sharp lc42_46_52d64u

8/10/2019 Sharp LC42_46_52D64U

1/71

OPERATION MANUAL

MODE D'EMPLOI

MANUAL DE OPERACIN

LIQUID CRYSTAL TELEVISION

TLVISEUR ACLTELEVISOR CON PANTALLA

DE CRISTAL LQUIDOLC-42D64ULC-46D64ULC-52D64U

ENGLISH

FRANAIS

ESPA

OL

IMPORTANT : Please read this operation manual before starting operating the equipment.

IMPORTANTE : Lea este manual de operacin antes de comenzar a operar el equipo.

8/10/2019 Sharp LC42_46_52D64U

2/71

8/10/2019 Sharp LC42_46_52D64U

3/71

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

The lightning flash with arrow-headsymbol, within an equilateral triangle,is intended to alert the user to thepresence of uninsulated dangerousvoltage within the product'senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons.

The exclamation point within atriangle is intended to alert the userto the presence of importantoperating and maintenance(servicing) instructions in the

literature accompanying the product.

CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

1

LC-42D64U

LC-46D64ULC-52D64U

OPERATION MANUAL The illustrations and on-screen displays in this operation

manual are for explanation purposes and may vary slightly fromthe actual operations.

Menu items that are not selectable are grayed out. The examples used throughout this manual are based on the

LC-42D64U model.

IMPORTANT:To aid reporting in case of loss or theft, please record theTV's model and serial numbers in the space provided. The

numbers are located at the rear of the TV.

Model No.:

Serial No.:

LIQUID CRYSTAL TELEVISION

ENGLISH

IMPORTANT INFORMATION

ENGLISH

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDESLOT, FULLY INSERT.

CAUTION:

8/10/2019 Sharp LC42_46_52D64U

4/71

WARNING:FCC Regulations state that any unauthorized changes or modifications to this equipment not expresslyapproved by the manufacturer could void the user's authority to operate this equipment.

Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NationalElectrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to thegrounding system of the building, as close to the point of cable entry as practical.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of

mercury. Disposal of these materials may be regulated due to environmentalconsiderations. For disposal or recycling information, please contact your localauthorities, the Electronic Industries Alliance: www.eiae.org, the lamp recyclingorganization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP(For U.S.A. only)

CAUTION:This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to otherequipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shieldedcables and connectors for connections.

INFORMATION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATIONSharp Plaza, Mahwah, New Jersey 07430-2135TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

CAUTION:DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.

THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TOTHE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDEDBY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'SINSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES

RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BEMOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE

THE PRODUCT AND CART COMBINATION TO OVERTURN.

2

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of DolbyLaboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMILicensing LLC.

IMPORTANT INFORMATION

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-42D64U/LC-46D64U/LC-52D64U

Trademarks

Products that have earned the ENERGY STARare designed to protect the environment through superior energy

efficiency.

8/10/2019 Sharp LC42_46_52D64U

5/71

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damageif improperly handled. This product has been engineered and manufactured with the highest priority on safety.However, improper use can result in electric shock and/or fire. In order to prevent potential danger, pleaseobserve the following instructions when installing, operating and cleaning the product. To ensure your safetyand prolong the service life of your Liquid Crystal Television, please read the following precautions carefullybefore using the product.

1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. Thewide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatuscombination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operatenormally, or has been dropped.

Additional Safety Information

15) Power SourcesThis product should be operated only from the type of power source indicated on themarking label. If you are not sure of the type of power supply to your home, consult your product dealer orlocal power company. For products intended to operate from battery power, or other sources, refer to theoperating instructions.

16) OverloadingDo not overload wall outlets, extension cords, or integral convenience receptacles as thiscan result in a risk of fire or electric shock.

17) Object and Liquid EntryNever push objects of any kind into this product through openings as they may

touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spillliquid of any kind on the product.18) Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:a) When the AC cord or plug is damaged,b) If liquid has been spilled, or objects have fallen into the product,c) If the product has been exposed to rain or water,d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualified technicianto restore the product to its normal operation,

e) If the product has been dropped or damaged in any way, andf) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement PartsWhen replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the original part.Unauthorized substitutions may result in fire, electric shock, or other hazards.20) Safety CheckUpon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operating condition.21) Wall or ceiling mountingWhen mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

3

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many yearsof trouble-free operation of your product, please read the Important Safety Instructions carefully beforeusing this product.

IMPORTANT SAFETY INSTRUCTIONS

8/10/2019 Sharp LC42_46_52D64U

6/71


4

Water and Moisture Do not use this product near water - for example, near a bath tub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

Stand Do not place the product on an unstable cart, stand, tripod or table. Placing theproduct on an unstable base can cause the product to fall, resulting in serious personal injuriesas well as damage to the product. Use only a cart, stand, tripod, bracket or table recommendedby the manufacturer or sold with the product. When mounting the product on a wall, be sure tofollow the manufacturer's instructions. Use only the mounting hardware recommended by themanufacturer.

Ventilation The vents and other openings in the cabinet are designed for ventilation. Do notcover or block these vents and openings since insufficient ventilation can cause overheatingand/or shorten the life of the product. Do not place the product on a bed, sofa, rug or othersimilar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unlessproper ventilation is provided or the manufacturer's instructions are followed.

Heat The product should be situated away from heat sources such as radiators, heatregisters, stoves, or other products (including amplifiers) that produce heat.

The Liquid Crystal panel is a very high technology product with 6,220,800 thin film transistors, giving you fine picturedetails.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that thisdoes not affect the performance of your product.

Precautions when transporting the TV Be sure to always carry the TV by two people holding it with two hands one hand on

each side of the TV.

The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when theproduct is dropped or applied with impact. Be careful not to be injured by broken glass piecesin case the panel breaks.

Lightning For added protection for this television equipment during a lightning storm, orwhen it is left unattended and unused for long periods of time, unplug it from the wall outletand disconnect the antenna. This will prevent damage to the equipment due to lightning andpower-line surges.

Power Lines An outside antenna system should not be located in the vicinity of overheadpower lines or other electric light or power circuits, or where it can fall into such power linesor circuits. When installing an outside antenna system, extreme care should be taken to keepfrom touching such power lines or circuits as contact with them might be fatal.

Selecting the location Select a place with no direct sunlight and good ventilation.

8/10/2019 Sharp LC42_46_52D64U

7/71

5

Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antennasystem is grounded so as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of themast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PERNATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNALEAD IN WIRE

GROUNDCLAMP

NEC NATIONAL ELECTRICAL CODE

To prevent fire, never place any type of candle or flames on the top or near the TV set.

To prevent fire or shock hazard, do not expose this product to dripping or splashing.No objects filled with liquids, such as vases, should be placed on the product.

To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavyitems.

Turn off the main power and unplug the AC cord from the wall outlet before handling. Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may

scratch the panel surface. Use a soft damp cloth to gently wipe the panel when it is really dirty. (It may scratch the panel surface when wiped strongly.) If the panel is dusty, use an anti-static brush, which is commercially available, to clean it. To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it,

such materials may damage the panel surface. To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.

GROUNDING CONDUCTORS(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODESYSTEM(NEC ART 250, PART H)

ELECTRIC

SERVICEEQUIPMENT

ANTENNADISCHARGE UNIT(NEC SECTION 810-20)

Do not display a still picture for a long time, as this could cause an afterimage to remain.


8/10/2019 Sharp LC42_46_52D64U

8/71

Supplied accessories

Attaching the stand

Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it

from being damaged.

Attach the supporting post for the stand unitonto the base using the box for the stand unitas shown below.

The supporting post attaches to the base atan off-centered location on the base. Be sureto attach the supporting post in the directionindicated below and attach the stand to the TVwith the wider side of the base facing forward.

CAUTION

Attach the stand in the correct direction. Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Confirm that there are 8 screws (4 short

screws and 4 long screws) supplied with thestand unit.

1

2

Hex key

Long screws

Forward

1Insert the stand into the openings on the

bottom of the TV.2Insert and tighten the 4 short screws into

the 4 holes on the rear of the TV.

NOTE

To detach the stand, perform the steps in reverse order.

3

1

1

2 2

Hex key

Short screws

Soft cushion

QUICK REFERENCE

6

NOTE

Always use the AC cord supplied with the TV. AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult to the following. SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP 6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.

Make sure the following accessories are provided with the product.

Remote control unit(g1)

Page 8

AAA size battery(g2)

Page 8

AC cord(g1)

Page 7

Stand unit(g1)

Page 6

Cable clamp (g1)Cable tie (g1)

Page 7

Operation manual(g1)

8/10/2019 Sharp LC42_46_52D64U

9/71

POWERindicator

Power

7

Ventilation & Cleaning Tips

Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use nearwater. The AQUOS television is designed for AC use only and should be used with supplied AC cord.

Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe andavoid pressing on the screen. To clean the outer cabinet, use the same method. Do not useliquid or aerosol cleaners.

The screen is glass and can be scratched or broken when dropped or impacted.

QUICK REFERENCE

STOP! To safely remove the AQUOS television from the box

It's best to use 2 people to remove the AQUOS television for stability. Lift onto installation location as the diagram illustrates.

QUICK INSTALLATION TIPS

Attach your antenna to the back of the AQUOStelevision. (See page 12.)

Place the Ferrite core in the space indicated inthe below figure and bundle the cords properlywith the cable clamp and the cable tie.

How to turn on the AQUOS television for thefirst time.

A) Press POWER on the AQUOS television.Connect the AC plug for the AQUOS televisioninto the AC outlet.

B) The POWER indicator on the front of theAQUOS television lights GREEN.

NOTE

Speakers cannot be detached from the TV. TV angle cannot be adjusted.

AC outlet

Place the TV close to the AC outlet, and keep the powerplug within reach.

NOTE

TO PREVENT RISK OF ELECTRIC SHOCK, DO NOTTOUCH UN-INSULATED PARTS OF ANY CABLESWITH THE AC CORD CONNECTED.

1

2

3

4

Ferrite core

8/10/2019 Sharp LC42_46_52D64U

10/71

30 30

30

30

17 (5 m)

Remote control sensor

8

QUICK REFERENCE

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. Do not mix batteries of different types. Different types of batteries have different characteristics.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemicalleakage in old batteries. Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause

a rash. If you find any chemical leakage, wipe thoroughly with a cloth. The batteries supplied with this product may have a shorter life expectancy due to storage conditions. If you will not be using the remote control unit for an extended period of time, remove batteries from it.

1 Open the battery cover.

Place the batteries with their terminalscorresponding to the (e) and (f)indications in the battery compartment.

2 Insert two AAA size batteries(supplied with the product).

3Close the battery cover.

IMPORTANT:

The POWER indicator on the AQUOS television should light GREEN indicating you havepower to the AQUOS television.

If the POWER indicator on the AQUOS television still does not light up, press TV POWERon the remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEATTHE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ Setup and basic channel setup functionsand USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc.) in your

AQUOS operation manual.

8/10/2019 Sharp LC42_46_52D64U

11/71

9

IMPORTANT INFORMATION ................................. 1Trademarks ............................................................. 2DEAR SHARP CUSTOMER .................................... 3IMPORTANT SAFETY INSTRUCTIONS ................. 3Supplied accessories ............................................. 6QUICK REFERENCE ............................................... 6

Attaching the stand ............................................. 6Contents .................................................................. 9Part names .............................................................10

TV (Front) ...........................................................10TV (Rear/Side) ....................................................10Remote control unit ...........................................11

Preparation ............................................................12Using the remote control unit .............................12

Cautions regarding the remote control unit ....12Antennas ...........................................................12Connecting a Blu-ray disc player, HD-DVD player,

DVD player or a Digital TV STB (Air or Cable) ...13Connecting a VCR, game console

or camcorder ...................................................14Using Digital Audio Output .................................14Connecting HDMI equipment .............................15Connecting a PC ...............................................15PC compatibility chart ........................................15

Watching TV ...........................................................16Turning on the power .........................................16Turning off the power .........................................16Initial setup ........................................................17Simple button operations for

changing channels ..........................................18Simple button operations for

changing volume/sound ..................................19

Setting MTS/SAP stereo mode ..........................20Setting Digital broadcasting audio mode ............20

Basic adjustment settings ................................... 21Menu operation buttons .................................... 21On-Screen Display ............................................ 21Menu items for TV/INPUT 1/2/3 ........................ 22Menu items for HDMI/PC-IN ............................. 22EZ Setup .......................................................... 23Channel Setup .................................................. 23

Antenna Setup - DIGITAL ................................. 24Favorite channel setting .................................... 25Picture adjustments .......................................... 26

OPC setting ................................................. 26

Advanced picture adjustments ..................... 27C.M.S. (Color Management System) ............ 27Color Temperature ....................................... 27

Active Contrast ............................................ 27Fine Motion .................................................. 27I/P Setting .....................................................27Film Mode (3:2 pull-down) ............................ 283D-Y/C ........................................................ 28Monochrome ............................................... 28Range of OPC .............................................. 28

Sound adjustment ............................................ 28Surround .......................................................... 29Bass Enhancer ................................................. 29Power Control .................................................. 29

Using external equipment .................................... 30Displaying an external equipment image ........... 30Input Select ...................................................... 30Displaying an image from HDMI equipment....... 31Input Skip ......................................................... 31

Useful adjustment settings .................................. 32

Auto Sync. adjustment(for Analog PC input mode only) ..................... 32

Fine Sync. adjustment ...................................... 32Image position .................................................. 33Language setting .............................................. 33Reset ................................................................ 33Input Label........................................................ 34Sleep Timer ...................................................... 34

View Mode for 4:3 Programs ............................ 35View Mode for HD Programs ............................ 35View Mode for PC input mode .......................... 36Advanced Option settings ................................. 37

Audio Only ................................................... 37

Digital Noise Reduction ................................ 37Program Title Display ................................... 37Output Select ............................................... 37Color System ............................................... 37Game Play Time ........................................... 37Operation Lock Out ...................................... 37

AV MODE ......................................................... 38Input Signal (for Analog PC input mode only) .... 38Closed Captions and Digital Closed Captions ... 39Caption Setup .................................................. 40Digital Caption Information ................................ 40Secret number setting for parental control ........ 41Parental control (setting V-CHIP level) ............... 43

How to temporarily releasethe V-CHIP BLOCK ........................................ 47

Reactivating the temporarily releasedV-CHIP BLOCK .............................................. 47

Digital Setup ..................................................... 47Audio Setup ................................................. 47Identification ................................................. 47Software Update .......................................... 48

Other viewing options .......................................... 50Freezing images................................................ 50Presetting remote control function .................... 50Controlling HDMI Equipment Using AQUOS LINK... 54

Appendix ............................................................... 58

Removing the stand .......................................... 58Setting the TV on the wall ................................. 58

Troubleshooting ................................................ 59Troubleshooting-Digital broadcasting ................ 59RS-232C port specifications ............................. 60Specifications .................................................. 62Optional accessory ............................................62Information on the software license for this

product ...........................................................64Calling for Service ................................................ 65LIMITED WARRANTY ........................................... 65

Dimensional drawings The dimensional drawings for the LCD TV set are shown

on the inside back cover.

Contents

8/10/2019 Sharp LC42_46_52D64U

12/71

10

Part names

TV (Front)

OPCindicator**

POWERindicator**

OPC sensor*

Remote control sensor

NOTE

*OPC: Optical Picture Control (See page 26.)**See page 16 for TV status indicator.

SLEEPindicator**

TV (Rear/Side)

INPUT 3terminals

RS-232Cterminal

DIGITAL AUDIOOUTPUT terminal

HDMI terminals(INPUT 6)

INPUT 7 terminals(PC-IN)

HDMI terminal(INPUT 5)

Antenna/Cable in INPUT 1 terminals

AC INPUT terminal

INPUT 2 terminalsAUDIO OUTPUTterminals

POWERbutton

MENUbutton

INPUTbutton

Channel buttons(CH/)

Volume buttons

(VOL+/)

HDMI terminal(INPUT 4)

USB terminal

8/10/2019 Sharp LC42_46_52D64U

13/71

3

2

1 16

5

6

4

8

19

17

18

20

21

7

22

10

9

23

11

13

12

25

26

27

14

15 29

24

28

11

Part names

1 TV POWER:Switch the TV power on or enters standby. (See

page 16.)

2 DISPLAY:Display the channel information.

3 SOURCE POWER:Turns the power of the external equipment

on and off.

4 External equipment operational buttons: Operate the external

equipment.

5 0 9:Set the channel. (See page 18.)

6 (DOT):(See pages 18 and 52.)

7 INPUT:Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3,

INPUT 4, INPUT 5, INPUT 6, INPUT 7) (See pages 30 and 31.)

8 VOLk/l:Set the volume. (See page 19.)

9 SURROUND:Select Surround settings. (See page 19.)

10 FREEZE:Set the still image. Press again to return to normal

screen. (See page 50.)

11 EXIT:Turn off the menu screen.

12 OPTION:Display the AQUOS LINK MENU screen. This button

will function only when AQUOS LINK is used. (See pages 54 to 57for details.)

13 REC STOP:Stops one touch recording. This button will function

only when AQUOS LINK is used. (See pages 54 to 57 for details.)

14 SLEEP:Set the sleep timer. (See page 34.)

15 AUDIO:Selects the MTS/SAP or the audio mode during multi-

channel audio broadcasts. (See page 20.)

16 FUNCTION:Switches the remote control for TV, CBL/SAT, VCR,

DVD and AUDIO operation. Indicator lights up for the current

mode. (See pages 50 to 53 for details.)

* To enter the code registration mode, you need to press

FUNCTIONand DISPLAYat the same time.

17 LIGHTD:When pressed all buttons on the remote control unit

will light. The lighting will turn off if no operations are performed

within about 5 seconds. This button is used for performing

operations in low-light situations.

18 VIEW MODE:Select the screen size. (See pages 35 and 36.)

19 ENT:Jumps to a channel after selecting with the 09buttons.

20 FLASHBACK:Return to the previous channel or external input

mode. (See page 18.)

21 CHr/s:Select the channel. (See page 18.)

22 MUTE:Mute the sound. (See page 19.)

23 MENU:Display the menu screen.

24 a/b/c/d/ENTER:Select a desired item on the screen.25 RETURN:Return to the previous menu screen.

26 FAVORITE CH

A, B, C, D:Select 4 preset favorite channels in 4 different

categories. (See page 25 for details.)

While watching, you can toggle the selected channels by pressing

A, B, C and D.

27 FAVORITE:Set the favorite channels. (See page 25.)

28 CC:Display captions from a closed-caption source. (See page

39.)

29 AV MODE:Select an audio or video setting.

(When the input source is TV, INPUT 1, 2 or 3: STANDARD,

MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When the

input source is INPUT 4, 5, 6 or 7: STANDARD, MOVIE, GAME,

PC, USER, DYNAMIC (Fixed), DYNAMIC) (See page 38.)

Remote control unit

NOTE

When using the remote control unit, point it at the TV.

8/10/2019 Sharp LC42_46_52D64U

14/71

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connectionsthat are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,

plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-typeconnector that can easily be attached to a terminalwithout tools (Commercially available).

F-type connector

300-ohm twin-lead cable (flat)

F-type connector

75-ohm coaxial cable (round)

75-ohm coaxial cable

NOTICE

2. A 300-ohm system is a flat twin-lead cable that can beattached to a 75-ohm terminal through a 300/75-ohmadapter (Commercially available).

F-type connector should be finger-tightened only.

When connecting the RF cable to the TV set, do nottighten F-type connector with tools.If tools are used, it may cause damage to your TVset. (The breaking of internal circuit, etc.)

300-ohm twin-lead cable

75-ohm coaxial cable (round)

75-ohm coaxial cable

IN OUT

300-ohm

twin-lead cable

VHF

ANTENNA

UHF

ANTENNA

Combiner(commerciallyavailable)

or

300/75-ohm adapter(commercially available)

300-ohm twin-lead cable (flat)

75-ohm coaxial cable (round)or

Cable TV lead-In

Coaxial cable(commercially available)

Coaxial cable(commercially available)

Home Antennaterminal (75-ohm)

Home Antennaterminal (75-ohm)

12

Preparation

Using the remote control unit

Use the remote control unit by pointing it towards the remote control sensor on theTV. Objects between the remote control unit and the remote control sensor mayprevent proper operation.

Cautions regarding the remote control unit

Do not expose the remote control unit to shock. In addition, do not expose the remotecontrol unit to liquids, and do not place in an area with high humidity.

Do not install or place the remote control unit under direct sunlight. The heat may causedeformation of the remote control unit.

The remote control unit may not work properly if the remote control sensor on the TV isunder direct sunlight or strong lighting. In such cases, change the angle of the lighting orthe TV, or operate the remote control unit closer to the remote control sensor.

Connecting Antenna Cable

1 Cable without a CATVconverter

3Combination VHF/UHF antenna

4Separate VHF/UHFantenna

To TV antennaterminal

2VHF/UHF antenna

Connect the antenna cableto the TV using one of themethods in the illustrationas shown (1,2,3or4).

8/10/2019 Sharp LC42_46_52D64U

15/71

NOTE

To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set theequipment to 1080p output.

See page 15 for connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital TV STB to the HDMI terminal.

Connecting a Blu-ray disc player, HD-DVD player, DVD player or a DigitalTV STB (Air or Cable)

You can use the INPUT 1, INPUT 2 or INPUT 3 terminals when connecting to a Blu-ray disc player, HD-DVDplayer, DVD player, a Digital TV STB (Air or Cable) and other audiovisual equipment.

Blu-ray disc player/HD-DVD player/DVD player/Digital TV STB

When using component cable. (INPUT 1 or 3)

When using composite cable. (INPUT 1 or 2)

Component video cable(commercially available)

Audio cable (commercially available)

Blu-ray disc player/HD-DVD player/DVD player/Digital TV STB

You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVDplayer, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images,select the input source from INPUTon the remote control unit or on the TV. (See pages 30 and 31.)

CAUTION

To protect equipment, always turn off the TV before connecting any external equipment.

Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

AV cable(commercially available)

13

Preparation

8/10/2019 Sharp LC42_46_52D64U

16/71

Connecting a VCR, game console or camcorder

A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using theINPUT 1, 2 and 3 terminals.

VCR/Game console/Camcorder

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 47 for details.) PCM audiooutputs from the terminal.

To optical digital input ofexternal audio devices

When using S-VIDEO cable.

NOTE

The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)

When using composite cable.

VCR/Game console/Camcorder

S-VIDEO cable(commercially available)

AUDIO cable(commercially available)

AV cable(commercially available)

Optical fiber cable(commercially available)

14

Preparation

8/10/2019 Sharp LC42_46_52D64U

17/71

PC

31.5 kHz

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.7 kHz

640 x 480

720 x 400

VGA

800 x 600SVGA

XGA 1024 x 768

WXGA 1360 x 768

70 Hz

60 Hz

72 Hz

75 Hz

56 Hz

60 Hz

72 Hz

75 Hz

60 Hz

70 Hz

75 Hz

60 Hz

O

O

O

O

O

O

O

O

O

O

O

64.0 kHzSXGA 1280 x 1024 60 Hz O

64.0 kHzSXGA+ 1400 x 1050 60 Hz O75.0 kHzUXGA 1600 x 1200 60 Hz O

HDMI cable

(commercially available)

HDMI equipment

HDMI cable(commercially available)

Connecting HDMI equipment

You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.

NOTE

When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 6. To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment

using an HDMI cable and set the equipment to 1080p output.

15

Preparation

PC

PC compatibility chart

It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 38 to set PC input signals.

DDC is a registered trademark of Video Electronics Standards Association.Power Management is a registered trademark of Sun Microsystems, Inc.

VGA and XGA are registered trademarks of International Business Machines Corp.

PC Horizontal Frequency VESA StandardResolution Vertical Frequency

Connecting a PC

When connecting to a PC with an analog RGB terminal. (INPUT 7)

RGB cable(commercially available)

3.5 mm stereo minijack cable(commercially available)

When connecting to a PC with an HDMI terminal. (INPUT 4, 5 or 6)

PC

NOTE

The HDMI terminals only support digital signal.

8/10/2019 Sharp LC42_46_52D64U

18/71

Power

16

Simple operations for watching a TV program

TV POWER(On/Standby)

Turning on the power

Press POWERon the TV, or TV POWERon theremote control unit. POWER indicator (Green): The TV is on. (After a few

seconds, a window appears with sound.)

NOTE The initial setup starts when the TV powers on for the first

time. If the TV has been turned on before, the EZ Setup willnot be invoked. See page 23 for performing EZ Setup fromthe Setup menu.

Turning off the power

Press POWERon the TV, or TV POWERon theremote control unit. The TV enters standby and the image on the screen

disappears. The POWER indicator on the TV turns off.

NOTE

If you are not going to use this TV for a long period of time,be sure to remove the AC cord from the AC outlet.

Weak electric power is still consumed even when the TV isturned off.

Watching TV

TV status indicator (POWER)

ON Lighting (Green)

Lights offStandby

Off is selected in OPC setting

On or On: Display is selected in OPC setting

Lights off

Lighting (Green)

TV status indicator (OPC)

See page 26 for details.

Off is selected in SLEEP setting

30, 60, 90 or 120 is selected in SLEEP setting

Lights off

Lighting (Red)

TV status indicator (SLEEP)

See page 34 for details.

POWERindicator

SLEEP indicator

OPC indicator

8/10/2019 Sharp LC42_46_52D64U

19/71

Language

Air/Cable

CH Search English

Espaol

Franais

CH Search

[ ]20Found[ ]25Air

2

Air ANALOG

Audio : MONO

Air/Cable

Language

CH Search

Air Cable

Air/Cable

Language

CH Search

Start Cancel

When Cable is selected in Antennasetting:

Pressa/bto select Analog & Digital SearchStart to search both analog and digitalbroadcasts or Analog Search Start to searchonly analog broadcasts, and then pressENTER.

The Channel search will start automatically. To exit the Channel search screen, select Cancel,

and then press ENTER.

Language

Air/Cable

CH Search Analog & Digital Search Start

Cancel

Analog Search Start

17

Initial setup

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live.Perform the following steps before you press TV POWERon the remote control unit.

1. Insert the batteries into the remote control unit. (See page 8.)

2. Connect the antenna cable to the TV. (See page 12.)3. Plug in the AC cord to the AC outlet. (See page 7.)

Language setting

Select from among 3 languages: English, French and

Spanish.

Pressa/bto select the desired languagelisted on the screen, and then press ENTER.

Channel search

Channel auto search makes the TV look for allchannels viewable in the set area.

When Air is selected in Antenna setting:

Pressc/dto select Start, and then pressENTER.

Example

Antenna settingMake sure what kind of connection is made with your

TV when selecting Air or Cable.

Pressc/d to select Air or Cable.Press ENTERto enter the setting.

Example

Watching TV

1

2

3

NOTE

If no channel is found, confirm the type of connection madewith your TV and try EZ Setup again. (See page 23.)

8/10/2019 Sharp LC42_46_52D64U

20/71

22.

Air Air DIGITAL

22.122.1

Air

22

Air

2

Air

11

Cable

1

Cable

115

Ca bl e A NALO G

5

Air

5

Air ANALOG

18

Simple button operations forchanging channels

You can change channels in several ways.

NOTE

When selecting a 1-digit channel number, it is notnecessary to press0before the number.

When you enter 0-9only, channel selection will be made ifthere is no operation within a few seconds.

To select a 3-digit channel number

(e. g., Channel 115):

Press 1s1s5sENT

To select a 4-digit channel number(e. g., Channel 22.1):

Press 2s2s (DOT)s1sENT

NOTE

When you enter 09only, channel selection will be made ifthere is no operation within a few seconds.

If you push 0 by itself, nothing will happen. Complete the above steps within a few seconds. When you enter09and (DOT), channel selection will be

made if there is no operation within a few seconds.

Method 1

Using CHr/son the remote control unit or on theTV.

Method 2

1 Press FLASHBACKto switch to the previously

tuned channel.

2 Press FLASHBACKagain to switch back to thecurrently tuned channel.

NOTE

FLASHBACKwill not work if no channel has beenchanged after the TV is turned on.

Method 3

Using remote control buttons 0-9, (DOT) to selectchannels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number(e. g., Channel 5):

Press 5sENT

Watching TV

8/10/2019 Sharp LC42_46_52D64U

21/71

20

20

20

Surround : Off Surround : On

19

Simple button operations forchanging volume/sound

Changing the volumeYou can change the volume on the TV or on theremote control unit.

NOTE

VOLk/lon the TV operates the same asVOLk/l onthe remote control unit.

Using VOLk/l To increase the volume, pressVOLk. To decrease the volume, pressVOLl.

Audio status

Volume adjustment

* When Output Select is set to Variable, the indicator onthe screen changes as shown below.

NOTE

See page 37 for details on the Output Select function.

NOTE

You can have the same settings by choosing Surroundon the menu items. (See page 29.)

SURROUNDproduces Surround effect from thespeakers. Each time you press SURROUND, themode changes between On and Off.

Surround sound options

On: Makes it possible to enjoy natural, realisticsurround sound.

Off: Outputs the normal sound.

Using MUTE on the remote control unitMutes the current sound output.

NOTE

Within 30 minutes of pressing MUTE, mute can becanceled by using one of the methods below.

Mute will be canceled if you pressVOLk/lor MUTE. Mute will be canceled after 30 minutes have passed.

However, the TV will not suddenly output a loud sound asthe volume level is set to 0 automatically.

Mute

Press MUTE. Mwill be displayed on the screen for 30 minutes, and the

sound is silenced.

Watching TV

Using SURROUND on the remote control unit

Output SelectOutput device

Fixed Variable

Variable sound MuteSpeaker

8/10/2019 Sharp LC42_46_52D64U

22/71

2

Air ANALOG

Audio : MONO

2

Air ANALOG

Audio : STEREO

2

Air ANALOG

Audio : MAIN

2

Air ANALOG

Audio : SAP

2

Air ANALOG

Audio : MONO

2

Air ANALOG

Audio : ST(SAP)

2

Air ANALOG

Audio : SAP(ST)

2

Air ANALOG

Audio : MONO

2.2

Air DIGITAL

Audio3 : SURROUND

2.2

Air DIGITAL

Audio1 : STEREO

2.2

Air DIGITAL

Audio2 : STEREO

20

Setting MTS/SAP stereo mode

The TV has a feature that allows reception of soundother than the main audio for the program. This featureis called Multi-channel Television Sound (MTS). The TVwith MTS can receive mono sound, stereo sound and

Secondary Audio Programs (SAP). The SAP featureallows a TV station to broadcast other information,which could be audio in another language or somethingcompletely different like weather information.

You can enjoy Hi-Fi stereo sound or SAPbroadcasts where available.

Stereo broadcasts View programs like live sporting events, shows and

concerts in dynamic stereo sound. SAP broadcasts Receive TV broadcasts in either MAIN or SAP sound. MAIN sound: The normal program soundtrack (either in

mono or stereo). SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

If stereo sound is difficult to hear.

Obtain a clearer sound by manually switching tofixed mono-sound mode.

NOTE

MTS only operates while in TV mode.

You can change MTS asshown below to match thetelevision broadcast signal.

PressAUDIOto togglebetween audio modes.

Examples: when receiving MTS and SAP

STEREO mode MAINkSAP mode

Example: when receiving Digital broadcasting

Setting Digital broadcasting audiomode

The types of audio transmitted in a digital broadcastinclude SURROUND as well as MONO and STEREO.In addition, it is possible for multiple audio tracks toaccompany a single video track.

PressAUDIOto togglebetween audio modes.

Watching TV

STEREOkSAP mode MONO mode

8/10/2019 Sharp LC42_46_52D64U

23/71

ENTER: Select : Enter MENU : ExitRETURN : Back

On-Screen Display

1 Item displayed in yellow This indicates the item currently selected. Press ENTERto go to the adjustment screen for this

item.

2Item in brackets This indicates the current setting for the item.

3Item displayed in white This indicates an item can be selected.

4Item displayed in gray This indicates that the item cannot be selected. There are various reasons why items cannot be

selected, but the main reasons are as follows: Nothing is connected to the selected input terminal. The function is not compatible with the current input

signal.

NOTE

Menu options differ in the selected input modes, but theoperating procedures are the same.

The screens in the operation manual are for explanation

purposes (some are enlarged, others cropped) and mayvary slightly from the actual screens.

Option

Audio Only

AQUOS LINK Setup

Digital Noise Reduction

Input Select

Color System

[Off]

[VIDEO]

Output select [Fixed]

[Auto]

[No]Program Title Display

[Off]Game Play Time

[Off]Operation Lock Out

Digital Caption Info.

Caption Setup

21

Basic adjustment settings

Menu operation buttons

Using the remote controlUse the following buttons on the remote control tooperate the menu.

MENU: Press to open or close the menu screen.

a/b/c/d:Press to select a desired item on thescreen or adjust a selected item.

ENTER: Press to go to the next step or completethe setting.

RETURN: Press to return to the previous step.

Example

The bar above is an operational guide forthe remote control. The bar will change inaccordance with each menu setting screen.

Using the control panel of the main unitYou can also operate the menu with the control panelof the main unit.Button operations on the control panel correspond tothe ones on the remote control as shown below.

MENU:MENUon the remote control.INPUT:ENTERon the remote control.CHr/s:Cursorb/aon the remote control.

VOLk/l:Cursorc/don the remote control.

8/10/2019 Sharp LC42_46_52D64U

24/71

Picture Picture

22


Menu items for TV/INPUT 1/2/3 Menu items for HDMI/PC-IN

Audio

Treble .......................................................................... Page 28Bass ............................................................................. Page 28Balance ........................................................................ Page 28Surround ...................................................................... Page 29Bass Enhancer ............................................................ Page 29Reset ........................................................................... Page 28

NOTE

Some menu items may not be displayed depending on theselected input source.

OPC .............................................................................. Page 26Backlight ..................................................................... Page 26

Contrast ...................................................................... Page 26Brightness .................................................................. Page 26Color ........................................................................... Page 26Tint .............................................................................. Page 26Sharpness .................................................................. Page 26Advanced

C.M.S.-Hue ..................................................... Page 27C.M.S.-Saturation .......................................... Page 27Color Temp. .................................................... Page 27Active Contrast ............................................... Page 27Fine Motion ...................................................... Page 27I/P Setting ........................................................ Page 27Film Mode ....................................................... Page 283D-Y/C ............................................................ Page 28Monochrome ................................................... Page 28Range of OPC ................................................. Page 28

Reset ........................................................................... Page 26

Audio

Treble .......................................................................... Page 28Bass ............................................................................. Page 28Balance ........................................................................ Page 28Surround ...................................................................... Page 29Bass Enhancer ............................................................ Page 29Reset ........................................................................... Page 28

OPC .............................................................................. Page 26Backlight ..................................................................... Page 26

Contrast ...................................................................... Page 26Brightness .................................................................. Page 26Color ........................................................................... Page 26Tint .............................................................................. Page 26Sharpness .................................................................. Page 26Advanced

C.M.S.-Hue ..................................................... Page 27C.M.S.-Saturation .......................................... Page 27Color Temp. .................................................... Page 27Active Contrast ............................................... Page 27Fine Motion ...................................................... Page 27I/P Setting ........................................................ Page 27Film Mode ....................................................... Page 28Monochrome ................................................... Page 28Range of OPC ................................................. Page 28

Reset ........................................................................... Page 26

Power Control

No Signal Off ............................................................... Page 29

No Operation Off ........................................................ Page 29

Power Control

No Signal Off ............................................................... Page 29

No Operation Off ........................................................ Page 29

Setup

EZ Setup ...................................................................... Page 23CH Setup ..............................................................Pages 23-24Antenna Setup-DIGITAL............................................. Page 24Input Skip .................................................................... Page 31Input Label ................................ ................................. Page 34Parental CTRL ......................................................Pages 41-47Position........................................................................ Page 33Language..................................................................... Page 33Reset ............................................................................ Page 33

Setup

Input Skip .................................................................... Page 31Input Signal ................................................................. Page 38Auto Sync. ................................................................... Page 32Input Label ................................................................. Page 34Fine Sync. .................................................................... Page 32Position........................................................................ Page 33Language..................................................................... Page 33Reset ............................................................................ Page 33

Option

AQUOS LINK Setup .............................................Pages 54-57Audio Only ................................................................... Page 37Digital Noise Reduction ............................................. Page 37HDMI Setup ................................................................. Page 31Output Select .............................................................. Page 37Game Play Time .......................................................... Page 37Operation Lock Out .................................................... Page 37

Option

AQUOS LINK Setup .............................................Pages 54-57Audio Only ................................................................... Page 37Digital Noise Reduction ............................................. Page 37Input Select ................................................................. Page 30Output Select .............................................................. Page 37Color System .............................................................. Page 37Caption Setup ............................................................. Page 40Digital Caption Info. ................................................... Page 40Program Title Display ................................................ Page 37Favorite CH ................................................................. Page 25Game Play Time .......................................................... Page 37Operation Lock Out .................................................... Page 37

Digital Setup

Audio Setup ................................................................. Page 47Identification ............................................................... Page 47Software Update ..................................................Pages 48-49

Digital Setup

Software Update ..................................................Pages 48-49

8/10/2019 Sharp LC42_46_52D64U

25/71

23


Press MENUto display the MENU screen, andthen pressc/dto select Setup.

Pressa/bto select EZ Setup, and thenpress ENTER.

If you already set the Secret No., go to step 3. Ifnot, skip to step 4.

Input the 4-digit secret number by using 09.


Pressc/dto select Air or Cable.Press ENTERto enter the setting.

Antenna setting

Make sure what kind of connection is made with your

TV when selecting Air or Cable.

Channel search


NOTE

If no channel is found, confirm the type of connection madewith your TV and try EZ Setup again.

If you select Analog Search Start and initiate the channelsearch, the CH Memory for Cable Digital will be deleted.

EZ Setup

You can run EZ Setup again, even after setting up thepreset channels.

Channel Setup

If initial setup does not memorize all the channels inyour region, follow the instructions below to manuallymemorize the channels.

Antenna settingPress MENUto display the MENU screen, andthen pressc/dto select Setup.

Pressa/bto select CH Setup, and thenpress ENTER.

If you already set the Secret No., input the 4-digitsecret number here. See page 41 for setting asecret number.

Pressc/dto select Air or Cable.Press ENTERto enter the setting.

Pressa/bto select Air/Cable, and thenpress ENTER.

Channel search


Repeat steps 1 and 2 in Antenna setting in

Channel Setup.

Pressa/bto select CH Search, and thenpress ENTER.

NOTE

If no channel is found, confirm the type of connection madewith your TV and try channel search again.

If you select Analog Search Start and initiate the channelsearch, the CH Memory for Cable Digital will be deleted.

1

2

3

4

5

6

1

2

3

4

1

2



When Cable is selected in Antenna

setting:Pressa/bto select Analog & Digital SearchStart to search both analog and digitalbroadcasts or Analog Search Start to searchonly analog broadcasts, and then pressENTER.





When Cable is selected in Antennasetting:

Pressa/bto select Analog & Digital Search

Start to search both analog and digitalbroadcasts or Analog Search Start to searchonly analog broadcasts, and then pressENTER.



3

Press MENUto exit.7

Press MENUto exit.4

Press MENUto exit.5

Language setting

Select from among 3 languages: English, French andSpanish.

8/10/2019 Sharp LC42_46_52D64U

26/71

Signal Strength

Channel Strength

Signal Strength

Current Max0 0

Signal Strength

Current

CH

Max0

1 2

0

Signal Strength

Channel Strength

24


Antenna Setup - DIGITAL

In order to receive digital air broadcasts, you needa digital broadcast antenna. You can confirm theantenna configuration through the Antenna Setup -DIGITAL screen.

If necessary, adjust the direction of the antenna toobtain the maximum signal strength.

Signal Strength

On: Skips channels. (Channel selection disabled using CHr/s.)

Off: Does not skip channels. (Channel selection enabledusing CHr/s.)

Pressa/bto select ANALOG (Air), ANALOG

(Cable), DIGITAL (Air) or DIGITAL (Cable), andthen press ENTER.

When viewing ANALOG broadcasts:

1Pressc/dto select the channel to skip,and then pressbto move down.

2Pressc/dto select On, and then pressENTER.

When viewing DIGITAL broadcasts:

1Pressa/bto select the channel to skip,and then pressc/dto select On.

Press MENUto display the MENU screen, and

then pressc/dto select Setup.

Pressa/bto select CH Setup, and thenpress ENTER.


Pressa/bto select CH Memory, and thenpress ENTER.

Channel memory setting


Pressa/bto select Antenna Setup -DIGITAL, and then press ENTER.

Channel Strength

The channel signal strength can also be checkedseparately.

Repeat steps 1 and 2 in Signal Strength inAntenna Setup - DIGITAL.

Input the 2-digit channel number to check the

signal strength of the selected channel. Make sure the signal is strong enough for each

channel.

Pressa/bto select Channel Strength, andthen press ENTER.

Pressa/bto select Signal Strength. The signal strength of DIGITAL channel is

displayed. The signal information is based on thecurrent channel.

NOTE

This function is available for DIGITAL (Air) only.

1

2

3

4

5

1

2

3

1

2

3

NOTE

Make sure what kind of connection is made with your TV.

Press MENUto exit.6

Press MENUto exit.4

Press MENUto exit.

4

8/10/2019 Sharp LC42_46_52D64U

27/71

Air

3Air

18

Air

10.1

A B C D

Air

3

A B C D

Air

10.1

Yes No

25


Favorite channel setting

This function allows you to program 4 favoritechannels, in 4 different categories. By setting thefavorite channels in advance, you can select yourfavorite channels easily.

Pressa/b/c/dto select the position in the

category, and then press ENTERto register.

Select the channel you want to register as afavorite channel.

PressFAVORITE.

Pressa/bto select Register, and thenpress ENTER.

Deleting a favorite channel

Press FAVORITEand the favorite channelscreen displays.

Pressa/bto select 1 Data Clear, and thenpress ENTER.

To delete all the favorite channels, select All DataClear, and then skip to step 4.

Pressa/b/c/dto select the channel youwant to delete, and then press ENTER.

Pressc/dto select Yes, and then pressENTER.

1

2

4

3

1

2

4

3

Air

3

A B C D

Using FAVORITE CH on the remote control unit

Using Favorite CH on the menu screen

You can also set your favorite channels in Option onthe MENU screen.

Select the channel you want to register as afavorite channel.1

Press MENUto display the MENU screen, andthen pressc/dto select Option.

Pressa/bto select Favorite CH, and thenpress ENTER.

2

3

Pressa/bto select Register, and thenpress ENTER.4

Pressa/b/c/dto select the position in thecategory, and then press ENTERto register.5

Deleting a favorite channel

Repeat steps 2 and 3 in Using Favorite CHon the menu screen.1

Pressa/bto select 1 Data Clear, and thenpress ENTER.

To delete all the favorite channels, select All DataClear, and then skip to step 4.

2

Pressa/b/c/dto select the channel youwant to delete, and then press ENTER.3

Pressc/dto select Yes, and then pressENTER.4

Press MENUto exit.6

Press MENUto exit.5

8/10/2019 Sharp LC42_46_52D64U

28/71

Picture Audio

Contrast

OPC

Brightness

Color

Tint

Sharpness

Advanced

Reset

[b30]

[ 0]

[ 0]

[ 0]

[ b2]

0

a30

a30

a30

a10

b40

b30

b30

b30

b10

Backlight [b12] a16 b16

Off On On : Display

26


Picture adjustments

Adjusts the picture to your preference with thefollowing picture settings.

NOTE

For resetting all Picture adjustment items to the factorypreset values, pressa/bto select Reset, press ENTER,pressc/dto select Yes, and then press ENTER.

NOTE

Select Advanced and then press ENTERto set C.M.S.-

Hue, C.M.S.-Saturation, Color Temp., ActiveContrast, Fine Motion, I/P Setting, Film Mode, 3D-Y/C, Monochrome or Range of OPC. See pages 27 and28.

OPC setting

Automatically adjusts the brightness of the screen.

NOTE

When set to On, the OPC senses the surrounding lightand automatically adjusts the backlight brightness. Makesure nothing obstructs the OPC sensor, which could affectits ability to sense surrounding light.

When set to On: Display, OPC effect displays on the

screen while the OPC adjusts the screen brightness.

Pressa/bto select a specific adjustmentitem.

Pressc/dto adjust the item to the desiredlevel.

Press MENUto display the MENU screen, andthen pressc/dto select Picture.

Press MENUto display the MENU screen, andthen pressc/dto select Picture.

Pressa/bto select OPC.

Pressc/dto select On or On: Display.

1

3

2

1

3

2

Press MENUto exit.4

Press MENUto exit.4

Selected item

Backlight

Contrast

Brightness

Color

Tint

Sharpness

cbutton

The screen dims

For less contrast

For less brightness

For less colorintensity

Skin tones becomereddish

For less sharpness

dbutton

The screenbrightens

For more contrast

For more brightness

For more colorintensity

Skin tones becomegreenish

For more sharpness

Selected item

Off

On

On: Display

Description

The brightness is fixed at the value set inBacklight.

Automatically adjusts

Displays the OPC effect on the screen

while adjusting the brightness of thescreen.

8/10/2019 Sharp LC42_46_52D64U

29/71

27

Advanced picture adjustments

This TV provides various advanced functions foroptimizing the picture quality.


then pressc/dto select Picture.

Pressa/bto select Advanced, and thenpress ENTER.

Pressa/bto select a specific adjustmentitem, and then press ENTER.

You can select C.M.S.-Hue, C.M.S.-Saturation,Color Temp., Active Contrast, FineMotion, I/P Setting, Film Mode, 3D-Y/C,Monochrome, or Range of OPC.

Pressa/b(orc/d) to select the desiredparameter.

See the table for the selectable parameters.

1

3

2

4

Press MENUto exit.5

Active Contrast

Automatically adjusts the image contrast according tothe scene.

Color Temperature

For a better white balance, use color temperaturecorrection.


Selected item

HighMid-HighMiddleMid-LowLow

Description

White with Bluish tone

White with Reddish tone

Selected item

On

Off

Description

Automatically adjusts the image contrast

No adjustment

NOTE

Fine Motion may cause image noise. If this occurs turn thefunction Off.

Selected item

On

Off

Description

For obtaining a clearer image

Normal image

Fine Motion

Use Fine Motion to view fast-action video more clearly.C.M.S. (Color Management System)

Color tone is managed using the six-color adjustmentsetting.

Selected item

C.M.S.-Hue

C.M.S.-Saturation

Description

This is a standard to adjust the color eithermore reddish or more bluish in tone.

Increases or decreases the saturation of aselected color.

NOTE

For resetting all adjustment items to the factory presetvalues, pressa/bto select Reset, and then pressENTER.

I/P Setting

Converts input signals depending on the type ofimages.

Selected item

Fast

Slow

Description

Suitable for fast-moving images

Suitable for smooth images with lowamounts of flickers

NOTE

"I/P Setting" is not selectable when channel display showsan input resolution of 480P, 720P, or 1080P.

8/10/2019 Sharp LC42_46_52D64U

30/71

Audio Power Control

Treble

Bass

Balance

Surround

Bass Enhancer

Reset

[Off]

[On]

a15

L

b15

[ 0]

[ 0]

[ 0]

a15 b15

R

28

Sound adjustment

You can adjust the sound quality to your preferencewith the following settings.


Pressc/dto adjust the item to the desiredlevel.

NOTE

Audio menu is grayed out when Output Select is set toVariable.

For resetting all Audio adjustment items to the factory

preset values, pressa/bto select Reset, press ENTER,pressc/dto select Yes, and then press ENTER.

Press MENUto display the MENU screen, andthen pressc/dto select Audio.

Pressa/bto select a specific adjustmentitem.

1

2

3

Press MENUto exit.4

Selected item

Treble

Bass

Balance

cbutton

For weaker treble

For weaker bass

Decrease audio fromthe right speaker

dbutton

For stronger treble

For stronger bass

Decrease audiofrom the leftspeaker

Film Mode (3:2 pull-down)

Automatically detects a film-based source (originallyencoded at 24 frames/second), analyzes it then recreateseach still film frame for high-definition picture quality.

Selected item

On

Off

Description

Detects, analyzes, converts film source

Normal viewing mode

3D-Y/C

Provides high quality images with minimal dot crawl

and cross color noise.

NOTE

3D-Y/C is available for input signal from Composite Video

and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

Selected item

Slow

Standard

Fast

Off (2D)

Description

For still images

Normal adjustment

For moving images

For Game Mode

Selected item

On

Off

Description

For viewing in monochrome

Normal color

NOTE

Film Mode does not function when you set the AV Modeto Game.

Film Mode is not selectable when channel display showsan input resolution of 480P, 720P, or 1080P.

Range of OPC

The brightness level range of the OPC sensor's automatic

adjustments can be set according to your preferences.The adjustment range of the OPC sensor can be set to amaximum ofe16 and a minimum of f16.

NOTE

The range of OPC settings are active only when the OPC isset to On.

The maximum setting cannot be set to a smaller numberthan the minimum setting.

The minimum setting cannot be set to a bigger numberthan the maximum setting.

Depending on the brightness of the surrounding light, theOPC sensor might not operate if the adjustment range issmall.

Selected item

Max.

Min.

Description

f15 throughe16

f16 throughe15

8/10/2019 Sharp LC42_46_52D64U

31/71

DisableEnable

4

29

Surround

Surround function allows you to enjoy realistic livesound.

NOTE

You can choose Surround by pressing SURROUNDonthe remote control unit. (See page 19.)


For some discs, setup may be required on your DVDplayer. In this case, please refer to the operation manual ofyour DVD player.


then pressc/dto select Audio.

Pressa/bto select Surround, and thenpress ENTER.

Pressc/dto select On, and then pressENTER.

1

3

Press MENUto exit.4

Power Control

Power control setting allows you to save energy.

No signal off

When set to Enable, the power will automatically shut

down if there is no signal for 15 minutes.

NOTE

Disable is the factory preset value. When a TV program finishes, this function may not operate.

NOTE

Disable is the factory preset value.

No operation off

When set to Enable, the power will automatically shutdown if there is no operation for 3 hours.

Press MENUto display the MENU screen, andthen pressc/dto select Power Control.

Pressa/bto select No Operation Off, andthen press ENTER.

Pressc/dto select Enable, and then pressENTER.

Five minutes before the power shuts down, theremaining time displays every minute.


1

3

2

1

2

3

Press MENUto exit.4

Press MENUto exit.

Press MENUto display the MENU screen, andthen pressc/dto select Power Control.

Pressa/bto select No Signal Off, and thenpress ENTER.

Pressc/dto select Enable, and then pressENTER.

Five minutes before the power shuts down, theremaining time displays every minute.

2

Bass Enhancer

This function allows you to enjoy bass-enhancedsound.

Press MENUto display the MENU screen, andthen pressc/dto select Audio.1

Pressa/bto select Bass Enhancer, andthen press ENTER.

2

Pressc/dto select On, and then pressENTER.3

Press MENUto exit.4

NOTE


8/10/2019 Sharp LC42_46_52D64U

32/71

Auto

COMPONENT

VIDEO

Option

Input Select

Output Select

Audio Only


[Fixed]

[Off]

[Auto]

AQUOS LINK Setup

30

Using external equipment

Displaying an external equipmentimage

To view external source images, select the inputsource from INPUTon the remote control unit or onthe TV.

Input Select

If the image does not come in clearly from the externalequipment connected to INPUT 1 or 3, you may needto change the input signal type setting on the InputSelect menu.

Pressa/bto select the signal type you wantto set, and then press ENTER.

If the selected signal type is incorrect, images arenot displayed or displayed without any color.


Pressa/bto select Input Select, and thenpress ENTER.

NOTE

Refer to your external equipment operation manual for thesignal type.

If you set INPUT 1 or 3 to Auto, the TV will automaticallyselect the input signal.

Setting INPUT 1 or 3 signal selection to Auto whenother equipment is connected will result in the followingconnection priority.

INPUT 1 or 3: 1COMPONENT VIDEO 2VIDEO

Press MENUto exit.

The setting is stored and can be selected on theINPUT SOURCE menu.

NOTE

See pages 13 to 15 for external equipment connection.

Press INPUT.

A list of selectable sources appears.

Press INPUTagain to select the input source.

An image from the selected source automaticallydisplays.

Each time INPUTis pressed, the input source

toggles. You can also select the input source by pressinga/b.

If the corresponding input is not plugged in, youcannot change the input. Be sure to connect theequipment beforehand.

1

2

1

3

2

4

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

INPUT6

INPUT7

8/10/2019 Sharp LC42_46_52D64U

33/71


Output Select

Audio Only

[Fixed]

HDMI Setup

[Low]

Input 4 (HDMI)

Input 5 (HDMI)

Input 6 (HDMI)

Input 7 (RGB)

Yes No

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

INPUT6

INPUT7

31

Displaying an image from HDMIequipment

To watch an HDMI or PC-IN equipment image,select INPUT4, INPUT5 or INPUT 6 from

INPUT SOURCE menu using INPUTon theremote control unit or on the TV.


Pressa/bto select HDMI Setup, and thenpress ENTER.

1

2

3

Pressa/bto select the desired item, andthen press ENTER.4

Input Skip

This setting allows you to skip the HDMI or PC-IN Inputon the Input Selection operation.

Pressa/bto select Input Skip, and thenpress ENTER.


then pressc/dto select Setup.1

2

Press MENUto exit.

Pressa/bto select the Input (INPUT 4,INPUT 5, INPUT 6 or INPUT 7) you wish toskip, and then press ENTER.


3

4

5

6Press MENUto exit.

NOTE

Refer to your external equipment operation manual for thesignal type.

Audio Select is only available for INPUT 6. When connecting an HDMI-DVI conversion adapter/cable

to the HDMI terminal, the image may not come in clearly.

Pressc/dto select the desired setting, andthen press ENTER.5

Enable

Disable

DigitalAnalog

Set whether or not to use

View Mode based on signalrecognition, including an HDMIsignal.

Select Digital for an audiosignal via the HDMI terminal.Select Analog for an audiosignal via the R-AUDIO -Lterminal.

Auto View

AudioSelect

HDMISetupitems

Selectableitems

Description

Using external equipment

8/10/2019 Sharp LC42_46_52D64U

34/71

Auto Sync. adjustment (for AnalogPC input mode only)

For automatically adjusting the PC image.

Pressa/bto select Auto Sync., and thenpress ENTER.

Press MENUto display the MENU screen, andthen pressc/dto select Setup.1

2

Pressc/dto select Yes, and then pressENTER. Auto Sync. starts and Now adjusting the image.

displays.

Press MENUto exit.

3

4

Useful adjustment settings

Reset

H-Pos. [ 90] a b

a b

a b

a b

V-Pos.

Clock

Phase

[ 39]

[ 90]

[ 20]

Fine Sync. adjustment

Ordinarily you can easily adjust the picture asnecessary to change image position using Auto Sync.In some cases, however, manual adjustment is neededto optimize the image.

Pressa/bto select Fine Sync., and thenpress ENTER.

Press MENUto display the MENU screen, andthen pressc/dto select Setup.1

2

Press MENUto exit.

Pressa/bto select the specific adjustmentitem.

Pressc/dto adjust the item to your desiredposition.

3

4

5

NoYes

30%

Selected item

H-Pos.

V-Pos.

Clock

Phase

Description

Centers the image by moving it to the leftor right.

Centers the image by moving it up or

down.

Adjust when the image flickers with verticalstripes.

Adjust when characters have low contrastor when the image flickers.

32

NOTE

When Auto Sync. is successful, Completed displays. Ifnot, Auto Sync. failed.

Auto Sync. may fail even if Completed displays. Auto Sync. may fail if the computer image has low

resolution, has unclear (black) edges, or is moved whileexecuting Auto Sync.

Be sure to connect the PC to the TV and switch it onbefore starting Auto Sync.

NOTE

For resetting all Fine Sync. adjustment items to the factorypreset values, pressa/bto select Reset, and thenpress ENTER.

It is not necessary to adjust the Clock or Phase when adigital signal is being input, so it cannot be selected.

The default cursor position may not be in the center,because the screen position variable ranges may beasymmetrical.

The screen position variable ranges depend on the ViewMode or the signal type. The ranges can be seen on theposition-setting screen.

8/10/2019 Sharp LC42_46_52D64U

35/71

Now initializing...

33


Reset

If complex adjustments are made and the settingscannot be restored to normal, you can reset thesettings to the factory preset values.


Now, TV will restart automatically. OK? displayson the screen.


Pressa/bto select Reset, and then pressENTER.


Return to the factory preset values displays onthe screen.

1

3

2


Now initializing... displays on the screen andblinks.

After the reset has completed, the power shutsoff and then comes back on. The screen will havereturned to its original settings.

4

NOTE

The Channel Setup settings will not be changed. The Language settings will not be changed. The Secret number settings will not be changed.



Pressa/bto select Language, and thenpress ENTER.

1

3

2

Press MENUto exit.4

Language setting

You can also select a language from the Setup menu.Select from among 3 languages: English, French andSpanish.

Reset

H-Pos. a b

V-Pos. a b[ 0]

[ 0]

Pressa/bto select H-Pos. or V-Pos..

Pressc/dto adjust the item to the desiredposition.

NOTE

For resetting adjustments to the factory preset values,pressa/bto select Reset, and then press ENTER.

When connecting a PC to the HDMI terminal, the imageposition will be automatically adjusted. It cannot bemanually adjusted.

The screen position variable ranges depend on the ViewMode or the signal type. The ranges can be seen on theposition-setting screen.

Adjustments are stored separately according to inputsource.

Image position

For adjusting a picture's horizontal and verticalposition.

Pressa/bto select Position, and thenpress ENTER.


then pressc/dto select Setup.

1

3

2

4

PressMENU

to exit.5

Example

Selected item

H-Pos.

V-Pos.

Description

Centers the image by moving it to the leftor right.

Centers the image by moving it up ordown.

8/10/2019 Sharp LC42_46_52D64U

36/71

Sleep Timer: Remaining 30

Off 30 60

120 90

34

Input Label

Lets you set the input terminal displayed when usingthe INPUT SOURCE menu or channel display.


Pressa/b/c/dto select the new name forthe input mode, and then press ENTER.

Example

NOTE

You cannot change labels if the INPUT SOURCE is TV.

Press INPUTto select the desired inputsource.


Pressa/bto select Input Label, and thenpress ENTER.

1

2

3

4

Press MENUto exit.5

Sleep Timer

Allows you to set a time when the TV automaticallyswitches to standby.

1

2

Press SLEEP.

The remaining time displays when the sleep timerhas been set.

Each time you pressSLEEP, the remainingtime switches as shown below.

When set, the time automatically starts countingdown.

If you want to adjust the sleep timer, you canpress SLEEPtwice then change the time setting.

Five minutes before the time expires, theremaining time displays every minute.

NOTE

Select Off by pressing SLEEPto cancel the sleep timer. The TV will enter standby when the remaining time reaches

zero. When the sleep timer is set, its indicator on the TV lights

red.

INPUT SOURCE

TV

DVD

INPUT2

INPUT3

INPUT4

INPUT5

INPUT6

INPUT7

8/10/2019 Sharp LC42_46_52D64U

37/71

View ModeSide Bar

S. Stretch

Zoom

Stretch

35


PressVIEW MODEora/bwhile the ViewMode menu is displayed to select a desireditem on the menu.

You can sequentially select a View Mode that has

its own aspect ratio.

View Mode for 4:3 Programs

Stretch:This mode is useful for 1.78:1DVDs.When viewing 1.85:1 DVDs, stretchmode will still show very thin blackbands at the top and bottom of thescreen.

PressVIEW MODE.

The View Mode menu displays. The menu lists the View Mode options selectable

for the type of video signal currently beingreceived.

Side Bar:Suitable for viewing conventional4:3 programs in their normalformat.

S.Stretch (Smart stretch):Suitable for stretching 4:3programs to fill the screen.

Zoom:Suitable for viewing wide-screen2.35:1 anamorphic DVDs in fullscreen.

1

2

sharp lc42_46_52d64u

Documents