Slovenian Defence Products

www.mo.gov.si

Photo: Bruno Toič

FOREW

ORD

LONG INDUSTRIAL TRADITION, QUALITY AND INNOVATION

Trading in defence equipment in Slovenia is regulated by the Law on Defence and other legal acts requiring the producers of military weapons and equipment to register with the Ministry of Defence of the Republic of Slovenia. There are several ways potential custom-ers can contact the Slovenian producers of defence equipment, including by contacting the national de-fence industry association Slovenian Defence Indus-try Cluster.

This publication was prepared by the Slovenian De-fence Industry Cluster (GOIS) in cooperation with the Chamber of Commerce and Industry of Slovenia and the Ministry of Defence of Slovenia. It represents Slo-venian companies which provide high quality prod-ucts and services in the areas of defence, security and protection.

You can obtain more information about the Slovenian defence industry from:

GOIS Slovenian Defence Industry ClusterDimičeva 131504 LjubljanaSlovenia

T: +386 1 5898 423F: +386 1 5898 100E: info@giz-gois.siW: giz-gois.si

The Slovenian defence industry is based on a long Slovenian industrial tradition, engineering knowl-edge and mastery of craft. Strong export orientation, investments in knowledge, new technologies and the implementation of international standards have all shaped Slovenian industry in the last few decades. The country’s main export markets are the EU, South-East Europe and other world markets.

The production of military weapons and equipment is part of a tradition lasting several hundred years in the territory of Slovenia. The well-renowned Sloveni-an precision and craftsmanship are reflected in Slove-nian defence products that are distinguished by the inclusion of their own know-how, highest quality, in-novation and optimal performance-to-cost ratio.

Since joining NATO in 2004, interoperability and com-pliance with NATO standards have become the guiding principle of the development of new defence produc-tion programs in Slovenia. The cooperation among Slovenian enterprises, universities and research insti-tutes records a constant growth.

The close collaboration of the companies with the Standardisation, codification and quality assurance department of the Ministry of defence of Slovenia keeps the production of armaments and military equipment in accordance with up to date NATO AQAP series standards and manages product quality assur-ance during their life cycle.

The catalogue presents diverse products and servic-es. From solder equipment, handguns and light arm parts, ammunition, explosives storage and manipula-tion, CBRN defence, battlefield management, border control, telecommunication, unmanned systems, to diverse special technologies and engineering.

3

Products and services Company Page

1. Soldier Equipment ALPINA d.o.o.ANTHRON d.o.o.AREX d.o.o.MIL SISTEMIKA d.o.o.

789

36

2. Ammunition and Explosives AREX d.o.o. 9

IZOP-K d.o.o.SEANTECH L.t.d.

3439

3. Armaments and their parts AREX d.o.o. 9

4. Gun stabilization amplifiers VR-ELEKTRONIKA d.o.o. 44

5. Border monitoring systems and mobile surveillance systems

DAT-CON d.o.o. 15

6. Command and Control Systems MIL SISTEMIKA d.o.o 36

7. Chemical Biological, Nuclear protection (CBRN) EM.TRONIC d.o.o.ISKRA PIO d.o.o.

1827

8. Lifting systems for military and civil logistic BIJOL d.o.o. 11

9. Small unmanned systems (UAS/UAV) C-ASTRAL d.o.o. 13

10. Chemical Biological, Nuclear protection (CBRN) EM. TRONIC d.o.o. 18

11. Laboratory Equipment DOMEL d.o.o.EM.TRONIC d.o.o.ISKRA PIO d.o.o.

171827

12. Engineering Modelling and Design UNIVERSITY OF LJUBLJANA , FACULTY OF MECHANICAL ENGINEERING

22

13. Special production technologies FERROČRTALIČ d.o.o.SEANTECH L.t.d.ISKRA PIO d.o.o.

253927

14. Special Purpose Vehicles BIJOL d.o.o. 11

15. Telecommunication systems ISKRATEL d.o.o.S-TMM SISTEMI d.o.o.TRIVAL ANTENE d.o.o.

324143

TRIVAL ANTENE d.o.o. 43

S-TMM SISTEMI d.o.o. 41

16. Special yarns of high performance fibres PREDILNICA LITIJA d.o.o. 38

17. Training Aids and Devices EM.TRONIC d.o.o. 18

18. Cryogenic coolers for IR systems, Stirlig motors LE-TEHNIKA d.o.o. 35

19. Electric protection equipmnent ISKRA ZAŠČITE d.o.o. 30

20. Mobile water purification systems ARTOS GROUP d.o.o. 10

21. Explosives management, storage, testing and disposal

IZOP-K d.o.o. 34

22. Equipment for propellants production SEANTECH L.t.d. 39

4

ALPINA d.o.o. 7

ANTHRON d.o.o. 8

AREX d.o.o. 9

ARTOS GROUP d.o.o. 10

BIJOL d.o.o. 11

C-ASTRAL d.o.o. 13

DAT-CON d.o.o. 15

DOMEL d.o.o. 17

EM.TRONIC d.o.o. 18

UNIVERSITY OF LJUBLJANA, FACULTY OF MECHANICAL ENGINEERING 22

FERROČRTALIČ d.o.o. 25

ISKRA PIO d.o.o. 27

ISKRA ZAŠČITE d.o.o. 30

ISKRATEL d.o.o. 32

IZOP-K d.o.o. 34

LE-TEHNIKA d.o.o. 35

MIL SISTEMIKA d.o.o. 36

PREDILNICA LITIJA d.o.o. 38

SEANTECH L.t.d. 39

S-TMM SISTEMI d.o.o. 41

TIVAL ANTENE d.o.o. 43

VR-ELEKTRONIKA d.o.o. 44

CHAMBER OF COMMERCE AND INDUSTRY OF SLOVENIA 45

GOIS SLOVENIAN DEFENCE INDUSTRY CLUSTER 45

5

DEPA

RTM

ENT

OF

DEFE

NCE

REP

UBL

IC O

F SL

OVE

NIA

MINISTRY OF DEFENCE OF THE REPUBLIC OF SLO-VENIA carries out activities to support Slovenian de-fence industry and research and development institu-tions. It relates them to allied activities in the fields of manufacturing, research and development, the use of European and NATO standards, quality assurance and codification of products.

Activities of the Ministry of Defence in the field of research and development:

• It provides long-term support for capability goals of the Slovenian Armed Forces and development of new findings to contribute to a more efficient sys-tem of protection and rescue. It encourages scien-tific excellence in Slovenian scientific institutions. The results are usually not intended only for mil-itary use, but are also useful in the wider society. Dual use means that the results are useful for both military and civilian purposes.

• In invests international efforts within the EU and NATO in priority scientific areas identified by the NATO Organization for Science and Technology and the European Defence Agency.

The Ministry of Defence, therefore, encourages the de-velopment of scientific excellence, which in the long term contributes to increasing the capacity of the Slo-venian Army and the protection and rescue system in areas that are important for the Republic of Slovenia in the broader social context.

Activities of the Ministry of Defence in the field of standardization, codification and quality:

• It manages the standardization process in the de-fence system; issues Slovenian military standards; keeps record of Slovenian military standards and NATO standards; ensures their distribution to the internal professional public, government bodies and the industry.

• It represents the national authority of the govern-ment of quality assurance in the life cycle of ar-maments and military equipment in accordance with NATO standards series AQAP (Allied Quality Assurance Publications). It acts as a proxy for the implementation of acquisitions for the needs of other NATO member states and conducts audits of quality systems according to NATO standards of the series AQAP (Allied Quality Assurance Publications).

• Represents the National Codification Bureau within NATO; codifies products of Slovenian manufacturers (assignment of NSP - NATO Stock Number); assigns NATO codes of Slovenian manufacturers (NCAGE as-signment) and maintains a database of all codified means of supply of the Slovenian Armed Forces.

The Ministry of Defence also issues import, export and transit permits and authorisations for the transfer of defence-related products, and arranges registration of defence producers and traders in the Republic of Slovenia.

Ministry of DefenceVojkova cesta 55SI-1000 Ljubljana

W: www.mo.gov.siE: glavna.pisarna@mors.si

6

Military footwear

Alpina is a Slovene company with more than 65 years of tradition in development, manufacture and mar-keting of footwear. The brand Alpina is a guarantee for high quality manufacture, innovative solutions and user friendly design.

The wealth of experience in footwear production and development has been applied also to the manufac-turing of military boots. Alpina has been supplying the Slovene armed forces with military boots from very beginning and has been keeping up with the re-quirements and trends of a modern military. System-atic testing and high-tech development have enabled Alpina to develop high quality military footwear that meets the strict requirements and trials that a mod-ern military force is subjected to.

Technology on a mission

Work in army offers challenges along with harsh con-ditions and even accidents - untamed nature and haz-ardous areas are all hostile environments for a gentle, unprotected human foot. Under such conditions each day poses countless conflicts between the vulnerable nature of a foot and the demanding forces surround-ing it. ALPINA develops shoes that intervene in these conflicts as an ever-present, flexible, and caring force with one mission to accomplish: to help complete the mission while keeping feet safe and satisfied.

Carefully selected materials, anatomically designed footbed, firm rubber sole and protective toe cap in-sure extreme rigidity and comfort at the same time.

ALPINA D.O

.O.

Alpina d.o.o.Strojarska ulica 2SI-4226 Žiri

www.alpina.siwww.alpinasports.comalpina@alpina.siT: +386 4 5158000F: +386 4 5158370

7

ANTH

RON

D.O

.O. Anthron d.o.o.

Trgovska ulica 3SI-6310 Izola

T: +386 5 64 00 150F: +386 5 64 00 151E: info@anthron.si

Anthron is a small family owned company specialized in producing quality rope access and rescue equip-ment. The idea for the company sparkled in the wake of the 1977 earthquake when the founder Mr Jože Lor-bek pondered about efficient rescue systems for safe mass evacuations from high-elevation buildings. The original idea still represents the stance of the compa-ny’s orientation and rope access and rescue be it at work, sport or combat are at the heart of its strategic orientation. On one hand it supplies the global market with its standard products that span the range from descenders, rope clamps to an array of pulleys. On the other hand being small makes the company more flexible in responding to the needs of customers seek-ing equipment tailored for their specific applications.

The company holds representation for a number of worldwide sectorial producers such as: CMC Rescue, Bornack, Act Safe, Climbing Technology, Honeywell, Rock Exotica, Singing rock, Cresto and others.

In collaboration with special forces an interven-tion-centred descender DSDpro was developed and offered along with carefully chosen materials in a kit. It is the only descender on the market that can be ful-ly operated with one hand only. Contrary to most double stop descenders the press-stop function is emphasized making it operationally more intuitive and its gentle yet extremely strong grip on the rope means no creep. These features coupled with a strudy design, abrasion resistance and a ruberized finish make it virtually indestructible and make stealthy movement possible.

8

AREX D.O.O

. Arex d.o.o. Trubarjeva cesta 7SI-8310 Šentjernej

T: +386 7 393 34 50F: +386 7 393 34 51E: info@arex.siW: www.arex.si

PLASTIC BLANK AND DRILL AMMUNITION

METAL LINKS FOR NATO CALIBERS NLA PLASTIC AMMUNITION

MILITARY AND LAW ENFORCEMENT 9MM HANDGUN

FORGED BARREL PRODUCTION

9

ARTO

S GR

OU

P D.

O.O

. Artos Group d.o.o.Beethovnova 12SI-1000 Ljubljana

T: +386 (0)1 200 17 70F: +386 (0)1 200 17 72E: info@artos.siW: www.artos.si

Artos Group manufactures mobile water purification systems suitable for every water source (eg. lakes, rivers, seas). Water purification technology is based on two different principals of filtration: Ultrafiltration and Reverse Osmosis. These two methods provide clean and safe water, which is compliant with the strictest STANAG and WHO standards.

Along with custom made solutions, we are curently present in the market with two standard EWM models and RO Hybrid solution.

Distinguished quality features:• High capacity• Heavy duty design• Easy portability and mobility• Low operating costs• Energy eficiency• Chemical free technology• Automatic washing of the operation system • Simple use and maintenance

EWM 1500 and EWM 4000 tehnical features

EWM 1500 EWM 4000CAPACITY [l/h] 1.500 4.000

WEIGHT [kg] 77 320

DIMENSIONS [cm] 66 x 80 x 50 169 x 70 x 156

OPERATING PRESSURE 3 bar (300 kPa) 3 bar (300 kPa)

POWER CONSUMPTION 0.9 kW / h 1.6 kW / h

POWER TERMINAL [standard] 230 V / 50 Hz 230 V / 50 Hz

Serbian Armed Forces using EWM in May 2014 when their country was hit by the worst floods the last 120 years.

RO Hybrid 4000 - system which combines two membraneprocesses: Ultraltration and Reverse Osmosis.

EWM 4000M - high capacity mobile on-eld solution.

EWM 1500 successfully implemented at Floods Carinthia Drill.

EWM 1500 - has been proven an excellent solution in crisissituations.

10

Company Bijol d.o.o. was establish in 1996, with the main activity of representing, assembling and servic-ing cranes of the company Palfinger GmbH. Today the company employs 30 full-time employed workers and some contract workers.

Headquarter of the company

Company Palfinger with headquarters in Salzburg, Austria is well known manufacturer of lifting-loading equipment. Palfinger’s loading technology is powerful because of its excellent kinematics and geometry of mobility. Palfinger’s products are improved again and again with numerous patents and innovations, so that the company has proven itself and gained an impor-tant role as an innovator in the development of lifting techniques.

The largest share in the firm’s business have truck mounted knuckle-boom cranes Palfinger and timber and recycling cranes Palfinger Epsilon. The company’s program also consist of tail lifts, aerial work platforms, container handling systems, transportable forklifts, for special transport dedicated trailers and also for the needs of army. Among mentioned Palfinger Company, Bijol d.o.o. also represents other companies such as Doll, Exte, Stepa, Huffermann, Sennebogen …

In 2004, the company Bijol d.o.o. gained first business for the Slovenian army on the public competition in cooperation with company Dumida d.o.o. Within that year a new assembly-services workshop specifically for projects in the military industry was built. In 2006 the company also renovated other production facili-ties and built new offices.

First project for Slovenian army was relatively large; it consisted of assembling 48 container handling sys-tems Palfinger Palift on the trucks Mercedes Benz.

PALIFT hook loader on Mercedes-Benz

This project was followed by number of others such as, purchasing knuckle-boom cranes with baskets for decontamination of vehicles, purchase of special transportable forklifts Palfinger Crayler and also radar systems for which the basics of hydraulic lifting and descending was constructed and manufactured in company Bijol d.o.o. The cooperation between Slove-nian Army and Bijol d.o.o., was not closed with those projects. The company still provides regular services and maintenance.

Company Bijol has relatively large range of activity, so each customer from this technical field can find something suitable. Company’s staff listens to their customers, advise them and offer quick and efficient services

BIJOL D.O

.O.

BIJOL d.o.o.Livarska cesta 17SI-2367 Vuzenica

T: +386 2 8790 156 +386 2 8790 157F: +386 2 8790 158 M: +386 41 614 345W: www.bijol.siE: bijol@bijol.si

11

BIJO

L D.

O.O

.

Our references from Military program:

Loader crane on the Military shipLoader crane

Working basket for Decontamination system

PALIFT load handling solutions

Hydraulic system for mobile radar

Crayler forklift for military applications

Loader crane Recovery vehicle with two winches and semi-trailer

12

C-Astral is an aerospace enterprise and solution pro-vider based in Ajdovscina, Slovenia, the “hub” of ad-vanced aerospace development and integration in this part of the world. The company is one of the mar-ket leaders in the small unmanned systems (UAS/UAV) and services field and has a global presence, a robust research and development program and advanced in-tegration/customization capacities.

The company is built around the fields of expertise and practical experience in aerospace, unmanned systems, electronics and sensor development, aerial based surveying and processing, remote sensing, tel-ecommunications, renewable energy systems and extreme environment autonomous habitats and com-munications.

C-ASTRAL D.O.O

.C-ASTRAL d.o.o.Gregorčičeva 20SI-5270 Ajdovščina

E: info@c-astral.comW: www.c-astral.com

C-Astral operates a software and hardware laboratory for aerodynamics and systems integration work and a prototyping CAD/CAM workshop facility for composite and metal materials work, modeling and systems in-tegration. The founders of C-ASTRAL have been active in renewable energy systems integration and habitats work since 1994 and in aerospace since 1999 and are responsible for the first Slovenian Unmanned Aircraft System test flight in 2005 with the Spectral System platform.

C-Astral is your dynamic aerospace and unmanned systems partner with systems operational, generating revenue and flying on all continents, including Antarc-tica and over the Arctic.

13

C-AS

TRAL

D.O

.O.

14

With its specialized military and police equipment, the company Dat-Con has successfully established itself in the European market. Specialized knowhow and experience enable the company to adapt to the customers’ requirements and demands quickly and efficiently.

DAT-CON

D.O.O

. Dat-Con d.o.o. Cvetlična ulica 52SI-3313 Polzela

T: +386 3 7033 300F: +386 3 5720 408 E: info@dat-con.siW: www.dat-con.si

With its outstanding and efficient state border moni-toring system, the company has successfully complet-ed a series of different projects in the international market.

Mobile surveillance systems

We have more than 20 years of experience with the integration of different mobile observation systems in line with end-user demands. Because of their normal appearance do not stand out from other vehicles. This can provide very significant advantages in special un-dercover operations. Observation systems allow po-lice, security or coast guards to control and observe different areas like borders, ports or certain events and help to prevent different crime, increase safety and enable easier observation… The systems are flex-ible and allow a great variety of activities.

BOPAS Portable Border Patrol System

The remote operating system consists of various items of equipment that enable the manual or automatic monitoring of an observed sector, the localisation of objectives and recording of video sequences from ob-servations made with infrared binoculars. BOPAS sup-ports multisensory camera systems (Thermal, Day, Laser Range Finder, GPS and Compass). All telemetric data from the camera can (optionally) be observed and transferred from BOPAS to other systems.

15

DAT-

CON

D.O

.O.

DC PT Systems

The company DAT CON has developed different pan tilts – DC PT systems that are suitable for a variety of uses and integrations adapted to customer needs.

DC PT systems deliver high performance and gyro sta-bilisation for loads up to 100 kg. Their light weight and compact size makes them ideal for mobile solutions. Their high power to weight ratio distinguishes them from the competition. The positioning accuracy of high precision models is better than 0,2 mrad with moving speed up too 200˚/s. All systems are IP67 approved to make them suitable for all weather conditions. The mechanical assembly kit and software package can be fully customized to meet customer specifications. A special version has 3 platforms suitable for a combi-nation of cameras and radar all integrated into a sin-gle telescopic mast to avoid having any dead zone in the observation area. Different versions have been in daily use at Schengen border – 24/7 for over 10 years.

16

Laboratory Equipment for Field Hospitals and Analytical Laboratories

Domel, Business Unit Laboratory Systems has been producing laboratory equipment for more than 60 years. We are a well known producer of centrifuges, cooling centrifuges, cyto-centriufges, orbital shakers, reciprocal shakers, shaking incubators, mini heating incubators, mini cooling incubators, heating stirrers, water bath and bead beater - homogenizers.

Domel has supplied laboratory equipment to partners of United Nations.

High quality equipment meets international quality standards ISO 9001, ISO 13 485 and ISO 14001.

Universal Centrifuges are designed to be used in medical, industrial and scientific laboratories to sep-arate substances with different relative densities by centrifugal force. The maximum rotational speed of 18.000 RPM gives the centrifugal force of 30.000 x g.

A wide range of programming options and an elec-tronic operation control allow a trouble-free usage of the centrifuge. With a special drive, quiet mainte-nance-free operation without any carbon dust pollu-tion is guaranteed.

Homogenizer - Bone & Teeth Grinder – Ball Mill Bead Beater Mill Mix 20 is a useful tool for disinte-gration of many materials and can be used in differ-ent fields of science: microbiology, biotechnology, medicine, veterinary, analytical chemistry, geology, metallurgy. During the last period we have developed methods and applications used in forensic science. Methods can be applied in the following cases: iden-tifications of persons in mass graves, in natural dis-asters, identifications of persons in such accidents where there is no tissue remaining.

DOM

EL, D.O.O

. Domel, d.o.o.Business Unit Laboratory SystemsOtoki 21SI-4228 Železniki

T: +386 4 5117 500F: +386 4 5117 501E: info@domel.comW: www.domel.com/products/ laboratory-equipment

17

CBRN RECONNAISSANCE VEHICLEfor Nuclear, Biological and Chemical detection NSN 6640-420000945

CBRN reconnaissance vehicle system has been de-signed for Chemical, Biological, Radiological and Nuclear reconnaissance. The system offers a fully in-tegrated and automated CBRN reconnaissance suit, controlled by central computer/s and operated by the vehicle crew.

It provides automated crew protection capability and measuring instruments for CBRN detection and iden-tification, systems for visual reconnaissance, and re-mote (stand-off) chemical detection. The system ena-bles integration onto a suitable vehicle platform.

This configuration enables detection and identifica-tion of Chemical Warfare Agents (CWA), Biological Warfare Agents (BWA), Toxic Industrial Chemicals (TIC), and complete spectrum of other toxic releases (ROTA). All data acquisition and processing is auto-mated. Reports are sent in NATO standardized mode.

AUTOMATED CREW PROTECTION CAPABILITY:

• Air monitoring inside the vehicle (CO2 and O2 level monitoring);

• Chemical detection and air monitoring inside the vehicle (including the NBC filter break-through sur-veillance). Detection of CWAs and TICs;

• Real-time nuclear radiation monitoring in the vehi-cle for crew protection.

CBRN RECONNAISSANCE SYSTEM CAPABILITIES:

• Nuclear detection - area and ground contamination monitoring from the vehicle;

• Chemical detection and outside air monitoring (CWA and TIC detection);

• Biological detector - provides continuous and real time BWA detection capability (biological or aero-sol type changes in the atmospheric background);

• Remote (stand-off) infrared chemical detection. Automatic, real-time monitoring of all known CWAs and important TICs - up to a distance of 5km - sta-tionary or on the move. Complete 360° coverage, elevation angle from -10° to 50°;

• Sampling System - fully automated and remote controlled sampling system for collection of sam-ples from within the protected environment of the vehicle. Collected samples are sealed in containers and stored outside the vehicle for further analysis;

EM.T

RON

IC D

.O.O

. em.tronic projektiranje, razvoj, proizvodnja in trgovina elektromehanskih sistemov d.o.o.Počehova 12 SI-2000 Maribor

T: +386 2 4502028 F: +386 2 4502020 E: em.tronic@em-tronic.si W: www.em-tronic.si

18

• Marking System – automated, operator controlled marking system for contaminated areas;

• Meteorological station - providing all required me-teorological data to the system;

• Central computer system and MFD Displays for the operation and control of all data collected from sensors inside and outside the vehicle;

• CBRN Software – fully integrated CBRN software system for the operation and control of sensor sys-tems, data acquisition, alarm monitoring and re-porting;

• GPS receiver – integrated GPS receiver ensures con-stant position information and precision guidance capabilities;

• Laser threat detection and warning system - pro-tecting against laser associated weapon threats;

CBRN integration can be performed on any armored vehicle platform.

The system has been extensively tested and approved by relevant (NATO) authorized test facilities.

ADVANCED CAPABILITIES:

• Chemical identification - Mobile Mass Spectrome-ter with air-surface probe, gas chromatograph and surface sampler providing identification capability from any medium (soil, water, air);

• Sampling wheels for ground surface sampling and detection/identification capability on the move;

• Visual reconnaissance systems (day and night ob-servation capabilities) and weapon systems;

• Portable detection instruments;• Communication systems with required comm. soft-

ware.

EM.TRO

NIC D.O

.O.

Entire integrated CBRN detection system with instru-ments, equipment, hardware and software support can be further customized to fit specific needs and de-mands of the customer.

19

Instruments for Chemical Warfare Agents (CWA’s) de-tection, Biological Agents detection and Radiological detection are integrated in the measuring equipment case.

A meteorological station is used for measurement of wind speed, wind direction, humidity, air temperature and atmospheric pressure. Compass is integrated in meteorological station and is used for measuring wind direction according to North. GPS determines Latitude and Longitude of placed system in the field.

Rugged computer with software interface enables in-strument control and data transmission over radio to the Control Station.

Control Station enables on-line monitoring and visual-ization of Stand Alone Units, visual and audio alarms, saving alarm events into database and sending NATO standardized ATP-45 messages.

STAND ALONE – N.B.C. DEFENCE DETECTION SYSTEM NSN 6665-420000599

Stand Alone is a detection system for N.B.C. defense, for observing and protecting important buildings, for protecting people against possible N.B.C. attack with weapons for mass destruction.

Independent Stand Alone Units are placed on the field and automatically send data to the Control Station for N.B.C. monitoring.

Stand Alone Unit consists of two cases. A battery is in-tegrated in the power supply case and takes care for autonomous operation of the unit.

EM.T

RON

IC D

.O.O

.

20

Crew consists of CBRN detection operator, chemical and biological analyst. System enables detection and identification of Chemical Warfare Agents, Biological Warfare Agents and radiation monitoring inside and outside the vehicle.

Chemical analysis with Mobile Mass Spectrometer, air-surface probe and gas chromatograph provide identification capability from any medium (soil, water, air). Biological detection enables automatic start of air sampling for further PCR analysis inside glove box.

EM.TRO

NIC D.O

.O.

DEPLOYABLE CHEM / BIO LABORATORYCHEMICAL LABORATORY NSN 6640-420000945BIOLOGICAL LABORATORY NSN 6640-420000948

Deployable CHEM / BIO Laboratory is designed for de-tection and identification of Chemical Warfare Agents (CWA), Toxic Industrial Chemicals (TIC) and Biological Warfare Agents (BWA). Laboratory combines function-ality, efficient use of space, flexibility with BSL-3 con-tainment and capability for fast on-site diagnostics. In the case of at tack with weapons for mass destruction a rapid and effective response with correct identifica-tion is extremely important.

MOBILE CBRN LABORATORY

Mobile Laboratory is an integration of a MAN truck and container, which is fixed to the vehicle. Contain-er is made of insulating material and divided in three compartments: engine room, entrance and laborato-ry. The laboratory is air-conditioned and pressurized.

Filtration and overpressure sys tem protects against CBRN agents. Positive pressure assures clean air in the laboratory as well as the negative pressure in glove box assures clean and safe working environment.

The CBRN mobile laboratory can be further custom-ized to fit specific needs and demands of the customer.

21

FAKU

LTET

A ZA

STR

OJN

IŠTV

O Univerza v Ljubljani, Fakulteta za strojništvo, Katedra za modeliranje v tehniki in mediciniAškerčeva cesta 6SI-1000 Ljubljana

T: +386 1 4771 200F: +386 1 2518 567W: www.fs.uni-lj.siW: kmtm.fs.uni-lj.siE: kmtm@fs.uni-lj.si

The members of the Chair of Modeling in Engineering Sciences and Medicine (CmESM) have contributed to a number of R&D projects and tasks together with other chairs and laboratories from the Faculty of Me-chanical Engineering at the University of Ljubljana, and with partners from Slovenian and foreign compa-nies and institutional partners. Members of the chair specialize and are competent in different fields of mechanical design: geometrical modelling (3D CAD), technical documentation, GDT, tolerance stack anal-ysis, sensitivity analysis, finite element model (FEM) analysis and simulation, material models, multibody systems analysis, mechanisms, mechanical elements design and analysis (rolling bearings, gears, bolt con-nections, etc.), vehicle theory and dynamics, several areas of computer simulation, and mechanical exper-imental techniques.

FEM response analyses of light armored vehicle (LAV) Valuk 6x6 under 6 kg TNT blast

Blast loading experiments are among the most ex-pensive because of their harsh environment and a large number of experts involved in the tests. In some cases, very strict safety requirements and additional governmental permissions are needed, making the numerical approach the only reasonable and valuable tool for examination.

Blast response of structures is of great importance in military applications. However, civil and governmen-tal structures are becoming more exposed to blast loads as a result of increased possibility of terrorist at-tacks, especially in the last two decades. Whatever the structure under investigation, a blast loading model should be verified first in order to be successfully used for examination. For that purpose, we have developed very powerful and sophisticated numerical models for advanced analyses, which can be used for examina-tion of mechanical as well as civil structures.

Finite element analyses of bullet plate perforation

We also have experience in modeling advanced higly nonlinear processes involving fracture initiation, its development and final size.

Precise and accurate finite element (FE) analyses re-quire precise material models as well as parameters of the materials involved in the process. Therefore, we also specialize in static, dynamic as well as fatigue ma-terial characterization for which advanced techniques such as acoustic emission as well as image analyses are used.

22

Material characterization using image analyses technique

With the use of high-speed video cameras (FASTCAM Ultima 512), recording and comparison of many high-speed processes is possible.

Instrumented Charpy test vs. numerical result comparison

FASTCAM ultima 512 – Instrumented Charpy test

Commercial as well as our own software tools enable formulation and application of mechanical and math-ematical models of vehicles and assemblies thereof. Such models are applicable for simulations at differ-ent levels of complexity and speed of computation.

We have developed a software tool i3Drive, which en-ables simulation of a wheeled vehicle ride on an ar-bitrary terrain. The i3Drive software tool is connecta-ble to a haptic interface (active seat, active steering wheel) which provides the user with the feedback through the displacement of the seat or the force/mo-ment applied on the steering wheel.

Geometrical and simulation model of a 6-wheel military vehicle (Valuk 6x6)

We also specialize in building and implementing de-tailed geometric, mechanical (MBS) and mathemati-cal models of wheeled vehicles. Additionally, we carry out experimental validation of these simulation re-sults.

FAKULTETA ZA STROJN

IŠTVO

23

We have also developed a module for the simulation of system dynamics based on the multi-rigid-body system approach which shall be widely applicable for the simulation of all elements of the human-vehi-cle-roadway system.

Geometrical models of the Slovene Military vehicles

Geometrical models of various vehicle types have been produced for the purpose of display in a virtu-al 3D environment. They are applicable for display in various software tools (commercial and our own de-veloped ones).

Numerical simulations based on the multi-body sys-tem (MBS) and the finite element method (FEM) are two types of computational methods used for sim-ulating the human body response during traffic ac-cidents or other mechanics loadings. Using these techniques, our research group has developed a MBS model of a human body that consists of interconnect-ed body segments the relative movements of which are limited by resistive joint properties. Geometrical and mass properties of individual segments are deter-mined through a CT scan with CAD reconstruction.

FEM of Human Neck and Torso with cervical vertebrae and interver-tebral disc

Analysis of the cervical spine dynamics at rear-end impact on a sled test device

Model verification and optimization were performed based on impact tests on a purpose-built sled test device. The model is robust and computationally ef-ficient and hence appropriate for parametric analyses of critical traffic situations. Based on the determined load flow and injury criteria, the model can predict injuries to vehicle occupants and other road users for different traffic accident scenarios.

The staff at the Chair of Modeling in Engineering Sciences and Medicine are interested in joint cooper-ation on various R&D projects in the aforementioned and related fields as part of bilateral cooperation with companies and institutions of interest as well as inter-national project consortiums.

FAKU

LTET

A ZA

STR

OJN

IŠTV

O

24

FerroČrtalič

Know-how which was gained through 50 years of family tradition, innovation, and excellence result-ed in the world renowned reputation of our brand FerroECOBlast, under which we offer a diverse pro-duction programme, ranging from basic sand blasting to advanced automated and robotic systems.

We are one of the leading companies worldwide in developing complex custom-made solutions, produc-tion machinery, and services in the most demanding sector of the surface finishing industry

Our solutions consist of:• Automated, robotised, and manual blasting (Sand/

Shot blasting)• Hardening the surface (shot peening)• Cleaning with dry ice & CO₂ snow blasting• Decontamination – UHP water cleaning and dry

cleaning

Defence solutions

With satisfying high level requirements alongside our dedication to constant research and development (in-house laboratory and probably the largest shot peen-ing cell in Europe) FerroČrtalič plays an active and indispensable role in the defence industry, where no mistakes are tolerated.

Our highly skilled and certified engineers were able to overcome some of the most demanding challeng-es in the industry. Successfully providing complete solutions – from idea, testing, design, research, devel-opment, production, installation, training, and after sales activities.

The most common solutions and services provided and specially designed for the defence industry: • Sand/Shot blasting of tubular forms like gun and

cannon barrels, gun components, chassis – combat armoured vehicles, large calibre artillery shells…

• Shot peening of landing gear, turbine blades and components, springs, chassis components, struc-tural components, gear, shafts…

FERROČRTALIČ D.O

.O.

FerroČrtalič d.o.o.Sela pri Dolenjskih Toplicah 47SI-8350 Dolenjske Toplice

T: +386 (0)7 38 45 100F: +386 (0)7 38 45 115E: info@ferrocrtalic.comW: www.ferroECOblast.com

• Reliable & Endurable• Heavy Duty• Easy to Operate & Maintain• Fully Controlled Processing• Automated & Robotised

Applications

IDEA & TESTING

RESEARCH & DEVELOPMENT

PRODUCTION & ASSEMBLY

INSTALLATION & TRAINING

AFTERSALES ACTIVITIES

Shot peening

25

FER

ROČR

TALI

Č D.

O.O

.

Sand/Shot blasting of tubular forms

Modern day gun barrels are sophisticated in their con-struction and makeup. Specials materials and struc-tures are needed for withstanding high pressures and stresses. For this kind of product to have a long life cy-cle and in order to withstand severe conditions of use, special outer coatings and surface preparation must be applied.

External Sandblasting of gun components

As we see in other segments of defence equipment, the same growing trend of high demands can be no-ticed with modern guns and similar types of equip-ment and components. Meaning that alongside qual-ity prepared surface and achieved required standards of roughness for better adhesion of coating, it is also of great importance to achieve the appropriate final visual effect of parts in order to satisfy more and more demanding needs of the end-user, who is putting a lot of pressure on the industry so as to constantly achieve a better aesthetic look.

Shot peening is a well-known technology with which the surface of a part is bombarded with small spheri-cal media called shot. Each piece of shot striking the metal acts as a tiny peening hammer imparting a small indentation or dimple on the surface, thus hardening the surface. This technology offers significant increas-es in part life, while protecting it against fatigue and stress corrosion. It is the most economical and practi-cal method of ensuring surface residual compressive stresses. Our company employs four certified shot peening specialists, ensuring our esteemed business partners that we are always one step ahead.

• External Sand/Shot blasting of tubular forms• Closed cabinet or trough-feed design• Workpiece rotation• Automatic nozzle manipulation• Parametric blast programming

Manual surface blasting in order to achieve cor-rect roughness of the particular gun component

• Simple design closed cabinet• Manual or Semi-automatic blasting• Ergonomic design for everyday

26

Iskra PIO is a progressive European company active in the clean and cleaning technology.

We have 25 years experience in project development, engineering, production, validation and servicing of equipment.

We are specialized in the producing and integration of laboratory equipment in to the mobile container lab-oratories, including glove boxes and microbiological safety cabinets.

CBRN mobile laboratory container

The CBRN mobile laboratory container, from Iskra PIO is a fully equipped mobile laboratory used for the de-tection, analysing and identification of chemical war-fare agents, toxic industrial chemicals, radiological and nuclear materials. Mobile laboratory will provide a workspace in which operators can work safety, re-gardless of the environment.

It can be deployed/pre-positioned where there is a risk of radiological, biological or chemical terrorism or to support public health missions such us influen-za outbreak or natural disaster response. It will pro-vide military units and first responders with a facility for emergency response, where they have the use of laboratory equipment, including Class II and Class III Biological safety cabinets, pass-through containment boxes and analytical equipment essential for working

safely and effectively with chemical, biological or radi-ological hazardous materials.

Features

• Laboratory is built into speciality 20 ft ISO shipping containers for easy global deployment , also it is self contained

• HVAC systems and controls, including HEPA and NBC filtration

• Glove box, from Iskra PIO, with under pleasure HEPA and carbon filtration, could be used for low level al-pha an/or low level beta particle containment

• Autonomous system for lift and lower on truck plat-form, with hydraulic legs

• Electrical generator supplied approximately 96 hours on one tank of fuel

• Thousand litres of onboard water• Sinks drain into holding tank for lateral disposal• Inner walls, floors and ceiling made from stainless

steel sheets• Outer chassis is air tight, coated with pigmented

polyurethane (CARC) coat• Eye wash station• Laboratory furniture• Laboratory material• Weather monitoring station• GPS tracking location system

Basic instruments for radiological laboratory

• α, β aerosol, liquid and soil monitoring• high sensitivity Gamma Area monitoring• Gamma spectroscopy facility • Personal dose rate meters ...

Ultrasonic cleaning equipment

Ultrasonic cleaning technique is an efficient one be-cause of the fact that it sends sound waves through the water in an ultrasonic bath that ignites the clean-ing process. A huge amount of minute bubbles, or often known as cavitations at times, are formed and then collapsed because of those sound waves. This creates many small jets moving through the cleaning liquid. These jets are used as a brush to wipe off the dirt from the object you are looking to clean. This re-sults in ultrasonic cleaning of various objects within the cleaner. Ultrasonic is very helpful when it comes to cleaning objects that cannot be cleaned otherwise and you do not need to rub or polish these objects.

ISKRA PIO D.O

.O.

Iskra pio d.o.o.Trubarjeva cesta 5SI-8310 Šentjernej

T: +386 7 39 31 400F: +386 7 39 31 440E: info@iskra-pio.siW: www.iskra-pio.si

27

There are many considerations important to ultrason-ic cleaning. Optimizing these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner.

Iskra PIO have good technical and technological solu-tions with a background in maintenance and cleaning of military component parts.

We are leaders in the field of ultrasonic cleaning and disinfection of respiratory equipment (breathing masks,....).That method removes body fluids , soot, toxic substances and debris from hard to reach areas, restoring parts to factory new cleanliness.

Another field of application is ultrasonic gun and rifle cleaning. Quickly and effortlessly removes dirt, carbon and grease even the most soiled guns. Ultra-sonic waves penetrate deep into those hard to reach places for thorough and effortless cleaning.

Microbiological safety cabinets

The microbiological safety cabinets assure a high safety level for operators, surrounding the product. The cabinets are manufactured according to require-ments of SIST EN 12469:2000 standard. Iskra PIO has more than 20 years of experience in safety cabinets design and manufacturing. We have the ability to of-fer reliable and user friendly cabinets adapted to the requirements of the user.

ISKR

A PI

O D

.O.O

.

28

Microbiological safety cabinet executed in protec-tive class II according to EN 12469:2000 and DIN 12980:2005 assure ISO 5 (ISO 14644-1:1999), class A (GMP) clean conditions inside working area. Clean conditions are assured by H14 (EN 1822) HEPA filtra-tion of recirculating and exhaust air. Laminar vertical air flow in working area and air curtain on the front ap-erture assure controlled clean conditions in the cham-ber and prevents material leakage from the chamber.

Microbiological safety cabinet executed in protective class III according to EN 12469:2000 assure safe con-ditions to operator, environment and product during handling hazardous materials. Safety is assured by • Hermetically sealed construction• physical barrier between operator and process –

work is executed through gloves attached to cham-bers wall

• Controlled negative pressure inside working cham-ber

• H14 (EN 1822) HEPA filtration of inlet and double H14 HEPA filtration of exhaust air

• Air flow according to standard EN 12469:2000

Additional safety is enabled by an automatic disin-fection system integrated in cabinet’s construction and software.

Design and construction of safety cabinets for military use is adjusted to assure maximal reliability in most demanding environments.

Validation

We perform validations to confirm clean and safe working conditions. We have a qualified team and an-nually calibrated measuring devices for validations.

After the process we prepare validation report, which is acceptable for inspection services.

Following tests can be included in the validation tests:• Airborne Particle Counts• Filter in Place Leak Test• Air Flow Volumes/Air Change Rates• Temperature/Humidity Test• Room Pressurisation Test• Smoke Patterns• Light Levels and Noise Levels• Leak test• Recovering time• KI-DISCUS test• OEL test• Sensors calibration• …

ISKRA PIO D.O

.O.

29

ISKR

A ZA

ŠČIT

E D.

O.O

. ISKRA ZAŠČITE d.o.o.Stegne 23 ASI-1000 Ljubljana

T: +386 (0)1 5003 100F: +386 (0)1 5003 236info@iskrazascite.siwww.iskrazascite.si

National Defence

The importance of maintaining our National Defence and its personnel and equipment in a state of military readiness cannot be over-stated. To this end, the Slo-venian Department of Defence spends millions of Eu-ros each year on acquiring the latest in defence mate-riel and ensuring it is well maintained and operational.

Iskra Zascite Ltd specialises in providing lightning, surge and grounding solutions to critical installations and systems. It manufacturers an extensive range of surge protection products for both power and data/signal line protection at its 2000 m2 manufacturing fa-cility located in the Stegne Industrial park. The facility is ISO 9001 certified and many of its employees are con-sidered international experts in their field. It currently employs approximately 25 engineers on staff holding degrees at bachelor, masters or doctorate level.

Military Systems - Environmental threats

Modern military facilities comprise an array of sophisti-cated electronic systems which are vital to the nation’s security and the safety of its forces and operating per-sonnel. Such systems, by their very nature, are also be-coming increasingly susceptible to damage from tran-sient over-voltages. These transients may eventuate from airborne events such as lightning, EMI or NEMP radiation, or from system level transients induced on the supply and data communications networks.

The effects of the natural lightning event are de-scribed in the International Electrotechnical series of Lightning Protection Standards, IEC 62305. This four part series provides general information on the nat-ural lightning phenomenon as well as guidance as to

how to conduct a complete risk assessment of the fa-cility and the measures which need be taken to ensure this calculated risk falls below the tolerable risk. Part 4 of this standard explains how to mitigate the effects of lighting by creating safe “protection zones” within the structure and by applying specific measures such as: screening, structural lightning protection, ground-ing, equipotential bonding and surge protection. The companion IEC 61643 series of standards, provides information on the testing and selection of Surge Pro-tective Devices (SPDs) used for the protection of sen-sitive electronic systems.

Iskra Zascite has technical experts on both these com-mittees, as well as other international bodies such as Cenelec in the EU, and IEEE and UL in the USA. Such active participation by our key technical personnel ensures they remain abreast of the latest know-how and that our products are able to comply with all rele-vant mandates and norms on safety and performance.

Military Systems – A coordinated approach to protection

Over the last 15 years the company has become recog-nised as a world leader in its field and a leading man-ufacturer of SPDs for the protection of electrical and electronic systems. The company is often contracted as a sub-consultant to large industrial projects where a coordinated approach to facility protection is required.

The company is capable of providing comprehensive solutions to lightning and surge protection as well as grounding and bonding. These include carrying out risk management assessments, feasibility studies, technical consulting, engineering, commissioning, training and remote monitoring as required.

To provide external structural lightning protection to facilities such as: command and control centres, muni-tions bunkers, radar, navaids and fuel storage depots, it

30

ISKRA ZAŠČITE D.O.O

.

is licensed to market both conventional and early stream emission lightning terminals, insulated down-conduc-tor systems and grounding solutions. It also produces a line of lightning event and surge event counters.

A number of its products are designed for hazardous and explosive environments and are IECEx and ATEX certified for use in such environments.

The company adopts a strategic approach to its man-ufacturing by ensuring the supply of critical compo-nents used in the manufacture of SPDs, remains with-in its control. For example, the company is physically located some few hundred meters from the fabrica-tion of metal oxide varistors (MOV) and has recently commissioned its own state-of-the-art gas discharge tube (GDT) fabrication facility. Both MOVs and GDTs are key components to SPDs. This high degree of ver-tical integration has allowed our manufacturing to remain world competitive despite the pressures from Asian competitors. To our important customers, this translates to meaning supply security, knowing that the designs and solutions we engineer today, will re-main available and supported in the years ahead.

The company also prides itself in design excellence and in solving practical challenges. An example of this is our SAFETEC series of SPDs, which employs patented technology to allow the SPD to handle tem-porary over-voltages of the power network without burning or permanent disconnection. To the custom-er this means added safety and reliability as well as increased operating service life.

Military Systems – Remote monitoring

As with many electronics devices connected to the power grid, there is a growing need to provide capa-bilities for remote monitoring. The utility industry is beginning to talk of a “smart grid” of tomorrow. While this term may means different things to different peo-ple, it clearly does imply that equipment connected to the power network will require to be remotely moni-tored and/or controlled.

Iskra Zascite are already working on the new gener-ation of “intelligent SPDs” - SDPs which can be re-motely monitored and signal their life-status to a cen-tralized facility management system - for example by flagging that maintenance is required, or that a surge has been diverted to protect the equipment. The new ProGrid series of surge and lightning counters is one such example where a remote communication link via Ethernet or GSM is provided.

To better accommodate our future plans to provide a comprehensive and coordinated approach to remote data monitoring, the Iskra Zaščite Group acquired the Slovenian company Solvera Lynx. This addition brings to our business the capability to integrate many as-pects of a strategic facility including its: surge and lighting protection systems, tactical communications, air space control, artillery command and its control and communications systems.

Military Systems – A strategic partner

Iskra Zascite is proud to be of service to the Slovene Ministry of Defense and Slovene Armed Forces. A num-ber of our engineers have experience working on high level defence projects both nationally and internation-ally. As a company we are committed to excellence in design, manufacture and partnering with our clients through best practice. We pride ourselves in technical excellence, a skilled work force, internationally respect experts and a progressive management style.

31

ISKR

ATEL

D.O

.O. Iskratel d.o.o.

Ljubljanska c. 24aSI-4000 Kranj

T: +386 4 20 7000info@iskratel.si www.iskratel.si

Iskratel is leading European InfoCommunications vendor and solution provider with 65 years of experience, own R&D and manufacturing, more than 800 employees and local presence in over 30 countries. Highly integrated end-to-end solutions are based on our extensive experience in fixed and mobile telecommunications, and are designed to be future proof, which is guaranteed by Iskratel’s active involvement in various technology standardization and regulation bodies.

Iskratel InfoCommunication solutions blend into any environment and are tailor made for various segments and industries including military, public safety, railways, energy sector and large corporations.

Modular Multiservice Architecture for Real-time Services

Iskratel SI3000 MMARS is designed for various military deployments, public safety, humanitarian aid relief and first responders. It is a next-generation, packet-based, tactical network component that can be used as the basis for many new solutions, implementing the TACOMS STANAG, which is defined for NATO countries to enable interconnectivity. It is a perfect solution that enables rapid response in case of crisis or natural disasters, while maintaining connectivity and services. It supports legacy equipment and interconnections with the public telephone network. Its compact design, which is instantly deployable, provides a rich set of services, including voice, video data and user mobility.

The MMARS node is developed according to the latest ETSI (IMS, MLPP, H.323), IETF (SIP, SIP-T) and NATO (TACOMS and NNEC) standards, thus providing a rich set of quad-play services with superior service quality and standardized external interfaces, with backward compatibility to legacy (tactical, PSTN) systems. The services, like priority services, announcements, message play and record, advanced multimedia conferences, security features, are provided as an integral part of the MMARS node. Nevertheless, the MMARS node provides, together with Battlefield Directory or Home Subscriber Server, user/terminal and service mobility that allows users to access services, not only on one node, but they are able to “roam” seamlessly between nodes.

Mission-critical Voice Over LTE

Iskratel SI3000 IMS VoLTE solution provides reliable and secure voice communication. Typically dedicated networks provide only voice services. Next generation mission critical solution leverage standard IP technologies and provide a broadband platform for multimedia services including data, voice and video communication. These services bring many new possibilities for usage in various military deployments and public safety networks.

IMS (IP Multimedia Subsystem) presents the core of next generation’s mission critical networks, by providing globally standardized 3GPP architecture which ensures seamless integration with LTE radio network.

Iskratel’s VoLTE solution is based on the SI3000 IMS, which brings IMS functionality and interfaces in a compact package for fast integration and deployment. It can scale from few hundreds up to a few hundred thousand users for tactical level military applications or nation-wide public safety networks, where integration with existing networks is essential.

Iskratel’s solution provides a rich set of interfaces for interconnectivity with NGN and with legacy networks using TDM, analogue or IP interfaces. Iskratel’s MMARS solution is configurable to IMS to ensure VoLTE services for mobile users.

32

ISKRATEL D.O.O

.

Our goal was to simplify complex network architecture with “all in one” compact concept: • End-to-End (E2E) pre-integrated open IMS solution

with open APIs • centralized management of complete E2E solution • proven and certified E2E solution, verified by

institutes, certification bodies and technology partners

• integrated Telephony Application Service (iTAS) • VoLTE with enhanced Single Radio Voice Call

Continuity (eSR-VCC) • Rich Communication Suite.

Public Address & General Alarm System

Public alerting and warning systems are needed to protect the lives of people in case of major emergency by warning the public of impending natural disasters, war situations and other dangers. There is no single way to reach all citizens in the cases of danger. Besides traditional technologies like sirens, fixed phones, TV and radio broadcast today we also consider mobile phones and internet.

Iskratel’s comprehensive Public Information and Notification System (PINS) assures timely and reliable information to everyone involved in emergency situations. It integrates new and legacy public warning systems, providing a broad range of message options and communications pathways for the delivery of alert and warning information to citizens before, during, and after a disaster.

The heart of the system is Iskratel’s PINS server, which controls a variety of public alerting and warning systems like sirens, TV and video broadcasting, audio and video equipment and others. Any type of system that can be used for alerting and warning purpose can be integrated and controlled by PINS server.

Many advanced features and applications like situation awareness provided with visualisation on integrated geographic information system (GIS), work-flow application for emergency events handling and maintaining records of all operations, statistics and analytic tools, pre-planned mitigation and response scenario management significantly enhance operators’ efficiency.

Over the years company gained a leading technological position while so-crafting telecommunication trends and protocols. Iskratel’s call servers that include IMS/AGCF have over 500 deployments worldwide, in various industries, military and other governmental facilities.

Iskratel delivers mission critical communication networks for governmental and public safety organizations with its own 112 emergency solution for receiving and processing emergency calls and inter-agency coordination.

Also Iskratel LI/SORM solution perfectly fits into regulatory requirements for voice and data interception for security and public safety importance.

The Iskratel SI3000 product family is a unified platform that combines all the IP-technology-based products and solutions, but concurrently supports smooth transition from legacy technologies. Key advantages are robustness and reliability, modular design and scalable architecture that facilitate solutions of all sizes. The SI3000 stands for wide interoperability and readiness for the delivery of any type of mission critical service.

33

IZO

P-K

D.O

.O. IZOP-K D.O.O.

Hrašče 23SI-5272 Podnanos

T: +386 31 278 300M: +386 41 794 895E: izop-k@izop.si W: www.izop-k.com

The company is known over the world as a byword for responsibility, performance and commitment.

The distinctive feature of IZOP-K is inside its own facil-ities which constitutes services of:• storage and manipulation explosives, ammunition,

arms.• special production of military components and de-

fence industry• demilitarisation and recycling of conventional mu-

nitions

Our experience covers everything from small arms ammunition up to large and more complex items such as those containing White Phosphorous, CBU’s, Sea Mines, Anti Personnel Mines, Anti Tank Mines and rock-ets.

The IZOP-K team consists of engineers and laboratory technicians from the following fields:• arms production/destruction engineering• hazardous materials’s processing engineering • logistics engineering

Issuing land and overseas logistic services, support-ed with facilities in option to store 750T NEM of goods (ADR 1.1 - 1.6) both palletized and containerized.

Trading with explosives, ammunition, vehicles, arms.

Helmets for military purpose are designed, produced and tested in accordance with the standards. Severe inspections concerning both raw materials as well as production process guarantee, for each helmet, the fulfillment of the technical specification of quality, re-liability and safety.

Production unit conforming to GMP and ISO stand-ards, safe rooms, a well-equipped laboratory, remote controlled detectors, test facility with a high safety lev-el and storage facilities secured according to military standards.

IZOP-K is representing partners for lightweight armor soldier architecture, EOD suits, explosives, tanks, aero-space, vehicles, ammunition and pyrotechnics.

34

Cryogenics is one of Le-tehnika’s programs of high technology equipment

With almost 30 years of experience we have become experts in cryocoolers and have specialized in the development for technology of miniature cryogenic coolers, their production, assembly of components and their integration into the higher level systems. Ac-cording to the business strategy of the company, we are operating with more than 15 countries worldwide.

The main products of our program include specialized miniature coolers based on the Joule -Thomson effect (self-controlled, fixed orifice, actively controlled, fast cool down, nonstandard) and coolers based on Stir-ling effect (linear and rotary drive).

Products are designed for cooling infrared detectors used in various fields of industry and other purposes, like surveillance, reconnaissance and in missiles.

Products are made by request of specific needs of the client. We present our cooling system at conferences or at trade fairs such as SPIE, EUROSATORY, DSEI and others.

Le-tehnika has received prestigious national and in-ternational enterprise awards earned for specific achievements and have international certification marks such as ISO 9001 and ISO 14001 standards, which provide high quality management.

LE-TEHN

IKA D.O.O

., KRANJ

Le-tehnika d.o.o., KranjŠuceva ulica 27SI-4000 Kranj

T.: +386 (0) 420 20 280F.: +386 (0) 4 204 21 22E: info@le-tehnika.siW: www.cryocoolers.eu

35

MIL

SIS

TEM

IKA

D.O

.O. MIL SISTEMIKA d.o.o.

Zemljemerska ulica 10SI-1000 Ljubljana

E: info@milsistemika.com

About MIL Sistemika

MIL Sistemika is a software development and consult-ing company, with a mission to sell commercial off the shelf products in the area of military command & control, communications and training & simulation products.

MIL Sistemika focus on Command & Control software, covering all levels from the individual soldier to the top (planning) levels of military command structure. It covers Sensor & Weapons integration, GIS naviga-tion and mapping system, Communications suits, and integrated training tools. MIL software is designed on true mission requirements, and feedback from the soldiers. MIL software can act as a true force multiplier when used in correct manner. Command and control refers to the ability of military commanders to direct forces. The addition of communications to the group-ing reflects the fact that communications is required to enable this coordination. In modern warfare, com-puters are also a key component.

Dismounted soldier (future soldier)

Personal Eye System is a person-al tracking, navigation and data sharing application aimed at soldiers, police, security forces, emergency services and others that need topographic naviga-tion, tracking, blue force track-ing, and common operational picture sharing. Designed to run on a popular Android platform, can be used as a PDA (Personal Data Assistant) or fully integrat-ed in a future soldier’s kit.

SISTEMIKA d.o.o.

36

MIL SISTEM

IKA D.O.O

.

Battlefield Management System (BMS)

With its robust and modular architecture built around a high performance GIS Engine, the “Battle Eye Sys-tem” delivers all tactical data to the screen of the sol-dier. It offers a wide range of connectivity to various data networks, improves the command and control process and enhances situational awareness. It helps gather and share information and integrates several navigation, weapon and sensor systems. BES features a battle-proven intuitive touchscreen user interface de-signed to be used in vehicles moving over rough terrain.

C4I Connectivity

C4I Bridge is a connectivity gateway, interconnect-ing different C4I systems into one seamless coalition command and control system. Modular architecture of BRIDGE shares the same design principles with other MIL products thus ensuring maximum expandability and connectivity. All filtering and data transformation is configuration based minimizing the need for fre-quent software upgrades.

37

PRED

ILN

ICA

LITI

JA D

.O.O

. Predilnica Litija d.o.o. Kidričeva ul. 1SI-1270 Litija

T: +386 1 89 90 200 F: +386 1 89 90 248 E: sales@litija.comW: www.litija.com

Predilnica Litija is producer of special yarns made of natural and synthetic fibers and their blends estab-lished in year 1886. We pay special attention also to high performance fibres for protective clothing with different functionalities. A part of our production pro-gramme/ range is for years focused on producing spe-cial yarn blends for uniforms. With careful selection of the best raw materials in combination with the best spinning processes and practices we help our cus-tomers to create products with the desired functional properties for uniforms, professional and active wear.

Personal Protection Equipment (PPE) Abrasion Resistancy:• durability • comfort • lightweight strength in CORDURA® brand qualifying

yarn blends such as: • cotton / INVISTA T420 polyamide 6.6 • INVISTA T420 polyamide 6.6 / cotton / lyocell

TENCEL• cotton / INVISTA T420 polyamide 6.6 / elastane

XLACORDURA® is a trademark of INVISTA for durable fabrics.

• other blends like:• cotton/polyester with regulated IR remission

High Performance Products offering Flame Retardancy:with Modacrylics FR in 100% and in blends with cot-ton, Lenzing FR, viscose, modal etc.• soft, warm and resilient• easily dyed, outstanding resistance to chemical

agents, metal splash resistant, arc-flash protec-tive, not toxic & non-allergenic, no moth or mildew threat

with Meta-Aramids in 100% and in blends with cotton, Lenzing FR, viscose, modal etc.• good resistance to abrasion, low flammability, non-

melt, wearability and folding endurance

with Para-Aramids: • improved strength-to-weight properties

Additional Antistatic Property • achieved by adding 2-3% of antistatic fibre in the

final yarn

From above quoted fibres and their properties we are capable to produce high performance protective clothing which protects people (soldiers, firefighters, policemen) from fire, cuts, bad weather conditions or even electromagnetic waves. Together with our part-ners we can offer you also a final product.

MORH

38

SeanTech L.t.d.Mekinčeva ulica 15, SI-1000 LjubljanaT: +386 5 33 11 700, F: +386 5 33 11 709E: info@seantech.eu, W: www.seantech.eu

SeanTech, process engineering, L.t.d. is a privately owned Slovenian engineering company present on the domestic and global markets with tailor made solutions of process equipment.

SeanTech L.t.d. is the legal successor of the company Gostol-Gopan d.o.o. for the product range of process equipment with “Gostol” brand name and Gostol know-how.   In fact SeanTech L.t.d. is Gostol-Gopan’s former Division of Process equipment with over 60 years tradition and references since 1947.

One of SeanTech’s product ranges is a highly developed dual-use equipment for production of energetic material for civil and defence industry purposes: Kneading Machines, Cutting Machines, Rolling Mills, Mixers, Presses etc. all in accordance with Directive 94/9/EC (ATEX).

SeanTech L.t.d. presents:

KNEADING MACHINES are designed for kneading, mixing and homogenizing of pasty media.

Key benefits:• optimal performance by using two parallel,

horizontal mixing arms;• mixing arms rotating at different rotating speed

one against the other;• motor or hydraulic drive;• double bottomed mixing bowl for flow heating,

cooling or constant temperature maintaining;• heating media: steam, thermo oil or water;• emptying of the bowl by its overturning;• PC/PLC control and monitoring of the technological

process in the Kneading Machine;• custom design; long term performance.

CUTTING MACHINES are designed for cutting extruded energetic material of different shapes into smaller stripes, squares, cylinders and offer the following key benefits:• adjustable cutting length, very high accuracy;• PC/PLC control and monitoring of the process;• custom design; long term performance;

Cutting machines types:

• The Cutting Machine type »Guillotine« is designed for cutting bundles or strips of extruded energetic material.

• The Rotary Cutting Machine is designed for cutting extruded energetic material with round shaped cross-section.

• The Cutting Machine type P-4 is a table cutting machine with one channel designed for cutting energetic material stripes and blocks.

• The Cutting Machine type CM is designed for cutting partially dried energetic material tubes and sticks.

SEANTECH

L.T.D.

39

ROLLING MILLS are designed for dewatering, gelatinization and final shaping (thickness) of energetic material with the following key benefits:• adjustable parameters, very high accuracy;• PC/PLC control and monitoring of the process;• custom design; long term performance;

Types of Roll Mills:

• The Differential Rolling Mill:

• The Final Gelatinization Rolling Mill:

• The Fine Rolling Mill is designed for final shaping of thickness of energetic material sheets.

For more technical information please request a leaflet on SeanTech’s e-mail: info@SeanTech.eu.

MIXERS are designed for mixing and homogenizing of pasty, liquid or powder media with the following key benefits:• adjustable parameters, very

high efficiency;• PC/PLC control and monitoring

of the process;• video control and monitoring of

the process;• custom design; long term

performance;

PRESSES are designed for pressing and extruding of energetic materials. The key benefits are:• adjustable parameters, very high

efficiency & accuracy;• PC/PLC control and monitoring of the

process;• video control and monitoring of the

process;• custom design; long term

performance;

Types of Hydraulic vertical press HVP-450:• HVP-450/2 - with two hydraulic

cylinders• HVP-450/1 - with one hydraulic

cylinder

SEAN

TECH

L.T.

D.

Types of Mixers:

• The Mixing drum MP-1000 is designed for mixing or polishing the energetic material’s surface with graphite or other agents.

• The Homogenizer MH-5000 is designed for mixing or homogenizing of energetic material granules and other agents.

• The Vertical Planetary Mixer VPM-600 is designed for mixing nitrocellulose and alcohol with nitro-glycerine and chemical additives.

40

Supporting limits

R 3 - ANTENNA CONTRO LERK SYSTEM L

Rk3 is new system device developed with care to fulfill demanding requirements of antenna systems. RK3 offers devices integrated into

a single unit offering 3 independent channels for controlling antenna rotators and motorized masts (more motor channels on special request).

Five additional module compartments for various RF signal distribution modules. Custom designed functional modules can also be integrated on request.

Compact design saves valuable rack space, especially in mobile applications and simplifies system design and integration.

RK3 provides power for DC and AC motors at 12 or 24V and max. 8A per channel.

Device can be controlled with keyboard on device itself, remotely with remote panel with PC via serial RS232 connection or through Ethernet .

integrate

, and tablet

UNIQUE SOLUTION

S-TMM Sistemi d.o.o. Zabrv120, SI 1292 Ig Tel:+386 1 4202490 Fax:+386 1 4202495- info@s-tmm.si www.s-tmm.si

ANS-P-1000WPORTABLE POWER SUPPLY SYSTEM

ANS-P-1000W is an autonomous power system integrated in a robust carrying case. System ANS-P-1000W is designed to provide a DC voltage 12V and

230V AC power variety of customers where we do not have the possibility of using the mains.

The main elements of the system are Li-Ion battery 12/100Ah, BMS battery management system and 1000W power inverter 12VDC/230VAC control

and display management system.

PERFECT SOLUTION

Li-ion

S-TMM Sistemi d.o.o.Zabrv 120SI-1292 Ig

T: +386 1 4202490F: +386 1 4202495E: info@s-tmm.siW: www.s-tmm.si

S-TMM

SISTEMI D.O

.O.

41

Supporting limits

S-TMM Sistemi d.o.o. Zabrv120, SI 1292 Ig Tel:+386 1 4202490 Fax:+386 1 4202495- info@s-tmm.si www.s-tmm.si

The company is primarily engaged in the design and construction of RF systems, integration, maintenance and education

of end users. This enable our clients to achieve the best results.

For needs of our customers, we are planning antenna systems, perform installations and measurements on the RF field.

Our references;

Ministry's of Defense, Airports, Police, Agency's for Radio frequency spectrum supervision and the mobile operators.

To serve our customers on higher level we developed our own products and designed outstanding solutions.

Comprehensive solutions that create added value

RK3 - ANTENNA SYSTEM CONTROLLER

ANS-P-1000W PORTABLE POWER SUPPLY SYSTEM

TRANSPORTABLE - Standalone measuring unit

Measuring vehicle – inside mast

REMOTE - Standalone - Solar and Wind powered measuring Unit with

Weather station.Where no other electricity supply is available.

Measuring vehicle – outside mast

S-TM

M S

ISTE

MI D

.O.O

. S-TMM Sistemi d.o.o.Zabrv 120SI-1292 Ig

T: +386 1 4202490F: +386 1 4202495E: info@s-tmm.siW: www.s-tmm.si

42

TIVAL ANTEN

E D.O.O

.Tival antene d.o.o.Gorenjska cesta 25SI-1234 Menges

T: +386 1 831 43 96F: +386 1 831 33 77E: info@trivalantene.siW:www.trival-antennas-masts.com

TRIVAL ANTENE d.o.o. main activities are:• development and production of antennas, masts

and accessories for wireless telecommunications;• development, engineering, project-making and

consulting in the field of wireless telecommunica-tions

TRIVAL antennas made of composite materials (poly-ester and epoxy resins reinforced with fibreglass) were first produced back in 1965, on the premises of the SVIT Kamnik company. Today Trival Antene d.o.o. has on its list more than 200 different types of antennas, antenna masts and accessories. Apart from military items, the company supplies products for civil profes-sional use (marine applications, industry and organ-isations, ministries, radioamateurs, mobile comm’s, etc.)

TRIVAL Co. products are subdivided as follows:• military antennas (HF, VHF and UHF antennas, sta-

tionary, tactical and mobile antennas),• antennas for marine applications (MF, HF and UHF

antennas for vessels and yachts),• antennas for civil-professional communications

(HF, VHF and UHF antennas, stationary, mobile an-tennas and antennas for hand-held radios, omnidi-rectional di pole and co-linear antennas, direction-al yagi and log-period ic antennas),

• antenna masts (tubular sectionalised and winch driven telescopic glass-fibre masts from 5 to 18 m)

• antenna accessories (cables, connectors, etc.),• custom designed antennas (antennas for EMC-

measurements, etc.)

Antennas

The TRIVAL ANTENE company develops and produces military antennas in HF, VHF and UHF frequency range for tactical transportable, mobile or stationary use. The antennas are whip-type monopoles, omni-direc-tional or directional antennas (yagi or log-periodic type).

They are usually made of composites (epoxy or pol-yester, glass-fibre reinforcement), with stainless steel metal joints. All antennas for military use comply with MIL-STD-810F.

Antenna masts

TRIVAL antenna masts may be divided into two types: tubular sectionalised and telescopic winch driven masts. All masts are made of composite materials, up to 18 metres high. All mast types are intended for tactical use with included - guying accessories kit. Tel-escopic masts are also suitable for mobile use (includ-ing mounting kit accessories).

43

MEASUREMENT INTERFACE PR-12

The PR12/T-55 measurement interface is intended for quick checking of the voltages and currents on the connector of the AMT_STP2 (AB-T54B) amplifier in the gun stabilizer of the T5* serier main battle tanks. It fits mechanically directly on the amplifier connector. It can measure the input and output voltages of the amplifier, and the supply voltages, currents and fre-quency.

It is powered by a built-in rechargeable 9V 120mAh NiCd battery.

PR-12 is shipped with a suitable battery charger, with a 230VAC power plug. The 14V/AC output includes a connecting cable with the required DC connector that fits PR-12.

The PR-12 can measure 15 different electrical quanti-ties in the STP-2 stabilizer, which are accessible on the amplifier connector.

In most measurements, the readout is calibrated in % of the nominal value, so that “100.0” on the display corresponds to the nominal value of the measured quantity.

GUN STABILIZATION AMPLIFIER AMT-STP2 (T55)

The AMT-STP2 amplifier is a direct replacement for the original tube based servo amplifier used in the stabi-lizer systems of the T5* series main battle tanks.

The AMT-STP2 amplifier is 100% mechanically and electrically compatible with the original amplifier, and can be used as a drop-in replacement.

The AMT-STP2 amplifier has the following advantages over the original amplifier:

• Better lifetime stability -no re-adjustment because of aging tubes

• Less maintenance required

• Better thermal stability (less change of parameters during warm-up)

• Better stability of the amplification

• Better calibration sensitivity of the azimuth and el-evation potentiometers

• better mechanical stability

• Lower power consumption (no tube heaters) means cooler operation

VR-E

LEKT

RON

IKA,

D.O

.O. VR-elektronika, d.o.o.

Pod Hruševco 48 FSI-1360 Vrhnika

E: vr.elektronika@siol.netT: +386 1 750 24 35F: +386 1 750 24 36

44

SLOVEN

IAN DEFEN

CE INDUSTRY CLUSTER / CH

AMBER O

F COM

MERCE AN

D INDUSTRY O

F SLOVEN

IA

The Chamber of Commerce and Industry of Slovenia - CCIS

• With over 150 years of tradition, voluntary membership, and by far the largest number of members, the CCIS is the most influential business association in Slovenia

• Offering the collective wisdom and rich experience of more than 100 experts and specialists

• Uniting commerce, industry, tourism and service sectors in Slovenia

• As a member of Eurochambres and the ICC, as well as other international associations and organisations, the CCIS is part of an extensive international network with innumerable contacts

• References and experience in the realisation of EuropeAid programmes such as Asia Invest, AL Invest, Gateway to Japan, Executive Training Programme for Japan and Korea…

At Your Service

Chamber of Commerce and Industry of Slovenia – CCIS Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 000, F: +386 1 5898 100 E: info@gzs.si W: www.gzs.si/eng

Our staff are at your service and will provide you with all the information you need!

SLOVENIAN DEFENCE INDUSTRY CLUSTERGrozd obrambne industrije Slovenije (GOIS)

The Slovenian Defence Industry Cluster (Grozd obrambne industrije Slovenije – GOIS) is a business association based on the economic interest of our members. It was established in 2008 and brings together Slovenian suppliers of defence, security and protection products and services.

The Cluster assists its members with the creation of optimal conditions for the research, development, production, testing, maintenance, trade and marketing of their products and services in the areas of defence, security and protection.

We offer services such as the following:

• Promoting Slovenian defence & security industries in Slovenia and abroad.

• Promoting and creating opportunities for the international cooperation of Slovenian companies.

• Assisting via cooperation with international defence & security industries and their associations.

• Assisting foreign companies when seeking to establish contacts with Slovenian companies.

• Assistance and consulting services for offset obligors.

GOIS Slovenian Defence Industry ClusterDimičeva 13, SI-1504 Ljubljana, SloveniaT: +386 1 5898 423F: +386 1 5898 100E: info@giz-gois.siW: giz-gois.si

45

MOUNTAIN WARFARE IN FUTURE NATO OPERATIONSMilitary mountaineering in Slovenia has a rich history, which culminated in the establishment of the Slovenian Military Mountain School in 1996, as a provider of professional training. In addition to regular training of Sloveni-an Armed Forces’ units, the school conducted courses for NATO Nations and Partners as part of bilateral military cooperation, as well as in the preparation for the deployment of contingents to crisis response operations.

On March 25th 2015 Memorandum of Understanding to establish NATO MW COE has been signed among ACT, Croatia, Germany, Italy and Slovenia in Washington. Austria will participate as a partner nation.

The NATO MW COE represents the core with the required professional skills to develop standardized training. Demanding terrain and climate has always been a great challenge to perform all forms of military operations.

With the support of the Nations, the proposed NATO MW COE is the tool to achieve this level of standardization and interoperability in mountainous environment, with the intent to support the NATO smart defense approach.

Director NATO MW COE Colonel Boštjan Blaznik

Contact: Nato MW COE, Poljče 27, SI-4275 Begunje na Gorenjskem, E: bostjan.blaznik@mors.si, F: +386 4 533 3807

46

Slovenian Armed Forces

www.slovenskavojska.si

Photo: Bruno Toič

GOIS Slovenian Defence Industry ClusterDimičeva 13, SI-1504 Ljubljana, SloveniaT: +386 1 5898 423, F: +386 1 5898 100El: info@giz-gois.si, W: http://giz-gois.si