siemens space - itu.int · pdf fileslide: 3 © siemens ag ... the selected...

19
© Siemens AG Austria 2010. All rights reserved. Siemens Space SIECAMS Siemens Satellite Monitoring System

Upload: lyliem

Post on 28-Mar-2018

213 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2010. All rights reserved.

SIECAMS

Siemens Space

SIECAMS Siemens Satellite Monitoring System

Page 2: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 2

SIECAMS Benefits

Multi-site and multi-satellite system based on state of the art SW technology

Less investment through optimal use of resources and existing infrastructure

Highly configurable - will grow with your business expansion

Modular design to meet future requirements

Long term operational live (10 years minimum)

Page 3: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 3

SIECAMS

Fast and accurate measurements of Digital Carriers (IDR, DVB-S(2), VSAT...) Analogue FM-TV Carriers TDMA, CW, CW-EDF

Ka-band monitoring – measurement of transponder signals with up to 250MHz

Demodulation and decoding of all carriers

Blind scan through automatic carrier detection

Hidden carrier detection (interference)

Cross-polar isolation measurements without interruption of operational services

Transponder performance measurements (transponder gain transfer curve and operating point)

Fully integrated geolocation system Antenna Pattern Verification Automatic path calibration

Key Features

Page 4: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 5

SIECAMS

Multi Site Interface independent measurement at any site in a multi site architecture

MonitoringSite 1 RF

SIECAMS Base

Enhanced Applications

Central Site MSE)

Measurement Device

Front End

Controller

Monitoring Site 2 RF RF

Front End

Controller

Multi Site Interface

LAN

WAN

RF RF

Monitoring Site n

Front End

Controller

Measurement Device

Measurement Device

Measurement Device

Measurement Device

Client application

Client application

Client application

Multi site architecture

Page 5: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 8

SIECAMS

SIECAMS BOX Components

Optional Components

The SIECAMS BOX combines the entire SIECAMS monitoring software with a powerful DSP monitoring device on one single rack mount server.

SIECAMS BOX

Page 6: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 10

SIECAMS

The main status window provides access to the configuration explorer, the different measurement modes as well as to the reports. It also gives an overview of the alarms and the status of all measurement sites.

Main status window

Page 7: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 11

SIECAMS

Basically, the real time carrier mode permits to define the most important settings of a monitoring device, visualize the spectrum of the signal received by that device and store/retrieve the displayed spectra

Real Time Carrier Mode

Page 8: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 12

SIECAMS

This mode is specifically designed to assist the operator during line-up activities. It provides continuous scanning of the portion of a transponder that hosts the carrier to be up-linked (lined up). It provides visualization of the co- and cross-polar spectra and measurement of the associated polarization isolation.

Line Up Mode

Page 9: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 13

SIECAMS

The Selected Carrier Mode, can be used to continuously monitor a user defined group of carriers/beacons. The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options. After the operator has activated the measurement cycle, a list showing the measurement results in real time will be displayed.

Selected Carrier Mode

Page 10: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 14

SIECAMS

In contrast to the Selected Carrier Mode functionality, the selected carriers are automatically demodulated and decoded. Furthermore, this measurement mode provides accurate isolation measurements between co- and cross-polarization signal.

DSP Selected Carrier Mode

Page 11: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 15

SIECAMS

In this mode, the system executes a one-shot scanning of a transponder / transponder portion selected by the user including spurious signal detection.

Selected Band Mode

Page 12: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 16

SIECAMS

Hidden Carrier Detection

Page 13: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 17

SIECAMS

SIECAMS is the only system able to perform demodulation measurements of transponder signals with an instantaneous bandwidth of up to 250MHz. The Key Benefits of the Wideband DSP System for the customer are: 250MHz instantaneous bandwidth means monitoring of ka-band transponders in one snapshot. No need to concatenate several measurements. Detection and classification of carriers with an occupied bandwidth of up to 250MHz All the SIECAMS DSP functionalities like blind scanning or hidden carrier analysis can be applied. Highly scalable and flexible –measurement devices can be easily added to increase the performance of the system -> reduces round robin measurement time of satellite traffic Cost effective – compared to DSP devices from R&S or Agilent, the SIECAMS BOX provides a fully integrated cost effective monitoring solution.

Ka-band Monitoring

Page 14: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 18

SIECAMS

Passive gain transfer curve measurement (no interruption of operational services, non intrusive)

Provides AM/AM and AM/PM curve

Displays operating and saturation point

IBO / OBO measurement

1 dB compression point measurement

Transponder Performance Measurement

Page 15: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 19

SIECAMS

SIECAMS – the Siemens Carrier Monitoring System has a built-in geo-location system ILS - Interference Localization System Benefits Start localization of a detected interferer by simply clicking the „ILS“ button Automatic transfer of all relevant data from CMS to ILS -> Simplifies significantly the

ILS configuration Automatic selection of the best suitable adjacent satellite Automatic selection of the best suitable reference carriers Automatic selection of the best measurement settings for interferers and reference

carriers Correcting position error introduced by wrong ephemeris data

Geolocation system ILS – Fully integrated in SIECAMS

Page 16: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 20

SIECAMS

Siecams CMS

DSP DSP

Flight Dynamics

Main Satellite experiencing Interference

Second (Adjacent) Satellite

Unknown Transmitter station

Receiving Antennas

Signal Acquisition

units

Siecams ILS Signal

processing

Geolocation processing

Common database for CMS and ILS

Interference localization system ILS Functional Block Diagram

Page 17: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 21

SIECAMS

Calculated position of interferers transmit station

TDOA line

FDOA line

Error ellipse

Uplink stations stored in the CMS database

Interference localization system ILS Map display

Page 18: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 22

SIECAMS

Antenna verification provides for a range of tests of any antenna to ensure its conformance with specified antenna standards.

Antenna Pattern Verification

Page 19: Siemens Space - itu.int · PDF fileSlide: 3 © Siemens AG ... The selected carriers/beacons are measured in a round robin cycle according to configurable scheduling options

© Siemens AG Austria 2012. All rights reserved Slide: 24

SIECAMS

SIECAMS is already installed at some major satellite operators, like Eutelsat and Intelsat. But SIECAMS is not only for interest for large satellite operators but due to its scalability also for small satellite and telecom operators.

References