Shanghai Bagen Electronic Science & Technology Co., Ltd, an esteemed manufacture that produces YASH® electric mirror defogger which is widely used in bathroom mirror decoration of hotels, restaurants, villas, service apartments, and residential buildings.

When a YASH® electric mirror defogger is applied to any normal mirror the result is a crystal clear, fog free mirror.

All of BAGEN's defoggers are manufactured under ISO-9001 system control, Our defoggers meet the international standards and have CE and UL approval. With high quality and reasonable price, YASH® mirror defoggers are exported to USA, Europe, Canada, India, Mid East as well as others.

Bagen's professional engineers, as well as all staff, are dedicated to the introduction of advanced defogging systems. Let's build a better living condition of steam free bathrooms together.

PRODUCTS

We all know the problem, it's an everyday issue, step out from the shower or bath, and you find your bathroom mirror is steamed up and usually you have to wipe away the condensation with a towel or your hand. Well there is a solution! YASH® mirror defoggers (synonymous with mirror heater, mirror heating pads, de-misting pads) provide just a nice bit of comfort for both your family and guests.

WORKING PRINCIPLE

YASH® mirror defoggers are adhesive heating pads, when installed onto the back of mirror. They provide heat energy, which transfers directly to the mirror, resulting in a warming of mirror surface. This gets rid of the mist. So every time you step out from the shower or bath, you no longer have to wait for the mist to clear before shaving, drying your hair or putting make up on.

TECHNICAL PARAMETERS Voltage :12V-24V, 120V-220V Input power: 2.0-2.5w/dm Double insulated layers Self-adhesive backing

Average Temperature Rise: 15-18 ℃

Thickness: 0.4mm

FEATURES Safe to use, (CE, UL approval) Easy to install, Low cost Temperature is self-regulating

OTHER ADVANTAGES OVER NORMAL MIRRORS Prevents moisture damage to silver coatings Retains mirror in the place in the event of breakage Reduces need for cleaning SPECIFICATION CUSTOM DEFOGGERS DESIGN STANDARD SERIES: RECTAGULAR, OVAL, ROUND, SQUARE

SERIESⅠ: RECTANGULAR SHAPE

Standard models SERIES I shape: rectangular

Power rating(watt) Energy consumption (kw.h) code Size

120V 220V 120V 220V

R-1624 400mm×600mm (16″×24″) 46 46 0.046 0.046

R-1826 450mm×650mm (18″×26″) 57 57 0.057 0.057

R-2432 600mm×800mm (24″×32″) 96 96 0.096 0.096

R-2436 600mm×900mm (24″×36″) 108 108 0.108 0.108

R-3040 750mm×1000mm (30″×40″) 150 150 0.15 0.15

R-3448 850mm×1200mm (34″×48″) 204 204 0.204 0.204

R-4052 1000mm×1300mm (40″×52″) 260 260 0.26 0.26

R-4860 1200mm×1500mm (48″×60″) 360 360 0.36 0.36

SERIESⅡ: OVAL SHAPE

Standard models

seriesⅡ shape:oval

Power rating(watt) Energy consumption

(kw.h) Code Size

120V 220V 120V 220V

O-1624 400mm×600mm (16″×24″) 36 36 0.036 0.036

O-1826 450mm×650mm (18″×26″) 45 45 0.045 0.045

O-2432 600mm×800mm (24″×32″) 76 76 0.045 0.045

O-2436 600mm×900mm (24″×36″) 87 87 0.087 0.087

O-3040 750mm×1000mm (30″×40″) 123 123 0.123 0.123

O-4048 1000mm×1200mm (40″×48″) 201 201 0.201 0.201

O-4852 1200mm×1300mm (48″×52″) 218 218 0.218 0.218

SERIESⅢ: ROUND SHAPE

standard models

SERIES Ⅲ SHAPE:ROUND

Power rating

(watt)

Energy consumption

(kw.h) code Size

120V 220V 120V 240V

R-1515 380*380mm (15″×15″) 20 20 0.020 0.020

R-2020 520*520mm (20″×20″) 41 41 0.041 0.041

R-2525 640*640mm (25″×25″) 65 65 0.065 0.065

R-3131 780*780mm (31″×31″) 99 99 0.099 0.099

R-3535 880*880mm (35″×35″) 127 127 0.127 0.127

R-4040 1000*1000mm (40″×40″) 166 166 0.166 0.166

R-4444 1100*1100mm (44″×44″) 202 202 0.202 0.202

R-4848 1200*1200mm (48″×48″) 243 243 0.243 0.243

Yash defogger was developed specifically for bathroom mirrors and is produced to the highest standards in various sizes and voltages. How to select yash defogger to make a special heated mirror? Selecting size of YASH® mirror defogger should be based on the mirror size. If you require all of your mirror to be de-misted, then the YASH® pad should be the same size as your mirror. If you don’t want to have all of your mirror de-misted, but we recommend that our demister pad be no smaller than 60% of your mirror size. Different shapes make no difference in choosing. APPLICATION EXAMPLES OF YASH DEFOGGER

Fogless Mirror Attached Directly to the Wall

Fogless Mirror Plugged into Wall Socket

Framed Fogless Mirror

YASH Defogger as a Bathroom Accessory

INSTALLATION INSTRUCTION Safety points: 1. yash Defogger is designed to be used as a bathroom mirror defogger only. Install in accordance with these instructions. Any other use is not recommended. 2. Installation is not difficult and conforms to standard industry practice. As with any electrical product, we do recommend installation be performed by a qualified person in accordance with local codes. Remember to disconnect power at the fuse breaker panel before installation. 3, The heating element of mirror defogger should never be cut or damaged. This will render the product useless. It cannot be repaired. Please take particular care over this point. 4, However you may trim the product so long as the actual heating element is NOT damaged, which is common for yash oval and round series. Round and oval Defoggers should have excess adhesive backing material trimmed, but not closer than 20 mm from the electrical heating grid component

5, The power supply cable of the defogger should not be pulled or drawn forcefully in case of damage.

FITTING THE HEATER TO THE MIRROR 1. Adhere the heater pad to the back of the mirror, NOT to the wall. 2. Always handle mirrors with care. Lay the mirror face down on a

protective cushion/surface 3. The back of the mirror must be absolutely clean, dry and grease free. 4. Peel off the protection paper first in about 10cm width and fold the paper,

adhere the heater with self-backing directly onto the back of the mirror, using towel or some other soft rubber to wipe the back of the defogger. In the mean time, rip off the protection paper to stick the defogger onto the mirror easily.

5. Ensure that there are no trapped air bubbles and that the heater is

positioned where you would like.

INSTALL THE HEATED MIRROR ONTO THE WALL The wall will be installed electric heated mirror can be wood, ceramic tile, marble and so on, which must be dry, stable, even otherwise, the heated mirror will be uneven. The place that the heated mirror will be installed should be wiring snugly. eg, lighting circuit. Before install mirror, properly apply some clear silicon around the mirror by glue gun onto the surface of wall that will install mirror. Or if the mirror rests on clips, place a layer of silicon on the bottom of the clips. Please allow a 2mm gap between the mirror and hard substances (eg ceramic brick, marble, tiles as well as metal and wood periphery around mirrors) If you have metal periphery, please ensure the mirror is earthed in line with regulations. ELECTRICAL INSTALLATION INFORMATION Connect the wires of the defogger with the power code following the electronic standards.

The power supply cable may be conveniently taken to the lighting circuit. The heater should be switched. Which can be wired a simple switch, light fixture or fan. We always recommend our heaters are switched with bathroom lights so that it comes on and off with the lights. Fix the mirror onto wall by silicon or clips, then apply neutral silicon again to seal around the edge of the mirror, which is the same way with normal

mirror. Turn on the electricity and test the mirror. about 3-5minuters, the mirror becomes warm and defogging. The manufacturer/supplier cannot be held responsible for damage caused by improper installation