shopsabre rc series

8/14/2019 ShopSabre RC Series

1/7

Professional CNC plasma and router cutting

tables for metal, wood and plastic

RC Series 36364860

4896 4814


2/7

Our systems arenot designed tobe one or twoproject a weekmachines.

You can run them 24 hoursa day 5 days a week oreven more.You the owner/operator shouldbe able to go to the machine,turn it on, and go to work. No

squaring or alignment shouldbe required. Chinese Importsand Kit Machines might play thesmoke and mirrors game butin the end you will nd yourselfshopping again.

Solid steel tube and plateframeworkShopSabre uses only top-rated steel tubesand steel plate. We do not use any extrudedaluminum or angle iron in our machine frames.Our systems are solid steel welded and nocustomer assembly is required.

ShopSabre uses only high-precision componentsWe use 25MM linear guide rails with triple

wiper linear guide bearing blocks. We use 2bearing blocks on each rail to assure the cutforces are equally distributed over the rail toreduce the amount of wear and noise. Thetriple sealed bearing blocks assure that nomatter how much debris and dust build up onthe rails you will not get failure to the bearings.The design also makes the machine a self-cleaning system without the worry of wipingdown the rails or watching for build up. On ourShopSabre Routers the motion on all 3 of ouraxes are driven by high precision Ball Screws

with the highest diameters in our market. TheShopSabre Ball Screws also have Anti-Backlashball nuts mounted in angular contact bearingblocks to assure the highest accuracy possible.The ShopSabre CNC drives are all driven by1200 Oz/Inch Advanced Micro Stepper motorsor A/C Digital Super Servo Drives with matchingAmpliers.


3/7

Professional-grade CNCcontrollerShopSabre uses the best of both worlds whenit comes to a controller. We use an IndustrialController that has been conveniently installed into aPC Controller to give you the most control over yourCNC system with the ease of running a computer.Our system does not connect to the machine with acheap printer port or USB cable. We use a true CNC

grade Industrial Connection via a 37 Pin connection.The ShopSabre has over 300GB of AT MACHINESTORAGE available and you can load your CADsoftware on the machine computer, eliminating theneed to walk to a workstation to make changes to ale.

The ShopSabre requires NO special training. It hasa built in microprocessor that ONLY drives yourCNC machine, while the PC processor runs the PCand any programs you might have running. TheShopSabre CNC controller has 4 USB drive ports to

assure you can plug in your ash drives and externalhard drives.

The ShopSabre CNC system comes with Ethernetand Network capabilities. It has EVERY capabilitythat our competitors with standalone controllershave, and many more that competitors cannotoffer (even on competing machines costing$100,000.00). The ShopSabre PC Controller isdust and dirt protected and designed to be usedin a working environment. The Controller updateswith Windows so you will never run into a problemwith compatibility, and all updates are FREE for the

lifetime of the equipment.

ShopSabre has an answer forany budgetWe can build a CNC system that only has mountingbrackets so you can provide your own cutting head,or we can put on a Fully Functional Tool Changer.We provide 3.25HP Porter Cable Routers, 2Hp HSD

Spindles, 4Hp HSD Spindles, 5 Hp HSD Auto Tool ChaSpindles, 9Hp HSD Spindles, and ofcourse the 10HP Tool Changer Spindles. We have even larger spindles those of you who need the power. All our spindles comstandard with a Variable Frequency Drive (VFD) to conspindle RPM ranging from 2,000-24,000 depending onmodel (ask sales for details).

ShopSabre also has Tool Changers that range from 3all the way to 20 tools depending on your needs. Dontfooled by competitors quotes. Many only provide you w

the Tool Changer head and 1 tool position.

ShopSabre does not cut cornersIf you purchase a 5 position Tool Changer you get 5complete positions, which include all the wrenches, cocones and tool forks. Yeseven the wrenches are inclThis goes for any number of positions. ShopSabre alsocan attach a Tool Measure switch with ANY number of positions so you are not limited to the number of tools can have.

ShopSabre Benefts List ShopSabre puts additional time and money into assuring thaCNC system is 100% TESTED prior to leaving our facility so yoube the tester in the eld. The ShopSabre is designed to drop intobuilding and go to work.

ShopSabre puts more time and effort into assure each mounbracket and spindle plate is machined to exacting specs for increaccuracy and better tments to assure you do not get any bindinexcessive wear.

ShopSabre CNC uses High Grade CNC wiring that is specidesigned for the type of work a CNC system does. It can bend amove all day without having any issues, and the anti-interferencecoating assures the wires are less likely to have interference fromelectronic equipment in your shop for the highest accuracy possMany competitors use cheap wire that can be purchased off the less money, but they still charge comparable pricing. Dont be focompanies who dont build quality into their systems.

Unlike many competitors that offer Laser calibrations by requwe do this as a part of EVERY build to assure our machines are accurate as possible.

ShopSabre CNC is fully upgradable. If you want to start with basics and move to the bells and whistles down the road, almostoption (with a few exceptions) can be added after the sale in the

ShopSabre CNC designs our systems to be easy to work on do not need a ShopSabre technician come into your facility to he

benet from low operational cost and a big return on investment

If you do nd yourself in need of help, ShopSabre CNC offerFREE LIFETIME TECH SUPPORT and assistance because wcondent that our machines will last a lifetime.

ShopSabre sales are not paid on commission so the only reafor them to recommend an option is truly to benet your project amachine capabilities. ShopSabre has no reason to encourage yospend more money than you need to up front to perform your job

Dont be fooled by the other systems on the market. We are condent of our machines that we extend an invitation to tour ouand view our ShopSabre CNC machines at work. With prices sta

under $18,000 you cant afford not to check us out!


4/7

Machine Speed Traversing Speed Up to 1500 IPM ( with Servos )

Cutting Speed Up to 500 IPM

Resolution .005

Cutting AreaRC4 52 x 49

RC8 52 x 98

Construction: Table Welded Steel Construction

Gantry Welded Steel Construction

Linear Rails 25mm Precision HiWin Rails

RC4 RC8

Foot Print 63 x 73 x 70 63 x 111 x 70

Weight 1500 Pounds 2000 Pounds

Power Requirements 20amp / 110 Volt

Popular Industries Schools Garage/Hobbyist Sign Makers Light to Medium Duty Shops

PC Control and Software PC included WinCNC 37 pin HI denition cable accepts .dxf orstandard G-Code Vetric VCarve Pro

Product DescriptionThe RC Series was designed for the hobbyist and pricesensitive market. With many lower level machines comingfrom China we felt it was important to give our clients anAmerican option. Many of us have heard of or experiencrsthand the Chinese market, with that in mind ShopSabrcame out with a solution to keep quality and service in miwhile giving you a competitively priced solution. Unlikecompetitive models which are built partially or fully in Chinand imported the ShopSabre is 100% American EngineerManufactured, and supported like they have always been

The RC series is popular in Wood, Plastic, Foam, and mamore materials with low to medium production in mind. Yowill not nd a more durable robust piece of equipment for

less money without cutting corners.

Standard OptionsFully Assembled and Tested

Life-Time Support Via Phone, Email, and PC Connectivit

Vectric VCarve Pro Cad/Cam software

WINCNC Controller Hardware & Software

PC Control Tower with Windows software and 19 MonitoFully Congured Control Box machine mounted

Hiwin Rails and Bearings on X, Y, and Z Axis

Dual Drive Y Axis

Cable Guards and Carriers

CNC Grade Cables built in the USA

2D & 3D Capable

3.25HP Porter Cable Router (Upgrades Available)

Dust Skirt with 4 Exit

Tool Measure Switch

Accepts G-Code or DXF Files direct

HiDenition Control Cabling for Machine Communication

RC SERIES


5/7


6/7

Years ago Jim Bombardo,founder of ShopSabre,had an idea to build a CNCmachine to do crafts forhis wifes business. Jimknew that if he did not

have a machine capable ofproducing parts, he wouldhave many long hours ofback breaking work to do byhand. With a background inengineering and software,he started the project ofbuilding his own CNC

machine.After the initial days and weeks of research,Jim knew that he had to have a system thatwas an industrial design which would providefewer headaches and years of problem-freeservice. His rst machine was a full ball screwdriven machine with industrial componentsthroughout. Now he could produce parts forhours with ease and great precision.

After running the machine for some time,friends and acquaintances saw it and were

amazed by its fully welded construction, power,precision and overall quality. After getting offersto sell it and hours of convincing, Jim sold themachine and decided he would build anotherfor himself. Armed with experience and newideas, the second machine went together morequickly, and Jim was once again convinced tosell it.

During the construction of the third machine,Jim had done further research in the CNCmarket and was amazed that no one offeredan industrial quality machine under $60,000.The only machines on the market were small

bolt-together machines, and the componentsbeing used were simply hobbyist in quality.After seeing everything and doing this research,Jim decided to take this third machine to theWoodworkers show in Atlanta.

During the show he received a lot of attentionand accolades for the machine design. Whenthe show was nished they had over a dozenrequest for orders. Every client was willing towait for the machine as they understood thequality and components put into each one.

After arriving back home, a facility was

constructed for the manufacturing of the newCNC machines, and ShopSabre was born.Jim had started with himself, two brothers, foursons, two cousins and his wife.

ShopSabre is a self-funded company and themachines are constructed from the ground upwith every component being closely monitoredto ensure it works awlessly. ShopSabresphilosophy is simple: Customer Service isEverything. Each machine is tested for hoursbefore it leaves to ensure power, precision,quality and reliability.

Currently there are over 1,000 machinesaround the world in over 19 countries.ShopSabre CNC has experienced enormousgrowth in the past few years, and hasreceived recognition from some of the largestmanufacturers of cabinets, aerospace parts andequipment, signs and many other industries.Business owners and engineers are seeing that

you do not have to spend $100k or more on amachine that can produce precision parts threeshifts a day every day of the week.

ShopSabre is continuing to be on the cuttingedge of CNC technology with the release inJanuary 08 of its fastest and most powerfulmachine under $100,000. ShopSabres abilityto monitor every part of the build cycle andevery industrial component put into the machineeach one is built to perfection before it leavesregardless if it is a router, spindle, laser, plasma,tangential knife or other product.

Jim is still personally involved in theconstruction and assembly of nearly everymachine. With new products in the worksand growth continuing at an astonishing rate,ShopSabre will continue to be a leader inaffordable CNC machines.

26151 Newton CircleElko, Minnesota 55020

Toll Free: 800-493-6021Local: 952-461-4570

WINCNC, Software andMachine

Tech Support: 800-493-602

Hours: 8:00 AM - 5:00 PMCentral Standard Time


7/7

26151 Newton CircleElko, Minnesota 55020Toll Free: 800-493-6021Local: 952-461-4570

WINCNC, Software and MachineTech Support: 800-493-6021

Hours: 8:00 AM - 5:00 PMCentral Standard Time

shopsabre rc series

Documents