CISCO-877>show interfaces atm0 ATM0 is up, line protocol is up Hardware is MPC ATMSAR (with Alcatel ADSL Module) MTU 4470 bytes, sub MTU 4470, BW 253 Kbit/sec, DLY 1450 usec, reliability 255/255, txload 61/255, rxload 126/255 Encapsulation ATM, loopback not set Encapsulation(s): AAL5 AAL2, PVC mode 10 maximum active VCs, 1024 VCs per VP, 1 current VCCs VC Auto Creation Disabled. VC idle disconnect time: 300 seconds Last input 04:04:29, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2 Queueing strategy: Per VC Queueing 5 minute input rate 636000 bits/sec, 70 packets/sec 5 minute output rate 62000 bits/sec, 57 packets/sec 594750 packets input, 763841946 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 18 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 408085 packets output, 56309185 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 4 unknown protocol drops 4 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out