slant/fin radiationslant/fin radiation trade price book june 15, 2018 revised: march 1, 2019...

SLANT/FIN RADIATION

Trade Price BookJune 15, 2018

Revised: March 1, 2019

PUBLICATION R-01 Printed in U.S.A. 319

We Build Trust and Comfort.

Trade price books intended for wholesaler use only.

Hydronic Explorer Heat loss Calculator

For all dimensional data, catalog sheets and installation manuals

www.slantfin.com

Aluminum Baseboard Replacement Cover

Revital/Line Replacement Cover slips right over existing baseboard back panel... Ours and theirs! See pages 6, 7 and back cover for more information.

2

TABLE OF CONTENTS

Page

Fine/Line 30 Baseboard ........................................ 3 Base/Line 2000 Baseboard ................................... 4 Multi/Pak 80 Baseboard ........................................ 5 Revital/Line Baseboard Cover .............................. 7 Decorator Series Full Enclosures ......................... 8 The Kicker Kickspace Heater ............................... 9 Hydronic Floor Box ............................................. 9 Fast/Flex Connectors ............................................ 10 Commercial Fin-Tube ........................................... 11 Packaged Fin-Tube Enclosures: Multi/Pak 90 Slope Top .................................. 12 Multi/Pak 93 Flat Top ..................................... 13 Multi/Pak 95 Flat Top ..................................... 14 Baseboard Accessories & Touch-up Paint ........ 15

For additional commercial radiation products, refer to Slant/Fin Commercial Radiation Price Book (Pub. No. R-01C)

Note: Minimum net order $15.00. Minimum order per accessory line item $15.00

BASEBOARD PALLET QUANTITIES

Number of pieces per pallet

Base/Line 2000 Half Skid Lengths Base/Line 2000 Fine/Line 30 Fine/Line 30 Half Skid Multi/Pak 80 Revital/Line 2' thru 6' 70 75 30 48 40 7' and 8' 70 75 30 36 40 10' 50 50 n/a 28 N/A 12' 30 30 n/a 28 N/A 14' 30 30 n/a 24 N/A

Please order in full pallet quantities whenever possible.

FAX ORDERS TO: 516-484-2694 EMAIL ORDERS TO: [email protected]

Cancellation of Custom Painted Material NON-REFUNDABLE

Our Decorator Series and painted Commercial baseboard painted material is considered custom and cannot be cancelled once the painting is completed. If the material has not been painted, before the time of the order cancellation, there is no charge.

Once the order is shipped and or painted, this material cannot be returned or cancelled. If you would like to cancel your order, then you must call us directly at 516-484-2610 ext 369. Customer Service will take the information and let you know if order can be cancelled. If you do not contact us in time or if you attempt to cancel via e-mail, causing a delay in the cancellation, and your order ships, then you will be responsible for any and all shipping fees, along with the cost of the material.

Standard Colors Metallic Colors ** Baseboard Accessories Add: $5.53 per pc Add: $8.53 per pc

Note: Call factory for order codes for Decorator Series products.

3

Fine/Line® 30 Baseboard NU-WHITE RUST RESISTANT GALVANIZED STEEL

Shipping Order Stock No. Output* Wt./Ft. Code Price/Ft. COMPLETE ASSEMBLY 30-75 750 2.7 lbs. 101-401 $16.93* ELEMENT ONLY, 3⁄4" E-75 — 0.6 lbs. 101-002 11.14 ENCLOSURE ONLY 30-DW — 2.2 lbs. 101-403 9.48

Complete assembly. Factory assembled, packed in individual Zip-Strip cartons. Price includes 3⁄4" copper/aluminum element, enclosure, brackets, plastic expansion cradles and damper. One piece splice plate also included with lengths 5' and longer. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7, 8, 10, 12, and 14 feet. (10, 12 and 14 foot assembly contains two separate elements.)

Element only. (No enclosure.) Complete with plastic expansion cradles. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7, 8 feet.

Packing Per Ship Wt. Order SNAP-ON HINGED ACCESSORIES Master Carton (lbs.) Code Price Each End cap, 33⁄4" wide (R or L), 1 per box 24 22 (R)101-405 $11.33

(L)101-404 End cap floor length, 41⁄8" wide (R or L), 2 per box 48 43.2 (R)101-440 11.33

(L)101-439 End cap, 33⁄4" wide, slotted (R or L), 2 per box 48 38.4 (R)101-407 11.93

(previously called Wall Trim) (L)101-406 End cap floor length, 41⁄8" wide, slotted (R or L), 2 per box 48 38.4 (R)101-441 11.33

(previously called Wall Trim) (L)101-442 Inside corner, 90°, 2 per box 48 38.4 101-410 8.55 Inside corner, 135°, 2 per box 48 0.8 101-411 16.25 Inside corner field adaptable for angles 91° to 179° 40 0.8 101-450 17.89 Valve cover, 81⁄8" wide (R or L), 2 per box 24 33.6 (R)101-418 23.38 (L)101-417 Valve cover, 81⁄8" wide (R or L), slotted †, 2 per box 24 33.6 (R)101-437 24.15 (L)101-438 Center valve cover, 81⁄8" wide, 2 per box 24 1.2 101-419 23.38 Custom angle inside corner (from template/sketch) † As ordered 0.8 101-412 66.77 SNAP-ON ACCESSORIES – (NON-HINGED) End cap, non-hinged, 2" wide (R or L), 4 per box 96 0.6 (R)101-431 $5.87 (L)101-432 Filler sleeve, 14" wide – 4 pc set ˚ 12 25.2 101-408 16.65 Filler sleeve, 7" wide – 4 pc set ˚ 12 13.2 101-409 12.39 Splice plate, 2" wide (standard) solid As ordered 0.2 101-640 4.72 Outside corner, 90° 6 0.8 101-414 16.78 Outside corner, 135° 6 0.8 101-415 17.80 Wall trim, 41⁄4", 2 per box 48 14.1 101-641 5.27 Custom-angle outside corner (from template/sketch) † As ordered 0.8 101-416 66.77 ADDITIONAL ACCESSORIES/COMPONENTS Front panel only As ordered 0.6/ft. 101-433 $6.40/ft. Damper only As ordered 0.2/ft. 102-035 3.64/ft. Support brackets with damper pivot As ordered 0.2 101-020 5.67 Damper pivots only As ordered 0.1 101-036 .90 Plastic expansion cradle, E-75 element As ordered 0.06 101-023 1.16 Vented return bend 3⁄4" (17⁄8" center to center (c-c) 24 4.8 101-024 26.36 Non-vented return bend 3⁄4" (17⁄8" center to center (c-c) 24 4.8 101-028 13.18

* BTU/hr/ft at 200° water temp., 4 g.p.m. flow. † Call factory for lead time.

˚ Not available for Decorator series

30 SERIES

Decorator Color charges: 30-DS is Powder Coated in Decorator Series Colors $50 list set-up charge per color on orders less than 25 ft. per color No set-up charge for Brite White or Nu-White *See list on page 8 for Decorator Style (DS) cover pricing.

Enclosure only. Complete assembly, without element. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7, 8, 10 12, and 14 feet. Splice plate included in 5 ft. and longer.

Sold as “Cover Only” (Element ordered separately). ** Rubbed Bronze is a Metallic Color.

BL SERIES

Base/Line® 2000 Baseboard

NU-WHITE

Approx. Shipping Stock No. Output* Wt./Ft. Order Code Price/Ft.

COMPLETE ASSEMBLY, 1/2" TUBE BL-50 740 2.0 lbs. 104-001 $11.79

COMPLETE ASSEMBLY, 3/4" TUBE BL-75 740 2.0 lbs. 104-002 12.42

ELEMENT ONLY, 1/2" E-50 — 0.5 lbs. 102-026 9.89

ELEMENT ONLY, 3/4" E-75 — 0.6 lbs. 101-002 11.14

ENCLOSURE ONLY BL-D — 1.5 lbs. 104-003 6.95

Complete assembly. Factory assembled; packed in individual cartons. Price includes element, enclosure, brackets, plastic expansion cradles and damper. Splice plate also included with lengths 5' and longer. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7, 8 and10 feet. (10 foot assembly contains two separate elements.)

Element only. (No enclosure.) Complete with plastic expansion cradles. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8

Enclosure only. Complete assembly, without element. Pre-cut lengths 2, 3, 31⁄2, 4, 5, 6, 7, 8 and 10 feet. Splice plate included in 5 ft. and longer.

Packing Approx. Per Master Shipping Price SNAP-ON HINGED ACCESSORIES Carton Wt.(lbs.) Order Code Each

End cap, 4" wide (R or L), 1 per box 48 36.5 (R) 104-006 $ 9.48 (L) 104-007

Valve cover, 8" wide (R or L) 40 1.5 (R) 104-027 17.48 (L) 104-028

SNAP-ON ACCESSORIES – (NON-HINGED)

End cap, 2" wide, solid metal (R or L), 1 per box 96 31.9 (R) 104-004 $ 5.41 (L) 104-005

Wall trim, 4" wide, 2 per box 48 9.6 104-010 4.08 Filler sleeve, 12" wide As ordered 18.0 104-013 11.61 Filler sleeve, 7" wide As ordered 9.6 104-014 9.48 Wall trim/Splice plate, 2" wide (solid) As ordered 0.2 104-021 4.26 Inside corner, 90°, 2 per box 48 9.6 104-015 7.54 Inside corner, 135°, 2 per box 40 0.2 104-016 8.33 Outside corner, 90° 6 1.2 104-017 15.49 Outside corner, 135° 6 0.4 104-018 16.24

ADDITIONAL ACCESSORIES/COMPONENTS

Front panel only As ordered 0.4/ft. 104-034 $ 6.00/ft. Damper only As ordered 0.2/ft. 104-035 3.47/ft. Support brackets with damper pivot As ordered 0.2 104-019 5.23 Damper pivot only As ordered 0.1 190-044 .90

Plastic expansion cradle, E-75 or E-50 element As ordered 0.06 101-023 1.16

* BTU/hr/ft at 200° water temperature, 4 g.p.m. flow.

4

80 SERIES

Multi/Pak® 80 Baseboard NU-WHITE RUST RESISTANT GALVANIZED STEEL

Ship Ship Wt./Ft. Order Stock Heating Wt./Ft. Order Stock No.* Heating Element Output ‡ (lbs.) Code Price/Ft. No. Element Output‡ (lbs.) Code Price/Ft.

Fully assembled enclosure and element H-1 3⁄4" copper with 1030 1.3 103-061 $20.89 83A 3/4" H-3 element 940 3.6 103-401 $22.68* aluminum fins H-3 3⁄4" copper with 940 .9 103-005 12.94 ENCLOSURE ONLY aluminum fins 80D (for H-1,-3,-4,-5x; – 2.9 103-409 $12.07 H-4 1" copper with 930 1.0 103-006 16.45 H-6x elements) aluminum fins H-5x 11⁄4" copper with 970 1.6 103-007 29.99 aluminum fins H-6x 11⁄4" IPS steel with 840 4.6 103-008 29.83 aluminized steel fins

COMPLETE ASSEMBLY ELEMENT ONLY

83A Complete Assembly: Packed in individual Zip-Strip cartons. Price includes element, enclosure, brackets, plastic expansion cradles, and damper. Splice plate set also included with lengths 5' and longer. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7, 8, 10, 12 and 14 feet. (10, 12 and 14 foot assembly contains two separate elements.)

Enclosure only: Complete assembly, without element. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7, 8, 10, 12 and 14 feet. Splice plate included in 5 ft. and longer. Element only: (No enclosure.) Complete with expansion cradles. H-6 element includes pitch block. Pre-cut lengths: 2, 3, 31⁄2 , 4, 5, 6, 7 and 8 feet.

Packing Per Ship Wt. Order SNAP-ON HINGED ACCESSORIES Master Carton (lbs.) Code Price Each End cap, 4" wide (R or L), (1 per box coming soon) 24 52.8 (R) 103-411 $14.77

(L) 103-412 End cap, slotted 4" wide (R or L), (1 per box coming soon) 24 43.2 (R) 103-413 14.77

(previously called wall trim) (L) 103-414 Inside corner, 90°, 2 per box 48 19.2 103-417 10.10 Inside corner, 135°, 2 per box 48 0.4 103-418 23.75 Inside corner field adaptable for angles 91° to 179° As ordered 0.4 103-443 26.08 Valve cover, 8" wide (R or L), 2 per box 12 22.8 (R) 103-424 27.24 (L) 103-425 Slotted valve cover, 8" wide, (R or L), 2 per box 12 21.6 (R) 103-427 28.17 (L) 103-428 Center valve cover, 8" wide, 2 per box 12 22.8 103-436 27.24 Zone valve box, 91⁄2" W, 9" H, 31⁄2" D (R or L) † 10 1.2 (R) 103-438 66.77 (L) 103-439 Custom angle inside corner † As ordered 0.4 103-419 66.77 SNAP-ON ACCESSORIES – (NON-HINGED) Wall trim, 4" wide As ordered 0.5 103-426 $7.07 Wall trim/Splice Plate, 2" wide As ordered 0.25 103-433 6.82 Filler sleeve, 14" wide 12 2.4 103-415 19.16 Filler sleeve, 7" wide 24 1.2 103-416 14.87 Outside corner, 90° 6 0.8 103-421 23.21 Outside corner, 135° 6 0.8 103-422 26.83 Custom-angle outside corner (from template/sketch) † As ordered 0.8 103-423 82.42 ADDITIONAL ACCESSORIES/COMPONENTS Front panel only As ordered 1.0/ft. 103-437 $6.58/ft. Damper only As ordered 0.4/ft. 103-460 3.36/ft. Support bracket As ordered 0.2 103-030 5.67 Plastic expansion cradle for H-3 As ordered 0.1 103-033 1.16 Plastic expansion cradle for H-1, H-4, H-5x or H-6x (specify) As ordered 0.1 103-034 1.16 Vented return bend 3⁄4" (17⁄8" c-c) available for 83A only 24 4.8 101-024 26.36 Non-vented return bend 3⁄4" (17⁄8" c-c) 24 4.8 101-028 13.18

‡ BTU/hr/ft at 200° water temperature, 4 g.p.m. flow † Call factory for lead time.

Decorator Color charges: 30-DS is Powder Coated in Decorator Series Colors $50 list set-up charge per color on orders less than 25 ft. per color No set-up charge for Brite White or Nu-White *See list on page 8 for Decorator Style (DS) cover pricing.

5

Standard Colors Metallic Colors ** Baseboard Accessories Add: $6.52 per pc Add: $9.52 per pc

Note: Call factory for order codes for Decorator Series products.

Sold as “Cover Only” (Element ordered separately). ** Rubbed Bronze is a Metallic Color.

®

Easy Snap-on Replacement Covers. Revitalize any room quickly and easily. No tools

required for most installations. Designed to fit over 90% of standard residential

baseboard, measuring 8.5” H x 3” D. The standard Color is Brite White with 10 other colors

available. Perfect to use for one room or renovations of your whole house.

For use with hydronic baseboard only.

Finely crafted enclosures that are powder coated to provide an attractive, durable, baked enamel

like finish that provides resistance to abrasion, impact, corrosion and chipping. We offer 11

architecturally pleasing colors, with paint chips available upon request. Slant/Fin’s Decorator

Series is an affordable option to take decorating to new heights.

Our Classic 30 Series and our premium Hi-output 80 Series style Baseboard covers are powder-

coated, with 11 Decorator Colors to choose from, including our popular Brite-White. Both options are

perfect for new installations and full remodeling efforts so you can maintain the comfort of Hydronic

Heating while enhancing your décor. (Brite White or NuWhite has no minimum quantity

requirements to avoid the setup charges)

Full Enclosure

Baseboard Replacement Cover

&Full Enclosure • Replacement Cover

Colors to enhance any decor!

6

RVTL SERIES

®

Stock No Shipping Wt./Ft. Order Code Price/Ft.

Revital/Line™ Replacement Cover (Stocked in Brite White) RVTL 1.25 061-000-0XX* $19.99

Cover only. Zip-Strip cartons. Price includes powder coated cover (Revital/Line™ includes front cover, plastic spacers and metal spacing brackets). Pre-cut lengths: 2, 3, 3 1/2, 4, 5, 6, 7, 8. Splice plates are not included. *Listed part # is for Brite White

NEW SNAP-ON ACCESSORIES (NON-HINGED)

Master Carton Qty. Weight Order Code Price/Ea.

End Cap, 2" Wide (L or R) 12 0.4 (L) 061-015-000* (R) 061-016-000* $11.00

End Cap, 4" Wide (L or R) 24 0.7 (L) 061-004-001* (R) 061-004-002*

13.00

Inside Corner, 90° 24 0.9 061-008-000* 15.00

Inside Corner, 135° 6 0.4 061-017-000* 19.00

Outside Corner, 90° 6 .90 061-020-000* 19.00

Outside Corner, 135° 6 .90 061-025-000 19.00

Aluminum End Plate 24 0.5 061-007-000* $13.00

Filler Sleeve, 14" Wide 12 1.4 061-009-014* 15.00




$50 list setup charge for all colors except Nu-White. *Listed part number is for Brite White.

Aluminum Replacement Cover

IC-90˚ (Shown) IC-135˚

OC-90˚ (Shown) OC-135˚

Filler Sleeve 2", 4" (Shown),

7" and 14"

End Cap 2" REC & LEC

4" REC (Shown) & LEC

End Plate (Universal) For a flat finish

*Use code below for 7th digit for color. For lengths, put footage in the 8th digit (e.g., F40 is Rubbed Bronze in 4ft).

Nu-White 1 Rubbed Bronze ** F

Shell White 4 Cloud Grey 3

Almond 2 Flat Black 5

Architectural Bronze U Mirror Black E

Chestnut Y Chocolate Z

Available Decorator Colors For standard colors listed below, add $6.00 per foot on cover and $4.00 per accessory.

** Metallic Decorator Colors add $10.00 per foot on cover and $7.00 per Accy.

7

** Rubbed Bronze is a Metallic Color.

8

DS SERIES

Stock No Shipping Wt./Ft. (lbs.) Order Code Price/Ft.

30 Decorator Style Enclosure 30-DS 2.2 101-413-XXX* $21.56

E-75 E-75 0.6 101-002 11.14

80 Decorator Style Enclosure 80-DS 2.9 103-419-XXX* 26.15

H-1 H-1 1.3 103-061 20.89

H-3 H-3 0.9 103-005 12.94

H-4 H-4 1.0 103-006 16.45

H-5 H-5 1.6 103-007 29.99

H-6 H-6 4.6 103-008 29.83

Enclosure only. Zip-Strip cartons. Price includes powder coated enclosure. 30-DS & 80-DS includes front panel, back panel, damper and brackets (splice plates not included). Pre-cut lengths: 2, 3, 3 1/2, 4, 5, 6, 7, 8. *7th digit for color code - 8th digit for footage. (Example: F40 is Rubbed Bronze 4ft)

Snap-On Hinged Accessories

Master Carton

Ship Wt. (Lbs.)

30-DS 80-DSOrder Code Price/Ea. Order Code Price/Ea.

End Cap, 3 3⁄4" Wide (R or L) 24 43.2(R)101-405-XXX*★ $16.86 (R)103-411-XXX*★ $21.29

(L)101-404-XXX* (L)103-412-XXX*

Snap-On Non-Hinged Accessories

Master Carton

Qty.

Ship Wt. (Lbs.)

30-DS 80-DS

Order Code Price/Ea. Order Code Price/Ea.

Splice Plate, 2" Wide (Std.) Solid — 0.2 101-640-XXX* 10.25 103-433-XXX* 13.34

Inside Corner, 90° 48 38.4 101-410-XXX* 14.08 103-417-XXX* 16.62

Inside Corner, 135° 48 0.8 101-411-XXX* 21.78 103-418-XXX* 30.27

Outside Corner, 90° 6 0.8 101-414-XXX* 22.31 103-421-XXX* 29.73

Outside Corner, 135° 6 0.8 101-415-XXX* 23.33 103-422-XXX* 33.35

For additional accessories and decorator pricing, see 30 and 80 series pages.

Decorator Series (Listed price includes paint charge): Powder Coated in Decorator Series Colors • Splice Plates are not included. • Baseboard lengths need to be covered all ends. • $50 list set-up charge per color on orders of less than

25ft. (except for Nu-White and Brite White)

&

• Full Enclosure • Replacement Cover

Colors to enhance any decor!

*7th digit for color code

*Use code below for 7th digit for color. For lengths, put footage in the 8th digit (e.g., F40 is Rubbed Bronze in 4ft).

Nu-White 1 Rubbed Bronze ** F

Shell White 4 Cloud Grey 3

Almond 2 Flat Black 5

Architectural Bronze U Mirror Black E

Chestnut Y Chocolate Z

Available Decorator Colors

** Metallic Decorator Colors add $4.00 per foot on cover and $3.00 per Accy.

** Rubbed Bronze is a Metallic Color.

9

TK SERIES

The Kicker® MULTI–PURPOSE FAN CONVECTION HEATER

Model Shipping Order No. Output † Weight Code Price

TK-70 6601 13 lbs. 125-007 $365.70

TK-90 8770 14 lbs. 125-009 $431.42

COMPLETE KIT for kickspace installation

Output † Shipping Order Kit No. TK-70 TK-90 Weight Code Price

7805 10465 8 lbs. 125-011 $74.94

7805 10465 12 lbs. 125-012 $115.54

ACCESSORY KIT for wall mount installations of TK-70 or TK-90

RMK RECESSED

WALL MOUNT

SMK SURFACE

WALL MOUNT

Includes cabinet, front panel and hardware for wall mounting the TK-70 or TK-90 hydronic fan convection heater. RMK front panel has almond baked epoxy finish. Two-tone SMK enclosure includes barley beige baked epoxy cabinet with almond front panel.

Includes complete hydronic fan convection heater and grille for kickspace installation. † BTU/hr at 200° water temperature, 3 g.p.m. flow.

The Slant/Fin Hydronic Floor Box is a recessed floor mounted assembly that provides high heat output at patio doors, floor length windows and other areas where wall mounted radiation is impractical. The Hydronic Floor Box is designed to utilize a 5 foot H-3 3⁄4" heating element and may be installed as part of any 3⁄4" copper tube system. Overall box dimensions are 89⁄16" deep X 63⁄16" wide X 629⁄16" long, top grille is 8" wide X 65" long.

Output † Per Ship Order Model # Description 5 ft. Length Weight Code Price HF-BP* Hydronic floor box (less grille**) 4040 35 lbs 107-193 $225.78 (With element) HF-B* Hydronic floor box only – 30 lbs 107-192 159.00 (Less element & grille) HF-TG-EG Top grille only–electro gal 5 lbs 107-191 160.06 HF-TG-BE Top grille only–Nu-White 5 lbs 107-190 168.54 HF-TG-DS T-DS (Other standard Decorator colors) 5 lbs 107-190 199.28 HF-TG-DS T-DS (Metallic Decorator colors - Rubbed & Metallic Bronze) 5 lbs 107-190 219.25

**Includes floor box plus 5 ft. H-3 element with expansion cradles and two riser rings. † Output at 200° water temperature, 4 g.p.m. flow. * Grille must be ordered separately for all boxes $50 list set-up charge per color on orders less than 25 ft. per color No set-up charge for Brite White or Nu-White

HF SERIES

Hydronic Floor Box BONDED ZINC FINISH

10

FF SERIES

Fast/Flex® Connectors*

–Bronze

Flex Order Order Order Order Number Description Lgth Code Price Code Price Code Price Code Price

600 9" Stub x coupling 8" 116-601 $20.77 116-602 $27.55 116-603 $38.18 116-604 $53.50 600A 9" Stub x tubing 8" 116-605 20.77 116-606 26.85 116-607 35.57 116-608 48.96 600AC 5" Stub x coupling 12" 116-609 23.17 116-610 32.96 116-611 45.75 116-612 59.88


800 Coupling x coupling 7" 116-613 $18.56 116-614 $25.99 116-615 $34.90 116-616 $50.28 801 Tubing x coupling 7" 116-619 18.12 116-620 25.29 116-621 32.31 116-622 45.76 901 M.P.T. x M.P.T 7" 116-625 22.62 116-626 32.00 116-627 51.64 116-628 72.74

902 F.P.T. x F. P.T. 7" 116-631 25.57 116-632 34.48 116-633 52.39 116-634 78.24 903 M.P.T. x F. P.T 7" 116-637 24.09 116-638 33.24 116-639 52.07 116-640 75.46 904 Tubing x tubing 7" 116-643 17.73 116-644 23.74 116-645 29.69 116-646 41.30


907 Coupling x coupling 3" 116-649 $15.12 116-650 $20.56 116-651 $28.51 N/A – 907A Tubing x coupling 3" 116-652 14.67 116-653 19.40 116-654 25.96 N/A –


500 Tubing x tubing see 116-655 $118.72 116-656 $148.40 116-657 $193.98 116-658 $252.28 cat.

1/2" 3/4" 1" 11⁄4"

1/2" 3/4" 1" 11⁄4"

1/2" 3/4" 1" 11⁄4"

1/2" 3/4" 1" 11⁄4"

BASEBOARD RISER FITTINGS

GENERAL PURPOSE FITTINGS

ELBOW FITTINGS

BRAIDED HOSE FITTINGS

NOTE: Larger sizes available in most items; prices on application. See publication EC-FF-10 for complete details and specifications.

* Not for steam installations

11

FIN- TUBECommercial Fin-Tube

Element Type

S-532

S-540

S-832

C-340*

C-440

C-540

H-1

H-3

H-4

H-5x

H-6x

Tube Size and Material

11⁄4" I.P.S. steel


2" I.P.S. steel

3⁄4" copper

1" copper

11⁄4" copper

3⁄4" copper

3⁄4" copper

1" copper

11⁄4" copper


Fin Size and Material

41⁄4" x 4 1⁄4" x .024" electro gal. steel

41⁄4" x 41⁄4 " x .024" electro gal. steel

41⁄4" x 41⁄4 " x .024"

electro gal. steel

41⁄4" x 41⁄4 " x .020" aluminum

41⁄4" x 41⁄4 " x .020" aluminum

41⁄4" x 41⁄4 " x .020" aluminum

3" x 31⁄4" x .020" aluminum

23⁄4" x 21⁄2" x .011" aluminum

3" x 21⁄2" x .011" aluminum

3" x 31⁄4" x .020" aluminum

3" x 31⁄4" x .028" aluminized steel

Fins

Per Foot

32

40

32

40

40

40

48

55

48

48

48

Shipping Wt./Ft lbs.

6.00

7.00

7.00

1.65

1.90

2.25

1.30

.90

1.00

1.60

4.60

Order Code

106-001

106-002

106-003

105-007

105-004

105-001

103-061

103-005

103-006

103-007

103-008

Price/Ft.

$28.21

31.79

33.15

27.21

29.52

33.28

20.89

12.94

16.45

29.99

29.83

Standard lengths: S and C Series: 2, 3, 31⁄2, 4, 5, 6, 7, 8, 9, 10, 11 and 12 feet. *(C-340 only available up to 10’). H Series: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet.

HANGERS AND ACCESSORIES Shipping Wt. (lbs.) Order Code Price Each

SC Hanger Supports finned element or bare tubing, permits .50 107-220 $4.61 15⁄16" expansion movement PC Hanger Supports bare or finned tubing PC-2—2" tube .50 108-172 8.08 Sems bolt 1⁄4-20 x 3⁄8 — 005-027 .18 M-1 Hanger Expansion hanger for installations without cover .75 108-173 6.92

Multi-Tier Bracket Aligns SC element hangers when used without cover M2 Bracket 1.00 108-177 8.01 M2 Bracket with two SC hangers 2.50 108-178 17.28 M3 Bracket 1.25 108-179 11.20 M3 Bracket with three SC hangers 3.50 108-180 24.88

Hanging Strip for Multi/Pak 93/95 (This strip is 15⁄8" wide) Sold in 4ft. lengths. 0.2/ft. 294-001 3.01/ft.

Hanging Strip for JL, JA and Multi/Pak 90 Used with hook braces where normal brackets 0.2/ft. 108-175 3.01/ft. cannot be used. Sold in 4ft. lengths.

Hook Brace for JL and JA slope top enclosures Used with hanging strip where normal brackets cannot be used .20 108-176 4.45

AC Adapter Bracket Permits adding cover to bare fin-tube installation without removing elements (Hanger not included) AC-10 .75 108-182 7.21 AC-14 1.00 108-183 7.21 AC-21 1.25 108-189 9.13 AC-28 1.50 108-185 11.11

Tamper-proof lock (JA-JL-90, R, JR, RR, RAG) Locks front cover to lower arm of bracket .03 108-181 7.14

Tamper-proof lock (93-95) Locks front cover to bracket .01 294-009 5.80

Wall gasketing 1.37 For dustproof seal between top of cover and wall .01 108-184 per linear ft. Architectural Aluminum Grille — 2, 3, 4, 5, 6, 7 & 8 ft lengths 295-249 29.56 ft.

12

90 SERIES

Multi/Pak® 90

Complete Fin-Tube Enclosure Package NU-WHITE ARCHITECTURAL ALUMINUM GRILLE OPTIONAL

Slope Top Design Unique 2-piece top-cover/front-cover simplifies handling and installation. Pre-painted Nu-White over galvanized steel, factory packaged, ready to install. Price includes brackets and hangers. Brackets and hangers are galvanized steel. Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Single tier, 14" high; two-tier, 21" high, 51⁄4" deep. For ratings see publication FT-10.

Custom Heights

and Configurations Available

COMPLETE ENCLOSURE ASSEMBLY*, knocked down. 18-ga. top cover, front cover. Includes wall brackets and SC hangers. 4.0/ft. — †185-100 $21.32/ft. 5.7/ft. †186-100 $32.75/ft.

COMPLETE ENCLOSURE ASSEMBLY*, with damper† 5.2/ft. — 185-117 31.65/ft. 6.9/ft. 186-117 43.09/ft.

COMPLETE ENCLOSURE ASSEMBLY WITH ALUMINUM GRILLE*, knocked down. 18-ga. sheet metal. Includes wall brackets and SC hangers. Not available with damper. ∆ 5.0/ft. — 185-124 50.65/ft. 6.7/ft. 186-124 62.05/ft.

Field installed damper kit, electro galvanized (not for aluminum grille) 1.2 — §180-007 10.43/ft. 1.2 §180-007 10.43/ft. End cap, telescopic 3" 2.0 12 (R)185-101 25.26 2.7 (R)186-101 29.13 (L)185-102 ((L)186-102 End cap, slotted telescopic 2.0 12 (R)185-103 28.31 2.7 (R)186-103 34.66 (L)185-104 (L)186-104

Splice plate, telescopic 3" 1.0 10 185-105 7.48 1.2 186-105 8.34 Filler sleeve, telescopic 71⁄2" 2.0 4 185-106 13.85 2.7 186-106 16.22 Inside corner, 90° telescopic 3.0 4 185-107 42.98 4.5 186-107 50.60 Inside corner ,135° telescopic 3.0 — 185-122 102.19 4.5 186-122 102.19 Outside corner, 90° telescopic 3.5 4 185-108 41.53 5.7 186-108 48.62 Outside corner,135° telescopic 3.5 — 185-123 102.19 5.7 186-123 102.19 Inside & Outside corner, custom angle — — — 104.73 — — 104.73 End valve cover, 10" 4.5 — (R)185-109 47.30 6.2 (R)186-109 53.75 telescopic (requires bracket)‡ (L)185-110 (L)186-110 End valve cover, slotted 10", 4.5 — (R)185-111 50.21 6.2 (R)186-111 59.18 telescopic (requires bracket)‡ (L)185-112 (L)186-112 Center valve cover, 10" 3.2 — 185-113 37.30 4.5 186-113 40.83 telescopic Column cover set 8.7 — 185-119 108.12 14.5 186-119 120.84

Top cover 1.7/ft. — 185-114 7.49/ft. 1.7/ft. 185-114 7.49/ft. Top cover with damper† 2.9/ft. — 185-116 17.91/ft. 2.9/ft. 185-116 17.91/ft. Top cover with alum. grille 2.7/ft. — 185-126 37.11/ft. 2.7/ft. 185-126 37.11/ft. Front cover 1.5/ft. — 185-115 8.52/ft. 2.5/ft. 186-115 11.70/ft. Back panel (galv.) 3.0/ft. — §107-028 8.40/ft. 4.0/ft. §107-049 10.79/ft.

Bracket (galv.) 1.5 §180-300 17.73 2.0 §180-301 26.29 with SC hangers Bracket (galv.) 1.0 §180-303 13.13 1.5 §180-304 17.06 SC hanger (galv.) 0.5 §107-220 4.61 0.5 §107-220 4.61 Internal splice plate 107-151 8.59 107-152 9.48

90-14 Single Tier 90-21 Two Tier

Ship Wt.

(lbs.)

Ship Wt.

(lbs.)Order Price Order Price

Packing/ Master Carton

* 2' through 5' lengths have 2 wall brackets and 2 unassembled “SC” hangers (4 SC hangers for 90-21).

6' through 8' lengths have 3 wall brackets and 3 unassembled “SC” hangers (6 SC hangers for 90-21).

† All items Nu-White baked enamel except back panels, brackets, dampers and SC hangers which are galvanized.

§ Back panels, brackets and SC hangers are galvanized. DECORATOR COLOR

ACCESSORY EXTRA must be added to these accessories if NU-WHITE or other decorator colors are required.

‡ One bracket required for each end

DECORATOR COLORS Standard Metallic** Standard Metallic** Set of front & top panel $6.29 $10.30 $8.63 $12.63 Back panel 7.44 11.45 9.76 13.80 Damper panel 2.98 6.00 2.98 6.00 Accessories (each) 7.17 10.17 8.54 11.55

90-14 90-21 Decorator Color charges: Color charges are by foot for cover & damper and per piece for accessories. No minimum order size for NuWhite color. Other colors have a 100 foot minimum order requirement or color set up charge of Trade Price $100.00, (Set up part #100-093) Nu-White offered 15% less than decorator colors. For standard decorator colors, request publication DSCG-10. ** Rubbed Bronze is a Metallic Color.

Note: Part numbers for cover shipped in Decorator Colors will be different than part numbers listed above. Non-std (custom) decorator color, consult factory

13

93 SERIES

Multi/Pak® 93

Complete Fin-Tube Enclosure Package NU-WHITE

Flat-Top Design, 31⁄2” deep. Unique 2-piece top-cover/front-cover simplifies handling and installation. Pre-painted Nu-White over galvanized steel, factory packaged, ready to install. Price includes brackets and hangers. Brackets and hangers are galvanized steel. Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Single tier, 93⁄4" high; two-tier, 163⁄4" high, 31⁄2" deep. For ratings see publication FT-10.

Custom Heights


COMPLETE ENCLOSURE ASSEMBLY, knocked-down 18 ga. top cover, front cover. Includes wall bracket and hangers*. — 4.0/ft. †171-100 $20.31/ft. 5.7/ft. †172-100 $31.20/ft. COMPLETE ENCLOSURE ASSEMBLY*, with damper† — 5.2/ft. 171-117 30.14/ft. 6.9/ft. 172-117 41.01/ft.

End cap, telescopic 33⁄16" 12 2.0 (R) 171-101 24.04 2.7 (R) 172-101 27.68 (L) 171-102 (L) 172-102 End cap, slotted telescopic 12 2.0 (R) 171-103 26.98 2.7 (R) 172-103 33.05 (L) 171-104 (L) 172-104

Splice plate, telescopic 3" 10 1.0 171-105 7.13 1.2 172-105 7.92 Filler sleeve, telescopic 10" 4 2.0 171-106 13.15 2.7 172-106 15.43 Inside corner, 90°, telescopic 4 3.0 171-107 40.95 4.5 172-107 48.17 Inside corner ,135° telescopic 4 3.0 171-122 102.19 4.5 172-122 102.19 Outside corner, 90°, telescopic 4 3.5 171-108 39.59 5.7 172-108 46.28 Outside corner, 135°, telescopic 4 3.5 171-123 102.19 5.7 172-123 102.19 Inside & Outside corner custome angle — — — 104.73 — — 104.73

End valve cover, 10", — 4.5 (R) 171-109 45.04 6.2 (R) 172-109 51.23 telescopic (requires bracket)‡ (L) 171-110 (L) 172-110 End valve cover, slotted, 10", — 4.5 (R) 171-111 47.77 6.2 (R) 172-111 56.33 telescopic (requires bracket)‡ (L) 171-112 (L) 172-112

Center valve cover, 10", — 3.2 171-113 35.53 4.5 172-113 38.91 telescopic Column cover set — 8.7 171-119 102.70 14.5 172-119 115.54

Top cover — 1.7/ft. 171-114 7.17/ft. 1.7/ft. 171-114 7.17/ft. Top cover with damper† — 2.9/ft. 171-116 17.02/ft. 2.9/ft. 171-116 17.02/ft. Front cover — 1.5/ft. 185-115 8.52/ft. 2.5/ft. 186-115 11.70/ft. Back panel (galv.) — 1.12/ft. 294-031 6.65/ft. 1.92/ft. 294-032 11.96/ft. Hanging strip (galv.) — 0.2/ft. 294-001 3.01/ft. 0.2/ft. 294-001 3.01/ft.

93 bracket (galv.) with element support bracket 1.5 §170-001 17.73 2.0 §170-002 26.29 93 ES element support bracket 0.5 §293-002 4.61 0.5 §293-002 4.61 Bracket (galv.) 1.0 §293-195 13.13 1.5 §293-196 17.07


Ship Wt.

(lbs.)

Ship Wt.

(lbs.)Order Code

Order CodePrice Price


* 2' through 5' lengths have 2 wall brackets and 2 element support brackets (4 element supports for 93-17). 6' through 8' lengths have 3 wall brackets and 3 element support brackets (6 element supports for 93-17). † All items Nu-White baked enamel except brackets, dampers, ES and element supports which are galvanized. § Brackets, ES and element supports are galvanized. DECORATOR COLOR ACCESSORY EXTRA must be

added to this accessory if NU-WHITE or other decorator colors are required. ‡ One bracket required for each end valve cover.

DECORATOR COLORS Standard Metallic** Standard Metallic** Set of front & top panel $5.32 $9.30 $6.29 $10.30 Back panel 6.32 10.30 7.44 11.45 Damper panel 2.98 6.00 2.98 6.00 Accessories (each) 5.92 8.90 7.17 10.20

93-10 93-17Decorator Color charges: Color charges are by foot for cover & damper and per piece for accessories. No minimum order size for NuWhite color. Other colors have a 100 foot minimum order requirement or color set up charge of Trade Price $100.00, (Set up part #100-093) Nu-White offered 15% less than decorator colors. For standard decorator colors, request publication DSCG-10. ** Rubbed Bronze is a Metallic Color.


14

95 SERIES

Multi/Pak® 95

Complete Fin-Tube Enclosure Package NU-WHITE ARCHITECTURAL ALUMINUM GRILLE OPTIONAL

Flat-Top Design, 51⁄4” deep. Unique 2-piece top-cover/front-cover simplifies handling and installation. Pre-painted Nu-White over galvanized steel, factory packaged, ready to install. Price includes brackets and hangers. Brackets and hangers are galvanized steel. Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Single tier, 93⁄4" high; two-tier, 163⁄4" high, 51⁄4" deep. For ratings see publication FT-10.

Custom Heights


COMPLETE ENCLOSURE ASSEMBLY, knocked-down. 18 ga. top cover, front cover. Includes wall bracket and hangers*. — 4.0/ft. 174-100 $21.32/ft. 5.7/ft. 175-100 $32.75/ft. COMPLETE ENCLOSURE ASSEMBLY*, with damper† — 5.2/ft. 174-117 31.65ft. 6.9/ft. 175-117 43.09/ft. COMPLETE ENCLOSURE ASSEMBLY WITH ALUMINUM GRILLE*, knocked-down. 18 ga. sheet metal. Includes wall bracket and SC hangers*. Not available with damper. ∆ — 5.0/ft. 174-124 $50.65/ft. 6.7/ft. 175-124 62.05/ft.

End cap, telescopic 33⁄16" 12 2.0 (R) 174-101 25.26 2.7 (R) 175-101 28.98 (L) 174-102 (L) 175-102 End cap, slotted telescopic 12 2.0 (R) 174-103 28.31 2.7 (R) 175-103 34.66 (L) 174-104 (L) 175-104

Splice plate, telescopic 3" 10 1.0 174-105 7.48 1.2 175-105 8.54 Filler sleeve, telescopic 10" 4 2.0 174-106 13.85 2.7 175-106 16.22 Inside corner, 90°, telescopic 4 3.0 174-107 42.98 4.5 175-107 50.60 Inside corner ,135° telescopic 4 3.0 171-122 102.19 4.5 172-122 102.19 Outside corner, 90°, telescopic 4 3.5 174-108 41.53 5.7 175-108 48.62 Outside corner, 135°, telescopic 4 3.5 174-123 102.19 5.7 175-123 102.19 Inside & outside corner custom angle — — — 104.73 — — 104.73

End valve cover, 10", telescopic (requires bracket)‡ — 4.5 (R) 174-109 47.30 6.2 (R) 175-109 53.75 (L) 174-110 (L) 175-110 End valve cover, slotted, 10", telescopic — 4.5 (R) 174-111 50.21 6.2 (R) 175-111 59.18 (requires bracket)‡ (L) 174-112 (L) 175-112 Center valve cover, 10", telescopic — 3.2 174-113 37.30 4.5 175-113 40.83 Column cover set — 8.7 174-119 108.12 14.5 175-119 120.84

Top cover — 1.7/ft. 174-114 7.49/ft. 1.7/ft. 174-114 7.49/ft. Top cover with damper† — 2.9/ft. 174-116 17.91/ft. 2.9/ft. 174-116 17.91/ft. Top cover with alum. grille — 2.7/ft. 174-126 37.11/ft. 2.7/ft. 174-126 37.11/ft. Front cover — 1.5/ft. 185-115 8.52/ft. 2.5/ft. 186-115 11.70/ft. Back panel (galv.) — 1.12/ft. 294-031 6.65/ft. 1.92/ft. 294-032 11.96/ft. Hanging strip (galv.) — 0.2/ft. 294-001 3.01/ft. 0.2/ft. 294-001 3.01/ft.

95 bracket (galv.) with SC hanger: for stamped grille 1.5 §170-004 17.73 2.0 §170-005 26.29 for aluminum grille 1.5 §170-014 17.73 2.0 §170-015 26.29 Bracket (galv.): for stamped grille 1.0 §295-195 13.13 1.5 §295-196 17.06 or aluminum grille 1.0 §170-024 13.13 1.5 §170-025 17.06 95 SC-2 bracket (galv.) 0.5 §107-420 4.61 0.5 §107-420 4.61


Ship Wt.

(lbs.)

Ship Wt.

(lbs.)Order Code

Order CodePrice Price


* 2' through 5' lengths have 2 wall brackets and 2 unassembled “SC” hangers (4 SC hangers for 95-17). 6' through 8' lengths have 3 wall brackets and 3

unassembled “SC” hangers (6 SC hangers for 95-17). † All items Nu-White baked enamel except brackets, dampers, SC hangers

and element supports which are galvanized.

∆ 3-1/2' length not available with aluminum grille. § Brackets, SC hangers and element supports are galvanized. DECORATOR

COLOR ACCESSORY EXTRA must be added to this accessory if NU-WHITE or other decorator colors are required.

‡ One bracket required for each end valve cover.

DECORATOR COLORS Standard Metallic † Standard Metallic † Set of front & top panel $5.32 $9.30 $6.29 $10.30 Back panel 6.32 10.30 7.44 11.45 Damper panel 2.98 6.00 2.98 6.00 Accessories (each) 5.92 8.90 7.17 10.20

95-10 95-17Decorator Color charges: Color charges are by foot for cover & damper and per piece for accessories. No minimum order size for NuWhite color. Other colors have a 100 foot minimum order requirement or color set up charge of Trade Price $100.00, (Set up part #100-093) Nu-White offered 15% less than decorator colors. For standard decorator colors, request publication DSCG-10. † Rubbed Bronze is a Metallic Color.


15

Baseboard Accessories

Item Packing Per Master Carton

Ship Wt. (lbs.)

Order Code

Price Each

Riser rings 12 5.3 101-027 $25.69 per dozen

Wire hanger for Fine/Line 30 (to support bare tube or return pipe) 144 1.0 101-026 $133.56

per gross

Touch Up Paint (for Slant/Fin stock, Nu-White color)


Ship Wt.

Order Code

Price Each

Nu-White Touch-up mini bottle w/brush 12 .6 oz 102-652-000 $9.66

Nu-White Touch-up spray paint, 4.5 oz. can 12 9.5 oz 102-650-000 $9.66

Touch Up Paint (for custom painted material)


Ship Wt.

Order Code

Price Each

Shell White (#S-41) * 12 4.5 oz Spray 101-030-000 $29.75

Almond * 12 4.5 oz Spray 107-189-000 $29.75

Mineral Bronze * 12 4.5 oz Spray 107-188-000 $29.75

Chocolate * 12 4.5 oz Spray 107-199-Z00 $29.75

Chestnut * 12 4.5 oz Spray 107-199-Y00 $29.75

Architectural Bronze * 12 4.5 oz Spray 107-199-U00 $29.75

Rubbed Bronze * 12 4.5 oz Spray 107-186-000 $29.75

Corvel Gray * 12 4.5 oz Spray 101-030-020 $29.75

Cloud Grey * 12 4.5 oz Spray 107-185-000 $29.75

Mirror Black * 12 4.5 oz Spray 107-183-000 $29.75

Flat Black * 12 4.5 oz Spray 107-184-000 $29.75

Brite White * 12 4.5 oz Spray 107-182-000 $29.75

* Ground transportation only

Brite White Touch-up mini bottle w/brush 12 .6 oz 102-653-000 $12.72

SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600 To order by fax: (516) 484-2694 • To email orders: [email protected]

www.slantfin.com

©Slant/Fin Corp. 2019 • Printed in the U.S.A. 319 • Publication No. R-01

Prices in U.S. Dollars For trade prices on additional Slant/Fin products, refer to... Slant/Fin Commercial Radiation — Publication No. R-01C

Slant/Fin Boilers — Publication No. B-01 Slant/Fin Boiler Parts – Publication No. BP-01

Revital/Line Replacement Covers easily slip right over existing baseboard back panels, breathing new life into aging baseboard! It couldn’t be simpler! What’s more, our replacement covers have been laboratory tested to allow for, up to 40% more heat output than competitive replacement brands on the market today. Revital/Line fits over 90% of standard residential baseboard, measuring up to 8.5” H x 3” D, Ours and theirs! Contact your local representative or go to our website to find out more about this exciting new product!

®

Revital/Line is available in eleven decorator colors!Revital/Line Replacement Covers are for use with hydronic baseboard only.

No tools needed for most installations! Slips right over existing back panel!

Laboratory tested for maximum heat output!

Made from Recycled Aluminum!

slant/fin radiationslant/fin radiation trade price book june 15, 2018 revised: march 1, 2019...

Documents