sign post hardware section - dynabrackets.com · by far the most widely used style of sign brackets...
TRANSCRIPT
Page 3
www.dynabrackets.com Page 3 [email protected]
Sign & Post Hardware Section (catalogue pages 4‐33)
Sign & Post Hardware section contains: Sign Brackets Booklet Stainless Steel Strapping, Buckles & Tools Booklet Sign Post Accessories Booklet
Issue 23
Page 4
www.dynabrackets.com Page 4 [email protected]
HS-1 and HS-4 Center Mount Sign Bracket This patented bracket design is perfect for single or back-to-back sign mounting on round posts. This design also allows for easy installation with only one typical 9/16” wrench. The HS series sign bracket is reusable and 360° adjustable to mount signs in any direction. Our design does not require any labour-intensive drilling into sign posts which eliminates damage to city property. These brackets are manufactured from extruded aluminum, which is extremely strong yet flexible enough to increase clamping pressure for a more safe and secure installation.
HS-1 Installation Specifications:
For Center-Mounting Signs
Part No: Fasteners Included:
HS-1 (U) None
HS-1-ZP Zinc Plated Nuts and Bolts
HS-1-SS Stainless Steel Nuts and Bolts
Pre-assembled as shown for convenience Additional 3/8” nuts and bolts are available for back-to-back sign mounting Vandal resistant nuts are available to reduce theft and vandalism
• Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Clamps To 2-3/8” Round Posts
HS-4 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Clamps to 4” Round Posts
Part No: Fasteners Included:
HS-4 (U) None
HS-4-ZP Zinc Plated Nuts and Bolts
Pre-assembled as shown for convenience Additional 3/8” nuts and bolts are available for back-to-back sign mounting Vandal resistant nuts are available to reduce theft and vandalism
HS-4-SS Stainless Steel Nuts and Bolts
Page 5
www.dynabrackets.com Page 5 [email protected]
Z238-4.5R1.00 Center Mount Sign Bracket This interlocking sign bracket is used to center mount signs onto 2 3/8” round posts. It features a built-in 4.5” sign support and ribs incorporated into the design for increased clamping pressure to prevent the sign from spinning. A back-to-back attachment is also available. This sign bracket is reusable and 360° adjustable to mount signs in any direction. Our design does not require any labour-intensive drilling into sign posts which eliminates damage to city property. These brackets are manufactured from extruded aluminum, which is extremely strong yet flexible enough to increase clamping pressure for a more safe and secure installation.
Z238-4.5R1.00 Installation Specifications:
For Center-Mounting Signs
Part No: Fasteners Included:
Z238-4.5R1.00 (U) None
Z238-4.5R1.00 (ZP) Zinc Plated Nuts and Bolts
Z238-4.5R1.00 (SS) Stainless Steel Nuts and Bolts
Built-in 4.5” backing for extra sign support Z238-4.5BB1.00 bracket is available for back-to-back sign mounting Vandal resistant nuts and bolts are available to reduce theft and vandalism
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Clamps To 2-3/8” Round Posts
Z238-4.5BB1.00 Installation Specifications:
For Back-to-Back Sign Mounting
Part No: Fasteners Included:
Z238-4.5BB1.00 (U) None
Z238-4.5BB1.00 (ZP) Zinc Plated Nuts and Bolts
Z238-4.5BB1.00 (SS) Stainless Steel Nuts and Bolts
Built-in 4.5” backing for extra sign support Works with Z238-4.5R1.00 series brackets Vandal resistant nuts are available to reduce theft and vandalism
• Sign-to-Bracket Installation • 5/16” Bolt Thru Sign Mounting • Bolts to Z238-4.5R1.00
Page 6
www.dynabrackets.com Page 6 [email protected]
BB-12 Installation Specifications:
For Center-Mounting Signs
Fits Up To 3/4” Wide Band
Part No: Fasteners Included:
BB-12 (U) None
BB-12 (ZP) Zinc Plated Nuts and Bolts
BB-12 (SS) Stainless Steel Nuts and Bolts
12” sign support backing Vandal resistant nuts and bolts are available to reduce theft and vandalism
• Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting: - 10” Center to Center • Straps To 1-1/2”+ Round, 1-1/2”+ Square, All Lamp Posts
SB-008 Installation Specifications:
For Center-Mounting Signs
Fits Up To 3/4” Wide Band
Part No: Fasteners Included:
SB-008 (U) None
SB-008 (SS) Stainless Steel Bolts and Washers and Nylon Washers
Holes of bracket are threaded so there is no need for nuts Vandal resistant bolts are available to reduce theft and vandalism
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 4”+ Round, 2-1/2”+ Square, All Lamp Posts
FB-021 D021 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 4”+ Round, 2-1/2”+ Square, All Lamp Posts Dyna Brand
Fits Up To 3/4” Wide Band Band-It Brand Fits Up To 3/4” Wide Band
Part No: Part No: Fasteners Included:
FB-021 (U) - None
FB-021 (SS) D021 Stainless Steel Bolts and Washers and Nylon Washers
Center hole of bracket is threaded so there is no need for a nut Vandal resistant bolts are available to reduce theft and vandalism
SB-001 D001 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 2-4” Round, 2”+ Square, All Lamp Posts Dyna Brand
Fits Up To 3/4” Wide Band Band-It Brand Fits Up To 3/4” Wide Band
Part No: Part No: Fasteners Included:
SB-001 (U) - None
SB-001 (SS) D001 Stainless Steel Bolts and Washers and Nylon Washers
Center hole of bracket is threaded so there is no need for a nut Vandal resistant bolts are available to reduce theft and vandalism
Page 7
www.dynabrackets.com Page 7 [email protected]
All-Sign Top Mounts & Crosspieces This unique line of top mounts and crosspieces use a bolt thru style sign mounting without a sign slot. This way it is compatible with both standard flat and extruded signs as well as any thickness of other signs.
4-CA45 Installation Specifications:
For Stacking Signs At 45°
Sign Angle: 45°
Part No: Fasteners Included:
4-CA45 (U) None
4-CA45 (ZP) Zinc Plated Nuts and Bolts
4-CA45 (SS) Stainless Steel Nuts and Bolts
7” Sign Holder Vandal resistant nuts and bolts are available to reduce theft and vandalism
• Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting: - 5” Center to Center - 1/2” From Bottom Edge to Center
2-RA238 3-RA238 Installation Specifications:
For Top Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - 5” Center to Center - 1/2” From Bottom Edge to Center • Clamps to 2-3/8” Round Posts
Part No: Part No: Fasteners Included:
2-RA238 (U) 3-RA238 (U) None
2-RA238-ZP 3-RA238-ZP Zinc Plated Nuts and Bolts
2-RA238-SS 3-RA238-SS Stainless Steel Nuts and Bolts
6” Sign Holder Vandal resistant nuts and bolts are available to reduce theft and vandalism
2-CA90 3-CA90 Installation Specifications:
For Stacking Signs At 90° • Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting - 5” Center to Center - 1/2” From Bottom Edge to Center
Sign Angle: 90°
Sign Angle: 90°
Part No: Part No: Fasteners Included:
2-CA90 (U) 3-CA90 (U) None
2-CA90 (ZP) 3-CA90 (ZP) Zinc Plated Nuts and Bolts
2-CA90 (ZP) 3-CA90 (SS) Stainless Steel Nuts and Bolts
6” Sign Holder Vandal resistant nuts and bolts are available to reduce theft and vandalism
2-RA238
3-RA238
2-CA90
3-CA90
Page 8
www.dynabrackets.com Page 8 [email protected]
5-1/2” Top Mounts & Crosspieces By far the most widely used style of sign brackets in North America, Dyna Engineering’s line of 5-1/2” sign brackets are manufactured from high-pressure die cast aluminum. All brackets undergo a low-sheen vibratory polishing allowing for easy handling without sharp corners while leaving an attractive surface finish. Brackets are available in this style for post mounting signs to round, U-channel or square posts. Designed with a bolt clearance hole, these brackets can mount signs by bolt thru or set screw. For sign installations using set screws, only 25-40 inch pounds of torque is required to safely secure a sign.
5-CX90 Installation Specifications:
• Sign-to-Sign Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center
Sign Angle: 90° Slot Width: 0.305”
Sign Angle: 90° Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-CX90 (U) 5-CF90 (U) None
5-CX90 (ZP) 5-CF90 (ZP) Zinc Plated Set Screws
5-CX90 (ZPV) 5-CF90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-CX90 (ZPVB) 5-CF90 (ZPVB) Zinc Plated Vandal Resistant Bolts*
5-CX90 (SS) 5-CF90 (SS) Stainless Steel Set Screws
5-CX90 (SSV) 5-CF90 (SSV) Stainless Steel Vandal Resistant Set Screws*
5-CX90 (SSVB) 5-CF90 (SSVB) Stainless Steel Vandal Resistant Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Stacking Signs At 90°
5-CF90
5-RX238 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-3/8” Round Posts
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-RX238 (U) 5-RF238 (U) None
5-RX238 (ZP) 5-RF238 (ZP) Zinc Plated Set Screws
5-RX238 (ZPV) 5-RF238 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-RX238 (ZPVB) 5-RF238 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-RX238 (SS) 5-RF238 (SS) Stainless Steel Set Screws
5-RX238 (SSV) 5-RF238 (SSV) Stainless Steel Vandal Resistant Set Screws*
5-RX238 (SSVB) 5-RF238 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs
5-RF238
Page 9
www.dynabrackets.com Page 9 [email protected]
5-SX134 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-3/4” Square Posts
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-SX134 (U) 5-SF134 (U) None
5-SX134 (ZP) 5-SF134 (ZP) Zinc Plated Set Screws
5-SX134 (ZPV) 5-SF134 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-SX134 (ZPVB) 5-SF134 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-SX134 (SS) 5-SF134 (SS) Stainless Steel Set Screws
5-SX134 (SSV) 5-SF134 (SSV) Stainless Steel Vandal Resistant Set Screws*
5-SX134 (SSVB) 5-SF134 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs
5-SF134
5-SX200 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2” Square Posts
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-SX200 (U) 5-SF200 (U) None
5-SX200 (ZP) 5-SF200 (ZP) Zinc Plated Set Screws
5-SX200 (ZPV) 5-SF200 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-SX200 (ZPVB) 5-SF200 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-SX200 (SS) 5-SF200 (SS) Stainless Steel Set Screws
5-SX200 (SSV) 5-SF200 (SSV) Stainless Steel Vandal Resistant Set Screws*
5-SX200 (SSVB) 5-SF200 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs
5-SF200
Page 10
www.dynabrackets.com Page 10 [email protected]
5-UX90 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel, 1-3/4”+ Square Posts
Sign Angle: 90° Slot Width: 0.305”
Sign Angle: 90° Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-UX90 (U) 5-UF90 (U) None
5-UX90 (ZP) 5-UF90 (ZP) Zinc Plated Set Screws and Bolts
5-UX90 (ZPV) 5-UF90 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-UX90 (ZPVB) 5-UF90 (ZPVB) Zinc Plated Vandal Resistant Bolts*
5-UX90 (SS) 5-UF90 (SS) Stainless Steel Set Screws and Bolts
5-UX90 (SSV) 5-UF90 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-UX90 (SSVB) 5-UF90 (SSVB) Stainless Steel Vandal Resistant Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs At 90°
5-UF90
5-UX180 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel, 1-3/4”+ Square Posts
Sign Angle: 180° Slot Width: 0.305”
Sign Angle: 180° Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-UX180 (U) 5-UF180 (U) None
5-UX180 (ZP) 5-UF180 (ZP) Zinc Plated Set Screws and Bolts
5-UX180 (ZPV) 5-UF180 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-UX180 (ZPVB) 5-UF180 (ZPVB) Zinc Plated Vandal Resistant Bolts*
5-UX180 (SS) 5-UF180 (SS) Stainless Steel Set Screws and Bolts
5-UX180 (SSV) 5-UF180 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-UX180 (SSVB) 5-UF180 (SSVB) Stainless Steel Vandal Resistant Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs At 180°
5-UF180
Page 11
www.dynabrackets.com Page 11 [email protected]
5” Notched Top Mounts & Crosspieces A great design to keep signs held more securely inside of the sign slot. These notched style locking brackets are designed so that the sign blade must be loaded into the bracket by sliding the sign into the slot sideways instead of from the top. Dyna Engineering’s line of 5” sign brackets are manufactured from high-pressure die cast aluminum. All brackets undergo a low-sheen vibratory polishing allowing for easy handling without sharp corners while leaving an attractive surface finish. Brackets are available in this style for post mounting signs to round, U-channel or square posts. For sign installations using set screws, only 25-40 inch pounds of torque is required to safely secure a sign.
8-CX90 Installation Specifications:
For Stacking Signs At 90° • Sign-to-Sign Installation • 5/16” Set Screw Sign Mounting
Sign Angle: 90° Slot Width: 0.305”
Part No: Fasteners Included:
8-CX90 (U) None
8-CX90 (ZP) Zinc Plated Set Screws
8-CX90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-CX90 (ZPHB) Zinc Plated Hex Bolts
8-CX90 (SS) Stainless Steel Set Screws
8-CX90 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-CX90 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
8-RX238 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Set Screws To 2-3/8” Round Posts
Slot Width: 0.305”
Part No: Fasteners Included:
8-RX238 (U) None
8-RX238 (ZP) Zinc Plated Set Screws
8-RX238 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-RX238 (ZPHB) Zinc Plated Hex Bolts
8-RX238 (SS) Stainless Steel Set Screws
8-RX238 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-RX238 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 12
www.dynabrackets.com Page 12 [email protected]
8-SX134 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Set Screws To 1-3/4” Square Posts
Slot Width: 0.305”
Part No: Fasteners Included:
8-SX134 (U) None
8-SX134 (ZP) Zinc Plated Set Screws
8-SX134 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-SX134 (ZPHB) Zinc Plated Hex Bolts
8-SX134 (SS) Stainless Steel Set Screws
8-SX134 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-SX134 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
8-SX200 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Set Screws To 2” Square Posts
Slot Width: 0.305”
Part No: Fasteners Included:
8-SX200 (U) None
8-SX200 (ZP) Zinc Plated Set Screws
8-SX200 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-SX200 (ZPHB) Zinc Plated Hex Bolts
8-SX200 (SS) Stainless Steel Set Screws
8-SX200 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-SX200 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 13
www.dynabrackets.com Page 13 [email protected]
8-UX90 Installation Specifications:
For Top-Mounting Signs At 90° • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Bolts To U-Channel, 1-3/4”+ Square Posts
Sign Angle: 90° Slot Width: 0.305”
Part No: Fasteners Included:
8-UX90 (U) None
8-UX90 (ZP) Zinc Plated Set Screws
8-UX90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-UX90 (ZPHB) Zinc Plated Hex Bolts
8-UX90 (SS) Stainless Steel Set Screws
8-UX90 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-UX90 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
8-UX180 Installation Specifications:
For Top-Mounting Signs At 180° • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Bolts To U-Channel, 1-3/4”+ Square Posts
Sign Angle: 180° Slot Width: 0.305”
Part No: Fasteners Included:
8-UX180 (U) None
8-UX180 (ZP) Zinc Plated Set Screws
8-UX180 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-UX180 (ZPHB) Zinc Plated Hex Bolts
8-UX180 (SS) Stainless Steel Set Screws
8-UX180 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-UX180 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 14
www.dynabrackets.com Page 14 [email protected]
12” Top Mounts & Crosspieces Designed for the need of increasingly larger signs, these brackets can accommodate standard 9” tall street name signs. Dyna Engineering’s line of 12” length sign brackets are manufactured from high-pressure die cast aluminum. All brackets undergo a low-sheen vibratory polishing allowing for easy handling without sharp corners while leaving an attractive surface finish. Brackets are available in this style for post mounting signs to round, U-channel or square posts. Designed with a bolt clearance hole, these brackets can mount signs by bolt thru or set screw. For sign installations using set screws, only 25-40 inch pounds of torque is required to safely secure a sign.
12-CX90 Installation Specifications:
• Sign-to-Sign Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center
Sign Angle: 90° Slot Width: 0.320”
Sign Angle: 90° Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-CX90 (U) 12-CF90 (U) None
12-CX90 (ZP) 12-CF90 (ZP) Zinc Plated Set Screws
12-CX90 (ZPV) 12-CF90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
12-CX90 (ZPVB) 12-CF90 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-CX90 (SS) 12-CF90 (SS) Stainless Steel Set Screws
12-CX90 (SSV) 12-CF90 (SSV) Stainless Steel Vandal Resistant Set Screws*
12-CX90 (SSVB) 12-CF90 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Stacking Signs At 90°
12-CF90
12-RX238 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-3/8” Round Posts
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-RX238 (U) 12-RF238 (U) None
12-RX238 (ZP) 12-RF238 (ZP) Zinc Plated Set Screws
12-RX238 (ZPV) 12-RF238 (ZPV) Zinc Plated Vandal Resistant Set Screws*
12-RX238 (ZPVB) 12-RF238 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-RX238 (SS) 12-RF238 (SS) Stainless Steel Set Screws
12-RX238 (SSV) 12-RF238 (SSV) Stainless Steel Vandal Resistant Set Screws*
12-RX238 (SSVB) 12-RF238 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs
12-RF238
Page 15
www.dynabrackets.com Page 15 [email protected]
12-SX134 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-3/4” Square Posts
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-SX134 (U) 12-SF134 (U) None
12-SX134 (ZP) 12-SF134 (ZP) Zinc Plated Set Screws and Bolts
12-SX134 (ZPV) 12-SF134 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-SX134 (ZPVB) 12-SF134 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-SX134 (SS) 12-SF134 (SS) Stainless Steel Set Screws and Bolts
12-SX134 (SSV) 12-SF134 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
12-SX134 (SSVB) 12-SF134 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs
12-SF134
12-SX200 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2” Square Posts
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-SX200 (U) 12-SF200 (U) None
12-SX200 (ZP) 12-SF200 (ZP) Zinc Plated Set Screws and Bolts
12-SX200 (ZPV) 12-SF200 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-SX200 (ZPVB) 12-SF200 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-SX200 (SS) 12-SF200 (SS) Stainless Steel Set Screws and Bolts
12-SX200 (SSV) 12-SF200 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
12-SX200 (SSVB) 12-SF200 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs
12-SF200
Page 16
www.dynabrackets.com Page 16 [email protected]
12-UX90 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel, 1-3/4”+ Square Posts
Sign Angle: 90° Slot Width: 0.320”
Sign Angle: 90° Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-UX90 (U) 12-UF90 (U) None
12-UX90 (ZP) 12-UF90 (ZP) Zinc Plated Set Screws and Bolts
12-UX90 (ZPV) 12-UF90 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-UX90 (ZPVB) 12-UF90 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-UX90 (SS) 12-UF90 (SS) Stainless Steel Set Screws and Bolts
12-UX90 (SSV) 12-UF90 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
12-UX90 (SSVB) 12-UF90 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs At 90°
12-UF90
12-UX180 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel, 1-3/4”+ Square Posts
Sign Angle: 180° Slot Width: 0.320”
Sign Angle: 180° Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-UX180 (U) 12-UF180 (U) None
12-UX180 (ZP) 12-UF180 (ZP) Zinc Plated Set Screws and Bolts
12-UX180 (ZPV) 12-UF180 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-UX180 (ZPVB) 12-UF180 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-UX180 (SS) 12-UF180 (SS) Stainless Steel Set Screws and Bolts
12-UX180 (SSV) 12-UF180 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
12-UX180 (SSVB) 12-UF180 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Signs At 180°
12-UF180
Page 17
www.dynabrackets.com Page 17 [email protected]
6-WPX4 Installation Specifications:
• Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Screws To Nominal 4” Wood Posts (Actual Up To 3.58” SQ)
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
6-WPX4 (U) 6-WPF4 (U) None
6-WPX4 (ZP) 6-WPF4 (ZP) Zinc Plated Set Screws
6-WPX4 (ZPV) 6-WPF4 (ZPV) Zinc Plated Vandal Resistant Set Screws*
6-WPX4 (SS) 6-WPF4 (SS) Stainless Steel Set Screws
6-WPX4 (SSV) 6-WPF4 (SSV) Stainless Steel Vandal Resistant Set Screws*
3-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
For Top-Mounting Or End-Mounting Signs
6-WPF4
Page 18
www.dynabrackets.com Page 18 [email protected]
Windless® Overhead Sign Mounts These extremely strong and durable overhead sign brackets are constructed from high tensile aluminum alloy and assembled with stainless steel fasteners for complete corrosion resistance. We’ve also equipped the bracket with specialized oil-impregnated brass Oilite® bushings to self-lubricate the swinging components for a low-maintenance overhead sign system. In comparison to other cast aluminum overhead brackets which have a higher likelihood to crack or fracture under high stress windloads, Dyna Engineering’s Windless® Overhead Sign Mount brackets are designed to withstand extreme winds in all weather conditions.
®
7-OM-A-2.5 7-OM-A-4
7-OM-F-2.5 7-OM-F-4
7-ADAPTER-5-1 (U) Add-on available for sign box mounting!
7-OM-A-2.5 7-OM-A-4 7-OM-F-2.5 7-OM-F-4 Installation Specifications:
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - 1-1/2” Center to Center • Straps To Any Overhead Mast Arms
Strap To Post Fits Up To 3/4” Wide Band 2-1/2” Saddle Size Adjustable Length
Strap To Post Fits Up To 3/4” Wide Band 4” Saddle Size Adjustable Length
Strap To Post Fits Up To 3/4” Wide Band 2-1/2” Saddle Size Fixed Length
Strap To Post Fits Up To 3/4” Wide Band 4” Saddle Size Fixed Length
Part No: Part No: Part No: Part No: Fasteners Included:
7-OM-A-2.5 (U) 7-OM-A-4 (U) 7-OM-F-2.5 (U) 7-OM-F-4 (U) No Sign Fasteners But Includes Pre-Assembly (shown below)
7-OM-A-2.5 (SS) 7-OM-A-4 (SS) 7-OM-F-2.5 (SS) 7-OM-F-4 (SS) Stainless Steel Sign Fasteners And Includes Pre-Assembly
Easily convert to free-swing style by removing springs Easily adjustable for leveling signs to streets Complete corrosion resistant assembly Pre-assembled as shown for convenience Windless® design to release stress on posts and signs during high windloads Additional 7-ADAPTER-5-1 (U) available for backlit / sign box mounting
For Overhead Mounting Signs Equipped With Windless® Dampening System
Page 19
www.dynabrackets.com Page 19 [email protected]
All-Sign End Mounts This convenient line of end mounts use a bolt thru style sign mounting without a sign slot. This way it is compatible with both standard flat and extruded signs as well as any thickness of other signs. With the bolt-to-post hole centers lining up with 1” hole centers, these brackets can be mounted directly to standard 1” hole center telespar square posts without any labour-intensive drilling into sign posts which eliminates damage to city property. Similar to our other end mounts, these brackets can also be mounted to a post with stainless steel strapping.
LB-007 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Bolts/Straps To 2-3/8”+ Round, 1-1/4”+ Square, All Lamp Posts
Part No:
Fasteners Included:
LB-007 (U) None
LB-007 (SS) Stainless Steel Nuts, Bolts and Washers
Requires 2 brackets to mount 1 sign Vandal resistant nuts and bolts are available to reduce theft and vandalism
SS-50 Installation Specifications:
For End-Mounting Signs
Overall Length: 6”
Part No: Fasteners Included:
SS-50 (U) None
SS-50 (ZP) Zinc Plated Nuts and Bolts
SS-50 (SS) Stainless Steel Nuts and Bolts
Requires 2 halves to mount 1 sign Vandal resistant nuts and bolts are available to reduce theft and vandalism
• Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - 4-3/4” Center to Center - 3/4” From Edge To Center • Straps To 2-7/8”+ Round, 2”+ Square, All Lamp Posts
SS-3CC5 SS-3CC5.25 SS-10CC7 SS-10CC8 Installation Specifications:
• Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - Sign Hole Centers Shown In Left-Side Table - 3/8” From Edge To Center (If Bolting To Post) - 1/2” From Edge To Center (If Strapping To Post) • Bolts/Straps To 2-3/8”+ Round, 1-1/2”+ Square, All Lamp Posts
Sign Hole Centers: 5”
Sign Hole Centers: 5-1/4”
Sign Hole Centers: 7”
Sign Hole Centers: 8”
Part No: Part No: Part No: Part No: Fasteners Included:
SS-3CC5 (U) SS-3CC5.25 (U) SS-10CC7 (U) SS-10CC8 (U) None
SS-3CC5 (ZP) SS-3CC5.25 (ZP) SS-10CC7 (ZP) SS-10CC8 (ZP) Zinc Plated Nuts and Bolts
SS-3CC5 (SS) SS-3CC5.25 (SS) SS-10CC7 (SS) SS-10CC8 (SS) Stainless Steel Nuts and Bolts
Can bolt directly to telespar posts without any extra drilling Vandal resistant nuts and bolts are available to reduce theft and vandalism
For End-Mounting Signs
Page 20
www.dynabrackets.com Page 20 [email protected]
SS-406 SS-409 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - Sign Hole Centers Shown In Left-Side Table - 1/2” From Edge To Center • Straps To 2-3/8”+ Round, 2”+ Square, All Lamp Posts
Slot Width: 0.330” Sign Hole Centers: 5” Overall Length: 6”
Slot Width: 0.330” Sign Hole Centers: 8” Overall Length: 9”
Part No: Part No: Fasteners Included:
SS-406 (U) SS-409 (U) None
SS-406 (ZP) SS-409 (ZP) Zinc Plated Nuts and Bolts
SS-406 (SS) SS-409 (SS) Stainless Steel Nuts and Bolts
Vandal resistant nuts and bolts are available to reduce theft and vandalism
SS-104 SS-106 SS-107 SS-109 Installation Specifications:
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - Sign Hole Centers Shown In Left-Side Table - 3/8” From Edge To Center • Straps To 2-3/8”+ Round, 2-1/2”+ Square, All Lamp Posts
Slot Width: 0.185” Sign Hole Centers: 3” Overall Length: 4”
Slot Width: 0.185” Sign Hole Centers: 5” Overall Length: 6”
Slot Width: 0.185” Sign Hole Centers: 6” Overall Length: 7”
Slot Width: 0.185” Sign Hole Centers: 8” Overall Length: 9”
Part No: Part No: Part No: Part No: Fasteners Included:
SS-104 (U) SS-106 (U) SS-107 (U) SS-109 (U) None
SS-104 (ZP) SS-106 (ZP) SS-107 (ZP) SS-109 (ZP) Zinc Plated Nuts and Bolts
SS-104 (SS) SS-106 (SS) SS-107 (SS) SS-109 (SS) Stainless Steel Nuts and Bolts
SS-104 can also be used to end mount 6” tall extruded street name signs SS-107 can also be used to end mount 9” tall extruded street name signs Vandal resistant nuts and bolts are available to reduce theft and vandalism
For End-Mounting Signs
Page 21
www.dynabrackets.com Page 21 [email protected]
SS-209 Installation Specifications:
For End-Mounting Signs
Slot Width: 0.330” Overall Length: 9”
Part No: Fasteners Included:
SS-209 (U) None
SS-209 (ZP) Zinc Plated Nuts and Bolts
SS-209 (SS) Stainless Steel Nuts and Bolts
Vandal resistant nuts and bolts are available to reduce theft and vandalism
• Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - 8” Center to Center - 1/2” From Edge To Center • Straps To 4”+ Round, 3-1/4”+ Square, All Lamp Posts
SS-312 Installation Specifications:
For End-Mounting Signs
Slot Width: 0.185” Overall Length: 12”
Part No: Fasteners Included:
SS-312 (U) None
SS-312 (ZP) Zinc Plated Nuts and Bolts
SS-312 (SS) Stainless Steel Nuts and Bolts
Vandal resistant nuts and bolts are available to reduce theft and vandalism
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Edge To Center • Straps To 1-3/4”+ Square, All Lamp Posts
Page 22
www.dynabrackets.com Page 22 [email protected]
Windless® End Mounts Manufactured with the same Windless® design as Dyna Engineering’s Windless® Overhead Sign Mounts, these end mounts share the same characteristics - extremely strong, durable, and completely corrosion resistant. These end mounts are also equipped with specialized oil-impregnated brass Oilite® bushings to self-lubricate the swinging components to provide a low-maintenance solution.
7-SM-F-B 7-SM-F-S
®
7-SM-F-B 7-SM-F-S Installation Specifications:
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - 1-1/2” Center to Center - 1” From Top Edge to Center
Bolt To Post 6” Saddle Size Fixed Length
Strap To Post Fits Up To 3/4” Wide Band 4” Saddle Size Fixed Length
Part No: Part No: Fasteners Included:
7-SM-F-B (U) 7-SM-F-S (U) No Sign Fasteners But Includes Pre-Assembly
7-SM-F-B (SS) 7-OM-F-S (SS) Stainless Steel Sign Fasteners And Includes Pre-Assembly
7-SM-F-B Backing design ideal for post mount to 1-3/4”+ square, all lamp posts, and any flat surfaces Can bolt directly to telespar posts without any extra drilling 7-SM-F-S Backing design ideal for post mount to 2-3/8”+ round, 2-1/2”+ square, and all lamp posts Complete corrosion resistant assembly Pre-assembled as shown for convenience Windless® design to release stress on posts and signs during high windloads Windless® design also prevents signs from bending or causing damage to moving vehicles and objects passing by
For End-Mounting Signs
Page 23
www.dynabrackets.com Page 23 [email protected]
15-CB1450 Installation Specifications:
For End-Mounting Signs
Part No: Fasteners Included:
15-CB1450 (U) None
15-CB1450 (ZP) Zinc Plated Set Screws
15-CB1450 (SSVB) Stainless Steel Vandal Resistant Bolts*
Can bolt directly to telespar posts without any extra drilling *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - sign hole locations shown in specification sheet • Bolts/Straps To 2-3/8”+ Round, 2”+ Square, All Lamp Posts
15-CB1450 (ZPV) Zinc Plated Vandal Resistant Set Screws*
15-CB1450 (SS) Stainless Steel Set Screws
15-CB1450 (SSV) Stainless Steel Vandal Resistant Set Screws*
15-CB1450 (ZPVB) Zinc Plated Vandal Resistant Bolts*
15-CB2400 Installation Specifications:
For End-Mounting Signs
Part No: Fasteners Included:
15-CB2400 (U) None
15-CB2400 (ZP) Zinc Plated Set Screws
15-CB2400 (SSVB) Stainless Steel Vandal Resistant Bolts*
Can bolt directly to telespar posts without any extra drilling *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - sign hole locations shown in specification sheet • Bolts/Straps To 2-3/8”+ Round, 2”+ Square, All Lamp Posts
15-CB2400 (ZPV) Zinc Plated Vandal Resistant Set Screws*
15-CB2400 (SS) Stainless Steel Set Screws
15-CB2400 (SSV) Stainless Steel Vandal Resistant Set Screws*
15-CB2400 (ZPVB) Zinc Plated Vandal Resistant Bolts*
16-CB2050 Installation Specifications:
For Offset Post Sign Mounting • Bracket-to-Post Installation • 2-3/8” Round Sign Bracket Set Screws To Mounting Base • Straps To 4-1/2”+ Round, 4-3/4”+ Square, All Lamp Posts
Part No: Fasteners Included:
15-CB2050 None
AR-238R-278R adapter ring is available to convert from 2-3/8” mounting base to 2-7/8”
Page 24
www.dynabrackets.com Page 24 [email protected]
POST CLIP-SC Installation Specifications:
For Extruded Highway Signs • Sign-to-Post Installation • Clamp Sign Mounting • Clamps To Highway Sign Supports
Part No: Fasteners Included:
POST CLIP-SC (U) None
POST CLIP-SC (SS) Stainless Steel Lock Nuts, T-Bolts, and Washers
Aluminum Alloy 356-T6
SC-180AL6 Installation Specifications:
For Side / Vertical Sign Stacking
Sign Angle 180°
Part No: Fasteners Included:
SC-180AL6 (U) None
SC-180AL6 (ZP) Zinc Plated Nuts and Bolts
SC-180AL6 (SS) Stainless Steel Nuts and Bolts
Conveniently used to stack signs horizontally or vertically parallel
• Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting - 3” Center to Center
SC-180AL2.25 Installation Specifications:
For Side / Vertical Sign Stacking
Sign Angle 180°
Part No: Fasteners Included:
SC-180AL6 (U) None
SC-180AL6 (ZP) Zinc Plated Nuts and Bolts
SC-180AL6 (SS) Stainless Steel Nuts and Bolts
Conveniently used to stack signs horizontally or vertically parallel
• Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting - 1-1/4” Center to Center
Page 25
www.dynabrackets.com Page 25 [email protected]
Examples of Various Sign Mounting Options
14-RF278 Installation Specifications:
For Top-Mounting Signs
Part No: Fasteners Included:
14-RF278 (U) None
14-RF278 (ZP) Zinc Plated Set Screws
14-RF278 (SSV) Stainless Steel Vandal Resistant Set Screws
Twin sign panel mounting system *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
• Bracket-to-Post Installation • For Use With 14-SEPBRKT-F And 14-SEPBRKT-A • Set Screws To 2-7/8” Round Posts
14-RF278 (SS) Stainless Steel Set Screws
14-RF278 (ZPV) Zinc Plated Vandal Resistant Set Screws
14-SEPBRKT-F Installation Specifications:
For Top-Mounting Signs • Sign-to-Bracket Installation • Clamp Sign Mounting • Clamps To 14-RF278
Slot Width 0.180”
Part No: Fasteners Included:
14-SEPBRKT-F None
Twin sign panel mounting system Requires 2pcs 14-SEPBRKT-F to mount 1 sign
14-SEPBRKT-A Installation Specifications:
For Stacking Signs At 90° / 180° • Sign-to-Sign Installation • Clamp Sign Mounting • For Use With 14-RF278 And 14-SEPBRKT-F
Slot Width 0.180”
Part No: Fasteners Included:
14-SEPBRKT-A None
Twin sign panel mounting system Requires 2pcs 14-SEPBRKT-A to stack each additional sign
Page 26
www.dynabrackets.com Page 26 [email protected]
ISOTM Strapping Type 201 stainless steel
Part No: Width Gauge Coil Length
BA204 1/2” 0.030” 100’
BA205 5/8” 0.030” 100’
BA206 3/4” 0.030” 100’
LG181 1/2” 0.020” 100’
LG171 5/8” 0.020” 100’
LG161 3/4” 0.020” 100’
To be used with ISOTM buckles
BA206-BLK 3/4” 0.030” 100’
Color
-
-
-
Black
-
-
-
ISOTM Buckles Type 200/300 stainless steel
Part No: Width
BU254 1/2”
BU255 5/8”
BU256 3/4”
To be used with ISOTM strapping
Band-ItTM Strapping Type 201 stainless steel
Part No: Width Gauge Coil Length
C204 1/2” 0.030” 100’
C205 5/8” 0.030” 100’
C206 3/4” 0.030” 100’
To be used with Band-ItTM buckles
Band-ItTM Buckles Type 200/300 stainless steel
Part No: Width
C254 1/2”
C255 5/8”
C256 3/4”
To be used with Band-ItTM strapping
ISOTM Wing Seals Type 200/300 stainless steel
Part No: Width
WS154 1/2”
WS155 5/8”
WS156 3/4”
To be used with ISOTM strapping
BA206-BLK Now in stock!
Page 27
www.dynabrackets.com Page 27 [email protected]
Bucklestraps ISOTM Strapping - Type 201 stainless steel
Part No: Width Gauge Finished Length
BA204-BU-##* 1/2” 0.030” Any
BA205-BU-##* 5/8” 0.030” Any
BA206-BU-##* 3/4” 0.030” Any
LG181-BU-##* 1/2” 0.020” Any
LG171-BU-##* 5/8” 0.020” Any
LG181-BU-##* 3/4” 0.020” Any
Set-up fee and 300’ total finished minimum length will apply *## denotes the finished length in inches - specified by customer
Bucklestraps Band-ItTM Strapping - Type 201 stainless steel
Part No: Width Gauge Finished Length
C204-BU-##* 1/2” 0.030” Any
C205-BU-##* 5/8” 0.030” Any
C206-BU-##* 3/4” 0.030” Any
Set-up fee and 300’ total finished minimum length will apply *## denotes the finished length in inches - specified by customer
Bucklestraps ISOTM Strapping - Type 201 stainless steel
Part No: Width Gauge Finished Length
BA204-BU-34 1/2” 0.030” 34”
In stock No set-up fee and only standard minimum order amounts will apply
BA205-BU-34 5/8” 0.030” 34”
Pre-fabricated Bucklestraps Our machine shop is capable of manufacturing pre-fabricated strapping hardware using standard stainless steel strapping cut to length with a tapered end on one side and a permanently attached buckle on the other. This allows for quick and easy installation, saving approximately 3 minutes per sign, and reduces the number of tools brought to a job site. We have added a feature to our cutting tools which taper the ends of the strapping in order to protect the installer from any sharp or jagged edges caused by cutting the strapping with basic shears. The tapering also allows for easier entry into the bracket and the buckle when fastening.
Page 28
www.dynabrackets.com Page 28 [email protected]
Part No: Brand Minimum
Width Maximum
Width Maximum
Gauge Tensioning
Force
T-001 Standard 3/16” 3/4” 0.030” 2400 LBS
C-001 Band-ItTM 3/16” 3/4” 0.030” 2400 LBS
Strap Tensioning Tool
Spin Handle Tensioning Tools
Part No: Brand Minimum
Width Maximum
Width Maximum
Gauge
T-101 Standard 3/8” 3/4” 0.030”
Strap Tensioning Tool Recommended For Tensioning On Flat Surfaces
Ratchet Handle Tensioning Tools
Page 29
www.dynabrackets.com Page 29 [email protected]
BC2 Series Breakaways Universal Breakaway System • Anchor-to-Post Installation
• 5/16” Set Screw Mount To Anchor • 5/16” Set Screw Mount To Post Available In All Common Post Sizes
Part No: Post Type 1 Post Type 2
BC2-178R-178R 1-7/8” Round 1-7/8” Round
BC2-178R-238R 1-7/8” Round 2-3/8” Round
BC2-178R-134SQ 1-7/8” Round 1-3/4” Square
BC2-178R-200SQ 1-7/8” Round 2” Square
BC2-178R-214SQ 1-7/8” Round 2-1/4” Square
BC2-238R-238R 2-3/8” Round 2-3/8” Round
BC2-238R-134SQ 2-3/8” Round 1-3/4” Square
BC2-238R-200SQ 2-3/8” Round 2” Square
BC2-238R-214SQ 2-3/8” Round 2-1/4” Square
BC2-134SQ-134SQ 1-3/4” Square 1-3/4” Square
BC2-134SQ-200SQ 1-3/4” Square 2” Square
BC2-134SQ-214SQ 1-3/4” Square 2-1/4” Square
BC2-200SQ-200SQ 2” Square 2” Square
BC2-200SQ-214SQ 2” Square 2-1/4” Square
BC2-214SQ-214SQ 2-1/4” Square 2-1/4” Square
Pre-assembled as shown for convenience Sign post breakaway system protects the post anchor in the ground from damage
Installation Specifications:
BC2 Cups Only Installation Specifications:
Replacements - Cups Only Extends cup reusability when fasteners are replaced with each use
Part No: Post Type
BC2-178R (U) 1-7/8” Round
BC2-238R (U) 2-3/8” Round
BC2-134SQ (U) 1-3/4” Square
BC2-200SQ (U) 2” Square
BC2-214SQ (U) 2-1/4” Square
BC2-HW-KIT hardware kit is available for re-assembling couplers
BC2 Centerpiece Only Installation Specifications:
Replacements - Centerpiece Only Best results when the contact surfaces between the centerpiece and cups are free of debris
Part No: Post Type
BC2-CENTER-7 Works With All Combinations
More cost-effective replacement option than traditional 1-piece designs
BC2 Fasteners Only Installation Specifications:
Replacements - Fasteners Only This convenient fastener kit includes enough hardware to completely re-assemble 1 breakaway coupling
Part No:
BC2-HW-KIT Stainless Steel Nuts, Bolts, Set Screws, Washers & Galv. Cable
Stainless steel and galvanized hardware extends re-usability of the cups
Fasteners Included:
Square to Square Round to Round Round to Square
Round and Square Cups
Centerpiece - Easily Replaceable Break Portion
Fastener Kit - Complete For 1 Breakaway Coupling
A truly universal design that can easily couple any combination of sign posts together so there is no need to search for odd size combinations anymore! This easy-to-use 3-piece design allows you to mix-and-match any sign post types, in essence, you create your own “build-to-fit” coupler for whatever you need. Another benefit of this 3-piece design is that you only have to replace components as necessary. The cups can be reused and replaced as needed and the centerpiece is just a fraction of the replacement cost of traditional 1-piece designs.
Useful Tip:Useful Tip: Keep some preKeep some pre--assembled sets on hand when heading out to repair fallen assembled sets on hand when heading out to repair fallen sign posts. There’s no need to resign posts. There’s no need to re--assemble onassemble on--site.site. Bring all of the used components back to your workshop to salvage, repair Bring all of the used components back to your workshop to salvage, repair and reand re--assemble reusable parts in a more comfortable environment.assemble reusable parts in a more comfortable environment. Some threaded holes may need reSome threaded holes may need re--threading. Enjoy the savings!threading. Enjoy the savings!
Page 30
www.dynabrackets.com Page 30 [email protected]
BC1-238R-238R Installation Specifications:
2-3/8” Breakaway Coupling • Anchor-to-Post Installation • 5/16” Set Screw Mount To Anchor • 5/16” Set Screw Mount To Post
Part No: Post Type 1 Post Type 2
BC1-238R-238R 2-3/8” Round 2-3/8” Round
Sign post breakaway system protects the post anchor in the ground from damage
D-238 Installation Specifications:
2-3/8” Aluminum Dome Rain Cap • Press Fit Installation • Fits On Outside Of Post
Part No: Post Type 1
D-238 2-3/8” Round
Prevent water build up and corrosion inside posts Adds decorative dome-top appearance
P-238-O Installation Specifications:
2-3/8” Plastic Flat-Top Rain Cap • Press Fit Installation • Fits On Outside Of Post
Part No: Post Type 1
P-238-O 2-3/8” Round
Prevent water build up and corrosion inside posts Adds decorative low profile appearance UV stabilizers added into plastic to extend life
P-238-I Installation Specifications:
2-3/8” Plastic Plug Rain Cap • Press Fit Installation • Fits On Inside Of Post
Part No: Post Type 1
P-238-I 2-3/8” Round
Prevent water build up and corrosion inside posts Won’t be seen when viewed from the ground UV stabilizers added into plastic to extend life
Page 31
www.dynabrackets.com Page 31 [email protected]
DR-38AL1 Installation Specifications:
Aluminum Drive Rivet • Sign-to-Post or Post-to-Anchor Installation • Body Diameter: 3/8” • Head Diameter: 1” • Grip Range: 0.233” to 0.330”
Aluminum Body and Pin
Part No: Fasteners Included:
DR-38AL1 (U) None
Jumbo head 1” diameter provides substantially greater surface area clamping support Head installs flush with sign face to increase vandal resistance Easy installation with a typical hammer When using drive rivets to install signs to posts: Drive rivets can be used to clamp just about any type of sign to a post including aluminum, plastic, or wood signs. Use nylon washers to protect the reflective sheeting on the signs Minimum sign thickness combinations with sign post and washer: 0.066” minimum sign thickness when combined with 12GA post and 0.062” thick washer* 0.088” minimum sign thickness when combined with 14GA post and 0.062” thick washer* *An additional nylon washer can be added to mount thinner signs Maximum sign thickness combinations with sign post and washer: 0.163” maximum sign thickness when combined with 12GA post and 0.062” thick washer** 0.185” maximum sign thickness when combined with 14GA post and 0.062” thick washer** **Nylon washer can be excluded to mount thicker signs When using drive rivets to install sign posts to anchors: Can mount either one 12GA or 14GA sign post to one or two layers of 12GA or 14GA anchors Use steel washers to adjust the clamping tension Standard telespar post / anchor thicknesses: 12 GA = 0.105” 14 GA = 0.083”
DR-38ZP1
Zinc Plated Steel Drive Rivet
Steel Body and Pin
Part No:
DR-38ZP1 (U)
DR-38ZP1 (NL) DR-38AL1 (NL) Nylon Washers (standard 0.062” thick)
A-238R Installation Specifications:
2-3/8” Round Adapter • Bracket-to-Post Installation • 2-3/8” Outside Diameter Mounting Base • Bolt Thru Mount To Post • Sign Bracket Can Set Screw Mount To Adapter
Part No: Fasteners Included:
A-238R None
Adapts any square or U-channel post to transform to 2-3/8” OD
AR-238R-278R Installation Specifications:
2-3/8” to 2-7/8” Round Adapter • Bracket-to-Post Installation • 2-3/8” Inside Diameter x 2-7/8” Outside Diameter • Set Screw Mount To Post • Sign Bracket Can Set Screw Mount To Adapter
Part No: Fasteners Included:
AR-238R-278R (U) None
Adapts any 2-3/8” OD round post or mounting base to transform to 2-7/8” OD
AR-238R-278R (ST) Oilized Carbon Steel Set Screws
Page 32
www.dynabrackets.com Page 32 [email protected]
CRB CMB Installation Specifications:
For Erecting Signs on Concrete Barriers • Concrete Barrier-to-Post Installation • CRB for 210mm and CMB for 240mm Concrete Barriers • 2-3/8” Inside Diameter
Part No: Part No: Fasteners Included:
CRB (GA) CMB (GA) Galvanized Threaded Rod, Washers, Nuts and SS Hex Bolt
SP-238R63 sign post, D-238 rain cap, and HS-1 sign brackets are available for a complete assembly.
CRB CMB SP-238R63 Installation Specifications:
Sign Post for Concrete Barrier • Barrier-to-Bracket Installation • 2-3/8” Outside Diameter
Part No: Length:
SP-238R63 63” (5ft 3in)
Designed for use with CRB and CMB
SPB-278GA10 Installation Specifications:
Surface Mount Sign Post Base • Ground-to-Post Installation • 2-3/8” Inside Diameter • 8”x8” Base With 6” Hole Centers 10” Height
Part No: Fasteners Included:
SPB-278GA10 (SS) Stainless Steel Set Screw
Stainless steel hex bolts are available upon request
SPB-278GA12 Installation Specifications:
Surface Mount Sign Post Base • Ground-to-Post Installation • 2-3/8” Inside Diameter • 6”x6” Base With 3.5” Hole Centers 12” Height
Part No: Fasteners Included:
SPB-278GA12 (SS) Stainless Steel Set Screw
Stainless steel hex bolts are available upon request
63” (5’3”) length designed for use with CRB and CMB
SPA-278GA12 SPA-278GA18 Installation Specifications:
Concrete-Embedded Sign Post Anchor • Ground-to-Post Installation • 2-3/8” Inside Diameter 12” Length 18” Length
Part No: Part No: Fasteners Included:
SPA-278GA12 (SS) SPA-278GA18 (SS) Stainless Steel Set Screw
Stainless steel hex bolts are available upon request
Page 33
www.dynabrackets.com Page 33 [email protected]
S-38AL1.125 Installation Specifications:
Solid Aluminum Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.125” length
Part No: Fasteners Included:
S-38AL1.125 (U) None
S-38AL1.125 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) 5/16” fasteners available
S-38AL1.125 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
S-38GA1.125 Installation Specifications:
Galvanized Steel Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.125” length
Part No: Fasteners Included:
S-38GA1.125 (U) None
S-38GA1.125 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) 5/16” fasteners available
S-38GA1.125 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
S-38NL1.275 Installation Specifications:
Nylon Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.275” length
Part No: Fasteners Included:
S-38NL1.275 (U) None
S-38NL1.275 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
Nylon with UV stabilizers Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) Spacer will compress as the bolts are tightened 5/16” fasteners available
S-38NL1.275 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
S-38AL1.350 Installation Specifications:
Solid Aluminum Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.350” length
Part No: Fasteners Included:
S-38AL1.350 (U) None
S-38AL1.350 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) 5/16” fasteners available
S-38AL1.350 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)