September’s 2010 - 50 Backlink Packet

First I would like to thank you for subscribing to Paul’s Quality Backlinks; I assure you that you will really enjoy this

service and the quality of the backlinks I provide. Also, before you start link building, there’s some important

information you should know regarding backlinks.

You may have heard from people that do not have complete knowledge about Search Engine algorithms, say that

leaving your link on an “inner page” that has a low or 0 Page Rank inside of a high Page Rank domain will do your

link no good. This is completely false.

I have several websites ranking very high on the first page of Google (five of which, are number one) out of

hundreds of thousands of competing sites. The demo site (http://howtomakeadiapercakehq.com) that I use for

these links, is sitting on the first page of Google, on the 1st

spot out of over 338,000 sites for the keyword “how to

make a diaper cake”, this site also carries a Page Rank of 4. I have done all this by using this same method of linking

in inner pages of high PR authority sites. These links are simply amazing, and they will do wonders for your

keywords & sites. Imagine if you only have to complete with 250,000 or less competing sites, you will be able to

dominate your competition!

Matt Cutts, the head of Google’s webspam team was asked about above statement, but he couldn’t give a straight

answer due to the question being too close to Google’s algorithm. You will find part of the interview below.

“Stephan Spencer: OK. So, I guess, a follow on to that would be: a .edu and .gov link, and so forth, has, typically,

a more pristine link neighborhood, so it is not just about the PageRank, right? The link neighborhood comes into

play.

Matt Cutts: That is a little bit of a "secret sauce" question, so I am not going to go into how much we do trust

that sort of stuff.

Stephan Spencer: OK. I am going to slap my wrist now. Ouch, ouch!

Matt Cutts: [laughing]”

For the entire interview: http://www.stephanspencer.com/search-engines/matt-cutts-interview

Note: If you’re not already subscribed to Angela V. Edwards monthly backlink packets, I highly urge you to do so

now. Angela is a long time member of the Warrior Forum, and she has a program that provides you with 30 new

High Page Rank (PR.4 – PR. 9) backlinks at the cost of only $5 per month, with your first packet being free. We are

not in any way competing with each other, but rather working as a team to provide you with the largest amount of

the highest quality backlinks you can obtain every month. With both of our programs combined, you will get the

maximum search engine results that you can get without spending hundreds or even thousands of dollars a month.

Click here for Angela’s program: http://www.easybacklinkbuilder.com/

http://www.swellinfo.com/ - Page Rank 5

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “User CP” link

Next, click on “Edit Your Details” link

Then put your Website URL on the “Homepage URL” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://alachuaconservationtrust.org – Page Rank 4

First you will want to register

Registration Link: http://alachuaconservationtrust.org/index.php?/member/register

After you have registered, you will need to go to

http://alachuaconservationtrust.org/index.php?/member/login

Next, go to http://alachuaconservationtrust.org.lhost7.atlantic.net/index.php?/member/profile/ and

click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.fpcgermantown.org - Page Rank 4

First you will want to register

Registration Link: http://www.fpcgermantown.org/index.php/member/register

After you have registered, you will need to go to

http://www.fpcgermantown.org/index.php/member/login

Next, go to http://www.fpcgermantown.org/index.php/member/profile/ and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.thewaterisopen.com/ - Page Rank 5

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “Your Control Panel”

Now, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Your Public Profile” link

Here’s the public view of your anchor text links

http://www.bahamasissues.com/ - Page Rank 5

First you will want to register

Registration Link: http://www.bahamasissues.com/register.php

Once you have registered, click on “Settings” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.spiritatwork.org - Page Rank 5

First you will want to register

Registration Link: http://www.spiritatwork.org/index.php/forums/member/register

After you have registered, you will need to go to

http://www.spiritatwork.org/index.php/forums/member/login

Next, click on “Your Control Panel” link

Then click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links. (Note: You need to logoff first to see your public links)

http://www.docusign.com/ - Page Rank 5

First you will need to click on the tab that says “DocuSign Forum”

Now, you will need to register a new account

Next, click on “User CP” link

Then click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.sprintusers.com/ - Page Rank 5

First you will need to click on the tab that says “SU Forum”

Now, you will need to register a new account

Once you have registered, click on “User CP” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on “Your Profile” link

Here’s the public view of your anchor text links

http://www.fnhc.ca/ - Page Rank 5

First you will want to register

Registration Link: http://www.fnhc.ca/index.php/member/register

After you have registered, you will need to go to http://www.fnhc.ca/index.php/member/login

Next, go to http://www.fnhc.ca/index.php/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://dern.org.au/ - Page Rank 5

First you will want to register

Registration Link: http://dern.org.au/member/register/

After you have registered, you will need to click on “My Profile”

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.boonex.us/ - Page Rank 4

First you will want to join

Registration Link: http://www.boonex.us/join.php

After you have joined, you will need to click “Edit profile info” link

You are given a WYSIWYG editor to create your anchor text links in the “Description” section

To see the public view of your anchor text, click on your profile icon

Here’s the public view of your anchor text links

http://www.golden-gate-park.com/ - Page Rank 5

First you will want to register

Registration Link: http://www.golden-gate-park.com/index.php/forums/member/register

After you have registered, you will need to go to http://www.golden-gate-

park.com/index.php/forums/member/login/

Next, click on “Your Control Panel” link

Now, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://webringworld.org/ - Page Rank 5

First you will want to create an account

Registration Link: http://webringworld.org/user.php

After you have created an account, click on “Change your info” link

To create your anchor text, use your HTML code in the “Signature” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, go to “Members Area” and click on “Members List”

Now, click on your username

Here’s the public view of your anchor text links

http://www.fiveoclockdallas.com – Page Rank 4

First you will want to create a new account

Registration Link: http://www.fiveoclockdallas.com/user/register

After you have registered, click on “Edit” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section

To see the public view of your anchor text, click on “View”

Here’s the public view of your anchor text links

http://mytidewatermoms.com/ - Page Rank 6

First you will want to create an account

Registration Link: http://mytidewatermoms.com/user/register

After you have registered, click on “Edit” link

Next, c lick on “Personal Information”

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “View”

Here’s the public view of your anchor text links

http://www.allprodad.com/videos/ - Page Rank 5

First you will want to sign up

Registration Link: http://www.allprodad.com/videos/signup.php

After you have registered, click on “My Profile” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Community”

Then search on your username

Here’s the public view of your anchor text links

http://assault.cubers.net/ - Page Rank 5

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “User CP”

Next, c lick on “Change Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on “Member List”

Then search for your username

Next, click on your username

Here’s the public view of your anchor text links

http://edgepointchurch.com/ - Page Rank 4

First you will want to register

Registration Link: http://edgepointchurch.com/member/register

After you have registered, you will need to go to http://edgepointchurch.com/member/login

Next, go to http://edgepointchurch.com/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://vasculardiseasemanagement.com/ - Page Rank 5

First you will want to register

Registration Link: http://vasculardiseasemanagement.com/user/register

After you have registered, click on “My Account” link

Next, click on “Edit” tab

Now, click on “My Information” link

To create your anchor text, use your HTML code in the “My Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://ican-online.org/ - Page Rank 5

First you will want to register

Registration Link: http://ican-online.org/user/register

After you have registered, click on “My account” link

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://scadarmenia.org/ - Page Rank 5

First you will want to register

Registration Link: http://scadarmenia.org/member/register

After you have registered, you will need to go to http://scadarmenia.org/member/login

Next, go to http://scadarmenia.org/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://moviepals.org/ -Page Rank 4

First you will want to create a new account

Registration Link: http://moviepals.org/user/register

After you have registered, click on “My Account” tab

Now, click on “Edit” link

Next, click on “Profile” link

You are given a WYSIWYG editor to create your anchor text links in the “What is your

background and experience” section

To see the public view of your anchor text, put your mouse over “My Account” tab, you will see a drop

down menu, click on “My Profile” link

Here’s the public view of your anchor text links

http://isp-control.net/ - Page Rank 6

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

After you have registered, click on “User CP” link

Then click on “Change Signature”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on “Member List”

Then search for your username

Now, click on your username

Here’s the public view of your anchor text links

http://www.thomasbrewton.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.thomasbrewton.com/index.php/member/register/

Once you have registered, click on “Your Account” link

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.pollenblog.com.au/ - Page Rank 5

First you will need to click on the link that says “Comments”

Now, you will need to register a new account

After you have registered, click on your username

Then click on “Your Control Panel” link

Now, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.edmontonreptiles.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.edmontonreptiles.com/forum/register.php

Once you have registered, click on “Profile”

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.citizensky.org/ - Page Rank 6

First you will want to register

Registration Link: http://www.citizensky.org/user/register

Once you have registered, click on “Edit” tab

Then click on “Optional Personal Information” link

You are given a WYSIWYG editor to create your anchor text links in the “Background/Interesting Fact”

section

To see the public view of your anchor text, click on “View”

Here’s the public view of your anchor text links

http://opensource.com/ - Page Rank 6

First you will want to Sign up

Sign up Link: http://opensource.com/user/register

Once you have registered, click on “Edit” link

Next, click on “Personal Information” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “View”

Here’s the public view of your anchor text links

http://www.bmxplusmag.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.bmxplusmag.com/index.php/member/register

After you have registered, you will need to go to

http://www.bmxplusmag.com/index.php/member/login

Next, go to http://www.bmxplusmag.com/index.php/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.connect2mason.com – Page Rank 5

First, click any story that interests you

Then click on “Add new comment”

Now, you will have to “register” for an account

Next, click on your username

Then click on “Edit” link

Click on the link that says “Blog”

You are given a WYSIWYG editor to create your anchor text links in the “About the user” section of your

page.

To see the public view of your anchor text, click on “View” link

Here’s the public view of your anchor text links

http://www.poopreport.com – Page Rank 5

First you will want to register

Registration Link: http://www.poopreport.com/?q=user/register

After you have registered, you will need to click on “edit” tab

Next, click on “Personal Information” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.ergpa.com.au/ - Page Rank 4

First you will want to register

Registration Link: http://www.ergpa.com.au/member/register

After you have registered, you will need to go to http://www.ergpa.com.au/member/login

Next, go to http://www.ergpa.com.au/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://lessonopoly.org/svef/ - Page Rank 5

First you will want to create a new account

Registration Link: http://lessonopoly.org/svef/?q=register

Once you have registered, click on “My Blog” link

Next, click on “New Blog” link

You are given a WYSIWYG editor to create your anchor text links in the “Body” section of the blog

To see the public view of your anchor text, click on the title of the blog you just created

Here’s the public view of your anchor text links

http://www.milkandcookies.com/ - Page Rank 5

First you will want to create an account

Registration Link: http://www.milkandcookies.com/user/create/

Once you have created an account, click on “Edit Profile” link

To create your anchor text, put your URL in the section that says “Homepage URL” and place your

keyword in the “Homepage title” box. Your title will become your anchor text keyword

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.planewalker.com/ - Page Rank 4

First you will want to register

Registration Link:

http://www.planewalker.com/user/register?destination=comment%2Freply%2F10420%23comment-

form

Once you have registered, click on “Edit” link

Next, click on “Contact” link

Now, put your Website URL on the “Website” section

To see the public view of your anchor text, click on “View”

Here’s the public view of your anchor text links

http://www.e164.org/ - Page Rank 5

First you will need to click on the tab that says “Support Forum”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also put your URL in

the section that says “Website URL” and place your keyword in the “Website title” box. Your title will

become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.skotos.net/ - Page Rank 5

First you will need to click on the tab that says “Forums”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.fandy.com/ - Page Rank 5

First you will want to create an account

Registration link: http://www.fandy.com/user/register

Once you have registered, click on “Edit” link

Next, click on “My Bio” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “View” tab

Here’s the public view of your anchor text links

http://www.funkyvenues.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.funkyvenues.com/member/register

After you have registered, you will need to go to http://www.funkyvenues.com/member/login

Next, go to http://www.funkyvenues.com/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.rige.net/ - Page Rank 4

First you will want to register

Registration Link: http://id.rige.net/newaccount.php

Once you have registered, click on “Profile” link

Next, click on “Edit Signature”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on the links that says “Quick Links” you will see a drop

down menu, click on “My Profile”

Here’s the public view of your anchor text links

http://jci.livemap.de/ - Page Rank 5

First you will want to join

Join us Link: http://jci.livemap.de/index.php?option=com_comprofiler&task=registers

Once you have joined, click on “Edit your profile” link

Next, click on “Biography” tab

You are given a WYSIWYG editor to create your anchor text links in the “Biography” section

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.femaleforum.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.femaleforum.com/forums/member/register/

Once you have registered, click on “My Account” link

Then click on “Edit Profile” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text links, click on “Forums”

Now, click on your username

Here’s the public view of your anchor text links

http://www.visualarts.net.au/ - - Page Rank 6

First you will want to create a new account

Registration Link: http://www.visualarts.net.au/user/register

After you have registered, click on “Edit My Profile” link

Next, click on “Artist Gallery” link

You are given a mini WYSIWYG editor to create your anchor text links in the “Artist Statement” section

To see the public view of your anchor text links, click on “Artist Gallery” tab

Here’s the public view of your anchor text links

http://www.forestforum.co.uk/ - Page Rank 4

First you will want to register

Registration Link: http://www.forestforum.co.uk/register.php

Once you have registered, click on “Profile” link

Next, click on “Edit Signature”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on the “My Profile” link

Here’s the public view of your anchor text links

http://www.marksdailyapple.com/ - Page Rank 6

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on the “My Profile” link

Here’s the public view of your anchor text links

http://www.mountaingirl.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.mountaingirl.com/index.php/member/register

After you have registered, you will need to go to

http://www.mountaingirl.com/index.php/member/login

Next, go to http://www.mountaingirl.com/index.php/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.dance.com/ - Page Rank 5

First you will need to click on the tab that says “Blog”

Now, you will need to sign up a new account

Next, click on “My Profile” link

Then click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Return to My Profile Page”

Here’s the public view of your anchor text links

http://en.eyeka.asia/ - Page Rank 5

First you will want to create an account

Registration Link: http://en.eyeka.asia/signup?a=1

Once you have registered, click on the link that says “Edit”

To create your anchor text, use your HTML code in the “About the author” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://girlsaloud.forums.umusic.co.uk/ - Page Rank 4

First you will want to join

Join Link: http://girlsaloud.forums.umusic.co.uk/user/CreateUser.aspx?ReturnUrl=

Once you have joined, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “view public profile”

Here’s the public view of your anchor text links

http://www.andpva.com – Page Rank 5

First you will want to create an account

Registration Link: http://www.andpva.com/user/register

Once you have created an account, click on “Edit Profile” link

You are given a WYSIWYG editor to create your anchor text links in the “Bio” section

Once you saved your changes, you will be taken to the public view of your anchor text links

---------- BONUS SITE ----------

As a bonus, I included an affiliate web site that is an alternative to clickbank. High Profit offers high

payout amounts on its products and has an amazing conversion rate.

http://www.highprofits.com/

First you will need to click on the tab that says “Forum”

Now you will need to register a new account

Once you have registered, click on the “Profile” link

Next, you will need to click on the “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links