silver brazed stainless steel cable presented by: erik clark tim flynn tony foster peter jones brian...
TRANSCRIPT
Silver Brazed StainlessSilver Brazed StainlessSteel CableSteel Cable
Presented by:Presented by:Erik ClarkErik ClarkTim FlynnTim Flynn
Tony FosterTony FosterPeter JonesPeter JonesBrian MartelBrian MartelRied SnyderRied Snyder
CableCable
In this case it is a 1 x 19
cable that is made out of
little wires put together
To be exact it is 1 strand
of one set of 19 little wires
Cable ContinuedCable Continued
In this application it is important to use cable instead of a solid piece because cables are flexible and have give
Cable is cost effective
Cable is easy to form for this application
Stainless ContinuedStainless ContinuedWhat is Stainless Steel?Steel, Stainless High Alloy Steel (usually
containing Cr, or Cr + Ni) designed for resistance to corrosion and/or oxidation
Chromium content in stainless varies from 13% - 27%
Many, but not all stainless alloys contain 8% - 10%
Nickel Here are some of the other metals used in stainless
alloys;
Mn, Si, N, P, S, and or course, C
Stainless ContinuedStainless Continued
Example of properties
Steel (18 CR - 8 Ni Stainless)
Modulus of elasticity E = 205,000MPa or 30x106psi
Stainless ContinuedStainless Continued
Why would we want to use Stainless Steel?
Stainless Steel is needed to help avoid the problems created by corrosion
Stainless ContinuedStainless Continued Corrosion Control
The goal of using stainless steel is to control corrosion
There are different ways to do this─ Protective coatings or─ Avoidance of galvanic couples
Stainless ContinuedStainless Continued
Protective coatings
This method works well for many applications─ Cars, Houses, and other painted things
─ Galvanized Steel
Problems─ Protective coatings can wear off leaving surface at risk─ Coated materials must be treated with care
Stainless ContinuedStainless Continued
One way to avoid galvanic couples is by limiting designs to a single type of metal.─ Brass bolt – steel washer pitfall
This does not always solve the problem though─ A cathode and anode may develop in a single
material
Stainless ContinuedStainless Continued
Alloying steel with certain other materials makes it resistant to the cathode anode relationship that creates corrosion
Stainless steel keeps the strength of regular steel without having the corrosion problem
Joining Stainless Steel Joining Stainless Steel ComponentsComponents
• Many Different Methods:– Welding– Brazing– Soldering– Adhesive Bonding– Mechanical Fastening
Brazing OutlineBrazing Outline
• Why Brazing?
• Applications Involving Brazing
• Brazing Processes
• Filler Materials
The Method of BrazingThe Method of Brazing
• Brazing employs filler metals having a liquidus above 450°C (840°F) and below the solidus of the metal.
• In comparison:
– Solders employ a filler metal which DOES melt below 450°C (840°F).
– Welding applications end up melting a substantial amount of the base metal.
– Adhesive bonding is becoming very competitive with other joining methods
Brazing ApplicationsBrazing Applications
• Brazing is often used to join stainless steels to dissimilar metals, such as carbon steels, low-alloy steels, and copper alloys.
• Brazing can obtain strong, corrosion-resistant, leak-tight joints in small or thin walled components with minimal buckling and warpage.
• Brazing can produce joints in delicate assemblies and in very thin-gage metals.
Brazeability of Stainless SteelBrazeability of Stainless Steel
• No more difficult than carbon and low-alloy steels.
• However, chromium oxide films which form during the brazing process must be adequately removed.
– Their refractory and strongly adherent nature will prevent the molten metal from wetting the base metal.
Removing Chromium OxidesRemoving Chromium Oxides
• Many different techniques exist for removing chromium oxide:
– Chemical cleaning @ room temperature– Heating to the brazing temperature in a hydrogen
atmosphere– Coating the area with a chemically active flux which
dissolves the oxide– Heating in a vacuum– Etc.
Brazing ProcessesBrazing Processes
• Many different methods for brazing exist as well, including:
– Furnace– Torch– Induction– Resistance– Salt-bathing
Furnace BrazingFurnace Brazing
• Popular because of its comparatively low equipment cost
• Used extensively where the parts to be brazed can be assembled with the brazing material pre placed near or on the joint.
• Heating is usually produced by electrical resistance.
Torch BrazingTorch Brazing
• Commonly used for repairs, one-of-a-kind brazing jobs, and short production runs.
• The technique is relatively simple and is similar to other torch welding applications.
• Slightly reducing flames are commonly used to prevent oxidation.
• Rather easily automated.
Brazing Filler MaterialsBrazing Filler Materials
• Silver (Ag)• Nickel (Ni)• Copper (Cu)• Gold (Au)
• Which one used is based on mechanical properties, corrosion resistance, service temperature, compatibility with the base material, and cost.
Silver BrazingSilver Brazing
• BAg – 3 is the most commonly used filler
• Commonly applied with torch brazing, as opposed to furnace brazing.
• Unable to be used for high-temperature applications -- below 370°C (700°F)
• Many factors will vary heat temperature ranges used and time allowances.
Other Brazing FillersOther Brazing Fillers
• Nickel is the second most common and allows for high corrosion resistance and high-temperature strength.
• Copper has poor resistive properties and special protective atmospheres must be used during brazing.
• Gold is high cost but can lead to some of the most corrosive resistant joinings.
Why Silver Brazing Then?Why Silver Brazing Then?
• Brazing is more applicable than welding since a minimum of the base material of the part will be lost.
• Silver is cheaper and most widely used than other fillers, and special corrosion resistive properties are not needed.
• Torch welding is easily applied and prevents the need for an automated furnace system.