series: schlumberger schlumberger proven meters with ... · tangent crank meter type...
TRANSCRIPT
Meter Classification
MAOP
Weight
Index Drive
Tangent Crank
Meter Type
Hub-Center-to-Center
Hub Sizes
Index Type
Sealing
Badge Information
Adjustment Information
Surface Treatment
Packaging
When you combine all of the “A” Series’
customer-driven features with Schlumberger’s
tradition for highly accurate meters and good
value, it is easy to see why these outstanding
meters should have a place in your
measurement operation.
“A”-Series Commercial Diaphragm Meter
Designed by the experts –
the people who use them
Schlumberger Schlumberger
chlumberger is a world-class
name in the energy industry.
With 50,000 people in more than 100
countries, we are a leader in activities
from oil and gas exploration and
extraction, to metering technology
for water, gas and electricity.
Schlumberger has a reputation for
strength, innovation and commitment
to service.
Schlumberger is the world’s largest
supplier of gas meters, water meters,
electricity meters, and automatic meter
reading technology. As the only
company active in all three utility
industries, our success is based on our
experience and expertise in supplying
new technology to meet the changing
needs of the utility industry, anywhere
and everywhere in the world.
With annual revenue in excess
of $10.5 billion, supported by annual
research and development investments
exceeding $400 million, Schlumberger
stands alone in our strength and
commitment to the utility systems
and services industry.
S
Setting the standard foradvanced measurement systems.
© Copyright 1998. All rights reserved. GD-1527
Flow Rate
Diff
eren
tial "
WC
Schlumberger Gas Division Headquarters970 Highway 127 NorthOwenton, KY 40359-0657Tel: (502) 484-5747Fax: (502) 484-6223Customer Service: (800) 490-0657
Measurement Division Canada7275 West Credit AvenueMississauga, Ontario L5N 5M9Tel: (905) 858-4211Fax: (905) 858-0428Customer Service: (800) 363-7886
400A
10 or 25 psig(69 or 172 kPa)
Standard top:12.3 lb (5.6 kg)
Wide Connectiontop: 13 lb (5.9 kg)
2 ft3/rev (10 dm3/rev)
9 rev/ft3
(3.2 rev/dm3)
625⁄32” or 81⁄4”
#4 SpragueStandard
20LT, 30LT, 45LT
4 circle dial (ft3)• Standard 7”, 14”, 2psig
4 digit direct read (ft3)
5 digit direct read (ft3 or m3)
7 digit direct read (m3)
Single pack24 per skid
675A
25 psig (172 kPa)
all models: 43 lb(19.5 kg)
10 ft3/rev (50 dm3/rev)
all models: 1.8 rev/ft3
(5.1 rev/dm3)
10”
#4 SpragueStandard
30LT, 45LT
800A
25 psig (172 kPa)
all models: 43 lb(19.5 kg)
10 ft3/rev (50 dm3/rev)
all models: 1.8 rev/ft3
(5.1 rev/dm3)
11”
#5 SpragueStandard
30LT, 45LT, 60LT, 100LT
5 circle dial (ft3)• Standard 7”, 14”
5 digit direct read (ft3)
6 digit direct read (m3)
7 digit direct read (m3)
Single Pack12 per skid
1000A
25 psig (172 kPa)
all models: 43 lb(19.5 kg)
10 ft3/rev (50 dm3/rev)
all models: 1.8 rev/ft3
(5.1 rev/dm3)
11”
#5 SpragueStandard
45LT, 60LT, 100LT
Non-temperature compensated or temperature compensated
Red plastic snap-seals
As required
As required
ASA 49 Gray Paint
“A” Series:Proven meters with improved flexibility.
Instrumentation compatibleRegulatory demands are requiring audit
trails on smaller loads. Recognizing this
need, we made sure that the “A” Series
meters were fully compatible with all
volume and temperature-integrating
instruments available today.
EZ-VU adjustment systemAdjusting our meters just got even easier!
The EZ-VU adjustment system consists of a
larger port opening, a clear Lexan port
cover, and an adjustment tool with an
integral light. The larger opening, combined
with the illuminated tool, lets you see where
the displacement and speed screws are
located. The Lexan port seal, through which
the adjustment tool passes, allows
adjustment and proving without removal
and replacement of the hand-hole plate.
Easier to installThe ‘ET’ Easy Turn design allows 2 to 3
times more wrench swing than the
competition – as much as a full 120
degrees (see table below) for meters
mounted directly against a wall – making
the Schlumberger 675A, 800A, and 1000A
‘ET’ gas meters the easiest and safest to
install in North America.
Schlumberger “A” Series meters dispel old
notions about large diaphragm meters.
Compact size can co-exist with long life.
Weight can diminish without compromising
durability. Diaphragm meter accuracy is
available across the complete range, from
small to large commercial metering
applications.
Schlumberger “A” Series meters give
you the physical size you need, without
compromising our tradition for highly
accurate meters that are a good value. This
customer-driven design makes for easier
handling in the shop and the field. The “A”
Series retrofits to any meter set within its
capacity range, eliminating the need for
“installation specific” meter inventory.
Compact without compromiseDespite their leaner profile and reduced
weight, the “A” Series meters still offer the
long-term durability you’ve come to expect
from Schlumberger’s big diaphragm meters.
Utilization of the time-tested and well-
proven seamless diaphragm continues, as
does the wearless orbital valve and
lubrication-free bearing design. These
features ensure accuracy throughout the life
of the meter, keeping overall measurement
costs low.
Accuracy. Reliability.
Durability. These
attributes come from a
focus on continuous
improvement. In our
commitment to research
and development,
Schlumberger has
retooled and redesigned
our commercial
diaphragm meters to
provide the safest,
easiest to install gas
meters available today.
Bolts to rotate index1
2
4
Weight43 lb
54 lb
60 lb
Wrench Swing Angle30º-40º
120º-180º10º-20º50º-70º10º-20º50º-70º
Connection Size #5 Sprague
All other sizes#5 Sprague
All other sizes#5 Sprague
All other sizes
MeterSchlumberger
1000A ETAmerican AL1000
Equimeter1000
Reversible top-mounted index ensureseasy installation where the meter inlet and outletneed reversing
Self-dressing orbital valve and seatcontribute to superior valve wear, leading toimproved accuracy and repeatability over the life of the meter.
“O”-Ring diaphragm seal ensures consistentsealing throughout wide environmental temper-ature variations. Neoprene gasket material makesrepairs simple — eliminates the need for costlycork gasket removal.
Temperature compensation (optional) islocated in the main measurement chamber formore prompt response to temperature changes
EZ-VU Adjustment Port
Hex bushing ensures self-aligning valve cover and maintainsconsistent orbiting of the valve assembly
Mainshaft and tangent crank are re-engineered for a one piece construction minimizing assembly variations
Web-free valve seat allows mainshaft and tangent crank to be replaced without removing valve seat
Lubrication-free bearings ensure long, maintenance-free operation
Shaft support is an integral part of the aluminum casting, pre-venting any misalignment since each casting is geometrically precise.
Temperature compensation (optional) is located in the mainmeasurement chamber for more prompt response to temperaturechanges
Carrier bracket is re-engineered with tongue-and-groove design, allowing for consistent, precise positioning of carrier wires and reducing wire bending adjustment
EZ-VU Adjustment Port“A”
se
rie
s 4 0 06 7 58 0 01 0 0 0 C L A S S
200 400 600 800 ft3/hr5.7 11.3 17.0 22.7 m 3/hr
Diffe
rent
ial P
ress
ure
250 1.0
125 .50
62 .25
0 0
500 2.0Pa "WC Pressure Loss - 0.6 sg Gas
Flow Rate
0 0.5 1 1.5 2 2.5 3 ft3
Check Rate
Accelerated Life Test 400A Running at 800ft 3/hr (22.6 m3/hr)
Open Rate
% A
ccur
acy
0
-0.5%
-1%
-1.5%
-2%
+0.5%
+1%
+1.5%
+2%
0 .001 .03 .04 .05 .07 .08 m 3
Volume (in Millions)
00 400 800 1200 1600 2000 2400
68
Diffe
rent
ial P
ress
ure
Flow Rate
675A
(30L
T)80
0A (4
5LT)
1000A (#5 Std.)
Pressure Loss - 0.6 sg Gas
11.3 22.6 40 45.3 56.6 m 3/hrft3/hr
250 1.0
125 .50
62 .25
0 0
1.5
500 2.0Pa "WC
0 2 4 6 8 10 12 ft3
0 .05 .11 .17 .22 .28 .34 m 3
Volume (in Millions)
Check Rate
Open RateMet
er A
ccur
acy
0
-0.5%
-1%
-1.5%
-2%
+0.5%
+1%
+1.5%
+2%Accelerated Life Test 675 Running at 900ft 3/hr (25.5 m3/hr)
400A:The compact performer for lightcommercial metering
movement assemblies, carrier wire brackets
and diaphragms. That means less inventory
to carry and more flexibility in installation.
The top and top gasket are the same on the
new 400A as on our previous 400 meter.
Ideally suited to light commercial and high-
capacity domestic metering requirements,
the Schlumberger 400A offers:
• 45% reduction in size from our previous
model
• interchangeable parts with our 250 and
400 models
• lightest, narrowest 400-class meter on
the market
• fewer moving parts than any other
400-class meter
• performance that exceeds ANSI B109.1.
Schlumberger’s 400A meter is the most
compact and lightweight 400-class meter
on the market today. Maintaining the use of
a wearless orbital valve, single convolution
diaphragms, and lubrication-free bearings,
the 400A delivers maximum initial and
sustained accuracy.
Designed to fitAvailable with either Sprague standard 625⁄32”
(172mm) or 81⁄4” (210mm) center-to-center
hubs, and with a reduced height of 1422⁄32”
(374mm), the 400A can replace any existing
400-class meter with no need for expensive,
time-consuming piping rework.
The 400A utilizes several proven
components from Schlumberger’s 250-class
meter, including side covers, side cover
gaskets, non-TC and TC lower main
675A, 800A, 1000A:Diaphragm accuracy for higher capacitymetering applications
feature a top-mounted index drive for full
instrumentation compatibility. In addition,
the index can be rotated to 180˚ for
installations where it is more convenient to
install the meter backwards.
Schlumberger 675A–100A meters offer
these advantages for commercial metering
applications:
• reduced size and weight compared to
previous models
• fully compatible with today’s volume and
temperature-integrating instruments
• retrofit to any meter set within
the capacity range
• performance that exceeds
ANSI B109.2.
The larger members of the “A”-series
combine accuracy and long life in a
compact meter. Thanks to modern
engineering and production techniques, the
Schlumberger 1000A, for example, weighs
28 percent less than our previous 1000-
class meter. Its height has been cut by 29
percent, creating a leaner, tighter meter.
This new smaller size adds up to big
advantages in easier shipping, handling and
installation – at just 19” (483mm) from base
to hub, these meters can be applied
wherever capacities of 675-1000 ft3/h (18-
28m3/hr) are needed.
With the size reduction, all
Schlumberger 800A and 1000A meters will
retrofit into any of your current meter sets.
Costs are controlled by eliminating
inventory tracking of different-sized meters
in the same capacity range.
Easier to install, easier to useThese high performance meters offer
advantages after installation, too. They all
Meters not shown to scale. For dimensions, refer to Product Bulletin A15G.