skill final ccna 4

8/2/2019 Skill Final Ccna 4

1/4

ESwitching Basic Switching/Wireless PT Practice SBA

A few things to keep in mind while completing this activity:

1. Do not use the browser Back button or close or reload any Exam windows during the

exam.2. Do not close Packet Tracer when you are done. It will close automatically.

3. Click the Submit Assessment button to submit your work.

Introduction

In this practice Packet Tracer Skills Exam, you will:

configure VLANs using VTP

configure inter-VLAN routing

modify STP

configure port security

add a wireless LAN

Addressing Table

Device Interface Address Subnet Mask Default Gateway

Router1

Fa0/0.10 172.16.10.1 255.255.255.0 n/a

Fa0/0.20 172.16.20.1 255.255.255.0 n/a

Fa0/0.43 172.16.43.1 255.255.255.0 n/a

Fa0/0.67 172.16.67.1 255.255.255.0 n/a

WRSInternet 172.16.67.10 255.255.255.0 172.16.67.1

Wireless 172.16.100.1 255.255.255.0 n/a

SW_DS1 VLAN 43 172.16.43.11 255.255.255.0 172.16.43.1

SW_AC2 VLAN 43 172.16.43.12 255.255.255.0 172.16.43.1

SW_AC3 VLAN 43 172.16.43.13 255.255.255.0 172.16.43.1

PC1 NIC 172.16.10.10 255.255.255.0 172.16.10.1

PC2 NIC 172.16.20.10 255.255.255.0 172.16.20.1

PC3 NIC 172.16.10.11 255.255.255.0 172.16.10.1

PC4 NIC DHCP assigned 255.255.255.0 172.16.100.1

Note: The password for user EXEC mode is cisco. The password for privileged EXEC modeis class.

Step 1: Connect the Devices.

Use the appropriate cable type to make the following connections:

SW_AC2 FastEthernet 0/1 to PC1


2/4

SW_AC2 FastEthernet 0/11 to PC2

SW_AC2 FastEthernet 0/19 to SW_AC3 FastEthernet 0/19

SW_AC2 FastEthernet 0/20 to SW_AC3 FastEthernet 0/20

SW_AC3 FastEthernet 0/18 to WRS

Step 2: Configure the Device Basics.a. Configure the following on SW_AC2.

The switch name is SW_AC2. The privileged EXEC mode uses the following encrypted password: class Enable Telnet and console line login using the following password: cisco Configure the banner message-of-the-day as Authorized access only!

b. To configure the switches for remote management access, create and enable interface VLAN43 on all three switches.

Step 3: Configure Trunking.

Note: Packet Tracer now supports the use of the range argument for the interface command.

For interfaces FastEthernet 0/19 through FastEthernet 0/24 on all three switches:

Configure static trunking.

Assign VLAN 43 as the native VLAN.

Step 4: Configure VTP and VLANs.

a. Step 1: Configure SW_DS1 as VTP server and the following VTP parameters: SW_DS1 is the VTP server. VTP domain name: CCNA VTP password: cisco

b. Create and name the following VLANs on SW_DS1. VLAN 10: Student VLAN 20: Faculty VLAN 43: Management VLAN 67: Wireless

c. Step 2: Configure SW_AC2 and SW_AC3 as VTP clients to participate in the CCNA VTPdomain.

d. Step3: Verify that VTP is operational.

Step 5: Configure Interfaces for VLAN Access

VLAN port assignments on each switch are as follows:

Device Ports Assignment

SW_AC2, SW_AC3 Fa0/1 0/10 10

SW_AC2, SW_AC3 Fa0/11 0/17 20


3/4

SW_AC3 Fa0/18 67

a. Step 1: Configure access ports on access layer switches. Configure the appropriate interfaces on SW_AC2 and SW_AC3 for static

access.

Assign VLANs according to the port assignments table.b. Step 2: Verify trunking and VLAN assignments.

Step 6: Configure Spanning Tree.

a. Modify STP root bridge elections. Using a priority of 4096, set SW_DS1 as the root bridge for all VLANs. Using a priority of 8192, set SW_AC2 as the backup root bridge for all VLANs.

b. Verify the spanning tree election.

Step 7: Configure Inter-VLAN Routing.

Use the information in the Addressing Table to configure Router1 for inter-VLAN routing. Verify inter-VLAN routing.

Step 8: Configure Port Security.

Note: Best practice requires port security on all access ports. However, for this practiceexercise you will only configure one port with security.

a. Configure SW_AC3 with port security on FastEthernet 0/2. No more than 2 MAC addresses are allowed on the FastEthernet 0/2 port for

SW_AC3.

Once learned, MAC addresses should be automatically added to the runningconfiguration.

If this policy is violated, the port should be automatically disabled.b. Verify that port security is implemented.

Step 9: Configure the Wireless LAN.

Refer to the Addressing Table to configure the wireless LAN.

a. Configure WRS. Use static addressing on the Internet interface. Set the router IP and subnet mask. Configure the router to allow wireless hosts to use DHCP. The first host address is the 10th host address in the Wireless LAN subnet. The maximum number of hosts is 25.

b. Configure wireless security. Set the SSID to WRS_LAN. Enable WEP security and use 12345ABCDE as key1.

c. Enable remote management with the password cisco123.


4/4

skill final ccna 4

Documents