simultaneous taper & flange fit · 2019. 12. 12. · square tool holders – 1.000" 5...
TRANSCRIPT
BCV50 BIG-PLUS® TOOLING
C6 BIG CAPTO TOOLING
OKUMA VTM-65 • VTM-100 • VTM-200OKUMA VTM-80YB • VTM-120YB • VTM-200YB
BIG DAISHOWA SEIKI CO LTD
FITFIT
SIMULTANEOUS TAPER & FLANGE FITR
PAT.S P I N D L E S Y S T E M
D U A L C O N T A C T
The trademark CAPTO is licensed from Sandvik Coromant
TURNING TOOLS – BIG-PLUS® TOOL SHANKS, BCV50 (ASME B5.50)
BIG-PLUS® Basic BIG CAPTO HolderBIG-PLUS® tool shank with BIG CAPTO C6 modular connection. The exclusive use of dual contact interfaces provides excellent repeatability and rigidity, strengthening the performance for turning operations on VTM’s.
Excellent RepeatabilityHigh repeatability is achieved due to the perfect fit of the self-centering polygon taper.
Superior RigidityHigher rigidity due to larger contact diameter through simultaneous fit of taper and flange face.
Model Shank VTM Model Key No. Orientation
ZEROPOINT
3.00
0L1
3.00
ø2.48 Shank No.ø4.13Turning Key
(supplied)
3.00
0L1
Left Hand CartridgeO.D. Turning/Facing
Right Hand CartridgeID Boring
BCV50
ø1.875ø5.062
2.95
3
Coolant Through
BCV50
ZEROPOINT
3.00
0L1
3.00
ø2.48 Shank No.ø4.13Turning Key
(supplied)
3.00
0L1
Left Hand CartridgeO.D. Turning/Facing
Right Hand CartridgeID Boring
BCV50
ø1.875ø5.062
2.95
3
Coolant Through
BCV50
BCV50-C6-3 OHA C6 65, 100, 200 Oº BCV50-C6-3 OHB C6 80YB, 120YB, 200YB 90º
Block System
• Includes turning key mounted for counter-clockwise table rotation. Key can be moved 180º for clockwise table rotation.
• Use pull stud P50T-2CH11 (below).
• Turning block holders must be purchased separately from your authorized Okuma Distributor.
• Coolant is supplied via spindle face only. Do not use center through coolant option.
• Includes (4) M16 x 40L S.H.C.S.
• Turning key is supplied with turning block holder.
1
Model
BCV50-F47.625-75 OH
Model
P50T-2CH11
Pull Stud Bolts
1.3781.772
3.346
ø1.4
96
1.575
.394
O-ring
ø.236
U1”-8 Thd.
ø.669
60° 30°
ø.906
O-ring
Okuma original turning block holders
BIG CAPTO C6 Modular Tooling System for Turning Operations
BIG CAPTO SYSTEM
BasicHolder
Cartridge
14 kinds of Cartridge Type F for a variety of applications
Coolant Nozzle
Coolant Nozzle
Left Hand
Cartridges are quickly replaced on the machine due to the serious damage on tool holders caused by broken inserts. Repeatable precision of less than .002’’.
5 different basic holders are available and allcan be assembled with either right or left handversions of the cartridge.
Right and left hand cartridges are available
Coding System for Cartridges – All Inserts are ISO/ANSI Standard
CTDV
N RLN
BDouble Clamp
-3º-5º-17.5º-27.5º
Rhombic 80ºTriangular 60ºRhombic 55ºRhombic 35º
0º Negative
5º Positive
7º Positive
Right hand
Left hand
NeutralScrew-On C
Clamping Method Insert Shape Relief Angle Hand
D
S
1,000 PSICOOLANTTHROUGH
(MACHINE OPTION)
BIG CAPTO C6
JLHQ
Lead Angle
BasicHolder
Cartridge
14 kinds of Cartridge Type F for a variety of applications
Coolant Nozzle
Coolant Nozzle
Left Hand
Cartridges are quickly replaced on the machine due to the serious damage on tool holders caused by broken inserts. Repeatable precision of less than .002’’.
5 different basic holders are available and allcan be assembled with either right or left handversions of the cartridge.
Right and left hand cartridges are available
Coding System for Cartridges – All Inserts are ISO/ANSI Standard
CTDV
N RLN
BDouble Clamp
-3º-5º-17.5º-27.5º
Rhombic 80ºTriangular 60ºRhombic 55ºRhombic 35º
0º Negative
5º Positive
7º Positive
Right hand
Left hand
NeutralScrew-On C
Clamping Method Insert Shape Relief Angle Hand
D
S
1,000 PSICOOLANTTHROUGH
(MACHINE OPTION)
BIG CAPTO C6
JLHQ
Lead Angle
Simple and Positive Type F Cartridge Clamping System
Type F uses 2 clamping bolts that presses the cartridge onto the basic holder. The torque is transmitted by an interlocking drive slot.
Cartridges made from high strength alloy steel.
Clamp Bolts
Face Clamping
2
Lead Angle Insert
TURNING TOOLS
3
27.5˚
27.5˚
117.5˚
.630
95˚ .472
(.630
)5˚
5˚
95˚
.472
(.63
0)
5˚
5˚
27.5˚
27.5˚
117.5˚
.630
32˚93˚
.591
3˚
93˚ .6
303˚
93˚
.630
3˚
32˚93˚
.591
3˚
32˚93˚
.591
3˚
32˚93˚
.591
3˚
ZEROPOINT
3.00
0L1
3.00
ø2.48 CAPTOø4.13Turning Key
(supplied)
3.00
0L1
Left Hand CartridgeO.D. Turning/Facing
Right Hand CartridgeID Boring
BCV50
ø1.875ø5.062
2.95
3
Coolant Through
BCV50
ZEROPOINT
3.00
0L1
3.00
ø2.48 CAPTOø4.13Turning Key
(supplied)
3.00
0L1
Left Hand CartridgeO.D. Turning/Facing
Right Hand CartridgeID Boring
BCV50
ø1.875ø5.062
2.95
3Coolant Through
BCV50
Right Hand Left Hand
Boring and Facing Minimum Bore Diameter is 4.33"
O.D. Turning and Facing
-5º
-3º
-27.5º
Rhombic80ºCN
Triangle60ºTN
Rhombic55ºDN
Rhombic55ºDN
L1=+.787"
Rhombic35ºVBVC
ZEROPOINT
3.00
0L1
3.00
ø2.48 CAPTOø4.13Turning Key
(supplied)
3.00
0L1
Left Hand CartridgeO.D. Turning/Facing
Right Hand CartridgeID Boring
BCV50
ø1.875ø5.062
2.95
3
Coolant Through
BCV50
ZEROPOINT
3.00
0L1
3.00
ø2.48 CAPTOø4.13Turning Key
(supplied)
3.00
0L1
Left Hand CartridgeO.D. Turning/Facing
Right Hand CartridgeID Boring
BCV50
ø1.875ø5.062
2.95
3
Coolant Through
BCV50
4
Lead Configuration Model Insert Clamp L Angle Piece
F63-DCLNR-45035-12
-DCLNL-45035-12
-DCLNR-45035-16
-DCLNL-45035-16
-PCLNR-45045-19
-PCLNL-45045-19
-DTJNR-45035-16
-DTJNL-45035-16
-DDJNR-45035-15
-DDJNL-45035-15
-DDJNR-45055-15
-DDJNL-45055-15
-SVQBR-45035-16
-SVQBL-45035-16
-5˚
-5˚
-5˚
-3˚
-3˚
-3˚
-27.5˚
CN43Rhombic 80˚
CN54Rhombic 80˚
CN64Rhombic 80˚
TN33Triangle 60˚
DN43*1
Rhombic 55˚
DN43*1
Rhombic 55˚
VB33 VC33
Rhombic 35˚
CP2
CP3
LeverLock
CP1
CP2
CP2
M3.5*2
1.378
1.378
1.771
1.378
1.378
2.165
1.378
• Wrenches are not included with the cartridges. Please purchase separately.
• *1 DN43 (3/16" thickness) carbide shim is included as standard. In case of DN44 insert (1/4" thickness), please replace the standard carbide shim with DNS1506 (option).
• *2 M3.5 is screw-on type.
Type Model L L1 f
C6-F63-30 1.181 2.559 -75 2.953 4.331 F63 -100 3.937 5.315 1.772 -130 5.118 6.496 -170 6.693 8.071
Basic Holder Type F
90º Cartridges Type F
L1L
f
L
f=1.772
ø2.480
L1L
f
L
f=1.772
ø2.480
Right Hand
Left Hand
Boring and Facing Minimum Bore Diameter is 4.33"
O.D. Turning and FacingFor SPARE PARTS PG. 5
See CAPTO CATALOG EXi183
See BIG-PLUS CATALOG EXi48
See PROFIT MAKER CATALOG EXi302
SQUARE TOOL HOLDERS – 1.000"
5
1.510
Interference ø3.937
1.00
0
.240
3.15
0
4.33
1
1.5751.575
Interference ø3.937
1.00
0
1.260
4.11
8
5.11
8
180 TypeRight Hand Left Hand Neutral
90 TypeAvailable for applications such as turning, grooving, parting and threading.
Model
C6-180-BH1.000R-4.375
Model
C6-180-BH1.000L-4.375
Model
C6-90-BH1.000N-5.125
Spare Parts for Turning ToolsDouble-clamping system of ‘push and draw’ assures the safe clamping of inserts.
Carbide Shim
Clamp Screw
Insert
Shim Screw
Clamp Piece
Spring
Insert Size Set Model Clamp Piece Screw Spring
TN33 SCP-1 CP1 CN43 DN43
SCP-2 CP2
M5 x 20 ø8 x 10
CN54 SCP-3 CP3
Insert Size Set Model Carbide Shim Screw Torx Size
CN43 CN54 CN64 TN33 DN43 DN44
Clamp Piece Set
Carbide Shim Set
SCNS1204SCNS1606SCNS1906STNS1604SDNS1504SDNS1506
CNS1204CNS1606CNS1906TNS1604DNS1504DNS1506
M4 x 8M5 x 12M5 x 12M3 x 7
M4 x 8
T15
T20
T10
T15
Insert Clamping Screw Set
Model
S3508DS
Contents:M3.5 screws ....... 10 pcs.Wrench DA-T15 ......1 pc.
• A set contains one carbide shim and screw.
• A wrench is not included. Please order separately (Model: DA-T10, DA-T15, DA-T20).
For VB33 Insert
• A set contains one clamp piece, screw and spring.
• A wrench is not included. Please order separately (Model: T-H).
6
TURNING TOOLS
LH
L1G L2 L2
øD ødPlug A
Plug B
Center-throughSide-through
LH
L1G L2 L2
øD ød
Plug APlug B
Center-throughSide-through
Boring Bar HolderApplication: Boring and thread cutting
Model ød øD L L1 L2 Bore Depth G H C6-BSL.625-3.5 .625 1.575 3.500 .394 .827 2.559
M10 x 1.25 -BSL.750-3.5 .750 1.969 3.500 .472 .787 2.362 -BSL1.000-4 1.000 2.165 4.000 .551 .906 2.756
M12 x 1.5 -BSL1.250-4.5 1.250 2.520 4.500 .630 1.024 3.071 -BSL1.500-5 1.500 3.150 5.000 .709 1.260 3.661 M16 x 1.5
Clamping Capacity: ø5/8" - ø1-1/2"Metric Sizes Also Available
(ø6, 8, 10, 12, 16, 20, 25, 32 & 40)
Interchangeable between center-through and side-through coolant supply by using plugs.
A Complete Lineup of Rotary Tool Holders Are Also AvailableMany high performance rotary tool holders such as the high precision Mega Chuck series are available.For SPARE PARTS PG. 5
See BIG CAPTO CATALOG EXi183
See BIG-PLUS CATALOG EXi48
See PROFIT MAKER CATALOG EXi302
Plug A Plug B Body
M18 x 1.5 BSL.625
M6 x 1.0 BSL.750
M6 x 1.0 BSL1.000
M8 x 1.25 BSL1.250
BSL1.500
Mega New Model Baby Chuck
ROTATING TOOLS
7
For SPARE PARTS PG. 5
See CAPTO CATALOG EXi183
See BIG-PLUS CATALOG EXi48
See PROFIT MAKER CATALOG EXi302
For more information on Perfect Seal
Model ød øD L L1 Collet Nut Wrench Max RPM Weight (lbs)
BCV50-MEGA6N-3.5 -MEGA6N-5 -MEGA6N-6 -MEGA8N-3.5 -MEGA8N-5 -MEGA8N-6 -MEGA10N-3.5 -MEGA10N-5 -MEGA10N-6 -MEGA10N-8 -MEGA13N-3.5 -MEGA13N-5 -MEGA13N-6 -MEGA13N-8 -MEGA16N-3.5 -MEGA16N-5 -MEGA16N-6 -MEGA16N-8 -MEGA20N-3.5 -MEGA20N-5 -MEGA20N-6 -MEGA20N-8
.010 - .236
.020 - .315
.059 - .394
.098 - .512
.098 - .630
.098 - .787
.787
.984
1.181
1.378
1.654
1.811
3.505.006.003.505.006.003.505.006.008.003.505.006.008.003.505.006.008.003.505.006.008.00
1.723.034.031.723.034.031.723.034.036.031.723.224.036.031.723.224.226.221.803.224.226.22
NBC6-
NBC8-
NBC10-
NBC13-
NBC16-
NBC20-
MGN6
MGN8
MGN10
MGN13
MGN16
MGN20
MGR20
MGR25
MGR30
MGR35
MGR42
MGR46
20,00020,00015,00020,00020,00015,00020,00020,00015,00012,00018,00018,00016,00012,00017,00017,00016,00013,00016,00016,00015,00013,000
6.95 7.06 7.28 7.06 7.39 7.61 7.28 7.72 7.94 8.60 7.50 8.05 8.49 9.26 7.83 8.71 9.26 10.36 8.05 9.04 9.70 11.03
Mega New Baby ChuckHigh precision collet and well-balanced design provide stable performance during high speed cutting.
• Mega New Baby Nut is included. Collet and wrench must be ordered separately.
• Weight does not include collet.
• Designed to be capable of supplying coolant through spindle and flange.
• The “Max” allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of the cutting tool. Therefore, the “Max” allowable speed may not always be achievable.
Clamping Capacity: ø.010" - ø.787"
ødøD
L
L1BCV50
Coolant bores in accordance to DIN69871/Form B
MEGA6NMEGA8NMEGA10NMEGA13NMEGA16N MEGA20N
MGN6MGN8 MGN10 MGN13 MGN16 MGN20
MGR20MGR25 MGR30MGR35MGR42MGR46
NBC6- NBC8-NBC10- NBC13- NBC16- NBC20-
MPS6- MPS8- MPS10- MPS13- MPS16- MPS20-
NBA6B NBA8BNBA10BNBA13BNBA16B NBA20B
M7 M9 M11 M14M18M21
.472
.512
.630
.787
.787
.787
.079
.098
.118
.157
.157
.157
Model Model Model Model G L B
Included Accessories (Need to be ordered separately)Mega Nut Mega Wrench Collet Mega Perfect Seal Adjusting
Screw
B L
G
Rubber Seal
8
Mega E ChuckUtilizes advanced technology of New Baby Collet Chucks for powerful and precise high speed end milling.
Model ød øD L L1 Collet Nut Wrench Max RPM Weight (lbs)
BCV50-MEGA6E-4 -MEGA6E-5 -MEGA6E-6 -MEGA8E-4 -MEGA8E-5 -MEGA8E-6 -MEGA10E-4 -MEGA10E-5 -MEGA10E-6 -MEGA10E-8 -MEGA13E-4 -MEGA13E-5 -MEGA13E-6 -MEGA13E-8
.125 - .250
.125 - .250
.125 - .375
.125 - .500
.984
1.181
1.378
1.654
4.005.006.004.005.006.004.005.006.008.004.005.006.008.00
MEC6-
MEC8-
MEC10-
MEC13-
MEN6
MEN8
MEN10
MEN13
MGR25
MGR30
MGR35
MGR42
20,00020,00014,00020,00020,00016,00020,00020,00016,00013,00018,00018,00016,00012,000
7.39 7.83 8.38 7.72 8.27 9.04 8.05 8.60 9.59 11.91 8.49 9.26 10.58 12.79
2.423.424.422.223.224.222.223.224.226.502.423.424.426.50
Clamping Capacity: ø.125" - ø.500"
ød øD
L
L1BCV50
Coolant bores in accordance to DIN69871/Form B
• Mega E Nut is included. Collet and wrench must be ordered separately.
• Weight does not include collet.
• Designed to be capable of supplying coolant through spindle and flange.
• The “Max” allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of the cutting tool. Therefore, the “Max” allowable speed may not always be achievable.
Model ød Min. Clamping Length
MEC6-3AA -4AA -5AA -6AA
.118
.157
.197
.236
.748 .866 .9841.063
MEGA6E
Model ød Min. Clamping Length
MEC8-3AA -4AA -5AA -6AA -7AA -8AA
.118
.157
.197
.236
.276
.315
.748 .866 .9841.1021.1421.220
MEGA8E
Model ød Min. Clamping LengthMEC10-3AA -4AA -5AA -6AA -7AA -8AA -9AA -10AA
.118
.157
.197
.236
.276
.315
.354
.394
.748 .866 .9841.1021.1611.2201.2991.457
MEGA10E
Mega E Collet
Model ød Min. Clamping LengthMEC13-3AA -4AA -5AA -6AA -7AA -8AA -9AA -10AA -11AA -12AA
.118
.157
.197
.236
.276
.315
.354
.394
.433
.472
.748 .866 .9841.102 1.1611.2201.2991.3781.4571.535
MEGA13E
ød øA
B
.00004" .00012"
4d
ød
ød øA
B
.00004" .00012"
4d
ød
Collet Class T.I.R. At Nose At End of Test Bar
AA Within .00004"
Within .00012"
MEGA6E: øA=.445, B=1.374MEGA8E: øA=.555, B=1.551MEGA10E: øA=.673, B=1.799MEGA13E: øA=.811, B=1.886
ROTATING TOOLS
9
Mega Double Power ChuckSimultaneous fit is achieved on the nut as well as the taper shank to obtain rigidity close to an integral body.
Clamping Capacity: ø.625" - ø.1.500"
BCV50
ød øD øD1
L
H
Coolant
Coolant bores in accordance to DIN69871/Form B
Model ød øD øD1 L H Wrench Max RPM Weight (lbs)
BCV50-MEGA.625DS-4 -6 -MEGA.750DS-4 -6 -MEGA1.000DS-4 -6 -MEGA1.250DS-4 -6 -MEGA1.500DS-4.5
1.811
2.362
2.756
3.150
3.898
.625
.750
1.000
1.250
1.500
2.480
2.717
3.031
3.386
3.925
4.09 6.09 4.09 6.09 4.09 6.09 4.09 6.09 4.50
MGR46
MGR60
MGR70
MGR80
MGR99
21,00019,00020,00017,00020,00017,00020,00015,00015,000
8.82 10.80 9.92 13.01 10.58 14.33 11.25 15.88 14.55
2.88
3.44
3.63
4.22
4.29
• Wrench must be ordered separately.
• The “Max” allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of the cutting tool. Therefore, the “Max” allowable speed may not always be achievable.
• Tools w/ flats should not be clamped w/ Mega Double Power Chuck.
Straight Collet (Type C) Clamping Size Model ød
C.750-1/4 -5/16 -3/8 -7/16 -1/2 -9/16 -5/8C.750-6 -8 -10 -12 -16
.250 .312 .375 .437 .500 .562 .625 6.0 8.0 10.0 12.0 16.0
MEGA.750DS
MEGA.750DS: D=.750, L=2.36MEGA1.000DS: D=.750, L=2.70MEGA1.250DS: D=1.250, L=2.91
L
øD ød
InchSize
MetricSize
Clamping Size Model ød
C1.250-1/4 -5/16 -3/8 -7/16 -1/2 -9/16 -5/8 -11/16 -3/4 -13/16 -7/8 -15/16 -1C1.250-12 -14 -16 -20 -25
.250 .312 .375 .437 .500 .562 .625 .687 .750 .812 .875 .937 1.000 12.0 14.0 16.0 20.0 25.0
MEGA1.250DS
InchSize
MetricSize
Clamping Size Model ød
C1.000-1/4 -3/8 -1/2 -5/8 -3/4
.250 .375 .500 .625 .750
MEGA1.000DS
InchSize
7/16" - 20
9/16" - 18
5/8" - 18
3/4" - 16
1" - 14
10
End Mill Holder
Shrink Fit Holder
Shell Mill Adapter
LH
L1
G
ød
øD
Fig. 1
LHL2 L1
2-G
ød øD
Fig. 2
Model Fig. ød øD L L1 L2 H G
BCV50-EM.500-4.5 -6 -EM.625-4.5 -6 -EM.750-4.5 -6 -EM1.000-4.5 -6 -8 -EM1.250-4.5 -6 -8 -EM1.500-4.5 -6 -8 -EM2.000-6
1.375
1.625
1.750
2.252
2.750
3.500
.500
.625
.750
1.000
1.250
1.500
2.000
4.506.004.506.004.506.004.506.008.004.506.008.004.506.008.006.00
1.000
1.375
3.000
3.500
3.875
3.125
4.330
.874
.937
1.000
1.125
1.375
-1
2
Model ød øD1 øD2 L L1 E
BCV50-SF.500-4 -SF.625-4 -SF.750-4 -6 -SF1.000-4 -6 -SF1.250-4 -6
.500 .625
.750
1.000
1.250
L
ød øD1
L1
4.5º
øD2
E
.945 1.063
1.299
1.732
1.2601.339
1.654
2.087
4.004.004.00 6.004.00 6.004.006.00
.730
.639
.822
1.4171.535
1.614
1.850
2.008
.313
.375
.500
.625
.750
1.000
Model Fig. øD1 øD2 øD3 L L1 L2 L3 W
BCV50-SM.750-2 -4 -SM1.000-2 -4 -6 -8 -10* -12* -SM1.250-2 -4 -6 -SM1.500-2 -4 -6 -8 -10* -12* -SM2.000-2 -4 -SM2.500-2.5
.875
1.118
1.500
1.875
2.500
3.125
.750
1.000
1.250
1.500
2.000
2.500
2.00 4.00 2.00 4.00 6.00 8.00 10.00 12.00 2.00 4.00 6.00 2.00 4.00 6.00 8.00 10.00 12.00 2.00 4.00 2.50
.156
.219
.281
.375
.438
.375
.500
.689
.929
1.126
1
2
1.689
2.189
2.752
3.626
4.874
4.874
LH
L1
G
ød
øD
Fig. 1
LHL2 L1
2-G
ød øD
Fig. 2
L L1
L3
L2
W øD1
øD2
øD3
Fig. 1
L L1
L3
L2
W øD1
øD2
øD3
Fig. 2
4 x 5/8"-114" B.C.
• For high speed applications, Shell Mill Adapters should be balanced together with the cutters.* Tapered body for increased rigidity.
L L1
L3
L2
W øD1
øD2
øD3
Fig. 1
L L1
L3
L2
W øD1
øD2
øD3
Fig. 2
4 x 5/8"-114" B.C.
CATALOG No.Bi304-0609-1
R641 Fargo Ave., Elk Grove Village, IL 60007We are moving to a larger facility. Please use address below as of 11/09. 2600 Huntington Blvd., Hoffman Estates, IL 60192Tel: 847.228.7660 • Fax: 847.228.0881web: www.bigkaiser.com • e-mail: [email protected]
Model L A øD
BCV50-2.000-L13.5SD 13.5 212.5
BIG-PLUSL
Effective Test Length A
øD
ANGLE HEADS & TEST BAR
AG90 Series – High Rigidity TypeProvided with a steel housing and reinforced locating pin assembly for applications where increased rigidity is required to perform various types of heavier machining.
Build-Up Type Shank Model Weight (lbs)
BCV50 BCV50-AG90/AGH35-230S-80 35.9
HMC Type
Shank Model Weight (lbs)
BCV50 BCV50-AG90/HMC1.250-230S-80 39.9
For Angle Heads Shown:• The cutter rotates in the same direction of the machine spindle.
• The standard Fixed Length H is .236. Other lengths are available upon request.
• The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0º to 360º.
.394
.079
2.559
3.819
.394
ø4.921
Fixed Length H
03.
937
S=3.1
50
9.055 1.772
ø1.500
.118 Pin Compression
.236 Collar Compression
Gage Line for AG35 Adapters
Draw Bar
1.772 1.772
R .827
ø3.189
ø1.250ø4.921
3.819
Fixed Length H
2.55
9
Min.
Acces
s Bore
ø6.8
90
3.93
7
S=3.
150
9.055 1.772
.118 Pin Compression
.236 Collar Compression
1.772 1.772
R .827
.394
.079
2.559
3.819
.394
ø4.921
Fixed Length H
03.
937
S=3.1
50
9.055 1.772
ø1.500
.118 Pin Compression
.236 Collar Compression
Gage Line for AG35 Adapters
Draw Bar
1.772 1.772
R .827
Dyna Test Bar
ø3.189
ø1.250ø4.921
3.819
Fixed Length H
2.55
9
Min.
Acces
s Bore
ø6.8
90
3.93
7
S=3.
150
9.055 1.772
.118 Pin Compression
.236 Collar Compression
1.772 1.772
R .827
For SPARE PARTS PG. 5
See CAPTO CATALOG EXi183
See BIG-PLUS CATALOG EXi48
See PROFIT MAKER CATALOG EXi302
For a complete list of available Build-Up Type Adapters, Stop Blocks and all other Angle Heads and Accessories