sludge receiving station in stainless steel › ... › uploads › 2016 › 04 ›...
TRANSCRIPT
![Page 1: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic](https://reader031.vdocument.in/reader031/viewer/2022011904/5f1d8a1eb146120a885fa1ba/html5/thumbnails/1.jpg)
Sludge Receiving Station in Stainless SteelSRS
Main areas of use and features• Receiving station for mechanical treatment of septic
sludge from tank lorries.• Self-cleaning Rotoscreen with a following screw
wash press.• Capacity of 1-4 m3 /min.
• Can be combined with a sedimentation tank.• Add on pinch valve and flow meter.• High surface finish guarantees a long lifetime.
![Page 2: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic](https://reader031.vdocument.in/reader031/viewer/2022011904/5f1d8a1eb146120a885fa1ba/html5/thumbnails/2.jpg)
SRS SLUDGE RECEIVING STATIONArea of use Meva Sludge Receiving Station SRS is used for mechanical treatment of septic sludge from tank lorries. Meva SRS consists of a Meva Rotoscreen and a Meva Screw Wash Press.
The equipment is delivered in an already assembled, compact tank in stainless steel. The result is a versatile and efficient solution with high reliability.
The sludge receiving station delivers a clean and dry sludge, resulting in reduced sludge volume meaning reduced transport- and deposit costs.
FunctionSludge is fed into the tank and led through the Meva Rotoscreen, where it is cleaned from solids. Thereafter, the screenings are washed, dewatered and pressed in a screw wash press. The washed and dewatered screenings are transported to a container by a discharge pipe or an optional Counter Pressure Screw CPS.
The entire treatment process takes place in a compact, enclosed system which reduces common odour problems to a minimum.
The fine screen can be equipped with a spray bar to increase the screening efficiency. Meva Rotoscreen is insensitive to grease, rags and sand and therefore well suited for receiving sludge. It can be supplied with a 3 or 6 mm slot width.
![Page 3: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic](https://reader031.vdocument.in/reader031/viewer/2022011904/5f1d8a1eb146120a885fa1ba/html5/thumbnails/3.jpg)
Meva Sludge Receiving Station SRS:
• Receiving station for mechanical treatment of septic sludge from tank lorries.
• Self -cleaning Rotoscreen with a following screw wash
press.
• Capacity of 1-4 m3 /min.
• Can be combined with a sedimentation tank.
• Add on pinch valve and flow meter.
• High finish guarantees a long lifetime.
Meva SRS: Effective, compact, capsulated
No odour problems due to the capsulated system
Meva SRS with an automated grit trap. Screen connected to SWP and CPS.
![Page 4: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic](https://reader031.vdocument.in/reader031/viewer/2022011904/5f1d8a1eb146120a885fa1ba/html5/thumbnails/4.jpg)
S113
4-En
-19.
07
Nordic Water Products AB • Alfagatan 5 • SE-431 49 Mölndal • SwedenTel: +46 31 748 54 00 • [email protected] • www.nordicwater.com