mm,Min Size 600 mm x 520 mm, CorrugatedBoar Up to 9 mm, Speed 5000 sph, UnderPower.ADC-017-G Ask for Price

NEW LISTEDBOBST SP 102-E Auto Platen Die Cutter,Year: 1983, Max. Size 102 x 72, Min Size 40 x55, Speed: Up to 7500 sph, Under PowerADC-018-D $110,000 USD

DIE CUTTER ROTARY

53” x 80” Curioni RDC Plain. 440 Volts. UnderPower. Video Available.RDC-001 $35,000 USD

66" x 50" Norwood 1C RDC, Under Power.RDC-002 Make an Offer

66" x 80" Ward RDC, 1C, Prime Lead EdgeFeeder, No Stacker, Under Power.RDC-003 $95,000 USD

66” X 80” MHI RDC, 3C, Model Esprit, LeadEdge Feeder, Ceramic Anilox Rolls, MHIBeater Stripper Stacker.RDC-004 Make an Offer

66" x 80" Ward Genco RDC, 3C, 1974,Prefeeder, Feeder, Feeder Vaccum Plate,Stripping Unit Vibration, Stacker.RDC-004 $95,000 USD

10

66” x 100” Schule –Cortec 4 Color RDC,1990, Lead Edge Feed, Flexo print downs:Bottom print, double rolls, floortracks,Chambered scrapper blades,ceramic rolls laser engraved ( 1 sparereconditioned in box), Chromed shafts,chrome cylinders, Rotoback soft platesystem, Mathews mains and intermediates,single pump system, Central greasingsystem on each unitElectric Running Registers, Auto set-autocaliper- dedicated work station for settings(1 new spare), Electric Frame Opening, BayMachinery Die Cut Stacker (2012).Available Upon ReplacementRDC-005 Make an Offer

66” X 100” Ward Turner 2C Rotary DieCutter, Lead Edge Feeder, Roll to RollSystem, Anilox Ceramic Rolls, Stacker. InOperationRDC-006 $140,000 USD

Martin DRO 1628 5C Rotary Die Cutter, 4Printing Stations 1992 and 1 1994, CeramicAnilox Rolls 80 lines/cm, Volume 14.3cm3/m2, System Posilock, Palletizer MartinMultipal Semi Automatic, Prefeeder MartinPackfeed. Many Spare PartsRDC-008 Ask for Price

SPECIAL LISTING50” x 110” Isowa Cosmos PS6F, 1996, 4Colors, Slotter Section, Rotary Die CutSection, Scrap Cleaning Section, Stacker,FEM 90, Under Power, Spare Parts ($60,000usd Value)RDC-009 Ask for Price

66" X 113" WARD RDC, 1C, 1500 Series, Sun Lead Edge Feeder, Metal Print Cylinder, Roll to Blade, Scoring Shaft.RDC-010 Make an Offer

66" x 113" Koopers / United 4C Rotary Die Cutter, Year: 1987, 115" ASC ThermoguardPrefeeder, Year:1985, Lead Edge Feeder, Slotting/Scoring Section, 115" Geo Marti Rotary Die Cut Stacker, Year 1987, Under Power. ** Available February 2016**RDC-011 Make an Offer

66" x 113" Ward, Rotary Die Cutter, No Color, Vacuum Assist Kicker Feed, Owens Stacker, Batch Counter, Electric Running Registers. Under Power.RDC- 012 Make an Offer

66" x 113" Ward Rotary Die Cutter, No Color,Series 15000, Vacuum Assist Kicker Feed,Electric Running Registers, Electric FrameOpening, Scoring Shafts. Not Under Power.RDC-013 Make an Offer

66" X 113" Ward Rotary Die Cutter, 1C, 1500Series, Sun Lead Edge Feeder, Metal PrintCylinder, Roll to Blade, Scoring Shaft, NotUnder Power.RDC-014 $85,000 USD

66" X 115" Ward 2C, Rotary Die Cutter,15000 Series, Year: 1974, Sun Lead EdgeFeeder, Electric Running Registers, ElectricFrame Opening, Metal Print Cylinders, Rollto Roll Metering, Dicar Equalizer, SunMicroGrind, Tungsten Carbide Roll, 113”Martin Die Cut Stacker, LCS Safety Systemwith Pozi Stack, Spare Recontioned Anilox,Wiper & Feed Roll, Not Under Power.RDC-015-C Make an Offer

66" x 115" Prime 2C , Rotary Die Cutter, S/N 1084, Sun Lead Edge Feed, Electric Running Registers and Frame Opening, Metal Print Cylinders, Sun Raimbow Graphics Blade System, 115" Bay Die Cut Stacker, Under Power. **Available April 2016**RDC-016 Make an Offer

66" x 115" Staley 1C Rotary Die Cutter, S/NJ6165, Rotofeed Lead Edge Feeder, ElectricRunning Registers, Electric Frame Opening,Right Angle Scrap Conveyor, Greene LineDie Cut Stacker, Model DCB, AG StackerControls, Under Power, Available August2016. ** VIDEO AVAILABLE**RDC-017-C Make an Offer

DIE CUTTER ROLLER

60" x 80" Kirby Roller Die Cutter, Model 60,Spare Anilox Roll, Under Power. GoodConditions. Manual Available.DR-001-C $15,000 USD

11

100” Haire Roller Die Cutter, Model DCII, PLCUpdate, New Belts, Under Power.DR-002-C $35,000 USD

DIE CUTTER PLATEN

28” x 41” Thomson Die Cutter, Max. CuttingSize: 28” x 41”, 5HP, Speed 1800 sph, UnderPower.DC-001 $10,500 USD

28" x 41" Thomson Die Cutter, 220/440, AC,60HZ, 60/80 PSI, One (1) Chase Included,Good Condition.DC-002 $12,500 USD

NEW LISTED38” x 54” Thomson Die Cutter, Speed DriveVariable, Under Power. Refurbished.DC-003-A $25,000 USD

33” x 47” Thomson Die Cutter, Air Clutch,Excellent Condition. Video Available.DC-004 $24,000 USD

33” x 47” Imperia Die Cutter, 2008, WithTimer, Pneumatical Clutch, Feeder,Accessories, Excellent Condition.DC-005 Ask for Price

33" x 47" Imperia Die Cutter, AutomaticFeeder, S/N 8909/1217, Speed 1300 s/h,Platen Size 880 x 1224 mm, PneumaticClutch, Manuals, Excellent Conditions.DC-006 Ask for Price

38” x 54” Thomson Die Cutter, Style 8-6, S/N13020. Under Power.DC-007 $20,000 USD

NEW LISTEDViking / Crosland VK, Size 1650 mm x 1330 m, fully guarded safety protection, Year: 1999.DC-002-H Make an Offer

39" x 55" Rabolini Imperia Die Cutter Platen,Max Size 1000 mm x 1400 mm, Air Clutch,Timer Very Good Conditions.DC-009 Ask for Price

39" x 47" Marvi Die Cutter, Speed 840 sph,Under Power.DC-010 $22,000 USD

46" x 56" 5/0 Miehle Die Cutter, S/N 10379, Liebenow Conversion, Under Power.DC-011 $15,000 USD

70” x 125” JUMBO Die Cutter, Max CuttingSize 3124 x 1625mm. Speed 800 sph. 500Tonnes cutting pressure. Includes electronicchase and guarding. Excellent Condition.DC-011 Ask for Price

ECCENTRIC SLOTTERS

110” Eccentric Slotter, (3) 29” Slotters, (1) 29”x 14” Slotter, Under PowerEC-001 Make an Offer

94" S&S Eccentric Slotter, (4) 28" SlottingHeads. Under PowerEC-002 Make an Offer

90" Eccentric Slotter. Under PowerEC-003 Make an Offer

FORKLIFTS

HYSTER Forklif with Clamp, S100FTBCS, Year2012, S/N G00V06488K, Hours 6740, 10,000Libras, LPG, 85”/163”, Clamp Paper Roll.FLF-001 $29,500 USD

HYSTER Forklif with Clamp, S135XL2, Year:1995, Hours 6955, 13,500 Libras, Triple MastStage, Mast Height 11’ 10”, Propane,Cushion Tires, Cascade Clamp, Paper Roll72” x 36”, 4450 Libras.FLF-002 $19,000 USD

HYSTER Forklift with Clamp, 155XL, Year:1995,Hours 7800, 7,000 Libras, Triple MastStage, LP, Cushion Tire, Cascade Clamp,Paper Roll 60", Capacity: 4450 Libras.FLF-003 $21,000 USD

12

HYSTER Forklift with Clamp, S80XLBCS,Year: 1997, Hours 8500, 7,000 Libras, TripleMast Stage, LP, Cushion Tire, CascadeClamp, Paper Roll 60", Capacity: 4450Libras.FLF-004 $17,000 USD

HYSTER Forklift with Clamp, S125A, Hours709, S/N A024DG3280E, 12,500 Libras, TripleMast Stage, Max Lift 286”, Propane,Cushion Tire, Cascade Clamp, Paper Roll72” x 32".FLF-005 $25,900 USD

HYSTER Forklif with Clamp, S100FTBCS, Year2012, S/N G00V06490K, Hours 10456,10,000 Libras, LPG, 85”/163”, Clamp PaperRoll.FLF-006 $34,500 USD

HYSTER Forklif with Clamp, H90FT, Year2010, S/N P005V02847H, Hours 2391, 9,000Libras, Diesel, 91”/195”, Pneumatic Tires,Clamp Paper Roll.FLF-007 $29,500 USD

HYSTER Forklift with Clamp, S70FT, Year:2010, Hours 7372, 7,000 Libras, DoubleMast Stage, Mast Height 84" / 122", LP,Cushion Tires, Cascade Clamp, Model25H-RCP, 4450 Libras, Year: 2009, PaperRoll 63"FLF-008 $25,000 USD

HYSTER Forklift with Clamp, S60FT, Year:2011, Hours 13440, 7,000 Libras, Triple MastStage, Mast Height 88" / 187", LP, CushionTires, Cascade Clamp, Model 25H-RCP,4450 Libras, Year: 2009, Paper Roll 63"FLF-009 $24,000 USD

HYSTER Forklif, S50FT, Year 2010, S/NF187V17243H, Hours 11,138, 5,000 Libras,LPG, 82”/189”, 48" Forks.FLF-010 $14,000 USD

TOYOTA Forklif, Model 8FGCU25, Year 2012, S/N 38813, Hours 3,487, 5,000 Libras, LPG, 87”/198”, 42" Forks.FLF-011 $13,500 USD

CATERPILLAR Forklift, Model 2C5000, Year: 2012, 5,000 Libras, LPG, Hours 2200, 2 Stage Mast, 57" Lowered/79" Raised, Nissan Engine, Cushion Tires, 42” Forks.FLF-012 $14,000 USD

CATERPILLAR Forklift, Year: 2012, 6,000Libras, LPG, Triple MAST, Max Mast: Over180", Lowered Mast 81-90" , Cushion Tires,Hours: 19,000FLF-013 $12,000 USD

REDUCED PRICECATERPILLAR Forklift, Year: 2012, Model2C6000, 6,000 Libras, LPG, Triple StageMast, Max Mast: 186", Lowered Mast 83" ,Cushion Tires, Nissan Engine, 42” Forks.FLF-014 $17,000 USD

TOYOTA Forklift, Model 7FGCU20, 5,000Libras, Cushion Tires, Hours: 18,000,Propane, Two Stage Mast, Max Mast/LiftHeight 111"-120", Lowered Mast/Lift Height:71"-80", Forks 5" Wide x 40" Long.FLF-015 $7,000 USD

NISSAN Forklift, Model MPL02A25LV,Year:2006, 4,000 Libras, LPG, MaximumMast: Over 180", Lowered Mast: 81-90",Hours: 4500, 42" Forks, AutomaticTransmissionFLF-016 $15,000 USD

HYSTER Forklift, Model H60XM, S/ND177B35791U, 6000 Libras, LPG, 181" Lift,Side Shift, 42" Forks, Auto Transmission,Power Steering, Solid Pneumatic Tires,Great Condition.FLF-017 $12,000 USD

13

HYSTER Forklift, Model H60C, S/NC5D2559F, 6,000 Libras, LPG, 146" Lift, NoSide Shift, 42" o 48" forks, StandardTransmission, 2 Speed, Pneumatic Tires,5458 Hours.FLF-018 $8,500 USD

MITSUBISHI Forklift, Model FG25, 5000Libras, Side Shift, 16' Triple Stage Mast,Automatic Transmission, LPG, NewPneumatic Tires, 42" Forks, New Paint, NewSeat, Excellent Condition. **VIDEOAVAILABLE**FLF-019 $13,000 USD

HYSTER Forklift, Model S60FT, Year: 2011,6000 Libras, 3 Stage Mast, 87” Lowered,187” Raised, LPG, Cushion Tires, 4 WayPlumbed Hydraulics, 42” Forks, 3000 Hours.FLF-020 $16,000 USD

TOYOTA Forklift, Model 7FGCU25, 5,000Libras, Triple Stage Mast 16’, Auto Trans,LPG, Very Good Tires, New Paint, NewSeat, Very Good Working Condition.FLF-021-A $11,500 USD

CATERPILLAR MITSUBISHI Forklift, ModelFGC33, 6500 Libras, Maximum Mast: 148”,Lowered Mast: 90”, Year: 2007, Hours:1290, 48” Forks, No Side Shift.FLF-022-A $10,000 USD

YALE Forklift, Model GLC070, 7,000 Libras,LPG, 185’” Lift, Side Shift, 42”Forks, AutoTransmission, Cushion Tires, 6,000 Hours.FLF-023-A $13,500 USD

NISSAN Forklift, Model MPL01A20LV,Year:2008, LPG, Max Mast: Over 180”,Lowered Mast: 81”-90”, Pneumatic Tires,Auto Transmission, New Brakes, New Tires.FLF-024-A $13,500 USD

FOLDER GLUER

42” x 110” Curioni Folder Gluer, AutomaticHopper Stream Feeder, Cold PVA modelERO Electronic Gluer (Both Sides), Foldingwith bars and belts, Counter Ejector,Completely Rebuilt 2011.FG-001 $95,000 USD

49" x 118" Emba Folder Gluer, Model UVZ-RTZ, Belt Feed, Copar Glue System, BatchCounter, Small Spanker, Under Power.Manuals Available.FG-002 Make an Offer

42” x 110” Curioni Folder Gluer, AutomaticHooper Stream Feeder, Cold PVA GlueApplicator, Folder Section, Squarer,Counter Ejector, Under Power. **VIDEOAVAILABLE**FG-003 Make an Offer

NEW EQUIPMENTJWG Automatic Specialty Folder Gluer,Throat size 70.75", Compression section,Minimum panel: 4.375", Maximum panel:39.25” Substrate thickness: E flute – DW,folding carton stock 300g+, Averageoperator speed 1,000-1,200 sphdepending on the size of the box, Weight:7,500lbs, Floor Space: 15' long x 8' wide,Box styles - Straightline and autobottom,Adhesive agent - Cold glue.FG-006-F REQUEST A QUOTE

14

FOLDER GLUER SPECIALTY

52” International Folder Gluer, ModelSpeed King, B&C Double Wall, MactronShure Cold Glue System, Nordon Hot GlueSystem, 4 Corner, Max Blank 54” x 61 1/2”,Min Blank 12” x 8”, Speed 5000 sheets perhour (average)SFG-001-C Make an Offer

60" Jagenberg Specialty Folder Gluer,Model Diana 165-1, Lockbottom, UnderPower.SFG-002-D Ask for Price

74" Post Specialty Folder Gluer, ModelLectra Fold, Year:1996 , Valco Glue System,Spare Parts, 4 Corner, Lock Bottom, Max.Sheet 55" x 80" Under Power. ** VIDEOAVAILABLE**SFG-003-D $25,000 USD

VEGA Onda 1600, Max. Size 1610 x 1000mm, Straight Line, Auto Bottom, 4 Corners,Spray Gluer System, Accessories.SFG-004-G Ask for Price

Jagemberg Diana 90, Year: 1991, LockBottom, 4&6 Corners, Under Power.SFG-005-D $115,000 USD

BOBST Domino 90, Straight Line, AutoBottom, 1) First Score Pre-Fold, (4) Hook(Fold-Over) Folding Carton, (4) HelicalFolding Device (2 each side), (2) UniversalFolding Device (1 each side), (8) ExtensionRods, (3) Lower Support Rails, (2) UpperSupport Rails, (2) "U" Bar Guide, (8) Strap, (2)Feeder Support Guide, Pafra Glue Systemw/ (6) Glue Heads & (2) Sensors.SFG-006-E $70,000 USD

BOBST VISION FOLD 170, Year 2011, MaxSheet: 1700 x 1100 mm, Min Shet: 296 mm x60 mm, Cardboard 800 gsm, Board: N-F-E-B,Max Thickness of Folded Box: 15mm,Speed: 20-200 m/min, Straight Line andCrashlock Bottom Boxes, Remote Control,Under Power.SFG-007-G Ask for Price

FLEXO PRINTER SLOTTER

35" x 78" Hooper 3C, Flexo Printer Slotter,1967, Sun Feeder, Reverse Angle DoctorBlade with Ceramic Anilox Rolls, SlottingSection, Manual Set Up, Greene LineStacker, Manuals Available. 2012. UnderPower.FPS-001 Make an Offer

35" x 80" Hooper 2C Flexo Printer Slotter,Stacker, Under Power.FPS-002 Make an Offer

NEW LISTED37” x 80” F&E 2C Flexo Printer Slotter, S/NPA-864, General Vaccum Feed, CMIConversions, Electric Running Registers,Electric Frame Opening, Bostitch SheetStacker, Under Power.FPS-003-C $20,000 USD

38” x 80” F&E 2C, Flexo Printer Slotter,Vaccum Assist Kicker Feed, MotorizedOpening, Martin Stacker, Not Under Power.FPS-004 -C Ask for Price

50” x 113” Hooper 4C, Flexo Printer Slotter,Sun Lead Edge Feed, Harper FlexoConversion, Vaccum Transfer, Not UnderPower.FPS-005-C Ask for Price

15

50” x 110” Langston 2C Flexo PrinterSlotter, Under Power.FPS-006-D Make an Offer

50" x 113” Hooper 3C, Flexo Printer Slotter,General Vaccum Feed Table, ElectricRunning Registers, Electric FrameOpening, Poly Covered Print Cylinders,Mathew Die Locks, ASC Prefeeder, NotUnder Power.FPS-007-C Make an Offer

50” x 110” Simon 4C, Flexo Printer Slotter,4C, Deritend Vaccum Feeder, BottomPrint Units, Print Unit 1 and 2 Anilox toRubber Roll Print Cylinder, Print 3 and 4,Chambered Doctor Blade (2014), Auto SetSlot Crease, Rotary Die Cut Unit Top dieForm Bottom Poly anvil, Beater StripperStacker.FPS-008-I $120,000 USD

50” x 110” Isowa 3C, Flexo Printer Slotter,Model FP-90, Year: 2003, Max. Sheet: 1210x 2475 mm, Min Sheet: 300 x 785 mm, Max.Print Size: 1200 mm x 25650 mm, Max.Speed: 200 spm, Stacker, OzonePrefeeder, Suction Transfer System, SingleSlotter, Under Power. Available September2016.** Video Available**FPS-010-B $220,000 USD

50" x 100" Isowa Flexo Printer Slotter 3C,Model FP-80 Miranda, HandholeEquipment, UMETANI Pre-Feeder, MIKAWAStacker, Max. Sheet: 1220 x 2500 mm, MinSheet: 585 x 260 mm, Max. Speed: 160spm, Under Power. Video Available.FPS-011-B Ask for Price

50" x 113" Koopers 1C, Flexo Printer Slotter,Harper Conversion, Sauer attachmentsNEW, 108" Greene Lone Sheet Stacker,Model Stackmaster, Electric Eye, S/N113782, Not Under Power.FPS-012-C Make an Offer

90” x 145” Bendazzolli Jumbo Flexo PrinterSlotter, 2C, Automatic Feeder, MotorizedSlotter, RDC, Stacker. Under Power.FPS-013-G Make an Offer

NEW LISTEDBOBST Flexo 200, 6 Colors, Bottom Printing,Year:1990 ,Max. Size 2032 mm x 1270 mm,Speed 5500sph, Alliance PrefeederAvailable, Exellent Conditions, UnderPower.FPS-015-G Ask for Price

NEW EQUIPMENTNEW Marumatsu JUMBO Flexo PrinterSlotter, 1C or 2C, Sizes 86” x 185” or 86” x205”, Speed 50 Sheets/Min, Chain FeedSystem, Mathews Die system, Hand HoleEquipment.FPS-014-F Request a Quote

PRINTER SLOTTER LETTERPRESS

42” x 94” Langston, 2C, Printer Slotter,Model VP, Martin Stacker, SauerAttachments, Not Under Power.PS-001-C $9,000 USD

32" x 78" Langston Printer SlotterLettepress, 2C, Model VP, No Stacker, NotUnder Power, One Color Needs Repair.PS-002-D $9,000 USD

16

NEW LISTED35” x 78” Hooper Printer Slotter, S/NSE2P255, 1956, Kicker Feed, ElectricRunning Registers, Manual FrameOpening, Martin Stacker, Under Power.PS-003-C $9,000 USD

63” X 126” Global Printer SlotterLetterpress, 2 Colors, No Stacker. UnderPower. Location MEXICO. ** VideoAvailable**PS-004-D Make an Offer

FLEXO FOLDER GLUERS

Martin Miniline 616, 2C, 1996, Sun Feeder,Automatic Slotter, Rotary Die Cut Section,Counter Ejector, Very Good Conditions.Under Power.FFG-001 Make an Offer

35” x 78” Curioni Flexo Folder Gluer, 1C,Vacuum Assist Kicker Feed, Under Power.FFG-002 $26,500 USD

35” x 75” Piemonte Meccanica 3C, FlexoFolder Gluer, Model 1900, Max. Sheet 1900mm x 900 mm, Motorized Slotter,Automatic Feeder.FFG-003 Make an Offer

35” x 85” Koopers 2C, Flexo Folder Gluer,Year: 1973, Sun Lead Edge Feed, CounterEjector, Under Power. ExcellentConditions. Video Available.FFG-004 Make an Offer

38” x 80” S&S 2C, Flexo Folder Gluer,Model ZLM, S/N 90107, Prime Lead EdgeFeed, Metal Print Cylinders, Roll to Blade,Motorized Heads, DC Section, Copar GlueSystem, Vaccum Folding, Counter Ejector,Complete Electrical Upgrade (2013). NotUnder Power.FFG-005 Make an Offer

37” x 82” Langston 2C, Flexo Folder Gluer,1975, SN 741833, Vaccum Assist KickerFeed, Electric Running Registers, ElectricFrame Opening, Roll to Roll Printing,Motorized Heads & Rails, Scrap Conveyor,Valco Glue System, Folding Section withRods, Counter Ejector, Stacking Corner,Under Power.FFG-006 $55,000 USD

37” x 82” Langston 3C, Flexo Folder Gluer,Model FC311, Sun Lead edge Feed, ACDrives, Electric Running Registers, ElectricFrame Opening, Motorized Slotting, DieCut Section, Right Angle Scrap Conveyor,Valco Glue System, Folding Section,Counter Ejector, Mosca Bundle Tyer withSquaring , Model RO-TRS-4, Under Power.FFG-007 $275,000 USD

37” x 97” Langston 3C, Flexo Folder Gluer,Model Saturn III, Sun Feed, Electric FrameOpening and Running Registers MetalPrint Cylinders, Glue Unit, Motorized DualSlotting, Folding Section, Counter Ejector,Year:1997, Under Power.FFG-023-C Make an Offer

38” x 96” Ward 2C, Flexo Folder Gluer,Model 11500, S/N 115126 CD F2BZSYG1CNC, Year: 1998, Lead Edge Feed, SteelPrint Cylinders, Electric Running Registers,Electric Frame Opening, Motorized Headsand Rails, Valco Glue System, ElectronicUpgrade, Folding Section, CounterEjector, Scrap Conveyor Included.FFG-008 $250,000 USD

38” x 90” MHI, 3C, Flexo Folder Gluer,Model Summit II 100, RDC, Year: 1991,Max. Sheet Size 1000 x 2555 mm, Min.Sheet Size 260 x 750 mm, Max. Print Size:960 mm x 2270 mm, Printing Die Thickness:7.2 mm, Speed 300 spm, Anilox RollChrome #180 ( 3 Print Units). Spare Parts.Under PowerFFG-009 $260,000 USD 17

37” X 97” Langston 2C, Flexo Folder Gluer,Saturn II, Year: 1979, Vaccum Assist KickerFeed, Electric Running Register, MetalFrame Opening, Metal Print Cylinders, Rollto Roll Metering, Dual Slotting Section,Valco Glue Unit, Saturn II Folding Section,Counter Ejector, Under Power.FFG-010 $145,000 USD

43” x 94” Emba 2C Flexo Folder Gluer, S/N7810515, Year: 1981, Model 240, LeadEdge Feeder, Valco Glue System,Extended Folding Section, ARC DoyleCounter Ejector, Spare Parts: 2 Anilox Roll ,2 Rubber Rolls, Under PowerFFG-011 $35,000 USD

43” x 94” Emba 2C Flexo Folder Gluer,Model 240, Emba Feeder, Valco GlueSystem, Under Power.FFG-023-C $45,000 USD

Martin Transline 1228, Prefeeder RODAFPKS 2800, Feeder Corpart Rotofeed, 4Colors, Motorized Slotting Heads, Die CutSection, Rapidex Taper Stitcher, GluingSystem Container Technics CT-5000,Counter Ejector, Mosca Bundle Tyer, PCfor adjustment MPC. Under PowerFFG-012 Make an Offer

Martin 1224 Flexo Folder Gluer, 4C, TopPrinting with Computer Setting, Lead EdgeFeeder, Valco Glue System, Max. Sheet1100 x 2480 mm, Min Sheet 295 x 480 mm,Skip Feed 1600 mm, Year: 1990, MOSCAMCB 2 Auto Bundle Tyer (2010), UnderPower, Video Available. ** Available July2016**FFG-013 Make an Offer

50” x 110” Martin Transline 1228 FlexoFolder Gluer, 4C, Sun Lead Edge Feeder,Sun Rainbowgraphics Blade System, SteelPrint Cylinderes, Electric Running Registers,Motorized Frame Openings, MotorizedSlotting Heads, Die Cut Section, CoparGlue System, Folding Section, CounterEjector, Under Power. Available 2016.FFG-014 Make an Offer

Martin Midline 924, 4 Colors, Feeder withBelts, Format 2400 x 920 mm, Auto Slotter,Rotary Die Cut Section, Folder Gluer,Counter Ejector, Roda Prefeeder, CyclopBundle Strapper, Overhauled in 2006, VeryGood Condition.FFG-015 Ask for Price

Martin Midline 924, 4 Colors with RapidsetSystem, Year: 1989, Serco FeedmasterPrefeeder, Size 2400 x 920 mm, Speed18000 sph, Automatic feeder withVaccum Pump, Motorized Slotter, RotaryDie Cutter, Folding Section, CounterEjector, PLC system, Under Power.FFG-016 Ask for Price

50" x 110" Langston 3C, Flexo Folder Gluer ,RDC, Year: 1985, Kicker Feeder, CeramicAnilox Rolls, Roll to Roll System, ElectricRunning Registers, Elecric Frame Opening,Motorized Heads, Motorized Rails,Miscellaneous Spare Parts. Under Power.Conveyor and Tyer are not Included.**Video Available**FFG-017 $195,000 USD

50" x 110" S&S 2C Flexo Folder Gluer,Model ZLR, Sun Lead Edge Feeder, ElectricFrame Opening, Metal Print Cylinders,Blade Metering, Glue System, Foldingsection, Counter Ejector, Not UnderPower.FFG-018-C $85,000 USD

50" x 110" Langston 2C Flexo Folder Gluer,Model Saturn II, S/N 782877, Year: 1979,Rotofeed Lead Edge Feeder (1994),Electric Running Registers, Eletric FrameOpening, Roll to Roll Printing, Valco Gluesystem, Folding Section, Saturn II CounterEjector, Under Power.FFG-019-C $95,000 USD

18

NEW LISTED50” x 113” Langston 2C, Flexo FolderGluer, Model Saturn II, S/N 813645,Year:1985, TEI Prefeeder, Sun Lead EdgeFeeder, Electric Frame Opening, ElectricRunning Registers, Motorized SlottingSection, Vacuum Assist Folding Rails,Vlaco Glue System, Pacesetter ComputerControls, Signode Bundle Tyer, LoadFormer, Under Power. **AVAILABLENOVEMBER**.FFG-022-C Make an Offer

50" x 113" Ward 2C, Flexo Folder Gluer,Year:1981, Model 2BSYGE-NC, Sun LeadEdge Feed, Electric Running Registers,Electric Frame Opening, Motorized Heads,Motorized Rails, Valco Glue System, WardCounter Ejector, Under Power.FFG-018 Make an Offer

50” x 110” TECASA 2C, Flexo Folder Gluer,Model F-1300, Year: 1995, Sun feed,Automatic Slotting Section, FoldingSection, Gluer Unit. Under Power.FFG-019-D Ask for Price

66”x 125” Ward 2C, Flexo folder Gluer,Sun Feeder, Electric Running Registers,Electric Frame Opening, Metal PrintCylinders, Motorized Heads & Rails, ValcoGlue System, Counter Ejector, Not UnderPower.FFG-020 $175,000 USD

66” x 128” Martin 1632. 2C, Flexo FolderGluer, Pre Feeder (1998), Slotter. Die CutSection, Folder Gluer Valco, RapidexStticher 2 Heads in line, Counter Ejector,Mosca Bundle Tyer (2004), Stacker withSide Tracking, 90” Bundle Conveyor,Central Computer.**Available May/Jun2016**FFG-021 Make an Offer

REDUCED PRICE66” x 144” Langston/Greenwood 2C,Flexo Folder Gluer, Lead Edge Feed,Magnetic Print Cylinders, ManualRunning Registers, Valco Glue System,Folding Section, Counter Ejector, UnderPower.FFG-023- C $75,000 USD

GLUERS

Goodswill Semi Automatic Gluer, Speed40-50 Sheet/Minute, Max. Sheet Size 1350x 1500 mm, Min. Sheet Size 240 x 260 mm.Max Glue Lap 45 mm, Stack Hight 1000mm, Total Power 3 ¾ HP. Under Power.GL-001 $25,000 USD

General Gluer with Lift, Cold Glue, Under Power. Video Available.GL-002 $15,000 USD

LABORATORY TESTING

NEW EQUIPMENTNEW ECT Tester, a compression strengthtest instrument developed according tothe specification of standard. It appliesto the test of Ring Crush Test (RCT), EdgeCrush Test (ECT), Flat Crush Test (FCT)PinAdhesion Test(PAT), Concora corrugatedboard and test(CCT) and ConcoraMedium Test(CMT).LAB-001 Request a Quote

NEW EQUIPMENTNEW Box Compression Tester, for testingbox compression strength of boxes andcartons. The testing machine is capableof various functions for all parameters instandards, such a parametric test,display, memory, statistics and printfunction; data processing function togain the statistical result of all parametersdirectly; and automatic reset and faultdiagnosis function and easy operation.Available in different sizes.LAB-002 Request a Quote 19

LAMINATORS

43” x 63” Tunkers Laminator, 1998, Model1100, 1500 sph, automatic feeder,compression section.LM-001 $55,000 USD

Stock Automatic Laminator, Model D 6325,Year: 1998, Mirus Automatic Feeder, Max.Size 1600 mm x 1400 mm, Min . Size 500 mmx 500 mm.LM-002 Make an Offer

85”x82” General Laminator, Sport of full sizelabels, Manual feed both label andcorrugated, Minimum: 12” x 12”,440 volts, 3phase.LM-003 Make an Offer

Tunkers Semi-Automatic Litho Laminator,SBE-P 1100 (year 1984), Spot Labeler (year1985),Automatic Substrate Feeder, ManualLabel Feeder,Pneumatic Glue Pump,Compression Squeeze Rollers.LM-004 Make an Offer

LOAD FORMERS

72” ASC Load Former, Year: 1990, ModelULF-L-660-P, Pit Style, 480 volts, 3 Phase, 60Hz, Not Under Power.LF-001 Make an offer

72” ASC Load Former, Model LH-SLF-560-P, Year: 1996, Not Under Power.LF-002 $18,000 USD

72” ASC Load Former, Model ULF-L-560 PT, Year: 1998, Not Under PowerLF-003 Make an offer

MISCELLANEOUS

Bay Bundle Breaker, Model 66-BB-2, S/N 3022-A, 2006.MS-001 Make an offer

GENIE Scissor Lift Model GS-1930, Year:2008, Hours: 165, Max. Working Height: 26,6ft, Max Platform Weight Capacity: 600Libras, Deck Extension: 35.8 in, Extensio DeckCapacity: 250 Libras, Wheelbase: 4,3 ft,Electric, New Batteries, Excellent Condition.MS-002-A $8,900 USD

2000 POLAR 115 ED Paper Cutter, 45" FullyProgrammable Cutter with Air Table, PolarRA4 Jogger, 1989 Baumann NUP 10 FO PileLift (10,000 Kg. Scale)MS-003 $39,500 USD

POLAR Mohr 137, 54” Paper Cutter, Side AirTable, Blade Changing Tools and ExtraCutting Blade, Good Conditions.MS-004 $22,000 USD

POLAR 115 EMC 45. Year: 1985, New StyleMicrocut, Video AvailableMS-005 $21,000 USD

Polar Mohor, Model 92 CE, Serie 4711368, 2Extra Blades, Video Available.MS-006 Make an Offer

20

OFFSET PRINTER

36” x 50” Miehle Roland Offset Printer, 2C,Model 49TC, Year: 197.OFF-001 $59,000 USD

47” x 63” Nebiolo Colora 8000, 6 Color +Varnishing, Model 663L+C, Year: 1992,Remote control ink and register TGCGrafitel (1998), Colour-monitors with touchscreen, Mabeg feeder, Steel plate atfeeder and delivery Feeder and deliverycontrol via monitors, Non stop unit atfeeder and delivery, Anti-static: SIMCO,Size adjustment at feeder, Double sheetcontrol, Side lay control, Quick actionplate clamps, Laser spitted colour knives,Alcodamp dampening, Cooling + aquapress system , Washing device for blankedcylinder, Coating unit, Powder spray:Weko T 77 , Baldwin Sheet Decurler, IRdryer in the deliver.OFF-002 $100,000 USD

PARTITION ASSEMBLERS

17" x 27" Bostitch/Milwaukee PartitionAssembler, Model 733, 6 Chutes, Max: 27"x 27" x 13", Min: 6" x 4" x 21/8", S/N C92574,Year: 1973.PA-001 Make an Offer

RODA Lugano Partition Slotter andPartition Assembler, Year: 1989, S/N 45, NotUnder Power.PA-002 Ask for Price

PARTITION SLOTTERS

24” x 63” Hooper Partition Slotter, KickerFeed, Understacker, Numerous Heads, NotUnder Power.PS-001 Make an Offer

23” x 67” S&S Partition Slotter, Kicker Feed,Belt Takeoff, Under Power.PS-002 Make an Offer

PREFEEDERS

ASC Prefeeder Model SPB 72 x 100-a-210,S/N 1505300, Block Push, 480 Volts, Max.72” x 100”, Not Under Power.PF-001 Make an Offer

Feedmaster Prefeeder. Model TF 60-113,Year: 1995, Top Feeder, Top Printing Finish,575 Volts, 3ph, 50 hz. Not Under Power.PF-002 Make an Offer

TEI Prefeeder, Year: 2001, S/N 16971, 210”Extension, Under Power. Video Available.PF-003 Make an Offer

ROTARY SLOTTER

90" x 190" Bendazzoli, 1 Color, Flexo RotarySlotter, Easy Feed Prefeeder, Slat Feed,CMI Blade Conversion.RS-001 Make an offer

86x185 UNIVERSAL, 2C, Flexo Rotary Slotter,Slat Feed – Harper Wiper BladesConversions – Harper Die Cut SectionSauer Slotting Heads – (2) Lift Tables (2)Conveyor Transfer Sections, (2) GreeneLine Load Turners Greene Line Sheet

Stacker.RS-002 Make an offer

21

SAMPLE TABLE

NEW EQUIPMENTNEW ACS Sample Table , AS Series,Horizontal and Vertical Model Avaiable,Easy Productions, Shortening of hours,Mold Unnecessary, Accurate dimensionaladjustment, Easy production forprototype, Meet small order prompty,CAD Software Included.ST-001-B REQUEST A QUOTE

75” x 86” Data Technology Sample Table,Model DT22000, Under Power.ST-002-C $22,500.00 USD

75” x 120” Data Technology Sample Table,Model DT3000, Under Power.ST-003-C $20,000.00 USD

75” x 120” Data Technology Sample Table,DT3000, Max Sheet 92” x 140”, Include:Reciprocating Knife, Crease Tool,Alignment Crosshair, 1 Pen, OPTIONAL:Drag Knife, 2” Foam Knife, CADCompatibility: HPGL, DXF, Software NotIncluded.ST-004-A $55,000.00 USD

89” x 120” Data Technology Sample Table,Model 3000W, Max Sheet 92” x 124”,Include: Reciprocating Knife, Crease Tool,1 Pen, OPTIONAL: Drag Knife, 2” FoamKnife, CAD Compatibility: HPGL, DXF,Software Not Included.ST-005-A $65,000.00 USD

90” x 66” Data Technology Sample Table,Model 9066, Max Sheet 82” x 96”, Include:Reciprocating Knife, Crease Tool, DragKnife, Light Pen, CAD Compatibility: HPGL,DXF, Windows Frontend Software.MATERIAL CAPABILITY: Corrugated boardthru Double Wall, Foam, Fiberboard,Folding Carton.ST-006-A $30,000.00 USD

66” x 46” Data Technology Sample Table,Model DTC6646, Cutting Area 66” x 46”,One Precision Drag Knife, Two StandardDrag Knifes, One Creasing Tool, TwoPlotting Pens, Windows Frontend Software,Good Working Conditions.ST-007-A $30,000.00 USD

66” x 86” Konsberg Sample Table, ModelCM1320, Under Power, Software NotIncluded.ST-007-C $18,500.00 USD

SHREDDER

Hammermille Cardboard Shredder, 25HP, 48” In Feed, 36” Out, Whole System Included.SH-001-I $17,500.00 USD

STACKERS

REDUCED PRICE80” Martin Sheet Stacker, Under Power,Good Condition. Video Available.ST-001-C $6,000 USD

125” Curioni Automatic Sheet Stacker forPrinter Slotter.ST-002 $12,000 USD

115” Bay RDC Stacker, Shaker beatersection, Electronic counter interface,Large LED for desired count stack, Airaccumulator.ST-003 Make an Offer

115” Hycorr Die Cut Stacker. Not Under Power.ST-004 Make an Offer

130” Piemonte Die Cut Stacker.ST-005 $60,000 USD

NEW LISTED144" Greene Line Stacker, ModelStackmaster, S/N 1517 A2, Width 94”,Length 172”, Hight 57”, Weigth 8000 lbsST-006-D $17,000 USD 22

SLITTER SCORER

110" Goepfert Slitter Scorer, Model KSD150/26, Year:2004, Board Thickness 3 to 15mm, Air Shafts, Excellent Condition.SS-001 Make an Offer

110” Curioni Slitter Scorer, Manual Feeder,Excellent Conditions.SS-002 Make an Offer

120" 4-Bars Slitter Scorer, Steel Table,Numerous Heads, Side Guides, ConstantSpeed, Not Under Power.SS-003 $12,000 USD

SEIKO Automatic Set Up Sliter Scorer, S/N00108, 6" Shafts Both Slitter and ScoringShafts, Gear Box is jammed. Not UnderPower.SS-004 Make an Offer

120” S&S 4-Bars Slitter Scorer, ConstantSpeed, Not Under Power, GoodCondition.SS-005 $9,500 USD

NEW LISTED120” Universal 4-Bars Slitter Scorer, NotUnder Power, Good Condition.SS-006 $10,000 USD

NEW LISTED96" S&S 4 Bar Slitter Scorer, 6" DiameterShafts, Side Guides, Steel Table, (5) Sets ofKnives, (8) Sets of Scores, 240 Volts, UnderPower.SS-007-C $9,000 USD

STITCHERS

585 Bostitch Stitcher, Model 585H. Lift,Crittenden Conversion, Max Box 76” x 48”x 64-81”, Min Panel: 6” x 6” x6”. Floorspace 18’ x 12’ x 8’. Not Under Power.ST-001-C Make an Offer

950 Bostitch Stitcher with Lift, Model 950 H,51” Throat, Crittenden Conversion, BeltTakeoff, Not Under Power.ST-002-C $15,000 USD

Rapidex 2PC 1000, Heavy Duty Twin head2 piece Stitcher with elevating table,Operator Walkway and stacker, IncludesMany Spare Parts including 2 stitchinghead formers and cuttersYear: 1983, Under Power.ST-005-H $43,000 USD

NEW Marumatsu Twin Head Stitcher,Model OMTSN and NCTS Available, MaxBlank Size: 2400 mm.ST-005-B REQUEST A QUOTE

STRETCH WRAPPERS

Lantech S300 Semi-Automatic StretchWrap, Speed 25-35 Loads/Hr, Max. LoadDiagonal 76", Max. Load Height 80", Max.Load Weight Floor Capacity, Wrpa ArmZone 90", Wrap Arm Drive 3/4 HP TEFC,Wrap Arm Speed (Variable) 12 RPM, PalletGrip Standard, Film Delivery System PowerRoller Strecth, Standard Pre-Stretch 200%,EZ Thread Roll Carriage Standard, FilCapacity, 10" Roll Diameter, Standard FilmWidht 20".SW-001 Make an Offer

WAXERS

ASHDEE Curtain Wax Coater, 85” (2160mm), Strem Feed, Sheet Stacker.WAX-001 Make an Offer

23