sinamics smart access unrestricted © siemens ag 2018 ......unrestricted© siemens vietnam 2018 page...

SINAMICS SmartAccess

siemens.com/sinamics-accessoriesUnrestricted © Siemens AG 2018

Unrestricted © Siemens Vietnam 2018Page 2 Siemens Digital Ecosystem Partner Conference 2018

Drive technology as a gateway to digitalization

MindAppsInternal or third-party applications fortransforming data into knowledge

MindSphereData transferred to MindSphere orthird-party clouds to generateknowledge

MindConnectConnection to MindSphere viaMindConnect

Drives and motorsIntegration of drives and motors usingengineering tools throughout themachine building cycle


Consistently integrated product portfoliofor drive technology

ServicesProductionexecution

Productionengineering

Productionplanning

Productdesign

Machineservices

Machineoperation

Machinecommissioning

Machineengineering

Machineconcept

NX MCD, SIZER, E-Plan DT Configurator, SIZER,TIA Selection Tool

TIA Portal/SINAMICSStartdrive, SINAMICSWeb server, IOP-2

TIA Portal / SINAMICSStartdrive, SINAMICSWeb server, IOP-2

TIA Portal / SINAMICSStartdrive, IOP-2,SINAMICS Web server,Analyze MyDrives,Motion Control Services


SINAMICS V20/G120 Smart AccessCommissioning, operation and diagnostics at your fingertips

G120CPN/USS/DP

G120/G120PPN/USS/DP

G120 SmartAccess

For Sinamics V20 For Sinamics G120


SINAMICS V20/G120 Smart Access ModuleConnect your mobile/end device in less than one minute

1

Mount Smart Access ontoSINAMICS V20/G120 and

switch on the module

2

Search SINAMICS V20/G120Smart Access in your

Wi-Fi networks(default password: 12345678)

3

Open browser to accessthe page (https://192.168.1.1)

A step 4 for password changing is mandatory for the 1st access4*

SINAMICS G120


SINAMICS V/20G120 Smart AccessMain functions

Backup & restoreQuick way to save or restore theparameterization of the drive.

ParametersCheck and set parameter values. Savethe preferred parameters in acustomizable list or reset the drive tothe factory settings.

MonitoringOverview over the most importantonline values.

DiagnosticsGet a quick overview over all currentfaults and alarms, receive tips how tosolve the issues and acknowledgethe errors. Furthermore the status ofall signal in-/outputs.

Basic commissioningQuick commissioning wizard thatcovers the areas of motor data,connection and application settingsas well as common used parameters.

Control panelControl panel with basic functions.Supporting JOG mode and static setpoint mode.


SINAMICS V20/G120 Smart AccessBottom Toolbar

- PRELIMINARY -

Support

The supportinformation is

displayed here an canbe edited

Settings

System settings formthe SAM can here be

changed

Drive Identification

All importantinformation isdisplayed here


The motor type can be setprecisely

SINAMICS G120 Smart AccessQuick commissioning wizard (1/3)

The inverter can be resetbefore commissioning or the

existing settings can beused

The first step is to choosethe application class

The second step is to set themost important motor data.

Depending on the motortype, the motor data can be

set automatically


It can be selected betweenlinear char and parabolic

char


- PRELIMINARY -

The selected I/Oconfiguration is displayed

The I/O configuration can bechanged by clicking on the

marked button

The next step is to setimportant parameters for the

inverter



- PRELIMINARY -

Before the optimization,a motor data

identification must beperformed

After the completion ofthe commissioning thesettings can be tested

with the JOG


The JOG speed can notbe changed, because it

is defined duringcommissioning

SINAMICS G120 Smart AccessJOG (1/2)

- PRELIMINARY -

The JOG providesfunctions for basic

testing

In order to use the JOGand to cover safety

rules, the control mustbe optained

By default the JOG modeis enabled. Press one

button to spin the drivein the displayed way


Before you can leave thecontrol panel you have to

explicitly return the controlto the normal command

sources

SINAMICS G120 Smart AccessJOG (2/2)

- PRELIMINARY -

To run the drive in “normal”setpoint mode, please

switch from JOG to handmode

Set a speed and start thedrive by pressing the greenbutton. The motor will start

spinning until the stopbutton is pressed

To change the direction inwhich the motor rotates or

stop it use the buttons at thebottom left.


An error report can be sentvia mail by clicking on the

send all button. The defaultmailing program will beopened with the report.

SINAMICS G120 Smart AccessDiagnostics (1/2)

- PRELIMINARY -

Overview over all currentlyactive faults and alarms.More information on the

issue is provided by clickingon the issue.

If needed the fault and alarmhistory can be made visible

by activating the togglebutton at the top.

After fixing the issuecausing the errors clickingthe Acknowledge all faultsbutton will clear the errors

1


SINAMICS G120 Smart AccessDiagnostics (2/2)

- PRELIMINARY -

I/OOverview over all Input and outputchannels of the drive.Shows online values for analog I/Osignals as well as online status“green==1 and gray==0” for digitalI/Os.

Status bitShows the status of the mostimportant bits of the drive internalstate machine.

2 3


SINAMICS G120 Smart AccessParameters (1/2)

- PRELIMINARY -

On this site you get anoverview over all the

parameters of your drive.Values are real time values.

By clicking on a parameteradditional information is

shown and if not locked (e.g.drive state) the parameter

value can be changed

There is a keyword barwhich helps you quickly findthe dedicated parameter you

are looking for

The filter function evenfurther simplifies the workwith the parameter list with

predefined parametergroups.


SINAMICS G120 Smart AccessParameters (2/2)

- PRELIMINARY -

To keep all frequently usedparameters in one group theindividual “My parameters

group” is available.

To customize that grouppress the “+” symbol and

choose the parameters youparticulary interested in by

checking them on.

After changing parametersettings they can be savedto EEPROM or even be setas new user default values

If the drive needs to bereset there is the choicebetween factory settingsand user default settings


SINAMICS G120 Smart AccessMonitoring

- PRELIMINARY -

Online ValuesDisplays the most important online valuesfrom the Inverter

Faults and alarmsIf there are any active faults or alarms thathave an influence on the inverter, theseare displayed in the status


SINAMICS G120 Smart AccessBackup & Restore

- PRELIMINARY -

A backup can be savedand restored from an

SD card

To Create a backup ofyour parameter settingsyou have to set a nameand click on “Back up

After the backup hasbeen created, it can be

downloaded andrestore.

A backup can be savedas readable XML file

Live demo


Thank you!

Nguyen Thanh DuyTechnical ConsultantSLV DF MC GMCMobile: 0904258799E-Mail:[email protected]

siemens.com/

sinamics smart access unrestricted © siemens ag 2018 ......unrestricted© siemens vietnam 2018 page...

Documents