shri gajanan maharaj shikshan prasarak mandal’s, … _seminar_report.pdf · a prime motto of...
TRANSCRIPT
Shri Gajanan Maharaj Shikshan Prasarak Mandal’s,
SHARADCHANDRA PAWAR COLLEGE OF ENGINEERING
Dumbarwadi [Otur], Tal- Junnar, Dist- Pune 410504
REPORT ON DIFFERENT TYPES OF ACTIVITIES PERFORMED BY
COLLEGE FOR STUDENTS
ACADEMIC YEAR 2015-16
1. Four Day Workshop on PLC & SCADA during 23/03/2016 TO
26/3/2016
The Department of Electronics & Telecommunication Engineering, Sharadchandra Pawar
College of Engineering, Savitribai Phule Pune University, Pune. Organized “four day Workshop
on PLC & SCADA during 23/03/2016 TO 26/3/2016.
The main objective of this WORKSHOP was to make the aspiring engineers acquainted
with the conceptual as well as practical knowledge of the Industrial Automation & latest
technologies being used to achieve industrial automation.
The idea of organizing this workshop was to teach the basic fundamentals of automation
in the students and provide them with a platform to work on, In The Near Future. The Most Used
Guiding Force Behind an Automated Industrial Plant Is A “Programmable Logic Controller”
Generally Known As A PLC. PLCs Along With Certain Other Necessary Ingredients Like
Sensors, Motors, Actuators, Valves, Conveyors, Boilers, SCADA Systems, Computers & Many
More, Makes A Real Automated Manufacturing Plant.
All the faculty and staff members actively participated in the event to make it a grand
success.
Detail Report Of Workshop:
Title: (PLC system & SCADA software)
Resource person: 1.Prof. Narendra Lagate 2. Prof. Sane Adwitiya; Sr. Project Engg, Prolific
Systems & Tech. Pvt. ltd. Pune.
Coordinator: Prof. Chinchole M.G (HOD E&TC Dept.)
About workshop: The Four Day intensive workshop on Industrial automation product (PLC
System & SCADA software) has been conducted by Prolific Systems & Tech. Pvt. ltd. Pune to
involve students in a cohesive drive with the academia and industry towards excellence in
automation product technology. This workshop was an attempt to cover material relevant to
giving students necessary knowledge and skill set to appreciate the rapid changing scenario in
automation systems and take advantage of this in their future career. Practical/laboratory sessions
are held, which will supplement the knowledge disseminated during the lecture sessions with
adequate hands on experience. Workshops support in instructor-lead, lab-intensive courses
focused on the practical application of technologies through the facilitation of a project-related
lab.
Duration: It’s a four day workshop. From 23/03/2016 TO 26/3/2016. In this five-day course,
student gained valuable hands-on experience.
How many students have attended this workshop: 77?
Software Tools: Wonder ware’s in Touch
Skills Gained
After completing this workshop, students are able to:
Create and design new automation model by using PLC programming logic.
Interface external peripheral by using SCADA software.
Topics covered in this Workshop:
Session I: Presentation on Recent Trends in Industrial Automation & PLC-SCADA
Introduction To Automation
Why We Need Automation
Where Automation?
Evolution In Industrial Automation (A Brief History)
Different Type Of Industrial Control Mechanisms)
Introduction To PLCs
PLC Advantages Over Microcontrollers
Area Of Applications
DATA Flow During Automation
Motor Drives Introduction & Their Need
Sensors Introduction & Their Need
HMI Introduction & Its Need
SCADA Introduction& Its Need
Session II: Detail study of PLC & SCADA
PLC
SCADA
Session III: PLC I/Os Basics, Burning & Interfacing Concepts
Allen Bradley & Rockwell Automation’s Details
Brief Description To Input/ Output Pins Of Micrologix-1000
Ladder Diagram Basics
Introduction To RSLogix
Downloading A Ladder Program In PLC Using RSLinx.
How To Take Input From Panel
How To Give Output To Panel
Running First PLC Application.
Session IV: Hands on PLC Training Kit
Participants will perform hands on PLC training Kit.
Photographs:
2. Conduction of Seminar on Computer Networking
(Cisco Certification) dated on 12/02/2016.
Seminar on “Computer Networking” was successfully organized by Department of
Electronics And Telecommunication Engineering, Sharadchandra Pawar College of Engineering,
Otur, Pune, on 12/02/2016 and conducted by GATS ACADEMY PUNE. The Seminar was
organized for Undergraduate students and the contents covered were beneficial as per the
syllabus prescribed by SPPU . Brief report of the day is given below with the feedback at the
end:
Seminar Details:
Session on basics of Infrastructure establishment in Wireless Sensor Network:
In the first session, resource person Dr. Nilima Narad started her discussion with
concepts of Wireless sensor network basics and their applications. She also explained the use of
sensors in our day today life. She covered the concepts related to infrastructure establishment
parameters. The first session focused more on understanding the infrastructure required to
establish wireless sensor network.
Session on establishment in Wireless Sensor Network:
In the second session, resource person briefed about the localization of sensor nodes,
sensor task control. Later she covered many important concepts regarding operating systems
used for wireless sensor network.
Seminar Objectives:
The objectives of the sessions were to enlighten the students with the different subjects
pertaining to Computer Science & Engineering, to equip them with hands on session on CPU
Assembling & WINDOWS 8 operating system installation and to acquaint them with latest
Technology advancements.
Photocopy:
3. A Seminar on “How to Crack IES, GATE, and PSUs in first Attempt”
Dated on 12/02/2016.
Seminar on “How to Crack IES, GATE, and PSUs in first Attempt “was successfully
organized by Department of Electronics And Telecommunication Engineering, Sharadchandra
Pawar College of Engineering, Otur, Pune, on 16/02/2016 and conducted by ACE academy
Pune. The Seminar was organized for Undergraduate students and the contents covered were
highly beneficial. A Brief report of the day is given below with the feedback at the end:
Seminar Details:
The Seminar began with a brief introduction of the resource faculty Mr. Tushar P. Patil.
The session began with a brief overview of the importance of competitive exams and how
conceptual knowledge of students is important for attaining success at these exams.
A prime motto of imparting quality education in engineering and molding the engineering
students to crack competitive examinations. Who aspire to get into IISc/IITs after B.Tech and for
those who cherish the dream of joining prestigious jobs through IES/PSUs.
Photocopy:
4. Conduction of Guest Lecture on “Personality Development and
Confidence Building” Dated on 25/01/2016.
Guest lecture on “Personality Development and Confidence Building” “was successfully
organized by Sharadchandra Pawar College of Engineering, Otur, Pune, on 25/01/2016.
The Guest lecture was organized for Undergraduate students and the contents covered
were highly beneficial. A Brief report of the day is given .
Details:
A Guest lecture on Personality Development and Confidence Building was organized on
25/01/2016. Mr. Tushar P. Patil. Was the resource person working for Smart Personality
Development Academy Pune. He enlightened and guided the students in various career
aspects where the students can aspire and initiate their career.
He shared his experience in the area of Journalism and inspired the students to pursue
career in the field of Journalism. The presentation and interaction of the speaker was very
effective, wherein he showed many related visuals. The students interacted
enthusiastically and the resource person answered their queries and cleared their doubts.
Conducted three modules for Interview skills for the students in which he initially
introduced the students to the real life time situations that they will face and how they
need to prepare themselves for the same. He stressed on the need to understand and learn
the art of writing email conversations, how to present oneself over the phone during the
interview sessions and also provided a detailed insight into resume writing techniques.
He also emphasized the significance of personal grooming, body language and postures,
etiquettes and mannerism to be adopted before appearing for an interview. The session
ended with an interactive question answer session.
Photocopy:
5. Conduction of Guest Lecture on “Embedded System And RTOS” Dated
on 06/10/2015.
Guest lecture on “Embedded System and RTOS” was successfully organized by Department of
Electronics And Telecommunication Engineering, Sharadchandra Pawar College of Engineering,
Otur, Pune, on 06/10/2015. The Guest lecture was organized for final year students and the
contents covered were highly beneficial. A Brief report of the day is given below with the
feedback at the end:
Details:
A Guest Lecture on Embedded system and RTOS (Real Operating System Design by the expert,
Prof. Mangesh D. Thakur from Sapkal College of Engineering, Nashik, who provided
information about the basics of Operating System and Embedded Operating System; according
to the syllabus he covered each and every important point which will help the students to gain
theoretical as well as practical knowledge. He also guided students on RTOSD (Real Time
Operating System Design) which is one of the theory subjects for the students and suggested to
do a detailed study of each unit so that proper knowledge is gained and thus students will find it
easy to write the theory paper. Finally the session ended with a vote of thanks by the HOD.
Photographs:
6. Conduction of Guest Lecture on “Electronic Devices And Circuits”
Dated on 06/10/2015.
Guest lecture on “Electronic Devices & Circuits” “was successfully organized by Department of
Electronics And Telecommunication Engineering, Sharadchandra Pawar College of Engineering,
Otur, Pune, on 06/10/2015. The Guest lecture was organized for Second Year students and the
contents covered were highly beneficial. A Brief report of the day is given below with the
feedback at the end:
Details:
A Guest Lecture on Electronic Devices And Circuits by the expert, Prof. Vivek Srivastav from
Dr. D. Y Patil College of Engineering, Lohgaon, who provided A strong intuition and insight of
the dynamic of electronic components like diodes, BJTS and MOSFETS which can be used to
design and optimize circuits performance. He also explains the Detailed of DC and AC analysis
of BJT and MOSFETs especially for small signal analysis. According to the syllabus he covered
each and every important point which will help the students to gain theoretical as well as
practical knowledge.
7. Conduction of Guest Lecture on “Career Guidelines in Electronics &
Telecommunication Engineering” Dated on 06/10/2015.
Guest lecture on “Career Guidelines in Electronics and Telecommunication Engineering” was
successfully organized by Department of Electronics And Telecommunication Engineering,
Sharadchandra Pawar College of Engineering, Otur, Pune, on 22/09/2015. The Guest lecture was
organized for Second, Third & Final Year students and the contents covered were highly
beneficial. A Brief report of the day is given below with the feedback at the end:
Details:
A Guest Lecture on Career Guidelines in Electronics and Telecommunication Engineering by the
expert, Prof. Sudhir U. Gaikwad, from Ahemadnar who provided a strong intuition and insight of
the dynamic of current employability status of engineering students. He highlighted the growth
of VLSI and Embedded Industry, which has increased demand for fresh enginers. His talk also
focused on the recent industry trends in core engineering field. The talk also provided the student
a platform for sharing their thought and was endowed with proper guidance regarding all the
aspects of career in core VLSI and Embedded Field.
8. Industrial Visit To “Door-darshan Center, Sinhgad, Pune” on
06/01/2016.
Industrial visit To “Doordarshan Center, Sinhgad, Pune”was successfully conducted by
Department of Electronics And Telecommunication Engineering, Sharadchandra Pawar College
of Engineering, Otur, Pune, on 06/01/2015. The Industrial visit was organized for Final Year
students and the points highlighted during visit were highly beneficial. A Brief report of the day
is given below with the feedback at the end:
Industrial Visit Details:
Visit was organized with the prior permission and guidance of Honorable Principal Dr. G. U.
Kharat. It was supported by Respected HOD Mr. M. G. Chinchole, Departmental Visit
Coordinator Mr. R. S. Parbat and along with Department T&P coordinator Mr. R. S. Bansode.
Total 41 students and 3 staff visited the Transmitter Section of Doordarshan Center,
Sinhgad, Pune.
The details of Journey are as follows:-
1. We started travelling from Otur Bus stand at Morning 6.45 a.m. on 06th
January 2016.
2. We reached to Sinhgad, Pune at morning 10.45 a.m. 06th
January 2016
3. Then they started their sessions on the Morning 11.00 a.m. of the same day.
4. Visit was completed at 03.00 p.m. we completed the visit of Doordarshan and we were back to
the Otur at 08.00 p.m.
The one day visit was organized with prior permission of The Deputy Director, Engineering
Department, Doordarshan Center, Sinhgad, Pune, on 16th
December 2015. The students got
benefited in terms of the technical details provided by the organization on satellite
communication and audio & video transmission techniques.
Visit was conducted for about 1 hour and 30 min. sessions which covered the following details:-
1. Broadcast Station
2. Earth Station
3. Studio
Mr. S. U. Dharmadhikari (Asstt.Engg.) explained about the different frequency band i.e. HF,
VHF, UHF etc, Transmitter & Receiver, uplink & downlink frequency, Line of sight, analog &
digital signal, resonance, microwave communication, satellite communication, waveguide,
multiplexing, RF, digital encoding, quantization, noise, earth station, power supply, signal
transmission, and many more such devices and principles.
Photographs:
9. Two Month Saturday-Sunday (70hrs) Workshop on CAD Creo 3.0
Professional Training
The Department of Mechanical Engineering, Sharadchandra Pawar College of Engineering,
Savitribai Phule Pune University, Pune organized “Two month Saturday-Sunday (70hrs)
Workshop on CAD Professional Training” during February 2016 to March 2016.
Workshop Report
Title:- Workshop on Creo 3.0.
Resource Person:- 1. Mr. Yamana Umakant. 2. Mr. Gaurav Sharma(Dysmech Consultancy
Services Pvt, Pune.)
Coordinator:- Dumbre A.A (Assistant Professor)
About the Workshop:-The 70 hrs 2 month intesive workshop on Creo 3.0 has been conducted
by Dsymech Consultancy Services Pvt. Pune to involve students in a cohesive drive with the
academia and industry towards excellence in software knowledge. This Workshop was an
attempt to cover rapid changing scenario in software knowledge and Practice. Practical sessions
are held which will supplement the knowledge during lecture.
Duration:- 70hrs Workshop
Period:- 01/02/2016 to 30/03/2016.
How many students have attended this Workshop:- 50.
Software Tools:- Creo 3.0.
Skills Gained:- After completing Workshop students are able to
Draw complicated shapes.
Animate the assembly.
Draft the objects.
Topics Covered in Workshop:-
Introduction to Creo 3.0 CAD.
Development Phase.
Different Modeling and Design software.
Creo 3.0 Advantages over other modeling software’s.
Basic tools.
Sketching(2D)
Part Modeling(3D)
Design and Modeling of part by using different commands.
Part Modeling
Assembly
Draft
ACADEMIC YEAR 2016-17
1. Report of Workshop on Internet of Things.
The Department of Electronics & Telecommunication Engineering, Sharadchandra Pawar
College of Engineering, Savitribai Phule Pune University, Pune. Organized “Two day Workshop
on “INTERNET OF THINGS” during 07/10/2016 to 08/10/2016.
"If you think that the internet has changed your life, think again. The IoT is about to change
it all over again!” - Brendan O’Brien
Internet of Things is a new revolution of the Internet. A world where the real, digital and the
virtual are converging to create smart environments that make energy, transport, cities and many
other areas more intelligent. A device become a smart device is called IOT. Now a days there are
many android and server based application. In this system, value of sensor (e.g. temperature
sensor, motion sensor, accelerometer sensor etc.) will be shown on GUI or web server or android
application through wireless communication and device will be controlled automatically. Device
will be operated on GSM/GPRS.
All the faculty and staff members actively participated in the event to make it a grand
success.
Detail Report Of Workshop:
Title: Internet of Things
Resource person: 1.Dr.M.U.Kharat 2.Dr. P.R.Deshmukh, 3.Dr. S.B.Wankhade
4. Prof.R.D.Deokar 5.Mr.R.N.Gupta.
Coordinator: Prof. Chinchole M.G (HOD E&TC Dept.)
About workshop:
(What is Internet of Things?)
It’s a global network infrastructure, linking physical and virtual objects using cloud computing,
data capture, and network communications. It allows devices to communicate with each other,
access information on the Internet, store and retrieve data, and interact with users, creating smart,
pervasive and always-connected environments.
The Internet of Things (IoT), sometimes referred to as the Internet of Objects, will change
everything— including ourselves. This may seem like a bold statement, but consider the impact
the Internet already has had on education, communication, business, science, government, and
humanity. Clearly, the Internet is one of the most important and powerful creations in all of
human history. Now consider that Internet of Things represents the next evolution of the Internet,
taking a huge leap in its ability to gather, analyse, and distribute data that we can turn into
information, knowledge, and, ultimately, wisdom. In this context, Internet of Things becomes
immensely important.
Duration: It’s a Two day workshop. From 07/10/2016 to 08/10/2016. In this Two-day course,
student gained valuable hands-on experience.
How many students have attended this workshop: 70.
Software Tools: Rasbian Operating System.
Topics covered in this Workshop:
Day 1
1. Introduction to the Internet of Things
The Internet of Things
The Basics of Sensors & Actuators
Introduction to Cloud Computing
2. The Arduino Platform
The Arduino Open-Microcontroller Platform
Arduino Basics
Arduino Board Layout & Architecture
3. Reading from Sensors
4. Programming fundamentals ( C language )
5. Arduino Programming & Interface of Sensors
Interfacing sensors with Arduino
Programming Arduino
Reading from Sensors
Project 1: Simple LED Program for Arduino
Project 2: Integrating Sensors & Reading Environmental Physical Values.
Project 3: Reading Environmental Values on Android Smartphone.
Talking to your Android Phone with Arduino
Connecting Arduino with Mobile Device.
The Android Mobile OS.
Using the Bluetooth Module
Project 4: Voice Controlled Mini Home Automation using Android Smartphone
Project 5: Control Devices using Localhost Web Server for Home Automation.
Integrating Ethernet Module & Testing DHCP Connection
Creating Program for Localhost Web Server for controlling devices.
Day 2
Project 6: Creating own Android App using MIT App Inventor & controlling Arduino connected
devices.
Project 7: Being Social on Twitter & update status on Twitter through Arduino
Make Electronics Gadget Talk to Internet
Integrating Ethernet Module
Creating App on Twitter
Project 8: Send Voltage & Analog Data on Cloud Server.
Cloud Computing
Communicating with the Cloud using Web Services.
Cloud Computing & IoT.
Popular Cloud Computing Services for Sensor Management.
Project 9: Use Arduino to Upload free data from Environmental Sensors to Cloud Server.
Project 10: Automatically Tweet Sensor Data on Twitter.
Project 11: Receive Automatic Call Notification on Mobile Phone for Burglar Alarm using IoT
Platform.
Project 12: Control Electronic Devices from anywhere across the world using Internet & Mobile
App.
Skills Gained
Current scenario/job opportunities of embedded industries.
Understanding the skill set required in a new employee in embedded industry.
Understanding the robotics future and scope Understanding the different microcontroller
available in the industry & their use.
In-depth knowledge on design, construction and programming concepts involved in
building an autonomous robot Learn & Interact with renowned Industry Experts.
Outcomes of attending the workshop:
What “the Internet of Things” means and how it relates to Cloud computing concepts
How open platforms allow you to store your sensor data in the Cloud
The basic usage of the Arduino environment for creating your own embedded projects at
low cost
How to connect your Arduino with your Android phone.
How to send data to the Internet and talk to the Cloud.
How to update sensor readings on Twitter (Social Networking Sites).
Control a Relay Switch by texting from your Phone.
Conclusion: In this Workshop, how machine to machine connectivity is rapidly growing
everywhere was discussed. Also the business benefits for connected devices and assets for
remote location connectivity are instantly cleared.
Photographs:
2. Guest Lecture on Engineering Graphics-I for First Year Students
Resource Person: Mr.D.J.Sonawane, Sahyadri college of Engineering, Rajuri
Subject Details: Engineering Graphics-I (F.E .)
Duration: 12 Dec.2016 to 14 Dec.2016 (18 Hr.)
Objectives of Guest Lecture:
To study orthographic projection
To study isometric projection
Topic Covers in Guest Lecture:
1. Basics of Orthographic Projection (Theory)
2. Orthographic Projections by First Angle Method (Problems)
3. Sectional Orthographic Projection (Problems)
4. Basics of Isomeric Projection (Theory)
5. Isomeric Projections (Problems)
1. Guest Lecture on Theory of Computation on dated 06/08/2016
The Guest Lecture on Theory of Computation was conducted by Department of Computer
Engineering, Sharadchandra Pawar College of Engineering, Otur on 06/08/2016. The Guest
lecture was organized for UG students. Mr. Swarup Kshastriya from Tech Mahindra Pune
delivered guest lecture on Theory of Computation.
Guest Lecture Details
In the first session, resource person give brief introduction of TOC, and started the basic
concepts of formal Language Theory. In this session he explains regular expression, DFA, NFA
and Grammars.
In the second session was based on Turing Machine and push down automata.
Seminar Objective:
The main objective of lecture is to give fine tricks to the students to solve problems and
applications of TOC in industry
Photographs:
Along with these technical events we also organized various cultural events like gathering,
Sports, Ganapati Utsav, Dahihandi, Trip, Alumni & Farewell function and Freshers welcome….