sm-r400(smart-r400) quick reference manual_ver 2.02
TRANSCRIPT
Bluetooth UHF RFID Reader
Smart -R400
User friendly Manual
1. Smart-R400 SPEC
EPC Gen2(ISO 18000-6C)
860MHz to 960MHz (Customizable)
27dBm±1dBm(0.5W)
5dBm to 27dBm(1dB step)
6 (Korea), 50(USA), 4(EUROPE)
600KHz (Korea, EUROPE), 500KHz(USA)
< 0.4 seconds
PR-ASK
5pin USB (chargeable thru USB)
Bluetooth (SPP Baud rate: 115200bps )
850mAh Li-ion Battery (3.7V)
90mm x 45mm x 15mm
20°C to 70°C
-10°C to 50°C
KCC, FCC, CE- on going
- Protocol
-Frequency
-Max. Tx Power
-Power Control
-Hopping Channels
-Channel Spacing
-Channel Dwell time
- Modulation Method
- Interface
-Battery
- Dimension
- Storage Temperature
- Operating Temperature
- Certification
2. Component of Smart-R400
Smart-R400 RFID Reader
Device Manual Micro USB 5Pin to USB
Cable
Bluetooth LED
Tag Read Indicator
Power button
Battery Status LED,
Low-battery LED
Necklace hole
Power LED
Left side
Left side
Brand logo
Customizable
Reset button
Top side
Right side
RFID Ant Position
Battery Position
Bottom/Micro USB
3. Appearance of Smart R-400
Power ON/OFF Press more than 2 second, power ON/OFF
Charge Description and Alarmed lack of Bettary LED
Red light on during battery charging, Green light on after Full Charged,
Lack of battery when the blinking Red lights.
Power ON Display and RFID reading Display process
LED
When power ON, Green light ON. The Green LED blinking, When activate the
RFID Tag Reading.
Bluetooth Connection Display LED
The Blue LED ON, When connect Smart Phone and Bluetooth.
Reset Button
Battery Charge Connector Micro USB 5PIN connector
Status display LED of RFID reading
The Green LED blinking, When activate the RFID Tag Reading.
3. Description
4. System Composition Diagram Bluetooth Mode
4. System Composition Diagram USB Mode
☞ Demo Application File Name.
- Reader@Express V3.6.3 for Windows.zip
☞ Operating System
- Window 7 32bit
5. How to use on PC (PC Mode)
1. Smart R-400 Device ON 2. Control Panel > Device and Printer > Additional device > Choose the “Blue Angel” or “SmarTerminal” Device
Windows 7 (32bit)
3. Pin Number is “0000” 4. Check the connection with Bluetooth
Windows 7 (32bit)
5. Check the Port Number (Will need it)
Windows 7 (32bit)
6. Run the
“Reader@Express V3.6.3 for Windows”
Windows 7 (32bit)
6. Choose the Port Number (The Top of the Left
side), Confirm the RFID activation.
Check the USB Box.
And reset R400 device and program.
7. Set up USB Mode (in COM port box)
Play “reader program”
Windows 7 (32bit)
USB
Caution
– Set POWER level less than 27 from Combo box and use.
– Please do not assign USB COMport number over comport # 10,
the application many not recognize the device if comport number is
over 10. (11,12,13,ete..)
– There’s some USB compatibility issue with Windows XP at the
moment, we are working on it now. (Will be revised)
Windows 7 (32bit)
☞ Demo Application File Name.
- 9.4.4 Android(Bluetooth) Host Library SDK for Impinj.zip
☞ Operating System
- Android
5. How to use on Android (BT Mode)
1. Smart R-400 Device ON
• This Application is not on the Android Market because it’s SDK sample program for developer.
User can install it from PC by following instruction.
2. Prepare your Android Smart phone and its USB data
cable. Down load USB driver from your Smart phone
manufacturer web page and install it on your PC.
Android
3. Connect your Smart Phone to
PC thru data cable 4. Makes “APK” Folder in the Android phone folder,
added ‘ReaderApiBlueDemo.apk’.
Android
5. File manager > APK Folder 6. Down load ‘apk’ file.
Android
7. Search and select Bluetooth
Android
8. Pin cord “0000” 9. Inventory Click 10. RF Tag Reading > STOP
Android
0000