simultaneous 5-axis vertical machining · pdf filesimultaneous 5-axis vertical machining...
TRANSCRIPT
Simultaneous 5-axis Vertical Machining Center
02
Spindle Speed
Built-in motor driven spindle
Spindle Motor Power(Short/ Cont.)
22 / 18.5 kW
Max. Spindle Speed
12000 r/min
20000 r/min 20000 r/min
The dual contact system offers simultaneous contact between the machine spindle face and toolholder flange face.
Built-in motor for the spindle and high grade balancing technology have virtually eliminated any vibration which deteriorates surface quality. Also the main spindle is optimally designed with 4 row precision ceramic bearing whose features, low centrifugal force and minimum heat generation, are great merits at high speed condition. The high productivity is realized by reduction of the acceleration time to the maximum speed of main spindle thanks to the minimized rotational inertia while maintaining its rigidity.
Spindle Motor Power(Short/ Cont.)
32 / 24 kW
Max. Spindle Speed
12000 r/min
Taper contact
Flange contact
FANUC 31i-A5 HEIDENHAIN iTNC530 Dual contact system(Big plus)
Machining Capacity
High performance machiningThe VC630/5AX is equipped with a high-rigid, high-speed built-in spindle. (Output : 22 kW, maximum torque 204 N·m, spindle taper No.40) Designed for a wide range of applications, from heavy cutting including difficult machining materials like titanium & inconel to high speed cutting of aluminum and other nonferrous materials. The spindle taper is a dual contact system type which is provided as a standard feature.
865 1200 2800 3500 12000 2550 4450 10000 120000
15 (133)
50 (443)60 (531)
119 (1053)
147 (1301)
204 (1806)S3 25%
S3 25%S2 15min
S1 Cont.
S1 Cont.
S2 15min
S6-40-80A
S6-40-80A
S1-65A
S1-65A
22 (29.5)
119 (1053)
32 (42.9)
24 (32.2)
20 (26.8)90 (797)
69 (610)
52 (460)
16 (142)
0
18.5 (24.8)
15 (20.1)
Power : kW (Hp)Torque : N.m (ft.lb)
Rotational Speed (r/min)
Power : kW (Hp)Torque : N.m (ft.lb)
Rotational Speed (r/min)
865 1200 2800 3500 12000 2550 4450 10000 120000
15 (133)
50 (443)60 (531)
119 (1053)
147 (1301)
204 (1806)S3 25%
S3 25%S2 15min
S1 Cont.
S1 Cont.
S2 15min
S6-40-80A
S6-40-80A
S1-65A
S1-65A
22 (29.5)
119 (1053)
32 (42.9)
24 (32.2)
20 (26.8)90 (797)
69 (610)
52 (460)
16 (142)
0
18.5 (24.8)
15 (20.1)
Power : kW (Hp)Torque : N.m (ft.lb)
Rotational Speed (r/min)
Power : kW (Hp)Torque : N.m (ft.lb)
Rotational Speed (r/min)
• ø80mm (3.15 in.) Face mill (6Z)
SM45CMachining removal rate
739.2 cm3/min (45.1 in3/min)
Max. Chip Removal
Feedrate 3300 mm/min (129.9 ipm)
AL6061Machining removal rate
2688 cm3/min (164 in3/min)
Feedrate 7000 mm/min (275.0 ipm)
Cutting depth
2.5 mm (0.1 inch)
Cutting depth
2.5 mm (0.1 inch)
Cutting width
64 mm (2.52 inch)
Cutting width
64 mm (2.52 inch)
SM45CMax. Tool
M42 x P4.5
Max./ Min. Tapping
Feedrate 675 mm/min (26.6 ipm)
AL6061Min. Tool
M3 x P0.5
Feedrate 1800 mm/min (70.9 ipm)
opt. opt.
03
The VC630/5AX provides high-precision machining over extended periods of operation,thanks to advanced machine design featuring extremely rigid construction and an extremely responsive drive system.
Accuracy
Heat displacement Control : Doosan Heat Control Device Using advanced algorithms, real time compensation is applied to the machine Z axis to counter the effects of heat displacement caused by heatedup spindle.
Without smoothing With smoothing
• Heat displacement of VC630/5AX after compensation Z axis displacement max.10 µm
DBB(Double Ball Bar) Accuracy ExampleHigher roundness accuracy is realized by the advanced design of machine structure and Doosan control system.
X-Y Plane
Set Diameter of DBB : 200 mm (7.9 inch)
Feedrate : 1000 mm/min (39.4 ipm)CW 4.8 µm CCW 3.6 µm
+X
+Y
+X
+Y
+X
+Y
+X
+Y
Max. Size ø 730 x 500 mm (ø 28.7 x 19.7 inch)
Max. Weight 500 kg (130.1 lb)
Stroke Specification Max. Workpiece Size / Weight
Work Envelope
The VC630/5AX is designed for the wide machining area for convenient fixture and machine set up.
X / Y / Z axisX axis mm (inch) 650 (25.6)
Y axis mm (inch) 765 (30.1)
Z axis mm (inch) 520 (20.5)
Rapid (X / Y / Z) m/min (ipm)
40/40/36(1574.8/1574.8/1417.3)
A / C axisTable Size mm (inch) ø 630 (ø24.8)
A axis (deg) +30~-120
C axis (deg) 360
Rapid (A / C) r/min 20 / 30
45
30
15
0
0 360 720 1080 1440 1800 2160 2520 2880 3240 3600 3960 4320 4680 5040 5400 5760
-15
-30
-45
Dis
plac
emen
t (μm
)
Time (sec / 10)
04
The one piece bed is a rigid and heavily ribbed Meehanite casting that stays stable under the heavy cutting conditions. Fine grained Meehanite cast iron is used for its excellent vibration absorbing property. The VC630/5AX features a superior traveling column design. The table, and therefore the workpieces remain locked during machining. This design provides a uniform load to the guideways, ball screws and motors.
Tool boy
Magazine
Cam box
Changer arm
One Piece Construction
Automatic Tool Changer
Machine StructureThe VC630/5AX provides high-precision machining for extremly rigid construction designedby 3D simulation and the high precision units of advanced technology.
High-Strength Roller LMG
• High-stiffness roller type LMG, ball screw & coupling
• Strong 45 size roller type linear guide way
Tool to Tool time : 1.0 s
40 tool cam ATC (60, 80, 101, 121 tool)std. opt.
Static RigidityThe static rigidity structure of the VC630/5AX has been increased by 30% through the FEM analysis.
Dynamic RigidityFEM analysis was also used to improve the frequency response and vibration damping property by 35% over the previous design.
• FEM analysis used to design a stable body. (FEM : Finite Element Method)
Rigid Design
Demo Item Hinge Fitting
Workpiece size 270 x 138 x 90 mm(10.6 x 5.4 x 3.5 inch)
Material AL7075
Mold Package DSQ 1
Machining Condition
Cutting Finish
Tool ø12 mm Ball EM
Spindle speed 12000 r/minFeedrate 1000 mm/min (39.4 ipm)
Demo Item Tire Mold
Workpiece size 400 x 400 x 150 mm(15.7 x 15.7 x 5.9 inch)
Material Wood plastic
Mold Package 332 Tuning Cycle (Heidenhain Itnc530)
Machining Condition
Cutting Finish
Tool ø0.8mm Ball EM
Spindle speed 24000 r/minFeedrate 400 mm/min (15.7 ipm)
Demo Item Impeller
Workpiece size D290 x 153 mm(D11.4 x 6.0 inch)
Material AL7075
Mold Package DSQ 3
Machining Condition
Cutting Finish
Tool ø8 mm Ball EM
Spindle speed 12000 r/minFeedrate 2500 mm/min (98.4 ipm)
Coolant tank capacity 360L (95.1 gal)
Easy to discard chips piled up
05
Convenience
Machining Application
Automatic retractable top door
Internal screw conveyor
Shower coolant
Large capacity coolant tank with chip pan and box filter
Flood coolant
Chip conveyor
Hinge type Scraper type Drum filter type
Overhead crane can be used- Heavy workpieces can be conveniently load / unloaded
opt.
opt.
06
60 / 81 / 101 / 121 Tools - Various capacity magazines are available. The Increased tool capacity will improve user convenience and efficiency.
Auto Pallet Changer
High-Capacity Magazines
101 Tools 121 Tools
60 Tools 81 Tools
SpecifcationsPallet Size mm (inch) 500 x 500 (19.7 x 19.7)
Max. Workpiece Size (øD x H) mm (inch) ø 730 x 450 (ø 28.7 x 17.7)
Max. Workpiece Weight kg (lb) 500 (1102.3)
APC Change Time s 30
High efficiency APC is available to setup while the current workpiece machining.
Various options
4231 (166.6)
3200 (126.0) (MACHINE) 231(9.1)
1820
(71.
7) (W
/APC
)35
37 (1
39.3
) (M
ACH
INE)
1056
5357
(210
.1)
6413
(252
.5)
3295
(129
.7)
6413 (252.5)
800 (31.5)(EXTENTION TOOLS)
07
Unit : mm (inch)
Top View
Standard Type
3200 (126.0)
3537
(139
.3)
1280 (50.4) 910 (35.8) 1012 (39.8)
395
607
838
550
(15.
6)(2
3.9)
(33.
0)(2
1.7)15
0 (5
.9)
1130
(44.
5)97
0 (3
8.2)
3295
(129
.7)
1388
607
770
(30.
3)62
7 (2
4.7)
780(
30.
7)65
8 (2
5.9)
116
(4.6
)
315
(12.
4)(2
3.9)
(54.
7)(2
1.0)
(14.
7)
355(14.0) (30.9) (30.9) (43.3) (20.2)
785 785 1100 512
533
373
1050
(41.
3)
R550 (21.7)
R450 (17.7)
Front View
Side View
APC Type
Front View
Side View
External Dimensions
Top View
08
Tool Shank
Unit : mm (inch)
95 95100 100 100
590 (23.2)
100(3.7) (3.9) (3.9) (3.9) (3.9) (3.7)
Ø 18(0.7)
30 (1
.2)
20 (0
.8)
500
(19.
7)25
0 (9
.8)
250
(9.8
)10
050 (2.0
)(3
.9)
(3.9
)(3
.9)
(3.9
)(2
.0)
50(2.0) (3.9) (3.9) (3.9) (3.9) (2.0)
50100
250 (9.8) 250 (9.8)500 (19.7) 25 (1.0)
100 100 100
5010
010
010
0
210
(8.3
)80
(3.1
)
200
(7.9
)15
0 (5
.9)
150
(5.9
)
85 (3
.3)
155 (6.1) 155 (6.1)
80 (3.1) 240 (9.4)
118˚Ø 20(0.8)
0.5
(0.0
2)
20 (0
.8)
306
(1.2
)(0
.24)24-M16×2.0
CLAMP(A)(Optional) PT 1/4"
CLAMP(B)(Optional)PT 1/4"
AIR BLAST(Optional)PT 1/4"
12 (0
.5)
30 (1.2)
+0.0270
Ø 30(1.2)
+0.0210Ø 30
(1.2)
+0.0210
Ø 630 (24.8)
16.6 TAPER GAGE LINE
TAPER GAGE LINE
7/24 TAPER
7/24 TAPER
M16×P2.0
M16×P2.0 M16×P2.0M16×P2.0
28 264
220
(DIN shape) (DIN shape)
10
Ø 6
3
Ø 5
3
Ø 1
7
Ø 7
HO
LE
Ø 2
3
Ø 1
4
Ø 1
9
Ø 1
7
25
23
29
24
16.1
2.85
0.43
60˚
60˚
15˚
30˚
0.63 2.69
0.13 GAGE PIN
7/24 TAPER
0.9 0.98
15.9
18.5
25 22.8
18.5
16.1
68.4
35
11.1
3.2
0.63
TAP “T”
THREAD “T”
0.080.79
0.16
1.021.1
Ø 2
.5
Ø 0.28 (GAGE P
IN)
Ø 2
.21
Ø 0
.67H
7
Ø 0
.91
Ø 0
.55
Ø 7
2.3
Ø 6
3.55
Ø 7
Ø 5
0
Ø 1
7
Ø 2
3
Ø 1
7
Ø 1
4
Ø 1
9
Ø 7
HO
LE
Ø 4
4.45
Ø 0
.75
Ø 0
.28
1.7522.622.6
Ø 4
4.45
60˚15˚
30˚L
265.4
16.6 TAPER GAGE LINE
TAPER GAGE LINE
7/24 TAPER
7/24 TAPER
M16×P2.0
M16×P2.0 M16×P2.0M16×P2.0
28 264
220
(DIN shape) (DIN shape)
10
Ø 6
3
Ø 5
3
Ø 1
7
Ø 7
HO
LE
Ø 2
3
Ø 1
4
Ø 1
9
Ø 1
7
25
23
29
24
16.1
2.85
0.43
60˚
60˚
15˚
30˚
0.63 2.69
0.13 GAGE PIN
7/24 TAPER
0.9 0.98
15.9
18.5
25 22.8
18.5
16.1
68.4
35
11.1
3.2
0.63
TAP “T”
THREAD “T”
0.080.79
0.16
1.021.1
Ø 2
.5
Ø 0.28 (GAGE P
IN)
Ø 2
.21
Ø 0
.67H
7
Ø 0
.91
Ø 0
.55
Ø 7
2.3
Ø 6
3.55
Ø 7
Ø 5
0
Ø 1
7
Ø 2
3
Ø 1
7
Ø 1
4
Ø 1
9
Ø 7
HO
LE
Ø 4
4.45
Ø 0
.75
Ø 0
.28
1.7522.622.6
Ø 4
4.45
60˚15˚
30˚L
265.4
16.6 TAPER GAGE LINE
TAPER GAGE LINE
7/24 TAPER
7/24 TAPER
M16×P2.0
M16×P2.0 M16×P2.0M16×P2.0
28 264
220
(DIN shape) (DIN shape)
10
Ø 6
3
Ø 5
3
Ø 1
7
Ø 7
HO
LE
Ø 2
3
Ø 1
4
Ø 1
9
Ø 1
7
25
23
29
24
16.1
2.85
0.43
60˚
60˚
15˚
30˚
0.63 2.69
0.13 GAGE PIN
7/24 TAPER
0.9 0.98
15.9
18.5
25 22.8
18.5
16.1
68.4
35
11.1
3.2
0.63
TAP “T”
THREAD “T”
0.080.79
0.16
1.021.1
Ø 2
.5
Ø 0.28 (GAGE P
IN)
Ø 2
.21
Ø 0
.67H
7
Ø 0
.91
Ø 0
.55
Ø 7
2.3
Ø 6
3.55
Ø 7
Ø 5
0
Ø 1
7
Ø 2
3
Ø 1
7
Ø 1
4
Ø 1
9
Ø 7
HO
LE
Ø 4
4.45
Ø 0
.75
Ø 0
.28
1.7522.622.6
Ø 4
4.45
60˚15˚
30˚L
265.4
Standard Type APC Type
CAT40 Unit: inchBT40 Unit: mm
DIN40 Unit: mm
Table Dimension
Features Unit VC 630/5AX VC 630/5AX with APC
Travels
X-axis mm (inch) 650 (25.6)Y-axis mm (inch) 765 (30.1)Z-axis mm (inch) 520 (20.5)
A-axis deg. 150 (+30~ -120)
C-axis deg. 360
Distance from spindle nose to table top mm (inch) 210 ~ 730 (8.3 ~ 28.7) 160 ~ 680 (6.3 ~ 26.8)Distance from spindle center to column guideway mm (inch) 220 (8.7)
Feedrate
Rapid traverse rate (X / Y / Z) m/min (ipm) 40 / 40 / 36 (1574.8 / 1574.8 / 1417.3)Rapid traverse rate (A / C) r/min 20 / 30
Cutting feedrate (X / Y / Z) m/min (ipm) 18000 (708.7)
Cutting feedrate (A / C) deg/min 7200
Table
Table size mm (inch) ø 630 (24.8) 500 x 500 (19.7 x 19.7)Table loading capacity kg (Ib) 500 (1102.3)Max. workpiece swing diameter x height mm (inch) ø 730 x 500 (ø 28.7 x 19.7) ø 730 x 450 (ø 28.7 x 17.7)
Minimum table indexing angle - 0.001
Spindle
Max. spindle speed r/min 12000 {20000}
Spindle taper - ISO#40 7 / 24 Taper
Max. spindle torque N.m (ft.lb) 204 (150.6) [25% ED]
Automatictool changer
Type of tool shank - MAS403 BT40
Tool storage capacity ea 40 {60 / 81 / 101 / 121}
Max. tool diameter mm (inch) ø 80 (ø 3.2)Max. tool diameter without adjacent tools mm (inch) ø 125 (ø 4.9)Max. tool length mm (inch) 300 (11.8)
Max. tool weight kg (Ib) 8
Method of tool selection - Fixed address
Tool change time (tool-to-tool) s 1.0
Tool change time (chip-to-chip) s 8.5
Automaticpallet changer
Number of pallet ea - 2
Type - - Rotary shuttle
Pallet change time s - 30
Motor Spindle motor (30min./cont.) kW (Hp)FANUC: 22 / 18.5 (29.5 / 24.5)
HEIDENHAIN: 32 / 24 (42.9 / 32.2)
Powersource
Electric power supply kVA 54
Compressed air supply MPa 0.54
Tankcapacity
Coolant tank capacity L (galon) 360 (95.1)
Lubrication tank capacity L (galon) 1.32 (0.4)
Machine Dimensions
Machine dimension (L x W x H) mm (inch)3295 x 4585 x 3200
(129.7 x 180.5 x 125.9)3295 x 6413 x 3431
(129.7 x 252.4 x 135.0)
Machine weight kg (Ib) 12500 (27557.4) 16000 (35273.4)
09
{ } : option
Standard Feature• Assembly & operation tools• Automatic power off• Automatic tool measurement
(TS27R)• Coolant tank & chip pan• Door interlock• Flood coolant• Full enclosure splash guard• Installation parts• Operator call lamp
(yellow, red, green)
• Portable MPG• Screw conveyor• Spindle air curtain• Spindle head cooling system• Spindle thermal compensation• Work light• DSQ1 (AICC II_200 Block
Machine condition selection function)
• Air blower• Air dryer• Automatic workpiece measurement• Chip conveyor & chip bucket• MQL
(minimum quantity lubrication)• Oil mist collector• Oil skimmer• Test bar• Through spindle coolant system
• Linear scale (X, Y, Z axis)• DSQ 2 : (AICC II + Machine
condition selection function + Data server + 1GB)
• DSQ 3 : (AICC II with High speed processing + Machine condition selection function + Data server +1GB)
Optional Feature
Machine Specifications
• The specifications and information above-mentioned may be changed without prior notice.• For more details, please contact Doosan
10
AXES CONTROL- Controlled axes 5 (X, Y, Z, A, C)- Simultaneous controlled axes
Positioning (G00) / Linear interpolation (G01) : 5 axesCircular interpolation (G02, G03) : 2 axes
- Emergency stop / overtravel- Least command increment 0.001mm/0.0001"- Least input increment 0.001mm/0.0001"- Machine lock all axes / Z axis- Mirror image Reverse axis movement
(setting screen and M-function)- Stored pitch error compensation
Pitch error offset compensation for each axis- Stored stroke check 1, 2, 3 Overtravel controlled by software- High speed HRV3 function- Rotary axis control
INTERPOLATION & FEED FUNCTION- 2nd, 3rd, 4th reference point return G30- Circular interpolation G02, G03- Exact stop check G09, G61(mode)- Feed per minute mm / min- Feedrate override (10% increments) 0 - 200 %- Jog override (10% increments) 0 - 200 %- Manual handle feed (1 unit)- Manual handle feedrate 0.1 / 0.01 / 0.001 mm- Override cancel M48 / M49- Rapid traverse override F0 (fine feed), 25 / 50 / 100 %- Reference point return G27, G28, G29- Skip function G31- Helical interpolation - DSQ 1 (AICC II + Machine condition selection function) 200 block preview- Thread cutting, synchronous cutting- Automatic corner deceleration- Rapid traverse bell-shaped acceleration / deceleration- Smooth backlash compensation- Nano smoothing- Position switch
- Program stop / end M00/M02, M30- Programmable data input
Tool offset and work offset are entered by G10, G11- Sub program Call Up to 10 nesting- Tape Code SO / EIA Automatic discrimination- Work coordinate system G52 - G59- Additional work coordinate system (48 Pair) G54.1 P1 - 48 pairs- Coordinate system rotation G68, G69- Optional chamfering / corner R- Macro executor
OTHERS FUNCTIONS (Operation, Setting & Display, etc)- Alarm display- Alarm history display- Actual cutting speed display- Clock function- Cycle start / Feed hold- Display of PMC alarm message
Message display when PMC alarm occurred- Dry run- Embedded Ethernet- Graphic display Tool path drawing- Help function- Loadmeter display- MDI / DISPLAY unit 10.4" Color LCD, Keyboard for data input, soft-key- Memory card interface- Operation functions Tape / Memory / MDI / Manual- Operation history display- DNC operation with memory card- Program restart)- Run hour and part number display- Search function Sequence NO. / Program NO.- Self - diagnostic function- Servo setting screen- Single block- Multi language display
OPTIONAL SPECIFICATIONS- 3-dimensional coordinate conversion- 3-dimensional tool compensation- Addition of tool pairs for tool life management 1024 pairs- Additional controlled axes max. 6 axes in total- Additional work coordinate system G54.1 P1 - 300 (300 pairs )- DSQ 2 (DSQ 1+Data server [1GB])- DSQ 3 (DSQ 2+High Speed Processing)- Automatic corner override G62- Chopping function G81.1- Cylindrical interpolation G07.1- Exponential interpolation- Interpolation type pitch error compensation- EZ Guide i (Doosan infracore Conversational Programming Solution)
with 10.4" Color TFT- Tape format for FS15- Increment system C- Figure copying G72.1, G72.2- Manual handle feed 2/3 unit- Handle interruption- High speed skip function- Involute interpolation G02.2, G03.2- Look ahead control G08- Machining time stamp function- Number of registerable programsexpansion 2 1000 ea- Tool Offset Pairs 99 / 200 / 400 / 499 / 999 / 2000 ea- Optional block skip addition 9 blocks- Part program storage
512KB(1280m)/1MB(2560m)/2MB(5120m)/8MB(20480m)- Playback function- Polar coordinate comman G15 / G16- Polar coordinate interpolation G12.1 / G13.1- Programmable mirror image G50.1 / G51.1- Single direction positioning G60- Tool load monitoring function (doosan)
SPINDLE & M-CODE FUNCTION- Auxiliary function ( M Function) M 3 digits- Spindle orientation- Spindle speed override (10% increments) 10 - 150%- Spindle output switching- Rigid tapping G84, G74
TOOL FUNCTION- Tool nose radius compensation G40, G41, G42- Number of tool offsets 64ea- Tool length compensation G43, G44, G49- Tool Function T2 digits- Tool life management H/D code, Geometry/Wear memory- Tool offset memory C
PROGRAMMING & EDITING FUNCTION- Absolute / Incremental programming G90/G91- Background editing G73, G74, G76, G80-G89, G99- Canned cycle- Circular interpolation by radius programming- Custom macro B- Custom Software Size 512 kb- Reader Puncher Interface RS-232C- Increment System B Maximum commandable value
(±9999.9999 inch, ±99999.999 mm)- No. of Registered programs 500ea- Optional stop M01- Part program storage 640(256k) m- Program file name 32 characters- Sequence number O4-digit
Fanuc 31i-A5
NC Unit Specifications
11
AXES CONTROL- Controlled axes X , Y, Z, C, A 5 axes
- Simultaneously controllable axes
Positioning / Linear interpolation 5 axes
Circular interpolation 2 axes
Helical interpolation 5 axes
- Feedrate override 0 - 150 %
- Least command increment 0.0001 mm (0.0001 inch)
- Least input increment 0.0001 mm (0.0001 inch)
- Maximum commandable value ±99999.999mm (±3937 inch)
- Pulse handle feed Portable manual pulse generator
Machine Model : VC630/5AX
Portable manual pulse generator
Linear / non-linear axis error, backlash
Reversal spikes during circular movement
Offset, thermal expansion, stiction, sliding friction
- Reference point return
SPINDLE FUNCTION- Spindle orientation
- Spindle speed command S5 digits
- Spindle speed override 0 - 150 %
TOOL FUNCTION- 3-dimensional tool compensation
- Number of tool offsets 999 ea
- Tool length compensation
- Tool management (tool table)
- Tool management (tool table) Tool numbers and names
- Tool management (tool table) Tool length L and tool radius R
- Tool management (tool table) Tool life management & replacement tool
- Tool number command
- Tool radius compensation
Touch probe functions
for automatic workpiece measurement
- Block processing time 0.5 m [s]
- Contour elements
Straight line, champer, circular arc,
circle center, circle radius
Corner rounding, tangentially connecting circle, B spline
- Coordinate transformation
Coordinate shift, coordinate rotation
Mirror image, scaling
Tilting the working plane
- Data interface RS - 232C / Ethernet (100Base T)
- Fixed cycle (canned cycle)
Machine Model : VC630/5AX
Drilling cycle
(drilling, pecking, reaming, boring, tapping, rigid tapping)
Milling, finishing rectangular, circular pockets
Linear and circular hole patterns
Linear and circular hole patterns
Milling pockets and islands
Cylindrical surface interpolation
- FK free contour programming
- Mathematical functions
+, -, x, ÷, √, sin, cos, tan, arcsin, arccos, arctan
Logical comparision (=, ≠, <, >, ≤, ≥)
- Program jumps Subprograms, program section repeats
- Programming support
Functions for approaching / departing the contour
On- screen pocket calculator, structuring of programs
GRAPHIC FUNCTIONS- Gaphic display
Interactive programming graphics
Test run graphics (3-D representation)
Program run graphics (3-D representation)
- MDI / CRT unit 15.1" TFT color flat panel
OPTIONAL SPECIFICATIONS- Controlled axes Max. 12 axes in total
- Digitizing with 3-D triggering touch probe
- Digitizing with 3-D measuring touch probe
- Collision Monitoring Milling (DCM)
- Kinematics OPT
PROGRAMMING & EDITING FUNCTION- Background editing
- Heidenhain coversational format programming
- Program memory Hard disk with 26GB for NC programs
No limit on number of promgrams
- 3-D touch probe application
Touch probe functions for
compensating workpiece misalignment
Touch probe functions for setting data
Heidenhain iTNC 530
Head OfficeDoosan Tower 20th FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea 100-730 Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699
Doosan Infracore America Corp.19A Chapin Rd. Pine Brook, NJ 07058, U.S.A. Tel : ++1-973-618-2500 Fax : ++1-973-618-2501
Doosan Infracore Germany GmbHEmdener Strasse 24 D-41540 Dormagen Germany Tel : ++49-2133-5067-100 Fax : ++49-2133-5067-001
Doosan Infracore Yantai Co., LTD13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233) Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389
- The specifications and information above-mentioned may be changed without prior notice.- For more details, please contact Doosan.
EN 140829SU
http://www.doosaninfracore.com/machinetools/