sl 15e/20e/25e/35e e-series...smec america crop. 6 7 sl 15e/20e/25e/35e variety of functions machine...
TRANSCRIPT
E-Series
▒ NC Unit Specifications / FANUC SeriesItem Specification 0i-TF, P1
Controlled axis
Max. feed axes 4 AXIS
Feed axes X/Z
Max. simultaneosly controlled axis 4
Least command increment 0.001mm / 0.0001" ◯
Operation functions
Pulse handle feed X1, X10, X100 ◯
Feedrate per minute G98 ◯
Feedrate per revolution G99 ◯
Interpolation functions
Linear interpolation G01 ◯
Circular interpolation G02, G03 ◯
Dwell G04 ◯
Polar cordinate interpolation G12.1, G13.1 ◯
Cylindrical interpolation G70.1 ◯
Variable lead thread cutting G34 ◯
Continuous threading ◯
Reference position return G28 ◯
Reference position return check G27 ◯
Feed functionRapid traverse rate override F0, 25%, 50%, 100% ◯
Feedrate override 0~150%
Spindle functionSpindle orientation ◯
Rigid tapping ◯
Tool functions
Tool number command T4-Digt / T2-Digt ◯
Tool nose radius compensation G40 ~ G42 ◯
Tool offset pairs ◯
Tool geometry/wear offset GEOMETRY & WEAR DATA ◯
Tool life management ◯
Tool path graphic display ◯
Automatic tool offset G36, G37 OPT.
Direct input of tool offset value measured B ◯
Program input
Absolute/incremental programming ◯
Multiple repetitive cycle G70 ~ G76 ◯
Canned cycles G90, G92, G94 ◯
Inch/metric conversion G20 / G21 ◯
Program restart ◯
Retraction for rigid tapping OPT.
Max. programmable dimension ±99999.999mm/±9999.9999" ◯
M function M3 digit ◯
Custom macro ◯
Canned cycle for drilling ◯
Direct drawing dimension programming ◯
Programmable data input G10 ◯
Optional block skip ◯
Workpiece coordinate system G52 ~ G59 ◯
Number of registerable programs 400EA
Setting and
display
Alarm & Operator history display ALARM & OPERATION DISPLAY ◯
Run hour and parts count display RUNNING TIME & PART NO. DISPLAY ◯
Display spindle & servo overload SPINDLE & SERVO LOAD DISPLAY ◯
Self-diagnosis function ◯
Extended part program editing COPY,MOVE, CHANGE OF NC PROGRAM ◯
Display screen 10.4" color
Data input/outputMemory card input/output ◯
USB memory input/output ◯
Editing operation Part program storage size 512Kbyte(1280m) ◯
Manual guide i Manual Guide i OPT.
CNC TURNING CENTER
SL 15E/20E/25E/35E
❖ Design and specifications subject to change without notice.
140 East Ridgewood Ave. Suite 415, Paramus NJ 07652Office: 833-777-7632, Sales: (586) 246-1432Email: [email protected] www.esmecamerica.com
SMEC America Crop. 32
· Cast iron structure for superior dampening characteristics and thermal displacement
· Rigid 45 degree slant bed design for heavy-duty machining
· Torque tube design to minimize bending and twisting
· Integrated box ways for long-term rigidity and heavy-duty machining
SMEC'S Advanced Engineering and Machine Design
SL 15ESL 20E
SL 25ESL 35E
SMEC
SamsungMachine Tools
EngineeringCompany
•1988 - Started as Samsung Heavy Industries Machine Tools Business
•1989 - Horizontal and vertical machining center technology partnership with OKK Japan
•1991 - Turning center and vertical machining center technology partnership with Mori Seiki
•1996 - 5-sided processing center technology partnership with Toshiba
•1999 - Spun out from Samsung Aerospace Industries and established SMEC Co., Ltd
•2018 - SMEC America Corp established to provide factory support to the distributor network and customers
Company History
SMEC America Crop. 54
Spindle Motor(30min/cont.)
25/15 hp (SL 15E)25/20 hp (SL 20E)35/25 hp (SL 25E/35E)
Rapid travel(X/Z)
945/1181 ipm (SL 15E/20E/25E)472/590 ipm (SL 35E)
Feed motor(X/Z)
2.4/4hp (SL 15E/20E)4/5.4 hp (SL 25E)4/9.4 hp (SL 35E)
Spindle Speed
6,000 rpm (SL 15E)4,500 rpm (SL 20E)3,500 rpm (SL 25E)2,800 rpm (SL 35E)
CNC Turning Center SL 15E/20E/25E/35E
SL 15E/20E/25E/35E are Powerful, ultra precision Turning Centers, combined with SMEC's advanced technological features.
■ Highly Reliable and Rigid Structural Design · One piece Meehanite casting with heavily ribbed torque tube design ·Rigid bed supports for powerful cutting ·Excellent vibration dampening and thermal displacement design
High Accuracy, High Rigidity Spindle
▒ Spindle Power & Torque Diagram Unit : inch
Pin Tube Rib Design for Minimal Axis Heat Transfer Radiator fan-like pin tube rib design dissipates heat, maintaining minimal thermal expansion.
Max. Turning Length
20.5 inch (SL 15E/20E)
20.9 inch (SL 25E)
30.7 inch (SL 35E)
Max. Turning Diameter
11.8 inch (SL 15E/20E)
15.0 inch (SL 25E)
19.7 inch (SL 35E)
5030 100 300 500 400020101149862SPINDLE SPEED[rpm]
4030
20
10
543
2
PO
WE
R [
hp
]
24.8hp20.1hp
Torq
ue=1
51.2
ft.lbs
(15min.
S3 25
%)
Torq
ue=1
22.6
ft.lbs
(60min.
S3 40
%)
Torq
ue=9
2 ft.lb
s(Con
t.)
30 50 100 300 500 1000 2000 3500 600025001500SPINDLE SPEED[rpm]
30
20
10
543
2P
OW
ER
[h
p]
24.8hp20.1hp
14.7hp
Torqu
e=86
.9 ft.l
bs(S3 1
5%)
Torqu
e=70
.4 ft.l
bs(S2 1
5%, S
3 25%
)
Torqu
e=51
.7 ft.l
bs(S2 6
0min.
, S3 4
0%)
Torqu
e=38
.7 ft.l
bs(S1 C
ont.)
SPINDLE SPEED[rpm]
4050
30
20
10
543
2
PO
WE
R [
hp
]
1753 35002016503010 100 336
Torqu
e=46
1.1 ft.
lbs(30
min. S3 6
0%)
Torqu
e=38
7.7 ft.
lbs(C
ont.)
Torqu
e=54
4.9 ft.
lbs(S3 2
5%)
29.5hp
34.9hp
24.8hp
SL 25E SL 35ESL 20ESL 15E
SPINDLE & HEADSTOCK The Spindle and Headstock are machined and ground in a temperature controlled environment and assembled in a clean room.
SL 15E/20E/25E/35E SL 35E Output Converting Transimission
Precision double row cylindrical roller bearings and angular contact ball bearings are located in the front of the spindle, and a double row of cylindrical roller bearings is located in the rear to ensure heavy cutting capabilities with precision.
26.7
45.33
6.67
26.67
53.3340
3010
107 837
20001920
320
50 100 300 500 1000 5000 10000
13.33
SPINDLE SPEED[rpm]
PO
WE
R [
hp
]
Low Gear : 107~837rpmHigh Gear : 320~2,000rpm
Torque=1447.3 ft.lbs
Torque=1217.3 ft.lbs
Torque=483.38 ft.lbs
Torque=407.21 ft.lbs
Torque=1447.3 ft.lbs
Torque=1217.3 ft.lbs
Torque=483.38 ft.lbs
Torque=407.21 ft.lbs
30hp
25hp
30hp
25hp
�
SMEC America Crop. 76
Variety of FunctionsSL 15E/20E/25E/35E
▒ Machine Structure
Manual Tailstock(carriage direct-coupled) The manual tailstock body is mounted on wide guide ways to ensure rigid work piece support.
Hexahedral Slide Way Frame Wide integral way is machined from the casting, induction hardened and precision ground to ensure long-term rigidity, machining accuracy and heavy-duty machining.
Pre-tensioned and Double Anchored Ballscrews
Swivel Operation PanelSwivel operation panel of 8.4 inch color TFT LCD monitor can turn to 90 degree, providing operators with easy access to the control panel while working on the machine.
Rigid 45 degree Slant Bed 45 degree slant torque tube design bed and wide guide slide way ensure long term rigidity and machining accuracy.
Featuring superior workability and chip-discharging capability, the bed is designed in a single tube structure boasting strong durability even in heavy-duty cutting.
90deg
SL 20E/25E Cross-Section of the Bed
All axes ballscrews are pre-tensioned, heat treated and fixed by double anchors on both ends, providing ultimate rigidity and minimal thermal growth.
▒ Machine Structure
Hexahedral Slide Way Frame
SL 25E(35E) (High Speed Hyd. index Turret)SL15E/20E (High Speed Hyd. index Turret)
Indexing time
0.25 sec.Number of tool positions
10 stationsTurret Indexing Repeatability
±0.00012"Curvic Coupling Dia.
Ø7.08"Curvic Clamping Force
5,070 lbs
Indexing time
0.25 sec.Number of tool positions
12 stationsTurret Indexing Repeatability
±0.0002"Curbic Coupling Dia
Ø8.27"(9.84")Curbic Clamping Force
6,404 lbs(14,059 lbs)
CNC TURNING CENTER
SL 15E/20E/25E/35ECNC TURNING CENTER
SAMSUNG MACHINE TOOLS 98
Variety of Functions
SMEC America Crop. 98
▒ High PrecisionSurface Roughness <O.D. cutting>
▒ Processing Speed
Heavy-duty cutting (O.D) <1 inch×1 inch qualified tool>
Turning Performance (material:SM45C) SL20E
●Model : SL 20E / 25E
10㎛
Roundness
0.24 inch
Cutting condition
Tool Diamond tool (nose radius 0.020 inch)
Material AL150(Aluminum)Cutting speed 745.6 fpmFeedrate 0.0020 iprDepth of cut 0.004inchOuter diameter 7.9inchFilter 1-50
2.1㎛ R y12㎛
10㎛
-10㎛
-12㎛3.98mm
Peak To Valley=2.311㎛
▒ Tooling System
0.35㎛(actual result)
Spindle Speed516 rpmCutting Speed120 m/min (393 fpm)Depth 0f cut0.24 inch <Spindle Load 50%>Feedrate0.3mm/rev (0.08 ipr)
▒ Standard Accessories
Manual Tailstock (Prog. Quil)
Automatic Lubricator
Tool Presetter
Parts CatcherChip Conveyor
Auto Door
▒ Optional Accessories
Zaxis
0
SL 15E/20E10-Station Turret
0
SL 25E12-Station Turret
� : Standard Set Numbers
SL 15E/20E/25E/35ECNC TURNING CENTER
Variety of Functions
SMEC America Crop. 1110
▒ Major Specifications
▒ Optional Accessories
•TOOL PRESETTER •HARD JAWS 1 SET •CHIP CONVEYOR •PARTS CATCHER •AUTO DOOR •AIR BLOW UNIT •AUTO MEASURING SYSTEM
▒ Machine Dimensions
▒ Turret Head InterferenceUnit : inch
▒ Work RangeUnit : inch
DESCRIPTION SL 15E SL 20E SL 25E SL 35E
CAPACITY
Swing over the bed inch 17.7 17.7 20.5 23.6
Swing over the cross slide inch 11.8 11.8 13.8 16.7
Max. machining diameter inch 11.8 11.8 15.0 16.5
Max. machining length inch 20.5 20.5 20.9 30.7
MAIN SPINDLE
Chuck size inch 6 8 10 12
Speed rpm 6,000 4,500 3,500 2,800
Spindle nose ASA A2-5 A2-6 A2-8 A2-11
Bore diameter inch 2.4 3.0 3.4 4.53
Draw tube I.D. inch 2.1 2.7 3.0 4.1
Motor(30min/cont.) hp 25 / 15 25 / 20 35 / 25 35 / 25
TRAVEL
X/Z axis travel inch 7.1 / 22.0 7.1 / 22.0 8.7 / 23.2 9.5 / 33.7
X/Z rapid traverse rate ipm 945 / 1,181 945 / 1,181 945 / 1,181 472 / 590
X/Z feed motor hp 2.4 / 4 2.4 / 4 4 / 5.4 4 / 9.4
TURRET
Number of tool positions st. 12 12 12 12
Indexing time sec 0.25 0.25 0.25 0.25
Shank size for square tool inch □1 □1 □1 □1
Shank diameter for boring bar inch Ø2 Ø2 Ø2 Ø2
TAILSTOCKTailstock quill travel inch 3.1 3.1 3.9 4.7
Tailstock quill diameter inch 3.0 3.0 4.3 5.1
ELECTRIC POWER SUPPLY kVA/V 29 / 220 29 / 220 32 / 220 42 / 220
REQUIRED FLOOR SPACE inch 109.6(142.3)x59.3 109.6(142.3)x59.3 130.1(167.6)x63.7 153(187)x73
MACHINE WEIGHT lbs 8,580 8,580 11,000 17,700
CONTROLLER Fanuc 0i-TF Fanuc 0i-TF Fanuc 0i-TF Fanuc 0i-TF
▒ Standard Accessories
•COOLANT SYSTEM •BUILT-IN WORK LIGHT •SPLASH GUARD •HAND TOOLS •TOOL HOLDER •3JAW HYDRAULIC CHUCK
•Figures in inches are converted from metric measurements.•Design and specifications are subject to change without notice.
Unit : inch
▣ SL 15E / 20E, SL 25E, SL 35E
•SOFT JAWS 3 SETS•LEVELING BLOCK•�TAILSTOCK(Manual body
Programmable Quil)
SL 15E/20E SL 25E SL 35E
SL 15E/20E SL 25E(35E)
68.9 [77.8]
33.9 [39.4] [42.9]
68.9
72.2 [76.2] [83.9]
3.1 94.9 [119.7] [142.5]
39.8 [58.7] 11.6 [10.4]24.2 [26.8] [Door Open]
44.3 [48] [43.9]
56.9 [66.2] [72.6]
13.7 [15]
6 X-Axis Zero Return
7.08 X-axis Stroke
0.98
0.1
Ø2.95
8”Chuck
3.15 [Tailstock Quill Stroke]
15.75 [Tailstock Stroke]4.9
2.36 1.7 22.05 [Z-axis Stroke]18.11 [Z-axis Zero Return] 3.94
A2-8
MT57 (8) X-axis Zero Return
1.18
1.18
8.66 X-axis Stroke
7 X-axis Zero Return
8.66 (9.45) X-axis Stroke
2.36 (2.76)
3.66 (4.06)
4.92
5.12 (7.13)
10.24 10" (12”) CHUCK
3.94
Tailstock SpindleStroke
19.3 (27.8) Tailstock Stroke
23.23 (33.6) Z-axis Stroke
0.48
0.48 (0.27)
0.281.97 (5.91)21.26 (27.7) Z-axis Zero Return
1.57
8.27 (9.45)
8.27
1.57
Ø11.8
[Max. Machining Dia.]
Ø19.4
[Max. Tool Swing]
Ø9.56
Ø8.6
Ø1.5
1.57
1.57
4.174.17
1.2
1.17
1
6.58.07 7.08
15.15
1.6 6.1 0.98
0.27 1.97
1.57
1.28
14.96
[Max.
Turning Dia.]
8.27
9.84
18.5
8.66(X-axis Stroke)
7.481.57 1.18
Ø23.39
[Max. Swing Dia.]
Ø9.02
Ø2
Ø8.53
Ø8.7
4.17
1.970.27
4.17
4.17
1.57
1.57
∅16.54
[Max. Machining Dia.]
8.27 1.181.579.4511.02 9.45[X-axis Stroke]
20.47
∅11.97
1.57
4.64
∅2
12.36
1.97
0.28
4.64
∅12.16
(1.97)1.57
4.64
∅12.91
∅26.42 [Max. Turning Dia.]