series sc-ii horizontal split case pumps · half of the casing without disturbing suction and...
TRANSCRIPT
Series SC-II Horizontal Split Case Pumps
Release: August 20.2014 Revision 1
Section: 7A.0 Product Overview
Section: 7A.1 Technical Engineering product Data
Section: 7A.2 Performance Curves-1750 RPM
Section: 7A.3 Dimensional Data
Section: 7A.4 Operations Manual
1
Series 1 Series 2 Series 3
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
2
Single Stage Double Suction
Horizontal Split Case Series: SC-II Flow Rates to 15,000 GPM Heads to: 800’TDH
• Condenser Water • Chilled Water • Municipal Booster • Steel Mill Contact Water • Municipal Transport • Desalinization Transport • Power Plant Circulating Water • Filter Water Pumps • Cooling Tower Transfer
• Cast Iron • Ductile Iron • Stainless Steel
Available Materials
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Bulletin SC-II Rev.1 Single Stage Split Case Pumps 7A.0
Working Pressure and Temperatures • 400 PSI • 250 Degree F
3
Series 3 Single Volute
Circulation Lines: Mechanical Seal flush provided with piped circulation lines. Available with abrasive separators
Mechanical Seals: Available in working pressures to 400PSI and temperatures to 250 degree F
Bearings: SKF-Grease or oil lubricated design
Casings: Horizontal Split case type available in multiple metallurgy with case working pressure in excess of 400PSI.
Shaft Sleeves: Standard 400 Series Stainless Steel. Available in numerous materials. Protects shaft from wear and tear with no threaded connections to shaft
Shaft: High tensile steel shaft designed for maximum HP loads. Large diameter design and shortened span minimize shaft vibration.
Double Suction: Split water passageway balances axial loads by providing even distribution of water to each side of the impeller.
Case Wear Rings: Replaceable case wear rings protects casing from wear and tear and maintains tolerances for optimum pump performance.
Impeller: Energy efficient design with double suction feature for balanced axial loads, available in cast iron, bronze and stainless steel.
Series SC-II Horizontal Split Case Design
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Bulletin SC-II Rev.1 Single Stage Split Case Pumps 7A.0
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 4
Bulletin SC-II Rev.1 Single Stage Split Case Pumps 7A.0
Quick Reference Guide-Series SC-II Single Stage Double Suction Split Case Pumps
Standard Optional
Cast Iron fitted pump construction with cast iron impeller.
Material available in cast iron, bronze, ductile iron and stainless steel.
400 Series Stainless Steel Shaft Sleeves Shaft sleeves available in 300 series stainless steel and bronze construction
Cast iron case wear rings. Wear rings available in bronze, and stainless steel construction
Carbon Steel Shaft Shaft available in higher tensile steel, and stainless steel construction.
Dynamic balanced impeller. Oil lubricated ball bearing
Series 1&2 Pump designs are double volute, series 3 pump design are single volute.
Ductile Iron and stainless steel construction available for high working pressure requirements (based upon temperature and type of fluid pumped).
Steel Impeller key Stainless steel and hardened steel impeller keys available based upon the application.
Single row inboard and outboard bearing for series 2 &3 pumps design, Roller bearings for Series 1 design.
Pumps available in clockwise and counterclockwise rotation based upon application. Pumps available for electric motor, natural gas or diesel engine driven design.
Mechanical seals-single type-unbalanced.
Balanced mechanical seals for working pressures in excess of 400PSI.
Copper seal flush lines from pump casing to seal chamber
Stainless steel seal flush lines and cyclone separators (available in multiple materials) for particle removal prior to seal flush.
125 Lb. ASA Flanged Pump Connections
250 Lb. suction and discharge flange connection in cast iron, 150 to 300 Lb. flange ratings in ductile iron and stainless steel.
Case lift lug in upper half casings Pumps available with fabricated steel baseplates, couplings and energy efficient motors assembled as single unit
Hydrostatic test Packaged variable speed energy efficient pump systems with piping and variable frequency drives integrated as a single unit.
Coupling Guard Coupling available as short coupled flex type, spacer coupling of other coupling depending upon driver type and design.
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 5
Bulletin SC-II Rev.1 Single Stage Split Case Pumps 7A.0
Furnish and install as outlined in the plans and described in these specifications Federal Pump Series SC-II Horizontal Split Case single stage double suction centrifugal pump designed to deliver the scheduled flow rate (GPM) at the scheduled total dynamic head (TDH) in feet. Pump will be sized to be non-overloading throughout the full range of operation, and connected to an electric motor, sized as shown in the equipment schedule, through a flexible coupling surrounded by a metal coupling guard. Pump, motor and coupling will be mounted on a fabricated steel base and installed in accordance with pump manufacturers installation instructions. The contractor will ensure, during installation, that all pipe strain has been removed from the pump connections prior to start-up. Pump manufacturer’s representative will provide laser alignment of pump and motor at start-up and conform proper installation in accordance with installation instructions. Casing: The casing shall be cast iron (or as outlined in the equipment schedule) with casing halves divided on the horizontal axis machined, doweled and bolted together and provided with casing gasket between machined casing halves. Casing material will be cast iron Class A48 (or as shown in the equipment schedule) with minimum tensile strength of 35,000 PSI. Casing design will allow the removal of the entire rotating assembly by removing the upper half of the casing without disturbing suction and discharge piping connections. Casing shall be designed for scheduled working pressure and be hydrostatic tested at 1.5 times working pressure to ensure case integrity. Impeller: Shall be stainless steel, double suction design enclosed type, static and dynamic balanced and installed on the rotating shaft and held in place by impeller key and locked in position by shaft sleeves. Impeller and shaft will be supported by radial and axial load bearings installed on opposite sides of the impeller designed to support the static and hydraulic forces of the pump thought the entire range of operation. Shaft: Shall be high tensile steel designed to withstand static and hydraulic forces and sized for the appropriate horsepower and held in place by the pump bearings. Shaft Sleeves: Shall be 400 series stainless steel firmly attached to the pump shaft by locking means. Sleeves will be provided as standard product offering designed to prevent wear and tear and corrosion to the pump shaft. Bearings: Bearings shall be provided limiting shaft deflection to 0.001 inches at the mechanical seal and shall support the shaft and shaft loading over the full range of pump operation. Bearings shall be grease lubricated ball type bearings and locked to the shaft with positive locking devices sized to withstand axial and radial loads imposed under normal operation. Shaft Seals: Pump manufacturer shall provided the mechanical seal suitable for the use intended or as outlined in the equipment schedule. Mechanical seals shall be suitable for the fluid pumped, operating temperatures, working pressures and be provided with case mounted seal flush lines. Base, Coupling and guards: Pumps shall be mounted on fabricated steel baseplates and connected through a heavy duty flexible coupling to a horizontal motor sized as outlined in the equipment schedule. Pump manufacturer shall provide a coupling guard mounted between the pump and motor and firmly attached to the baseplate. Motor: The motor shall be sized to operate continuously without exceeding the horsepower rating as outlined in the equipment schedule. Motor enclosure, HP, voltage, RPM and efficiencies shall meet NEMA standards for premium efficient motors. Pump manufacturer will ensure motors used in variable speed applications are coordinated properly with variable speed drive manufacturer’s requirements for variable frequency operation.
General
Suggested Specifications: Type SC-II
Series SC-II Horizontal Split Case Pumps
Section View: Models: 1621 and 1624 Double Volute Design
Series 1
6
Item Part Name
25 Shaft
24 Lantern Ring
23 Packing
22 Packing Gland
21 Shaft Sleeve Nut
20 Slinger Ring
19 Bearing Liner
18 Coupling
17 Shaft Sleeve Nut
Item Part Name
16 Roller Bearing
15 Stuff Box Bushing
14 Seal Piping
13 Impeller
12 Case Wear Ring
11 Impeller Locating Sleeve
10 Casing Cover
9 Shaft Sleeve
8 Mechanical seal
Item Part Name
7 Seal Gland
6 Bearing Cover
5 Bearing
4 Bearing Cover Housing
3 Bearing Locknut
2 Bearing Housing
1 casing
Technical Product Information Section 7A.1
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
7
ITEM Cast Iron-Standard Fitted Ductile Iron-Standard Fitted Cast Iron-SS Fitted Ductile Iron-SS Fitted
Material Spec No Material Spec No Material Spec No Material Spec No
Casing Cast Iron A-48 Ductile Iron A-536 Cast Iron A-48 Ductile Iron A-536
Case Wear Rings Cast Iron A-48 Cast Iron A-48 Stainless 316 Stainless 316
Bearing Housing Cast Iron A-48 Cast Iron A-48 Cast Iron A-48 Cast Iron A-48
Casing Bolts Steel Grade-5 Steel Grade-5 Steel Grade-5 Steel Grade-5
Bearing Housing Gasket Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N
Case gasket Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401
Bear Housing Bolts Steel Grade-5 Steel Grade-5 Steel Grade-5 Steel Grade-5
Bearing cap Cast Iron A-48 Cast Iron A-48 Cast Iron A-48 Cast Iron A-48
Bearing cap Bolts Steel Grade-5 Steel Grade-5 Steel Grade-5 Steel Grade-5
Bearing cap gasket Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401
Impeller Cast Iron A-48 Stainless 304 Stainless 304 Stainless 304
Impeller Key Steel C1018 Steel C1018 Steel C1018 Steel C1018
Shaft Steel High Tensile Steel High Tensile Steel High Tensile Steel High Tensile
Shaft Sleeves Stainless 420 Stainless 420 Stainless 420 Stainless 420
Recirculation Lines Copper Tubing Com. Std
Copper Tubing Com. Std Stainless 304 Stainless 304
Recirculation Fittings Brass NPT Com. Std Brass NPT Com. Std Stainless 316 Stainless 316
Shaft "O" Rings Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N
Mech Seal Refer to
Chart Refer to Chart Refer to Chart Refer to Chart Refer to
Chart Refer to Chart Refer to
Chart Refer to Chart
General Information 1621 1625
Nominal Case Thickness (in) 0.90 0.80
Shaft Diam at Impeller-inches 4.33 4.72
Shaft Diam at Sleeve-inches 4.13 4.72
Shaft Diam at Coupling-inches 3.35 3.94
Sleeve OD-inches 4.72 5.51
Seal OD-inches Varies Varies
Minimum Bearing Life-Hrs. 17500 17500
Max Shaft Deflection at Seal 0.001 0.001
Volute Type (Single/Dual) Double Double
Pump Weight (Lbs.) 5952 6449
Bearing Center (inches) 45.197 48.976
Cutwater Diameter-inches 24.646 26.968
Casing Bolt Sizes (mm) M27 X 65-120 M30X80-260
Series SC-II Horizontal Split Case Pumps
Technical Data Models: 1621 and 1624 Double Volute Design
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Technical Product Information Section 7A.1
Series SC-II Horizontal Split Case Pumps
Section View: Models: 6024, 8020,8026,1024 & 1228 Double Volute Design
Series 2
8
Item Part Name
21 Shaft
20 Bearing Liner
19 Packing Gland
18 Packing
17 Seal Piping
16 Seal Housing
15 Lantern Ring
14 Case Wear Ring
13 Impeller
Item Part Name
12 Casing Cover
11 Stuff Box Bushing
10 Mechanical Seal
9 Seal Gland
8 Shaft Sleeve
7 Bearing Cover
6 Bearing Lock Ring
5 Lip Seal
4 Bearing Locknut
Item Part Name
3 Bearing
2 Bearing Housing
1 Casing
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Technical Product Information Section 7A.1
9
ITEM Cast Iron-Standard Fitted Ductile Iron-Standard Fitted Cast Iron-SS Fitted Ductile Iron-SS Fitted
Material Spec No Material Spec No Material Spec No Material Spec No
Casing Cast Iron A-48 Ductile Iron A-536 Cast Iron A-48 Ductile Iron A-536
Case Wear Rings Cast Iron A-48 Cast Iron A-48 Stainless 316 Stainless 316
Bearing Housing Cast Iron A-48 Cast Iron A-48 Cast Iron A-48 Cast Iron A-48
Casing Bolts Steel Grade-5 Steel Grade-5 Steel Grade-5 Steel Grade-5
Bearing Housing Gasket Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N
Case gasket Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401
Bear Housing Bolts Steel Grade-5 Steel Grade-5 Steel Grade-5 Steel Grade-5
Bearing cap Cast Iron A-48 Cast Iron A-48 Cast Iron A-48 Cast Iron A-48
Bearing cap Bolts Steel Grade-5 Steel Grade-5 Steel Grade-5 Steel Grade-5
Bearing cap gasket Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401 Veg Fiber HYD-401
Impeller Cast Iron A-48 Stainless 304 Stainless 304 Stainless 304
Impeller Key Steel C1018 Steel C1018 Steel C1018 Steel C1018
Shaft Steel High Tensile Steel High Tensile Steel High Tensile Steel High Tensile
Shaft Sleeves Stainless 420 Stainless 420 Stainless 420 Stainless 420
Recirculation Lines Copper Tubing Com. Std Copper Tubing Com. Std Stainless 304 Stainless 304
Recirculation Fittings Brass NPT Com. Std Brass NPT Com. Std Stainless 316 Stainless 316
Shaft "O" Rings Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N Synthetic Buna-N
Mech Seal Refer to Chart Refer to Chart Refer to Chart Refer to Chart Refer to
Chart Refer to Chart Refer to
Chart Refer to Chart
Series SC-II Horizontal Split Case Pumps
Technical Product Data
6024, 8020,8026,1024 & 1228
Double Volute Design
General Information (+/- .001) 6024 8020 8026 1024 1228
Nominal Case Thickness (in) 0.89 0.47 0.80 0.65 0.65
Shaft Diam at Impeller-inches 2.36 2.76 2.76 3.15 3.54
Shaft Diam at Sleeve-inches 2.36 2.76 2.76 3.15 3.54
Shaft Diam at Coupling-inches 2.21 2.56 2.56 2.95 3.35
Sleeve OD-inches 2.758 3.15 3.15 3.54 4.33
Seal OD-inches 9.653 10.63 10.63 11.02 12.40
Minimum Bearing Life-Hrs. 17500 17500 17500 17500 17500
Max Shaft Deflection at Seal (in) 0.001 0.001 0.001 0.001 0.001
Volute Type (Single/Dual) Double Double Double Double Double
Pump Weight (Lbs.) 2145 2778 3274 4019 5589
Bearing Center (inches) 25.8 29.93 29.93 34.15 38.86
Cutwater Diameter-inches 23.24 21.97 27.56 25.31 29.37
Casing Bolt Sizes (mm) M20X80 M20X80 M30X95 M24X95 M24X95
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Technical Product Information Section 7A.1
Series SC-II Horizontal Split Case Pumps
Section View: Models: 3080,3011,3014,4010,4012,4015,5009,5011,5014,5020,6011,6014,6018,8013,
8017,1015,1019,1212,1217,1222,1414,1417 & 1420 Series 3
10
Item Part Name
21 Shaft
20 Bearing Liner
19 Packing Gland
18 Packing
17 Seal Piping
16 Seal Housing
15 Lantern Ring
14 Case Wear Ring
13 Impeller
Item Part Name
12 Casing Cover
11 Stuff Box Bushing
10 Mechanical Seal
9 Seal Gland
8 Shaft Sleeve
7 Bearing Cover
6 Bearing Lock Ring
5 Lip Seal
4 Bearing Locknut
Item Part Name
3 Bearing
2 Bearing Housing
1 Casing
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Technical Product Information Section 7A.1
11
Series SC-II Horizontal Split Case Pumps
Technical Product Data
3080,3011,3014,4010,4012,4015,5009,5011,5015,5020,6011,6014,6018,8013, 8017,1015,1019,1212,1217,1222,1414,1417 & 1420
General Information (+/- .001) 3008 3011 3014 4010 4012 4015 5009 5011
Nominal Case Thickness (in) 0.40 0.40 0.40 0.47 0.47 0.40 0.40 0.50
Shaft Diam at Impeller-inches 1.57 1.57 1.57 1.57 1.57 1.57 1.97 1.97
Shaft Diam at Sleeve-inches 1.57 1.57 1.57 1.57 1.57 1.57 1.97 1.97
Shaft Diam at Coupling-inches 1.38 1.38 1.38 1.38 1.38 1.38 1.77 1.77
Sleeve OD-inches 1.97 1.97 1.97 1.97 1.97 1.97 2.36 2.36
Seal OD-inches 6.50 6.50 6.50 6.50 6.50 6.50 8.35 8.35
Minimum Bearing Life-Hrs. 17500 17500 17500 17500 17500 17500 17500 17500
Max Shaft Deflection at Seal 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
Volute Type (Single/Dual) Single Single Single Single Single Single Single Single
Pump Weight (Lbs.) 613 646 679 694 745 811 827 910
Bearing Center (inches) 21.43 21.27 21.27 21.27 21.27 21.27 23.07 23.07
Cutwater Diameter-inches 9.65 11.38 14.17 10.75 13.50 16.81 10.51 12.52
Casing Bolt Sizes (mm) M16X55 M16X55 M16X55 M16X55 M20X60 M16X55 M20X60 M20X60
General Information (+/- .001) 5015 5020 6011 6014 6018 8013 8017 1015
Nominal Case Thickness (in) 0.60 0.40 0.47 0.47 0.47 0.40 0.40 0.47
Shaft Diam at Impeller-inches 1.97 1.97 1.97 1.97 2.36 2.36 2.36 2.76
Shaft Diam at Sleeve-inches 1.97 1.97 1.97 1.97 2.36 2.36 2.36 2.76
Shaft Diam at Coupling-inches 1.77 1.77 1.77 1.77 2.17 2.17 2.17 2.56
Sleeve OD-inches 2.36 2.36 2.36 2.36 2.76 2.76 2.76 3.15
Seal OD-inches 8.35 8.35 8.35 8.35 9.65 9.65 9.65 10.63
Minimum Bearing Life-Hrs. 17500 17500 17500 17500 17500 17500 17500 17500
Max Shaft Deflection at Seal 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
Volute Type (Single/Dual) Single Single Single Single Single Single Single Single
Pump Weight (Lbs.) 992 1109 1149 1188 1442 1488 1711 2200
Bearing Center (inches) 23.07 23.07 23.07 23.07 25.79 25.79 25.79 29.93
Cutwater Diameter-inches 15.94 19.61 12.56 14.88 18.54 14.53 17.72 16.54
Casing Bolt Sizes (mm) M20X60 M20X60 M20X60 M20X60 M20X80 M20X80 M24X75 M20X70
General Information (+/- .001) 1019 1212 1217 1414 1417 1420
Nominal Case Thickness (in) 0.60 0.65 0.65 0.55 0.55 0.60
Shaft Diam at Impeller-inches 3.15 2.76 3.15 3.15 3.54 3.54
Shaft Diam at Sleeve-inches 3.15 2.76 3.15 3.15 3.54 3.54
Shaft Diam at Coupling-inches 2.95 2.56 2.95 2.95 3.35 3.35
Sleeve OD-inches 3.54 3.15 3.54 3.54 4.33 4.33
Seal OD-inches 11.02 10.63 11.02 11.02 12.40 12.40
Minimum Bearing Life-Hrs. 17500 17500 17500 17500 17500 17500
Max Shaft Deflection at Seal 0.001 0.001 0.001 0.001 0.001 0.001
Volute Type (Single/Dual) Single Single Single Single Single Single
Pump Weight (Lbs.) 2745 2083 2994 2862 4250 4614
Bearing Center (inches) 34.15 29.93 34.15 34.15 38.86 38.858
Cutwater Diameter-inches 20.31 16.06 19.37 17.76 20.87 22.047
Casing Bolt Sizes (mm) M24X95 M24X85 M24X85 M20X90 M24X95 M24 X 95
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Technical Product Information Section 7A.4
12
Section: 7A.2 Performance Curves-1750 RPM
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
13
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal 1144 Utica Avenue, Brooklyn, NY 11203
Federal Pump Corp. Model No: 3085 Cutwater: 9.65" Size: 3"X5"X8.5 " Impeller No: A-3080-1 Type: SC-II Casing No: B-3080-1 RPM: 1750 Release Date: 3/1/2014
6.7” 7.3”
8.0”
8.5”
6.7”
8.5”
6.7”
7.3”
8.0”
8.5”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
14
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 3011 Cutwater: 11.4" Size: 3"X5"X11 " Impeller No: A-3011-1 Type: SC-II Casing No: B-3011-1 RPM: 1750 Release Date: 3/1/2014
8.5”
9.3”
10”
10.8”
8.5”
10.8”
8.5”
9.3”
10”
10.8”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
15
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 3014 Cutwater: 14.2" Size: 3"X5"X14 " Impeller No: A-3014-1 Type: SC-II Casing No: B-3014-1 RPM: 1750 Release Date: 3/1/2014
13.6”
12.6”
11.8”
10.6”
13.6”
10.6”
13.6”
12.6”
11.8”
10.6”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
16
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 4010 Cutwater: 10.75" Size: 4"X6"X10 " Impeller No: A-4010-1 Type: SC –II Casing No: B-4010-1 RPM: 1750 Release Date: 3/1/2014
10”
9.3”
8.6”
8.0”
10”
8.0”
10”
9.3”
8.6”
8.0”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
17
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 4012 Cutwater: 13.5" Size: 4"X6"X12" Impeller No: A-4012-1 Type: SC-II Casing No: B-4012-1 RPM: 1750 Release Date: 3/1/2014
10”
11”
12”
12.8”
10”
10”
12.8”
10”
11”
12”
12.8”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
18
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 4015 Cutwater: 16.8" Size: 4"X6"X15 " Impeller No: A-4015-1 Type: SC Casing No: B-4015-1 RPM: 1750 Release Date: 3/1/2014
16”
15”
14”
12.8”
16”
12.8”
12.8”
14”
15”
16”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
19
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 5009 Cutwater: 10.5" Size: 5"X8"X9" Impeller No: A-5008-1 Type: SC-II Casing No: B-5008-1 RPM: 1750 Release Date: 3/1/2014
9.6”
9”
8.3”
7.6”
9.6”
9”
8.3”
7.6”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
20
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 5011 Cutwater: 12.5 Size: 5"X8"X11 Impeller No: A-5011-1 Type: SC-II Casing No: B-5011-1 RPM: 1750 Release Date: 3/1/2014
11.9”
10.9
10”
9.1”
9.1”
10”
10.9”
11.9”
11.9”
9.1”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
21
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 5015 Cutwater: 15.9 Size: 5"X8"X15 Impeller No: A-5015-1 Type: SC-II Casing No: B-5015-1 RPM: 1750 Release Date: 3/1/2014
15.1”
13.9”
12.6”
11.4”
11.4”
11.4”
15.1”
15.1”
13.9”
12.6”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
22
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 5020 Cutwater: 19.6 Size: 5"X8"X20 Impeller No: A-5020-1 Type: SC-II Casing No: B-5020-1 RPM: 1750 Release Date: 3/1/2014
18.7”
17.8”
16.2”
15”
18.7”
18.7”
17.8”
16.2”
15”
15”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
23
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 6011 Cutwater: 12.6 Size: 6"X8"X11 Impeller No: A-6011-1 Type: SC Casing No: B-6011-1 RPM: 1750 Release Date: 3/1/2014
11.3”
10.6”
9.8”
8.9”
11.3”
11.3”
8.9”
8.9”
10.6”
9.8”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
24
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 6014 Cutwater: 14.9 Size: 6"X8"X14 Impeller No: A-6014-1 Type: SC-II Casing No: B-6014-1 RPM: 1750 Release Date: 3/1/2014
14”
14”
10.8”
10.8”
12.8”
11.8”
14”
12.8”
11.8”
10.8”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
25
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 6018 Cutwater: 18.5 Size: 6"X8"X18 Impeller No: A-6018-1 Type: SC-II Casing No: B-6018-1 RPM: 1750 Release Date: 3/1/2014
18”
13.4”
16.4”
15”
18”
16.4”
15”
13.4”
18” 13.4”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
26
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 6024 Cutwater: 24.1 Size: 6"X8"X 24" Impeller No: A-6024-1 Type: SC-II Casing No: B-6024-1 RPM: 1750 Release Date: 3/1/2014
22”
20.1”
19.1”
17.7”
22”
22”
17.7”
20.1”
19.1”
17.7”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
27
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 8013 Cutwater: 14.5 Size: 8"X 10"X 13" Impeller No: A-8013-1 Type: SC-II Casing No: B-8013-1 RPM: 1750 Release Date: 3/1/2014
13.3”
12.4” 11.4”
10.5”
10.5”
10.5”
11.4”
12.4”
13.3”
13.3”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
28
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 8017 Cutwater: 17.7 Size: 8"X 10"X 17" Impeller No: A-8017-1 Type: SC-II Casing No: B-8017-1 RPM: 1750 Release Date: 3/1/2014
16.3”
12.6”
15”
13.8”
12.6”
12.6”
16.3”
16.3”
15”
13.8”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
29
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 8020 Cutwater: 22.0” Size: 8"X 10"X 20" Impeller No: A-8020-1 Type: SC-II Casing No: B-8020-1 RPM: 1750 Release Date: 3/1/2014
20.1”
19.1”
17.4”
15.7”
20.1”
15.7”
20.1”
19.1”
17.4”
15.7”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
30
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 8026 Cutwater: 27.5 Size: 8"X 10"X 26" Impeller No: A-8026-1 Type: SC Casing No: B-8026-1 RPM: 1750 Release Date: 3/1/2014
25.8”
24”
22.4”
20.7”
25.8”
20.7”
25.8”
20.7”
22.4”
24”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
31
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1015 Cutwater: 16.5 Size: 10"X 12"X 15" Impeller No: A-1015-1 Type: SC-II Casing No: B-1015-1 RPM: 1750 Release Date: 3/1/2014
15.3”
15.3”
14.3”
13.2”
12”
12”
15.3”
12”
13.2”
14.3”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
32
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1019 Cutwater: 20.3” Size: 10"X 12"X 19" Impeller No: A-1019-1 Type: SC-II Casing No: B-1019-1 RPM: 1750 Release Date: 3/1/2014
18.8”
18.8”
17.3”
15.9”
14.5”
14.5”
18.8”
14.5”
15.9”
17.3”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
33
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1024 Cutwater: 25.3 Size: 10"X 12"X 24" Impeller No: A-1024-1 Type: SC Casing No: B-1024-1 RPM: 1750 Release Date: 3/1/2014
18.7”
24”
22.4”
20.5”
18.7”
20.5”
22.4”
24”
24” 18.7”
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
34
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1214 Cutwater: 16.0 Size: 12"X 12"X 14" Impeller No: A-1214-1 Type: SC Casing No: B-1214-1 RPM: 1750 Release Date: 3/1/2014
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
13”
10.8”
12.1”
11.3”
13”
10.8”
13”
10.8”
11.3”
12.1”
35
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1217 Cutwater: 19.3 Size: 12"X 14"X 17" Impeller No: A-1217-1 Type: SC Casing No: B-1217-1 RPM: 1750 Release Date: 3/1/2014
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
17.7”
14”
16.5”
15.2”
17.7”
16.5”
15.2”
14”
14” 17.7”
36
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1222 Cutwater: 23.4 Size: 12"X 16"X 22" Impeller No: A-1222-1 Type: SC Casing No: B-1222-1 RPM: 1750 Release Date: 3/1/2014
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
21.8”
16.8”
20”
18.3”
16.8”
21.8”
16.8”
21.8”
18.3”
20”
37
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1228 Cutwater: 29.3 Size: 12"X 16"X 28" Impeller No: A-1228-1 Type: SC Casing No: B-1228-1 RPM: 1750 Release Date: 3/1/2014
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
27.8”
25.6”
23.6”
21.7”
21.7”
25.6”
27.8”
21.7”
23.6”
25.6”
27.8”
38
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1416 Cutwater: 17.9 Size: 14"X 16"X 14" Impeller No: A-1416-1 Type: SC Casing No: B-1416-1 RPM: 1750 Release Date: 3/1/2014
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
15”
12.5”
14” 13”
12.5” 15”
15”
12.5”
13”
14”
39
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.2 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
Federal Pump Corp Model No: 1417 Cutwater: 20.9 Size: 14"X 16"X 17" Impeller No: A-1417-1 Type: SC Casing No: B-1417-1 RPM: 1750 Release Date: 3/1/2014
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
17.3”
14.4”
16.2”
15”
17.3” 14.4”
17.3”
14.4”
15”
16.2”
40
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.3 Series SC-II Dimensional Data Horizontal Split Case Centrifugal
Section: 7A.3 Dimensions
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
41
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.3 Series SC-II Dimensional Data Horizontal Split Case Centrifugal
Clockwise Rotation
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
3.0 182T 5 3 18.10 39 20.10 4 4 15.60
5.0 184T 5 3 18.10 40 20.10 4 4 16.03
3008 7.5 215T 5 3 18.10 42 20.10 4 4 17.21
10.0 215T 5 3 18.10 44 20.10 4 4 17.89
15.0 254T 5 3 18.10 46 20.10 4 4 19.08
5.0 184T 5 3 18.10 40 20.10 4 4 16.03
7.5 215T 5 3 18.10 42 20.10 4 4 17.21
10.0 215T 5 3 18.10 44 20.10 4 4 17.89
3011 15.0 254T 5 3 18.10 46 20.10 4 4 19.08
20.0 256T 5 3 18.10 48 20.10 4 4 19.83
25.0 284T 5 3 18.10 49 20.10 4 4 20.50
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs.)
3.0 182T 10.90 10.90 17.45 11.82 11.82 27.64 31 15.11 6.30 330
5.0 184T 10.90 10.90 17.45 11.82 11.82 27.64 31 16.12 6.30 345
3008 7.5 215T 10.90 10.90 17.45 11.82 11.82 27.64 31 18.89 6.30 400
10.0 215T 10.90 10.90 17.45 11.82 11.82 27.64 31 20.49 6.30 420
15.0 254T 10.90 10.90 17.45 11.82 11.82 27.64 31 23.29 6.30 485
5.0 184T 10.90 10.90 17.45 11.82 11.82 27.64 31 16.12 6.30 425
7.5 215T 10.90 10.90 17.45 11.82 11.82 27.64 31 18.89 6.30 450
10.0 215T 10.90 10.90 17.45 11.82 11.82 27.64 31 20.49 6.30 575
3011 15.0 254T 10.90 10.90 17.45 11.82 11.82 27.64 31 23.29 6.30 640
20.0 256T 10.90 10.90 17.45 11.82 11.82 27.64 31 25.06 6.30 690
25.0 284T 10.90 10.90 17.45 11.82 11.82 27.64 31 26.63 6.30 770
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Suction Flange Rating: _________ Discharge Flange Rating: _________
42
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.3 Series SC-II Dimensional Data Horizontal Split Case Centrifugal
Clockwise Rotation
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
15.0 254T 5 3 18.10 46 20.10 4 4 19.08
20.0 256T 5 3 18.10 48 20.10 4 4 19.83
3014 25.0 284T 5 3 18.10 49 20.10 4 4 20.50
30.0 286T 5 3 18.10 50 20.10 4 4 21.16
40.0 324T 5 3 18.10 52 20.10 4 4 21.91
50.0 326T 5 3 18.10 53 20.10 4 4 22.45
5.0 184T 6 4 20.50 40 22.50 4 4 16.03
7.5 215T 6 4 20.50 42 22.50 4 4 17.21
4010 10.0 215T 6 4 20.50 44 22.50 4 4 17.89
15.0 254T 6 4 20.50 46 22.50 4 4 19.08
20.0 256T 6 4 20.50 48 22.50 4 4 19.83
25.0 284T 6 4 20.50 49 22.50 4 4 20.50
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
15.0 254T 10.90 10.90 17.45 13.00 13.00 28.43 31 23.29 6.30 670
20.0 256T 10.90 10.90 17.45 13.00 13.00 28.43 31 25.06 6.30 700
3014 25.0 284T 10.90 10.90 17.45 13.00 13.00 28.43 31 26.63 6.30 800
30.0 286T 10.90 10.90 17.45 13.00 13.00 28.43 31 28.18 6.30 860
40.0 324T 10.90 10.90 17.45 13.00 13.00 28.43 31 29.95 6.30 1000
50.0 326T 10.90 10.90 17.45 13.00 13.00 28.43 31 31.24 6.30 1175
5.0 184T 11.29 11.29 17.45 13.00 13.00 28.82 31 16.12 6.30 971
7.5 215T 11.29 11.29 17.45 13.00 13.00 28.82 31 18.89 6.30 998
4010 10.0 215T 11.29 11.29 17.45 13.00 13.00 28.82 31 20.49 6.30 1012
15.0 254T 11.29 11.29 17.45 13.00 13.00 28.82 31 23.29 6.30 1145
20.0 256T 11.29 11.29 17.45 13.00 13.00 28.82 31 25.06 6.30 1195
25.0 284T 11.29 11.29 17.45 13.00 13.00 28.82 31 26.63 6.30 1285
Suction Flange Rating: _________ Discharge Flange Rating: _________
43
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
3.0 182T 5 3 18.10 39 20.10 4 4 15.60
10.0 215T 6 4 20.50 44 22.50 4 4 17.89
15.0 254T 6 4 20.50 46 22.50 4 4 19.08
20.0 256T 6 4 20.50 48 22.50 4 4 19.83
4012 25.0 284T 6 4 20.50 49 22.50 4 4 20.50
30.0 286T 6 4 20.50 50 22.50 4 4 21.16
40.0 324T 6 4 20.50 52 22.50 4 4 21.91
50.0 326T 6 4 20.50 53 22.50 4 4 22.45
30.0 286T 6 4 20.50 50 22.50 4 4 21.16
4015 40.0 324T 6 4 20.50 52 22.50 4 4 21.91
50.0 326T 6 4 20.50 53 22.50 4 4 22.45
60.0 364T 6 4 20.50 54 22.50 4 4 23.02
75.0 365T 6 4 20.50 55 22.50 4 4 23.68
100.0 404TS 6 4 20.50 55 22.50 6 4 23.33
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
3.0 182T 10.90 10.90 17.45 11.82 11.82 27.64 31 15.11 6.30 330
10.0 215T 11.29 11.29 17.45 13.00 13.00 30.40 31 20.49 6.30 1057
15.0 254T 11.29 11.29 17.45 13.00 13.00 30.40 31 23.29 6.30 1187
20.0 256T 11.29 11.29 17.45 13.00 13.00 30.40 31 25.06 6.30 1235
4012 25.0 284T 11.29 11.29 17.45 13.00 13.00 30.40 31 26.63 6.30 1325
30.0 286T 11.29 11.29 17.45 13.00 13.00 30.40 31 28.18 6.30 2025
40.0 324T 11.29 11.29 17.45 13.00 13.00 30.40 31 29.95 6.30 2135
50.0 326T 11.29 11.29 17.45 13.00 13.00 30.40 31 31.24 6.30 2160
30.0 286T 11.29 11.29 17.45 14.58 14.58 31.38 31 28.18 6.30 1472
4015 40.0 324T 11.29 11.29 17.45 14.58 14.58 31.38 31 29.95 6.30 1562
50.0 326T 11.29 11.29 17.45 14.58 14.58 31.38 31 31.24 6.30 1590
60.0 364T 11.29 11.29 17.45 14.58 14.58 31.38 31 32.58 6.30 1940
75.0 365T 11.29 11.29 17.45 14.58 14.58 31.38 31 34.11 6.30 2140
100.0 404TS 13.29 13.29 17.45 14.58 14.58 33.38 31 33.31 6.30 2440
Clockwise Rotation
Suction Flange Rating: _________ Discharge Flange Rating: _________
44
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
10.0 215T 8 5 22.90 47 24.90 4 4 19.61
15.0 254T 8 5 22.90 50 24.90 4 4 20.80
5009 20.0 256T 8 5 22.90 51 24.90 4 4 21.55
25.0 284T 8 5 22.90 52 24.90 4 4 22.22
30.0 286T 8 5 22.90 54 24.90 4 4 22.88
40.0 324T 8 5 22.90 55 24.90 4 4 23.63
20.0 256T 8 5 22.90 51 24.90 4 4 21.55
25.0 284T 8 5 22.90 52 24.90 4 4 22.22
30.0 286T 8 5 22.90 54 24.90 4 4 22.88
5011 40.0 324T 8 5 22.90 55 24.90 4 4 23.63
50.0 326T 8 5 22.90 56 24.90 4 4 24.18
60.0 364T 8 5 22.90 57 24.90 4 4 24.75
75.0 365T 8 5 22.90 59 24.90 4 4 25.40
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
10.0 215T 11.88 11.88 20.39 14.58 14.58 32.37 35 20.49 7.68 1220
15.0 254T 11.88 11.88 20.39 14.58 14.58 32.37 35 23.29 7.68 1274
5009 20.0 256T 11.88 11.88 20.39 14.58 14.58 32.37 35 25.06 7.68 1324
25.0 284T 11.88 11.88 20.39 14.58 14.58 32.37 35 26.63 7.68 1414
30.0 286T 11.88 11.88 20.39 14.58 14.58 32.37 35 28.18 7.68 1504
40.0 324T 11.88 11.88 20.39 14.58 14.58 32.37 35 29.95 7.68 1654
20.0 256T 11.88 11.88 20.39 14.58 14.58 31.78 35 25.06 7.68 1440
25.0 284T 11.88 11.88 20.39 14.58 14.58 31.78 35 26.63 7.68 1510
30.0 286T 11.88 11.88 20.39 14.58 14.58 31.78 35 28.18 7.68 1600
5011 40.0 324T 11.88 11.88 20.39 14.58 14.58 31.78 35 29.95 7.68 1740
50.0 326T 11.88 11.88 20.39 14.58 14.58 31.78 35 31.24 7.68 1770
60.0 364T 11.88 11.88 20.39 14.58 14.58 31.78 35 32.58 7.68 2120
75.0 365T 11.88 11.88 20.39 14.58 14.58 31.78 35 34.11 7.68 2250
Clockwise Rotation
Suction Flange Rating: _________ Discharge Flange Rating: _________
45
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
40.0 324T 8 5 22.90 55 24.90 4 4 23.63
50.0 326T 8 5 22.90 56 24.90 4 4 24.18
60.0 364T 8 5 22.90 57 24.90 4 4 24.75
5015 75.0 365TS 8 5 22.90 56 24.90 4 4 23.84
100.0 404TS 8 5 23.90 59 26.90 6 4 25.27
125.0 405TS 8 5 23.90 60 26.90 6 4 25.93
150.0 444TS 8 5 23.90 63 27.90 6 4 27.45
100.0 404TS 8 5 27.80 59 30.80 6 4 25.27
5020 125.0 405TS 8 5 27.80 60 30.80 6 4 25.93
150.0 444TS 8 5 27.80 63 30.80 6 4 27.45
200.0 445TS 8 5 28.80 64 31.80 6 5 27.20
250.0 445TS 8 5 29.80 64 32.80 6 6 26.20
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs.)
40.0 324T 11.88 11.88 20.39 14.58 14.58 33.55 35 29.95 7.68 1835
50.0 326T 11.88 11.88 20.39 14.58 14.58 33.55 35 31.24 7.68 1865
60.0 364T 11.88 11.88 20.39 14.58 14.58 33.55 35 32.58 7.68 2165
5015 75.0 365TS 11.88 11.88 20.39 14.58 14.58 33.55 35 30.45 7.68 2315
100.0 404TS 13.88 13.88 20.39 14.58 14.58 35.55 35 33.81 7.68 2605
125.0 405TS 13.88 13.88 20.39 14.58 14.58 35.55 35 35.35 7.68 2800
150.0 444TS 13.88 13.88 20.39 14.58 14.58 35.55 35 38.94 7.68 3240
100.0 404TS 13.88 13.88 20.39 17.73 17.73 36.93 35 33.81 7.68 2675
5020 125.0 405TS 13.88 13.88 20.39 17.73 17.73 36.93 35 35.35 7.68 2750
150.0 444TS 13.88 13.88 20.39 17.73 17.73 36.93 35 38.94 7.68 3180
200.0 445TS 13.88 13.88 20.39 17.73 17.73 36.93 35 40.71 7.68 3540
250.0 445TS 13.88 13.88 20.39 17.73 17.73 36.93 35 40.71 7.68 3750
Clockwise Rotation
Suction Flange Rating: _________ Discharge Flange Rating: _________
46
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
30.0 286T 8 6 22.90 54 24.90 4 4 22.88
40.0 324T 8 6 22.90 55 24.90 4 4 23.63
6011 50.0 326T 8 6 22.90 56 24.90 4 4 24.18
60.0 364T 8 6 22.90 57 24.90 4 4 24.75
75.0 365TS 8 6 23.90 56 25.90 4 5 22.84
100.0 404TS 8 6 24.90 59 26.90 6 6 23.27
30.0 286T 8 6 22.90 51 25 4 4 22.67
40.0 342T 8 6 22.90 52 25 4 4 22.67
50.0 326T 8 6 22.90 53 25 4 4 22.67
60.0 364TS 8 6 22.90 54 25 4 4 23.24
6014 75.0 365TS 8 6 22.90 53 25 4 4 22.34
100.0 404TS 8 6 23.90 56 27 6 4 23.77
125.0 405TS 8 6 23.90 57 27 6 4 24.42
150.0 444TS 8 6 23.90 60 27 6 4 24.42
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
30.0 286T 11.88 11.88 20.39 15.76 15.76 34.54 35 28.18 7.88 1906
40.0 324T 11.88 11.88 20.39 15.76 15.76 34.54 35 29.95 7.88 2030
6011 50.0 326T 11.88 11.88 20.39 15.76 15.76 34.54 35 31.24 7.88 2060
60.0 364T 11.88 11.88 20.39 15.76 15.76 34.54 35 32.58 7.88 2435
75.0 365TS 11.88 11.88 20.39 15.76 15.76 34.535 35 30.45 7.88 2510
100.0 404TS 13.88 13.88 20.39 15.76 15.76 36.535 35 33.81 7.88 2725
30.0 286T 11.88 11.88 20.39 15.76 15.76 33.75 31.52 28.18 7.68 2070
40.0 342T 11.88 11.88 20.39 15.76 15.76 33.75 31.52 29.95 7.68 2210
50.0 326T 11.88 11.88 20.39 15.76 15.76 33.75 31.52 31.24 7.68 2270
60.0 364TS 11.88 11.88 20.39 15.76 15.76 33.75 31.52 32.58 7.68 2700
6014 75.0 365TS 11.88 11.88 20.39 15.76 15.76 33.75 31.52 30.45 7.68 2800
100.0 404TS 13.88 13.88 20.39 15.76 15.76 35.75 31.52 33.81 7.68 3050
125.0 405TS 13.88 13.88 20.39 15.76 15.76 35.75 31.52 35.35 7.68 3160
150.0 444TS 13.88 13.88 20.39 15.76 15.76 35.75 31.52 38.94 7.68 3570
Clockwise Rotation
Suction Flange Rating: _________ Discharge Flange Rating: _________
47
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
60.0 364TS 8 6 26.80 55 29 4 4 24.01
75.0 365TS 8 6 26.80 56 29 4 4 24.01
6018 100.0 404TS 8 6 27.80 59 31 6 4 25.44
125.0 405TS 8 6 27.80 60 31 6 4 26.10
150.0 444TS 8 6 27.80 63 31 6 4 27.62
200.0 445TS 8 6 27.80 65 31 6 4 28.37
250.0 445TS 8 6 27.80 65 31 6 4 28.37
300.0 445TS 8 6 33.30 71 36 6 4 31.72
60.0 364TS 10 8 26.80 55 29 4 4 24.01
75.0 365TS 10 8 26.80 56 29 4 4 24.01
8013 100.0 404TS 10 8 27.80 59 31 6 4 25.44
125.0 405TS 10 8 27.80 60 31 6 4 26.10
150.0 444TS 10 8 27.80 63 31 6 4 27.62
200.0 445TS 10 8 27.80 65 31 6 4 28.37
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
60.0 364TS 11.88 11.88 23.32 17.73 17.73 35.52 35.46 29.45 9.5 3000
75.0 365TS 11.88 11.88 23.32 17.73 17.73 35.52 35.46 30.45 9.5 3120
6018 100.0 404TS 13.88 13.88 23.32 17.73 17.73 37.52 35.46 33.81 9.5 3360
125.0 405TS 13.88 13.88 23.32 17.73 17.73 37.52 35.46 35.35 9.5 3460
150.0 444TS 13.88 13.88 23.32 17.73 17.73 37.52 35.46 38.94 9.5 3870
200.0 445TS 13.88 13.88 23.32 17.73 17.73 37.52 35.46 40.71 9.5 4270
250.0 445TS 13.88 13.88 23.32 17.73 17.73 37.52 35.46 40.71 9.5 4480
300.0 445TS 13.88 13.88 23.32 19.7 23.64 43.43 43.34 40.71 9.5 5880
60.0 364TS 14.24 14.24 23.32 17.73 17.73 37.49 35.46 29.45 9.5 3000
75.0 365TS 14.24 14.24 23.32 17.73 17.73 37.49 35.46 30.45 9.5 3100
8013 100.0 404TS 16.24 16.24 23.32 17.73 17.73 39.49 35.46 33.81 9.5 3350
125.0 405TS 16.24 16.24 23.32 17.73 17.73 39.49 35.46 35.35 9.5 3460
150.0 444TS 16.24 16.24 23.32 17.73 17.73 39.49 35.46 38.94 9.5 3870
200.0 445TS 16.24 16.24 23.32 17.73 17.73 39.49 35.46 40.71 9.5 4270
Suction Flange Rating: _________ Discharge Flange Rating: _________
Clockwise Rotation
48
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
100.0 404TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 36.94 9.5 3575
125.0 405TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 37.94 9.5 3685
150.0 444TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 38.94 9.5 4085
8017 200.0 445TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 40.71 9.5 4485
250.0 445TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 40.71 9.5 4695
300.0 445TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 40.71 9.5 6100
350.0 447TS 16.24 16.24 25.81 19.7 23.64 41.07 43.34 41.71 9.5 6700
125.0 405TS 17.82 17.82 25.81 19.7 19.7 45.40 39.4 37.94 9.5 4185
150.0 444TS 17.82 17.82 25.81 19.7 19.7 45.40 39.4 38.94 9.5 4585
200.0 445TS 17.82 17.82 25.81 19.7 19.7 45.40 39.4 40.71 9.5 4985
250.0 445TS 17.82 17.82 25.81 19.7 19.7 45.40 39.4 40.71 9.5 5195
1015 300.0 445TS 17.82 17.82 25.81 19.7 19.7 45.40 39.4 40.71 9.5 6395
350.0 447TS 17.82 17.82 25.81 19.7 19.7 45.40 39.4 41.71 9.5 6875
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
100.0 404TS 10 8 33.30 68 36 6 4 31.72
125.0 405TS 10 8 33.30 69 36 6 4 31.72
150.0 444TS 10 8 33.30 70 36 6 4 31.72
8017 200.0 445TS 10 8 33.30 71 36 6 4 31.72
250.0 445TS 10 8 33.30 71 36 6 4 31.72
300.0 445TS 10 8 33.30 71 36 6 4 31.72
350.0 447TS 10 8 33.30 72 36 6 4 31.72
125.0 405TS 12 10 34.52 66 38 6 4 29.29
150.0 444TS 12 10 34.52 67 38 6 4 29.29
200.0 445TS 12 10 34.52 68 38 6 4 30.05
250.0 445TS 12 10 34.52 68 38 6 4 30.05
1015 300.0 445TS 12 10 34.52 68 38 6 4 30.05
350.0 447TS 12 10 34.52 69 38 6 4 30.05
Suction Flange Rating: _________ Discharge Flange Rating: _________
Clockwise Rotation
49
1144 Utica Avenue, Brooklyn, NY 11203
Section: 7A.1 Series SC-II Performance Curves-1750 RPM Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
Pump/Motor Selection HS HD W X YY HZ CP C HY Weight
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (Lbs)
100.0 404TS 19.00 19.00 25.81 19.7 21.67 48.95 44.40 33.81 9.46 3825
125.0 405TS 19.00 19.00 25.81 19.7 21.67 48.95 44.40 35.35 9.46 3985
1212 150.0 444TS 19.00 19.00 25.81 19.7 21.67 48.95 44.40 38.94 9.46 4385
200.0 445TS 19.00 19.00 25.81 19.7 21.67 48.95 44.40 40.71 9.46 4785
250.0 445TS 19.00 19.00 25.81 19.7 21.67 48.95 44.40 40.71 9.46 4990
200.0 445TS 18.61 18.61 28.80 21.67 25.61 51.70 49.45 39.71 11.82 5585
250.0 445TS 18.61 18.61 28.80 21.67 25.61 51.70 49.45 40.71 11.82 5890
1414 300.0 445TS 18.61 18.61 28.80 21.67 25.61 51.70 49.45 40.71 11.82 6690
350.0 447TS 18.61 18.61 28.80 21.67 25.61 51.70 49.45 44.25 11.82 RTF
400.0 449TS 20.61 20.61 28.80 21.67 25.61 53.70 49.45 44.25 11.82 RTF
450.0 449TS 20.61 20.61 28.80 21.67 25.61 53.70 49.45 51.29 11.82 RTF
Pump/Motor Selection Suction Discharge HA2 HB HE HG HP1 HP3
Model HP Frame (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch)
100.0 404TS 14 12 34.50 66 37.5 6 4 29.24
125.0 405TS 14 12 34.50 68 37.5 6 4 29.90
1212 150.0 444TS 14 12 34.50 71 37.5 6 4 31.42
200.0 445TS 14 12 34.50 72 37.5 6 4 32.17
250.0 445TS 14 12 34.50 72 37.5 6 4 32.17
200.0 445TS 16 14 34.50 76 37.5 6 4 34.32
250.0 445TS 16 14 34.50 77 37.5 6 4 34.32
1414 300.0 445TS 16 14 34.50 77 37.5 6 4 34.32
350.0 447TS 16 14 34.50 80 37.5 6 4 35.82
400.0 449TS 16 14 35.50 80 39.5 8 4 35.82
450.0 449TS 16 14 35.50 86 39.5 8 4 38.81
Clockwise Rotation
Suction Flange Rating: _________ Discharge Flange Rating: _________
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 50
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 51
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 52
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 53
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
54
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 55
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 56
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 57
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 58
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 59
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 60
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14 61
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
62
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
63
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
64
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
65
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
66
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
67
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
68
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal
FEDERAL PUMP PRODUCT REVISION 1 8.20.14
69
Section: 7A.4 Series SC-II Operations Manual Horizontal Split Case Centrifugal