sliceplans

Upload: himani-gaur

Post on 07-Apr-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/3/2019 sliceplans

    1/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 11

    Slice TestingSlice Testing

    Priorities & PlansPriorities & Plans

  • 8/3/2019 sliceplans

    2/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 22

    OverviewOverview

    CPCP

    JEPJEP

    PPMPPM

    BackplaneBackplane

    9U ROD9U ROD

    Other ModulesOther Modules

    Test Beam SynchronisationTest Beam Synchronisation

  • 8/3/2019 sliceplans

    3/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 33

    CPCP

    CPCP

    A few remaining basic issues:A few remaining basic issues:

    Implement a maximum number of CPM configuration.Implement a maximum number of CPM configuration.

    Prepare checklist and revisit it:Prepare checklist and revisit it:

    Timing setup.Timing setup.

    BCNUM matching.BCNUM matching.

    Operation at minimal L1A separation.Operation at minimal L1A separation.

    Multi-slice operation.Multi-slice operation.

    Add a couple ofAdd a couple ofCPMsCPMs and we can start some realand we can start some real

    tests.tests. And one of these days, weAnd one of these days, well even have a PPM!ll even have a PPM!

  • 8/3/2019 sliceplans

    4/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 44

    JEPJEP

    Await new module:Await new module: UseUse JemJem 0.1 to debug0.1 to debug

    CMM firmware.CMM firmware. JET variant, in particular.JET variant, in particular.

    RoIRoI ReadOutReadOut and event matching.and event matching.

    JEM 1.0JEM 1.0

    Available Mid May, early June:Available Mid May, early June: Time to schedule tests soon.Time to schedule tests soon.

    Then:Then: Reintegrate with ROD, CMM.Reintegrate with ROD, CMM.

    When will a 2When will a 2ndnd JEM be available?JEM be available?

    Requirements:Requirements: Software.Software.

    6u ROD firmware for6u ROD firmware for RoIRoI..

    G-Link Optical-Electrical convertersG-Link Optical-Electrical converters

    Actual Status in terms of slice-test progress?Actual Status in terms of slice-test progress? SnookeredSnookered..

  • 8/3/2019 sliceplans

    5/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 55

    PPMPPM

    Early Front End integration:Early Front End integration: Needs to be scheduled in conjunction with JEM, CPMNeeds to be scheduled in conjunction with JEM, CPM

    To take place in Mainz ASAP.To take place in Mainz ASAP.

    Date to be agreed.Date to be agreed.

    Test beam in June:Test beam in June:

    Takes theTakes the front seatfront seat This by definition leaves slice tests in theThis by definition leaves slice tests in the back seatback seat..

    Multiple newMultiple new PPMsPPMs Available soon.Available soon.

    When will firmware be mature.When will firmware be mature.

    When will all the software components be available to allowWhen will all the software components be available to allowintegration?integration?

    Difficult to schedule when there are notDifficult to schedule when there are notmany dates to work from!many dates to work from!

    Middle June?Middle June?

  • 8/3/2019 sliceplans

    6/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 66

    BackplaneBackplane

    Backplane working groupBackplane working group

    established after Heidelberg.established after Heidelberg.

    Request for input from Sam.Request for input from Sam.

    Not much more activity, yet.Not much more activity, yet. Testing.Testing.

    Systematic work to proceed in BRUM.Systematic work to proceed in BRUM.

    Orthogonal series at RAL?Orthogonal series at RAL?

    Repair of bent pins.Repair of bent pins. Not yet demonstrated!Not yet demonstrated!

  • 8/3/2019 sliceplans

    7/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 77

    9U Rod9U Rod

    9U ROD9U ROD

    Just around the corner!Just around the corner!

    Something ready to plug-in in July.Something ready to plug-in in July.

    Software work needs to start soon.Software work needs to start soon.

  • 8/3/2019 sliceplans

    8/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 88

    Other ModulesOther Modules

    TCM &TCM & VMM:VMM:

    Are there tests which are missing orAre there tests which are missing or

    unfinished?unfinished?

    CAN.CAN. Reset functionality.Reset functionality.

    Clock integrity.Clock integrity.

    Dual-port use.Dual-port use.

  • 8/3/2019 sliceplans

    9/9

    April 27, 2004April 27, 2004 B.M. Barnett - RAL PPD - L1Calo UKB.M. Barnett - RAL PPD - L1Calo UK 99

    Test BeamTest Beam

    SynchronisationSynchronisation

    Commitments start in July:Commitments start in July:

    What Testing work can go on in parallel:What Testing work can go on in parallel: Largely JEM and 9U ROD. These will likely be lateLargely JEM and 9U ROD. These will likely be late

    arrivals to the test beam.arrivals to the test beam.

    Systematic CP tests from theSystematic CP tests from the checklistchecklist As a part of the programmeAs a part of the programme

    When beam not available.When beam not available.

    How to minimise disruption?How to minimise disruption? Do initial DAQ integration with DSS and ROD, asDo initial DAQ integration with DSS and ROD, as

    suggested at Heidelberg?suggested at Heidelberg?

    Delay shipping date. Then changeDelay shipping date. Then change modemode..