GoMTC.com/Battery

Side Mount Attach-A-PullerSpecification Sheet

Portable Battery ChangersModel ABP-40SD-49M-36, ABP-40SD-49M-48,

ABP-40SD-49V-36, ABP-40SD-49V-48

2

ABP-40SD-49 Dimensions (See Chart)

Side Mount Attach-A-Puller

The MTC Side Mount Attach-A-Puller (ABP-SD) is a flexible and economical attachment for existing fork lift trucks in systems using European style truck batteries. The ABP-SD draws its power from the truck battery, and with 24, 36, 48, volt models available, you can be assured the ABP-SD will work with most existing fork trucks. The ABP-SD comes with magnetic or vacuum extraction and the tethered removable control switch allows operation from either side of the unit for easy adaptability to a wide variety of applications.

3

Notes1. Specifications subject to change without notice.

2. Both models available with magnet or vacuum cup attachment per customer request.

3. Performance may vary +/- 5% due to system efficiency tolerance. The performance shown represents nominal values obtained under typical operating conditions.

Side Mount Attach-A-Puller

GENERAL INFORMATIONABP-24SD-49-MABP-24SD-49-V

ABP-40SD-49-MABP-40SD-49-V

1 Maximum Load Capacity with 48 ̋ forks 3,000 3,000

2 Maximum Load Capacity with 60 ̋ forks 5,000 5,000

3 Battery Attachment Mechanism Magnet or Vacuum Cup Magnet or Vacuum Cup

4 System Voltage 24, 36, 48 Volt 24, 36, 48 Volt

Battery Connector SB175 Gray SB175 Gray

5 Standard Model Color (Optional Colors available) Yellow Yellow

6 Roller Diameter 2.25 ̋ 5.7 cm 2.25 ̋ 5.7 cm

7 Roller Shaft Size 0.687 ̋ 1.7 cm 0.687 ̋ 1.7 cm

8 Push/Pull Drive Chain Size #40 #40

REACH INFORMATIONA Magnet Reach (draw bar fully extended) 9.25 ̋ 23.5 cm 9.25 ̋ 23.5 cm

A1 Vacuum Cup Reach (draw bar fully extended) 7 ̋ 17.8 cm 7 ̋ 17.8 cm

BASIC DIMENSIONS

B Vacuum Cup Size (Standard/Optional)10 ̋ round / 7 ̋ × 12 ̋ 10 ̋ round / 7 ̋ × 12 ̋

25.4 cm round / 17.8 cm × 30.4 cm 25.4 cm round / 17.8 cm × 30.4 cm

C Overall Length 63.5 ̋ 161 cm 63.5 ̋ 161 cm

D Overall Width 33.5 ̋ 85 cm 49.5 ̋ 125.7 cm

E Overall Height 27 ̋ 68.6 cm 27 ̋ 68.6 cm

G Battery Compartment Width 25 ̋ 63.5 cm 40.5 ̋ 102.9 cm

H Maximum Battery Length 49 ̋ 124.5 cm 49 ̋ 124.5 cm

I Maximum Battery Width 24 ̋ 60.9 cm 40 ̋ 101.6 cm

J Maximum Battery Height 35 ̋ 88.9 cm 35 ̋ 88.9 cm

K Minimum Battery Length 13.5 ̋ 34.3 cm 13.5 ̋ 34.3 cm

L Minimum Battery Width 8.5 ̋ 21.6 cm 8.5 ̋ 21.6 cm

M Minimum Battery Height 19 ̋ 48.2 cm 19 ̋ 48.2 cm

N Minimum Required Pallet Truck Fork Length 48 ̋ 121.9 cm 48 ̋ 121.9 cm

P Fork Pockets (Centerline to Centerline) 32 ̋ 81.3 cm 32 ̋ 81.3 cm

R R-Height 3.25 ̋ 8.25 cm 3.25 ̋ 8.25 cm

WEIGHTSS Service Weight Excluding Fork Truck and Battery 670 lbs. 303.9 kg 670 lbs. 303.9 kg

PERFORMANCET Rated Draw Bar Pull 700 lbs. 317.5 kg 700 lbs. 317.5 kg

U Arm Travel Feet Per Minute 22 FPM 22 FPM

P.O. Box 1358 Temple, Texas 76503 USAPhone: (254) 298-2900 • US (800) 433-3110

Fax: (254) 771-0287Email: Battery@GoMTC.com

GoMTC.com/Battery

Side Mount ABP Features and Benefits

Features

• Mounts to your existing fork truck

• Powered vacuum/electro-magnet extraction

• 24, 36, 48 volt models available

• 24 ̋ and 40 ̋ wide battery compartments

• Attach-A-Puller controls provide for operation from either side

• Powered by fork truck battery

• Mechanical battery safety stop

• “Raise/Lower” function of fork truck adjusts the roller height of Attach-A-Puller unit

Benefits

• Keeps cost of back up battery changing system low by adapting to existing equipment

• Reliable, powerful and consistent battery attachment

• Ensures that Attach-A-Puller will work with existing fork truck

• Capable of handling essentially all lift truck battery sizes

• Allows easy adaptability to various applications

• Eliminates the need for an additional power source

• Protects operator and surrounding personnel from possible injury during battery transport

• Keeps cost of Attach-A-Puller low by relying on fork truck lift

Battery Safety Gate

Control Switch

Carriage

Fork Pockets

Magnet Assembly