http://www.jst.go.jp/sip/dl/k03/jst_pamphlet_english.pdf

SIP-IMASM 2015

September 29th – October 1st, Tsukuba, Japan

The 1st Symposium of Strategic Innovation Promotion Program − Innovative Measurement and Analysis for Structural Materials (SIP-IMASM) will take place from September 29 to October 1, 2015 at the AIST lecture hall, Tsukuba, Japan. It will consist of a two day workshop and a one day lab tour. The SIP-IMASM is the R&D consortium consisting of the National Institute of Advanced Industrial Science and Technology (AIST), the National Institute for Materials Science (NIMS), Tsukuba University, and the High Energy Accelerator Research Organization (KEK) and focuses on investigations of structural materials relating to aircraft and power plants. The SIP-IMASM team in a field of materials integration under the program of Structural Materials for Innovation whose program director is professor Teruo Kishi and is working to develop unconventional measurement instruments and measurement protocols to acquire information that is inherent in structural materials and essential for the improvement of mechanical performance and the prediction of the lifetimes. Our R&D resources include synchrotron radiation, ion beam analysis with superconducting X-ray analysis, nano-characterization such as the 3D atom probe, and positron annihilation. In this symposium, we will invite authorities in related fields and present our latest R&D results to promote cooperation with researchers over an extensive range of measurement and analysis as well as the above-mentioned analytical techniques.

Contact: m.ohkubo@aist.go.jp

D66: Innovative Measurement and Analysis for Structural Materials (SIP-IMASM)

Extracted from the pamphlet of JST SIP-Structural Materials for Innovation

プログラム概要（時間、タイトルは変更の可能性があります。） 【9月 29日】 ◆09：00 受付 09:50 来賓挨拶 松本英三（内閣府 官房審議官） Guest speech 開会挨拶 大久保 雅隆 (産総研) "Introduction to SIP-IMASM"

「座長: 大久保 雅隆 (産総研)」 10:20 基調講演 岸 輝雄 (内閣府) "Structural Materials for Innovation" 10:50 休憩 Break

11:00 招待講演 J. D. Almer (ANL) "XRD Analysis of Structure Material at APS" 11:50 ランチ（集合写真撮影） Lunch, Symposium Photo

「座長: 木村 正雄 (高エネ研)」 13:20 招待講演 北岡 諭 (JFCC) "Development of Ceramic Environmental Barrier Coatings for

Advanced Airplane Engine Applications" 13:50 招待講演 木村 正雄 (高エネ研) "Application of XAFS & XRD Mapping Techniques for Various

Materials" 14:20 研究発表-1 木村 正雄(高エネ研) "Overview of theme 1: Imaging of Strain, Cracks and Chemical

States for Structural Materials" 14:40 研究発表-1 田中 義久（物材機構）"In-situ Multi-scale Strain Imaging for Composite Materials using

FE-SEM during Mechanical and Thermal Loading" 15:00 研究発表-1 武市 泰男（高エネ研）“Application of XAFS & XRD Mapping Techniques for Various

Materials” 15:20 Coffee Break 15:40 基調講演 香川 豊 (東京大学) "Title:TBA" 16:20 ポスター発表 Posters 18:00 懇親会 Banquet 【9月 30日】

「座長: 喜多 英治 (筑波大学)」 09:00 招待講演 M. Ionescu (ANSTO) "Ion Beam Analysis for Materials Science" 09:50 招待講演 福谷 克之 (東京大学) "Analysis of hydrogen in materials with the 15N nuclear reaction

combined with thermal desorption spectroscopy" 10:20 休憩 Break 10:30 招待講演 武田 展雄 (東京大学) "Life Cycle Monitoring and Quality Assessment of Advanced

Polymer Matrix Composites" 11:00 研究発表-2 喜多 英治 (筑波大学) "Overview of theme 2: Quantitative Elemental Analyses of

Hydrogen and Light Elements in Structural Materials"

1st Symposium on Innovative Measurement and Analysis for Structural Materials (SIP-IMASM2015)

革新的構造材料のための先端計測拠点国際会議 (SIP-IMASM2015)

9 月 29-30 日(シンポジウム), 10 月 1日(ラボツアー) 開催場所 産業技術総合研究所 つくば中央第一 共用講堂

参加登録（日本語）：https://unit.aist.go.jp/neri/ja/event/index.html

11:20 研究発表-2 関場 大一郎 (筑波大学) "IBA for Hydrogen Uptake Observation in Functional Metals under Ambient Condition"

11:40 研究発表-2 Fons Paul (産総研) " XAFS Structural and Chemical Analysis Approach for the Trace Light Elements of B and N in Heat-Resistant Steel"

12:00 ランチ Lunch

「座長: 北澤英明 (物材機構)」 13:20 招待講演 大沼 正人 (北海道大学) "Nanoscale Characterization in Structural Materials by SAXS and

SANS" 13:50 招待講演 北嶋 具教 (物材機構) "Development of High Temperature Titanium Alloys,

Microstructure and Property Prediction Methods" 14:20 研究発表-3 北澤 英明 (物材機構) " Overview of theme 3: Development of Multiscale

Characterization in Structural Materials" 14:40 研究発表-3 宝野 和博 (物材機構) " Microstructure Characterization of Structural Materials using

Laser Assisted 3D Atom Probe" 15:00 研究発表-3 藤田 大介 (物材機構) " Nanoscale Characterization of Structural Composite Materials" 15:20 休憩 Break

「座長: 大島 永康 (産総研)」 15:40 招待講演 白井 泰治 (京都大学) "Positron Annihilation Study of Vacancy-Type Defects in Iron and

Steels" 16:10 招待講演 榎 学 (東京大学) "Development of Performance Prediction System" 16:40 研究発表-4 大島 永康 (産総研) " Overview of theme 4: Positron Annihilation Spectroscopy Based

Research for the SIP-IMASM project" 17:00 研究発表-4 上殿 明良 (筑波大学) " Vacancy-Type Defects and Open Spaces in Solid-State Materials

Probed by Means of Positron Annihilation" 17:20 研究発表-4 和田 健 (高エネ研) " Performance Test of a Pulse Stretch System for Material Sciences

at KEK Slow Positron Facility" 17:40 閉会 Closing 【10月 1日】 ラボツアー（AIST, NIMS, 筑波大, KEK）

ポスター発表（9月 29 日）

1-1 木村 正雄 (高エネ研) “Observation of Heterogeneous Reactions using XAFS, XRD and CT with SR” 1-2 田中 義久（物材機構）"In-situ Multi-scale Strain Imaging for Composite Materials using FE-SEM during

Mechanical and Thermal Loading" 1-3 武市 泰男（高エネ研）“Application of XAFS & XRD Mapping Techniques for Various Materials” 1-4 仁谷 浩明（高エネ研）“Development of XAFS & XRD Mapping Techniques using Semi-Micro Beam at PF

BL-15A1” 1-5 丹羽 尉博（高エネ研）“Development of Nanosecond Time-Resolved Dispersive XAFS System for

Irreversible Phenomena” 1-6 高橋 由美子（高エネ研）“CT imaging of Structure Materials” 1-7 Qinghua Wang（産総研）” Full-Field Deformation Measurement of Carbon Fiber Reinforced Plastics under

Three-Point Bending Test at Micro Scale” 1-8 渡邊 誠（物材機構） "Title:TBA" 2-1 喜多 英治 (筑波大学) "Overview of theme 2: Quantitative Elemental Analyses of Hydrogen and Light

Elements in Structural Materials"

2-2 関場大一郎 (筑波大学) " IBA for Hydrogen Uptake Observation in Functional Metals under Ambient Condition"

2-3 Fons Paul (産総研) " XAFS Structural and Chemical Analysis Approach for the Trace Light Elements of B and N in Heat-Resistant Steel"

2-4 志岐 成友（産総研） ” Superconducting X-ray Spectrometer for Trace Light Elements in Structural Materials”

2-5 藤井 剛（産総研） “Superconducting Energy-Dispersive X-ray Detector for Multi-Element Analysis of Trace Light Elements”

2-6 Byeonchan Suh（物材機構） “Nanostructure Analysis of Heat Resistant Steel” 2-7 佐々木泰祐（物材機構）“3DAP/TEM study on Boron Partitioning Behavior in 9Cr-3Co-3W Heat-Resistant

Steel” 2-8 笹 公和（筑波大学） “6 MV Tandem Accelerator System for Ion Beam Analysis of Structural Materials

at the University of Tsukuba” 2-9 山崎 明義（筑波大学） “Development of the High Resolution Ion Microbeam System for Analysis of

Structural Materials and the Present Results of PIXE Test Measurements at the University of Tsukuba”

2-10君島 堅一（高エネ研）“In situ Observation of Reduction Kinetics of Iron Oxides” 3-1 北澤 英明 (物材機構) " Overview of theme 3: Development of Multiscale Characterization in Structural

Materials" 3-2 宝野 和博 (物材機構) "Microstructure Characterization of Structural Materials using Laser Assisted 3D

Atom Probe" 3-3 藤田 大介 (物材機構) "Nanoscale Characterization of Structural Composite Materials" 3-4 渡邉 騎通（物材機構） "Title:TBA" 3-4 間宮 広明（物材機構） "Title:TBA" 3-4 大西 桂子（物材機構） "Title:TBA" 3-4 木塚 徳志（筑波大学） "Title:TBA" 4-1 大島 永康 (産総研) "Overview of theme 4: Positron Annihilation Spectroscopy based Research for the

SIP-IMASM project" 4-2 上殿 明良 (筑波大学) " Vacancy-Type Defects and Open Spaces in Solid-State Materials Probed by

Means of Positron Annihilation" 4-3 和田 健 (高エネ研) "Performance Test of a Pulse Stretch System for Material Sciences at KEK Slow

Positron Facility" 4-4 ORourke Brian（産総研）“The AIST High-Intensity, Slow Positron Facility” 4-5 Lixian Jiang（産総研） “Investigation of near Surface Defects Induced by Electrical Discharge Machining

in Steel by Positron Annihilation Spectroscopy” 4-6 原田 祥久（産総研） “Life Prediction based on Damage for Stainless Steel” 4-7 石橋 章司（産総研） “Two-Component Density Functional Study of Positron-monovacancy Interaction

in Metals” 4-8 高津 周平（筑波大学）“Evaluation of Damage by Laser Cutting Process in CFRP” 4-9 仲間 元（筑波大学） “Faliure and Damage Evaluation of Laser-joint in CFRP-Stainless Steel”