ser-ductor air-less agitation combines pumps . … bulletin tf-144a july 1999 pretreatment...

FOUR EASY STEPS TO BETTER CLEANING TECHNICAL BULLETIN TF-144A JULY 1999 Pretreatment cleanliness assures good finishes on your parts. Keep them clean and oil-free. .. easily and economically with SERFILCOengineered filtration, coalescing and carbon systems. Use SER-DUCTOR@ systems for uniform agitation . SER-DUCTOR air-less agitation combines pumps and eductors to increase solution circulation for better impingement to loosen scale from recessed cavities. This results inlonger cleaner life,less disposal cost and better adhesion. . Filter your cleaners Filter Remove oils Soak cleaner tank Rinse . or Automatic Gravity Filter Heavy sediment is removed by coarse cartridge filter or automatic gravity filter. Overflow from weir or bulkhead fitting Skimmer Oil discharge Oil is most effectively removed off line by feeding overflowweirto unheated side tank. Cooled cleaner isskimmed, prefilteredand coalesced. (NOTE: Pump can be in-tank or out-of-tank.) Cooling tank for oil removal . Filter the last rinse with carbon prior to finishing Soak cleanertank Skimmer The final rinse before painting, coating, galvanizing, anodizing or plating, whether after electroclean or acid dip, is your last chance to remove oil and particles before they reach the process tank. (NOTE: Pump can be in-tank or out-of-tank.) Filter chamber Final rinse before plating ~ ~~IT1~DI1~ID@~~1rID~ 1777Shermer Road 847-559-1777 Norlhbrook, IL60062-5360 U.S.A. 800-323-5431 Email:[email protected] FAX:847-559-1995 Web:hllp:/ /www.serfilco.com ~ SYSTEMS AND teJlj TECHNOLOGY Co. 6! Iran Street, Dokki, Cairo, Egypt Tel: 202-761-4150. 335-3664 Fax: 202-337-0597 Web: www.sat-eng.com email [email protected]

Upload: dominh

Post on 26-Mar-2018

216 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: SER-DUCTOR air-less agitation combines pumps . … BULLETIN TF-144A JULY 1999 Pretreatment cleanliness assures good finishes on your parts. ... Overflow from weir or bulkhead fitting

FOUR EASY STEPS TOBETTER CLEANING

TECHNICALBULLETINTF-144AJULY 1999

Pretreatment cleanliness assures good finishes on your parts.Keep them clean and oil-free. . . easily and economically

with SERFILCOengineered filtration, coalescing and carbon systems.

Use SER-DUCTOR@systems for uniform agitation.SER-DUCTOR air-less agitation combines pumpsand eductors to increase solution circulation for betterimpingement to loosen scale from recessed cavities.This results inlonger cleaner life,less disposal cost andbetter adhesion.

. Filter your cleaners

Filter

Remove oils

Soak cleaner tank Rinse

. orAutomatic

GravityFilter

Heavy sediment is removed by coarsecartridge filter or automatic gravity filter.

Overflow from weir

or bulkhead fitting

SkimmerOil

discharge

Oil is most effectively re-moved off line by feedingoverflowweirto unheatedside tank. Cooled cleanerisskimmed,prefilteredandcoalesced.(NOTE: Pump can bein-tankor out-of-tank.)

Coolingtank for

oil removal. Filter the last rinse with carbon prior to finishing

Soakcleanertank

Skimmer

The final rinse before painting, coating,galvanizing, anodizing or plating, whetherafter electroclean or acid dip, is your last chanceto remove oil and particles before they reach theprocess tank.

(NOTE: Pump can be in-tank or out-of-tank.)Filter

chamberFinal rinse before plating

~~IT1~DI1~ID@~~1rID~1777ShermerRoad 847-559-1777Norlhbrook,IL60062-5360 U.S.A.800-323-5431Email:[email protected] FAX:847-559-1995

Web:hllp://www.serfilco.com

~ SYSTEMS ANDteJlj TECHNOLOGY Co.6! Iran Street, Dokki, Cairo, EgyptTel: 202-761-4150. 335-3664Fax: 202-337-0597Web: www.sat-eng.comemail [email protected]