six week software training ppt at tcc ludhiana

SIX WEEK SOFTWARE TRAININGAT

TESTING & CONSULTANCY CELL GNDEC, LUDHIANA

Gurjant Singh

Reg No.1288867

Baba Isher Singh College Of Engg.& Tech. Gagra ,Moga

BIS COLLEGE OF ENGG.TECH.GAGRA,MOGA

Features of STADD PRO

"Concurrent Engineering" based user environment for model development, analysis, design, visualization and verification.Object-oriented intuitive 2D/3D graphic model generation.Pull down menus, floating toolbars, and tool tip help.Flexible Zoom and multiple views.Isometric and perspective views 3D shapes.Built-in Command File Editor.Simple Command Language.Graphics/Text input generation.


State-of-the-art Graphical Pre and Post Processor.Rectangular/Cylindrical Coordinate Systems.Joint, Member/Element, Mesh Generation with flexible user-

controlled numbering.Efficient algorithm minimizes disk space requirements.FPS, Metric or SI units.Presentation quality printer plots of Geometry and Results as

part of run output.Compatible with Win95/98/NTOn-line manual and context sensitive help


Graphics Environment

A) Model GenerationInteractive Menu-driven Model Generation with simultaneous 3D

display.2Dand 3D Graphic Generation using rectangular or polar coordinate

systems.Generate Copy, Repeat, Mirror, Pivot, etc. or quick and easy

geometry generation.Quick/easy mesh generation.Comprehensive graphics editing.


Graphical Specification and Display of Properties, Loadings, Supports, Orientations.

Import AutoCAD DXF files.Access to Text Editor.

B) Model Verification2D/3D drawings on screen as well as on plotter/printer.Sectional views or views with listed members only.Isometric or any rotations for full 3D viewing.Display of Properties, Loadings, Supports, Orientations, Joint/Member

numbering, Dimensions, Hidden line removed, etc.Plot manipulation according to the size, rotation, viewing origin and

distance.


Analysis & Design:

• A) Static Analysis• 2D/3D Analysis based on state-of-the-art Matrix method to handle

extremely large job.• Beam, Truss, Tapered Beam, Shell/Plate Bending/Plane Stress.• Full/Partial Moment Releases.• Member Offset Specification.• Fixed, Pinned and Spring Supports with Releases. Also inclined

Supports.• Automatic Spring Support Generator.• Active/Inactive Members for Load-Dependent structures.• Tension-only members and compression-only members, Multi-linear

spring supports.


B) Dynamic / Seismic AnalysisMass modeling, Extraction of Frequency and Mode shapes.Response Spectrum, Time History Analysis.Modal Damping Ratio for Individual Models.Harmonic Load Generator.Combination of Dynamic forces with Static loading for

subsequent design.


Design of different material

A) Concrete Design:Design of Concrete Beam/Column/Slab/Footing as per all major

international codesNumerical and Graphical Design Outputs with complete reinforcement

details.RC detailer as per IS 456-2000 has been implemented which has given a

new dimension to RCC design never witnessed in STAAD before.


B) Steel Design:Built-in steel tables including AISC, Australian, British,

Canadian, Chinese, European, Indian, Japanese, Korean, Russian, and South African. Shapes include I-Beam with or without cover plates, Channels, Angles, Double Angles,/Channels, Pipes and Tubes.

User-specified Design Parameters to customize design.Code Check, Member selection and Optimised Member

Selection consisting of Analysis/Design cycles.


First Staad Screen


New Project


SpaceA SPACE structure, which is a three-dimensional framed structure with

loads applied in any plane, is the most general.

PlaneA PLANE structure is bound by a global X-Y coordinate system with loads

in the same plane.

Floor PlaneA FLOOR structure is a two or three dimensional structure having no

horizontal (global X or Z) movement of the structure [FX, FZ & MY are restrained at every joint]. The floor framing (in global X-Z plane) of a building is an ideal example of a FLOOR structure. Columns can also be modeled with the floor in a FLOOR.

TrussA TRUSS structure consists of truss members which can have only axial

member forces and no bending in the members.


Add Beam


Grid Screen


Add Beam


Assign Section Properties


Section Properties Assigned


Supports


Loads


Live Load



Analysis

Design


Analysis & Post Processing


3d Rendering


Report


Major Projects

Monte Carlo Mall at Sherpur Chowk ,Ludhiana


Design of RCC Structure Monte Carlo Mall.

• This is a RCC structure which is given by consultancy for checking the Factor against Safety (i.e. Sizes and Steel Quantity). We have prepared a RCC modal on STADD Pro with the help of Architecture Drawing with the following specifications as below: -

• Type of building: Commercial Buildings • Number of storey: G+5• Floor height: • Two basement- 4.00m• Ground Floor-5.00m• 1st,2nd,3rd & 4th story-4.65m• Concrete grade: M25• Reinforcement grade: Fe500


Size of Beam:


• Live load on each floor: 4.00 KN/m2

• Seismic Definition: • Zone : IV


Dead Load

Load Combination


Steps:-

Make model in staad pro from Architecture drawingsGive all the section properties of column & beams from Structure drawingsAssign the SupportsAssign all type of loads like Earthquake load,Dead load,Live load,Wind loadAnalyse the modelConcrete design of model According to IS 13920Analyse the modelError detection if anyGo to post processing modeTake the values of all rections bending moment,shear force,displacement etcMake a report.


Staad Pro Main Screen


Make a Model Using Run Structure Wizard


Assign properties


Loads


Wind load X+ Direction


Floor Load


Self Weight


Analysis of Structure


Go To Post Processing Reactions


3d Rendering


Mind Plus Hospital Village Raul Doraha,LudhianaBlock A


Block B


Open Scad

Open scad is a software for creating solid 3d objec cad objects. It is a free software & available for Windows,linux,unix & mac.

Shapes

There are only three basic 3D shapes you start with,and from these ,you can make most any other shapes. These are the • Cube• Sphere• Cylinder


Cube


Sphere


Cylinder


Transformation

TranslateRotationScalingMirroring

CSG operations(Constructive Solid Geometry)UnionDifferenceIntersection


Project

Design A slab


Auto Cad


Contours By Using Grass Software


Daily Dairy Report In Wordpress.BIS COLLEGE OF ENGG.TECH.GAGRA,MOGA


Thank You

Any Query?


six week software training ppt at tcc ludhiana

Engineering

moga bis college of

analysis design

concrete design

d graphic generation

subsequent design

rcc design

static analysis 2d3d

graphical design outputs