signature hinged door (125mm)

Installation Details

SignatureHinged Door(125mm)

THICKNESS TO SUIT(BY BUILDER - 300mm LENGTH)

CAVITY FIXING PACKER

(BY BUILDER)

STEEL LINTEL

TIMBER LINTEL

SARKING

SEALANT

HEAD FLASHING

(DO NOT PACK FIXING)

REVEAL TO SUIT

10mm MIN. CLEARANCE

(BY BUILDER - SEE NOTE)HEAD REVEAL FIXING

(BY BUILDER)

JAMB STUD

JAMB FLASHING

(BY BUILDER - AT FIXING POINTS)JAMB PACKER TO SUIT

(BY BUILDER - SEE NOTE)AT HINGE POINTS & CENTRES TO SUIT

NOTE:

JAMB REVEAL FIXING

300mm CENTRES MAXIMUM. FIXING SIZE TO BE EQUIVALENT TO A450mm CENTRE MAXIMUM, FOR SITUATIONS IN EXCESS OF THIS THE FIXINGS ARE TO BE ATFOR SITE CLASSIFICATIONS OF UP TO AND INCLUDING 'N6' OR SIMILAR, FIXINGS ARE TO BE AT

2.2mm STEEL NAIL MIMIMUM.

(200mm LENGTHS - AT HINGE POINTS)EXTENDER FIN 100BA543 (3964)

(BY BUILDER - 1 PER HINGE)

(BY BUILDER - 2 PER FIN EXTENDER)

ARCHITRAVE

INTERIOR LINING

10G x 65mm SCREWFIN EXTENDER FIXING

(2 PER FIN EXTENDER)SCREW SQ 10G x 1.18 WAFER SD SS #283761

ADDITIONAL HINGE FIXINGREMOVE EXISTING & RELACEWITH 10G x 100mm SCREW

HINGE TO SUIT

SIG-HD-02-01 B

Phone (07) 3131 3777 Fax (07) 3131 3838136 Zillmere Road, Boondall, Q 4034, Australia

ABN 78 010 409 819

SIG 125 HD

CDJH 1 : 3

COPYRIGHT 2017

PRODUCT NO:

SCALE:

DRAWING NO:

DRAWN:

DATE:

ISSUE:

01/02/17

BRICK VENEER CONSTRUCTION - OPEN IN - HEAD & JAMB DETAIL

Signature Hinged Door (125mm )Installation Details

02-01

(BY BUILDER - 1 PER HINGE)

NOTE:

300mm CENTRES MAXIMUM. FIXING SIZE TO BE EQUIVALENT TO A450mm CENTRE MAXIMUM, FOR SITUATIONS IN EXCESS OF THIS THE FIXINGS ARE TO BE AT

2.2mm STEEL NAIL MIMIMUM.

(BY BUILDER)JAMB FLASHING

(BY BUILDER)

BRICKWORK

REVEAL TO SUIT

SILL FLASHING

(AS PER B.C.A.)

FOOTING

DRAIN SLOTS

(NON-SHRINKING)

INTERNAL FLOOR FINISH

SEALANT

GROUT


FOR SITE CLASSIFICATIONS OF UP TO AND INCLUDING 'N6' OR SIMILAR, FIXINGS ARE TO BE AT

(BY BUILDER - SEE NOTE)AT HINGE POINTS & CENTRES TO SUITJAMB REVEAL FIXING

(BY BUILDER - 300mm LENGTH)THICKNESS TO SUITCAVITY FIXING PACKER

(2 PER FIN EXTENDER)SCREW SQ 10G x 1.18 WAFER SD SS #283761

(200mm LENGTHS - AT HINGE POINTS)EXTENDER FIN 100BA543 (3964)

(BY BUILDER - 2 PER FIN EXTENDER)10G x 65mm SCREWFIN EXTENDER FIXING

ADDITIONAL HINGE FIXINGREMOVE EXISTING & RELACEWITH 10G x 100mm SCREW

HINGE TO SUIT

B


ABN 78 010 409 819 COPYRIGHT 20171 : 3

SIG 125 HD

DRAWN:

DRAWING NO:

PRODUCT NO:

SCALE:C

ISSUE:

DATE:

DJH

SIG-HD-02-02

01/02/17

BRICK VENEER CONSTRUCTION - OPEN IN - SILL & JAMB DETAIL


02-02

450mm CENTRE MAXIMUM, FOR SITUATIONS IN EXCESS OF THIS THE FIXINGS ARE TO BE AT

SARKING

(200mm LENGTHS - AT HINGE POINTS)

300mm CENTRES MAXIMUM. FIXING SIZE TO BE EQUIVALENT TO A 2.2mm STEEL NAIL MIMIMUM.

EXTERIOR CLADDING

TIMBER LINTEL

EXTERIOR TRIM

HEAD FLASHING(BY BUILDER)

BA543 (3964)EXTENDER FIN 100

(DO NOT PACK FIXING)

REVEAL TO SUIT

INTERIOR LINING

ARCHITRAVE

JAMB STUD

10mm MIN. CLEARANCE



(BY BUILDER - SEE NOTE)

HINGE TO SUIT

HEAD REVEAL FIXING

JAMB REVEAL FIXING

NOTE:

(BY BUILDER - 1 PER HINGE)WITH 10G x 100mm SCREW



REMOVE EXISTING & RELACE

(BY BUILDER - 2 PER FIN EXTENDER)10G x 65mm SCREWFIN EXTENDER FIXING

ADDITIONAL HINGE FIXING

83761SCREW SQ 10G x 1.18 WAFER SD SS #2(2 PER FIN EXTENDER)

B


ABN 78 010 409 819 COPYRIGHT 20171 : 3

ESS 100 HD

DRAWN:

DRAWING NO:

PRODUCT NO:

SCALE:C

ISSUE:

DATE:

DJH

ESS-HD-02-03

01/02/17

CLADDING CONSTRUCTION - OPEN IN - HEAD & JAMB DETAIL


02-03

ISSUE:SIG-HD-02-04 B


C COPYRIGHT 2016

DATE:SIG 125 HD

ABN 78 010 409 819

PRODUCT NO:

SCALE: 1 : 3DJHDRAWN:

DRAWING NO:

20/09/16

CLADDING CONSTRUCTION - OPEN IN - SILL & JAMB DETAIL

BA543 (3964)EXTENDER FIN 100

2.2mm STEEL NAIL MIMIMUM.450mm CENTRE MAXIMUM, FOR SITUATIONS IN EXCESS OF THIS THE FIXINGS ARE TO BE AT

(200mm LENGTHS - AT HINGE POINTS)


(AT FIXING POINTS)

HINGE TO SUIT

(BY BUILDER - 2 PER FIN EXTENDER)

(BY BUILDER)

FOOTING

(BY BUILDER)

300mm CENTRES MAXIMUM. FIXING SIZE TO BE EQUIVALENT TO A

SEALANT

(BY BUILDER)

SILL FLASHING

GROUT

EXTERIOR TRIM

JAMB REVEAL FIXING


10G x 65mm SCREWFIN EXTENDER FIXING

JAMB PACKER

SILL SUPPORT

FOR SITE CLASSIFICATIONS OF UP TO AND INCLUDING 'N6' OR SIMILAR, FIXINGS ARE TO BE ATNOTE:

(BY BUILDER - 1 PER HINGE)WITH 10G x 100mm SCREWREMOVE EXISTING & RELACEADDITIONAL HINGE FIXING

83761SCREW SQ 10G x 1.18 WAFER SD SS #2(2 PER FIN EXTENDER)


02-04

B


ABN 78 010 409 819 COPYRIGHT 20171 : 3

SIG 125 HD

DRAWN:

DRAWING NO:

PRODUCT NO:

SCALE:C

ISSUE:

DATE:

DJH

SIG-HD-02-05

01/02/17

CAVITY BRICK CONSTRUCTION - OPEN IN - HEAD & JAMB DETAIL


(BY BUILDER)HEAD FLASHING

INTERNAL LINING ADHESIVE

STEEL LINTEL


INTERNAL LINING

(TO PINCH FIN)

BRICKWORK

NOTE:FOR SITE CLASSIFICATIONS OF UP TO AND INCLUDING 'N6' OR SIMILAR, FIXINGS ARE TO BE AT450mm CENTRE MAXIMUM, FOR SITUATIONS IN EXCESS OF THIS THE FIXINGS ARE TO BE AT

HINGE TO SUIT

86716TIE BRICK FLAT CAVITY SIG LASEROR85856TIE FLAT BRICK 100/166(AT COURSE NEAREST HINGE &EVERY FOURTH COURSE MAX.)

86716 (TRIMMED)TIE BRICK FLAT CAVITY SIG LASER(AT COURSE NEAREST HINGE &EVERY FOURTH COURSE MAX.)


02-05

1 : 3

DRAWING NO: ISSUE:SIG-HD-02-06 B

DJH Phone (07) 3131 3777 Fax (07) 3131 3838136 Zillmere Road, Boondall, Q 4034, Australia

ABN 78 010 409 819 COPYRIGHT 2017

PRODUCT NO:

SCALE:C

DRAWN:

DATE:SIG 125 HD 01/02/17

CAVITY BRICK CONSTRUCTION - OPEN IN - SILL & JAMB DETAIL

FOOTING


SILL FLASHING

(NON-SHRINKING)

(BY BUILDER)

BRICKWORK

(AS PER B.C.A.)

(BY BUILDER)


ARCHITRAVE

SEALANT

DRAIN SLOTS

INTERNAL LINING

JAMB FLASHING

2.2mm STEEL NAIL MIMIMUM.300mm CENTRES MAXIMUM. FIXING SIZE TO BE EQUIVALENT TO A


NOTE:FOR SITE CLASSIFICATIONS OF UP TO AND INCLUDING 'N6' OR SIMILAR, FIXINGS ARE TO BE AT

GROUT

HINGE TO SUIT

86716TIE BRICK FLAT CAVITY SIG LASEROR85856TIE FLAT BRICK 100/166(AT COURSE NEAREST HINGE &EVERY FOURTH COURSE MAX.)

86716 (TRIMMED)TIE BRICK FLAT CAVITY SIG LASER(AT COURSE NEAREST HINGE &EVERY FOURTH COURSE MAX.)


02-06

B


ABN 78 010 409 819 COPYRIGHT 20171 : 3

SIG 125 HD

DRAWN:

DRAWING NO:

PRODUCT NO:

SCALE:C

ISSUE:

DATE:

DJH

SIG-HD-02-07

01/02/17

BLOCKWORK CONSTRUCTION - OPEN IN - HEAD & JAMB DETAIL

(SEAL TO OPENING & FRAME)


(SEE NOTE)

REINFORCING BAR

BLOCKWORK

(INISDE ANGLE ONLY - SEE NOTE)

AND FREE FROM ANY CONTAMINANTS BEFORE SEALING.

HEAD ANGLE FIXINGS ATREQUIRED CENTRES

HINGE TO SUIT

SEALANT

ANGLE 40 x 25 x 2.7mmBX336 (2304)


450mm CENTRE MAXIMUM, FOR SITUATIONS IN EXCESS OF THIS THE FIXINGS ARE TO BE ATFOR SITE CLASSIFICATIONS OF UP TO AND INCLUDING 'N6' OR SIMILAR, FIXINGS ARE TO BE AT

ANCHOR FIXING

INTERNAL LINING

ANGLE 25 x 20 x 1.5(SEAL TO OPENING & FRAME)

BX123 (2369)

(SEE NOTE)

NOTE:SURFACE OF BLOCKS TO WINDOW OPENING MUST BE TANKED WITH A SUITABLE SEALER TOPREVENT INGRESS OF MOISTURE. ENSURE SURFACES TO BE SEALED ARE SOUND, CLEAN, DRY

JAMB ANGLE FIXINGS ABOVE& BELOW HINGE LOCATIONSAND AT REQUIRED CENTRES(SEE NOTE)


02-07

BX336 (2304)

(SEE NOTE)


BX123 (2369)ANGLE 25 x 20 x 1.5(SEAL TO OPENING & FRAME)



INTERNAL LINING

ANGLE 40 x 25 x 2.7mm

(INISDE ANGLE ONLY - SEE NOTE)



(SEE NOTE)

REINFORCING BAR

BLOCKWORK

FOOTING


(NON-SHRINKING)


ANCHOR FIXING

GROUT

SEALANT

(AS PER B.C.A. SEE BELOW)TANKING ON ALL OPENING SURFACES

NOTE:SURFACE OF BLOCKS TO WINDOW OPENING MUST BE TANKED WITH A SUITABLE SEALER TOPREVENT INGRESS OF MOISTURE. ENSURE SURFACES TO BE SEALED ARE SOUND, CLEAN, DRY

JAMB ANGLE FIXINGS ABOVE& BELOW HINGE LOCATIONSAND AT REQUIRED CENTRES

HINGE TO SUIT



C COPYRIGHT 2017

DATE:SIG 125 HD

ABN 78 010 409 819

PRODUCT NO:


DRAWING NO:

01/02/17

BLOCKWORK CONSTRUCTION - OPEN IN - SILL & JAMB DETAIL


02-08

1 : 3

DRAWING NO: ISSUE:SIG-HD-02-09 B


ABN 78 010 409 819 COPYRIGHT 2017

PRODUCT NO:

SCALE:C

DRAWN:

DATE:SIG 125 HD 01/02/17

CONCRETE CONSTRUCTION - OPEN IN - HEAD & JAMB DETAIL

ANGLE 25 x 20 x 1.5

BX336 (2304)

INTERNAL LINING


PREVENT INGRESS OF MOISTURE. ENSURE SURFACES TO BE SEALED ARE SOUND, CLEAN, DRY


(SEE NOTE)


BX123 (2369)

HEAD ANGLE FIXINGS ATREQUIRED CENTRES

SURFACE OF CONCRETE TO WINDOW OPENING MUST BE TANKED WITH A SUITABLE SEALER TO

CONCRETE PANEL

FIXING TYPES & CENTRES TO BE PROJECT SPECIFIC, REFER TO SPECIFICATION AND/OR ENGINEEER.



HINGE TO SUIT

NOTE:

(SEE NOTE)



02-09

PREVENT INGRESS OF MOISTURE. ENSURE SURFACES TO BE SEALED ARE SOUND, CLEAN, DRY

NOTE:SURFACE OF CONCRETE TO WINDOW OPENING MUST BE TANKED WITH A SUITABLE SEALER TO


PACKER

(INSIDE ANGLE ONLY - SEE NOTE)

HINGE TO SUIT

BX123 (2369)

FIXING TO SUIT

FIXING TYPES & CENTRES TO BE PROJECT SPECIFIC, REFER TO SPECIFICATION AND/OR ENGINEEER.


BACKING ROD


SUBSILL '15' 100

INTERNAL LINING

BX336 (2304)


ANCHOR FIXING

ANGLE 25 x 20 x 1.5(SEAL TO OPENING & FRAME)

SILL SEALED TO SUBSILL

SEAL SUBFRAME

URETHANE SEALANT

CONCRETE PANEL

83353

(SEE NOTE)

BE015 (3353)

(SEAL OVER FIXING HEAD - SEE NOTE)




C COPYRIGHT 2017

DATE:SIG 125 HD

ABN 78 010 409 819

PRODUCT NO:


DRAWING NO:

01/02/17

CONCRETE CONSTRUCTION - OPEN IN - SILL & JAMB DETAIL


02-10

(FIT INTO SUBSILL BEFORE FIXING)

TANKING APPLIED TO OPENING SURFACE

SUBSILL FIXING

PACKING AT FIXING POINTS

DAM ANGLE TO SUIT

(TYPE & QUANTITY PROJECT SPECIFIC)

1. INSTALL SUBSILL INTO OPENING WITH DAM ANGLE FITTED. PACK SUBSILL LEVELTHEN FIX TO STRUCTURE. SEAL SUBSILL ENDS TO STRUCTURE.

(BY BUILDER)

SUBSILL TO SUIT(SEAL ENDS TO OPENING)

1 : 4

DRAWING NO: ISSUE:SIG-HD-02-11 A


ABN 78 010 409 819 COPYRIGHT 2012

PRODUCT NO:

SCALE:C

DRAWN:

DATE:SIG 125 HD 20/11/12

SUBSILL DAM ANGLE INSTALLATION

(SEAL TO OPENING & SUBSILL)

SEAL ALL JOINTS BETWEEN ANGLE AND SUBSILL. SEAL OVER FIXINGS AND UNDER SUB SILL TO STRUCTURE.

BACKING ROD

SEAL OVER FIXINGS

DAM ANGLE TO SUIT

SEAL

2.APPLY SEALANT TO VERTICAL FACE OF DAM ANGLE AND ALSO TO THE FLOOR OF THE SUBSILL.POSITION DAM ANGLE AGAINST STRUCTURE. SEAL ALL JOINTS BETWEEN ANGLE AND SUBSILL.

TANKING APPLIED TO OPENING SURFACE(BY BUILDER)


02-11

BX336 (2304)ANGLE 40 x 25 x 2.7mm(FIXING ANGLE - SEAL TO OPENING & WINDOW)

Q2481 (2111)ANGLE 25 x 20 x 1.4(TRIM ANGLE - SEAL TO OPENING & WINDOW)

BE015 (3353)SUBSILL '15' 100

83353SEAL SUBFRAME

ANGLE DAM 100(SEAL TO OPENING & SUBSILL)

83611

SILICONE SEAL ALL EXPOSED GAPSBETWEEN SUBSILL, DAM ANGLE & ANGLES

SIG-HD-02-12 A


ABN 78 010 409 819

SIG 125 HD

CDJH 1 : 1.5

COPYRIGHT 2012

PRODUCT NO:

SCALE:

DRAWING NO:

DRAWN:

DATE:

ISSUE:

20/11/12

SUBSILL DAM ANGLE INSTALLATION WITHE FIXING & TRIM ANGLES


02-12

signature hinged door (125mm)

Documents