PrompterPeople

Set-Up Guide - ProLine StagePro

126 Dillon Ave Campbell Ca 95008 U.S.A. 408-866-9100 w w w.prompterpeople.com

1 2 3

4 5 6

7 8 9

Tighten the thumb screws to securethe glass in the clamp.

Put the skirt around the monitorif needed.

Attached monitor to the base

SCrew the pole into the base

Attached clamp to stand and secure by turning the thumb screw

Slide the glass into the clamp.

You can adjust the angle of the glass tobest match the readers height. The thumb screw will tilt the glass to the correct angel

The monitor sits on the platform near the ground.The assmbly should looklike this.

Adjust the height of the glass for the best view for the reader.