Fact Sheet S i l k x

wallcover ings for the ultimate in refinementwww.arte-international.com

S i l k x # 6 7 0 1 5

TOTAL WEIGHT 15 oz PLY 464 gr/lm

10 oz PSY 339 gr/m2

ROLL WIDTH 52/54 in. 132/137 cm

GAUGE (average): 0.015 in. 0,381 mm

FABRIC: Non-woven

REPEAT: horizontal N.A. N.A.

vertical N.A. N.A.

NOMINAL PATTERN WIDTH: 51 in. 130 cm

HANGING INSTRUCTIONS: Non-reverse - Random match

TENSILE (minimum): 30 x 30 lbf 133 x 133 N

TEAR (minimum): 12 x 12

ASTM F-793: Category IV type I

WA Spec: W 101 - 2011 type II

FIRE TESTING:

US CLASSIFICATION NFPA 101® Life Safety Code®

NFPA 255 (UL 723, CAN S102M) Tunnel Test1

- Class A Rating

NFPA 286 Corner Burn Test2

- Meets requirements for Flame Spread, Smoke

Developed and Flashover

1. When tested on GRC board with A-848-B adhesive 2. When tested on 5/8” type X gypsum board with A-848-B adhesive

U.S. UNITS METRIC UNITS

EU CLASSIFICATION

in accordance with EN 13501-1:2007 and prEN 15102:2007 + A:2011

Fire Behavior B Smoke Production s1 Flame Droplets d0

Product complying with the Marine Equipment Directive (MED)

NOTES: - “Roll width” represents the width of the wallcovering that will be received by the customer. - “Gauge” is the product thickness measured after the first pattern colourway is produced.- “Nominal pattern width” is the expected width yield from one drop on the wall.- “Tensile” and “Tear” results are the minimums required by CCC-W-408A federal specifications.

SILKX # 67015

This decorative metallic wallcovering should only be cleaned with mild ingredients such as soap, detergent and water. Stronger, more alkaline household cleaners and/or excessive scrubbing, have the potential to damage the surface of the wallcovering.

Th

e p

ort

raye

d c

olo

urs

may

dif

fer

fro

m r

eali

ty.

Pa t ter n S i l k x

A R T E P R I S M AA R T E P R I S M A

S i l k x # 6 7 0 1 5

Special ly for the contract

market, Ar te combines

des ign, co lour and qual i ty

in a magis teral way.

The luxur ious but

extremely durable v inyl

wal l cover ing meets the

most s t r ingent technical requirements

for this highly demanding market, such

as f i re res i s tance, shock res i s tance and

washabi l i ty.

This i s why Ar te’s contract wal l cover ing

i s so widely used in hote l s, o f f i ces and

e lder ly and nurs ing homes.

Sil

kx

# 6

70

15

Silkx

# 67003

# 67000 # 67001 # 67002 # 67003 # 67004 # 67005 # 67006

# 67008# 67007 # 67009

# 67014

# 67010

# 67015 # 67016

# 67011 # 67012 # 67013

Special ly for the contract market,

Ar te combines des ign, co lour and

qual i ty in a magis teral way.

The luxur ious but extremely

durable v inyl wal l cover ing meets

the most s t r ingent technical

requirements for this highly

demanding market, such as f i re res i s tance,

shock res i s tance and washabi l i ty.

This i s why Ar te’s contract wal l cover ing i s so

widely used in hote l s, o f f i ces and e lder ly and

nurs ing homes.

A R T E P R I S M A

Roll widthNominal pattern width

TOTAL WEIGHT 15 oz PLY 464 gr/lm

10 oz PSY 339 gr/m2

ROLL WIDTH 52/54 in. 132/137 cm

GAUGE (average): 0.015 in. 0,381 mm

FABRIC: Non-woven

REPEAT: horizontal N.A. N.A.

vertical N.A. N.A.

NOMINAL PATTERN WIDTH: 51 in. 130 cm

HANGING INSTRUCTIONS: Non-reverse - Random match

TENSILE (minimum): 30 x 30 lbf 133 x 133 N

TEAR (minimum): 12 x 12

ASTM F-793: Category IV type I

WA Spec: W 101 - 2011 type II

Silkx

67000 - 67016

Data Sheet

References

Notes: - “Roll width” represents the width of the wallcovering that will be received by the customer. - “Gauge” is the product thickness measured after the first pattern colourway is produced. - “Nominal pattern width” is the expected width yield from one drop on the wall. - “Tensile” and “Tear” results are the minimums required by CCC-W-408A federal specifications.

U.S. UNITS METRIC UNITS

FIRE TESTING:

US CLASSIFICATION NFPA 101® Life Safety Code®

NFPA 255 (UL 723, CAN S102M) Tunnel Test1

- Class A Rating

NFPA 286 Corner Burn Test2

- Meets requirements for Flame Spread, Smoke

Developed and Flashover

1. When tested on GRC board with A-848-B adhesive 2. When tested on 5/8” type X gypsum board with A-848-B adhesive

Double Cut Double Cut

EU CLASSIFICATION

in accordance with EN 13501-1:2007 and prEN 15102:2007 + A:2011

Fire Behavior B Smoke Production s1 Flame Droplets d0

Silkx 67000 - 67016

Pattern

References

GENERAL SPECIFICATIONS IMPORTANT: read the hanging instructions before starting the installation.

wallcover ings for the ultimate in refinementwww.arte-international.com

Product complying

with the Marine

Equipment Directive

(MED)

SILKX # 67015

This decorative metallic wallcovering should only be cleaned with mild ingredients such as soap, detergent and water. Stronger, more alkaline household cleaners and/or excessive scrubbing, have the potential to damage the surface of the wallcovering.