size 11” x 8.5” (wxh) seismic hazard region map › wp-content › uploads › 2015 › ... ·...
TRANSCRIPT
Idaho
Washington
Montana
Oregon
California
Colorado
Iowa
Michigan
Minnesota
Nebraska
Nevada
North Dakota
South Dakota
Utah
Wisconsin
Wyoming
Alabama
Arkansas
Florida
Georgia
Kentucky
Louisiana
Mississ ippi
Missouri
North Carol ina
South Carol ina
Tennessee
Arizona
Kansas
New Mexico
Oklahoma
Texas
DelawareIl l inois
Indiana
Maryland
New JerseyOhio
Pennsylvania
Virginia
WestVirginia
Connecticut
Maine
Massachusetts
New Hampshire
New York
Rhode Island
Vermont
Olympia
Bend
Helena
Boise
Rexburg
Seattle
Spokane
Portland
Columbia
Charleston
Jackson
St. Louis
Louisville
Kansas City Springfield
Chicago
Little Rock
Cheyenne
Salt Lake City
St. GeorgeLas Vegas
Los Angeles
San Diego
San Francisco
SacramentoReno
Ogden
Nashville
MemphisJonesboro
Knoxville
Bozeman
Seismic Hazard Region Map
This map is an initial screening aid, with city location markers and hazard region boundaries that are approximate. The Seller/Servicer must obtain a Peak Ground Acceleration calculationperformed using the United States Geological Survey application at http://geohazards.usgs.gov/deaggint/2008/ for any property that may be located in an Elevated Seismic Hazard Region (the highlighted portions of the map), Alaska, Hawaii, or any US territory.
For more information about AEI Consultants or seismic inspections in your area please call: 1.800.801.3224 | aeiconsultants.com
PRINT TEMPLATEProduct FLYERSize 11” x 8.5” (WxH)
How to Use this Template Step by Step go to this FAQhttp://www.printpapa.com/faq/?f=448
SAFE AREA - Keep all textwithin this line.
BORDER THICKNESS - Must be atleast 3/8” from the bleedline to insure your border won’tbe cut off when printed.
FINISHED SIZE - This is wherethe product will be cut to size.
BLEEDS - Create a 1/8 inch bleed area to make sure that theink goes to the edge of the
graphics to the edge of template.