series telescopic crane - truck utilities telescopic crane has a maximum lifting capacity of 7500 lb...
TRANSCRIPT
7500 Series Telescopic Crane
7500 Series Telescopic Crane
Let our telescopic cranes take on the heavy lifting. The IMT 7500 Series telescopic crane has a maximum lifting capacity of 7500 lb (3401.9 kg) and a horizontal boom reach of 30' (9.1 m) — the longest in the industry. Featuring the patent-pending Penta BoomTM design, this crane is built for strength and control, and when combined with an IMT Dominator® creates the ultimate service and maintenance truck.
Penta Boom DesignDifferent material thickness to address structural requirements, while controlling the weight of the crane.
Radio Remote ControlThe capacity indicator lights on our pistol grip radio remote control tell the operator how much crane lifting capacity has been used. If the crane reaches the overload point, an automatic safety feature slows the crane to 50%.
Radio Remote Control ReceiverTo simplify troubleshooting and increase productivity, our radio remote control receiver provides an LED readout detailing error codes. It also uses programmable logic for precise control of individual functions.
Flip SheaveOur unique flip sheave allows operators to work in tighter work areas by reducing the boom tip profile height by 8" (20.3 cm).
Standard Features
• 30' (9.1 m) of boom reach• Patent-pending Penta Boom design• Fully proportional “pistol grip” radio remote control• Flip sheave boom tip• Boom angle -10° to +80° (-0.2 to 1.4 rad)• Increased capacity• Patent-pending hook stow• Patent-pending anti-two-block device• Radio remote control receiver
Options
• 22' (6.7 m) • Boom tip lights
Body Sizes
• Dominator I• Dominator II
Radio Receiver
Hook Stow
Anti-two-block Device
In addition to these specifications, heavy-duty electrical and cooling systems are required. It is recommended that the vehicle be equipped with an engine tachometer, auxiliary brake lock, and power steering.
Minimum Chassis Specifications
Chassis Style Conventional cab
Front Axle Rating (GAWR) 5000 lb (2268 kg)
Rear Axle Rating (GAWR) 9500 lb (4309.1 kg)
Wheelbase 154" (391 cm)
Cab-to-Axle 84" (213 cm)
Resistance to Bending Moment Minimum 600,000 in-lb (6913 kg-m)
Frame Section Modulus 14.2 cu in (232.7 cm3)
Gross Vehicle Weight Rating 14,500 lb (6577 kg)
40.6"(103 cm)
8.7"(22 cm)
8.1"(20.6 cm)
53.9" (137 cm)Center of Gravity
162" (411.5 cm)
17.75"(45 cm)
41.4" (105 cm)
20.2"(51 cm)
35.2"(89.4 cm)
23.4"(59.3 cm)
18.1"(46 cm)14.75"
(37.5 cm)
14.75"(37.5 cm)
20.8" (52.8 cm)
11'-11"(3.6 m)
16'-11"(5.1 m)
21'-5"(6.5 m)
75°
60°
45°
30°
15°
0°
67003040
75003400
75003400
51502335
36501655
27251235
24351105
22601025
2045930
61452785
45402060
36101635
32001450
29001315
26151185
39451790
42651935
46552110
53852445
75003400 6480
2940
80°
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg lb
kglb
kg
lb
kglb
kglb
kg
lb
kg
lb
kg
lb
kg
13'-0"(4.0 m)
21'-6"(6.6 m)
30'-0"(9.1 m)
75°
60°
45°
30°
15°
0°
63002860
73303325
75003400
46402105
23601070
2060935
1760800
1590720
1350615
58802665
39301785
33301510
29401335
27001225
23001045
40001815
44752030
50002270
54402470
75003400 6600
2995
80°
lb
kg
lb
kg
lb
kglb
kg
lb
kg
lb
kg lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kglb
kg
lb
kg
*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position.
• Maximum one-part line weight is 4300 lb (1950 kg)• The weight of load-handling devices is part of the load lifted and must
be deducted from the rated capacity
• Maximum one-part line weight is 4300 lb (1950 kg)• The weight of load-handling devices is part of the load lifted and must
be deducted from the rated capacity
*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position.
22' Load Chart
30' Load Chart
7500 Series Specifications 22' Boom Crane Rating* 47,000 ft-lb (6.8 tm)
Max. Capacity 7500 lb (3401.9 kg) Max. Horizontal Reach (with flip sheave up) 22' 6" (6.9 m) Max. Horizontal Reach (with flip sheave down) 21' 8" (6.6 m) Max. Capacity @ Max. Reach 1350 lb (612.3 kg) Fully Retracted 11' 11" (3.6 m)
Hydraulic Extensions59.7" (151.6 cm)57.2" (145.3 cm)
Lifting Height (with flip sheave down) 21' 5" (6.5 m) Crane Weight 1795 lb (814.1 kg) Crane Storage Height 40.6" (103.1 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base
42" (106.7 cm)19.6" (49.8 cm)
Required Mounting Space for Crane Base 20" x 21" (50.8 x 53.3 cm) Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min) Tie-Down Bolt Pattern 14.75" x 14.75" (37.5 x 37.5 cm) Rotational Torque 9000 ft-lb (1.3 tm) Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec
7500 Series Specifications 30' Boom Crane Rating* 52,000 ft-lb (7.3 tm)
Max. Capacity 7500 lb (3401.9 kg) Max. Horizontal Reach (with flip sheave up) 30' 10" (9.4 m) Max. Horizontal Reach (with flip sheave down) 30' (9.1 m) Max. Capacity @ Max. Reach 1350 lb (612.3 kg) Fully Retracted 12' 11" (3.9 m) Hydraulic Extensions 102" x 2 (259 cm x 2) Lifting Height (with flip sheave down) 30' 7" (9.3 m) Crane Weight 2400 lb (1088.6 kg) Crane Storage Height 40.6" (103.1 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base
49.9" (126.8 cm)22.2" (56.4 cm)
Required Mounting Space for Crane Base 20" x 21" (50.8 x 53.3 cm) Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min) Tie-Down Bolt Pattern 14.75" x 14.75" (37.5 x 37.5 cm) Rotational Torque 9000 ft-lb (1.3 tm) Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec
40.6"(103 cm)
8.7"(22 cm)
8.1"(20.6 cm)
53.9" (137 cm)Center of Gravity
162" (411.5 cm)
17.75"(45 cm)
41.4" (105 cm)
20.2"(51 cm)
35.2"(89.4 cm)
23.4"(59.3 cm)
18.1"(46 cm)14.75"
(37.5 cm)
14.75"(37.5 cm)
20.8" (52.8 cm)
47.3" (120.1 cm)
6.5"(16.5 cm)
18.1"(46 cm)
23.4"(59.3 cm)
20.8" (52.8 cm)
14.75"(37.5 cm)
14.75"(37.5 cm)
40.6"(103.1 cm)
8.7"(22.1 cm)
17.75"(45 cm)
175" (444.7 cm)50.4" (128 cm)47.8" (121.4 cm)
21.4"(54.4 cm)
Center of Gravity
47.3" (120.1 cm)
6.5"(16.5 cm)
18.1"(46 cm)
23.4"(59.3 cm)
20.8" (52.8 cm)
14.75"(37.5 cm)
14.75"(37.5 cm)
40.6"(103.1 cm)
8.7"(22.1 cm)
17.75"(45 cm)
175" (444.7 cm)50.4" (128 cm)47.8" (121.4 cm)
21.4"(54.4 cm)
Center of Gravity
40.6"(103 cm)
8.7"(22 cm)
8.1"(20.6 cm)
53.9" (137 cm)Center of Gravity
162" (411.5 cm)
17.75"(45 cm)
41.4" (105 cm)
20.2"(51 cm)
35.2"(89.4 cm)
23.4"(59.3 cm)
18.1"(46 cm)14.75"
(37.5 cm)
14.75"(37.5 cm)
20.8" (52.8 cm)
29.6"(75.2 cm)
47.3" (120.1 cm)
6.5"(16.5 cm)
18.1"(46 cm)
23.4"(59.3 cm)
20.8" (52.8 cm)
14.75"(37.5 cm)
14.75"(37.5 cm)
40.6"(103.1 cm)
8.7"(22.1 cm)
17.75"(45 cm)
175" (444.7 cm)50.4" (128 cm)47.8" (121.4 cm)
21.4"(54.4 cm)
Center of Gravity
29.6"(75.2 cm)
Nothing Says Commitment Like The Diamond.SM IMT has been meeting the needs of our customers for over 50 years and none of it would have been possible without a distributor network that’s second to none. IMT distributors offer fast, knowledgeable service and the ability to help customers find the right product for every application. When you’re looking for reliable equipment and dependable service, remember IMT.
IMT reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. IMT, IMT logo, Dominator, and Penta Boom are registered trademarks or trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA. NOTHING SAYS COMMITMENT LIKE THE DIAMOND is a service mark of Iowa Mold Tooling Co., Inc.© 2011 Iowa Mold Tooling Co., Inc. All Rights Reserved.
09/11
Iowa Mold Tooling Co., Inc.500 Highway 18 West Garner, Iowa 50438800-247-5958 • www.imt.com
Planetary Winch• Capacity of 3800 lb (1724 kg) powered by
high-torque hydraulic motor• Single line operating speed of 60 fpm (18.2 m/min)
under no-load conditions• Maximum two-part line capacity of 7500 lb (3400 kg)• Equipped with 85' (25.9 m) of 3/8" (9.5 mm) of
6 x 25 FW PRF LRL IWRC XIPS wire rope• Anti-two-block prevents the snatch block assembly
from coming in contact with boom tip• Speed of winch is 60 fpm (0.3 m/sec)• Meets ANSI B30.5 standards
Hydraulic System• Open-centered, full pressure system• System requires 10 gpm (37.9 L/min) optimum oil
flow at 3000 psi (206.8 bar)• Fully proportional control valve with “pistol grip” radio
remote control system• Includes radio elimination cable, hydraulic oil reservoir,
and suction and return line filters
Power Source• Power provided by integral-mounted hydraulic
pump and PTO• Min. requirement is 23.5 hp (17.5 kW) based on
10 gpm at 3000 psi (37.9 L/min at 206.8 bar)• Other standard power sources can be utilized
Cylinder Holding Valves• All cylinders equipped with integral-mounted
counterbalance valves• Prevent sudden cylinder collapse in case of
component failure
Rotation System• Consists of a worm gear and turntable gear bearing• Powered by a high-torque hydraulic motor • Standard rotation is 400° (6.98 rad)• Speed rotation is 30 seconds
Excessive Load Limit System (ELLS)• Pressure transducer used to sense overload• When overloaded, the following functions are
stopped: boom down, extension out, and winch up