series 471 apartment sliding door - open windows & … 471 apartment sliding door ... suit...

Ser ies 471

Apar tment S l id ing Door

DATE: MAY 2013 | REPLACES: MARCH 2008

Photography: Alan Rogers. Project: Crown Plaza Heindmarsh Square. Windows by TC Aluminium

CO

MM

ER

CIA

L S

ER

IES

2D & 3D CAD Files AvAilAble To access 2D & 3D CAD models visit our online specifier resource centre www.specifyaws.com.au

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471

APARTMENT SLIDING DOOR

MORe iNFORMATiON For the latest updates regarding this product visit our website www.elevatealuminium.com.au

KeY FeATURes/PeRFORMANCe CHARACTeRisTiCs

Maximum Panel Height* 2700mm

Maximum Panel Width* 1500mm

Maximum Glass Thickness ≤20mm

• High performance architectural sliding door system designed for high rise apartments.

• The 101.60mm frame is compatible with CentreGLAZE™ and FrontGLAZE™ framing and can be coupled together in runs of framing and doors.

• The door is ideal for projects that require very high water resistance when the door panels are not excessively big.

• As the moving sash is on the outside, we achieve very high water resistance – 600Pa. Also complies with the air conditioning requirements of the Australian Standard.

• There are a large variety of door combinations possible (XF, FX, FXF, XFF, FFX and FXXF).

• We can fit sliding flydoors on the inside.

• Doors can be fitted with surface or mortice deadlocks.

• Sashes run on custom lowline heavy duty double bogey wheel carriages.

• Tall bottom rail designed for added strength and makes the doors proportionally correct.

• Unwanted head recess is fitted with snap-in flat closer.

• Matching Series 461 sliding window available.

• Standard slimline ANDO surface mounted door lock illustrated

below.

Series 471 Apartment Sliding DoorInternal view.

* Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, Email [email protected]

DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


2.455

WeRs RATiNGs

HOW TO sPeCiFY

Specification Assistance

Need help specifying this product? Email [email protected] and our qualified technical advisors will assist you with product selection and specification for your project.

sYsTeM NAMe

Elevate Aluminium Systems Series 471

Apartment Sliding Door

FiNisH

Powder Coat

Anodised

COlOUR

Select from the AWS range of approved

powder coat or anodising colours

GlAss

Specify thickness ≤ 20mm

Specify thermal performance where

applicable (Uv & SHGC)

Specify acoustic performance where

applicable (RW)


single Glazed Window iD Glass Type Uw sHGCw Tvw infAWS-045-01 4SnClr 4.6 0.49 0.54 1.37

AWS-045-02 6SnClr 4.6 0.48 0.54 1.37

AWS-045-03 6EVanBG 4.4 0.37 0.45 1.37

AWS-045-04 6EVanClr 4.4 0.5 0.53 1.37

AWS-045-05 6EVanGy 4.4 0.33 0.25 1.37

AWS-045-06 6EVanSpB 4.4 0.29 0.31 1.37

AWS-045-07 6EVanSpGn 4.4 0.29 0.38 1.37

AWS-045-08 6.38VLam 5.9 0.65 0.71 1.37

AWS-045-09 6.38VLamGy 5.9 0.29 0.1 1.37

AWS-045-10 6.38TLam 5.9 0.33 0.26 1.37

AWS-045-11 6.38SnClr 4.5 0.47 0.53 1.37

AWS-045-12 6.38SnGy 4.5 0.35 0.25 1.37

AWS-045-13 6.38Sct 4.2 0.55 0.64 1.37

AWS-045-14 6.38CPNtrl 4.2 0.41 0.47 1.37

AWS-045-15 6.38CPClr 4.2 0.55 0.65 1.37

AWS-045-16 6.38CPGn 4.2 0.41 0.56 1.37

AWS-045-17 6.38CPGy 4.2 0.4 0.31 1.37

AWS-045-18 10.38ClrLam 6 0.49 0.5 1.37

AWS-045-19 10.38SnClr 4.8 0.43 0.49 1.37

AWS-045-20 10.38GyLam 6 0.21 0.08 1.37

AWS-045-21 10.38TLam 4.5 0.39 0.45 1.37

AWS-045-22 10SnClr 4.4 0.39 0.45 1.37

NOTes1. Uw is the whole window U-value2. SHGCw is the whole window solar heat gain coefficient3. Tvw is the whole window visible (light) transmit-tance4. Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 20475. Static performance (Uw SHGCw Tvw Tdw) calculated using Window 6.3 and Therm 6.3 software (LBNL), 1999-20106. Results disclosed at Australian Fenestration Rating Council (AFRC) regulations.7. Ratings for use with Section J of the Building Code of Australia - Class 2-9

For the latest WeRs data for this system visit www.wers.net

sOUND ReDUCTiON

A number of glass combinations have been tested with this system to acheive sound reduction numbers listed below.

Glass Description Rating

6.5mm VLam Hush glass Rw32

10.5mm VLam Hush Rw33

WeRs RATiNGs


CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


NOTes1. Uw is the whole window U-value2. SHGCw is the whole window solar heat gain coefficient3. Tvw is the whole window visible (light) transmittance4. Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 20475. Static performance (Uw SHGCw Tvw Tdw) calculated using Window 6.3 and Therm 6.3 software (LBNL), 1999-20106. Results disclosed at Australian Fenestration Rating Council (AFRC) regula-tions.7. Ratings for use with Section J of the Building Code of Australia - Class 2-9

For the latest WeRs data for this system visit www.wers.net

Double Glazed Window iD Glass Type Uw sHGCw Tvw infAWS-045-23 3/12Ar/3ET 3.4 0.55 0.56 1.37

AWS-045-24 3SG/12/3 4.1 0.4 0.51 1.37

AWS-045-25 4Az/10/4ET 3.6 0.32 0.46 1.37

AWS-045-26 4/10/2004 4.1 0.57 0.6 1.37

AWS-045-27 4/10/4ET 3.6 0.53 0.55 1.37

AWS-045-28 4/10Ar/4ET 3.4 0.54 0.55 1.37

AWS-045-29 4SnClr/10/4 3.8 0.41 0.46 1.37

AWS-045-30 4SnClr/10Ar/4 3.6 0.41 0.46 1.37

AWS-045-31 5/08/2005 4.2 0.56 0.59 1.37

AWS-045-32 5SG/8Ar/5ET 3.5 0.32 0.45 1.37

AWS-045-33 6.38CPClr/8/4 3.7 0.47 0.55 1.37

AWS-045-34 6.38CPClr/8Ar/4 3.5 0.47 0.55 1.37

AWS-045-35 6.38CPGy/8/4 3.7 0.34 0.26 1.37

AWS-045-36 6.38CPGy/8Ar/4 3.5 0.33 0.26 1.37

AWS-045-37 6SnClr/10/6 3.7 0.4 0.45 1.37

AWS-045-38 6SnClr/10Ar/6 3.5 0.4 0.45 1.37

AWS-045-39 6.38SnClr/12/6 3.7 0.4 0.45 1.37

AWS-045-40 6.38SnClr/12Ar/6 3.5 0.4 0.45 1.37

AWS-045-41 10SnClr/6/6 4 0.39 0.44 1.37

AWS-045-42 10SnClr/6Ar/6 3.8 0.38 0.44 1.37

AWS-045-43 10.38SnClr/8/6 3.8 0.38 0.44 1.37

AWS-045-44 10.38SnClr/8Ar/6 3.6 0.38 0.44 1.37

DesiGN FeATURes


CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


2.457

High performance architectural sliding door system designed for high rise apartments.

The 101.60mm frame is compatible with CentreGLAZE™ and FrontGLAZE™ framing and can be coupled together in runs of framing and doors.

The door is ideal for projects that require very high water resistance when the door panels are not excessively big.

As the moving sash is on the outside we get very high water resistance - 600Pa. Also complies with the air-conditioning requirements of the Australian Standard.

There are a large variety of door combinations possible (XF, FX, FXF, XFF, FFX and FXXF).

We can fit sliding flydoors on the inside. Maximum recommended screen door size 2400mm by 1200mm wide. But be aware there are glass door locking limitations when fitting flydoors - Some handles/locks can get too close to the screen door frame.

These screen doors can be fitted with a variety of infills including stainless steel mesh.

The head and jamb framing sections have integrated nailing fins to suit cavity brick and brick veneer installations. The 30mm nailing fin jamb is standard, we also offer an alternative 44mm nailing fin jamb for those that want the extra bold frame all round.

Doors can be fitted with surface or mortice deadlocks. But as mentioned above be careful when screen doors are on the inside as some lock handles clash with the screen door frame.

Sashes run on custom lowline heavy duty double bogey wheel carriages.

Tall bottom rail designed for added strength and make the doors proportionally correct.

The top and bottom rails on wide panels are reinforced, the concealed rail stiffener wraps around the sill running rail for added security and is morticed into the stiles at head.

Unwanted head recess is fitted with snap-in flat closer to ensure that the clean looks are maintained.

Doors can be fitted with highlights if required with run through jambs. These highlights can be fixed lights or awning sashes.

Panels will accept a variety of glass thicknesses from 4mm to 20mm insulating glass units. Dedicated sash rail and stiles for 8.38mm, 10.38mm and 10.50mm laminated and 16mm IGU's.

Sub-sill as illustrated right is standard.

Matching Series 461 sliding window available.

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


series 471 can be fabricated as ‘XF’, ‘FX’, ‘FXF’, ‘XFF’, ‘FFX’ and ‘FXXF’ with or without highlights.

strength Note:On Sliding Doors with transoms the transom strength could be the weak link, refer local AWS sales office for transom strength details.

sub-sills are always recommended under Series 471 doors and on the higher water ratings we tip water down into the sub-sill. The illustration below shows standard sub-sill.

Internal view with optional flydoor

TYPiCAl CONFiGURATiONs


To secure the sash in the frame the bottom rail wraps over the frame running rail. On wider sashes or high wind load areas the rails are fitted with rail stiffener as shown left.

Optional Flydoors - We offer a variety of flydoor frames that can be used in this sliding door.

Two mitred frames covering plain mesh and expanded aluminium inserts.

alternative

We offer a custom square cut screen door system that matches the main glass door in assembly and sightline. This square cut frame will accept any flyscreen insert including stainless steel mesh.

Other screen door features:

• Integrated snap-on interlock that picks up the built-in interlock on the door meeting stile.

• Spring loaded wheel in all four corners with running rail on head and sill to ensure smooth flydoor operation and a door that stays on the track.

• Skirted top and bottom rails cover rollers.

• Weatherpile insert in frame (head) to slow the screen doors down.

• The right lock or latch for the project. Flydoor latches come with stainless steel ‘Z’ keepers as standard. The security barrier lock has multipoint tongues into stainless steel keeper for added security.

screen Door limitations:• We don’t recommend screen doors over 2400mm

high x 1200mm wide.

• As the screen doors are close to the main glass doors there are limitations on the type of glass door locks - ANDO™ slimline recommended for doors with screen doors.

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


2.459

Rating tables for door meeting stiles on this page.s = Serviceability limit state (deflection = L/180 or deflection L/250).U = Ultimate strength limit state (factored yield strength = 104 MPa).

These tables have been calculated using nominal section properties.A typical assembly has been tested as per the requirements of AS2047,

The examples shown on this page are based on rail with stiffener included as panels are over 900mm wide.

On ‘FXXF’ doors the centre meeting stile may be the limiting factor, this is why heavy and extra heavy meeting stile rate the same.

type ‘XF’ and ‘FX’Maximum recommended sizes 2400 x 3000mm & 2700 x 2400mm.

Height Width Meeting stile Typemm mm light Medium Heavy eX Heavy2100 2400 L/180 s - 806 1563 17822100 2400 L/250 s - - 1361 17522100 2400 U - 1208 2345 2673

2400 2400 L/180 s - - 1155 13172400 2400 L/250 s - - 873 11242400 2400 U - - 1733 1975

type ‘FXF’, ‘XFF’ and ‘FFX’Maximum recommended sizes 2400 x 4500mm & 2700 x 3600mm.


2400 3600 L/180 s - - 1155 13172400 3600 L/250 s - - 873 11242400 3600 U - - 1733 1975

type ‘FXXF’Maximum recommended sizes 2400 x 6000mm & 2700 x 4800mm.


2400 4800 L/180 s - - 1185 11852400 4800 L/250 s - - 853 8532400 4800 U - - 1780 1780

Wide Door Panels: The limiting factor on wide panels may be the strength of the bottom rails.

Series 471 can be configured in a variety of single track configurations as shown below.

Not available in stacking options, refer Series 702 or 704 for these types of doors.

For higher, wider and stronger doors go to Series 702 or 704.

PANel sTReNGTH


CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


Head

We have a dedicated head section to allow the installation of sliding door sashes into framing.

Built-in nailing fin on head, jambs and sub-sill make this window significantly more water proof and easier to install into brick veneer and cavity brick walls.

The weather bar on the head is used to seal transom details.

Weatherpile seals.

Unwanted recess closed off.

We reinforce the top rail on wide door panels or doors in high wind load areas.

Meeting stile closer block seals the gap left after machining back the stile interlocks.

Optional screen door shown dotted.

sill

We have a dedicated sill section designed to accept external sliding door panels.

Standard tall bottom rail.

Splayed aluminium threshold guides moisture back to the outside.

Double bogey heavy duty roller carriage used on all Series 471 doors.

Wide sashes fitted with top and bottom rail stiffeners.

Heavy duty running rail.

CAD file: DWG 471.slD.1

HeAD & sill DeTAils

DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


2.461

Jamb

Custom jamb adaptor snaps into nailing fin jamb.

The detail left shows the standard 30mm narrow jamb. We also have a 44mm wide nailing fin jamb.

Door can be fitted with surface mounted or mortice type locks. You can view the lock options in colour on our web site

CAD file: DWG471.slD.1

Standard 30mm nailing fin jamb

This wheel assembly has been designed specifically for Series 461 sliding windows and Series 471 sliding doors.

The wheel comes standard with double lowline rollers fitted with high precision 'ZZ' bearings.

We always recommend sub-sills under Series 471 sliding doors.

JAMb DeTAil

DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


HORiZONTAl seCTiON THROUGH 'XF' DOOR

The jamb filler is designed to give us another reveal fixing line. This allows us to pull the reveals up tight against the frame.

Stainless steel screw assembly.

The nailing fin frame is ideal for brick veneer and cavity brick wall installation.

External recess in frame can be closed off with optional jamb filler if required.

Alternative 44mm wide jamb.

ANDO™ slimline lock illustrated.

Heavy duty lock stile designed to accept mortice type locks. The finger grips on the lock stile is designed to stiffen up the stile when in the open position. On doors over 2400mm high we fit the finger grips both sides of stile as shown dotted.

Double weatherpile seals at meeting stiles.

We offer several meeting stile combinations with the heavier stile (with projection) on the outside. When screens are not fitted we can fit heavy meeting stiles both sides to achieve even higher strength numbers.

Wrap around PVC glazing channel wedge.

The opening panel is located on the outside to achieve very high water resistance.

Anti-jump splayed buffer designed to keep the panel on the running rail when it's pushed into the fully open position.

Standard 30mm nailing fin jamb


DATE: MAY 13REPLACES: JUNE 06SCALE: HALF FULL SIZE

Height adjustable galvanised building-in lugs available for cavity brick installations

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


2.463

An important feature with Elevate™ Commercial windows and doors is the way we treat transoms.

We assume that water will get into the transom assembly.

To deal with this water we seal the transom to the jambs with custom pocket closer and small joint caulking.

We drill drainage holes in the pocketed transom filler.

There is a weather bar in the lower section.

Concealed drainage holes to guide water out of the assembly.

Clean transom assembly

TRANsOM WeATHeRPROOFiNG



CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


The main structural external meeting stile is fitted with snap-in closer trim.

The internal meeting stile can change depending whether you are fitting screen doors.

The illustration above shows light meeting stile on the inside designed to accept the flydoor interlock

We don’t recommend flydoors on frames greater than 2400mm high.

If you are not fitting screen doors or the frames are over 2400mm high fit the plain meeting stile without screen interlock or medium strength meeting stile on the inside to stiffen up the fixed interlock stile, as shown dotted.

MeeTiNG sTile OPTiONs



CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


2.465

We offer a variety of door locks that suit Series 471 sliding doors.

ANDO™ Slimline lock shown right is a versatile option when internal flydoors are fitted and the frame height is less than or equal to 2400mm. An alternative is the ANDO™ Surface mounted sliding door lock with 'D' pull shown far right.

ANDO™ locks are available in a large range of colours to match the door panel colour.

The ANDO™ lock comes standard with 316 stainless steel twin tongues.

Non handed.

C4 pin cylinder can be keyed to match other AWS locks including hinged doors.

The ICON™ Stainless Steel surface mounted lock can also be fitted to the Series 471 sliding door.

The ICON™ lock comes standard with 316 stainless steel twin tongues.

Non handed.

C4 pin cylinder can be keyed to match other AWS locks including hinged doors.

All ANDO™ locks come standard with powder coated stainless steel external pull handles.shown right

lOCK OPTiONs


There are two external pull handles available to suit ICON surface mounted locks.

UPDATEWITH471

CO

MM

ER

CIA

L S

ER

IES

© A

rchi

tect

ural

Win

dow

Sys

tem

s Pt

y Lt

d 1

996-

2013

Ser ies 471


Besides significantly increasing the strength of the bottom rail the stiffener nests over the running rail.

This page highlights how we treat the most important factor on external sliding doors.

The weak link on sliding doors can be the horizontal rail particularly on wide panels or doors in high wind load areas. In these situations we fit custom horizontal rail stiffeners.

All Series 471 doors have tall bottom rails.

To allow the bottom rail to overlap the running rail we have designed a double wheel assembly with lowline wheels that have high precision 'ZZ' bearings.

The stiffened meeting stile is fitted with snap-in aluminium closer.

The bottom rail is double screwed to stiles, this prevents rail twist under high ultimate wind loads.

When the stiffener is fitted to top rail the stiffener is morticed into the stile as detailed below.

ReiNFORCeD bOTTOM RAil


series 471 apartment sliding door - open windows & … 471 apartment sliding door ... suit...

Documents