slater plastic boxes - womack electric › wp-content › uploads › 2011 › 05 › p-s... ·...

4 Auto/Clamps® oneach end eliminate

the need for separatecable clamps. See

Page P-14 for details.

P-1

Sla

ter

®Pla

stic Boxe

sSlater® Plastic Boxes

Durable, impact-resistant thermoplastic boxes in a full range of sizes — complemented by innovative extras that cut installation time.

Easy installation,rectangular cutout.

S3-52-W3 Gang Old Work Box shown withDivider Plate, LVDIV-1

Metal swing bracketfor quick mounting in

existing walls.

Quick/Click® featuresecures devices quickly

and easily. Does not strip when over-torqued.

See Page P-14 for details.

Big 52 cubic inch capacity.

Index

Device Page NumberSwitch & Outlet Boxes P-2, P-3Old Work Boxes & Shallow Boxes P-4Low-Voltage Brackets P-5Wood & Steel Stud Bracket Boxes P-6Screw Mount Steel Stud Boxes P-74" Square Boxes & Covers P-8Contractor Packs P-94" Round Ceiling Boxes P-10 – P-12Round Ceiling Boxes P-13Floor Box Assembly P-14Applications & Product Features P-15 – P-17

Divider plate (LVDIV-1, sold separately) used wheninstalling line and low-voltagedevices or multiple 277 voltdevices in same box. See Page P-5 for details.

Swing bracketadjusts from 11⁄4" to 1⁄8".

S2-35-RACMH

EXT2

EXT1

Sw

itch

&O

utl

et

Boxe

s

P-2

Sla

ter®

Pla

stic

Boxe

s

All devices listed on this page conform to NEMA OS2.

Slater® Plastic BoxesSwitch & Outlet BoxesWith Captive Mounting Nails on Each End with Quick/Click®

S3-54-RAC S4-68-RAC

S1-18-R

Catalog Cu. In. Dimensions (inches) Wire Fill Qty. PerNumber Vol. Description L W D (AWG) Carton

Switch & Outlet Boxes with Quick/Click®

S1-18-R 18.0 Single gang. 33⁄4 21⁄4 223⁄32 9 No. 14 1002 Quick/Entries® each end. 8 No. 12

7 No. 10

S2-35-RAC 35.0 Two gang. 331⁄32 331⁄32 33⁄8 17 No. 14 504 Auto/Clamps® each end. 15 No. 12

14 No. 10

S2-35-RACMH 35.0 Two gang. 4 Auto/Clamps 33⁄4 41⁄16 3 17 No. 14 100each end. 3" depth for 15 No. 12manufactured housing walls. 14 No. 10

S3-54-RAC 54.0 Three gang. 331⁄32 525⁄32 3 27 No. 14 506 Auto/Clamps each end. 24 No. 12

21 No. 10

S4-68-RAC* 68.0 Four gang. Rear stabilizing bar 313⁄16 713⁄16 3 34 No. 14 25virtually eliminates inward movement. 30 No. 126 Auto/Clamps each end. 27 No. 10

Deep Switch & Outlet Boxes with Quick/ClickS1-22-R 22.5 Single gang deep. 2 Quick/Entries 33⁄4 21⁄4 33⁄8 11 No. 14 100

each end. Extra deep for dimmers, 10 No. 12GFCIs and thermostats, yet 9 No. 10suitable for 2 x 4 construction.

Catalog Cu. In. Qty. PerNumber Vol. Description Carton

Wall Box Extension RingsEXT1 1.0 Single gang. 1/4" thick. Stackable. 10

EXT2 1.0 Two gang. 1/4" thick. Stackable. 10

All boxes are UL Listed.UL Classified for 2 Hour Fire Resistance (*Does not apply to Catalog Number S4-68-RAC).

S2-35-RAC

S1-22-R

P-3

Sw

itch &

Outle

t Boxe

sSla

ter

®Pla

stic Boxe

s


Slater® Plastic BoxesSwitch & Outlet Boxes

With Captive Mounting Nails on Each End

P1-18-R

P1-22-RN

P3-54-RACMH


Switch & Outlet Boxes with Threaded Mounting HolesP1-18-R 18.0 Single gang. 2 Quick/Entries® 33⁄4 21⁄4 223⁄32 9 No. 14 100

each end. 8 No. 127 No. 10

P1-18-RN 18.0 Single gang. Reverse angled captive 33⁄4 21⁄4 223⁄32 9 No. 14 100mounting nail. 2 Quick/Entries each 8 No. 12end. Used for manufactured housing. 7 No. 10

P1-22-C 22.0 Single gang. With “claw” – 33⁄4 21⁄4 4 11 No. 14 100a temporary hold feature. 10 No. 12

9 No. 10

PH1-22-R 22.0 Single gang. Horizontal. Captive 33⁄4 21⁄4 37⁄8 11 No. 14 100mounting nail each side. 10 No. 12

9 No. 10

P2-35-RAC 35.0 Two gang. 4 Auto/Clamps® each end. 331⁄32 331⁄32 33⁄8 17 No. 14 10015 No. 1214 No. 10

P2-35-RACMH 35.0 Two gang. 4 Auto/Clamps each end. 331⁄32 331⁄32 3 17 No. 14 1003" depth for manufactured housing 15 No. 12walls. 14 No. 10

P3-54-RACMH 54.0 Three gang. 6 Auto/Clamps each 313⁄16 515⁄16 31⁄16 27 No. 14 50end. 31⁄16" depth for manufactured 24 No. 12housing walls. 21 No. 10

Deep Switch & Outlet Boxes with Threaded Mounting HolesP1-22-R 22.5 Single gang deep. 2 Quick/Entries 33⁄4 21⁄4 33⁄8 11 No. 14 100

each end. Extra deep for dimmers, 10 No. 12GFCIs and thermostats, yet 9 No. 10suitable for 2 x 4 construction.

P1-22-RN 22.5 Single gang deep. Reverse angled 33⁄4 21⁄4 33⁄8 11 No. 14 100captive mounting nail. 2 Quick/Entries 10 No. 12each end. Extra deep for dimmers, 9 No. 10GFCIs and thermostats, yet suitable for 2 x 4 construction.

P1-22-N 22.5 Single gang deep. Vertical 33⁄4 21⁄4 33⁄8 11 No. 14 100bracket mount. 10 No. 12

9 No. 10

P1-18-RN

P1-22-R

PH1-22-R P1-22-C

P2-35-RAC P2-35-RACMH

NEW

NEW

NEW

All boxes are UL Listed.UL Classified for 2 Hour Fire Resistance.

P1-22-N

Old

Work

& S

ha

llow

Boxe

s

P-4

Sla

ter®

Pla

stic

Boxe

s


Slater® Plastic BoxesOld Work Boxes & Shallow Boxes

All boxes are UL listed.

S1-18-W

S2-32-W


Old Work Switch & Outlet Boxes with Quick/Click®

S1-18-W 18.0 Single gang. Swing-bracket for mounting 323⁄32 21⁄4 31⁄32 9 No. 14 100adjusts from 11⁄4" down to 1⁄8". 8 No. 122 Auto/Clamps® each end. 7 No. 10

S2-32-W 32.0 Two gang. Swing-bracket for mounting 323⁄32 41⁄16 31⁄32 16 No. 14 50adjusts from 11⁄4" down to 1⁄8". 14 No. 124 Auto/Clamps each end. 12 No. 10

S3-52-W 52.0 Three gang. Swing-bracket for mounting 323⁄32 57⁄8 31⁄32 26 No. 14 10adjusts from 11⁄4" down to 1⁄8". 23 No. 126 Auto/Clamps each end. 20 No. 10

Deep Old Work Switch & Outlet Boxes with Quick/ClickS1-22-W 22.0 Single gang deep. Swing-bracket for 323⁄32 25⁄16 31⁄2 – 50

mounting adjusts from 11⁄4" down to 1⁄8".2 Auto/Clamps each end.

Shallow Switch & Outlet Boxes for use in limited depth applicationsP1-08-W 8.0 Single gang. Old work flange box for 33⁄4 25⁄16 11⁄8 – 20

retrofit applications.

P1-08-N 8.0 Single gang. With vertical side bracket 33⁄4 25⁄16 11⁄8 – 20for new construction applications.

S3-52-W

S1-22-W

P1-08-WP1-08-N

P-5

Low

-Volta

ge B

rack

ets

Sla

ter

®Pla

stic Boxe

s


Slater® Plastic BoxesLow-Voltage Brackets

P1-00-ND

P1-00-WD

LVDIV-1


Low-Voltage Brackets for class 2 low-voltage applicationsP1-00-WD 8.0 Single Gang. Gangable. 323⁄32 2 – – 15

Swing bracket for mounting, adjusts from 11⁄4" down to 1⁄8", for old work, stand alone applications.

P1-00-ND 8.0 Single gang. With vertical side bracket c 23⁄8 11⁄4 – 15for new construction, with wire retaining fingers.

DV2B* 22.5 Two gang. For dual voltage. 33⁄4 4 33⁄4 11 No. 14 12Face mount box and bracket for 10 No. 12new construction. 9 No. 10

PLV1R* – Single gang. 33⁄4 21⁄4 – – 12Nail on for new construction.

PLV1S* – Single gang. 33⁄4 21⁄4 – – 12Screw on for new construction.

PLV1B* – Single gang. 33⁄4 21⁄4 – – 12Face mount bracket for new construction.

PLV2B* – Two gang. 33⁄4 4 – – 12Face mount bracket for new construction.

PLV1W* – Single gang. 33⁄4 21⁄4 – – 12Swing bracket mount for old work.

PLV2W* – Two gang. 33⁄4 4 – – 12Swing bracket mount for old work.

Divider PlateLVDIV-1 -.5 Suitable for low-voltage or multiple 277V – – – – 12

devices. For use with S2-35-RAC, S2-35-RACS, P2-35-RAC, S2-35-S50AC,S3-54-RAC, and S3-52-W.

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

All boxes are UL listed.

*Available Spring 2006.

Wood

&Ste

el Stu

d B

rack

et

Boxe

s

P-6

Sla

ter®

Pla

stic

Boxe

s


Slater® Plastic BoxesWood & Steel Stud Bracket BoxesWith Offset Bracket for Wood and/or Steel Mounting

S4-68-S50AC

All boxes are UL Listed.*UL Classified for 2 Hour Fire Resistance.



Wood & Steel Stud Bracket Boxes with Quick/Click®

S1-18-S50* 18.0 Single gang. 3⁄8" offset for wood and 33⁄4 21⁄4 2 23⁄32 9 No. 14 100steel stud mounting. 2 Quick/Entries® 8 No. 12each end. For use with 3⁄8" to 5⁄8" 7 No. 10wallboard.

S1-18-B50* 18.0 Single gang. 1⁄2" offset for wood and 33⁄4 21⁄4 23⁄4 9 No. 14 100steel stud mounting. Rear stabilizing 8 No. 12bar virtually eliminates inward 7 No. 10movement. 2 Quick/Entries each end. For use with 3⁄8" to 5⁄8" wallboard.

S2-35-S50AC* 35.0 Two gang. 3⁄8" offset for wood and steel 331⁄32 331⁄32 33⁄8 17 No. 14 50stud mounting. 4 Auto/Clamps® each 15 No. 12end. For use with 3⁄8" to 5⁄8" wallboard. 14 No. 10

S3-54-S50AC* 54.0 Three gang. 3⁄8" offset for wood and steel 331⁄32 525⁄32 3 27 No. 14 25stud mounting. 6 Auto/Clamps each end. 24 No. 12For use with 3⁄8" to 5⁄8" wallboard. 21 No. 10

S4-68-S50AC 68.0 Four gang. 3⁄8" offset for wood and steel 313⁄16 713⁄16 3 34 No. 14 25stud mounting. Rear stabilizing bar 30 No. 12virtually eliminates inward movement. 27 No. 106 Auto/Clamps each end. For use with 3⁄8" to 5⁄8" wallboard.

Deep Wood & Steel Stud Bracket Boxes with Quick/ClickS1-22-S50* 22.5 Single gang deep. 3⁄8" offset for wood 33⁄4 21⁄4 33⁄8 11 No. 14 100

andsteel stud mounting. 2 Quick/ 10 No. 12Entries each end. For use with 3⁄8" to 9 No. 105⁄8" wallboard.


Steel Stud Bracket BoxesP1-22-B* 22.0 Single gang. 1⁄2" offset for steel stud 33⁄4 21⁄4 41⁄4 11 No. 14 100

mount only. 2 stabilizer legs. 10 No. 129 No. 10

PH1-22-B* 22.0 Single gang. Horizontal. 1⁄2" offset for 33⁄4 21⁄4 37⁄8 11 No. 14 100steel stud mount only. 2 stabilizer legs. 10 No. 12

9 No. 10

S1-18-B50

S1-22-S50

S2-35-S50AC

S3-54-S50AC

S1-18-S50

PH1-22-BP1-22-B

NEW

All boxes are UL Listed.

*UL Classified for 2 Hour Fire Resistance.


Screw Mount, Steel Stud Boxes with Quick/Click®

S1-18-RS* 18.0 Single gang. 2 Quick/Entries® 33⁄4 21/4 223⁄32 9 No. 14 100each end. 8 No. 12

7 No. 10

S2-35-RACS* 35.0 Two gang. 4 Auto/Clamps® each end. 331⁄32 331⁄32 33⁄8 17 No. 14 5015 No. 1214 No. 10

S2-35-RACSMH* 35.0 Two gang. 4 Auto/Clamps® each end. 33⁄4 41⁄16 3 17 No. 14 1003" depth for manufactured housing 15 No. 12walls. 14 No. 10

S3-54-RACS* 54.0 Three gang. 6 Auto/Clamps 331⁄32 525⁄32 3 27 No. 14 50each end. 24 No. 12

21 No. 10

S4-68-RACS 68.0 Four gang. 6 Auto/Clamps each end. 313⁄16 713⁄16 3 34 No. 14 25Rear stabilizing bar virtually 30 No. 12eliminates inward movement. 27 No. 10

Deep Screw Mount, Steel Stud Boxes with Quick/ClickS1-22-RS* 22.5 Single gang deep. 2 Quick/Entries 33⁄4 2 1/4 33⁄8 11 No. 14 100

each end. Extra deep for dimmers, 10 No. 12GFCIs and thermostats, yet suitable 9 No. 10for 2 x 4 construction.

Catalog Qty. PerNumber Description Carton

Crimping Tool for Attaching Steel Stud Boxes

CT-1 Crimping tool for attaching boxes to steel studs. Comes equipped 1with long and short anvils to meet most installation requirements.

P-7

Scre

w M

oun

t Ste

el S

tud

Boxe

sSla

ter

®Pla

stic Boxe

s


Slater® Plastic BoxesScrew Mount Steel Stud Boxes

With Captive Combo Head Self Tapping Mounting Screws on Each End

CT-1

S1-18-RS

S1-22-RS

S3-54-RACS

S2-35-RACSMH

S4-68-RACS

S2-35-RACS


Range & Dryer Boxes*P2-42-SRD 42.0 1/2" offset for steel stud mount only 33⁄4 4 4 16 No. 10 12

with metal cable clamp. Captive 14 No. 8mounting screw each end. 8 No. 6

P2-42-RRD 42.0 1/2" offset for steel stud mount only 33⁄4 4 4 16 No. 10 12with metal cable clamp. Captive 14 No. 8mounting nail each end. 8 No. 6


S44-35-RACS44-21-SAC S44-35-SAC


Covers for 4" Square Boxes4SBC – 4" square flat blank cover - gray 41⁄4 41⁄4 N/A – 50

4SBCW – 4" square flat blank cover - white 41⁄4 41⁄4 N/A – 50

RC-1* 3.2 Single gang device cover, raised 3⁄8" 41⁄4 41⁄4 3⁄8 – 100

RC-2* 5.3 Two gang device cover, raised 3⁄8" 41⁄4 41⁄4 3⁄8 – 100

4" Square Boxes with Threaded Mounting Holes*S44-18-BAC 17.0 Shallow 4" square. Captive mounting 41⁄4 41/4 11⁄4 9 No. 14 50

nail each end. 2 Auto/Clamps® each end. 8 No. 122 #8 mounting screws factory installed. 7 No. 10

S44-21-RAC 21.0 4" square. Captive mounting nail each 41⁄4 41⁄4 11⁄2 10 No. 14 100end. 3 Auto/Clamps® each end, 2 on 9 No. 12side opposite to nails. 2 #8 mounting 8 No. 10screws factory installed.

S44-21-SAC 21.0 4" square. For wood and steel stud 41⁄4 41⁄4 11⁄2 10 No. 14 50mounting. 3 Auto/Clamps each end, 9 No. 122 on side opposite bracket. 8 No. 102 #8 mounting screws factory installed.

S44-35-RAC 35.0 4" square. Captive mounting nail each 41⁄4 41⁄4 23⁄8 17 No. 14 50end. 3 Auto/Clamps each end, 2 on 15 No. 12side adjacent to nails. 2 #8 mounting 14 No. 10screws factory installed.

S44-35-SAC 35.0 4" square. For wood and steel stud 41⁄4 41⁄4 23⁄8 17 No. 14 50mounting. 3 Auto/Clamps each end, 15 No. 122 on side opposite bracket. 14 No. 102 #8 mounting screws factory installed.

NEW

All boxes are UL Listed.*UL Classified for 2 Hour Fire Resistance (pending).

NEW

4"

Sq

ua

re B

oxe

s &

Covers

P-8

Sla

ter®

Pla

stic

Boxe

s


Slater® Plastic Boxes4" Square Boxes & Covers

RC-2

S44-21-RAC

RC-1

4SBC

S44-18-BAC

P2-42-SRD

P2-42-RRD

P-9

Con

tracto

r Pa

cks

Sla

ter

®Pla

stic Boxe

s


Slater® Plastic BoxesContractor Packs



Switch & Outlet Boxes with Quick/Click®

S1-18-RCP* 18.0 Single gang. Captive mounting nail 33⁄4 21⁄4 223⁄32 9 No. 14 24each end. 2 Quick/Entries® each end. 8 No. 12

7 No. 10

S2-35-RACCP* 35.0 Two gang. Captive mounting nail 321⁄32 321⁄32 33⁄8 17 No. 14 8each end. 4 Auto/Clamps® each end. 15 No. 12

1 No. 10

Deep Switch & Outlet Boxes with Quick/ClickS1-22-RCP* 22.5 Single gang deep. Captive mounting 33⁄4 21⁄4 33⁄8 11 No. 14 16

nail each end. 2 Quick/Entries each 10 No. 12end. Extra deep for dimmers, GFCIs 9 No. 10and thermostats, yet suitable for 2 x 4 construction.

Wood & Steel Stud Bracket Boxes with Quick/ClickS1-18-S50-CP* 18.0 Single gang. 3⁄8" offset for wood and 33⁄4 21⁄4 223⁄32 9 No. 14 12

steel stud mounting. 2 Quick/Entries 8 No. 12each end. For use with 3⁄8" to 5⁄8" 7 No. 10wallboard.

Old Work Switch & Outlet Boxes with Quick/ClickS1-18-WCP 18.0 Single gang. Swing-bracket for 323⁄32 21⁄4 321⁄32 9 No. 14 12

mounting adjusts from 11⁄4" down to 1⁄8". 8 No. 122 Auto/Clamps each end. 7 No. 10

P-10

Sla

ter®

Pla

stic

Boxe

s Slater® Plastic Boxes

UL Listed for fanand fixture support.

Constructed of impact-resistantNoryl® thermoplastic, making it virtuallyunbreakable and non-conductive.

Auto Clamp® cable clampsmolded in — hold wiresecurely in box.

Depth-mounting gaugeat bottom of bracket helps you

align the box at the properdepth relative to the ceiling.

Large, 20.25 cubicinch capacity for extrawiring space.

Ringed nails fortighter grip.

S1-20-JFAN

Angled, rugged, metalmounting bracket safely andsecurely fastens fans or fixturesto the building structure.

Fan mountsdirectly tobracket throughbox with #10-32screws (provided).

Phillips-head screws(#10-32 x 3") mount thefan or fixture directly tothe metal bracket.

Dual mounting acceptsfans or fixtures with 2.75"or 3.5" straps.

S1-16-FAN

P-11

4" R

oun

d C

eilin

g B

oxe

sSla

ter

®Pla

stic Boxe

s


Slater® Plastic Boxes4" Round Ceiling Boxes

With Dual Threaded Mounting Holes

Impact-resistant Noryl®

means no ground wiring aswith metal boxes.

S1-20-JFAN

All boxes are UL listed.*UL Classified for 2 Hour Fire Resistance(**pending).Dual mounting accommodates both 2.75" and3.5" fixtures.

Catalog Cu. In. Dimensions (in.) Wires Qty. PerNumber Vol. Description Dia. Depth (AWG) Carton

Fan Boxes – Fan & Fixture Rated*S1-20-JFAN 20.25 Ceiling Fan Box – Premium Grade 4 23⁄16 10 No. 14 12

with integral fan mounting bracket and 9 No. 124 Auto/Clamps®. UL listed for fans up to 8 No. 1070 lbs./ fixtures up to 150 lbs.

S1-20-BFAN 20.25 Ceiling Fan Box – Construction Grade 4 23⁄16 10 No. 14 30with 4 Auto/Clamps. UL listed for fans up 9 No. 12to 70 lbs./ fixtures up to 70 lbs. 8 No. 10

S1-20-RFAN 20.25 Ceiling Fan Box – Standard Grade 4 23⁄16 10 No. 14 304 Auto/Clamps with 2 captive mounting nails. UL listed for fans up to 35 lbs./fixtures up to 50 lbs.

4" Round Direct Mount Ceiling Fan Boxes – Fan & Fixture Rated**S1-16-FAN 16 Ceiling Fan Box – with Direct Mount. 4 23⁄4 8 No. 14 12

UL Listed for fans up to 70 lbs, 7 No. 12fixtures up to 210 lbs. 6 No. 10

S1-09-FAN 9 Ceiling Fan Box – with Direct Mount. 4 21⁄4 4 No. 14 12Suitable for single or double joist. 4 No. 12UL Listed for fans up to 70 lbs, fixtures 3 No. 10up to 210 lbs.

Catalog Qty. PerNumber Description Carton

Covers for 4" Round Boxes4RBC 4" round flat blank cover - gray 50

4RBCW 4" round flat blank cover - white 50

S1-20-BFAN

4RBC

NEW

NEW

NEW

S1-20-RFANS1-09-FAN

Easy installation. One #10 x 11⁄4" screw holds the box at rough in. Twofactory-supplied #10 x 2" screws securethe fan or fixture through the box, directlyto the joist.

Screw lock holds screws in box until needed. No lost hardware and nobroken spiral saw bits.

UL Listed for fan andfixture support.

Mounts directly under a joist or on a joist

cross member.S1-16-FAN

S1-20-RAC

S1-20-JAC

S1-20-RGAC

S1-20-JGAC

All boxes are UL listed.UL Classified for 2 Hour Fire Resistance.Dual mounting accommodates both 2.75" and 3.5" fixtures.

Catalog Cu. In. Dimensions (in.) Wires Qty. PerNumber Vol. Description Dia. Depth (AWG) Carton

Ceiling Boxes – Fixture Rated for 50 lbs.S1-20-RAC 20.25 4" round. 2 captive mounting nails. 4 23⁄16 10 No. 14 50

4 Auto/Clamps. 9 No. 128 No. 10

S1-20-RGAC 20.25 4" round with ground lug. 2 captive 4 23⁄16 10 No. 14 50mounting nails. 4 Auto/Clamps. 9 No. 12

8 No. 10

S1-20-JAC 20.25 4" round. J-bracket with 2 captive 4 23⁄16 10 No. 14 50mounting nails. 4 Auto/Clamps. 9 No. 12

8 No. 10

S1-20-JGAC 20.25 4" round with ground lug. J-bracket 4 23⁄16 10 No. 14 50with 2 captive mounting nails. 9 No. 124 Auto/Clamps. 8 No. 10

S1-20-HAC 20.25 4" round. Bar-hanger adjusts to 16" 4 23⁄16 10 No. 14 50or 24" joist spacing. 4 Auto/Clamps. 9 No. 12

8 No. 10

S1-20-HGAC 20.25 4" round with ground lug. Bar-hanger 4 23⁄16 10 No. 14 50adjusts to 16" or 24" joist spacing. 9 No. 124 Auto/Clamps. 8 No. 10

S1-20-RACS 20.25 4" round. 2 captive mounting screws, 4 23⁄16 10 No. 14 504 Auto/Clamps. 9 No. 12

8 No. 10

4"

Roun

d C

eilin

g B

oxe

s

P-12

Sla

ter®

Pla

stic

Boxe

s


Slater® Plastic Boxes4" Round Ceiling BoxesWith Dual Threaded Mounting Holes

S1-20-HAC S1-20-RACSS1-20-HGAC

P-13

Roun

d C

eilin

g B

oxe

sSla

ter

®Pla

stic Boxe

s


Slater® Plastic BoxesRound Ceiling Boxes

C1-18-WAC

C1-18-WGAC

C1-18-RAC

C1-18-RGAC

C1-18-HACC1-18-HGAC

31⁄4" Round Ceiling Boxes – Fixture Rated for 50 lbs.

C1-18-RAC* 18.0 31⁄4" round. 2 captive mounting nails. 31⁄4 35⁄32 9 No. 14 504 Auto/Clamps. 8 No. 12

7 No. 10

C1-18-RGAC* 18.0 31⁄4" round with ground lug. 2 captive 31⁄4 35⁄32 9 No. 14 50mounting nails. 4 Auto/Clamps. 8 No. 12

7 No.10

C1-18-HAC* 18.0 31⁄4" round. Bar-hanger adjusts to 16" 31⁄4 35⁄32 9 No. 14 50or 24" joist spacing. 4 Auto/Clamps. 8 No. 12

7 No. 10

C1-18-HGAC* 18.0 31⁄4" round with ground lug. Bar-hanger 31⁄4 35⁄32 9 No. 14 50adjusts to 16" or 24" joist spacing. 8 No. 124 Auto/Clamps. 7 No. 10

Catalog Cu. In. Dimensions (in.) Wire Fill Qty. PerNumber Vol. Description Dia. Depth (AWG) Carton

33⁄4" Round Old Work Ceiling Boxes – Fixture rated for 20 lbs.

C1-18-WAC 18.0 33⁄4" round. Swing brackets for mounting 33⁄4 211⁄16 9 No. 14 50adjust from 11⁄4" down to 1⁄8". 4 Auto/ 8 No. 12Clamps®. Includes device mounting 7 No. 10holes.

C1-18-WGAC 18.0 33⁄4" round. With grounding lug. Swing 33⁄4 211⁄16 9 No. 14 50brackets for mounting adjust from 11⁄4" 8 No. 12down to 1⁄8". 4 Auto/Clamps. Includes 7 No. 10device mounting holes.

33⁄4" Round Old Work Ceiling Boxes – Fixture rated for 8 lbs.

C1-18-WACX 18.0 33⁄4" round. Same as C118WAC, 33⁄4 211⁄16 9 No. 14 50except without swing brackets, for 8 No. 12screw mounting into OSB or plywood. 7 No. 104 Auto/Clamps.

C1-18-WGACX 18.0 33⁄4" round. Same as C118WGAC, 33⁄4 211⁄16 9 No. 14 50except without swing brackets, for 8 No. 12screw mounting into OSB or plywood. 7 No. 104 Auto/Clamps.

Display Receptacle

1542-DR 15 125 Receptacle, brass plate and plug Brown 5-15R

UL listed in accordance with 314.27(e). Conforms to NEMA OS2.

UL listed in accordance with 314.27(e).

UL listed in accordance with 314.27(e) exception.

Rating NEMACatalog Number A. V. Description Color Config. No.

Floor Box Assembly

1542-FBA 15 125 Receptacle, brass plate, plug, gasket, Brown 5-15RO-ring, and metal 18 cu. in. box

2005 National Electrical Code® Section 314.27(e) Floor Boxes Boxes listed specifically for thisapplication shall be used for receptacles located in the floor. Exception: Boxes located in elevated floors of showwindows and similar locations where the authority having jurisdiction judges them to be free from physical damage,moisture, and dirt. Receptacles and covers shall be listed as an assembly for this type of location. The products used in this application are identified as display receptacles.

Features

■ Solid brass covered plate with matching flush fitting brass cap.

■ 15A, 125V receptacle made of durable thermoplastic.

■ UL and FSUL listed.

Features

■ Hinged door is removable and easily replaceable.■ Durable construction, impact and scratch resistant

PVC construction.■ Standard Decorator opening that accepts GFCI,

TVSS, DataCom or other Decorator devices.■ Auto/Clamps® and knockouts on both sides of box.■ Meets UL514(c) scrub water exclusion test.■ Threaded device mounting holes.

■ Simple mounting box, fits into a 4-3/4" holeand mounts with 3 screws included.

■ Ready for low-voltage wiring, drill guides onunderside of cover.

■ UL and CUL Listed.■ Captive screws on TM1542 series – screws

will not be lost – new.■ Made in USA.

NEMACatalog Number Description Color Config. No.

Floor Box

TM1542-BOX 38 cu. in., with knockouts and Auto/Clamps®, Gray 5-15R3 screws for mounting to floor.

Thermoplastic Covers

TM1542-W Includes 15A, 125V Decorator receptacle, White 5-15RTM1542-BR matching detachable and replaceable hinged Brown 5-15RTM1542-GRY door; threaded device-mounting holes; drill Gray 5-15RTM1542-N

guides for low-voltage poke-through holes;Paintable Gray 5-15R

TM1542-BKaccepts any Decorator device; mounts on

Black 5-15RTM1542-LA

carpeting, hardwood, linoleum, tile floors; Light Almond 5-15R4 mounting/leveling screws.

Brass Covers

TM1542-FM Low-profile cover requires minimum 3/8" Brass 5-15Rhardwood floor thickness.

TM1542-CF High-profile cover fits any floor finish – Brass 5-15Rincluding carpeting, linoleum, tile, etc.Both covers include a Brown 15A, 125V Decorator receptacle and will accept any Decorator device. Covers include captive screws to prevent loss.

Flo

or

Box A

ssem

bly

P-14

Pla

stic

Boxe

s Plastic BoxesFloor Box Assembly2 Pole, 3 Wire Grounding 15A, 125V

1542-DR

1542-FBA

3.015"

4.500"

1.675"

2.375"

2.750"

1.950"

4.500"

1.675"

2.375"

2.750"

1.825"

TM1542-BOX

TM1542-LA*

TM1542-FM

TM1542-CF*See available colors at left.

P-15

Ap

plica

tion

s &Pro

duct F

ea

ture

sSla

ter

®Pla

stic Boxe


Applications

Location Ribs

Location Ribs enable the installerto quickly and accurately maintaina 1/2" offset. Dual ribs also make it easy to keep the face of the boxparallel to the stud. The ribs are .450" long to reduce the chance of the box protruding beyond the 1/2"sheetrock.They project .080" to spanthe rounded edges of wood studs butwill not cause excessive canting of thebox when used with thinner wallboard.

Quick/Entry®

Speeds installation by eliminating need for toolsAnother time-saving idea is Quick/Entry,a method that allows you to pushstripped or unstripped non-metallic cableinto a single gang plastic box withoutremoving knock-outs. Jagged edgesusually formed in other boxes areeliminated. Staple wire to stud within 8" of the box [per NEC 314.17(c)] tocomplete installation.

Quick/Click®

Fast, easy, and secure installations.

The unique, labor-saving Quick/Click design secures the wiring devicequickly and easily. Simply push in the mounting screws with a screwdriverand turn the screw one turn.

With Quick/Click you cannot cross-thread or strip a device mountingscrew.

Wall boxes are tested for a minimum 100 lb. total device pull-outresistance.

How Quick/Click Works

The spring steel insert for quick mounting of switches and receptacles is a unique patented feature.(Refer to illustration.) Note how the spring acts as a locking ratchet and allows the screw to be pushed inand then tightened. The screw can only be released by unscrewing it in the conventional fashion.

Application

Slater Plastic Boxes, the Contractor’s Choice designed with unique labor-saving features, include a complete range of wall, ceiling, and old work boxes for commercialand residential construction applications.

UL Classified

All Slater Plastic Boxes are Underwriters Laboratories Listed. Slater Plastic Boxes shown that are UL Classified for Fire Resistance meet the requirements of UL263 and have a two hour fire resistance rating. These boxes may be used in fire resistantwalls and ceilings. Installation information for Slater Plastic Boxes Classified for FireResistance may be found in the UL Fire Resistance Directory under category CEYYfor Pass & Seymour/Legrand.

Product FeaturesExclusive Auto/Clamp®

Eliminates the need for separate cable clamps as well as the tools usually needed for installation.

Auto/Clamp is available on all multigang boxes, old work boxes, 4" square boxes, and 3-1/4" and 4" roundceiling boxes. A major installation advantage with Auto/Clamp is that the clamp is molded as an integral part of the box (there are no separate clamps and screws to install, adjust or tighten). Each cable openingcontains an Auto/Clamp, therefore, the non-metallic sheathed cable may be inserted where needed orwhere most convenient. Auto/Clamp does not take up as much room as conventional clamps, allowing more room for wire and devices – another important feature.

To install the cable, insert stripped or unstripped non-metallic wire into the Auto/Clamp opening and pullthrough to the desired length. The cable is automatically secured and the installation is complete. There areno other operations for the electrician to perform. Contractors can look forward to saving time and moneywith every Auto/Clamp plastic box installation.

Ap

plica

tion

s &

Pro

duct

Fea

ture

s

P-16

Sla

ter®

Pla

stic

Boxe

s Slater® Plastic BoxesApplications & Product Features

Screw Mount: Steel Stud BoxesApplication

Single, deep single, two, three, four gang, and 4" round ceiling boxes come withcombination Hex/Phillips washer head screws. They are designed to save laborand speed installation in steel stud construction. These innovative boxes are analternative to bracket boxes, and can also be used on wood studs. Thespecially designed drill point on the screw rapidly penetrates medium gaugesteel studs to securely fasten the box. Locator ribs 0.450" long help align thebox on the stud and insure correct mounting depth.

Features

• Available in single, single deep, two, three and four gang, and 4" round ceiling boxes.

• All multi-gang and ceiling boxes include exclusive Auto/Clamp feature.• Single gang include Quick/Entry feature.• Specially designed drill point rapidly penetrates medium gauge steel studs.• Screws have combination Hex/Phillips washer heads.• Quick/Click feature on wall boxes offers fast and dependable

installation of devices.• Can be used for steel, aluminum, or wood studs.• Molded of high-impact thermoplastic.• Locator ribs ensure proper alignment on stud and proper offset depth.

Wood & Steel Stud Bracket BoxesApplication

Single, two, three, four gang and 4" square wood and steel stud boxes feature Quick/Click®, the labor-saving device that assures quick anddependable installation of switches and receptacles. These high-impactthermoplastic boxes can be mounted quickly to steel or aluminum studs using the CT-1 Crimping Tool. They can also be mounted to wooden studswith common nails or screws.

On the single, two, three and four gang steel stud boxes, a steel mountingbracket is provided for mounting to the structural stud. The non-mounting sideof the two and four gang box has provisions for attachment to a short section ofstud (phantom stud), as shown in the illustration below, to give additional rigidityto the installation. This assembly may also be used without the phantom studas a positioning tab to automatically realign the box to the wallboard surface.The brackets are 3/8" offset to accommodate 3/8" to 5/8" thick wallboard.

Features

■ Available in single, two, three, four gang and 4" square boxes. Two, three and four gang boxes and 4" square include exclusive Auto/Clamp® feature.

■ Single gang include Quick/Entry® feature.

■ Quick/Click feature offers fast and dependable installation of devices (single, two, three and four gang).

■ Unique offset tab assures proper alignment to wall face. Available with 3/8" offsets.

■ Can be used for steel, aluminum, or wooden studs. Can be installed on steel studs with most standard crimping tools in addition to CT-1 Crimping Tool.

■ Molded of high-impact thermoplastic.

P-17

Ap

plica

tion

s &Pro

duct F

ea

ture

sSla

ter

®Pla

stic Boxe


Applications & Product Features

Standard Mounting Dimensions for Boxes

Standard Mounting Dimensions Round Boxes

3.281"

Box Volume Required

Total Conductor Cubic Inches Required For

Fill Count #14 Wire #12 Wire #10 Wire

1 2.0 2.25 2.502 4.0 4.50 5.003 6.0 6.75 7.504 8.0 9.00 10.005 10.0 11.25 12.50

6 12.0 13.50 15.007 14.0 15.75 17.508 16.0 18.00 20.009 18.0 20.25 22.50

10 20.0 22.50 25.00

11 22.0 24.75 27.5012 24.0 27.00 30.0013 26.0 29.25 32.5014 28.0 31.50 35.0015 30.0 33.75 37.50

16 32.0 36.00 40.0017 34.0 38.25 42.5018 36.0 40.50 45.0019 38.0 42.75 47.5020 40.0 45.00 50.00

In addition to counting 1 conductor fill allowance for eachconductor, 1 additional allowance must be counted for all cableclamps, and 1 additional allowance for all ground conductors. 2 additional fill allowances must be counted for each devicestrap. See 2002 NEC Section 314.16(b). The table abovedefines box volume required for resulting total conductor fillcount, depending on AWG used.

Old Work BoxesApplication Features

Old Work Boxes provide fast, easy installation of an electrical device in a finished (dry walled) area where no box existed before. Old Work Boxes include the Auto/Clamp® and Quick/Click®

features for convenient, labor-saving installations.

■ Box designed so mounting strap of the device, with plasterears removed, fits flush, allowing use of standard depth wallplate without unsightly gap between plate and wall surface.

■ Swing out wing brackets permit installation of box in wall with1-1/4" thick wallboard down to 1/8" thick paneling.

■ New longer swing brackets have greater reach to clamp ontooversized cutouts.

■ Made of high impact thermoplastic.■ Combination slotted/Phillips head swing bracket screws.■ Include exclusive Auto/Clamp feature.■ Wall boxes include exclusive Quick/Click feature.■ Available in ceiling box versions.

31⁄4" Round 33⁄4" Round 4" Round

2.75"

3.5"

3.5"

3.281"

3.281"

1.8125"

3.281"

1.8125"1.8125"

3.281"

1.8125"1.8125"

1.8125"

slater plastic boxes - womack electric › wp-content › uploads › 2011 › 05 › p-s... ·...

Documents