series 812/815 - 800/802/805 - 8157 - 515 - saehan · pdf filestraight running steel chains...

Straight running steel chains

Series 812/815 - 800/802/805 - 8157 - 515

CHAIN - REF. CODE MaterialFinish Width L G RD Weight

µm mm inch. mm mm Kg/m

1030110302103031030410305103061030710001100071003410002100031000410005100061004710048100331000910030100321001010011100121001310014100271002610049100281003610037100381003910016100351001710018100191002010021

20

812815

STRAIGHT RUNNING CHAINS SINGLE HINGE

Breaking Load according to Standard ISO 4348 - DIN 8153

S 815 K300S 815 K325S 815 K350S 815 K400S 815 K450S 815 K600S 815 K750

SS 812 K325SSR 812 K325

SS 812 K330SS 812 K350SS 812 K400SS 812 K450SS 812 K600SS 812 K750

SSS 812 K325SSSR 812 K325

SSE 815 K300SSE 815 K325

SSER 815 K325SSE 815 K330SSE 815 K350SSE 815 K400SSE 815 K450SSE 815 K600SSE 815 K750SSS 815 K325

SSSR 815 K325SSS 815 K330SSS 815 K350SSE 815 K325 HBSSE 815 K330 HBSSS 815 K325 HBSSS 815 K330 HBSSA 815 K325SSA 815 K330SSA 815 K350SSA 815 K400SSA 815 K450SSA 815 K600SSA 815 K750

C 45

STANDARD

EXTRA PLUS

EXTRA PLUS- HB -

AUSTIC

12000

5400

8500

8500

5300

Not applicable

0.6

0.3

0.3

0.3

76.282.588.9

101.6114.3152.4190.582.582.583.888.9

101.6114.3152.4190.582.582.576.282.582.583.888.9

101.6114.3152.4190.582.582.583.888.982.583.882.583.882.583.888.9

101.6114.3152.4190.5

33.1/4

3.1/2

44.1/2

67.1/2

3.1/4

3.1/4

3.19/64

3.1/2

44.1/2

67.1/2

3.1/4

3.1/4

33.1/4

3.1/4

3.19/64

3.1/2

44.1/2

67.1/2

3.1/4

3.1/4

3.19/64

3.1/2

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64

3.1/2

44.1/2

67.1/2

1.8

1.82.8

1.8

2.8

1.8

2.8

1.8

1.82.81.81.8

1.8

1.8

150

15075

150

15075

150

75

150

15075

150150

150

150

2.52.62.73.03.34.25.12.62.52.62.73.03.34.25.12.62.52.52.62.52.62.73.03.34.25.12.62.52.62.72.52.62.52.62.62.62.73.03.34.25.1

STRAIGHT RUNNING CHAINSSINGLE HINGE Series 812 - 815

Standard length:80 pitches (10 ft. - 3.048 m).

Advantages:• High wear resistance• Exceptional durability• Optimum performance• Extremely low noise level• Excellent surface finish• SSS Superfinish (0.2µm)• SSE Finish (0.3µm)

Ø 6.3538.138.1

6.6

RD

9.8

3.1

42.1

44 G

�

TRAVEL

Austenitic Stainless SteelAUSTIC

Special Pin MaterialHB

Extra Plus Stainless Steel

Ferritic Stainless Steel

Through HardenedCarbon SteelC 45

STANDARD

EXTRAPLUS

0.2

SUPER FINISH

0.2

SUPER FINISH

0.2

SUPER FINISH

YieldPoint

N



1008010081100901009110085100861009510096

21

SPEED - LINE STRAIGHT RUNNING CHAINS

815


SPC 815 K325

SPC 815 K330

SPC 815 K325 HB

SPC 815 K330 HB

SPS 815 K325

SPS 815 K330

SPS 815 K325 HB

SPS 815 K330 HB

EXTRA PLUS

- HB -

EXTRA PLUS

- HB -

8500

0.3

82.5

83.8

82.5

83.8

82.5

83.8

82.5

83.8

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64

1.5 150

2.5

2.6

2.5

2.6

2.5

2.6

2.5

2.6

SPEED-LINESTRAIGHT RUNNING CHAINS Series 815


Advantages:• Optimised chain plates

and hinges• Minimised gap of 1.5 mm• Maximised product support• Best product transfer along

as well as across therunning direction

• High speeds• Optimum performance• Excellent surface finish• SPS Superfinish (0.2µm)• SPC Finish (0.3µm)

The best solution for pressureless combiners and high-speed applications

On request these chains can be produced with special material.

G = 1.5

Ø 6.3538.138.1

6.6

RD

9.8

3.1

42.1

44

�

TRAVEL

For chains material see page 16 - 17

For sprockets type see pages 244 ➙ 252


EXTRAPLUS

0.2

SUPER FINISH

For chemicalresistance seepages 338 - 339


YieldPoint

N

10050

10060

10051

10061

10052

10062

10055

10053






22

800802805

STRAIGHT RUNNING CHAINS DOUBLE HINGE

STRAIGHT RUNNING CHAINSDOUBLE HINGESeries 800 - 802 - 805


38.1 38.1 Ø 6.35

6.6

RD

9.83.

1

80.5

82.5

�

G

TRAVEL

Advantages:• High working load• Exceptional durability• Excellent surface finish• Consistent high quality• Heavy duty applications

S 800 K750

SR 800 K750

SS 802 K750

SSR 802 K750

SSE 805 K750

SSER 805 K750

SSE 805 K750

SSA 805 K750

C 45

STANDARD

EXTRA PLUSHB

AUSTIC

28000

10300

15000

1500

9600

Not applicable

0.6

0.3

0.3

0.3

190.5 7.1/2

1.8

2.8

1.8

2.8

1.8

2.8

1.8

1.8

150

75

150

75

150

75

150

150

5.8

5.7

5.8

5.7

5.8

5.7

5.8

5.8



Ferritic Stainless Steel


STANDARD

EXTRAPLUS


YieldPoint

N





23

8157 STRAIGHT RUNNING CHAINSHEAVY DUTY SINGLE HINGE


EXTRAPLUS

Versions:

STAINLESS STEEL CHAINS:

Straight running chain 8157

Sideflexing chain for magnetic system 8857 M

Straight running chain with rubber pad 8157 VG

Sideflexing chain with rubber pad for magnetic system 8857 M VG

PLASTIC CHAINS:



Straight running chain with accumulation rollers LBP 8257

Sideflexing chain with accumulation roller for magnetic system LBP 882 M



NEWS SERIES!

This chain is part of the new series of stainless steeland plastic chains having a hinge - width of 57 mm.

STRAIGHT RUNNING CHAINS HEAVY DUTY SINGLE HINGESeries 8157

NoteSingle hinge - width of 57 mm.


Advantages:There are several advantages by using, the new type ofchains (stainless steel and plastic).As a matter of fact there are chains for straight runningand sideflexing (magnetic system) applications, as wellas chains for product accumulation (LBP series) andfor inclined sections (chains with rubber pad), but thestructure of the conveyors does not change (upper spacers) as the standard width of the hinge enables theuse of the same guides for the same chain width.

38.1 38.1Ø 6.35

6.6

RD

9.8

3.1

57

59G

�

TRAVEL

CHAIN - REF. CODE MaterialYield Finish Width L G RD WeightPoint

µm mm inch. mm mm Kg/mN

SSE 8157 K750

SSE 8157 K750

10054

10059

EXTRA PLUSHB

10400 0.3 190.5 7.1/2 1.8 150 5.60

series





For chains material see pages 16 - 17



24

515 STRAIGHT RUNNING CHAINS SINGLE HINGE - Pitch 25.4 mm (1”)

ExtraStainless SteelEXTRA

STRAIGHT RUNNING CHAINS SINGLE HINGE Pitch 25.4 mm (1”)Series 515


Ø 6.35

6.6

RD

9.8

25.4 25.4

3.1

42.1

44

�

G

TRAVEL

Advantages:• High wear resistance• Exceptional durability• Optimum performance• Excellent surface finish• These chains also feature fully

coined edges and extremely flat conveying surfaces

10040

10041

10042

10043

10044

10045

10046

SSE 515 K217

SSE 515 K236

SSE 515 K250

SSE 515 K283

SSE 515 K325

SSE 515 K350

SSE 515 K400

EXTRA 5200 0.3

55.0

60.0

63.5

72.0

82.5

88.9

101.6

2.11/64

2.27/64

2.1/2

2.27/32

3.1/4

3.1/2

4

1.6 100

2.3

2.4

2.5

2.7

2.9

3.0

3.3


YieldPoint

N

Sideflexing steel chains

Series 881 - 881O - 881 TAB - 881O TAB - 881M - 8857M - 1874

CHAIN - REF. CODE MaterialFinish Width L R SC Weight

µm mm inch. min. Straight Curving Kg/m

3.1/4

4.1/2

7.1/2

3.1/4

4.1/2

7.1/2

500

4850

4500


26

881 SIDEFLEXING CHAINS

SIDEFLEXING CHAINSSeries 881


CHAINS WITH BEVELLED GUIDESHOES

Advantages:The sideflexing chains have thesame characteristics as the straightrunning chains which are:• High wear resistance• Exceptional durability• Optimum performance• High hardness• High tensile strenght

38.1 38.1 Ø 6.35

6.6

9.8

3.1 SC

43

8°

11.2

�

R.

TRAVEL

RD=80

Extra Stainless SteelEXTRA



For straighttracks seepages 233 - 237

For corner trackssee pages 218 - 219 - 226

10101

10102

10103

10107

10108

10109

SSE 881 K325

SSE 881 K450

SSE 881 K750

SSA 881 K325

SSA 881 K450

SSA 881 K750

EXTRA

AUSTIC

0.3

82.5

114.3

190.5

82.5

114.3

190.5

44.5 41.3

3.00

3.70

5.50

3.00

3.70

5.50



YieldPoint

N

“NOLU-S” CURVES

ARE STRONGLY RECOMMENDED

WITH THESE CHAINS!

7000

0.3

500 44.5 41.3

3.00

3.20

3.70

5.50

3.00

3.20

3.1/4

3.1/2

4.1/2

7.1/2

3.1/4

3.1/2

EXTRA PLUS



SSE 881O K325

SSE 881O K350

SSE 881O K450

SSE 881O K750

SSS 881O K325

SSS 881O K350

10400

10406

10401

10402

10407

10408

82.5

88.9

114.3

190.5

82.5

88.9






27

881O SIDEFLEXING CHAINS

SIDEFLEXING CHAINSSeries 881O


38.1 38.1 Ø 6.35

6.6

9.8

3.1 SC

43

8°

11.2

�

R.

TRAVEL

RD=80

CHAINS WITH BEVELLED GUIDESHOES

This sideflexing chains series 881O offers a further improvementto the standard chains series 881.This chain has a smaller gapbetween the plates and therforecreates a larger surface area for con-veying purposes.

0.2

SUPER FINISH



EXTRAPLUS

On request and for adequate quantities these chains can be produced in:


YieldPoint

N

“NOLU-S” CURVES


WITH THESE CHAINS!








28

881 TAB SIDEFLEXING CHAINS

SIDEFLEXING CHAINSSeries 881 TAB


38.1 38.1 Ø 6.35

6.6

�

R.19

.43.1 SC

4312.7

56.2

TRAVEL

RD=80

10104

10105

10106

10110

10111

10112

SSE 881 TAB K325

SSE 881 TAB K450

SSE 881 TAB K750

SSA 881 TAB K325

SSA 881 TAB K450

SSA 881 TAB K750

EXTRA

AUSTIC

4850

4500

0.3

82.5

114.3

190.5

82.5

114.3

190.5

3.1/4

4.1/2

7.1/2

3.1/4

4.1/2

7.1/2

46500 45

3.00

3.70

5.50

3.00

3.70

5.50

CHAINS WITH HOLD-DOWN TABS

Advantages:• High wear resistance• Exceptional durability• High hardness• High tensile strenght• Considerably increased stability• Self-clean effect

(the tabs produce)

Extra Stainless SteelEXTRA



YieldPoint

N

“NOLU-S” CURVES


WITH THESE CHAINS!








29

881O TAB SIDEFLEXING CHAINS

SIDEFLEXING CHAINSSeries 881O TAB


38.1 38.1 Ø 6.35

6.6

19.4

3.1 SC

4312.7

56.2

�

R.

TRAVEL

RD=80

Advantages:• High wear resistance• Exceptional durability• High hardness• High tensile strenght• Considerable increased

stability

CHAINS WITH HOLD-DOWN TABS

This sideflexing chains series 881O TAB offers a furtherimprovement to the standard chains series 881 TAB.This chain has a smaller gap betweenthe plates and therfore creates a lar-ger surface area for conveying pur-poses.

10403

10420

10404

10405

SSE 881O TAB K325

SSE 881O TAB K350

SSE 881O TAB K450

SSE 881O TAB K750

EXTRA PLUS 7000 0.3

82.5

88.9

114.3

190.5

3.1/4

3.1/2

4.1/2

7.1/2

46500 45

3.00

3.20

3.70

5.50



EXTRAPLUS



YieldPoint

N

“NOLU-S” CURVES


WITH THESE CHAINS!

82.5

83.8

114.3

190.5

82.5

83.8

114.3

190.5

82.5

83.8

82.5

83.8

82.5

83.8

3.1/4

3.19/64

4.1/2

7.1/2

3.1/4

3.19/64

4.1/2

7.1/2

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64

500 45 44



30


881 M881 MO

SIDEFLEXING CHAINS FORMAGNETIC SYSTEM

SIDEFLEXING CHAINS FOR MAGNETIC SYSTEMSeries 881 M - 881 MO

Note:Pin in Ferritic Stainless Steel.


Advantages:• High tensile strenght• High wear resistance• Excellent surface finish• Smaller gap • High speeds

Characteristics:• The chains series 881 M and 8857 M are securely

retained in the curve by magnets located under thehinge of chain in the upper part of curve.As there are no tab or bevel shoes on these chainsthey can be easily removed from the curve for the purpose of maintenance or cleaning, without dismantling the chain.

• Series 881 MO (Magnet Optimal) is a further development of the traditional series 881 M.By retaining more material in the plate configurationa reduced gap between each link can be realisedallowing improved product transfer and stability.

Note: In order to achieve this advantage the minimumradius of the chain has been increased from 457 mmto 500 mm.

38.1 38.1 Ø 6.35

6.6

9.8

TRAVEL

�

R.

3.1

42.1

SC RD=80

13.5

27

10208

10209

10211

10212

10206

10207

10201

10203

10202

10205

10213

10214

10215

10216

SS 881 MO K325

SS 881 MO K330

SS 881 M K450

SS 881 M K750

SSE 881 MO K325

SSE 881 MO K330

SSE 881 M K450

SSE 881 M K750

SSS 881 MO K325

SSS 881 MO K330

SSE 881 MO K325 HB

SSE 881 MO K330 HB

SSS 881 MO K325 HB

SSS 881 MO K330 HB

STANDARD

EXTRA PLUS

EXTRAPLUS- HB -

5400

8500

8500

0.6

0.3

0.3

2.60

2.65

3.10

4.90

2.60

2.65

3.10

4.90

2.60

2.65

2.60

2.65

2.60

2.65

Special PinMaterial

Ferritic Stainless SteelSTANDARD

HB


EXTRAPLUS



For magnetic corner tracks seepages 131 ➙ 156

0.2

SUPER FINISH

0.2

SUPER FINISH




YieldPoint

N

82.5

83.8

82.5

83.8

82.5

83.8

82.5

83.8

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64

500 45 44

2.60

2.65

2.60

2.65

2.60

2.65

2.60

2.65



31

881 MO SPEED LINE SIDEFLEXING CHAINSFOR MAGNETIC SYSTEM

SPEED LINE SIDEFLEXING CHAINS FOR MAGNETIC SYSTEMSeries 881MO

Note:Pin in Ferritic Stainless Steel.


Characteristics:• The chains series 881 M and 8857 M are securely

retained in the curve by magnets located under thehinge of chain in the upper part of curve.As there are no tab or bevel shoes on these chainsthey can be easily removed from the curve for the purpose of maintenance or cleaning, without dismantling the chain.

• Series 881 MO (Magnet Optimal) is a further development of the traditional series 881 M.By retaining more material in the plate configurationa reduced gap between each link can be realisedallowing improved product transfer and stability.

Note: In order to achieve this advantage the minimumradius of the chain has been increased from 457 mmto 500 mm.

38.1 38.1 Ø 6.35

6.6

9.8

TRAVEL

�

R.

3.1

42.1

SC RD=80

13.5

27

Special PinMaterialHB


EXTRAPLUS




1025010251102601026110255102561026510266

SPC 881 MO K325

SPC 881 MO K330

SPC 881 MO K325 HB

SPC 881 MO K330 HB

SPS 881 MO K325

SPS 881 MO K330

SPS 881 MO K325 HB

SPS 881 MO K330 HB

EXTRA PLUS

- HB -

EXTRA PLUS

- HB -

8500

0.3

0.2

SUPER FINISH



The best solution for pressureless combiners andhigh-speed applications

Advantages:• Optimised chain plates

and hinges• Minimised gap of 1.5 mm• Maximised product support• Best product transfer along

as well as across therunning direction

• High speeds• Optimum performance• Excellent surface finish• SPS Superfinish (0.2µm)• SPC Finish (0.3µm)

YieldPoint

N

32

8857 M SIDEFLEXING CHAINS FOR MAGNETICSYSTEM - HEAVY DUTY


CHAIN - REF. CODE MaterialFinish Width L R SC

Weightµm mm inch. min. Straight Curving Kg/m





SIDEFLEXING CHAIN FORMAGNETIC SYSTEMSeries 8857 M


38.138.1 Ø 6.35

6.6

9.8

�

R.TRAVEL

57

SC RD=150

3.1

1732

SSE 8857 M K750

SSE 8857 M K750 HB

10204

10218

EXTRA PLUS

HB10400 0.3 190.5 7.1/2 61750 60 5.30

Advantages:There are several advantages by using, the new type ofchains (stainless steel and plastic).As a matter of fact there are chains for straight runningand sideflexing (magnetic system) applications, as wellas chains for product accumulation (LBP series) and forinclined sections (chains with rubber pad), but thestructure of the conveyors does not change (upperspacers) as the standard width of 57 mm the hingeenables the use of the same guides for the same chainwidth.


EXTRAPLUS

NEWS SERIES!This chain is part of the new series of stainless steeland plastic chains having a hinge - width of 57 mm.

Versions:






PLASTIC CHAINS:







series

YieldPoint

N


33

8857 TAB SIDEFLEXING CHAINS - HEAVY DUTY


CHAIN - REF. CODE MaterialFinish Width L R SC

Weightµm mm inch. min. Straight Curving Kg/m





SIDEFLEXING CHAINSeries 8857 TAB


38.138.1 Ø 6.35

6.6

9.8

�

R.

TRAVEL

58

SC RD=1503.

112

.7 71.5

18.8

SSE 8857 TAB K750

SSE 8857 TAB K750 HB

10219

10220

EXTRA PLUS

HB10400 0.3 190.5 7.1/2 61750 60 6.10


EXTRAPLUS

YieldPoint

N


NEW

SERIES

“NOLU-S” CURVES


WITH THESE CHAINS!

34

1874 SIDEFLEXING PLATE TOP CHAINS with base roller chains 19.05 mm (3/4”) pitch

CHAIN REF. CODEMaterial

FinishWidth L R SC Weight

µm mm inches min. Straight Curving Kg/mPlate Roller Chain

For sprockets type see page 326


For straighttracks seepage 236

For corner tracks see pages 224 - 225


3.1

23.8

21

31.8

SC

56.5

19

19.05 19.05 Ø 5.08 14.7

�

Ø 11.91

12.7

R.

TRAVEL

RD=260

SIDEFLEXING PLATE TOP CHAINSwith base roller chain 19.05 mm(3/4”) pitch Series 1874

Standard length:160 pitches (10 Ft - 3,048 m)

Advantages:• High speed• Very high loads• Longer conveyors• Easy maintenance• Flights removeable• Lower noise• No chain elongation

Characteristics:Combining the carrying capacity of a high quality sidebow base roller chain with snap-on steel flights, the 1874 serieschain offers a continuous flat conveying surface with an exceptionally high breaking load. The snap-on flight, having TAB shoes, gives further benefit by providing retention within the guide track,both on the carrying and return sections.This product allows for increased conveyorlengths and faster speeds.

11830

11831

11832

1874 K325

1874 SS K325

1874A K325

C 45

EXTRA

C 45

AUSTIC

C 45

82.5

27000

21000

27000

0.6 3.1/4 380 3533.3


Stainless SteelEXTRA

4.2

BreakingLoad

N


“NOLU-S” CURVES


WITH THESE CHAINS!

Straight running steel chainswith high friction surface

Series 815 VG - 815 TAB VG - 805 VG - 8157 VG

82.5 3.1/410500




36

815 VG STRAIGHT RUNNING CHAINS SINGLEHINGE with rubber pads

STRAIGHT RUNNING CHAINS SINGLE HINGE with rubber padsSeries 815 VG

Characteristics:Flat top chains with vulcanized NBR rubber.


Advantages:• High resistance to wear

and tearing• Working temperature

from –30°C to +120°C• High resistance to oil,

grease and acids.• Conveyance up to max 20°

3

42.1

44

3.1

15.8

Ø 6.3538.1 38.1

6.6

RD

9.8

G

� 82

TRAVEL

CHAIN - REF. CODEMaterial Width L G RD Weight

Chain Rubber mm inch. mm mm Kg/m

SSER 815 K325 VGEXTRAPLUS NBR 8500 2.8 2.875

N.B.R.RubberNBR


EXTRAPLUS


YieldPoint

N

3.1/4



10510

815 TAB VG STRAIGHT RUNNING CHAINS SINGLEHINGE with tabs and rubber pads

37

STRAIGHT RUNNING CHAINS with tabs and rubber padsSeries 815 TAB VG



Ø 6.3538.1 38.1

6.6

RD

22.4

G

� 82

3.1 45

4312.7

56.2

319

.4

TRAVEL




grease and acids.• Conveyance up to max 20°• Reduces friction on the return

section of the conveyor.

SSER 815 TAB K325 VGEXTRAPLUS NBR 8500 82.5 2.8 75 3.4

N.B.R.RubberNBR


EXTRAPLUS

For chains material see page16 - 17


For straighttracks seepages 232 ➙ 237



YieldPoint

N



7.1/2

38

805 VG STRAIGHT RUNNING CHAINS DOUBLEHINGE with rubber pads

STRAIGHT RUNNING CHAINS DOUBLE HINGE with rubber padsSeries 805 VG



�

G

135

38.1 38.1 Ø 6.35

6.6

RD

9.8

TRAVEL

3.1

80.5

82.53 15

.8

10502SSE 805 K750 VGEXTRAPLUS NBR 15000 190.5 1.8 150 6.2

N.B.R.RubberNBR


EXTRAPLUS



from –30°C to +120°C.• High resistance to oil,






YieldPoint

N

10512

10515

8157 VG STRAIGHT RUNNING CHAINS - HEAVYDUTY SINGLE HINGE with rubber pads

39

3.1

57

59

3 15.8

38.1 38.1 Ø 6.35

6.6

RD

9.8

�

G

135

TRAVEL

STRAIGHT RUNNING CHAINSHEAVY DUTY SINGLE HINGEwith rubber padsSeries 8157 VG









NBR 10400 190.5 7.1/2 1.8 150 6.0

N.B.R.RubberNBRExtra Plus

Stainless SteelEXTRAPLUS

NEWS SERIES!This chain is part of the new series of stainless steeland plastic chains having a hinge a width of 57 mm.





Versions:






PLASTIC CHAINS:







series

YieldPoint

N


EXTRA PLUS

HB

SSE 8157 K750 VG

SSE 8157 K750 HB - VG

40

8157TAB VG

STRAIGHT RUNNING CHAINS - HEAVYDUTY SINGLE HINGE with rubber pads


12.7 58

71.5

6.1

38.1 38.1 Ø 6.35

6.6

RD

9.8

�

G

135

TRAVEL

18.8

3

60

STRAIGHT RUNNING CHAINSHEAVY DUTY SINGLE HINGEwith rubber padsSeries 8157 VG









10514

10513

SSE 8157 TAB K750 VG

SSE 8157 TAB K750 HB - VG

EXTRA PLUS

HBNBR 10400 190.5 7.1/2 1.8 150 7.5

N.B.R.RubberNBRExtra Plus

Stainless SteelEXTRAPLUS




YieldPoint

N

NEW

SERIES


Sideflexing steel chains with high friction surface

Series 881 VG - 881 TAB VG - 8857 M VG

CHAIN - REF. CODEMaterial Width L R SC Weight

Chain Rubber mm inch. min. Straight Curving Kg/m

42

881 VG SIDEFLEXING CHAINSwith rubber pads

SIDEFLEXING CHAINS with rubber padsSeries 881 VG

Characteristics:Sideflexing chains with vulcanized N.B.R. rubber






10504SSE 881 K325 VG EXTRA NBR 4850 82.5 3.1/4 457 41.344.5 3.1


N.B.R.RubberNBR

38.1 38.1 Ø 6.35

6.6

9.83

SC

43

8°

3.1

11.2

17.3

RD=80

�

R. TRAVEL

82







YieldPoint

N

“NOLU-S” CURVES


WITH THESE CHAINS!



43

881 TAB VG SIDEFLEXING CHAINS with rubber pads

10503SSE 881 TAB K325 VG EXTRA NBR 4850 82.5 3.1/4 457 4546 3.1





38.1 38.1 Ø 6.35

6.6

12.73 SC

43

3.1

56.2

22.4

RD=80

�

R. TRAVEL

82

SUDEFLEXING CHAINSwith rubber padsSeries 881 TAB VG

Characteristics:Sideflexing chains withvulcanized N.B.R. rubber.



N.B.R.RubberNBR







YieldPoint

N

“NOLU-S” CURVES


WITH THESE CHAINS!

44

8857 M VG SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM

SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM with rubber pads Series 8857 M VG

Characteristics:Sideflexing chains with vulcanized N.B.R. rubber


Advantages:• High resistance to wear and tearing• Working temperature from –30°C to +120°C• High resistance to oil, grease and acids.• Conveyance up to max 20°

Characteristics:The chains series 881 M and 8857 M are securely retained in the curve by magnets located under thehinge of chain in the upper part of curve. As there are notab or bevel shoes on these chains they can be easilyremoved from the curve for the purpose of maintenanceor cleaning, without dismantling the chain.

57

SC

33.

1

15.9

38.1 38.1 Ø 6.35

6.6

9.8

�

R.

135

TRAVEL

RD=15017

32



NBR 10400 190.5 7.1/2 750 6061 5.7


EXTRAPLUS

N.B.R.RubberNBR

NEWS SERIES!This chain is part of the new series ofstainless steel and plastic chains havinga hinge a width of 57 mm.



For sprockets type see pages 266➙ 271



Versions:






PLASTIC CHAINS:







series

YieldPoint

N

10511

10516

EXTRA PLUS

HB

SSE 8857 M K750 VG

SSE 8857 M K750 HB - VG

ON REQUEST,

THIS CHAIN TYPE IS ALSO AVAILABLE

WITH TABS.


Straight running plastic chains

Series 820 - 831 - SK 38 - 821 - 8257

46

820 STRAIGHT RUNNING CHAINS

STRAIGHT RUNNING CHAINSSeries 820

Applications:• Food and beverage industry:

Conveying lines for PET bottles,aluminium cans, steel cans.Packaging lines (PET bottle packs inheat shrink film, paper board boxes,cans in heat shrink film).

• Pharmaceutical industry:Conveying lines.

• General purpose conveying applications.


Pin material:Austenitic Steel

CHAIN - REF. CODEMaterial Breaking Width L Weight

PlateLoad

mm inch. Kg/mN

1160211362113591160311365113681137111374

11120G11100G11122G11121G11101G11102G11103G11104G1115011151111571115211153111541115511156

LF 820 K250

LF 820 K325

LF 820 K330

LF 820 K350

LF 820 K400

LF 820 K450

LF 820 K600

LF 820 K750

XPG 820 K250

XPG 820 K325

XPG 820 K330

XPG 820 K350

XPG 820 K400

XPG 820 K450

XPG 820 K600

XPG 820 K750

NG 820 K250

NG 820 K325

NG 820 K330

NG 820 K350

NG 820 K400

NG 820 K450

NG 820 K600

NG 820 K750

LFBrown

XPGDark Grey

NGGreen

5000

4800

4000

63.5

82.5

83.8

88.9

101.6

114.3

152.4

190.5

63.5

82.5

83.8

88.9

101.6

114.3

152.4

190.5

63.5

82.5

83.8

88.9

101.6

114.3

152.4

190.5

2.1/2

3.1/4

3.19/64

3.1/2

4

4.1/2

6

7.1/2

2.1/2

3.1/4

3.19/64

3.1/2

4

4.1/2

6

7.1/2

2.1/2

3.1/4

3.19/64

3.1/2

4

4.1/2

6

7.1/2

0.79

0.85

0.87

0.89

0.95

1.03

1.25

1.47

0.79

0.85

0.87

0.89

0.95

1.03

1.25

1.47

0.79

0.85

0.87

0.89

0.95

1.03

1.25

1.47

Advantages:• Low friction coefficient• Low noise level• Low horsepower requirements• High working load• Excellent flat surface• Dry running

4

44.5 9.5

13.5

7.2

Ø 6.35

42.1�

TRAVEL

RD=5038.1 38.1

ExtraPerformance

Low Friction Acetal Resin

Grey Acetal ResinD

LF

XPG

NewGenerationNG

AbrasionResistance

Anti-static Acetal Resin

High TemperatureResistanceHT

AS

AR


ChemicalResistanceCR




82.5

83.8

82.5

83.8

82.5

83.8

3.1/4

3.19/64

3.1/4

3.19/64

3.1/4

3.19/64


PlateLoad

mm inch. Kg/mN

47

828 STRAIGHT RUNNING CHAINS

11130

11131

11132G

11133G

11134

11135

LF 828 K325

LF 828 K330

XPG 828 K325

XPG 828 K330

NG 828 K325

NG 828 K330

LFBrown

XPGDark Grey

NGGreen

6000

5600

5000

1.10

1.15

1.10

1.15

1.10

1.15



Conveying lines for PET bottles,aluminium cans, steel cans.

• Packaging lines (PET bottle packs inheat shrink film, paper board boxes,cans in heat shrink film)

• Pharmaceutical industry:Conveying lines.

• General conveying applications.



Ø 7

.14

7.6

�

11.2

TRAVEL

38.1 38.1RD=50

42.1

4

Features:Standardization• Identical sprockets as 880M series• Easy wear strip configuration

at drive side• Identical hinge width as 820 series• Same top plate thickness as 820 seriesHigh load capacity• Higher than 820 series• More freedom for conveyor designVery Versatile• Particularly suitable for accumulation

tables as well as for pressure-lesscombiners

• Can be used adjacent to 820 and 880 chains

Improved product stability• Reduced gap between adjacent tracks• Special convex shape of the plate• Better topplate flattness in the hinge area

ExtraPerformance


Grey Acetal ResinD

LF

XPG

NewGenerationNG

AbrasionResistance



AS

AR






- HIGH LOAD CAPACITY.

- ZERO GAP.

11607

11608

11609

11105G

11106G

11107G

11160

11161

11162

LF 831 K325

LF 831 K450

LF 831 K750

XPG 831 K325

XPG 831 K450

XPG 831 K750

NG 831 K325

NG 831 K450

NG 831 K750

48

831


PlateLoad

mm inch. Kg/mN

LFBrown

XPGDark Grey

NGGreen

5000

4800

4000

82.5

114.3

190.5

82.5

114.3

190.5

82.5

114.3

190.5

3.1/4

4.1/2

7.1/2

3.1/4

4.1/2

7.1/2

3.1/4

4.1/2

7.1/2

1.04

1.29

1.82

1.04

1.29

1.82

1.04

1.29

1.82

STRAIGHT RUNNING CHAINS


Characteristics:Thicker top plate than 820 seriesSingle Hinge with a centre reinforcingbar an the underside of the chains.

Note:The 831 series has a thicker top plate(4.8 mm) giving 20% more wear life.It also simplifies conveyor design when matching chains from the series821 - 879 - 882 - 8257 - 882 M

8.7

13.5

7.2

Ø 6.35

4.8

44.5

42.1�

TRAVEL

38.1 38.1RD=50

Advantages:• Low friction coefficient• Low noise level• Low horsepower requirements• High working load• Excellent flat surface• Dry running


ExtraPerformance


Grey Acetal ResinD

LF

XPG

NewGenerationNG

AbrasionResistance



AS

AR







Top plate with constant

thickness 4.8 mm.

NEW

DESIGN


PlateLoad

mm inch. Kg/mN

11410

11411

11412G

11413G

11414

11415

49



SK 38 STRAIGHT RUNNING CHAINSMINI SINGLE HINGE

STRAIGHT RUNNING CHAINSMINI SINGLE HINGESeries SK 38



Applications:• Exclusive mini hinge

plastic chain for use in applications where space is restricted

• Ideal for conveying containers in the cosmetic or pharmaceutical industries

SK 38 K32 LF

SK 38 K50 LF

SK 38 K32 XPG

SK 38 K50 XPG

SK 38 K32 NG

SK 38 K50 NG

LFBrown

XPGDark Grey

NGGreen

2000

1900

1700

32.0

50.8

32.0

50.8

32.0

50.8

1.1/4

2

1.1/4

2

1.1/4

2

0.25

0.35

0.25

0.35

0.25

0.35

NewGenerationNG

ExtraPerformance

Low Friction Acetal ResinLF

XPG

TRAVEL

Ø6 38.1 38.1

12.7

RD=8032

3

20

20

Ø6 38.1 38.1

12

RD=80

20

503

TRAVEL

20

SK 38 K32

SK 38 K50

11002

11004

11006

11510G

11511G

11512G

11170

11171

11172

821 STRAIGHT RUNNING CHAINSDOUBLE HINGE

STRAIGHT RUNNING CHAINSDOUBLE HINGESeries 821

Note:These chains have a double hingleand double reinforcing bars.


Advantages:Load carring capacity is this increased and is similar to that of a single hinge stainless steel chains.

140

4.8

9.5

38.1 38.1 8

Ø 6.35

14.3

�

TRAVEL

RD=50

136.5


PlateLoad

mm inch. Kg/mN

LF 821 K750

LF 821 K1000

LF 821 K1200

XPG 821 K750

XPG 821 K1000

XPG 821 K1200

NG 821 K750

NG 821 K1000

NG 821 K1200

LFBrown

XPGDark Grey

NGGreen

8300

8100

7800

190.5

254.0

304.8

190.5

254.0

304.8

190.5

254.0

304.8

71/2

10

12

71/2

10

12

71/2

10

12

2.59

3.08

3.35

2.59

3.08

3.35

2.59

3.08

3.35

NewGenerationNG

ExtraPerformance


Grey Acetal ResinD

LF

XPG






50


PlateLoad

mm inch. Kg/mN

51




8257 STRAIGHT RUNNING CHAINSHEAVY DUTY SINGLE HINGE

STRAIGHT RUNNING CHAINSHEAVY DUTY SINGLE HINGESeries 8257


14.2

9.5

Ø 8

19

60

4.8

57 �

TRAVEL

RD=5038.1 38.1

111671116811169111751117611177

11450G11451G11452G111801118111182

LF 8257 K750

LF 8257 K1000

LF 8257 K1200

LFG 8257 K750

LFG 8257 K1000

LFG 8257 K1200

XPG 8257 K750

XPG 8257 K1000

XPG 8257 K1200

NG 8257 K750

NG 8257 K1000

NG 8257 K1200

LFBrown

LFGDark Grey

XPGDark Grey

NGGreen

10000

10000

9500

9000

190.5

254.0

304.8

190.5

254.0

304.8

190.5

254.0

304.8

190.5

254.0

304.8

71/2

10

12

71/2

10

12

71/2

10

12

71/2

10

12

2.20

2.55

2.90

2.20

2.55

2.90

2.20

2.55

2.90

2.20

2.55

2.90

Advantages:There are several advantages by using the new type ofchains (stainless steel and plastic).As a matter of fact there are chains for straight runningand sideflexing (magnetic system) applications, as wellas chains for product accumulation (LBP series) and forinclined sections (chains with rubber pad), but thestructure of the conveyors does not change (upperspacers) as the standard width of the hinge enablesthe use of the same guides for the same chain width.

NewGenerationNGExtra

PerformanceLow Friction Acetal Resin

LFLFG XPG


NEWS SERIES!This chain is part of the new series of stainless steeland plastic chains having a hinge - width of 57 mm.

Versions:






PLASTIC CHAINS:







series

Sideflexing plastic chains

Series 878 TAB - 879 - 879 TAB - 880 - 880 TAB - 880M

879M - 882 - 882 TAB - 882M

4

4.8

41.3

41.3

44.5

44.5

457

457

11506

11507

11508G

11509G

11193

11194

11383

11189

11386

11502G

11188G

11503G

11187

11186

11185

CHAIN REF. CODEMaterial Width L R SC Weight

Plate mm inches min. Straight Curving Kg/m






54

879880

SIDEFLEXING CHAINS

LF 880 K325

LF 880 K350

LF 880 K450

XPG 880 K325

XPG 880 K350

XPG 880 K450

NG 880 K325

NG 880 K350

NG 880 K450

LF 879 K325

LF 879 K450

XPG 879 K325

XPG 879 K450

NG 879 K325

NG 879 K450

LFBrown

XPGDark Grey

NGGreen

LFBrown

XPGDark Grey

NGGreen

6000

5700

5000

6000

5700

5000

82.5

88.9

114.3

82.5

88.9

114.3

82.5

88.9

114.3

82.5

114.3

82.5

114.3

82.5

114.3

3.1/4

3.1/2

4.1/2

3.1/4

3.1/2

4.1/2

3.1/4

3.1/2

4.1/2

3.1/4

4.1/2

3.1/4

4.1/2

3.1/4

4.1/2

0.89

0.92

1.04

0.89

0.92

1.04

0.89

0.92

1.04

0.93

1.10

0.93

1.10

0.93

1.10




Note:The 879 series has thicker top plate(4.8 mm) giving up to 20% morewear life. It also simplifies conveyordesign when matching chains fromthe series 821, 831, 879 and 882.




Conveying lines for PET bottles,aluminium cans and steel cans.Packaging lines (PET bottle packs in heat shrink film, paper board boxes, cans in heat shrink film).

• Pharmaceutical industry.• General purpose conveying

applications.

16�

SC

42.98°

7.55

Ø 7

.14

�R.

TRAVEL

RD=50

38.1 38.1

ExtraPerformance


Grey Acetal ResinD

LF

XPG

NewGenerationNG

AbrasionResistance



AS

AR



BreakingLoad

N

BTickness

mm

“NOLU-S” CURVES


WITH THESE CHAINS!

RANGE

EXTENSION

880 TAB K330

0.940.961.011.080.940.961.011.080.940.961.011.08

0.981.140.981.140.981.14

6000

5700

5000

6000

5700

5000

82.5

83.8

88.9

114.3

82.5

83.8

88.9

114.3

82.5

83.8

88.9

114.3

82.5

114.3

82.5

114.3

82.5

114.3

3.1/4

3.19/64

3.1/2

4.1/2

3.1/4

3.19/64

3.1/2

4.1/2

3.1/4

3.19/64

3.1/2

4.1/2

3.1/4

4.1/2

3.1/4

4.1/2

3.1/4

4.1/2

4

4.8

457

457

45

45

46

46

11377ST11380ST11504G11505G1119811199

11377112591119011380

11500G11260G11191G11501G11195112611119611197






7.55

Ø 7

.14

�

R.

SC

42.1

16

61

11.5

�TRAVEL

38.1 38.1

RD=50

55

879 TAB880 TAB

SIDEFLEXING CHAINS


LF 880 TAB K325

LF 880 TAB K330

LF 880 TAB K350

LF 880 TAB K450

XPG 880 TAB K325

XPG 880 TAB K330

XPG 880 TAB K350

XPG 880 TAB K450

NG 880 TAB K325

NG 880 TAB K330

NG 880 TAB K350

NG 880 TAB K450

LF 879 TAB K325

LF 879 TAB K450

XPG 879 TAB K325

XPG 879 TAB K450

NG 879 TAB K325

NG 879 TAB K450

LFBrown

XPGDark Grey

NGGreen

LFBrown

XPGDark Grey

NGGreen



Note:The 879 TAB seriess has thicker topplate (4.8 mm) giving up to 20%more wear life. It also simplifies conveyor design when matchingchains from the series 821, 831, 879 and 882.




Conveying lines for PET bottles,aluminium cans and steel cans.Packaging lines (PET bottle packs in heat shrink film, paper board boxes, cans in heat shrink film).


applications.

ExtraPerformance


Grey Acetal ResinD

LF

XPG

NewGenerationNG

AbrasionResistance



AS

AR





BreakingLoad

N

BTickness

mm

“NOLU-S” CURVES


WITH THESE CHAINS!

LF 878 TAB K325

XPG 878 TAB K325

NG 878 TAB K325

LFBrown

XPGDark Grey

NGGreen

6000

5700

5000

82.5

82.5

82.5

3.1/4

3.1/4

3.1/4

190 4546

0.88

0.88

0.88



56

878 TAB SIDEFLEXINGCHAINS

ExtraPerformance


XPG

8.3

7.05

SC

42.1

61.8

11.8

4.8

20.8

�

R.

TRAVEL

38.1 38.1RD=50


Standard length:80 pitches (10 Ft - 3.048 m)


Conveying lines for PET bottles,aluminium cans, steel cansPackaging lines (PET bottlepacks in heat shrink film,paper board boxes, cans inheat shrink film).


applications.

Advantages:• Small sideflexing radius R=190 mm• Tangential engagement.• Specially shaped flights with a

different radius on the edges to improve the co-efficient of frictionbetween the product and chain surfaces.

• Small gap between flights to improve product stability.

• Bidirectional.

Characteristics:The new 878 TAB series enables the designer and the manufacturerof sideflexing conveyors to reducethe average radius of the curves.This chain is suitable for solving conveying problems in confined spaces. Can also be used where products are conveyed on an incline or decline and accumulationmay occur. The characteristics of thischain make this product unique in its design.

Pin material:Austenitic Steel.

Minimum Radius. R.190 mmStandard Radius. R.200 mm

11390

11420G

11422

NewGenerationNG

For turning disks seepages 328 - 329




For corner tracks see pages 216 - 217 - 226


BreakingLoad

N

“NOLU-S” CURVES


WITH THESE CHAINS!

57

879 M880 M

SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM

Ø 7

.14

7.55

�

R.

11.1

TRAVEL

38.1 38.1RD=50

�

SC

42.1

13.5

27

SIDEFLEXING CHAINSFOR MAGNETIC SYSTEMSeries 880M


Adavantages:• One conveyor construction• Easy to clean• Easy maintenance• Improved wear life• Hygienic conceptPin material:Ferritic Stainless Steel

SIDEFLEXING CHAINSFOR MAGNETIC SYSTEMSeries 879M


Note:This chain has thicker top plate of 4,8 mm, giving approximately20% more wear life.It also simplifies conveyor designwhen matching chains from theseries 821 - 831 - 879 - 879 TAB882 - 882 M - 8257 - 882 M

Characteristics:Plastic Magnetic System chains do not have TAB or BEVEL shoes.The ferritic stainless steel pins aresecurely retained in position by the magnets located in the uppersection of the curve.These chains can be easily removed from the curve for maintenance or cleaning, withoutdismantling the chain.

LF 880 M K325

LF 880 M K330

LF 880 M K450

LF 880 M K750

XPG 880 M K325

XPG 880 M K330

XPG 880 M K450

XPG 880 M K750

NG 880 M K325

NG 880 M K330

NG 880 M K450

NG 880 M K750

LF 879 M K325

LF 879 M K450

XPG 879 M K325

XPG 879 M K450

NG 879 M K325

NG 879 M K450

LFBrown

XPGDark Grey

NGGreen

LFBrown

XPGDark Grey

NGGreen

5700

5500

5200

5700

5500

5200

82.5

83.8

114.3

190.5

82.5

83.8

114.3

190.5

82.5

83.8

114.3

190.5

82.5

114.3

82.5

114.3

82.5

114.3

3.1/4

3.19/64

4.1/2

7.1/2

3.1/4

3.19/64

4.1/2

7.1/2

3.1/4

3.19/64

4.1/2

7.1/2

3.1/4

4.1/2

3.1/4

4.1/2

3.1/4

4.1/2

4

4.8

500

500

44

44

45

45

1.05

1.08

1.15

1.50

1.05

1.08

1.15

1.50

1.05

1.08

1.15

1.50

1.15

1.25

1.15

1.25

1.15

1.25

11395M

11396M

11397MG

11398MG

11198M

11421M

11377M

11222M

11380M

11393M

11500MG

11223MG

11501MG

11394MG

11195M

11224M

11197M

11420M




ExtraPerformance


XPG

NewGenerationNG




BreakingLoad

N

BTickness

mm

IMPROVED

DESIGN

58

882BEVEL

SIDEFLEXING CHAINS

SIDEFLEXING CHAINS Series 882 BEVEL

Characteristics:The 882 type has a larger pinsize hinge geometry and because ofa well balanced distribution of thematerial it has an excellent carryingload capacity comparable with the821 double hinge chain.

The standard widths are produced up to254 mm (10”) making it compatable withthe 821 series and offers the largest conveying area in the flat top chainproducts.


Note:This chain is available in three versions:• Sideflexing chains with bevelled

guide shoes series 882 BEVEL.• Sideflexing chains with

hold-down tabs series 882 TAB.• Sideflexing chains magnetic

system series 882 M.


�8.

73 9.5

22.3

SC

61

4.8

17.58°

R.

TRAVEL

38.1 38.1RD=50

11459

11460

11461

11462G

11463G

11464G

11480

11481

11482

LF 882 K450

LF 882 K750

LF 882 K1000

XPG 882 K450

XPG 882 K750

XPG 882 K1000

NG 882 K450

NG 882 K750

NG 882 K1000

LFBrown

XPGDark Grey

NGGreen

10000

9500

9000

114.3

190.5

254.0

114.3

190.5

254.0

114.3

190.5

254.0

4.1/2

7.1/2

10

4.1/2

7.1/2

10

4.1/2

7.1/2

10

5862

1.94

2.38

2.83

1.94

2.38

2.83

1.94

2.38

2.83

Advantages:• Heavy duty• Exceptionally flat surface• Soft line bevelling• Low coefficient of friction• Total high quality

ExtraPerformance


XPG

NewGenerationNG








BreakingLoad

N

610

“NOLU-S” CURVES


WITH THESE CHAINS!






59

882 TAB SIDEFLEXING CHAINS

�8.

73

9.5

SC

17.2

56.6

76

4.8

22.2

R.

27

TRAVEL

38.1 38.1RD=50

SIDEFLEXING CHAINS Series 882 TAB

Characteristics:The 882 TAB type has a larger pin sizehinge geometry and because of a wellbalanced distribution of the material ithas an excellent carrying load capacitycomparable with the 821 double hingechain.

The standard widths are produced upto 304.8 mm (12”) mailing it compata-ble with the 821 series and offers thelargest conveying area in the flat topchain products.


Note:This chain is available in three versions:• Sideflexing chains with hold-down

tab shoes series 882 TAB.• Sideflexing chains with bevelled

guide shoes series 882 BEVEL.• Sideflexing chains magnetic

system series 882 M.


11040

11041

11042

11043

11513G

11514G

11515G

11516G

11483

11484

11485

11486

LF 882 TAB K450

LF 882 TAB K750

LF 882 TAB K1000

LF 882 TAB K1200

XPG 882 TAB K450

XPG 882 TAB K750

XPG 882 TAB K1000

XPG 882 TAB K1200

NG 882 TAB K450

NG 882 TAB K750

NG 882 TAB K1000

NG 882 TAB K1200

LFBrown

XPGDark Grey

NGGreen

10000

9500

9000

114.3

190.5

254.0

304.8

114.3

190.5

254.0

304.8

114.3

190.5

254.0

304.8

4.1/2

7.1/2

10

12

4.1/2

7.1/2

10

12

4.1/2

7.1/2

10

12

610 5860

2.03

2.46

2.87

3.41

2.03

2.46

2.87

3.41

2.03

2.46

2.87

3.41

Advantages:• Heavy duty• Exceptionally flat surface• Soft line bevelling• Low coefficient of friction• Total high quality

ExtraPerformance


XPG

NewGenerationNG



BreakingLoad

N

“NOLU-S” CURVES


WITH THESE CHAINS!



BreakingLoad

N

60

882 M SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM

SC57

4.8

14.2

19

Ø 8 9.

5

�

R.

TRAVEL

38.1 38.1

RD=50

17

32

114871148811489114901149111492

11465G11466G11467G114931149411495

LF 882 M K750LF 882 M K1000LF 882 M K1200

LFG 882 M K750LFG 882 M K1000LFG 882 M K1200XPG 882 M K750XPG 882 M K1000XPG 882 M K1200

NG 882 M K750NG 882 M K1000NG 882 M K1200

LFBrown

LFGDark Grey

XPGDark Grey

NGGreen

10000

10000

9500

9000

190.5254.0304.8190.5254.0304.8190.5254.0304.8190.5254.0304.8

7.1/2

1012

7.1/2

1012

7.1/2

1012

7.1/2

1012

610 6061

2.152.452.702.152.452.702.152.452.702.152.452.70



SIDEFLEXING CHAINS FORMAGNETIC SYSTEMSeries 882 MStandard length:80 pitches (10 ft. - 3.048 m).

Pin material:Ferritic Stainless Steel

Characteristics:Plastic magnetic system chains donot have tabs or bevels shoes, it isthe ferritic Stainless Steel pin in thechain that is attracted by themagnets embedded in the curve.

Advantages:• One conveyor construction• Heavy duty• Exceptionally flat surface• Total high quality• Hygienic concept• Easy maintenance• Easy to clean

There are several advantageswhen using this new series ofchains which include versions forstraight running and sideflexingapplications (magnetic system),chains for product accumulation (LBP series) and for inclined sections (chains with rubberpad).The structure of the conveyors does not change (upper spacers) as the standard of the hingewidth of 57 mm enable the use of the same guides with any ofthe above versions.

NEWS SERIES!This chain is part of the new series ofstainless steel and plastic chainshaving a hinge - width of 57 mm.

ExtraPerformance


LFLFG XPG New

GenerationNGFor chemicalresistance seepages 338 - 339

series 812/815 - 800/802/805 - 8157 - 515 - saehan · pdf filestraight running steel chains...

Documents