short guide to main applications€¦ · short guide to main applications device application...
TRANSCRIPT
2
SMD Film Capacitors
06/2007
Short guide to main applications
Device Application Arcotronics SMD Film proposal Main Competitors SMD Film advantages
TELE
CO
M
Mobile phoneA/D converter
LDB series Ceramic NP0- Low Lock-up time- Narrow tolerance
- No cracking
PLL filteringBluetooth ® PLL filtering LDB series Ceramic NP0
Modem DMT modulation / demodulation LDE / LDB series Ceramic NP0
Base station Filtering LDE / LDB series Ceramic X7R - High stability vs. frequency and temperature- High reliability- No cracking
Line Card Input filtering LDE series Ceramic NP0
Splitter Filtering LDE series Ceramic X7R
AU
TOM
OTI
VE
Wiper Noise suppression LDE series Ceramic X7R
- High stability vs. frequency and temperature- High reliability
- Low ESR- No cracking
Driver information &
car entertainment
Filtering, timing, coupling and decoupling
LDE series Ceramic X7R
Tire pressure monitoring
systemResonant circuit LDE series Ceramic X7R
CO
NSU
MER
DC/DCconverter
Input / output filtering LDE series Ceramic X7R
- High reliability- Low ESR
- No crackingLCD Monitor Inverter unit LDE series Ceramic X7R - High stability vs. frequency
and temperature- High reliability- No cracking
DVD player Filtering LDB series Ceramic NP0PDA Inverter unit LDB series Ceramic NP0
Hi-Fi systems Filtering LDE / LDB series Ceramic X7R
Description:- Non-encapsulated construction- Stacked technology- Metallized PEN (PolyEthylene Naphtalate) in LDE series- Metallized PPS (PolyPhenylene Sulfide) in LDB series- RoHS 6 compliant (no hazardous materials)
Features:- Excellent stability vs. temperature, frequency and time- Self-healing- High reliability- Low ESR (Equivalent Series Resistance)- Typical failure mode at the end of life: open circuit- No piezoelectric effect - No cracking
SMD Film Capacitors are complementary to MLCC for professional applications.
3
SMD Film Capacitors
06/2007
Product codingLDE series - RoHS 6The part number is composed of 15 digits:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
L D E - - - - - - - A - - - 0
Digit 1 to 3 Series code.Digit 4 D.C. rated voltage: (VR) C = 50 VDC D = 63 VDC E = 100 VDC
I = 250 VDC M = 400 VDC P = 630 VDC
Q = 1000 VDC (new version)
Digit 5 Size code (special sizes available upon special request)
12.06 12.10 18.12 22.20 28.24 40.30 50.40 60.54
A B C D E F G H
Digit 6 to 9 Capacitance value Digits 7 - 8 - 9 indicate the first three numbers of the capacitance value, digit 6 indicates the number of zeros that must be added to obtain the rated capacitance in pF.Digit 10 Capacitance tolerance Standard: K = ± 10 % M = ± 20 % (J = ±5% available upon request and review of project/application)Digit 11 Dielectric code A = PENDigit 12 Version 5 = standard 0 = miniature A to Z = specialDigit 13 Packaging N = taped A to Z = specialDigit 14 Internal useDigit 15 0 (used in LDE RoHS 6 series only)
Product packaging
LDB series - RoHS 6The part number is composed of 14 digits:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
L D B - - - - - - - C - - -
Digit 1 to 3 Series code.Digit 4 D.C. rated voltage: (VR) A = 16 VDC
C = 50 VDC
Digit 5 Size code
12.06 12.10 18.12
A B C
Digit 6 to 9 Capacitance value Digits 7 - 8 - 9 indicate the first three numbers of the capacitance value, digit 6 indicates the number of zeros that must be added to obtain the rated capacitance in pF.Digit 10 Capacitance tolerance G = ± 2 % J = ± 5 %Digit 11 Dielectric code C = PPSDigit 12 Version 5 = standard A to Z = special Digit 13 Packaging N = taped A to Z = specialDigit 14 Internal use
Size code
Carrier tape code
Carrier tape dimensions Reel dimensions Packaging quantities
(pcs per reel)A0
[mm]B0
[mm]K0
[mm]W
[mm]P
[mm]T
[μm]Ø
[mm]W1
[mm]W2
[mm]12.06 - 2.00 3.80 1.30 8 4 250 180 8 12 300012.10 - 3.00 3.80 2.10 8 4 250 180 8 12 2250
18.12 a 3.80 5.30 2.00 12 8 300 330 12 16 4000b 3.90 5.20 2.60 3000
22.20a
5.50 6.502.90
12 8 250 330 12 163000
b 3.80 2250c 4.90 1750
28.24a
6.60 7.903.80
16 8 300 330 16 202250
b 4.60 1750c 5.50 1500
40.30a
8.60 11.003.80
16 12 300 330 16 201500
b 4.60 1250c 5.80 1000
50.40a 10.90
13.503.80
24 12 250 330 24 281500
b 10.90 4.70 1250c 11.00 5.90 1000
60.54a
14.40 16.004.30
24 16300
330 24 281000
b 5.10 300 750c 5.80 300 750
In accordance with IEC 60286-3
Materials:- carrier tape: antistatic material- cover tape: polyester + polythene- reel: recyclable polystyrene
All parts in reels are packed in hermetically sealed Moisture Barrier Bag (MBB) Class 1.
SMD Film Capacitor (top view) Tape Reel
4
SMD Film Capacitors
06/2007
PEN and PPS dielectrics typical temperature graphs
PEN
Capacitance vs. temperature
(f = 1 kHz)
PPS
Capacitance vs. temperature
(f = 1 kHz)
-2.0
-1.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
-60 -40 -20 0 20 40 60 80 100 120 140
� C/C [%]
T [°C]
Dissipation factor vs. temperature
(f = 1 kHz)
Dissipation factor vs. temperature
(f = 1 kHz)
Insulation resistance vs. temperature Insulation resistance vs. temperature
5
SMD Film Capacitors
06/2007
PEN and PPS dielectrics typical frequency graphs
Note: measurements performed at T = 25 ± 5 °C
PEN PPS
Capacitance vs. frequency Capacitance vs. frequency
Dissipation factor vs. frequency Dissipation factor vs. frequency
Equivalent Series Resistance vs. frequency Equivalent Series Resistance vs. frequency
PEN and PPS Impedance vs. frequency
6
SMD Film Capacitors
06/2007
Rated cap.
50 VDC / 40 VAC 63 VDC / 40 VAC 100 VDC / 63 VAC 250 VDC / 120 VACRated cap.Size
code
Pcs per reel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number
1000 pF 12.06 3000 1.1 LDECA1100 - A0 - - 0 12.06 3000 1.1 LDEDA1100 - A0 - - 0 12.06 3000 1.1 LDEEA1100 - A0 - - 0 12.06 3000 1.1 LDEIA1100 - A0 - - 0 1000 pF
1200 pF 12.06 3000 1.1 LDECA1120 - A0 - - 0 12.06 3000 1.1 LDEDA1120 - A0 - - 0 12.06 3000 1.1 LDEEA1120 - A0 - - 0 12.06 3000 1.1 LDEIA1120 - A0 - - 0 1200 pF
1500 pF18.12 4000 1.7 LDECC1150 - A5 - - 0 18.12 4000 1.7 LDEDC1150 - A5 - - 0 18.12 4000 1.7 LDEEC1150 - A5 - - 0 18.12 4000 1.7 LDEIC1150 - A5 - - 0
1500 pF12.06 3000 1.1 LDECA1150 - A0 - - 0 12.06 3000 1.1 LDEDA1150 - A0 - - 0 12.06 3000 1.1 LDEEA1150 - A0 - - 0 12.06 3000 1.1 LDEIA1150 - A0 - - 0
1800 pF18.12 4000 1.7 LDECC1180 - A5 - - 0 18.12 4000 1.7 LDEDC1180 - A5 - - 0 18.12 4000 1.7 LDEEC1180 - A5 - - 0 18.12 4000 1.7 LDEIC1180 - A5 - - 0
1800 pF12.06 3000 1.1 LDECA1180 - A0 - - 0 12.06 3000 1.1 LDEDA1180 - A0 - - 0 12.06 3000 1.1 LDEEA1180 - A0 - - 0 12.06 3000 1.1 LDEIA1180 - A0 - - 0
2200 pF18.12 4000 1.7 LDECC1220 - A5 - - 0 18.12 4000 1.7 LDEDC1220 - A5 - - 0 18.12 4000 1.7 LDEEC1220 - A5 - - 0 18.12 4000 1.7 LDEIC1220 - A5 - - 0
2200 pF12.06 3000 1.1 LDECA1220 - A0 - - 0 12.06 3000 1.1 LDEDA1220 - A0 - - 0 12.06 3000 1.1 LDEEA1220 - A0 - - 0 12.06 3000 1.1 LDEIA1220 - A0 - - 0
2700 pF18.12 4000 1.8 LDECC1270 - A5 - - 0 18.12 4000 1.8 LDEDC1270 - A5 - - 0 18.12 4000 1.8 LDEEC1270 - A5 - - 0 18.12 4000 1.8 LDEIC1270 - A5 - - 0
2700 pF12.06 3000 1.1 LDECA1270 - A0 - - 0 12.06 3000 1.1 LDEDA1270 - A0 - - 0 12.06 3000 1.1 LDEEA1270 - A0 - - 0 12.06 3000 1.1 LDEIA1270 - A0 - - 0
3300 pF18.12 4000 1.7 LDECC1330 - A5 - - 0 18.12 4000 1.7 LDEDC1330 - A5 - - 0 18.12 4000 1.7 LDEEC1330 - A5 - - 0 18.12 4000 1.7 LDEIC1330 - A5 - - 0
3300 pF12.06 3000 1.2 LDECA1330 - A0 - - 0 12.06 3000 1.2 LDEDA1330 - A0 - - 0 12.06 3000 1.2 LDEEA1330 - A0 - - 0 12.06 3000 1.2 LDEIA1330 - A0 - - 0
3900 pF18.12 4000 1.7 LDECC1390 - A5 - - 0 18.12 4000 1.7 LDEDC1390 - A5 - - 0 18.12 4000 1.7 LDEEC1390 - A5 - - 0 18.12 4000 1.7 LDEIC1390 - A5 - - 0
3900 pF12.06 3000 1.1 LDECA1390 - A0 - - 0 12.06 3000 1.1 LDEDA1390 - A0 - - 0 12.06 3000 1.1 LDEEA1390 - A0 - - 0 12.10 2250 1.6 LDEIB1390 - A0 - - 0
4700 pF18.12 4000 1.8 LDECC1470 - A5 - - 0 18.12 4000 1.8 LDEDC1470 - A5 - - 0 18.12 4000 1.8 LDEEC1470 - A5 - - 0 18.12 4000 1.8 LDEIC1470 - A5 - - 0
4700 pF12.06 3000 1.1 LDECA1470 - A0 - - 0 12.06 3000 1.1 LDEDA1470 - A0 - - 0 12.06 3000 1.1 LDEEA1470 - A0 - - 0 12.10 2250 1.6 LDEIB1470 - A0 - - 0
5600 pF18.12 4000 1.7 LDECC1560 - A5 - - 0 18.12 4000 1.7 LDEDC1560 - A5 - - 0 18.12 4000 1.7 LDEEC1560 - A5 - - 0 18.12 4000 1.7 LDEIC1560 - A5 - - 0
5600 pF12.06 3000 1.1 LDECA1560 - A0 - - 0 12.06 3000 1.1 LDEDA1560 - A0 - - 0 12.06 3000 1.1 LDEEA1560 - A0 - - 0 12.10 2250 1.6 LDEIB1560 - A0 - - 0
6800 pF18.12 4000 1.7 LDECC1680 - A5 - - 0 18.12 4000 1.7 LDEDC1680 - A5 - - 0 18.12 4000 1.7 LDEEC1680 - A5 - - 0 18.12 4000 1.7 LDEIC1680 - A5 - - 0
6800 pF12.06 3000 1.1 LDECA1680 - A0 - - 0 12.06 3000 1.1 LDEDA1680 - A0 - - 0 12.06 3000 1.1 LDEEA1680 - A0 - - 0 12.10 2250 1.8 LDEIB1680 - A0 - - 0
8200 pF18.12 4000 1.8 LDECC1820 - A5 - - 0 18.12 4000 1.8 LDEDC1820 - A5 - - 0 18.12 4000 1.8 LDEEC1820 - A5 - - 0 18.12 4000 1.8 LDEIC1820 - A5 - - 0
8200 pF12.06 3000 1.1 LDECA1820 - A0 - - 0 12.06 3000 1.1 LDEDA1820 - A0 - - 0 12.06 3000 1.1 LDEEA1820 - A0 - - 0 12.10 2250 2.0 LDEIB1820 - A0 - - 0
0.010 µF18.12 4000 1.7 LDECC2100 - A5 - - 0 18.12 4000 1.7 LDEDC2100 - A5 - - 0 18.12 4000 1.7 LDEEC2100 - A5 - - 0 18.12 4000 1.7 LDEIC2100 - A5 - - 0
0.010 µF12.06 3000 1.1 LDECA2100 - A0 - - 0 12.06 3000 1.1 LDEDA2100 - A0 - - 0 12.06 3000 1.1 LDEEA2100 - A0 - - 0 12.10 2250 2.1 LDEIB2100 - A0 - - 0
0.012 µF18.12 4000 1.7 LDECC2120 - A5 - - 0 18.12 4000 1.7 LDEDC2120 - A5 - - 0 18.12 4000 1.7 LDEEC2120 - A5 - - 0 18.12 4000 1.7 LDEIC2120 - A5 - - 0
0.012 µF12.06 3000 1.1 LDECA2120 - A0 - - 0 12.06 3000 1.1 LDEDA2120 - A0 - - 0 12.06 3000 1.1 LDEEA2120 - A0 - - 0
0.015 µF18.12 4000 1.7 LDECC2150 - A5 - - 0 18.12 4000 1.7 LDEDC2150 - A5 - - 0 18.12 4000 1.7 LDEEC2150 - A5 - - 0 18.12 4000 1.7 LDEIC2150 - A5 - - 0
0.015 µF12.06 3000 1.2 LDECA2150 - A0 - - 0 12.06 3000 1.2 LDEDA2150 - A0 - - 0 12.06 3000 1.2 LDEEA2150 - A0 - - 0
0.018 µF18.12 4000 1.8 LDECC2180 - A5 - - 0 18.12 4000 1.8 LDEDC2180 - A5 - - 0 18.12 4000 1.8 LDEEC2180 - A5 - - 0 22.20 3000 2.2 LDEID2180 - A5 - - 0
0.018 µF12.06 3000 1.1 LDECA2180 - A0 - - 0 12.06 3000 1.1 LDEDA2180 - A0 - - 0 12.10 2250 1.5 LDEEB2180 - A0 - - 0 18.12 4000 1.8 LDEIC2180 - A0 - - 0
0.022 µF18.12 4000 1.7 LDECC2220 - A5 - - 0 18.12 4000 1.7 LDEDC2220 - A5 - - 0 18.12 4000 1.7 LDEEC2220 - A5 - - 0 22.20 3000 2.5 LDEID2220 - A5 - - 0
0.022 µF12.06 3000 1.1 LDECA2220 - A0 - - 0 12.06 3000 1.1 LDEDA2220 - A0 - - 0 12.10 2250 1.5 LDEEB2220 - A0 - - 0 18.12 3000 2.2 LDEIC2220 - A0 - - 0
0.027 µF18.12 4000 1.7 LDECC2270 - A5 - - 0 18.12 4000 1.7 LDEDC2270 - A5 - - 0 18.12 4000 1.7 LDEEC2270 - A5 - - 0 22.20 2250 2.9 LDEID2270 - A5 - - 0
0.027 µF12.06 3000 1.1 LDECA2270 - A0 - - 0 12.06 3000 1.1 LDEDA2270 - A0 - - 0 12.10 2250 1.7 LDEEB2270 - A0 - - 0 18.12 3000 2.5 LDEIC2270 - A0 - - 0
0.033 µF
18.12 4000 1.8 LDECC2330 - A5 - - 0 18.12 4000 1.8 LDEDC2330 - A5 - - 0 18.12 4000 1.8 LDEEC2330 - A5 - - 0 22.20 3000 1.9 LDEID2330 - A5 - - 0
0.033 µF12.10 2250 2.0 LDECB2330 - A0 - - 0 12.10 2250 2.0 LDEDB2330 - A0 - - 0 12.10 2250 2.0 LDEEB2330 - A0 - - 0 18.12 3000 2.6 LDEIC2330 - A0 - - 0
12.06 3000 1.2 *LDECA2330 - A0 - - 0 12.06 3000 1.2 *LDEDA2330 - A0 - - 0
0.039 µF18.12 4000 1.7 LDECC2390 - A5 - - 0 18.12 4000 1.7 LDEDC2390 - A5 - - 0 18.12 4000 1.7 LDEEC2390 - A5 - - 0 22.20 3000 2.1 LDEID2390 - A5 - - 0
0.039 µF12.10 2250 2.1 LDECB2390 - A0 - - 0 12.10 2250 2.1 LDEDB2390 - A0 - - 0 12.10 2250 2.1 LDEEB2390 - A0 - - 0
0.047 µF18.12 4000 1.7 LDECC2470 - A5 - - 0 18.12 4000 1.7 LDEDC2470 - A5 - - 0 18.12 4000 1.7 LDEEC2470 - A5 - - 0 22.20 3000 2.3 LDEID2470 - A5 - - 0
0.047 µF12.10 2250 2.1 LDECB2470 - A0 - - 0 12.10 2250 2.1 LDEDB2470 - A0 - - 0 12.10 2250 2.1 LDEEB2470 - A0 - - 0
LDE Series - PEN dielectric RoHS 6
LOW VOLTAGE (capacitance range: 1000 pF to 0.047 µF)Standard and miniature versions
* only K and M tolerances available
Tolerance - Standard: K = ±10%; M = ±20%; (J = ±5% available upon request and review of project/application)Packaging - N = Taped; A to Z = Special;Internal use
Size code 12.06 12.10 18.12 22.20 28.24 40.30 50.40 60.54
L (mm) 3.3 +0.3- 0.1 3.3 +0.3
- 0.1 4.7 +0.3- 0.2 6.0 ± 0.3 7.3 ± 0.4 10.5 ± 0.4 13.0 ± 0.4 15.5 ± 0.4
W (mm) 1.7 ± 0.2 2.5 ± 0.3 3.3 ± 0.3 5.0 ± 0.4 6.1 ± 0.4 7.9 ± 0.5 10.4 ± 0.5 13.7 ± 0.5
Lead Free
7
SMD Film Capacitors
06/2007
LDE Series - PEN dielectric RoHS 6
LOW VOLTAGE (capacitance range: 0.056 µF to 4.7 µF)Standard and miniature versions
Rated cap.
50 VDC / 40 VAC 63 VDC / 40 VAC 100 VDC / 63 VAC 250 VDC / 120 VAC Rated cap.Size
code
Pcs per reel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number
0.056 µF18.12 4000 1.7 LDECC2560 - A5 - - 0 18.12 4000 1.7 LDEDC2560 - A5 - - 0 18.12 4000 1.7 LDEEC2560 - A5 - - 0 22.20 3000 2.6 LDEID2560 - A5 - - 0
0.056 µF12.10 2250 1.7 LDECB2560 - A0 - - 0 12.10 2250 1.7 LDEDB2560 - A0 - - 0
0.068 µF18.12 4000 1.8 LDECC2680 - A5 - - 0 18.12 4000 1.8 LDEDC2680 - A5 - - 0 18.12 4000 1.8 LDEEC2680 - A5 - - 0 22.20 3000 2.8 LDEID2680 - A5 - - 0
0.068 µF12.10 2250 2.0 LDECB2680 - A0 - - 0 12.10 2250 2.0 LDEDB2680 - A0 - - 0
0.082 µF18.12 3000 2.1 LDECC2820 - A5 - - 0 18.12 3000 2.1 LDEDC2820 - A5 - - 0 18.12 3000 2.1 LDEEC2820 - A5 - - 0 28.24 2250 2.6 LDEIE2820 - A5 - - 0
0.082 µF12.10 2250 2.1 LDECB2820 - A0 - - 0 12.10 2250 2.1 LDEDB2820 - A0 - - 0 22.20 2250 3.5 LDEID2820 - A0 - - 0
0.10 µF18.12 3000 2.4 LDECC3100 - A5 - - 0 18.12 3000 2.4 LDEDC3100 - A5 - - 0 18.12 3000 2.4 LDEEC3100 - A5 - - 0 28.24 2250 2.9 LDEIE3100 - A5 - - 0
0.10 µF12.10 2250 2.1 LDECB3100 - A0 - - 0 12.10 2250 2.1 LDEDB3100 - A0 - - 0 22.20 1750 4.1 LDEID3100 - A0 - - 0
0.12 µF18.12 4000 1.7 LDECC3120 - A5 - - 0 18.12 4000 1.7 LDEDC3120 - A5 - - 0 22.20 3000 2.6 LDEED3120 - A5 - - 0 28.24 2250 3.3 LDEIE3120 - A5 - - 0
0.12 µF22.20 1750 4.4 LDEID3120 - A0 - - 0
0.15 µF 18.12 4000 1.9 LDECC3150 - A5 - - 0 18.12 4000 1.9 LDEDC3150 - A5 - - 0 22.20 3000 1.9 LDEED3150 - A5 - - 0 28.24 1750 3.8 LDEIE3150 - A5 - - 0 0.15 µF
0.18 µF18.12 3000 2.2 LDECC3180 - A5 - - 0 18.12 3000 2.2 LDEDC3180 - A5 - - 0 22.20 3000 2.0 LDEED3180 - A5 - - 0 40.30 1500 2.7 LDEIF3180 - A5 - - 0
0.18 µF28.24 1750 4.4 LDEIE3180 - A0 - - 0
0.22 µF18.12 3000 2.4 LDECC3220 - A5 - - 0 18.12 3000 2.4 LDEDC3220 - A5 - - 0 22.20 3000 2.4 LDEED3220 - A5 - - 0 40.30 1500 3.1 LDEIF3220 - A5 - - 0
0.22 µF28.24 1500 5.2 LDEIE3220 - A0 - - 0
0.27 µF 22.20 3000 1.9 LDECD3270 - A5 - - 0 22.20 3000 1.9 LDEDD3270 - A5 - - 0 22.20 3000 2.8 LDEED3270 - A5 - - 0 40.30 1500 3.7 LDEIF3270 - A5 - - 0 0.27 µF
0.33 µF 22.20 3000 1.9 LDECD3330 - A5 - - 0 22.20 3000 1.9 LDEDD3330 - A5 - - 0 22.20 2250 3.3 LDEED3330 - A5 - - 0 40.30 1250 4.3 LDEIF3330 - A5 - - 0 0.33 µF
0.39 µF22.20 3000 2.1 LDECD3390 - A5 - - 0 22.20 3000 2.1 LDEDD3390 - A5 - - 0 28.24 2250 2.6 LDEEE3390 - A5 - - 0 50.40 1500 3.3 LDEIG3390 - A5 - - 0
0.39 µF22.20 2250 3.7 LDEED3390 - A0 - - 0 40.30 1000 5.0 LDEIF3390 - A0 - - 0
0.47 µF22.20 3000 2.4 LDECD3470 - A5 - - 0 22.20 3000 2.4 LDEDD3470 - A5 - - 0 28.24 2250 3.0 LDEEE3470 - A5 - - 0 50.40 1250 3.8 LDEIG3470 - A5 - - 0
0.47 µF22.20 1750 4.4 LDEED3470 - A0 - - 0 40.30 1000 5.5 LDEIF3470 - A0 - - 0
0.56 µF22.20 3000 2.8 LDECD3560 - A5 - - 0 22.20 3000 2.8 LDEDD3560 - A5 - - 0 28.24 2250 3.5 LDEEE3560 - A5 - - 0 50.40 1250 4.4 LDEIG3560 - A5 - - 0
0.56 µF40.30 1000 5.5 LDEIF3560 M A0 - - 0
0.68 µF22.20 2250 3.3 LDECD3680 - A5 - - 0 22.20 2250 3.3 LDEDD3680 - A5 - - 0 28.24 1750 4.1 LDEEE3680 - A5 - - 0 60.54 1000 3.4 LDEIH3680 - A5 - - 0
0.68 µF50.40 1000 5.2 LDEIG3680 - A0 - - 0
0.82 µF28.24 2250 2.9 LDECE3820 - A5 - - 0 28.24 2250 2.9 LDEDE3820 - A5 - - 0 40.30 1500 2.8 LDEEF3820 - A5 - - 0 60.54 1000 3.9 LDEIH3820 - A5 - - 0
0.82 µF22.20 1750 3.7 LDECD3820 - A0 - - 0 22.20 2250 3.7 LDEDD3820 - A0 - - 0 28.24 1500 4.9 LDEEE3820 - A0 - - 0 50.40 1000 5.7 LDEIG3820 - A0 - - 0
1.0 µF28.24 2250 3.1 LDECE4100 - A5 - - 0 28.24 2250 3.1 LDEDE4100 - A5 - - 0 40.30 1500 3.2 LDEEF4100 - A5 - - 0 60.54 750 4.6 LDEIH4100 - A5 - - 0
1.0 µF22.20 1750 4.4 LDECD4100 - A0 - - 0 22.20 1750 4.4 LDEDD4100 - A0 - - 0 28.24 1500 5.4 *LDEEE4100 - A0 - - 0
1.2 µF28.24 2250 3.6 LDECE4120 - A5 - - 0 28.24 2250 3.6 LDEDE4120 - A5 - - 0 50.40 1500 3.1 LDEEG4120 - A5 - - 0
1.2 µF40.30 1500 3.7 LDEEF4120 - A0 - - 0 60.54 750 5.4 LDEIH4120 - A0 - - 0
1.5 µF50.40 1500 3.1 LDECG4150 - A5 - - 0 50.40 1500 3.1 LDEDG4150 - A5 - - 0 50.40 1500 3.1 LDEEG4150 - A5 - - 0
1.5 µF28.24 1750 4.3 LDECE4150 - A0 - - 0 28.24 1750 4.3 LDEDE4150 - A0 - - 0 40.30 1250 4.5 LDEEF4150 - A0 - - 0 60.54 750 5.7 LDEIH4150 M A0 - - 0
1.8 µF50.40 1500 3.4 LDECG4180 - A5 - - 0 50.40 1500 3.4 LDEDG4180 - A5 - - 0 50.40 1500 3.4 LDEEG4180 - A5 - - 0
1.8 µF28.24 1500 5.1 LDECE4180 - A0 - - 0 28.24 1500 5.1 LDEDE4180 - A0 - - 0 40.30 1000 5.4 LDEEF4180 - A0 - - 0
2.2 µF50.40 1250 4.1 LDECG4220 - A5 - - 0 50.40 1250 4.1 LDEDG4220 - A5 - - 0 50.40 1250 4.1 LDEEG4220 - A5 - - 0
2.2 µF40.30 1500 3.3 LDECF4220 - A0 - - 0 40.30 1500 3.3 LDEDF4220 - A0 - - 0 40.30 1000 5.6 *LDEEF4220 - A0 - - 0
2.7 µF50.40 1000 4.9 LDECG4270 - A5 - - 0 50.40 1000 4.9 LDEDG4270 - A5 - - 0 60.54 1000 3.3 LDEEH4270 - A5 - - 0
2.7 µF40.30 1250 4.0 LDECF4270 - A0 - - 0 40.30 1250 4.0 LDEDF4270 - A0 - - 0 50.40 1000 4.9 LDEEG4270 - A0 - - 0
3.3 µF60.54 1000 3.9 LDECH4330 - A5 - - 0 60.54 1000 3.9 LDEDH4330 - A5 - - 0 60.54 1000 3.9 LDEEH4330 - A5 - - 0
3.3 µF40.30 1000 4.7 LDECF4330 - A0 - - 0 40.30 1000 4.7 LDEDF4330 - A0 - - 0 50.40 1000 5.7 LDEEG4330 - A0 - - 0
3.9 µF60.54 750 4.5 LDECH4390 - A5 - - 0 60.54 750 4.5 LDEDH4390 - A5 - - 0 60.54 750 4.5 LDEEH4390 - A5 - - 0
3.9 µF40.30 1000 5.5 LDECF4390 - A0 - - 0 40.30 1000 5.5 LDEDF4390 - A0 - - 0
4.7 µF60.54 750 5.3 LDECH4470 - A5 - - 0 60.54 750 5.3 LDEDH4470 - A5 - - 0 60.54 750 5.3 LDEEH4470 - A5 - - 0
4.7 µF50.40 1250 4.1 LDECG4470 - A0 - - 0 50.40 1250 4.1 LDEDG4470 - A0 - - 0
* only K and M tolerances available
Lead Free
Size code 12.10 18.12 22.20 28.24 40.30 50.40 60.54
L (mm) 3.3 +0.3- 0.1 4.7 +0.3
- 0.2 6.0 ± 0.3 7.3 ± 0.4 10.5 ± 0.4 13.0 ± 0.4 15.5 ± 0.4
W (mm) 2.5 ± 0.3 3.3 ± 0.3 5.0 ± 0.4 6.1 ± 0.4 7.9 ± 0.5 10.4 ± 0.5 13.7 ± 0.5
Tolerance - Standard: K = ±10%; M = ±20%; (J = ±5% available upon request and review of project/application)Packaging - N = Taped; A to Z = Special;Internal use
8
SMD Film Capacitors
06/2007
LDE SERIES - PEN dielectric RoHS 6
HIGH VOLTAGE (capacitance range: 1000 pF to 0.47 µF)Standard and miniature versions
* only K and M tolerances available
Rated cap.
400 VDC / 160 VAC 630 VDC / 200 VAC 1000 VDC / 250 VACRated cap.Size
code
Pcs perreel
Hmax[mm] Part number Size
code
Pcs perreel
Hmax [mm] Part number Size
code
Pcs per reel
Hmax [mm] Part number
1000 pF 22.20 3000 1.9 LDEPD1100 - A5 - - 0 22.20 3000 1.9 LDEQD1100 - A5 - - 0 1000 pF
1200 pF 22.20 3000 2.0 LDEPD1120 - A5 - - 0 22.20 3000 2.0 LDEQD1120 - A5 - - 0 1200 pF
1500 pF 22.20 3000 2.3 LDEPD1150 - A5 - - 0 22.20 3000 2.3 LDEQD1150 - A5 - - 0 1500 pF
1800 pF 22.20 3000 2.5 LDEPD1180 - A5 - - 0 22.20 3000 2.5 LDEQD1180 - A5 - - 0 1800 pF
2200 pF 22.20 3000 2.0 LDEPD1220 - A5 - - 0 22.20 3000 2.0 LDEQD1220 - A5 - - 0 2200 pF
2700 pF 22.20 3000 2.3 LDEPD1270 - A5 - - 0 22.20 3000 2.3 LDEQD1270 - A5 - - 0 2700 pF
3300 pF 22.20 3000 2.6 LDEPD1330 - A5 - - 0 22.20 3000 2.6 LDEQD1330 - A5 - - 0 3300 pF
3900 pF 22.20 3000 1.9 LDEPD1390 - A5 - - 0 22.20 2250 3.0 LDEQD1390 - A5 - - 0 3900 pF
4700 pF 22.20 3000 2.0 LDEPD1470 - A5 - - 0 22.20 2250 3.4 LDEQD1470 - A5 - - 0 4700 pF
5600 pF 22.20 3000 2.0 LDEPD1560 - A5 - - 0 22.20 1750 3.9 LDEQD1560 - A5 - - 0 5600 pF
6800 pF 22.20 3000 2.3 LDEPD1680 - A5 - - 0 22.20 1750 4.4 LDEQD1680 - A5 - - 0 6800 pF
8200 pF 22.20 3000 2.6 LDEPD1820 - A5 - - 0 28.24 2250 2.9 LDEQE1820 - A5 - - 0 8200 pF
0.010 µF 22.20 2250 3.0 LDEPD2100 - A5 - - 0 28.24 2250 3.4 LDEQE2100 - A5 - - 0 0.010 µF
0.012 µF 22.20 2250 3.4 LDEPD2120 - A5 - - 0 28.24 1750 4.0 LDEQE2120 - A5 - - 0 0.012 µF
0.015 µF 22.20 3000 2.1 LDEMD2150 - A5 - - 0 22.20 1750 4.0 LDEPD2150 - A5 - - 0 28.24 1500 4.9 LDEQE2150 - A5 - - 0 0.015 µF
0.018 µF 22.20 3000 2.2 LDEMD2180 - A5 - - 0 22.20 1750 4.4 LDEPD2180 - A5 - - 0 28.24 1500 5.4 LDEQE2180 - A5 - - 0 0.018 µF
0.022 µF 22.20 3000 2.5 LDEMD2220 - A5 - - 0 28.24 2250 3.4 LDEPE2220 - A5 - - 0 40.30 1500 3.4 LDEQF2220 - A5 - - 0 0.022 µF
0.027 µF 22.20 2250 2.9 LDEMD2270 - A5 - - 0 28.24 1750 4.0 LDEPE2270 - A5 - - 0 40.30 1250 4.0 LDEQF2270 - A5 - - 0 0.027 µF
0.033 µF 22.20 2250 3.4 LDEMD2330 - A5 - - 0 28.24 1500 4.7 LDEPE2330 - A5 - - 0 40.30 1000 4.7 LDEQF2330 - A5 - - 0 0.033 µF
0.039 µF 22.20 1750 3.8 LDEMD2390 - A5 - - 0 28.24 1500 5.3 LDEPE2390 - A5 - - 0 50.40 1500 3.5 LDEQG2390 - A5 - - 0 0.039 µF
0.047 µF 22.20 1750 4.4 LDEMD2470 - A5 - - 0 40.30 1500 3.4 LDEPF2470 - A5 - - 0 50.40 1250 4.1 LDEQG2470 - A5 - - 0 0.047 µF
0.056 µF 28.24 2250 3.5 LDEME2560 - A5 - - 0 40.30 1250 3.9 LDEPF2560 - A5 - - 0 50.40 1000 4.7 LDEQG2560 - A5 - - 0 0.056 µF
0.068 µF 28.24 1750 4.1 LDEME2680 - A5 - - 0 40.30 1250 4.5 LDEPF2680 - A5 - - 0 50.40 1000 5.5 LDEQG2680 - A5 - - 0 0.068 µF
0.082 µF 28.24 1500 4.7 LDEME2820 - A5 - - 0 40.30 1000 5.4 LDEPF2820 - A5 - - 0 60.54 1000 4.2 LDEQH2820 - A5 - - 0 0.082 µF
0.10 µF28.24 1500 5.4 LDEME3100 - A5 - - 0 50.40 1250 3.9 LDEPG3100 - A5 - - 0 60.54 750 4.8 LDEQH3100 - A5 - - 0 0.10 µF
40.30 1000 5.5 *LDEPF3100 - A0 - - 0
0.12 µF 40.30 1500 3.6 LDEMF3120 - A5 - - 0 50.40 1250 4.4 LDEPG3120 - A5 - - 0 0.12 µF
0.15 µF 40.30 1250 4.4 LDEMF3150 - A5 - - 0 50.40 1000 5.3 LDEPG3150 - A5 - - 0 0.15 µF
0.18 µF 40.30 1000 5.1 LDEMF3180 - A5 - - 0 60.54 1000 4.2 LDEPH3180 - A5 - - 0 0.18 µF
0.22 µF 50.40 1250 3.8 LDEMG3220 - A5 - - 0 60.54 750 4.9 LDEPH3220 - A5 - - 0 0.22 µF
0.27 µF 50.40 1000 4.7 LDEMG3270 - A5 - - 0 60.54 750 5.7 *LDEPH3270 - A5 - - 0 0.27 µF
0.33 µF 50.40 1000 5.6 LDEMG3330 - A5 - - 0 0.33 µF
0.39 µF 60.54 1000 4.2 LDEMH3390 - A5 - - 0 0.39 µF
0.47 µF 60.54 750 4.8 LDEMH3470 - A5 - - 0 0.47 µF
Lead Free
Suitable forxDSL
ITUCompliance
Size code 22.20 28.24 40.30 50.40 60.54
L (mm) 6.0 ± 0.3 7.3 ± 0.4 10.5 ± 0.4 13.0 ± 0.4 15.5 ± 0.4
W (mm) 5.0 ± 0.4 6.1 ± 0.4 7.9 ± 0.5 10.4 ± 0.5 13.7 ± 0.5
Tolerance - Standard: K = ±10%; M = ±20%; (J = ±5% available upon request and review of project/application)Packaging - N = Taped; A to Z = Special;Internal use
9
SMD Film Capacitors
06/2007
LDE series - PEN dieletric RoHS 6 - technical data
Plates Aluminium layer deposited by evaporation under vacuum.Winding Non inductive - Stacked technology.Terminations Four layers: aluminium, brass, nickel, pure tin.Marking On packaging only.Climatic category 55 / 125 / 56
Electrical data
Operating temperature range -55 to +125 °C
Rated voltage (VR) 50 - 63 - 100 - 250 - 400 - 630 - 1000 VDC
Category voltage (VC)
VC = VR up to 105 °C. For temperatures between 105 and 125 °C a decreasing factor of 1.25% per degree °C has to be applied on the rated voltage (D.C. and A.C.)
Size range 12.06 to 60.54Capacitance range 1000 pF to 4.7 μFCapacitance values E12 series
Capacitance tolerances
Standard: K = ± 10 % M = ± 20 %; (J = ±5% available upon request and review of project/application)
Dissipation factor (tgδ) ≤ 0.8 % (T = 25 ± 5 °C; f = 1 kHz)Dielectric absorption 0.8%
Insulation resistance
≥ 1 GΩ for C ≤ 0.33 μF≥ 400 s for C > 0.33 μFTest conditions:T = 25 ± 5 °C; charging time: 1 min.Charging voltage:10 VDC for VR < 100 VDC
100 VDC for VR ≥ 100 VDC
Surge voltage test
1.4 x VR (2 s; T = 25 ± 5 °C) for VR ≤ 630 VDC
1.5 x VR (2 s; T = 25 ± 5 °C) for VR = 1000 VDC
Maximum dv / dt100 V / μs for VR ≤ 630 VDC
300 V / μs for VR = 1000 VDC
Tests and performances
Damp heat(40°C/93% R.H.; 56 days)
│∆C/C│≤ 7%;│∆tgδ│≤ 50 x 10-4;IR ≥ 50% of the limit value
Endurance(125 °C; 2000 h; 1.25 x VC)
│∆C/C│≤ 5%;│∆tgδ│≤ 50 x 10-4;IR ≥ 50% of the limit value
Rapid change of temperature(1h at -55 °C;1h at +125 °C; 1000 cycles)
│∆C/C│≤ 5%│∆tgδ│≤ 50 x 10-4
IR ≥ limit valueNo mechanical damage
Reflow (as per reflow recommendations, see page 14)
│∆C/C│≤ 3%│∆tgδ│≤ 50 x 10-4
IR ≥ limit valueNo mechanical damage
Bending(1 to 6 mm deflection)
│∆C/C│≤ 1%No visible damage on the terminations (pealing) neither on the body (cracking)
Long term stability (2 years)
│∆C/C│≤ 3% for sizes ≤ 22.20│∆C/C│≤ 2% for sizes > 22.20
Reliability(REF MIL HDBK 217)
Failure rate ≤ 1 Fit1 Fit = 10-9 failures / (components * hours)
When a capacitor is used in A.C. applications at high frequency, the consequent internal heating may cause the risk of smoke or fire. This is due to the high current flowing through the capacitor’s Equivalent Series Resistance.
The formula to calculate the maximum power [W] dissipated by the capacitor is the following:
(N: number of significant harmonics)
The formula to calculate the maximum power [W] that can be dissipated by the capacitor is the following:
It must be: Pcmax ≤ Pclim
Please refer to the table and graph below for ∆Tlim and Rth values
(Th: maximum ambient temperature surrounding the capacitor or hottest contact point - i.e. tracks - whichever is higher, in the worst operating conditions in °C)
Size 12.06 12.10 18.12 22.20 28.24Hmax[mm]
1.2 2.1 1.7 2.6 2.3 3.3 4.4 3.5 4.5 5.4
Rth[°C/W]
175 165 157 151 135 128 122 114 108 103
Size 40.30 50.40 60.54Hmax[mm]
3.6 4.5 5.5 3.6 4.5 5.7 3.6 4.5 5.7
Rth[°C/W]
93 88 84 75 70 66 58 55 52
Dissipation (A.C. applications)
i
N
i= i
irms
ii
N∑
∑
i== �
�
δ
δ
irms
( ftgCf
I
( ftgCfVPc
max1
2_
max1
2_max
**2
**2* )=
)=
10
SMD Film Capacitors
06/2007
LDE Series - PEN dielectric RoHS 6
MAXIMUM VRMS and IRMS vs. frequency (50 - 63 - 100 - 250 VDC rated voltage)(Sinusoidal wave form / Th* ≤ 85°C)
Note: measurements performed in free air condition*Th: maximum ambient temperature surrounding the capacitor or hottest contact point - i.e. tracks - whichever is higher, in the worst operating conditions in °C
11
SMD Film Capacitors
06/2007
LDE Series - PEN dielectric RoHS 6
MAXIMUM VRMS and IRMS vs. frequency (400 - 630 - 1000 VDC rated voltage)(Sinusoidal wave form / Th* ≤ 85°C)
Note: measurements performed in free air condition*Th: maximum ambient temperature surrounding the capacitor or hottest contact point - i.e. tracks - whichever is higher, in the worst operating conditions in °C
12
SMD Film Capacitors
06/2007
Rated capacitance
16 VDC 50 VDC Rated capacitanceSize code Pcs per
reelHmax [mm] Part number Size code Pcs per
reelHmax [mm] Part number
3300 pF 12.06 3000 1.1 LDBCA1330 - C5 - - 3300 pF
3900 pF 12.06 3000 1.1 LDBCA1390 - C5 - - 3900 pF
4700 pF 12.06 3000 1.1 LDBCA1470 - C5 - - 4700 pF
5600 pF 12.06 3000 1.1 LDBCA1560 - C5 - - 5600 pF
6800 pF 12.06 3000 1.1 LDBCA1680 - C5 - - 6800 pF
8200 pF 12.06 3000 1.1 LDBCA1820 - C5 - - 8200 pF
0.010 µF 12.06 3000 1.1 LDBCA2100 - C5 - - 0.010 µF
0.012 µF 12.06 3000 1.1 LDBAA2120 - C5 - - 12.06 3000 1.1 LDBCA2120 - C5 - - 0.012 µF
0.015 µF 12.06 3000 1.1 LDBAA2150 - C5 - - 12.10 2250 1.4 LDBCB2150 - C5 - - 0.015 µF
0.018 µF 12.06 3000 1.1 LDBAA2180 - C5 - - 12.10 2250 1.5 LDBCB2180 - C5 - - 0.018 µF
0.022 µF 12.06 3000 1.1 LDBAA2220 - C5 - - 12.10 2250 1.5 LDBCB2220 - C5 - - 0.022 µF
0.027 µF 12.06 3000 1.1 LDBAA2270 - C5 - - 12.10 2250 1.5 LDBCB2270 - C5 - - 0.027 µF
0.033 µF 12.06 3000 1.1 LDBAA2330 - C5 - - 12.10 2250 1.7 LDBCB2330 - C5 - - 0.033 µF
0.039 µF 12.06 3000 1.2 LDBAA2390 - C5 - - 12.10 2250 1.9 LDBCB2390 - C5 - - 0.039 µF
0.047 µF 12.06 3000 1.3 LDBAA2470 - C5 - - 12.10 2250 2.3 LDBCB2470 - C5 - - 0.047 µF
0.056 µF 12.10 2250 1.7 LDBAB2560 - C5 - - 18.12 4000 1.7 LDBCC2560 - C5 - - 0.056 µF
0.068 µF 12.10 2250 1.7 LDBAB2680 - C5 - - 18.12 4000 1.7 LDBCC2680 - C5 - - 0.068 µF
0.082 µF 12.10 2250 1.7 LDBAB2820 - C5 - - 18.12 4000 1.7 LDBCC2820 - C5 - - 0.082 µF
0.10 µF 12.10 2250 2.0 LDBAB3100 - C5 - - 18.12 3000 2.0 LDBCC3100 - C5 - - 0.10 µF
LDB Series - PPS dielectric RoHS 6
Size code 12.06 12.10 18.12
L (mm) 3.3 +0.3- 0.1 3.3 +0.3
- 0.1 4.7 +0.3- 0.2
W (mm) 1.7 ± 0.2 2.5 ± 0.3 3.3 ± 0.3
Tolerance - G = ±2%; J = ±5%; Packaging - N = Taped; A to Z = Special;Internal use
±2% Tolerance available
Lead Free
Standard version
13
SMD Film Capacitors
06/2007
LDB Series - PPS dielectric RoHS 6 - technical data
Plates Aluminium layer deposited by evaporation under vacuum.
Winding Non inductive - Stacked technology.
Terminations Four layers: aluminium, brass, nickel, pure tin.
Marking On packaging only.
Climatic category 55 / 125 / 56
Electrical dataOperating temperature range -55 to + 125 °C
Rated voltage (VR) 16 - 50 VDC
Category voltage (VC)VC = VR up to 105 °C.For temperatures between 105 and 125 °C a decreasing factor of 1.25 % per degree °C has to be applied on the D.C. rated voltage
Size range 12.06 to 18.12
Capacitance range 3300 pF to 0.1 μF
Capacitance values E12 series
Capacitance tolerances ± 2 % (G); ± 5 % (J)
Dissipation factor (tgδ) ≤ 0.6 % (T = 25 ± 5 °C; f = 1 kHz)
Dielectric absorption 0.02%
Insulation resistance
≥ 3 GΩTest conditions:T = 25 ± 5 °C; charging time: 1 min.Charging voltage:10 VDC for VR = 16 VDC
50 VDC for VR = 50 VDC
Surge voltage test 1.75 x VR (5 s; T = 25 ± 5 °C)
Tests and performancesDamp heat(40 °C / 93% R.H.; 56 days) │∆C/C│≤ 5%;│∆tgδ│≤ 30 x 10-4;IR ≥ 50% of the limit value
Endurance (125 °C; 2000 h; 1.25 x VC) │∆C/C│≤ 3%;│∆tgδ│≤ 30 x 10-4;IR ≥ 50% of the limit value
Rapid change of temperature(1h at -55 °C;1h at +125 °C; 1000 cycles)
│∆C/C│≤ 3%│∆tgδ│≤ 50 x 10-4 IR ≥ limit value No mechanical damage
Reflow (as per reflow recommendations, see page 14)
│∆C/C│≤ 3% ;│∆tgδ│≤ 50 x 10-4 ; IR ≥ limit value No mechanical damage
Bending(1 to 6 mm deflection)
│∆C/C│≤ 1%No visible damage on the terminations (pealing) neither on the body (cracking)
Long term stability(2 years) │∆C/C│≤ 1%
Reliability(REF. MIL HDBK 217)
Failure rate ≤ 1 Fit 1 Fit = 10-9 failures / (components * hours)
14
SMD Film Capacitors
06/2007
PreheatingMaximum preheating time: 180 sMinimum temperature: 150 °CMaximum temperature: 200 °C
Maximum temperature on the component’s body (Tmax):
Maximum time within Tmax and Tmax - 5 °C (∆T5): 40 s (Tmax ≤ 250 °C) 10 s (250 °C < Tmax ≤ 255 °C *)
Maximum time over 217 °C (∆T217): 150 s
Maximum temperature ramp rate: 3 °C / s (heating) 6 °C / s (cooling)
Second reflow if two reflow processes are needed, be sure that, before
the second reflow, the temperature on the capacitor’s surface is lower than 50 °C.
* For LDB series this value is 260 °C.
Landing areas and solder paste suggestions
Size A [mm] B [mm] C [mm] D [mm]12.06 1.5 1.1 2.3 4.512.10 2.3 1.1 2.3 4.518.12 3.0 1.7 3.1 6.522.20 4.6 2.1 3.9 8.128.24 5.7 2.3 5.3 9.940.30 7.4 2.6 8.2 13.450.40 9.6 2.6 10.7 15.960.54 12.6 2.6 13.2 18.4
These new landing area dimensions have the aim of taking full advantage of the new RoHS 6 terminations design.
The preceding layout (2004 Catalogue) is therefore to be considered still valid, although not optimal for RoHS 6.
Soldering recommendations and cautions
Capacitor Hmax [mm]
Capacitor volume [mm3]< 350 350 - 2000 > 2000
< 1.6 255 °C * 255 °C * 255 °C *
1.6 - 2.5 255 °C * 250 °C 245 °C
> 2.5 250 °C 245 °C 245 °C
in line with JEDEC STD 020C ed. July 2004 with some limitations
Reflow recommendations
Reflow temperature profile
We suggest to use a Sn / Ag / Cu solder paste (suggested thickness: 0.10 ÷ 0.15 mm).
If a NOT Lead Free solder paste is used, a minimum peak temperature of 210 °C on the component’s body is suggested.
Linear profiles are also allowed (if in line with the reflow recommendations)
15
SMD Film Capacitors
06/2007
Soldering recommendations and cautions
Flux / Cleaning / Storage and Moisture
Flux suggestions We suggest to use a no-clean flux with a halogen
content lower than 0.1%.
Storage and moisture recommendations Arcotronics SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 months
minimum shelf life (temperature ≤ 40 °C / relative humidity ≤ 90%). After the MBB has been opened, components may stay in areas with controlled temperature and humidity (temperature
≤ 30 °C / relative humidity ≤ 60%) for 168 hours (rated voltage ≤ 100 VDC) or 696 hours (rated voltage > 100 VDC). For longer periods of time and / or higher temperature and / or higher relative humidity values, it is absolutely necessary
to protect the components against humidity. If the reel inside the MBB is partially used, Arcotronics recommends to re-use the same MBB or to avoid areas without controlled temperature and humidity (see above). If the above conditions are not respected, components require a baking (minimum time: 48 hours at 55 ± 5 °C) before the reflow.
Manual assembly recommendations If PCBs are assembled manually, care must be taken to
avoid any mechanical damage to the components. Our recommendations are the following (see Fig. 1): 1) when using tweezers, the components should be
gripped across the two terminations (A); 2) avoid any contact with the two cutting surfaces (C); 3) a vacuum pen is recommended on the top and
bottom surfaces (B).
Manual soldering recommendations LDE and LDB series have been designed for Surface Mount Technology, pick & place machines and reflow soldering
systems. Using a manual soldering iron, issues may occur because the typical temperature for manual soldering is around 350 °C. Therefore please pay careful attention:
- never touch the capacitor body with the sodering iron but rather touch the soldering iron and the end termination with the tin wire edge (see Fig. 2);
- if the soldering iron is equipped with a temperature controller device: set the temperature to 250 ± 3 °C and proceed as per Fig. 2 (the maximum soldering time, on both terminations, is 5 s);
- if the soldering iron is NOT equipped with a temperature controller device: this is the worst situation. The following are a few practical suggestions but, clearly, the operator’s experience is
extremely important: 1) proceed as per Fig. 2; 2) as soon as the tin wire starts melting, move the soldering iron away as quickly as possible; 3) wait a few seconds and check that the soldering joint has been properly created;
- if the soldering iron is equipped with a hot air flow device: set the hot air temperature to 250 ± 3 °C and do not send the hot air directly onto the capacitor plastic body. In this situation, the operator’s experience is very important;
- in any case, avoid mass-mounting SMD Film Capacitors manually.
Fig. 1
Fig. 2
Cleaning suggestions To clean the PCB assembly we suggest to use a suitable solvent like Isopropyl Alcohol, deionized water or neutral
pH detergents. Solvents like Toluene, Xylene and Trichloroethylene should not be used.
16
SMD Film Capacitors
06/2007
In case of: Typical cause Typical solution
no solder joint on one end termination
landing area dimensions see landing areas suggestions, page 14
solder paste quality see solder paste suggestions, page 14
not-uniform solder paste thickness on the landing areas set the dispensing solder paste machine properly
wrong position of the capacitor on the landing areas set the pick & place machine properly
thermal profile parameters see reflow recommendations, page 14
bad temperature distribution in the reflow oven
check the reflow oven temperature distribution and variations
no solder joint on both end terminations
landing area dimensions see landing areas suggestions, page 14
solder paste quality see solder paste suggestions, page 14
no solder paste on the landing areas set the dispensing solder paste machine properly
thermal profile parameters see reflow recommendations, page 14
bad temperature distribution in the reflow oven
check the reflow oven temperature distribution and variations
oxidated end terminations see moisture recommendations, page 15
capacitor’s body mechanical deformation
too long time over 217 °C see reflow recommendations, page 14
too long time within Tmax and Tmax - 5 °C see reflow recommendations, page 14
too high temperature ramp rate see reflow recommendations, page 14
capacitor damaged by a soldering iron see manual soldering recommendations, page 15
capacitance drop (up to 20%)
too long time over 217 ° C see reflow recommendations, page 14
too long time within Tmax and Tmax - 5 °C see reflow recommendations, page 14
too high temperature ramp-up rate see reflow recommendations, page 14
capacitor damaged by a soldering iron see manual soldering recommendations, page 15
capacitance drop (over 20%) capacitor damaged by a soldering iron see manual soldering recommendations, page 15
Production process basic suggestions
Note: small fissures on the capacitor’s cutting surface are actually slight detachments of two adjacent metallized film layers and have to be considered only as an aesthetic issue related to the SMD Film Capacitors’ manufacturing process and technology.
Therefore, small fissures on SMD Film Capacitors are not comparable to cracks on SMD Ceramics.
Fissures do not influence in anyway SMD Film Capacitors’ reliability.