Bulletin 201M 10/07

Penguin vertical immersible pumps are compact, portable, and self-priming when immersed. Simple in design and effi cient in performance, this pump has only one moving part. Constructed completely of CPVC, polypropylene, or PVDF where in contact with the solution, this pump is suitable for pumping, agitating, fi ltering, or circulating acid and alkaline solutions (pH 0-14), abrasive fl uids, and other cor-rosive solutions. Maximum temperature ratings are as follows: CPVC-180ºF, polypropylene-150ºF, and PVDF-260ºF. Because PVDF is ultra pure, it is rec-ommended for use in high purity deionized water, HF, and liquids that must remain contamination free. The Penguin vertical pump has a rigid, solid stain-less steel, one-piece rotor drive shaft covered with a two-piece sleeve and impeller. Titanium shafts are available as an option. Because of the unique double impeller design, this pump has no seals, no pump bearings, no bushings, no wearing parts, and thus bearings, no bushings, no wearing parts, and thus requires little maintenance.requires little maintenance.

Features:• Choice of CPVC, PVDF, or Polypropylene• Sealless• Runs Dry Without Damage• Self-Priming When Immersed• No Metal Contact• Chemical Resistant • Extended Pump Lengths Available (See Bulletin 216)

Recommended Applications:• Sump Pumping / Draining• Transfer Pumping• Recirculation Pumping• Plating • Wet Fume Scrubbing• Waste Treatment• Wet Processing• Etching• Filtering

Model P-7 1/2AK

Flows from 9 to 175 GPMPressure to 166 Ft. TDH

As a standard feature on our P-1/4 HP model and up, the Penguin vertical pump comes equipped with a plugged air purge in the bottom (shaft end) endbell of the motor. If utilized, this air purge requires a minimum of 5 psi to create a positive displacement, extending the life of the lower motor bearing.

The Penguin vertical pump is equipped with a totally enclosed fan cooled (TEFC) motor. Most motor hous-ings come standard with epoxy coating for additional corrosion resistance and oversized shaft end bearings for longer life and easy replacement. Single phase motors are wired 115V and equipped with a 6 foot cord and grounded plug unless otherwise specifi ed. All three phase motors are shipped unwired.

Penguin vertical pumps are versatile, easy to install, and require a minimal amount of tank space, thus saving valuable fl oor space. Most can be easily moved from tank to tank, with mounting either internally or externally on the tank fl ange.on the tank fl ange.

Series PSeries PSeries P

PenguinVertical Pump

Series PSeries PSeries P

PenguinVertical Pump

10

5 10 15.01.02.03.04.05.06.07.08HP

ABSO

RBED

PO

WER

60 Hz

50 Hz

5

TDH

2

M FT.

GPM19 38 LPM

FLOW(GPM/LPM)

3

57

.01

.02

.03

.04

.05

.06

.07

.08

50 Hz

60 Hz10

15

5 10 15 20 25

20

HP

AB

SOR

BED

PO

WER

30

5

TDH

2

6

5

M FT.

GPM19 38 57 76 LPM

FLOW(GPM/LPM)95 114

3

10

15

5 10 15 20 25

20

.1

.2

.3

.4

HP

AB

SOR

BED

PO

WER

30

50 Hz

60 Hz

5

TDH

60 Hz

50 Hz

2

6

5

M FT.

GPM19 38 57 76 LPM

FLOW(GPM/LPM)95 114

3

Performance ChartsP-1/15

P-1/6

P-1/4

1

2

3

4

5

6

7

1. Motor fan cover with drip shield.2. Standard TEFC Epoxy coated motor.3. Air purge plug.4. One-piece stainless steel rotor shaft assembly. Optional 316 SS or Titanimm shaft available on most models.5. Viton vapor seal/fume barrier assembly.6. Sleeved O-ring sealed compound impeller for non metallic 6. Sleeved O-ring sealed compound impeller for non metallic solution contact.7. Overfl ow.

Penguin Design FeaturesOn Most Models

2

Series PSeries PSeries PPenguinVertical Pump

5

10

15

10 20 30 40.1.2

.3

.4

.5

.6

.7

.8HP

GPMAB

SORB

ED P

OWER

20

TDH

60 Hz

60 Hz

50 Hz

50 Hz

FT.

6.0

M

LPMFLOW(GPM/LPM)

1.5

4.5

3.0

38 76 114 151

Performance ChartsPerformance Charts

FLOW(GPM/LPM)

18

3

6

9

12

15

M

38 76 114 151 190 227 LPM265 303

.25

.50

.75

1.00

HP

AB

SOR

BED

PO

WER

1.25

60 Hz

60 Hz

50 Hz

50 Hz

10 20 30 40 50 60 70 80

10

20

30

40

50

60

TDH

FT.

GPM

1.50

P-1/2

P-3/4

P-1/2-HP

P-3/4-HP

P-1

P-1 1/2

3

10 20 30 40 50.1.2

.3

.4

.5

.6

.7

.8HP

ABSO

RBED

POW

ER

30

60

50 Hz

60 Hz

5

10

15

20

25

TDH

FLOW(GPM/LPM)

60 Hz

50 Hz

9

2

3

5

6

8

M FT.

GPM38 76 114 151 190 227 LPM

FLOW(GPM/LPM)

18

3

6

9

12

15

M

38 76 114 151 190 227 LPM265 303

.25

.50

.75

1.00

HP AB

SO

RB

ED

PO

WE

R

1.25

60 Hz

60 Hz

50 Hz

50 Hz

10 20 30 40 50 60 70 80

10

20

30

40

50

60

TDH

FT.

GPM

30

.25

.50

.75

1.00

1.25

1.50

HP

AB

SO

RB

ED

PO

WE

R

10 20 30 40 50 60 70

10

20

60HZ

50HZ

60HZ50HZ

TDH

3

6

9

M FT.

GPM38 76 114 151 190 227 LPM

FLOW(GPM/LPM)265

.51.01.5

HP

AB

SOR

BED

PO

WER

10 20 30 40 50 60 70 80 90

10

20

30

40

50

60

70 60HZ

50HZ

60HZ

50HZ

TDH

21

3

6

9

12

15

M FT.

GPM38 76 114 151 190 227 LPM

FLOW(GPM/LPM)

18

265 303 341

Performance ChartsP-2 P-3

P-7 1/2P-5

4

Performance Charts

100 120

40

50

60

70

80

90

100

60 Hz

50 Hz

50 Hz20 40 60 80

.51.01.52.02.53.0HP

FLOW(GPM/LPM)

18

3

6

9

12

15

M

76 151 227 LPM303

AB

SO

RB

ED

PO

WE

R

60 Hz

10

20

30

TDH

FT.

GPM379 454

21

24

27

31

1038

519

.51.01.52.02.53.0HP

160

FLOW(GPM/LPM)

18

3

6

9

12

15

M

76 151 227 LPM303

AB

SO

RB

ED

PO

WE

R

10

20

30

TDH

FT.

GPM

60 Hz

379 454 530 606

21

24

2731

100 120 140

40

50

60

70

80

90

100

60 Hz

50 Hz

50 Hz20 40 60 80

120

140

160

1.02.03.0

HP

160

FLOW(GPM/LPM)

18

6

12

M

76 151 227 LPM303

AB

SO

RB

ED

PO

WE

R

20

TDH

FT.

GPM

60 Hz

379 454 530 606

24

31

100 120 140

40

60

80

100

60 Hz

50 Hz

20 40 60 80 180681

200757

37

43

49

4.05.06.07.08.0

50 Hz

120

140

160

1.0

2.0

3.0

HP

160

FLOW(GPM/LPM)

18

6

12

M

76 151 227 LPM303A

BSO

RB

ED P

OW

ER

20

TDH

FT.

GPM

60 Hz 6"

379 454 530 606

24

31

100 120 140

40

60

80

100

60 Hz 6"

50 Hz 7"

50 Hz 6"

20 40 60 80 180

681

200

757

37

43

49

4.0

5.0

6.0

7.0

8.0

50 Hz 7"

50 Hz 6"

7-1/2”

7-3/8”(ref)

3”

4-1/2” 5-1/2”

1”

3/8”ø

15/16”

Mounting Diagram P3 - P7 1/2Mounting Diagram P1/2 - P2

6.50”6.50”

4 SLOTS.34 WIDE

4.88”4.88”

4.32”

3”3”

Series PSeries PSeries PPenguinVertical Pump

P-1/15

5

Model A B C D E F G H Suction DischargeP-1/15 2 1/2 2 1/2 5 3/4 9 3/8 2 3/8 14 3/8 3 3/4 5/8 3/4 MPT 1/2 FPTP-1/6 2 1/4 3 1/4 6 1/2 8 7/8 1 1/2 4 1P-1/4 3 1/2 8 9 3/8 19 5/8 5 1 1/8 1 FPT 3/4 FPTP-1/2 3 3/4 3 3/4 10 3/4 1 3/4 23 1/4 6 1/2 1 1/4P-1/2HP 4 1/2 5 1/2 10 3/8 2 22 5/8 6 1 5/8 1 1/2 FPTP-3/4 3 3/4 3 3/4 10 3/4 1 3/4 23 1/4 6 1/2 1 1/4 1 1/4 FPTP-3/4HP 9 1/4 1 MPTP-1 4 1/2 5 1/2 10 3/8 2 22 5/8 6 1 5/8 1 1/2 FPTP-1 1/2P-2 23 3/4P-3* 6 7 12 12 1/2 3 28 1/4 12 2 1/8 1 1/2MPTP-5* 2 FPTP-7 1/2 5 1/2 5 15 3/10 12 2 5/8 28 3/4 3 1/8

Dimensions

P-1/4

P-1/2-P-2

P-1/6

SEE NOTES

Top View

P-7 1/2P-3 & 5

Series PSeries PSeries P

PenguinVertical Pump

Series PSeries PSeries P

Nomenclature

P XX X - XX - XX - XX - XX

PenguinVerticalPump

Horsepower Construction Material/O-Ring Elastomer Material

Impeller/HousingConfi guration

Shaft Confi guration

ShaftMaterial

PumpBracket Confi g.

1/15=1/151/6=1/61/4=1/31/2=1/23/4=3/41=11 1/2=1 1/22=23=35=57 1/2=7 1/2

A = CPVC/EPR B = Polypropylene/EPR C = PVDF/Viton

None = StandardHP = High Pressure

None = ThreadedK = Keyway/Thrd Screw&Nut

None = 316SS T = Titanium

None=BracketRB = Round FlangeDP = Bracket Rigid Plumbed

“RB” round fl ange applies to models P3, P5 & 7 1/2 only.“B” polypro and “C” PVDF models are only available with RB round fl ange confi guration.“A” CPVC models are available with standard bracket.Optional “RB” includes round fl angeOptional “DP” includes bracket and rigid plumbed confi gurations.

1

1

“K” Keyway impeller-P3, P5 & P7-1/2“K” Threaded screw/w nut impeller-1/2HP, 3/4HP, 1, 1-1/2, 2

2

2

SpecificationsMax Max Max Max

Model Flow Head Flow Head Motor Dimensions(gpm) (ft) 50HZ (LPM) 50HZ (M) HP RPM Volts Hertz Phase Amps Ht Wth Lth Wt

P-1/15 12 9 10 6 1/15 3000/2450 115 2.0 10 10 18 91/25 3300/2700 208-230 0.9-0.8

P-1/6 22.5 18 19 12 1/6 3200 115 60/50 1 2.0 19 112675 208-230 1.3-1.2

P-1/4 33 18.5 27 13 1/3 3450 110/220 5.4/2.7 272850 230/460 3 1.2/0.6 26

115/230 60 1 7.8/3.9 45P-1/2 40 23 33 16 6.4/3.2 47

1/2 208-230/460 60/50 3 1.9-1.8/.09 43115/230 60 1 7.8/3.9 45

P-1/2HP 66 35 55 24 60/50 6.4/3.2 11 11 26 47208-230/460 3 1.9-1.8/9 43

115/230 60 1 9.8/4.9 47P-3/4 64 27.5 53 19 3/4 60/50 10/5 48

208-230/460 3 2.7-2.6/1.3 46115/230 60 1 9.8/4.9 47

P-3/4HP 70 46 58 31 3/4 3450 60/50 10/5 482850 208-230/460 3 2.7-2.6/1.3 46

115/230 60 1 11/5.5 50P-1 74 52 61 36 1 60/50 12.8/6.4 52

208-230/460 3 3.4-3.2/1.6 47P- 1 1/2 82 62 68 42 1 1/2 115/230 1 17.8/8.9 55

208-230/460 4.9-4.6/2.3 48P-2 112 69 93 47 2 5.8-5.4/2.7 60P-3 135 88 112 60 3 8.2-7.8/3.9 100

208-230/460 3P-5 172 122 142 83 5 12.2-11.6/5.8 21 16 36 120

P-7 1/2 175 166 145 113 7 1/2 20.5-19.0/9.5 130

Bulletin 201M 10/07

Penguin Vertical Pump