training siasa... · our training philosophy ... a320 a330 a350 15 days 15 days 11 days* ... a350 /...

24
SIASA project This project is funded by the European Union and implemented by EASA. TE.GEN.00409-001 Training Yannick DUMOLLARD Flight Operations & Training Technology Evolution – Impact on Airworthiness 23-24 September 2014, Windhoek, Namibia

Upload: hatu

Post on 04-Jun-2018

256 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

SIASA project

This project is funded by the European Union and implemented by EASA.

TE.GEN.00409-001

Training

Yannick DUMOLLARD Flight Operations & Training Technology Evolution – Impact on Airworthiness 23-24 September 2014, Windhoek, Namibia

Page 2: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Introduction

Training philosophy and availability

Training portfolio

Conclusion

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 2

Agenda

Page 3: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 3

UNIQUE to AIRBUS

30 years of experience

Pioneering use of Fly-By-Wire technology and side stick

Standardized flight deck layouts and common systems

A consistent pilot-aircraft interface across aircraft types

Page 4: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Our people

4

33 Pilots

70 Flight instructors

100 Maintenance instructors

Toulouse 503

Miami 69

Hamburg 37

Beijing 9

Bangalore 3

More than 600 people worldwide

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 5: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Our activities in 2012/2013

5

> 300 COURSES

in Airbus training catalogue*

Over the last 2 years, we have trained…

> 2700 pilots

> 6300 engineers

> 1500 flight ops engineers

*with approvals from EASA, CAAC, TCCA, CASA, GCAA, FAA

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 6: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Introduction

Training philosophy and availability

Training portfolio

Conclusion

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 6

Agenda

Page 7: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 7

Our training philosophy

Highly qualified instructors

Innovation in training concepts and technology

“Learning by doing” pedagogy

Competency-based training

Human factors

FOCUS ON SAFETY AND EXPERTISE

Page 8: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

8

Commonality

* Projected and subject to approval from the Aviation Authorities

Cross Crew Qualifications path

11 days*

A340 A380

A320

A330

A350

15 days

15 days

11 days*

Common Type Rating path

Significant savings: Reduced costs of training

Reduced time off duty

MOBILITY and FLEXIBILITY within the AIRBUS Aircraft Families

Cross Crew

Qualifications

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 9: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

9

Commonality

Cross Maintenance

Qualifications

CMQ Intra Family

A330

A380

A340

A320

A350 7 days*

CMQ Inter Family

* Projected and subject to approval from the Aviation Authorities

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 10: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Our training network

•Page 10

Worldwide training availability: when, where and how you want it

Extended regional development has started…

Singapore

Miami Toulouse

Mexico City

New Delhi

Beijing

Hamburg

Bangalore

New

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 10

Page 11: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Introduction

Training philosophy and availability

Training portfolio

Conclusion

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 11

Agenda

Page 12: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Our Training Portfolio

12

Flight Flight Operations Structure Maintenance Cabin

TRAINING SERVICES PORTFOLIO Providing services throughout the aircraft operational life

Key benefits One stop shop offer for all training needs

OEM expertise and fleet wide experience

Cost effective and local solutions

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 13: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

13

Long Entry Level Training

Airbus Pilot Transition Training

Recurrent Training

Airbus Pilot Instructor Course

Ab initio pilots

Short Entry Level Training

Propeller aircraft pilots

Jet aircraft pilots

Airbus aircraft pilots

Airbus aircraft

instructor

Airbus aircraft pilots

Cross Crew Qualification

Flight training

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

Initial Operating Experience (IOE)

Upgrade to command

Technical Flight Familiarisation

Fleet technical pilot

Three engine ferry flight

Refresher and recency trainings

And more:

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 14: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

14

Standard Transition training

Aircraft knowledge modules

Full Flight Simulator (FFS)

Ground Phase

SYSTEMS

KNOWLEDGE

Handling Phase

MANOEUVRES PROCEDURES

Airbus Pilot Transition (APT) trainer

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia

Page 15: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Flight Operations training

15

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

Weight & Balance engineer

Load control transition (passenger or freighter)

Dispatcher

Performance Instructor

Basic or Advanced Performance Engineer

Operator SMS

FDA Safety Analyst

Administration of Flight Operations manuals for engineers

FlySmart with Airbus Administrator

Administration of Flight Operations manuals for engineers

A350 / A380 ECAM Customization

Weight and Balance

Performance

Safety

EFB Management

Documentation and Procedures

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 16: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

16

Cabin training

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

Type Specific Cabin training

Airbus Cabin Crew Instructor Course (ACIC)

Cabin Crew Enhanced FAP (Flight Attendant Panel)

Corporate Jet Cabin training

Crew Resource Management

Initial Operating Experience (IOE)

INTERACTIVE HANDS-ON LEARNING EXPERIENCE

Cabin Emergency Evacuation Trainer (CEET)

Flight Attendant Panel (FAP) trainer

Virtual handset trainer

Virtual cabin

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 17: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

17

Maintenance training

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

Approved by the Airworthiness Authorities

Learning by doing by interactively operating inside simulated aircraft and cockpit

Reduced practice on aircraft to the strict minimum

ACT CONCEPT Airbus Competence Training

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 18: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

18

Maintenance training

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

General Familiarization

Certifying courses

Recurrent training

Specialized courses

Initial Operating Experience (IOE)

Instructor course (AMIC)

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 19: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Structure training

19

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

Metallic and composite courses

Covering each stage of the damage assessment and repair workflow

Damage assessment courses

Standard and specialized practices courses

Repair engineering courses

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 20: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Focus on Composite training

20

Basic or Advanced Composite repair

Radome repair

Composite Repair Engineering

COMPOSITE COURSES

FLIGHT TRAINING

FLIGHT OPERATIONS TRAINING

CABIN TRAINING

MAINTENANCE TRAINING

STRUCTURE TRAINING

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 21: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Introduction

Training philosophy and availability

Training portfolio

Conclusion

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 21

Agenda

Page 22: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

Exploring new perspectives

22

e-Learning:

on your terms and at your pace

Same pedagogical content as in traditional Airbus training courses

Savings on travel and living expenses

Higher availability of staff

Mobile solutions:

bringing Airbus expertise at your place

To address initial and recurrent training needs

Reduced development costs, travel and living expenses

Creating value for customer’s business

Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014

Page 23: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23

Training Contact

Details of courses and prerequisites

Course planning

Discussing specific competences needs and requirements

For further information:

[email protected]

Page 24: Training SIASA... · Our training philosophy ... A320 A330 A350 15 days 15 days 11 days* ... A350 / A380 ECAM Customization Weight and Balance Safety

SIASA project

This project is funded by the European Union and implemented by EASA.

End slide