siberian heat saving company · in the autumn of 2009 in moscow children's educational...

Saving Company

Siberian Heat

– liquid, ultra-thin, heat-insulating material. It consists of microscopic vacuum ceramic microspheres (diameter 0.03-0.08 mm), which are in the liquid composition on the similarity of the paint. After drying form a flexible coating. The layer thickness of 0.5 mm are arranged around 20 layers of vacuum microspheres. They create a thermal barrier and prevent the passage of heat flow.

Heat flow

2

Siberian Heat Saving Company

Thermal insulation efficiency

, applied a layer of 1 mm., similar efficiency 50 mm. polyurethane foam.

3

1 mm – TSM Ceramic

50 mm – Polyurethane foam

50 mm – Mineral wool


4

Galvanized iron

Ruberoid

Vapor insulation

Mats sewed

Undercoat (2 layers) ‏

Traditional heat insulation

Material operated at temperatures from -60 ° C to + 260 ° C. The temperature of the surface to be coated is from + 5 ° C to + 150 ° C.

The coating has a guarantee of 10 years, and service life of over 30 years

The cost of working with the material less than the cost of conventional solutions


Material is applied to the surface of any shape with a brush or spray: metal, concrete, brick, wood, plastic, drywall and other.

metal

concrete brick wood

drywall

plastic

5


6

60-70%

30% 45%

0.6 mm

2 dB

0,03g / cm³


+5 +150 С˚.

30 years

7


Walls, floors, ceilings, roofs of residential and industrial

buildings, both from the inside and outside

Metal structures

Hangars and garages

Balconies, loggias

Country houses, cottages

Eliminating the «bridges of cold»

Energy-saving material is widely used for insulation in construction:

8


Effectiveness of material is proved not only in the harsh Siberian conditions, but also in many other regions of Russia: Yuzhno-Sakhalinsk, 28 residential buildings were completely insulated for 47 days. The cost of insulation is 2 times lower hinged facades and 7 times faster

Yuzhno-Sakhalinsk - thermal insulation of facades, tinting in any color

9


In the autumn of 2009 in Moscow children's educational institution made the facade insulation

using coating thickness of 1 mm., the thickness of pipeline coating 0.5-2.5 mm.

After applying the material FCM Ceramic reduced coolant flow rate by 55%

The thermal resistance of the wall increased by 30.5% 10


Krasnoyarsk, insulation of the cottage

is successfully used for thermal insulation of houses and sports facilities.

Krasnoyarsk, insulation of the ice rink from the inside

11


Krasnoyarsk - warming of the base and a rampant, eliminating «bridges of cold»

BC "Gold"

Krasnoyarsk - insulation of the facade of the Big Concert Hall

, due to its structure allows you to insulate the complex constrained designs that are not insulated by conventional methods

Krasnoyarsk, settlement Pines - warming wood walls

Krasnoyarsk, apartment pr.Svobodny - floor insulation

12


Lower operating costs during the heating season, by reducing heat loss.

Lower operating costs for air conditioning indoors, by insulating of the roof and walls of the

building.

Reducing direct costs of the construction of buildings and structures due to the possibility of

reducing the thickness of the walls, the size of the foundations.

The possibility of replacing cumbersome insulation systems of facades, walls of buildings by the

material TSM Ceramics.

High service life of the material (at least 30 years).

13


TSM Ceramic is widely used in heat and power engineering

Pipelines of thermal heating systems Steam lines and gas pipelines Air conditioning systems Pipes with cold water (to avoid condensation)‏ Steam boilers Valving Tanks and reservoirs

14


Achinsk, "Rosneft" Insulation of the storage tanks of petroleum products

is successfully used for thermal insulation of tanks and gas-holders.

15


Insulation of water and oil tanks

used for insulating oil and gas pipelines as a ground and underground installation.

16


Insulation of locomotive cabin

widely used for thermal insulation of carriages and locomotives

17


Insulating of heating main Insulation of pipelines

Krasnoyarsk, PNS North - insulation of pipelines and equipment

18


Competitive price of in comparison to commonly used insulation..

Reduced labor costs and time using by simplicity and ease of handling.

Reducing of repair costs due to accidents visibility and easy maintainability.

Reducing of the cost of thermal energy saving in pipes, boilers, etc. due to the high thermal insulation characteristics of the and full insulation of pipes, boilers, etc., even in the most hard to reach places.

The possibility of applying directly the to hot surface (up to 150 C) without stopping current district heating network or boiler.

Reducing of the repair costs of thermal insulation by increasing the warranty period, compared with standard insulation.

No costs for the restoration of the insulation due to lack of the possibility of secondary use (vandal resistance)

19


TSM Group

Moscow, Sushchevskiy Val Street 16/4 phone: +7-499-301-01-22 e-mail: [email protected]

www.tsm-g.com

20

siberian heat saving company · in the autumn of 2009 in moscow children's educational...

Documents