size and performance summary glazing performance grille … · 2020. 4. 20. · pella 2020...

20
Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-1 350 Series Sliding Patio Door The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.

Upload: others

Post on 13-Oct-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-1

350 Series Sliding Patio Door

Size and Performance Summary

Glazing Performance

Grille Profiles and Patterns

Size Tables

Design Data

Detailed Product Description

Cross Sections

The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.

Page 2: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-2

350 Series Sliding Patio Door

Sizes

Standard Sizes 1 S

Special Sizes Available Built on 1/8" Increments O

Frames

Nail Fin - 1-3/8" setback for 4-9/16" Wall Depth S

Nail Fin - 1" setback for 4-15/16" Wall Depth S

Block Frame - 6" Frame Depth S

Double-Wall Flush Flange - 5-1/2" Wall Depth O

Performance 2Meets or Exceeds AAMA/WDMA Ratings LC35 - LC50

Air Infiltration 3(cfm/ft2 of frame @ 1.57 psf wind pressure)

0.14

Design Pressure 35 - 50

Water Resistance 7.5 psf

Forced Entry 4 10

Maximum Operating Force (lb)

(Initiate Motion / Maintain Motion)25/13

S = Standard; O = Optional; (—) = Not Available

(1) See size charts in this section for available sizes.

(2) Published performance data is for single unit only. Pella® 350 Series Patio Doors do not have mulling capabilities. All products must be installed in separate openings.

(3) Published performance Data for air infiltration is determined by testing a minimum of four (4) products of NFRC model size. Testing is conducted in accordance with ASTM E283. Air infiltration ratings for products will differ by size. The performance data does not apply to combination assemblies unless notes. Actual product performance may vary for a number of reasons including installation and product care.

(4) The higher the level, the greater the product's ability to resist forced entry.

(5) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration.

The presence of low-E or argon have negligible effect on sound attenuation characteristics.

Performance with additional options may not be the same as Standard and Special size units. Please contact your local Pella representative for complete information.

Size and Performance Data

Sound Transmission Class / Outdoor-Indoor Transmission Class

Frame Size Tested 5

Glazing SystemSTC

RatingOITC

RatingOverall Glazing Thickness

Exterior Glass Thickness

Interior Glass Thickness

Third Pane Thickness

Sliding Door - Dual-Pane Insulating Glass

71-3/8" x 81-1/2" 1" 3 mm 3 mm — 29 23

71-3/8" x 81-1/2" 1" 3 mm 5 mm — 33 26

Sliding Door – Triple-Pane Insulating Glass

71-3/8" x 81-1/2" 1-3/8" 3 mm 3 mm 3 mm 32 26

Rev. 04/20/20

Page 3: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-3

350 Series Sliding Patio Door

S = Standard; O = Optional

(1) Not available with triple-pane glazing.

(2) Contact your local Pella sales representative for current offering.

(3) Available on doors with white, brown or almond exteriors only.

Glazing

Glazing Type

Dual-pane insulating glass S

Triple-pane insulating glass O

Insulated Glass Options / Low-E Types

Advanced Low-E S

NaturalSun Low-E O

SunDefense™ Low-E 1 O

Gray Low-E 1 O

Bronze-tinted Advanced Low-E 1 O

Additional Glazing Options

Tempered Glass S

Obscure Glass 2 O

Low-E insulating glass with Blinds-Between-The- Glass or Shades-Between-The-Glass O

Noise reduction glass (STC 3 mm / 5 mm combination) 1 O

Gas Fi l l / High Alt i tude

Argon S

High altitude O

High altitude with argon 1 O

Interior / Exterior Color

White Interior/White Exterior S

Almond Interior/Almond Exterior O

White Interior/Brown Exterior O

White Interior/Fossil Exterior O

White Interior/Black Exterior O

White Interior/Brick Red Exterior O

White Interior/Hartford Green Exterior O

White Interior/Morning Sky Gray Exterior O

White Interior/Poplar White Exterior O

White Interior/Portobello Exterior O

White Interior/Tan Exterior O

Features and Options

Grilles-Between-the-GlassGri l le Profi les3/4" Contour O1" Contour O

Gril le PatternsTraditional O9-Lite Prairie O6-Lite Prairie OTop Row OCustom — Equally Divided O

Blinds-Between-the-Glass (Select Sizes Only)White O

Shades-Between-the-Glass (Select Sizes Only)Linen Cellular O

ScreenNo Screen OConventional Fiberglass Sliding Screen SRolscreen® Retractable Screen 3 O

Door Handle Finishes

Color matched to frame S

Additional Interior Finishes (Bright Brass, Satin Nickel, Oil-Rubbed Bronze) O

Keyed Lock S

Page 4: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-4

350 Series Sliding Patio DoorG

lass

Th

ickn

ess

Type of Glazing NFRC Certified Product #

Glass (mm)

Gap Fill

Performance Values 1

Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown

Ext. Int.

U-F

acto

r

SHG

C

VLT CR

U. S. Canada 2

Zone ER Zone

1"and 1-3/8" Dual-Pane Insulating glass N NC SC S CA

1" Advanced Low-E IG with between-the-glass Options

Blinds Open PEL-N-161-01175-00001 3 3 Air 0.37 0.26 0.47 49

1-3/8" Advanced Low-E IG with between-the-glass Options

Shade Fully Open PEL-N-161-01179-00001 3 3 Air 0.35 0.26 0.47 50

1" Advanced Low-E IG PEL-N-161-01040-00001 3 3 Air 0.34 0.27 0.51 56 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01040-00002 0.34 0.24 0.45 56

1" Advanced Low-E IG PEL-N-161-01041-00001 3 3 Argon 0.30 0.27 0.51 59 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01041-00002 0.30 0.24 0.45 59 N NC SC S

1" Advanced Low-E IG PEL-N-161-01060-00001 5 5 Air 0.33 0.27 0.50 55 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01060-00002 0.33 0.24 0.44 55

1" Advanced Low-E IG PEL-N-161-01061-00001 5 5 Argon 0.30 0.27 0.50 58 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01061-00002 0.30 0.24 0.44 58 N NC SC S

1" NaturalSun Low-E IG PEL-N-161-01036-00001 3 3 Air 0.34 0.48 0.58 55 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01036-00002 0.34 0.42 0.51 55

1" NaturalSun Low-E IG PEL-N-161-01037-00001 3 3 Argon 0.31 0.48 0.58 59 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01037-00002 0.31 0.42 0.51 59

1" NaturalSun Low-E IG PEL-N-161-01056-00001 5 5 Air 0.34 0.46 0.57 55 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01056-00002 0.34 0.40 0.50 55

1" NaturalSun Low-E IG PEL-N-161-01057-00001 5 5 Argon 0.31 0.46 0.57 58 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01057-00002 0.31 0.40 0.50 58

1" SunDefense™ Low-E IG PEL-N-161-01042-00001 3 3 Air 0.33 0.21 0.47 56 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01042-00002 0.33 0.18 0.41 56

1" SunDefense™ Low-E IG PEL-N-161-01043-00001 3 3 Argon 0.30 0.20 0.47 60 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01043-00002 0.30 0.18 0.41 60 N NC SC S

1" SunDefense™ Low-E IG PEL-N-161-01062-00001 5 5 Air 0.33 0.21 0.47 56 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01062-00002 0.33 0.18 0.41 56

1" SunDefense™ Low-E IG PEL-N-161-01063-00001 5 5 Argon 0.29 0.20 0.47 59 N NC SC S

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01063-00002 0.29 0.18 0.41 59 N NC SC S

Glazing Performance - Total Unit

(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria.

(2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative.

Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.

See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating

Climate Zones

CA

Page 5: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-5

350 Series Sliding Patio DoorG

lass

Th

ickn

ess

Type of Glazing NFRC Certified Product #

Glass (mm)

Gap Fill

Performance Values 1

Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown

Ext. Int.

U-F

acto

r

SHG

C

VLT CR

U. S. Canada 2

Zone ER Zone

1" and 1-3/8" Dual-Pane Insulating glass - Door Panels — with Foam Insulation N NC SC S CA

1" Advanced Low-E IG with between-the-glass Options

Blinds Open PEL-N-161-01177-00001 3 3 Air 0.36 0.26 0.47 50

1-3/8" Advanced Low-E IG with between-the-glass Options

Shade Fully Open PEL-N-161-01181-00001 3 3 Air 0.36 0.26 0.47 50

1" Advanced Low-E IG PEL-N-161-01100-00001 3 3 Air 0.33 0.27 0.51 56 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01100-00002 0.33 0.24 0.45 56

1" Advanced Low-E IG PEL-N-161-01101-00001 3 3 Argon 0.29 0.27 0.51 59 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01101-00002 0.29 0.24 0.45 59 N NC SC S

1" Advanced Low-E IG PEL-N-161-01120-00001 5 5 Air 0.32 0.27 0.50 55 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01120-00002 0.32 0.24 0.44 55

1" Advanced Low-E IG PEL-N-161-01121-00001 5 5 Argon 0.29 0.27 0.50 59 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01121-00002 0.29 0.24 0.44 59 N NC SC S

1" NaturalSun Low-E IG PEL-N-161-01096-00001 3 3 Air 0.33 0.48 0.58 55 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01096-00002 0.33 0.42 0.51 55

1" NaturalSun Low-E IG PEL-N-161-01097-00001 3 3 Argon 0.30 0.48 0.58 59 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01097-00002 0.30 0.42 0.51 59

1" NaturalSun Low-E IG PEL-N-161-01116-00001 5 5 Air 0.33 0.46 0.57 55 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01116-00002 0.33 0.40 0.50 55

1" NaturalSun Low-E IG PEL-N-161-01117-00001 5 5 Argon 0.30 0.46 0.57 58 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01117-00002 0.30 0.40 0.50 58 N NC

1" SunDefense™ Low-E IG PEL-N-161-01102-00001 3 3 Air 0.32 0.21 0.47 56 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01102-00002 0.32 0.18 0.41 56

1" SunDefense™ Low-E IG PEL-N-161-01103-00001 3 3 Argon 0.29 0.20 0.47 60 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01103-00002 0.29 0.18 0.41 60 N NC SC S

1" SunDefense™ Low-E IG PEL-N-161-01122-00001 5 5 Air 0.32 0.21 0.47 56 with 3/4" or 1" grilles-between-the-glass PEL-N-161-01122-00002 0.32 0.18 0.41 56

1" SunDefense™ Low-E IG PEL-N-161-01123-00001 5 5 Argon 0.28 0.20 0.47 59 N NC SC S

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01123-00002 0.28 0.18 0.41 59 N NC SC S

Glazing Performance - Total Unit

(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria.

(2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative.

Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.

See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating

Climate Zones

CA

Page 6: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-6

350 Series Sliding Patio DoorG

lass

Th

ickn

ess

Type of Glazing NFRC Certified Product #

Glass (mm)

Gap Fill

Performance Values 1

Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown

Ext. Int.

U-F

acto

r

SHG

C

VLT CR

U. S. Canada 2

Zone ER

1" Dual-Pane Tinted Insulating Glass N NC SC S CA1" Bronze Advanced Low-E IG PEL-N-161-01045-00001 3 3 Argon 0.30 0.27 0.39 60 N NC

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01045-00002 0.30 0.24 0.34 60 N NC SC S

1" Bronze Advanced Low-E IG PEL-N-161-01065-00001 5 5 Argon 0.30 0.24 0.33 59 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01065-00002 0.30 0.21 0.28 59 N NC SC S

1" Gray Low-E IG PEL-N-161-01047-00001 3 3 Argon 0.30 0.26 0.35 60 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01047-00002 0.30 0.23 0.31 60 N NC SC S

1" Gray Low-E IG PEL-N-161-01067-00001 5 5 Argon 0.30 0.22 0.28 59 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01067-00002 0.30 0.19 0.25 59 N NC SC S

1" Dual-Pane Tinted Insulating Glass — with Foam Inserts1" Bronze Advanced Low-E IG PEL-N-161-01105-00001 3 3 Argon 0.29 0.27 0.39 60 N NC

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01105-00002 0.29 0.24 0.34 60 N NC SC S

1" Bronze Advanced Low-E IG PEL-N-161-01125-00001 5 5 Argon 0.29 0.24 0.33 59 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01125-00002 0.29 0.21 0.28 59 N NC SC S

1" Gray Low-E IG PEL-N-161-01107-00001 3 3 Argon 0.29 0.26 0.35 60 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01107-00002 0.29 0.23 0.31 60 N NC SC S

1" Gray Low-E IG PEL-N-161-01127-00001 5 5 Argon 0.29 0.22 0.28 59 N NC SC S

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01127-00002 0.29 0.19 0.25 59 N NC SC S

Glazing Performance - Total Unit

(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria.

(2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative.

Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.

See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating

Climate Zones

CA

Page 7: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-7

350 Series Sliding Patio DoorG

lass

Th

ickn

ess

Type of Glazing NFRC Certified Product #

Glass (mm)

Gap Fill

Performance Values 1

Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown

Ext

.

Mid

.

Int.

U-F

acto

r

SHG

C

VLT CR

U. S. Canada 2

Zone ER Zone

1-3/8" Triple-Pane Insulating glass N NC SC S CA1-3/8" Advanced Low-E IG PEL-N-161-01052-00001 3 3 3 Air 0.22 0.23 0.40 61 N NC SC S

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01052-00002 0.22 0.21 0.35 61 N NC SC S

1-3/8" Advanced Low-E IG PEL-N-161-01053-00001 3 3 3 Argon 0.20 0.23 0.40 62 N NC SC S 27 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01053-00002 0.20 0.21 0.35 62 N NC SC S 26 CA

1-3/8" Advanced Low-E IG PEL-N-161-01076-00001 5 5 5 Air 0.25 0.23 0.39 61 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01077-00001 0.25 0.20 0.34 61 N NC SC S

1-3/8" Advanced Low-E IG PEL-N-161-01078-00001 5 5 5 Argon 0.22 0.23 0.39 61 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01079-00001 0.22 0.20 0.34 61 N NC SC S

1-3/8" NaturalSun Low-E IG PEL-N-161-01050-00001 3 3 3 Air 0.23 0.41 0.51 61 34 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01050-00002 0.23 0.36 0.44 61 N NC

1-3/8" NaturalSun Low-E IG PEL-N-161-01051-00001 3 3 3 Argon 0.21 0.41 0.51 62 36 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01051-00002 0.21 0.36 0.44 62 N NC 34 CA

1-3/8" NaturalSun Low-E IG PEL-N-161-01072-00001 5 5 5 Air 0.25 0.39 0.50 61 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01073-00001 0.26 0.35 0.43 61 N NC

1-3/8" NaturalSun Low-E IG PEL-N-161-01074-00001 5 5 5 Argon 0.22 0.39 0.50 61 N NC 34 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01075-00001 0.23 0.35 0.43 61 N NC

Door Panels — with Foam Insulation1-3/8" Advanced Low-E IG PEL-N-161-01112-00001 3 3 3 Air 0.21 0.23 0.40 63 N NC SC S 26 CA

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01112-00002 0.21 0.21 0.35 63 N NC SC S 25 CA

1-3/8" Advanced Low-E IG PEL-N-161-01113-00001 3 3 3 Argon 0.19 0.23 0.40 64 N NC SC S 28 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01113-00002 0.19 0.21 0.35 64 N NC SC S 27 CA

1-3/8" Advanced Low-E IG PEL-N-161-01136-00001 5 5 5 Air 0.24 0.23 0.39 62 N NC SC S with 3/4" or 1" grilles-between-the-glass PEL-N-161-01137-00001 0.25 0.20 0.34 62 N NC SC S

1-3/8" Advanced Low-E IG PEL-N-161-01138-00001 5 5 5 Argon 0.21 0.23 0.39 63 N NC SC S 26 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01139-00001 0.21 0.20 0.34 63 N NC SC S 24 CA

1-3/8" NaturalSun Low-E IG PEL-N-161-01110-00001 3 3 3 Air 0.22 0.41 0.51 63 35 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01110-00002 0.22 0.36 0.44 63 N NC

1-3/8" NaturalSun Low-E IG PEL-N-161-01111-00001 3 3 3 Argon 0.20 0.41 0.51 64 38 CA with 3/4" or 1" grilles-between-the-glass PEL-N-161-01111-00002 0.20 0.36 0.44 64 N NC 35 CA

1-3/8" NaturalSun Low-E IG PEL-N-161-01132-00001 5 5 5 Air 0.24 0.39 0.50 62 N NC with 3/4" or 1" grilles-between-the-glass PEL-N-161-01133-00001 0.25 0.35 0.43 62 N NC

1-3/8" NaturalSun Low-E IG PEL-N-161-01134-00001 5 5 5 Argon 0.22 0.39 0.50 63 N NC 34 CA

with 3/4" or 1" grilles-between-the-glass PEL-N-161-01135-00001 0.22 0.35 0.43 63 N NC

Glazing Performance - Total Unit

(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria.

(2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative.

Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.

See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating

Climate Zones

CA

Page 8: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-8

350 Series Sliding Patio Door

1"3/4"

1" Contour3/4" Contour1" Contour

1"

3/4" Contour

3/4"

Grille Profiles Grilles-Between-the-Glass

For traditional patterns, see size tables.

Grilles

6-Lite Prairie 9-Lite Prairie

6-Lite Prairie

- Approximately 6" from edge of panel to center of bar.

9-Lite Prairie

- Approximately 6" from edge of panel to center of bar.

Grille Patterns

Traditional

- Specify number of lites in each panel—wide and high.

- Grille bars must be equally divided on visible glass.

- Minimum 6" x 6" center-to-center.

Top Row

- Top Row dimension must be ≤1/2 actual glass.

Traditional Top Row Custom — Equally Divided

Rev. 08/12/20

Page 9: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-9

350 Series Sliding Patio Door

(1) "X" indicates venting or sliding panel and "O" indicates fixed panel as viewed from the exterior. Doors shown as XO are also available as OX.

Combinations require reinforcing mullions between units.

All doors, transoms and sidelights are glazed with tempered glass.

Available with Blinds-Between-The-Glass or Shades-Between-The-Glass.7-0/8 0

7-0/6-10

7-0/6-8

7-0/2-0

5-0/8 0 8-0/8-06-0/8 0

5-0/6-10 8-0/6-106-0/6-10

5-0/6-8 8-0/6-86-0/6-8

2-9/8-0

2-9/6-10

2-9/6-8

2-9/6-7

2-6/8-0 3-3/8-0 4-0/8-03-0/8-0

2-6/6-10 3-3/6-10 4-0/6-103-0/6-10

2-6/6-8 3-3/6-8 4-0/6-83-0/6-8

2-6/6-7 3-3/6-7 4-0/6-73-0/6-7

5-0/2-0 8-0/2-07-6/2-06-0/2-0

"/ 21

(2 0

19)

(2 0

32)

796' 8

""

/ 21(2

070

)

(2 0

83)

816' 1

0""

/ 21(2

426

)

(2 4

38)

958' 0

"

(2 134)(2 121)

"/ 21837' 0"

(2 134)(2 121)

"/ 21837' 0"Opening

Frame

Transoms

OpeningFrame

"163 /"163 /

"/ 21

"/ 21

"/ 21

(2 4

26)

(2 4

38)

958' 0

"(2

070

)

(2 0

83)

816' 1

0"(2

019

)

(2 0

32)

796' 8

"

1

"/ 21958' 0"

(2 438)(2 426)

"/ 21"/ 21

2-Panel (XO ) (1 524)

5' 0"59

(1 511)

716' 0"

(1 829)(1 816)

"16/11322' 9

(843)(830)

"16/11

"16/

11

"16

3/

"/ 21474' 0"

(1 219)(1 207)

383' 3

(995)(983)

"/ 21"/ 21

(2 0

11)

(2 0

24)

796' 7

Sidelights

OpeningFrame

(762)

2' 6"29

(749)

353' 0"

(914)(902)

"/ 21

"/ 21958' 0"

(2 438)(2 426)

"/ 21897' 6"

(2 286)(2 273)

"/ 21"/ 21

(597

)

(610

)

232' 0

"

(1 524)

5' 0"59

(1 511)

716' 0"

(1 829)(1 816)

Size Tables

Page 10: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-10

350 Series Sliding Patio Door

9-11/8-0

9-11/6-10

9-11/6-8

12-0/8-0

12-0/6-10

12-0/6-8

11-11/8-010-0/8-0

11-11/6-1010-0/6-10

11-11/6-810-0/6-8

7-8/8-0

7-8/6-10

7-8/6-8

12-0/8-0

12-0/6-10

12-0/6-8

7-6/8-0 9-2/8-09-0/8-0

7-6/6-10 9-2/6-109-0/6-10

7-6/6-8 9-2/6-89-0/6-8

"/ 21

(2 4

26)

(2 4

38)

958' 0

""

/ 21(2

426

)

(2 4

38)

958' 0

""

/ 21(2

070

)

(2 0

83)

816' 1

0""

/ 21(2

070

)

(2 0

83)

816' 1

0""

/ 21(2

019

)

(2 0

32)

796' 8

""

/ 21(2

019

)

(2 0

32)

796' 8

"

OpeningFrame

"1/ 8

"8/51189' 11

(3 026)(3 013)

"8/5

"1/ 8

"/ 21 "/ 2114211' 11

(3 635)(3 623)

14312' 0"

(3 658)(3 645)

4-Panel (OXXO)

OpeningFrame 119

10' 0"

(3 048)(3 035)

"16/5

"16/13

(2 345)

7' 891

(2 332)

"/ 21 "/ 21

"16/5

"16/131099' 2

(2 802)(2 789)

14312' 0"

(3 658)(3 645)

"/ 21

3-Panel (OXO) (2 286)

7' 6"89

(2 273)

1079' 0"

(2 743)(2 731)

Combinations require reinforcing mullions between units.

All doors and sidelights are glazed with tempered glass.

Available with Blinds-Between-The-Glass or Shades-Between-The-Glass.

Size Tables

Page 11: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-11

350 Series Sliding Patio Door

Blinds-Between-the-Glass and Shades-Between-the-Glass are available in select door and sidelight sizes only.

To convert areas to square meters (m2), multiply square feet by 0.0929.

Doors

MINIMUM46-1/2" W x 70-1/2" H

(1 181 x 1 791)

MAXIMUM95-1/2" W x 100" H

(2 426 x 2 540)

MINIMUM71-1/2" W x 70-1/2" H

(1 816 x 1 791)

MAXIMUM143-1/2" W x 100" H

(3 645 x 2 540)

MINIMUM95-1/2" W x 70-1/2" H

(2 426 x 1 791)

MAXIMUM143-1/2" W x 100" H

(3 645 x 2 540)

Sidelights Transoms

MINIMUM18-1/8" W x 70-1/2" H

(460 x 1 791)

MAXIMUM47-1/2" W x 100" H

(1 207 x 2 540)

MINIMUM46-1/2" W x 18-1/8" H

(1 181 x 460)

MAXIMUM100" W x 47-1/2" H

(2 731 x 1 207)

General Notes:

• Special sizes are available within the parameters shown on 1/8" increments.• FH = RO - 0.5"; FW = RO - 0.5"

Transoms / Sidelights

Panel

Panel Height = FH - 2.312"

Panel Width = FW - 2.312"

Actual Glass

Glass Height = FH -7.812"

Glass Width = FW -7.812"

Visible Glass

VG Height = FH - 9.437"

VG Width = FW - 9.437"

Clear Opening Not Applicable

Miscellaneous Formulas

Doors

Panel

Panel Height = FH - 2.625"

XO / OX Panel Width = FW÷2 - 2.625"

OXO Panel Width = FW÷3 - 0.25"

OXXO Panel Width = FW÷4 + .719"

Actual Glass

Glass Height = FH - 8.125"

XO / OX Glass Width = FW÷2 - 4.875"

OXO Glass Width = FW÷3 - 5.729"

OXXO Glass Width = FW÷4 - 4.781"

Visible Glass

VG Height = FH - 9.75"

XO / OX VG Width = FW÷2 - 6.5"

OXO VG Width = FW÷3 - 7.354"

OXXO VG Width = FW÷4 - 6.406"

Clear Opening

Height = FH - 3.75"

XO / OX Clear Opening Width = FW÷2 - 8.625"

OXO Clear Opening Width = FW÷3 - 9.481"

OXXO Clear Opening Width = FW÷2 - 21.472"

Special Size and Dimensions

Page 12: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-12

350 Series Sliding Patio Door

(—) = Not Available

(1) Maximum performance when glazed with the appropriate glass thickness. Second number where shown requires performance upgrade and installation of sill riser.

To convert areas to square meters (m²), multiply square feet by 0.0929.

Pella® 350 Series Sliding Patio Door

Call Out

Frame Clear Opening Vent Area Ft2

Total Unit Visible Glass

Area Ft2

Standard Glass Thickness (mm) Performance

Class & Grade 1Width (Inches)

Height (Inches)

Width (Inches)

Height (Inches)

Annealed Tempered

XO/OX Venting Units

5-0/6-8 59-1/2 79-1/2 21-1/8 75-3/4 11.1 22.5 — 3 LC35/LC50

6-0/6-8 71-1/2 79-1/2 27-1/8 75-3/4 14.3 28.3 — 3 LC35/LC50

7-0/6-8 83-1/2 79-1/2 33-1/8 75-3/4 17.4 34.1 — 3 LC35/LC50

8-0/6-8 95-1/2 79-1/2 39-1/8 75-3/4 20.6 40.0 — 3 LC35/LC50

5-0/6-10 59-1/2 81-1/2 21-1/8 77-3/4 11.4 23.2 — 3 LC35/LC50

6-0/6-10 71-1/2 81-1/2 27-1/8 77-3/4 14.6 29.1 — 3 LC35/LC50

7-0/6-10 83-1/2 81-1/2 33-1/8 77-3/4 17.9 35.1 — 3 LC35/LC50

8-0/6-10 95-1/2 81-1/2 39-1/8 77-3/4 21.1 41.1 — 3 LC35/LC50

5-0/8-0 59-1/2 95-1/2 21-1/8 91-3/4 13.5 27.7 — 3 LC35/LC50

6-0/8-0 71-1/2 95-1/2 27-1/8 91-3/4 17.3 34.8 — 3 LC35/LC50

7-0/8-0 83-1/2 95-1/2 33-1/8 91-3/4 21.1 42.0 — 3 LC35/LC50

8-0/8-0 95-1/2 95-1/2 39-1/8 91-3/4 24.9 49.1 — 5 LC35/LC50

OXO Venting Units

7-6/6-8 89-1/2 79-1/2 20-3/8 75-3/4 10.7 32.7 — 3 LC35/LC50

7-8/6-8 91-13/16 79-1/2 21-1/8 75-3/4 11.1 33.8 — 3 LC35/LC50

9-0/6-8 107-1/2 79-1/2 26-3/8 75-3/4 13.9 41.4 — 3 LC35/LC50

9-2/6-8 109-13/16 79-1/2 27-1/8 75-3/4 14.3 42.5 — 3 LC35/LC50

12-0/6-8 143-1/2 79-1/2 38-3/8 75-3/4 20.2 58.8 — 3 LC35/LC50

7-6/6-10 89-1/2 81-1/2 20-3/8 77-3/4 11.0 33.6 — 3 LC35/LC50

7-8/6-10 91-13/16 81-1/2 21-1/8 77-3/4 11.4 34.8 — 3 LC35/LC50

9-0/6-10 107-1/2 81-1/2 26-3/8 77-3/4 14.2 42.6 — 3 LC35/LC50

9-2/6-10 109-13/16 81-1/2 27-1/8 77-3/4 14.6 43.7 — 3 LC35/LC50

12-0/6-10 143-1/2 81-1/2 38-3/8 77-3/4 20.7 60.5 — 3 LC35/LC50

7-6/8-0 89-1/2 95-1/2 20-3/8 91-3/4 13.0 40.2 — 3 LC35/LC50

7-8/8-0 91-13/16 95-1/2 21-1/8 91-3/4 13.5 41.5 — 3 LC35/LC50

9-0/8-0 107-1/2 95-1/2 26-3/8 91-3/4 16.8 50.9 — 3 LC35/LC50

9-2/8-0 109-13/16 95-1/2 27-1/8 91-3/4 17.3 52.3 — 3 LC35/LC50

12-0/8-0 143-1/2 95-1/2 38-3/8 91-3/4 24.4 72.3 — 5 LC35/LC50

OXXO Venting Units

9-11/6-8 118-5/8 79-1/2 37-3/4 75-3/4 19.9 51.2 — 3 LC35

10-0/6-8 119-1/2 79-1/2 38-1/4 75-3/4 20.1 51.6 — 3 LC35

11-11/6-8 142-5/8 79-1/2 49-13/16 75-3/4 26.2 62.8 — 3 LC35

12-0/6-8 143-1/2 79-1/2 50-1/4 75-3/4 26.4 63.2 — 3 LC35

9-11/6-10 118-5/8 81-1/2 37-3/4 77-3/4 20.4 52.6 — 3 LC35

10-0/6-10 119-1/2 81-1/2 38-1/4 77-3/4 20.7 53.1 — 3 LC35

11-11/6-10 142-5/8 81-1/2 49-13/16 77-3/4 26.9 64.6 — 3 LC35

12-0/6-10 143-1/2 81-1/2 50-1/4 77-3/4 27.1 65.0 — 3 LC35

9-11/8-0 118-5/8 95-1/2 37-3/4 91-3/4 24.1 62.9 — 3 LC35

10-0/8-0 119-1/2 95-1/2 38-1/4 91-3/4 24.4 63.4 — 3 LC35

11-11/8-0 142-5/8 95-1/2 49-13/16 91-3/4 31.8 77.2 — 3 LC35

12-0/8-0 143-1/2 95-1/2 50-1/4 91-3/4 32.0 77.7 — 3 LC35

Design Data

Rev. 04/14/20

Page 13: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-13

350 Series Sliding Patio Door

(—) = Not Applicable

(1) Maximum performance when glazed with the appropriate glass thickness. Second number where shown requires performance upgrade.

To convert areas to square meters (m²), multiply square feet by 0.0929.

Pella® 350 Series Sliding Patio Door

Call Out

Frame Clear Opening Vent Area Ft2

Total Unit Visible Glass

Area Ft2

Standard Glass Thickness (mm) Performance

Class & Grade 1Width (Inches)

Height (Inches)

Width (Inches)

Height (Inches)

Annealed Tempered

Sidelights

2-6/6-7 29-1/2 79-3/16 — — — 9.7 — 3 LC35/LC50

2-9/6-7 32-11/16 79-3/16 — — — 11.3 — 3 LC35/LC50

3-0/6-7 35-1/2 79-3/16 — — — 12.6 — 3 LC35/LC50

3-3/6-7 38-11/16 79-3/16 — — — 14.2 — 3 LC35/LC50

4-0/6-7 47-1/2 79-3/16 — — — 18.4 — 3 LC35/LC50

2-6/6-8 29-1/2 79-1/2 — — — 9.8 — 3 LC35/LC50

2-9/6-8 32-11/16 79-1/2 — — — 11.3 — 3 LC35/LC50

3-0/6-8 35-1/2 79-1/2 — — — 12.7 — 3 LC35/LC50

3-3/6-8 38-11/16 79-1/2 — — — 14.2 — 3 LC35/LC50

4-0/6-8 47-1/2 79-1/2 — — — 18.5 — 3 LC35/LC50

2-6/6-10 29-1/2 81-1/2 — — — 10.0 — 3 LC35/LC50

2-9/6-10 32-11/16 81-1/2 — — — 11.6 — 3 LC35/LC50

3-0/6-10 34-15/16 81-1/2 — — — 12.8 — 3 LC35/LC50

3-3/6-10 38-11/16 81-1/2 — — — 14.6 — 3 LC35/LC50

4-0/6-10 47-1/2 81-1/2 — — — 19.0 — 3 LC35/LC50

2-6/8-0 29-1/2 95-1/2 — — — 12.0 — 3 LC35/LC50

2-9/8-0 32-11/16 95-1/2 — — — 13.9 — 3 LC35/LC50

3-0/8-0 35-1/2 95-1/2 — — — 15.6 — 3 LC35/LC50

3-3/8-0 38-11/16 95-1/2 — — — 17.5 — 3 LC35/LC50

4-0/8-0 47-1/2 95-1/2 — — — 22.7 — 5 LC35/LC50

Transoms

5-0/2-0 59-1/2 23-1/2 — — — 4.9 3 3 LC35/LC50

6-0/2-0 71-1/2 23-1/2 — — — 6.1 3 3 LC35/LC50

7-6/2-0 89-1/2 23-1/2 — — — 7.8 3 3 LC35/LC50

8-0/2-0 95-1/2 23-1/2 — — — 8.4 3 3 LC35/LC50

Design Data

Rev. 04/14/20

Page 14: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-14

350 Series Sliding Patio Door

Frame • Overall frame depth: 6". • Frame members are mitered and heat fused to provide a fully welded

corner assembly. Sill is fitted with weeps.• Frame: [1-3/8" setback nail fin for 4-9/16" wall depth] [1" setback nail fin

for 4-15/16" wall depth] [Block frame for 4-15/16" wall depth] Double Wall Flush flange for 5-1/2" wall depth].

• Interior and exterior frame surfaces are extruded rigid uPVC.

Door panels• Door Panel consists of extruded rigid uPVC [with optional foam insulation]. • Panel members are mitered and heat-fused to provide a fully welded

corner assembly.• Vent panel is fully operable for ventilation.• Vent panels have two adjustable rollers, set on a stainless steel track cap. • Contains sealed insulating glass.

Weatherstripping• Fin-type pile around perimeter of panels.

Glazing System• Quality fully-tempered float glass complying with ASTM C 1036.• Exterior face-glazed sealed insulating glass. • Dual-Pane insulating glass [Advanced Low-E coated [with argon]]

[NaturalSun Low-E coated [with argon]] [SunDefense™ Low-E coated [with argon]] [Bronze, Advanced Low-E coated [with argon]] [Gray Low-E coated [with argon]] [Obscure 2] [High Altitude 1].

-or-• [1" Dual Pane Low-E insulating glass with Blinds-Between-The-Glass] [1-3/8"

Dual-Pane Low-E insulating glass with Shades-Between-The-Glass].-or-

• Triple-Pane insulating glass [Advanced Low-E coated with argon] [NaturalSun Low-E coated with argon] [Obscure 2] [High Altitude 1].

Interior / Exterior• Frame and panel members are [[White] [Almond] with integral color

extruded throughout the profiles] [[Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan] [Fossil] exterior, consisting of a solar reflective coating exceeding AAMA 613 test requirements, with White integral color extruded throughout the profiles on the interior].

• All exposed PVC surfaces are smooth, glossy and uniform in appearance.

Hardware • Interior handle and thumblock; finish is [White] [Almond] [Bright Brass]

[Satin Nickel] [Oil-Rubbed Bronze].• Exterior handle finish Matches exterior finish.• Keylock with K-keyway cylinder. Finish is [Chrome].• All fasteners are a corrosion-resistant material compatible with PVC.• Multi-point lock, [electroplated steel] [stainless steel].• Door rollers are adjustable, permanently-sealed, [electroplated steel with

organic coated ball-bearing rollers] [corrosion resistant stainless steel, ball bearing rollers].

Screen • Conventional Full-size Fiberglass sliding screen with black vinyl coated

18/14 mesh fiberglass screen cloth complying with ASTM D 3656 and SMA 1201 set in an extruded aluminum frame.

• Supplied with four self-adjustable rollers, latch and latch handle.• Frame of screen matches exterior frame color.

Optional ProductsGrilles• Grilles-Between-the-Glass

� Insulating glass contains [3/4"] [1"] contoured aluminum grilles permanently installed between two panes of glass (exterior air-space on triple-pane insulating glass).

� Patterns are [Traditional] [6-Lite Prairie] [9-Lite Prairie] [Top Row] [Custom–Equally Divided].

� Interior grille color matches interior frame. � Exterior grille color [3/4" Grille is [White] [Almond 3] [Brown] [Black]

[Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan] [Fossil]] [1" Grille is [White] [Almond 3] [Brown]].

Blinds• Blinds-Between-the-Glass - (select sizes only)

� White aluminum blind sealed between dual-pane Low-E insulating glass.

� Cordless tilt, raise and lower operation.Shades• Shades-Between-the-Glass – Linen Cellular (select sizes only)

� Light filtering fabric cellular shades sealed between dual pane Low-E insulating glass.

� Cordless raise and lower operation.Screens• Rolscreen® Retractable Screen 4 (2-, 3-, and 4-panel configurations)

� Self-storing, rolling, black vinyl-coated 18/16 mesh fiberglass screen cloth complying with ASTM D 3656 and SMA 1201 mounted behind cover that matches exterior color.

(1) Dual-Pane IG High Altitude glazing is available with or without Argon. Triple-Pane IG High Altitude glazing is only available without Argon.

(2) Obscure glass not available with Bronze Advanced Low-E.

(3) Almond grilles only available on almond units. Almond units with grilles will have an almond grille color.

(4) Available only on doors with White, Almond or Brown exterior finish.

Detailed Product Description

Page 15: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-15

350 Series Sliding Patio Door

Scale 3" = 1' 0"

Combinations require reinforcing mullions between units.

All dimensions are approximate.

6" OAW

VENT SILLXS FIXED SILLOS

FJ FIXED JAMBLOCK JAMBLJ INTERLOCKERI

VENT HEADXH FIXED HEADOH

Unit Sections - Optional Foam Insulation

Page 16: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-16

350 Series Sliding Patio Door

Scale 3" = 1' 0"

Combinations require reinforcing mullions between units.

All dimensions are approximate.

[57]

2 1/

4"

[33]

1 5/

16"

[90]

3 9/

16"

[142]5 5/8"

[12]1/2"

[48]

1 7/

8"

[47]1 7/8"

[47]1 7/8"

6" OAW

[33]

1 5/

16"

[90]

3 9/

16"

[151]6" OAW

[48]

1 7/

8"[3

8]1

1/2"

[33]

1 5/

16"

[90]

3 9/

16"

[125]4 15/16"

[25]1"

[48]

1 7/

8"[3

8]1

1/2"

[33]

1 5/

16"

[90]

3 9/

16"

[116]4 9/16"

[35]1 3/8"

[48]

1 7/

8"

NEW CONSTRUCTION FRAME GLAZING OPTIONS

REPLACEMENT FRAME DESIGN

DOUBLE WALL FLUSH FLANGE

1" IG

1 3/8" TRIPLE-PANE IG1" FIN SET BACK

BLOCK FRAME

1 3/8" FIN SET BACK

Unit Sections - Frame Types

Page 17: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-17

350 Series Sliding Patio Door

Scale 3" = 1' 0"

Combinations require reinforcing mullions between units.

All dimensions are approximate.

1" SILL RISEROptional

3/8" SILL RISEROptional

[47]

1 7/

8"

[47]

1 7/

8"[47]

1 7/8"

[48]

1 7/

8"[2

5]1"

[9]

3/8"

[38]

1 1/

2"

[29]1 1/8"

[33]

1 5/

16"

[48]1 7/8"

FRA

ME

HE

IGH

T

[33]

1 5/

16"

[91]3 9/16"

[116

]4

9/16

"[3

5]1

3/8"

[91]3 9/16"

[120]4 3/4"

[38]1 1/2"

[151

]5

15/1

6"

FRAME WIDTH

[47]1 7/8"

[116]4 9/16"

[35]1 3/8"

[33]

1 5/

16"

[124

]4

7/8"

[151]6" OAW

FRA

ME

HE

IGH

T

[91]

3 9/

16"

[91]

3 9/

16"

[91]

3 9/

16"

XS OS

FJILJ

XH OH

VENT SILLXS FIXED SILLOS

FJ FIXED JAMBLOCK JAMBLJ INTERLOCKERI

VENT HEADXH FIXED HEADOH

Unit Sections - 1-3/8" Fin Setback

Page 18: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-18

350 Series Sliding Patio Door

Scale 3" = 1' 0"

Combinations require reinforcing mullions between units.

All dimensions are approximate.

[91]

3 9/

16"

[120

]4

11/1

6"[9

1]3

9/16

"[9

1]3

9/16

"[2

9]1

1/8"

[38]

1 1/

2"

[151]6" OAW

[35]1 3/8"

[116]4 9/16"

[115

]4

9/16

"[1

20]

4 11

/16"

[91]

3 9/

16"

[29]

1 1/

8"[9

1]3

9/16

"[1

15]

4 9/

16"

FRA

ME

WID

TH

FRA

ME

WID

TH

[115

]4

9/16

"[1

15]

4 9/

16"

OX

OO

XX

O

FLO

OR

LIN

E

II

IM

SM

XFJ

FJFJ

FJ

INTE

RLO

CK

ER

IFJ

FIX

ED

JA

MB

ME

ETI

NG

STI

LE O

XX

O

MX

ME

ETI

NG

STI

LE O

XO

M

S

INTE

RLO

CK

ER

I

INTE

RLO

CK

ER

I

FJFI

XE

D J

AM

B

FJFI

XE

D J

AM

BFJ

FIX

ED

JA

MB

Unit Sections - 1-3/8" Fin Setback

Page 19: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-19

350 Series Sliding Patio Door

Scale 3" = 1' 0"

Combinations require reinforcing mullions between units.

All dimensions are approximate.

[47]

1 7/

8"[47]1 7/8"

[47]

1 7/

8"[47]1 7/8"

[29]

1 1/

8"[9

0]3

9/16

"[3

8]1

1/2"

[116]4 9/16"

[35]1 3/8"

[29]

1 1/

8"[9

0]3

9/16

"

[38]1 1/2"

[151

]5

15/1

6"

[120]4 11/16"

[29]1 1/8"

[91]3 9/16"

FRAME WIDTH

[151]6" OAW

[48]

1 7/

8"

[32]

1 1/

4"

FRA

ME

HE

IGH

T

[116

]4

9/16

"[3

5]1

3/8"

[38]1 1/2"

[120]4 11/16"

[29]1 1/8"

[91]3 9/16"

FRAME WIDTH

[38]

1 1/

2"

[48]

1 7/

8"

[120

]4

11/1

6"

FRA

ME

HE

IGH

T

SH

TS

TJ

TH

SS

SJ

TRANSOM SILLTS

SIDELIGHT SILLSS

TRANSOM JAMBTJTRANSOM HEADTH

SIDELIGHT JAMBSJSIDELIGHT HEADSH

Unit Sections - 1-3/8" Fin Setback

Page 20: Size and Performance Summary Glazing Performance Grille … · 2020. 4. 20. · Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors 350-SPD-1 350 Series

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com 350-SPD-20

350 Series Sliding Patio Door

[124

]4

7/8"

[91]3 9/16"

[29]1 1/8"

[91]3 9/16"

[120]4 3/4"

FRAME WIDTH

[33]

1 5/

16"

FRA

ME

HE

IGH

T

[91]

3 9/

16"

[47]

1 7/

8"

[47]

1 7/

8"

[47]1 7/8"

[48]

1 7/

8"

[33]

1 5/

16"

[48]1 7/8"

FRA

ME

HE

IGH

T

[33]

1 5/

16"

[47]1 7/8"

[151]6" OAW

[91]

3 9/

16"

[91]

3 9/

16"

XS OS

FJILJ

XH OH

FJ FIXED JAMBLOCK JAMBLJ INTERLOCKERI

VENT SILLXS FIXED SILLOS

VENT HEADXH FIXED HEADOH

Also available for 3- and 4-panel doors.

Unit Sections - Block Frame with Rolscreen